You are on page 1of 565

P R O D U C T

C A T A L O G

J A N U A R Y

2 0 1 2

Table of Contents

POWERWAVE

Table of Contents

Page
Base Station Products and Solutions
Power Amplifier Solutions
MCPA Modules
Single MCPA Outdoor Booster Systems
Dual MCPA Outdoor Booster Systems
Triple MCPA Outdoor Booster Systems
TMA Products
Tower Mounted Amplifiers
Power Distribution Unit
Current Injectors
Filters
Diplexer/Crossband Combiners
Duplexers
Same Band Combiners T1
Triplexer/Crossband Combiners
Interference Filters
RMDU and Enclosure Solutions
MicroFlex Outdoor Enclosures
RapidFlex Outdoor Enclosures
SubTerra Controlled Environment Vault
VersaFlex Shelter Solutions
Coverage Products and Solutions
Repeater Products
Channel Selective Standard Repeaters
Band Selective Compact Repeaters
Band Selective Standard Repeaters
Advanced Train Repeaters
Digital Repeaters
In-Building and Outdoor DAS Products
Repeater Products
Bi-Directional Amplifiers
Fiber Optic DAS Master Unit
LinkNet Convergence Platform
Tap-In Signal Distribution Taps
Nexus FT Public Safety
DAS Products
Wide Band Radio Heads
Nexus FT Single and Dual Band
Nexus FT Rack Mounts
Repeater Remote Management Products
Base Station Management Interface
IP/SNMP/GPS Repeater Remote Management Interface
Antenna Products
Broadband Antennas
Single Broadband Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz
Low Broadband Cross Polarized Antennas, 806-960 MHz
Low Broadband Cross Polarized Antennas, 698-894 MHz
Dual Broadband Antennas
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz
Triple Broadband Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

6
14
20
24
31
68
72
79
85
86
90
91
95
98
100
102

108
138
170
185
190

203
206
208
216
218
220
223
259
265
267

274
305
343
351
361

368

Table of Contents

POWERWAVE

Table of Contents

Page
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz
Single and Dual Band Antennas
Single Band Antennas
Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz
Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz
Urban Vertical Polarized Antennas, 824-896/870-960 MHz
Dual Band Antennas
Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz
iRET
Low Broadband Cross Polarized iRET Antennas, 698-894MHz
Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz
Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz
Dual High Broadband Cross Polarized iRET Antennas, 2300-2700 MHz
iDiplexer Antennas
Multi Broadband Cross Polarized Antennas
Remote Electrical Tilt (RET)
Single Band RET
Dual Band RET
Triple Band RET
iRET Antenna Controller Module 8510
Master Control Unit
Current Injector Layer One Converter
RET System Cables
Indoor Antennas
Dual Band Indoor Antennas
Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz
Multiband Indoor Antennas
Vertical Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz
Clean Site Solutions
Mounting Solutions
Antenna FAQ
Network Management
Part Number Index

375

384
386
406
414

438
452
456
463
483
489
493
496
502
508
517
520
523
526
533
538

543

545
549
551
558
559
561

Power wave

Base Station Products

Base Station Products

Power Amplifier Solutions

A unique combination of capabilities sets Powerwave apart


from other providers when it comes to rapidly delivering
cost-effective base station solutions to operators & OEMs.
From straightforward crossband and same band combiners
to active multi-function assemblies such as tunable
combiners, active same band combiners and integrated
amplifier assemblies, Powerwave has you covered.

TMA Products

Comprehensive RF/Digital Competencies


Our engineering staff has expertise across all facets
of RF and digital signal processing. Using all of these
technological competencies, we are able to create highly
integrated performance and cost-effective base station
solutions. Higher integration means fewer parts, optimum
manufacturing efficiency and better value.

End-to-End System Provider


Because Powerwave is a proven provider for all categories
of wireless infrastructure solutions - from antenna products
to base station products to coverage products - you can rely
on us as a value-added single-source to consolidate and
streamline your supply chain.

Filters

Base Station Products

POWERWAVE

Base Station Products

Power Amplifier Solutions

Page

MCPA Modules

Single MCPA Outdoor Booster Systems

14

Dual MCPA Outdoor Booster Systems

20

Triple MCPA Outdoor Booster Systems

24

TMA Products
Tower Mounted Amplifiers

31

Power Distribution Units

68

Current Injectors

72

Filters
Diplexer/Crossband Combiners

79

Duplexers

85

Same Band Combiners T1

86

Triplexer/Crossband Combiners

90

Interference Filters

91

Power wave

Power Amplifier Solutions

Powerwave offers one of the industrys largest and most


diverse line of power amplifier systems for cellular, EGSM,
DCS, PCS, AWS and UMTS wireless networks, with more
than 350,000 MCPAs and SCPAs deployed worldwide.
One key reason for this success is that we are able to
rapidly roll out new solutions by leveraging the modular
architecture of existing systems. Building upon field-proven
products and technologies, our RF engineers are able to
shorten design time and deliver systems with industryleading efficiency, packaging density and reliability to
help service providers reduce both operating and capital
expenses within their network while increasing revenues.

MCPA Modules
Single MCPA Outdoor
Booster Systems
Dual MCPA Outdoor
Booster Systems
Triple MCPA Outdoor
Booster Systems

Base Station Products

MCPA Modules

POWERWAVE

Power Amplifier Solutions


MCPA Modules

Title

Range (MHz)

Air Interface

Part Number

Page

180W Multi-Carrier
Power Amplifier

850

GSM/EDGE/CDMA2000/
WCDMA

G3l-850-180

160W Multi-Carrier
Power Amplifier

850

GSM/EDGE/CDMA2000/
WCDMA

G3L-850-160

135W Multi-Carrier
Power Amplifier

900

GSM/EDGE/CDMA2000/
WCDMA

G3L-929-135

10

120W Multi-Carrier
Power Amplifier

1800

GSM/EDGE/CDMA2000/
WCDMA

G3L-1829-120

11

170W Multi-Carrier
Power Amplifier

1900

GSM/EDGE/CDMA2000/
WCDMA

G3L-1929-160

12

140W Multi-carrier
Power Amplifier

2100

GSM/EDGE/CDMA2000/
WCDMA

G3L-2129-140

13

G3L-850-180

Multi-Carrier Power Amplifiers

Introduction:
The G3L-850-180 is a high performance Multi-Carrier Power Amplifier
(MCPA) intended for Cellular applications. This PA utilizes
Powerwaves feed-forward linearization technique to provide
maximum operating BW and compatibility with 2G, 3G and 4G air
interface standards. Latest generation devices and biasing schemes
provide industry leading efficiency, RF output power and spectrum
performance allowing significant savings in OPEX and CAPEX.

