Professional Documents
Culture Documents
Just like a road bridge routes the traffic from one point to another, in the same way a cable tray
system is a structure that routes electric cables. A cable tray system may either be a standalone
unit or an assemblage of units working in synergy to lend support to cables in a rigid manner.
Through the raceway, the cable tray underlies the wire layout across exposed spans in the
electrical system. Depending upon the application and type of structure of the Cable Tray
system, there are various types of cable tray systems available.
Types of Cable Tray
Ladder cable tray as the name suggests resembles a ladder. It has two longitudinal members
which are connected by multiple transverse members at regular intervals. Ladder cable tray is
preferred when the support span is intermediate to long. The tray comes in a range of widths,
depths, lengths and run spacing with the spectrum extending up to 36 ,6,24,18 inches
respectively.
Solid bottom cable tray is preferred in applications where the operating voltages are
relatively lower and hence there is minimal ventilation requirement to dissipate the heat. These
are primarily used where support spans are short to intermediate. Smaller instrumentation,
telephone, computer, telecom and fiber optic cable can be routed from one location to another
using a solid bottom cable tray. Protective layering made with metal, fiber glass and other
materials are used for non-ventilated support.
Trough cable tray, either metallic or non-metallic, is preferred for cables that have moderate
heat dissipation and hence need lesser ventilation than ladder cable. Cable support is provided at
every 4 inch using transverse or radial members. The support span extends from 5-12 feet and
maximum width, depth, length and fixed rung spacing are 36,6,24 feet and 4 inches respectively.
Plot No. 289-290, Manjusar GIDC, Nr.Bombardier Circle, Manjusar Savali Vadodara - 391775
Phone : (0265) 2632517 (O), Mobile : +91 8000842648; E- mail : info@galvanizers.co.in
Tanya Galvanizers
Channel cable trays are employed in areas where conduits are not used and minimal tray cables
are required. Such tray is used for support span ranging from 5-10 feet. The standard width and
length extends to a maximum of 8 inches and 24 feet respectively.
Wire mesh cable tray can be customized to suit site requirements for telecom and fiber optic
cables at low voltage. The tray is zinc plated with wire mesh configuration. The standard width,
depth and length spans to a maximum of 24 in, 4 in, and 10 feet respectively.
Single rail cable tray can be installed relatively faster compared to other trays. Cable can be laid
with ease for convenient entry and exit. The tray is useful for power cable applications where
low voltage is involved. The tray can be mounted on walls in single or multitier manner. The
standard width, depth and length spans to a maximum of 24 in, 6 in, and 12 feet respectively.
Plot No. 289-290, Manjusar GIDC, Nr.Bombardier Circle, Manjusar Savali Vadodara - 391775
Phone : (0265) 2632517 (O), Mobile : +91 8000842648; E- mail : info@galvanizers.co.in