Ales
(FLUID ENERGY MILLS)
Mills for Fine Micronizing of Solids
Micronizing of solids of chemicals, pigments,
pharmaceuticals, minerals, agrochemicals,
thermoplastics and others like heat
sensitive, corrosive and abrasive materials.eee oe
Jet Mills (Fluid Energy Mills) are used for
micronizing of solids of agro-chemicals, chemicals,
pigments, minerals, pharmaceuticals,
thermoplastics and other like heat sensitive,
‘corrosive and abrasive materials.
Jet Mills operate in compressed air, gas or high
pressure superheated steam. These mills have no
moving. parts, thereby eliminating contamination
‘duo to contact with oxternal grinding modia. No
attrtional heat is generated during grinding making it
the ideal process to grind heat-sensitive and waxy
substance,
Tho mills aro supplied with a rango of auxiliary
PRINCIPAL OF OPERATION
Jet Mill works on fluid energy. Micronizing and
classification take place in a shallow, cylindrical
chamber. High pressure air or steam is injected in
this chamber through the spacially designed nozzles
placed at regular distance, on the peripheral wall
Tho axis of oach jet is tangential to the
circumference of a smaller, imaginary, concentric
circle.
During operation, thase jets generate a high speed
vortex inside the chamber and the materials ted
through a separate venturi systom, which creates a
partial vacuum to suck the material into this high
velocity vortex. Strong velocity gradients near the jet
cause the suspended particles of the material 10
collide with each other and reduce themselves by
attrition and collision. The jet fluid exits through an
outlet at the center of the chamber either from top
and draws the micronized particlos with it to tho
cyclone collector system. Heavier oversized
patticles are held in the grinding chamber by
centuifugal force, until micronized to a desired size,
EXAMPLE OF ONE PRODUCT
(MICRONIZED IN JET MILL)
ii eens OmeZy
PARTICLE SIZE (MICRON) —>
ott
PARTICLE
DISTRIBUTION
alll,
Particle Distribution
1d 60=3 micron
4.90 =5 micron
97 =7 micron
‘Maximum Particle Size = 20 micron
In general input feed size of 200 mesh with air
pressure of 7kg/sa. cm, adequate quantity of air and
controlled feed give better results. Seiting of
microfiner also plays an Important role. However,
final rosults can be dorived by trial. Finenoss and
‘output depends upon material characteristics and
other factors.Peasy Pret temo a eau)
Agrochemicals | BHC, DDT, Deltamethrine, Carbendezim, Carbaryl, Germicide, Herbicide, Fungi
Sulphur ete.
Chemicals Adipic acid, Barium titanate, Calcium chloride, Chrome oxide, Catalysts, TCC etc.
Ceramics Aluminium hydrates, Silicon carbide, Ferrites, Glass, Zirconium oxide etc.
Metals Molybdenum disulphide, Noble metal, Copper ete.
Minerals Bauxitem Calcite, Gypsum, Graphite, Mica, Tale, Tentalum ore etc.
Paints Carbon black, Fluorescent pigments, Printing ink atc.
Pharmaceuticals
Albendazole, Antibiotics, Aspirin, Cosmetics, Bulk drugs, Dichlofenac sodium,
Glybeneclamide, Furosemide, Omeprazole, Oxfendazole ete.
Plastics
ABS resins, PVC stabilizers, Phenolics, PTEF etc.
Others
Asbostos, Chocolate, Food colours, Fuller earth, Procipitated silica, Silvorflako, Tonor,
Wax, Wolframite ore etc.
JET MILLSeee oe
TECHNICAL SPECIFICATIONS
ere
pe re a a
oo se 7
sn = = SRT ERS
Specitestions and dasigns are subject ta change without note.
Detorentcasigns canbe otras or erent appleatons.
Aver
Production cepecty, neness andKW ol mato are nominal ony and vay fom
1 to case deponding upon cove fectore
ed sizeof materials ls 200 mesh wth opetating pressic in between 7-9 kpcm2, bu resis widely depend on mattalcharactrst.
OTHER RANGE OF PRODUCT
CENTRIFUGES
# MANUAL TOP DISCHARGE
# BAG LIFTING TYPE
# BOTTOM DRIVEN BOTTOM DISCHARGE
WITH SCRAP
REACTION VESSEL
FLUID ENERGY MILLS (JET MILLS)
AIR CLASSIFYING MILLS (ACM)
‘CORPORATE OFFICE & WORKS :
(Opp. Block Development tie, Dali Road, Meerut - 250 002 (U.P) India
NSI EQUIPMENTS PVT LID
(An ISO 9001:2000 Certified Company)
‘Tel: (0) 91-121-2519225, 2526056 Facsimile: 491-121-2521 154
E-mail: info@rsiequiment.com * Website: wiw.nsiequipment.com
ROTARY VACUUM DRIERS
BUCKET ELEVATORS
SCREW CONVEYORS
IBBON BLENDERS
BELT CONVEYORS
FLUID BED DRIERS
DRUM DRIERS AND FLAKERS
ROTARY DRIERS
ROTARY KILNS
coiowat ornce ‘sora eeORANR
734, Mount Road, Chennai ~600 006, Tamil Nadu, India.
“eleFax: +91-44-28297539, 09843027957
E-mail: nsie@vsn.net/kannandinsiequipment.com