Features:

Automatic Power Control (APC) @ 210W

Phase matched for parallel combining

Internal monitoring and alarming for VSWR, linearization, voltage,


overpower

Backward compatible with legacy MCPA systems

Common form-factor with PCS and AWS models

ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)

869 ~ 894

Bandwidth (MHz)

25

Instantaneous Bandwidth (MHz)

25

Air Interface

GSM, EDGE, CDMA2000, WCDMA, LTE

Efficiency

23%

RF Output Power

180W

Intermodulation Distortion

FCC & Air Interface Compliant

Harmonics

-13dBm/1MHz

Nominal RF Gain (dB)

63dB

Gain Flatness

+/-0.5dB

Gain Variation with Temperature

+/-0.5dB

Input Return Loss

14dB

Output Return Loss

16dB

DC Input Voltage Range (DC)

+22V ~ + 30V

DC Input Current

29A @ +27V, 180W RF Ouput

Alarms and Protections

VSWR, Temp, Overpower, PSU, Linearization

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Oct 5 2011 5:41PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

G3L-850-180

Multi-Carrier Power Amplifiers

MECHANICAL SPECIFICATIONS
Dimension HxWxD, ft. (mm)

12 x 4 x 16 (354.6 x 95.6 x 450)

Weight, lbs (kg)

24.3 (11.0)

Connectors DC Terminal Post

PDM (D-Sub 17/21 Blind Mate)

Connectors RF Input

PKZ (D-Sub 17/21 Blind Mate)

Connectors RF Output

PKZ (D-Sub 17/21 Blind Mate)

Connectors Alarm Output

D-Sub 17/21 Blind Mate

Serial Interface (GUI)

RJ-11 Jack

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20oC ~ +50oC

Storage Temperature Range

-40oC ~ +70oC

Operating Humidity

5% ~ 80% RH

Storage Humidity

5% ~ 95% RH

Example Performance @ 180W RF Output

Single Carrier HSPA+

Multi-Carrier HSPA+

PCDE Compliant
Peak EVM Compliant

PCDE Compliant
Peak EVM Compliant

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Oct 5 2011 5:41PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-850-160

160W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS*
Band (MHz)

850

Frequency Range (MHz)

869-894

Instantaneous Bandwidth

25

Air Interface

GSM/EDGE/CDMA2000/WCDMA

Efficiency

18%

RF Output Power

160W (Typical)

Intermodulation Distortion

-65 dBc

Harmonics

Better than -13 dBm/ 1MHz

Nominal RF Gain (dB)

63 dB 0.5 dB

Gain Flatness

0.5 dB

Gain Variation with Temperature

+/-0.5 dB

Input Return Loss

16 dB (Max)

Output Return Loss

16 dB (Max)

DC Input Voltage Range

26 to 28 Vdc (+21 to 30 Vdc Operational)

DC Input Current

Typical: 30.5A (GSM), 29 (CDMA)

Alarms and Protections

Input over power, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft)

355 x 99 x 450 (12x4x16)

Weight(lbs)

24.3

Connectors DC Terminal Post

N/A

Connectors RF Input

Sub-miniature Combo D connector for RF & Digital interfaces

Connectors RF Output

N/A

Connectors Alarm Output

N/A

ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range

-33 C to 50 C

Storage Temperature Range

-40 to 70 C

Operating Humidity

0% to 80% (non condensing)

Storage Humidity

0% to 95% (non condensing)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 5 2010 4:38PM

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-929-135

135W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS*
Band (MHz)

900

Frequency Range (MHz)

925-960 MHz

Instantaneous Bandwidth

25 MHz

Air Interface

GSM/EDGE/CDMA2000/WCDMA

Efficiency

19%

RF Output Power

135W (Typical)

Intermodulation Distortion

-65 dBc (Typical)

Harmonics

Better than -13 dBm/1 MHz

Nominal RF Gain (dB)

63 dB 0.5 dB

Gain Flatness

0.5 dB

Gain Variation with Temperature

0.5 dB

Input Return Loss

14 dB (Max)

Output Return Loss

16 dB (Max)

DC Input Voltage Range

26 to 28 Vdc (21 to 30 Vdc Operational)

DC Input Current

26A (nominal at rated power)

Alarms and Protections

Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft)

355 x 99 x 450 (12x4x16)

Weight(lbs)

20

Connectors DC Terminal Post

21W4 Combo-D w/size 8 contact

Connectors RF Input

21W4 Combo-D w/PkZ contact

Connectors RF Output

21W4 Combo-D w/PkZ contact

Connectors Alarm Output

21W4 combo-D

ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range

-33 C to 50 C

Storage Temperature Range

-40 C to 70 C

Operating Humidity

5% to 95% non-condensing

Storage Humidity

5% ro 95% non-condensing

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 6 2010 5:44PM

10

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-1829-120

120W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS*
Band (MHz)

1800

Frequency Range (MHz)

1805-1880

Instantaneous Bandwidth

35

Air Interface

GSM/EDGE/CDMA2000/WCDMA

Efficiency

13.4% (GSM)

RF Output Power

Typical: 120W

Intermodulation Distortion

-65 dBc (Typical)

Harmonics

Better than -13 dBm/ 1MHz

Nominal RF Gain (dB)

63 dB +/- 0.5

Gain Flatness

+/-0.3 dB

Gain Variation with Temperature

+/-0.5 dB

Input Return Loss

17 dB (Max)

Output Return Loss

18 dB (Max)

DC Input Voltage Range

26 to 30 /Vdc (22 to 30 Vdc Operational)

DC Input Current

Typical: 33A (GSM), 31A (CDMA)

Alarms and Protections

Input over drive, VSWR, DC failure, High temperature, Loop failure, APC

MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft)

355 x 99 x 450 (12x4x16)

Weight(lbs)

