Professional Documents
Culture Documents
Leica
DISTO
Leica DISTOTMD510
X310
The original laser distance meter
The original laser distance meter
Table of Contents
EN
Instrument Set-up
-------------------------Introduction - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Basic measuring screen - - - - - - - - - - - - - - - - - - - - - - - - - - - Selection screen- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - Insert batteries - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2
2
2
3
3
4
4
Operations - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
5
5
5
5
5
6
6
Switching ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Clear - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Multifunctional endpiece - - - - - - - - - - - - - - - - - - - - - - - - - - Permament / Minimum-Maximum measuring- - - - - - - - - - - - Add / Subtract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Pointfinder (Viewscreen)- - - - - - - - - - - - - - - - - - - - - - - - - - -
Settings
------------------------------------- 7
Overview - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Tilt units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Distance units - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Beep ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
Digital level ON/OFF - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 8
De-/Activate keypad lock - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Unlock keypad- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Personalized favorites - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
Illumination - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 9
De-/Activate Bluetooth Smart - - - - - - - - - - - - - - - - - - - - - - 10
Calibration of tilt sensor (Tilt Calibration) - - - - - - - - - - - - - - 11
Reset - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Offset- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
13
13
13
13
14
Memory- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 14
Measuring single distance - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Smart Horizontal Mode - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Height-profile measurement - - - - - - - - - - - - - - - - - - - - - - - - 16
Area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
Volume - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Triangular area - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Long range mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Inclination tracking- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Sloped objects - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Height tracking - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
Trapezium - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Stake out - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
Pythagoras (2-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
Pythagoras (3-point) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 25
Technical Data - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
Message Codes - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Care- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - 27
Areas of responsibility - - - - - - - - - - - - - - - - - - - - - - - - - - - - 27
Permitted use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Prohibited use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Hazards in use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Limits of use - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Disposal- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Electromagnetic Compatibility (EMC) - - - - - - - - - - - - - - - - - 29
Use of the product with Bluetooth - - - - - - - - - - - - - - - - - - 29
Laser classification - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
Labelling - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 29
Instrument Set-up
Introduction
EN
Overview
Display
WARNING
CAUTION
On/Measure
Pointfinder
(Viewscreen)
Selection keys
linked to symbols above
Navigation
Function
screen
Return /
Equal
Clear / Off
Add /
Subtract
Instrument Set-up
Basic measuring screen
Status bar
EN
Selection screen
Page indicator
Function /
Settings
Main line
Active function
Favorites
Settings
Help
function
Instrument Set-up
Pointfinder (Viewscreen)
EN
Insert batteries
Zoom stage
1x
Illumination
adjustment
with navigation
keys left and
right
Active function
Crosshair
To ensure a reliable
use, do not use zinccarbon batteries.
We recommend
using high quality
batteries.
Change batteries
when battery symbol
is flashing.
Favorites
Operations
Switching ON/OFF
ON
EN
Clear
OFF
i
2 sec
Device is turned
OFF.
Press ON button
2 sec to start
continuous laser
mode. If no key is
pressed for 180
sec, the device
switches off automatically.
Message Codes
1x
2x
Multifunctional endpiece
The orientation
of the endpiece
is automatically
detected and
the zero point is
accordingly adjusted.
max.
2 sec
3
Stops permanent / minimummaximum measuring.
Used to measure room diagonals (maximum values) or horizontal distance (minimum values)
8.532 m
5
Operations
Add / Subtract
EN
2x
7.332 m
3
The next measurement is added
to the previous
one.
7.332 m
20.179 m
12.847 m
Pointfinder (Viewscreen)
4x
1x
4x
1x
2x
2x
1x
1x
Exit pointfinder
(viewscreen).
Settings
Overview
EN
Tilt units
Distance units
Beep
Digital level
Keypad lock
Favorites
Illumination
Bluethooth
Tilt calibration
Reset
Offset
Tilt units
5
Confirm setting.
Exit settings.
Settings
Distance units
1
EN
0.00 ft
0'00" 1/32
0.00 in
0 in 1/32
0.000 yd
5
Confirm setting.
Exit settings.
Beep ON/OFF
3
Exit settings.
To switch ON,
repeat procedure.
OFF
ON
2
To switch ON,
repeat procedure.
