Professional Documents
Culture Documents
ABSTRACT
AIM:
The main objective of this project is to develop an embedded system, which will
control the electrical parameters at the industries using a microcontroller and touch
panel.
IMPLEMENTATION:
This project is implemented 8051 based At89s52 developed board interfaced with
touch panel, relay of connecting the devices, LCD for displaying the data.
BLOCK DIAGRAM:
Relay 1
TOUCH PANEL
Light
MAX232
MICROCONTROLLER
RPS
CRYSTAL
LCD
AT89S52
Relay 2
DC motor
Relay 3
DC Fan
POWER SUPPLY:
Step Down
Transformer
Bridge
Rectifier
Filter
Circuit
Regulator
section
DESCRIPTION:
Automation is controlling of light, climate, doors and window shutters and many
more which we can control manually in our daily life. In this project we are using
at89s52 microcontroller interfaced with touch panel for controlling the equipments in the
industries. This automation system can also be used for industrial applications with small
modifications.
In this project we are using at89s52 microcontroller for controlling the
equipments in the industry. The controlling operations are performed by the controller
which will be present at work centre. Devices are interfaced to the microcontroller
through relays. Relays are used to either switch ON/OFF the devices through touch panel.
When the keys are pressed the respective devices will remain either ON/OFF.
The system uses a compact circuitry built around Flash version of AT89S52
microcontroller. Programs are developed in embedded C. ISP is used to dump the code
into the microcontroller
SOFTWARE:
Embedded C
RIDE to write code
HARDWARE:
At89s52 based our own developed board
Power Supply
keys
RELAY
Light
DC Fan
DC motor
ADVANTAGES: Low cost, automated operation, Low Power consumption.
REFERENCES
1. The 8051 micro controller and embedded systems by Mazidi.
2. www.wikipedia.org
3. WWW.ATMEL.COM
4. WWW.8051PROJECTS.COM
5. Embedded systems with 8051 by kenith j ayala