23

Connectors DC Terminal Post

21W4 Combo-D w/size 8 contact

Connectors RF Input

21W4 Combo-D w/PkZ contact

Connectors RF Output

21W4 Combo-D w/PkZ contact

Connectors Alarm Output

21W4 Combo-D

ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range

-33 C to 50 C

Storage Temperature Range

-40 to 70 C

Operating Humidity

5% to 95% (non condensing)

Storage Humidity

5% to 95% (non condensing)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 5 2010 4:39PM

11

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-1929-160

170W Multi-Carrier Power Amplifier

ELECTRICAL SPECIFICATIONS*
Band (MHz)

PCS

Frequency Range (MHz)

1930-1995

Instantaneous Bandwidth

Up to 65

Air Interface

GSM/EDGE/CDMA2000/WCDMA

Efficiency

18.5%

RF Output Power

170 Watts (Typical)

Intermodulation Distortion

-65 dBc

Harmonics

Better than -13 dBm/ 1MHz

Nominal RF Gain (dB)

63 dB 0.5 dB

Gain Flatness

0.5 dB

Gain Variation with Temperature

+/-0.5 dB

Input Return Loss

16 dB (Max)

Output Return Loss

16 dB (Max)

DC Input Voltage Range

26 to 28 Vdc (+21 to 30 Vdc Operational)

DC Input Current

34A@170W, 33A@160W

Alarms and Protections

Input over power, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft)

355 x 99 x 450 (12x4x16)

Weight(lbs)

26.4

Connectors DC Terminal Post

N/A

Connectors RF Input

Sub-miniature Combo D connector for RF & Digital interfaces

Connectors RF Output

N/A

Connectors Alarm Output

N/A

ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range

-33 C to 50 C

Storage Temperature Range

-40 to 70 C

Operating Humidity

0% to 80% (non condensing)

Storage Humidity

0% to 95% (non condensing)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 5 2010 4:42PM

12

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Multi-Carrier Power Amplifiers

G3L-2129-140

140W Multi-carrier Power Amplifier

ELECTRICAL SPECIFICATIONS*
Band (MHz)

2100

Frequency Range (MHz)

2110-2170

Instantaneous Bandwidth

60 MHz

Air Interface

CDMA2000/WCDMA/LTE

Efficiency

> 15% (45 MHz IBW), >14% (60 MHz IBW)

RF Output Power

140W

Intermodulation Distortion

Spurious Emissions - 3GPP TS25.141 Air interface compliant.

Harmonics

-13 dBm (Max.) 1 MHz Bandwidth; -50 dBc (Max.)

Nominal RF Gain (dB)

63 dB

Gain Flatness

+/-0.5 dB

Gain Variation with Temperature

+/-0.5 dB

Input Return Loss

14

Output Return Loss

16

DC Input Voltage Range

+26 to +28 Vdc Nominal (+21 to +30 Operational)

DC Input Current

34.5A (Nominal, at 27V, 140W output)

Alarms and Protections

Input over drive, VSWR, DC failure, High temperature, Loop failure

MECHANICAL SPECIFICATIONS*
Dimension HxWxD, mm(ft)

355 x 99 x 500 (incl handles) (13.96 H X 3.9 W X 19.7 D)

Weight(lbs)

28.5

Connectors DC Terminal Post

21W4 Combo-D w/size 8 contact

Connectors RF Input

21W4 Combo-D w/PkZ contact

Connectors RF Output

21W4 Combo-D w/PkZ contact

Connectors Alarm Output

21W4 Combo-D

ENVIRONMENTAL SPECIFICATIONS*
Operating Temperature Range

-20 C to +50 C

Storage Temperature Range

-40 to +85 C

Operating Humidity

5% to 90% (non condensing)

Storage Humidity

5% to 90% (non condensing)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 5 2010 4:44PM

13

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Base Station Products

POWERWAVE

Single MCPA Outdoor Booster Systems

Power Amplifier Solutions


Single MCPA Outdoor Booster Systems

Title

Range (MHz)

Air Interface

Part Number

Page

OS-1 Outdoor System

800

GSM/EDGE/CDMA2000/
WCDMA

OS-0851-P0-XXX

15

OS-1 Outdoor System

900

GSM/EDGE/CDMA2000/
WCDMA

OS-0951-P0-XXX

16

OS-1 Outdoor System

1800

GSM/EDGE/CDMA2000/
WCDMA

OS-1851-H0-XXX

17

OS-1 Outdoor System

1900

GSM/EDGE/CDMA2000/
WCDMA

OS-1951-E0-XXX

18

OS-1 Outdoor System

2100

GSM/EDGE/CDMA2000/
WCDMA

OS-2151-E0-XXX

19

14

POWERWAVE

Outdoor Booster Systems

OS-0851-P0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA/WCDMA

Frequency (MHz) Down Link

869-894

Frequency (MHz) Up Link

824-849

System Output Power

120**

IMD Specification

-65* dBc

Instantaneous Bandwidth

25

Tx Gain Range (dB)

0 to +20

Rx Path Insertion Loss

2.5* (-000 version)

Supply Voltage

180-264 VAC or +27VDC

Noise Figure (dB)

2.5 @ max gain, 3.0 @ min gain* (-003 version)

Rx Gain Range

0 to +13.0 variable (-003 version)

Input Intercept Point IIP3 (dBm)

+12 min (-003 Version)

Tx Rejection In Rx Band (dB)

100 min

VSWR Alarm Threshold (dB)

7.0 (+/- 2 dB) (-003 version)

Return Loss, All Ports (dB)

15 min

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

228 X 660 X 660 (9x 22 x 22)

Weight(lbs)

102

RF Connectors

7/16 DIN female X 6

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

20kA EIC 61000-4-5, 8/20us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

930-00018-009 (optional)

3 KW Rectifier

160W MCPA Module

OS-0851-P0-000

Enclosure -TMA model

OS-0851-P0-003

Enclosure - LNA model with VSWR


monitor

MCPA Modules:
G3L-850-160

Choose one of the following


Enclosures:

* Typical Performance. ** Typical, with G3L-850-160 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Aug 26 2010 12:04PM

15

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-0951-P0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/WCDMA

Frequency (MHz) Down Link

925-960

Frequency (MHz) Up Link

880-915

System Output Power

105 Watts**

IMD Specification

Spurious Emissions - 3GPP TS45.005 & TS25.141 Air Interface Compliant

Instantaneous Bandwidth

35

Tx Gain Range (dB)

0 to +20.0 variable

Rx Path Insertion Loss

2 dB* (-100 model)

Supply Voltage

94-264 VAC (Single Phase) or +27VDC

Noise Figure (dB)

2.5* @ max. gain, 3.5* @ min. gain (-103 version)

Rx Gain Range

0 to +14.0 variable (-100 model)

Input Intercept Point IIP3 (dBm)

> 0 dBm

Tx Rejection In Rx Band (dB)

100 min.