Leica DISTO
Exit settings.
OFF
ON
TM
D510 792312
Settings
De-/Activate keypad lock
1
EN
Unlock keypad
To deactivate,
repeat procedure.
within
2 sec
Exit settings.
ON
OFF
Personalized favorites
4
Select favorite
function.
5
Press selection
key left or right.
Function is set as
favorite above the
corresponding selection key.
Exit settings.
Illumination
1/6
4
1/6
2/6
3/6
4/6
5/6
6/6
5
Confirm setting.
Exit settings.
To save
power reduce brightness if not
necessary.
Select brightness.
Settings
De-/Activate Bluetooth Smart
1
3
To switch ON,
repeat procedure.
ON
EN
Exit settings.
OFF
Default mode:
Bluetooth is switched on.
Bluetooth icon in status line is displayed if device is connected with
Bluetooth.
We provide no warranty for free DISTO software and offer no support for it. We accept no liability whatsoever arising from the use of
the free software and we are not obliged to provide corrections nor
to develop upgrades. A wide range of commercial software can be
found on our homepage. Apps for Android or Mac iOS can be found
in special internet shops.
For more details, see our homepage.
10
Settings
Calibration of tilt sensor (Tilt Calibration)
1
EN
4
180
180
180
180
10
After 2 sec
the device
goes back to
the basic
mode.
11
Settings
Reset
EN
Second confirmation with selection
keys:
Refuse:
Confirm:
Exit settings.
Reset
device?
Offset
Select digit.
6
Exit settings.
1.012 m
Adjust digit.
1.012 m
Approve
value.
12
Functions
Overview
EN
Timer
Height-profile Measurement
Calculator
Area
Height Tracking
Volume
Trapezium
Memory
Triangle area
Stake out
Pythagoras 1
Inclination Tracking
Pythagoras 2
Timer
4
30 sec
5 sec
2 sec
Off
Select release
time.
Confirm setting.
Calculator
Select key on
display.
Confirm
every key.
13
Functions
Adjusting measuring reference/tripod
1
EN
Confirm setting.
Memory
12.208 m
6.554 m
Switch between
measurements.
23.889 m
4
Use Up/Down
navigation keys to
show more results.
Short cut
14
Functions
Measuring single distance
1
EN
8.532 m
Target surfaces:
Measuring errors can occur when
measuring to colourless liquids,
glass, styrofoam or semi-permeable surfaces or when aiming at
high gloss surfaces. Against dark
surfaces the measuring time increases.
5.204 m
0.032 m
4.827 m
x
y
z
40.8
1
z
(up to 360 and a transverse
tilt of 10)
15
Functions
Height-profile measurement
EN
5
4
3
1
REF
REF
2.042 m
0.054 m
Horizontal distance to
device
Height difference to
reference point (REF).
Exit function.
16
Functions
Area
1
EN
6.228 m
6
3.9I0 m
20.276 m
24.352 m
First distance
Second distance
Circumference
Area
17
Functions
Volume
1
EN
80.208 m
8
208.703 m
24.224 m
78.694 m
Circumference
Wall areas
Ceiling/floor area
Volume
9
Use Up/Down
navigation keys to
show more results.
18
Functions
Triangular area
1
EN
23.563 m
89.90
23.813 m
Circumference
Use Up/Down
navigation keys to
show more results.
19
Functions
Inclination tracking
1
EN
89.3
90
0
Sloped objects
5.944 m
3.506 m
30.55
6.901 m
Leica DISTOTM D510 792312
7
Use Up/Down
navigation keys to
show more results.
Indirect distance measuring between 2 points with additional results. Ideal for applications such as
length and slope of roof, height of
chimneys,
It is important, that the instrument is positioned in the same
vertical plane as the 2 measured
points. The plane is defined of the
line between the 2 points.
20
Functions
Height tracking
EN
Px
Px
P0
P0
Px
7
6.932 m
9.827 m
x
y = Tracking height if device is
turned on tripod
P0
8
Use Up/Down
navigation keys to
show more results.
21
Functions
Trapezium
1
EN
22.70
78.257 m2
5.907 m
Trapezium area
7
Use Up/Down
navigation keys to
show more results.
