You are on page 1of 2

INSTALLATION:

1- Uninstall any old version of avast


2- Go to downloaded folder 'Avast! Pro Antivirus 2015 - 10.0.2206'
3- Run the installer 'Avast! Pro Antivirus 2015 - 10.0.2206 - BRSHARES'
4- Click 'INSTALACAO'
5- Click 'INSTALADOR'
6- Install Avast as a 30-day trial (DEMO)
CRACKING:
1- Go to Avast Settings > Troubleshooting > and uncheck 'Enable avast self defense module'
(You should recheck it later when everything is done.)
2- Return to Installer menu, then click 'ATIVADOR' to open the Folder
3- Open 'CRACK' Folder, copy file 'Version.dll', paste it to the folder where avast is installed
(If the file cannot be copied, make sure the 'Enable avast self defense module' is unchecked in
the settings.)
4- Go back to the installer menu, click 'ATIVADOR' to open the folder
5- Run the activator 'Avast License ZeNiX 2014-03-14'
password: ZeNiX
(case sensitive)
(If there's an error, ignore it. The computer will restart)
FINISH!
If your software is Windows XP, proceed to the instructions below:
6- After restarting your computer, Return to installer menu.
7- Click 'ATIVADOR' to open the folder.

8- Double click 'AVAST XP ZeNiX.reg', the registration entries.


(When a message box appears, just click continue and agree to restart the computer again.)
YOU CAN UPDATE IT

You might also like