VSWR Alarm Threshold (dB)

0-10 dB output RL

Return Loss, All Ports (dB)

14 min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

620 X 284 X 716 (24.4x 11.18 x 28.18)

Weight(lbs)

50 Kg (110 lbs)

RF Connectors

7/16 DIN Female X 4

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-30 to +50

Ingress Protection Class

IP54

Lightning Protection

40kA per line, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

OS-0951-P0-104

1 sector, with LNA, includes rectifier and


modem

OS-0951-P0-103

1 sector, with LNA, includes rectifier

135W MCPA Module

Choose one enclosure:

Amplifier Module:
G3L-929-135

* Typical Performance. ** Typical, with G3L-929-135 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Feb 11 2011 10:24AM

16

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1851-H0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA/WCDMA

Frequency (MHz) Down Link

1805-1880

Frequency (MHz) Up Link

1710-1785

System Output Power

90** Watts

IMD Specification

-65* dBc

Instantaneous Bandwidth

45

Tx Gain Range (dB)

0 to +14

Rx Path Insertion Loss

2dB* (-000 version)

Supply Voltage

94-264 VAC (Single Phase, 47-63Hz) or +27VDC

Noise Figure (dB)

2.3* @ max. Gain, 1.89* @ min. Gain

Rx Gain Range

0 to +13.0 variable (-003 version)

Input Intercept Point IIP3 (dBm)

+12 min.

Tx Rejection In Rx Band (dB)

100 min.

VSWR Alarm Threshold (dB)


Return Loss, All Ports (dB)

15 min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

610 X 284 X 716 (24x 11 x 28)

Weight(lbs)

102

RF Connectors

7/16 DIN Female X 6

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

G3L-1829-120

120W MCPA module

1
1

Choose one of:


OS-1851-H0-000

Enclosure - TMA model - DC transparency

OS-1851-H0-003

Enclosure - LNA model - includes VSWR


monitor, lightning arrestors

* Typical Performance. ** Typical, with G3L-1829-120 MCPA Module Inserted.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Jun 10 2010 2:32PM

17

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1951-E0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM, EDGE,CDMA,WCDMA

Frequency (MHz) Down Link

1930-1990

Frequency (MHz) Up Link

1850-1910

System Output Power

125** Watts

IMD Specification

-65 dBc

Instantaneous Bandwidth

65

Tx Gain Range (dB)

0 to +20 variable

Rx Path Insertion Loss

2 dB (-100 series)

Supply Voltage

94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC

Noise Figure (dB)

2.5 dB max (all models except -100)

Rx Gain Range

0 to +14 dB (all models except -100)

Input Intercept Point IIP3 (dBm)

> 0 dBm

Tx Rejection In Rx Band (dB)

100 dB min

VSWR Alarm Threshold (dB)

0-10 dB output RL

Return Loss, All Ports (dB)

14 dB min

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

620 X 284 X 716 (24.4x 11.18 x 28.18)

Weight(lbs)

110 (50 Kg)

RF Connectors

7/16 DIN Female X 6

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-30 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

40 KA per line, 8/20 us WF

ORDERING INFORMATION
Model Number

Description

Quantity

1 sector, with LNA, includes rectifier

160W 1900 MHz MCPA

Enclosures (Select one):


OS-1951-E0-102
MCPA Module
G3L-1929-160
Alternatively, select a Kit:
INST-OS-1951-103

Kit includes:
G3L-1929-160 amplifier module

OS-1951-E0-102 enclosure

* Typical Performance** Typical, with G3L-1929-160 inserted, 45 MHz IBWAll specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Jul 20 2010 3:04PM

18

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-2151-E0-XXX

OS-1 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM,EDGE,CDMA,WCDMA

Frequency (MHz) Down Link

2110-2155 (AWS, -4XX series), 2110-2170 (UMTS, -1XX series)

Frequency (MHz) Up Link

1710-1755 (AWS, -4XX series), 1920-1980 (UMTS, -1XX series)

System Output Power

100W**

IMD Specification

Spurious Emissions - 3GPP TS25.141 Air interface compliant.

Instantaneous Bandwidth

45 (AWS, -4XX series) 60 (UMTS,-1XX series)

Tx Gain Range (dB)

0 to +20 variable

Rx Path Insertion Loss

2 dB (-100,-400 models)

Supply Voltage

94-264 VAC (Single Phase, 47-63 Hz), or +27 VDC

Noise Figure (dB)

2.5 dB max (-101,-401 models)

Rx Gain Range

0 to +14 dB adjustable (-101,-401 models)

Input Intercept Point IIP3 (dBm)

>0 dBm

Tx Rejection In Rx Band (dB)

100dB min.

VSWR Alarm Threshold (dB)

0-10 dB output RL (selectable)

Return Loss, All Ports (dB)

14 dB min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

620 X 284 X 716 (24.4x 11.18 x 28.18)

Weight(lbs)

110 (50 Kg)

RF Connectors

7/16 DIN Female X 4

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-30 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

40kA per line, 8/20 us WF

ORDERING INFORMATION
Model Number

Description

Quantity

OS-2151-E0-101

LNA model - UMTS (Band Class 1)


w/rectifier

OS-2151-E0-104

LNA model - UMTS (Band Class 1) w/rectifier


and modem

OS-2151-E0-401

LNA model - AWS (Band Class 4) w/rectifier

OS-2151-E0-404

LNA model - AWS (Band Class 4) w/rectifier


and modem

140W MCPA module

Enclosures (select one)