22
Functions
Stake out
EN
Two different
distances (a
and b) can be
entered to
mark off defined measured
lengths.
a= b
a= b
1
2
3
b
b
1.012 m
Select digit.
Adjust digit.
Move device
slowly along the
stake-out line.
The distance to
the next stake out
point is displayed.
1.012 m
Approve
value "a".
0.240 m is
missing up to
next 0.625 m
distance.
Adjust
value "b".
i
0.625 m
0.240 m
0.625 m
23
Functions
Pythagoras (2-point)
1
EN
8.294 m
Use Up/Down
navigation keys to
show more results.
24
Functions
Pythagoras (3-point)
1
EN
18.294 m
Use Up/Down
navigation keys to
show more results.
Aim laser at
third target.
25
Technical Data
EN
Distance measurement
Typical Measuring Tolerance* 1.0 mm / ~1/16" ***
Maximum Measuring
Tolerance**
Typical Range*
200 m / 660 ft
Range at unfavourable
condition ****
80 m / 260 ft
0.1 mm / 1/32 in
laser point
at distances
yes
6 /30 / 60 mm
(10 / 50 / 100 m)
Tilt measurement
Measuring tolerance to laser
beam*****
0.2
Measuring tolerance to
housing*****
0.2
Range
360
General
Laser class
Functions
Distance measuring
yes
Min/Max measuring
yes
Permanent measuring
yes
Stake-out
yes
Addition/Subtraction
yes
Area
yes
Triangle area
yes
Volume
yes
Trapezium
yes
yes
Pythagoras
2-point, 3-point
yes
Height-profile measurement
yes
Inclination tracking
yes
Sloped objects
yes
Laser type
Height tracking
Protection class
Memory
30 displays
Beep
yes
after 90 s
yes
after 180 s
Multifunctional endpiece
yes
Bluethooth Smart
Bluethooth v4.0
Pointfinder (Viewscreen)
4xZoom
up to 5000 measurements
Digital Level
yes
Bluetooth Smart
yes
Dimension (H x D x W)
143 x 58 x 29 mm
5.6 x 2.28 x 1.14 in
Personalized Favorites
yes
198 g / 6.37 oz
Timer
yes
yes
Calculator
yes
Temperature range:
- Storage
- Operation
-25 to 70 C
-13 to 158 F
-10 to 50 C
14 to 122 F
yes
26
Message Codes
Care
Safety Instructions
Warranty
No.
Cause
156
162
Calibration mistake
204
Calculation error
Perform measurement
again.
240
Repeat procedure.
252
253
255
256
257
258
260
Correction
EN
Areas of responsibility
Repeat measurement.
27
Safety Instructions
EN
Permitted use
Hazards in use
Disposal
Measuring distances
Tilt measurement
Data transfer with Bluetooth
WARNING
CAUTION
Prohibited use
Using the product without instruction
Using outside the stated limits
Deactivation of safety systems and
removal of explanatory and hazard labels
Opening of the equipment by using tools
(screwdrivers, etc.)
Carrying out modification or conversion of
the product
Use of accessories from other manufacturers without express approval
Deliberate dazzling of third parties; also in
the dark
Inadequate safeguards at the surveying site
(e.g. when measuring on roads, construction sites, etc.)
Deliberate or irresponsible behaviour on
scaffolding, when using ladders, when
measuring near machines which are
running or near parts of machines or installations which are unprotected
Aiming directly in the sun
CAUTION
Never attempt to repair the product yourself. In case of damage, contact a local dealer.
WARNING
Limits of use
Refer to section "Technical data".
The device is designed for use in areas
permanently habitable by humans. Do not
use the product in explosion hazardous areas
or in aggressive environments.
28
Safety Instructions
Electromagnetic Compatibility
(EMC)
EN
Laser classification
WARNING
WARNING
Labelling
Laser Radiation
Do not stare into the beam
Laser class 2
acc. IEC 60825-1:2007
Maximum radiant power: <1mW
Emitted wavelength: 620-690nm
Beam divergence: 0.16 x 0.6 mrad
Impulse duration: 0.2 x 10-9s - 0.8 x 10-9s
WARNING
CAUTION
29
Leica Geosystems AG
CH-9435 Heerbrugg
(Switzerland)
www.disto.com