Scribd Logo
Upload

Welcome to Scribd!

  • Mathworks Simulink and Ni Instruments

    Uploaded by

    AntoneRaj
    14 views22 pages
    Here is the circuit diagram of 1 Kilo watt inverter using IC CD4047 and MOSFET 3205. The circuit is simple low cost. CD 4047 is a low power CMOS astable/monostable multi vibrator IC. Here it is wired as an astable multi vibrator producing two pulse trains of 0.01s which are 180 degree out of phase at the pins 10 and 11 of the IC. Pin 10 is connected to the gate of Q1,Q2 and pin 11 is connected to the gate of Q3,Q4. Resistors prevents the loading of the IC by the respective MOSFETs. When pin 10 is high Q1,Q2 conducts and current flows through transformer primary in one direction ,when Q3,Q4 conducts current flows through transformer in opposite direction which accounts for the positive half and negative half of AC voltage in transformer.

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Report this Document
    Here is the circuit diagram of 1 Kilo watt inverter using IC CD4047 and MOSFET 3205. The circuit is simple low cost. CD 4047 is a low power CMOS astable/monostable multi vibrator IC. Here it is wired as an astable multi vibrator producing two pulse trains of 0.01s which are 180 degree out of phase at the pins 10 and 11 of the IC. Pin 10 is connected to the gate of Q1,Q2 and pin 11 is connected to the gate of Q3,Q4. Resistors prevents the loading of the IC by the respective MOSFETs. When pin 10 is high Q1,Q2 conducts and current flows through transformer primary in one direction ,when Q3,Q4 conducts current flows through transformer in opposite direction which accounts for the positive half and negative half of AC voltage in transformer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    14 views22 pages

    Mathworks Simulink and Ni Instruments

    Uploaded by

    AntoneRaj
    Here is the circuit diagram of 1 Kilo watt inverter using IC CD4047 and MOSFET 3205. The circuit is simple low cost. CD 4047 is a low power CMOS astable/monostable multi vibrator IC. Here it is wired as an astable multi vibrator producing two pulse trains of 0.01s which are 180 degree out of phase at the pins 10 and 11 of the IC. Pin 10 is connected to the gate of Q1,Q2 and pin 11 is connected to the gate of Q3,Q4. Resistors prevents the loading of the IC by the respective MOSFETs. When pin 10 is high Q1,Q2 conducts and current flows through transformer primary in one direction ,when Q3,Q4 conducts current flows through transformer in opposite direction which accounts for the positive half and negative half of AC voltage in transformer.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Flag for inappropriate content
    of 22

    MATHWORKS AND SIMULINK

    MATHWORKS AND SIMULINK

    MATHWORKS AND SIMULINK

    MATHWORKS AND SIMULINK

    NI INSTRUMENTS

    HARDWARE

    HARDWARE PLATFORM

    HARDWARE PLATFORM

    SOFTWARE PLATFORM

    LABVIEW SOFTWARE

    DATA ACQUISITION (DAQ)

    DATA ACQUISITION APPLICATION

    MODUALR INSTRUMENTS

    PXI PLATFORM

    NI INSTRUMENTS CONTROL

    NI APPLICATIONS

    NI APPLICATIONS

    You might also like