MCPA Module:
G3L-2129-140

Updated: Jul 20 2010 3:26PM

19

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Base Station Products

POWERWAVE

Dual MCPA Outdoor Booster Systems

Power Amplifier Solutions


Dual MCPA Outdoor Booster Systems

Title

Range (MHz)

Air Interface

Part Number

Page

OS-2 Outdoor System

900

GSM/EDGE/CDMA2000/
WCDMA

OS-0921-V0-XXX

21

OS-2 Outdoor System

1800

GSM/EDGE/CDMA2000/
WCDMA

OS-1821-H0-XXX

22

OS-2 Outdoor System

1900

GSM/EDGE/CDMA2000/
WCDMA

OS-1921-H0-XXX

23

20

POWERWAVE

Outdoor Booster Systems

OS-0921-V0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

EGSM/EDGE

Frequency (MHz) Down Link

925-960

Frequency (MHz) Up Link

880-915

System Output Power

180** Watts

IMD Specification

-65* dBc

Instantaneous Bandwidth

25

Tx Gain Range (dB)

1 MCPA Module 0 to 17.5, 2 MCPA Module 0 to 20.5

Rx Path Insertion Loss

2dB*(-000 variant), 0.5dB*dB (bypass mode)

Supply Voltage

180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB)

2.5* @ max. Gain, 3.5* @ min. Gain (-001 and -003 variants)

Rx Gain Range

0 to +11.0 variable (-001 and -003 variants)

Input Intercept Point IIP3 (dBm)

+12 min.

Tx Rejection In Rx Band (dB)

90 min.

VSWR Alarm Threshold (dB)

9.5 (+/-2dB) (-003 variant)

Return Loss, All Ports (dB)

14 min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

407 x 865 x 840 (14x 210x 29)

Weight(lbs)

151-183

RF Connectors

7/16 DIN Female X 4

Number of MCPAs per Sector

1 or 2

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 to +50

Ingress Protection Class

IP54

Lightning Protection

20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

G3L-929-135

135W MCPA module

1-2

1001308

Rectifier

2-3

OS-0921-V0-010

Enclosure - TMA model - 12V supply


to TMA

OS-0921-V0-011

Enclosure - LNA model

OS-0921-V0-013

Enclosure - LNA model with VSWR


monitor

Choose one of the following


Enclosures:

Updated: Jun 10 2010 2:33PM

21

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1821-H0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE

Frequency (MHz) Down Link

1805-1880

Frequency (MHz) Up Link

1710-1785

System Output Power

160** Watts

IMD Specification

-65* dBc

Instantaneous Bandwidth

35

Tx Gain Range (dB)

1 MCPA Module 0 to +12, 2 MCPA Module 0 to +15

Rx Path Insertion Loss

2.5dB*, 0.5dB* (bypass)

Supply Voltage

180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB)

2.5* @ max. Gain, 3.5* @ min. Gain (-001 version)

Rx Gain Range

0 to +12.0 variable (-001 version)

Input Intercept Point IIP3 (dBm)

+12dBm min.

Tx Rejection In Rx Band (dB)

100 min.

VSWR Alarm Threshold (dB)

N/A

Return Loss, All Ports (dB)

14 min

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

407 x 865 x 840 (14x 210x 29)

Weight(lbs)

151-183

RF Connectors

7/16 DIN Female X 4

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

G3L-1829-120

120W MCPA Module

1-2

1001308

AC Rectifier

2-3

OS-1821-H0-004

TMA Model - 12VDC supply to


TMA

OS-1821-H0-005

LNA Model

Choose one of the following


Enclosures:

* Typical ** Typical, with two G3L-1829-120 modules installed. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Jun 10 2010 2:32PM

22

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1921-H0-XXX

OS-2 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA/WCDMA

Frequency (MHz) Down Link

1930-1990

Frequency (MHz) Up Link

1850-1910

System Output Power

160** Watts

IMD Specification

-65* dBc

Instantaneous Bandwidth

45/60

Tx Gain Range (dB)

1 MCPA Module 0 to +12, 2 MCPA Modules 0 to +15

Rx Path Insertion Loss

2.5*

Supply Voltage

180-264 VAC, 47-63 Hz Single Phase, or +27VDC

Noise Figure (dB)

N/A

Rx Gain Range

N/A

Input Intercept Point IIP3 (dBm)

N/A

Tx Rejection In Rx Band (dB)

100 dB min

VSWR Alarm Threshold (dB)

N/A

Return Loss, All Ports (dB)

14dB min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

407 x 863 x 838 (16x 34x 33)

Weight(lbs)

151-183

RF Connectors

7/16 DIN Female X 8

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP54

Lightning Protection

20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

930-00018-009

3 KW rectifier

1-2

OS-1921-H0-000

Enclosure - TMA model - DC transparency or


TMA bias Function

(configurable)
Compatible with MCPA
Module:
G3L-1929-120

120W MCPA module

1-2

* Typical ** Typical, output power at antenna port with 2 G3L-1929-120 modules installed, 45 MHz IBW. All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Jun 10 2010 2:33PM

23

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Base Station Products

POWERWAVE

Triple MCPA Outdoor Booster Systems

Power Amplifier Solutions


Triple MCPA Outdoor Booster Systems

Title

Range (MHz)

OS-3 3 Sector Outdoor


System

900

OS-3 3 Sector Outdoor


System

Air Interface

Part Number

Page

GSM/EDGE/CDMA2000/
WCDMA

OS-0933-E0-XXX

25

1800

GSM/EDGE/CDMA2000/
WCDMA

OS-1833-E0-XXX

26

OS-3 3 Sector Outdoor


System

1900

GSM/EDGE/CDMA2000/
WCDMA

OS-1933-E0-XXX

27

OS-3 Outdoor System

1900

GSM/EDGE/CDMA2000/
WCDMA

OS-1991-H0-XXX

28

OS-3 3 Sector Outdoor


System

2100

GSM/EDGE/CDMA2000/
WCDMA

OS-2133-E0-XXX

29

24

POWERWAVE

Outdoor Booster Systems

OS-0933-E0-XXX

OS-3 3 Sector Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA/WCDMA

Frequency (MHz) Down Link

925-960

Frequency (MHz) Up Link

880-915

System Output Power

110 W*

IMD Specification

-63 dBc*

Instantaneous Bandwidth

35 (with G3L-929-135 module)

