Partial development involves allowing only some parts
of the photograph to develop by limiting the developing process. 1.Set up the darkroom and enlarger as normal. 2.Select your negative and place it into the enlarger. Manoeuvre the enlarger dials to achieve the correct size and focus for the size of your photographic paper. 3.Place a sheet of photographic paper under the enlarger, making sure the red light filter is covering the light. 4.Turn the enlarger dial to timer. Remove the red light filter and set the timer to about 5-7 secs (a test strip will give you an exact time). Expose your paper to the light for the required time. 5. Rather then placing your image in the developing bath, hold the photographic paper with a pair of tongs and spray some developer on some sections of the