Tx Gain Range (dB)

0-17 Variable

Rx Path Insertion Loss

0.5dB* (RF Bypass Mode)

Supply Voltage

180-264 VAC, -48VDC (-103 model)

Noise Figure (dB)

2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)

Rx Gain Range

0-12 dB

Input Intercept Point IIP3 (dBm)

0.0

Tx Rejection In Rx Band (dB)

100

VSWR Alarm Threshold (dB)

Adjustable

Return Loss, All Ports (dB)

14

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

16 W x 40 H x 38 D

Weight(lbs)

385 (175 kg)

RF Connectors

7/16 DIN-F, N-F

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP55

Lightning Protection

20kA EIC 61000-4-5, 8/20 uS Waveform

ORDERING INFORMATION
Model Number

Description

Quantity

OS-0933-E0-003

OS-3, 900 MHz, Trident 3 Sector, 3I/3O


Includes:

G3L-929-135 modules

RF Conditioning Units (RFCU)

220VAC Rectifiers

OS-0933-E0-103

-48VDC version of OS-0933-E0-003


Includes four -48VDC rectifiers instead of
220VAC rectifiers

OS-0933-E0-001

INST-0933-E0-001

OS-3, 900 MHz, Trident 1 Sector, 3I/3O


Includes:

G3L-929-135 module

RF Conditioning Unit (RFCU)

220VAC Rectifiers

1 Sector Upgrade Kit


Includes:

Updated: Sep 6 2011 10:20AM

G3L-929-135 module

RF Conditioning Unit (RFCU)

220VAC Rectifier

25

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1833-E0-XXX

OS-3 3 Sector Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA/WCDMA

Frequency (MHz) Down Link

1805-1880

Frequency (MHz) Up Link

1710-1785

System Output Power

100 W*

IMD Specification

-63 dBc*

Instantaneous Bandwidth

75 (with G3L-1829-120 module)

Tx Gain Range (dB)

0-17 Variable

Rx Path Insertion Loss

0.5dB* (RF Bypass Mode)

Supply Voltage

180-264 VAC, -48VDC (-103 model)

Noise Figure (dB)

2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)

Rx Gain Range

0-12 dB

Input Intercept Point IIP3 (dBm)

0.0

Tx Rejection In Rx Band (dB)

100

VSWR Alarm Threshold (dB)

Adjustable

Return Loss, All Ports (dB)

14

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

16 W x 40 H x 38 D

Weight(lbs)

385 (175 kg)

RF Connectors

7/16 DIN-F, N-F

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP55

Lightning Protection

20kA EIC 61000-4-5, 8/20 uS Waveform

ORDERING INFORMATION
Model Number

Description

Quantity

OS-1833-E0-003

OS-3, 1800 MHz, Trident 3 Sector, 3I/3O


Includes:

G3L-1829-120 modules

RF Conditioning Units (RFCU)

220VAC Rectifiers

OS-1833-E0-103

-48VDC version of OS-1833-E0-003


Includes four -48VDC rectifiers instead of
220VAC rectifiers

OS-1833-E0-001

INST-1833-E0-001

OS-3, 1800 MHz, Trident 1 Sector, 3I/3O


Includes:

G3L-1829-120 module

RF Conditioning Unit (RFCU)

220VAC Rectifiers

1 Sector Upgrade Kit


Includes:

Updated: Sep 16 2011 1:03PM

G3L-1829-120 module

RF Conditioning Unit (RFCU)

220VAC Rectifier

26

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1933-E0-XXX

OS-3 3 Sector Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA2000/WCDMA

Frequency (MHz) Down Link

1930-1995

Frequency (MHz) Up Link

1850-1915

System Output Power

150W*

IMD Specification

-65 dBc*

Instantaneous Bandwidth

65 (with G3L-1929-160 module)

Tx Gain Range (dB)

0-17 Variable

Rx Path Insertion Loss

0.5dB* (RF Bypass Mode)

Supply Voltage

180-264 VAC, -48VDC (-103 model)

Noise Figure (dB)

2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)*

Rx Gain Range

0-12 dB

Input Intercept Point IIP3 (dBm)

0.0

Tx Rejection In Rx Band (dB)

100

VSWR Alarm Threshold (dB)

Adjustable

Return Loss, All Ports (dB)

14

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

16 W x 40 H x 38 D

Weight(lbs)

385 (175 kg)

RF Connectors

7/16 DIN-F, N-F

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP55

Lightning Protection

20kA EIC 61000-4-5, 8/20 uS Waveform

ORDERING INFORMATION
Model Number

Description

Quantity

OS-1933-E0-003

OS-3, 1900 MHz, Trident 3 Sector, 3I/3O


Includes:

G3L-1929-160 modules

RF Conditioning Units (RFCU)

220VAC Rectifiers

OS-1933-E0-103

-48VDC version of OS-1933-E0-003


Includes four -48VDC rectifiers instead of
220VAC rectifiers

OS-1933-E0-001

INST-1933-E0-001

OS-3, 1900 MHz, Trident 1 Sector, 3I/3O


Includes:

G3L-1929-160 module

RF Conditioning Unit (RFCU)

220VAC Rectifiers

1 Sector Upgrade Kit


Includes:

Updated: Jan 25 2011 4:27PM

G3L-1929-160 module

RF Conditioning Unit (RFCU)

220VAC Rectifier

27

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-1991-H0-XXX

OS-3 Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA2000/WCDMA

Frequency (MHz) Down Link

1930-1995

Frequency (MHz) Up Link

1850-1915

System Output Power

335** Watts

IMD Specification

-65* dBc

Instantaneous Bandwidth

45/65

Tx Gain Range (dB)

duplex/simplex: 3 MCPAs: 0.0 to +16.2/17.0, 2 MCPAs: 0 to 14.4/15.2, 1 MCPA: 0 to +11.4/12.2

Rx Path Insertion Loss

3.0 max (-003, -103, -200 versions)

Supply Voltage

-36 to -60VDC (-103 version), 180-264VAC (-003,-004 versions),+26-28VDC (-200 version)

Noise Figure (dB)

2.5 at max Rx gain (-004 version)

Rx Gain Range

0-12 dB in 1 dB increments (-004 version only)

Input Intercept Point IIP3 (dBm)

0.0 (-004 version only)

Tx Rejection In Rx Band (dB)

100 min

VSWR Alarm Threshold (dB)

N/A

Return Loss, All Ports (dB)

14 min.

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

405 x 774 x 864 (14x 26x 210)

Weight(lbs)

255 lbs, fully populated, with 3 MCPA modules

RF Connectors

7/16 DIN Female

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP55

Lightning Protection

20kA EIC 61000-4-5, 8/20 us waveform

ORDERING INFORMATION
Model Number

Description

Quantity

G3L-1929-160

160W MCPA module

1-3

G3L-1929-120

120W MCPA module

1-3

OS-1991-H0-003

220 VAC Enclosure - TMA model

OS-1991-H0-004

220 VAC Enclosure - LNA with DC bypass


option for TMA bias

OS-1991-H0-103

-48 VDC Enclosure - TMA model

OS-1991-H0-200

+27 VDC Enclosure - TMA model

Choose one of:

Choose one of:

* Typical performance**Typical, with 3 G3L-1929-160 modules, 45 MHz IBW.All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

Updated: Dec 5 2010 4:49PM

28

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Outdoor Booster Systems

OS-2133-E0-XXX

OS-3 3 Sector Outdoor System

ELECTRICAL SPECIFICATIONS
Air Interface

GSM/EDGE/CDMA2000/WCDMA

Frequency (MHz) Down Link

2110-2170 (UMTS, -X1X series), 2110-2155 (AWS, -X4X series)

Frequency (MHz) Up Link

1920-1980 (UMTS, -X1X series), 1710-1755 (AWS, -X4X series)

System Output Power

105W**

IMD Specification

-65 dBc*

Instantaneous Bandwidth

60 (UMTS, -X1X series) 45 (AWS, -X4X series)

Tx Gain Range (dB)

0-17 Variable

Rx Path Insertion Loss

0.5dB* (RF Bypass Mode)

Supply Voltage

180-264 VAC (-0XX series), -48VDC (-1XX series)

Noise Figure (dB)

2.5 (Max @ 12dB Gain), 4.5 (Max @ 0 dB gain)

Rx Gain Range

0-12 dB

Input Intercept Point IIP3 (dBm)

0.0

Tx Rejection In Rx Band (dB)

100

VSWR Alarm Threshold (dB)

adjustable

Return Loss, All Ports (dB)

14

Impedance All Ports (Ohms)

50

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

16 W x 40 H x 38 D

Weight(lbs)

385 (175 kg)

RF Connectors

7/16 DIN-F, N-F

Number of MCPAs per Sector

Number of Sectors

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range

-20 C to +50 C

Ingress Protection Class

IP55

Lightning Protection

20kA EIC 61000-4-5, 8/20

ORDERING INFORMATION
Model Number

Description

Quantity

OS-2133-E0-013

Enclosure: 3I3O, UMTS (Band 1),220 VAC

OS-2133-E0-043

Enclosure: 3I3O, AWS (Band 4),220 VAC

OS-2133-E0-113

Enclosure: 3I3O, UMTS (Band ),-48 VDC

OS-2133-E0-143

Enclosure: 3I3O, AWS (Band 4),-48VDC

Models above include:

OS-2133-E0-041

INST-2133-E0-041

G3L-2129-140 amplifier modules

Frequency-specific RF Conditioning Units

220 VAC Rectifiers (AC enclosures only)

Enclosure: 3I3O, AWS (Band 4), 220 VAC

Incl: G3L-2129-140 amplifier module

AWS RF Conditioning Unit

220VAC Rectifiers

AWS Upgrade Kit, includes: G3L-2129-140


amplifier module

AWS RF Conditioning Unit

220 VAC Rectifier

* Typical Performance** Typical, with G3L-2130-140 MCPA Module Inserted, 45 MHz IBW

Updated: May 18 2011 12:42PM

29

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

TMA Products

Tower Mounted Amplifiers


Powerwave offers one of the most extensive tower mounted
amplifier (TMA) product portfolios, including single, twin
and dual band TMAs. Our TMA design offers a low noise
amplifier that provides superior receive system performance
and reliability, and is fully compatible with 2G, 3G and
4G(LTE) systems. Powerwave TMAs are designed for
the harshest environments to include desert and polar
climates and extreme environments such as rain forests.
Powerwave TMAs are also part of the Powerwave Clean
Site Solutions which provides multiple benefits such as
reduced installation cost, reuse of existing building permits
and reduced visual impact to base stations.

Tower Mounted
Amplifiers
Power Distribution Unit
Current Injectors

Base Station Products

POWERWAVE

Tower Mounted Amplifiers

TMA Products
Tower Mounted Amplifiers

TMA Type

Up-Link (MHz)

Down-Link (MHz)

Part Number

TMA-DD Micro Twin 2100

1920-1980

2110-2170

LGP215nn

33

TMA Twin 2600

2500-2700

2620-2690

TT26-0000112-0n1

35

TMA 800 Digital Dividend

832-862

791-821

TT8D-0000112-0n1

37

TMA Twin 800 AISG

824-849

869-894

24501, 24511

39

TMA-DD Twin 2100 15 MHz

1969.7-1984.7

2110-2170

010-11177-0214

40

TMA-DD Twin 2100 15 MHz

1920.5-1935.5

2110-2170

010-11182-02nn

41

TMA-DD Twin 2100 15 MHz

1964.9-1979.9

2110-2170

010-11183-02nn

42

TMA-DD Twin 2100 15 MHz

1950-1965

2110-2170

010-50025-0232

43

TMA Twin 900 AISG

890-915

935-960

25001, 25011

44

TMA Twin 900 AISG

880-908

925-953

25002, 25012

45

TMA Twin 900 AISG

890-915

935-960

25014, 25016

46

TMA Single 900 AISG

890-915

935-960

25101, 25111

47

TMA Single 900 AISG

890-915

935-960

25102, 25112

48

TMA Single 900 AISG

890-915

935-960

25103, 25113

49

TMA-DD EGSM

880-915

925-960

LGP192nn

50

TMA-DD 850 MHz SMR


Rejection

824-849

869-894

LGP174nn

51

TMA-DD 1900

1850-1910

1930-1990

LGP175nn

52

TMA-DD 1800 Twin AISG 2.0 1710-1785

1805-1880

LGP18510,
LGP18520

53

TMA-DD 1800 Twin AISG 2.0 1710-1785

1805-1880

LGP18520,
LGP18521

54

TMA-DD 1800 Twin AISG 2.0 1710-1785

1805-1880

LGP185nn

55

31

Page

Base Station Products

Tower Mounted Amplifiers

POWERWAVE

TMA Products
Tower Mounted Amplifiers

TMA Type

Up-Link (MHz)

Down-Link (MHz)

Part Number

TMA-DD 1900 Twin

1850-1910

1930-1990

LGP186nn

56

TMA-DD 1900 Twin

1850-1910

1930-1990

LGP18611

57

TMA Dual Band AWS


with 700 Bypass

1710-1770 with 698-746


bypass

2110-2170 with 698746 bypass

TSAW-07BP111-001

58

TMA Twin Dual Band 1710-1770 with 698-746


AWS with 700 Bypass bypass

2110-2170 with 698746 bypass

TTAW-07BP111-001

59

TMA Micro Twin AWS

1710-1755

2110-2155

TTAW-0000112-001

60

TMA Micro Twin AWS

1710-1770

2110-2170

TTAW-60BW111-001

61

TMA Dual Band


700/AWS

698-716 MHz and 17101770 MHz

728-746 and 21102170

TS07-AWDB111-001

62

TMA Dual Band


700/AWS

698-716 MHz and 17101770 MHz

728-746 and 21102170

TS07-AWDB112-001

63

TMA Twin 850/1900


Dual Band

824-849 /1850-1910

869-894 /1930-1990

TT08-19DB111-001

64

TMA Twin 1900 with


850 Bypass

1850-1910 with 824-894


bypass

1930-1990 with 824894 bypass

TT19-08BP111-001

65

ACTIVE UGC 900

890-915

935-960

TU09-000001n-001

66

ACTIVE UGC 900

890-915

935-960

TU9E-28BW01n-00n

67

32

Page

LGP215nn

Tower Mounted Amplifiers

Micro Twin Tower Mounted Amplifier Dual Duplex 2100 MHz Full Band

Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 2100 TMA offers state of the art performance,
size and weight enclosure in Twin configuration, two TMAs in one housing
with market leading reliability.

Features:

AISG 1.1 and 2.0 compatible

Current Alarm Mode (When no AISG is connected)

Twin configuration, 2 TMAs in one and same housing

Market leading reliability

Low Noise Figure

Low TX insertion loss

Easy to install wall mount bracket and hose clams for pole mount
included
No Maintenance

ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz)

1920-1980

Rejection

>85 dB (2110-2170 MHz)

Gain (dB)

12

Return Loss

>18 dB

Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

Bypass Loss (dB)

<2.0 dB, Typical

Max Input Power (dBm)

+14

Downlink
Frequency Range (MHz)

2110-2170

Return Loss

>20 dB

Insertion Loss (dB)

0.3 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carriers, In receive band, <-125 dBm, referred to Antenna port

Power Handling, RMS

>49 dBm (4x43 dBm)

Power Supply & Alarm


Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17


AISG Compatible. In case of no AISG command received current alarm mode. LGP21509, 19: 170-190 mA;
LGP21508, 18: current alarm compatible with PDU LGP121nn

Alarm Functionality
Power Consumption

@12 VDC, 1.5 W per LNA

AISG Compatibility

LGP21508, 09 AISG 1.1 (field upgradable to AISG 2.0); LGP21518, 19 AISG 2.0

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 2 2011 1:31PM
D031-08222 Rev D

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

33

LGP215nn

Tower Mounted Amplifiers


BLOCK DIAGRAM

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch)

154 x 192 x 50 (6x8x2)

Weight (lbs)

2.5kg (5.5 lbs)

Color

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transport

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65 and IP68

MECHANICAL OUTLINE

APPROVALS AND TESTS


Safety

EN 60 950

EMC

ETSI 125 113

INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214. Seal the 7/16 connectors according to the
in the package enclosed instruction 100-11279-001.

ACCESSORIES
LGP21301, LGP21302

Outdoor Current Injector (01 female , 02 male ANT conn.)

D100314, D100312

LGP23301, LGP23303

Outdoor Current Injector (01 female , 02 male ANT conn.)

7060.00, 7060.05

LGP12101, 02, 03, 04

Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19)

7060.10, 7060.15

D100301, LG705

Indoor CIN cable (01: 7m, 05: 3m)

D105104, D105103

Outdoor CIN Cable (04: 10.3m, 03: 3m)

D100315, D100313

PDU Alarm Cable (15: 7m, 13: 3m)

7070.10, 7070.30, 7070.50

PDU Power Cable (14: 7m, 12: 3m)


CILOC (ANT)
CILOC (BTS)
MCU (10: AC, 30: 24V, 50: -48V)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 2 2011 1:31PM
D031-08222 Rev D

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

34

TT26-0000112-0n1

Tower Mounted Amplifiers

TMA Twin 2600 12 dB AISG 2.0

Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 2600 TMA offers state of the art performance,
size and weight enclosure in Twin configuration, two TMAs in one housing
with market leading reliability.

Features:

AISG compatible

Current Alarm Mode (When no AISG is connected)

Twin configuration, 2 TMAs in one and same housing

Market leading reliability

State of the art low Noise Figure

Low TX insertion loss

Easy to install, wall mount bracket and hose clams for pole mount
included
No Maintenance

ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz)

2500-2570

Rejection

>85 dB

Gain (dB)

12

Return Loss

>18

Noise Figure

1.1 dB, Typical (TT26-0000112-011); 1.3 dB (TT26-0000112-001)

UL Output 3rd Order Intercept Point (dBm)


Bypass Loss (dB)

>+24
<2.0, Typical (Valid for TT26-0000112-001, TT26-0000112-011 without bypass)

Max Input Power (dBm)

+14

Downlink
Frequency Range (MHz)

2620-2690

Return Loss

>18

Insertion Loss (dB)

0.4, Typical

Intermodulation

@ 2 x +43 dBm Tx carriers in receive band, < -117 dBm, reffered to antenna port

Power Handling, RMS

>52 dBm (>160W)

Power Supply & Alarm


Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8 -30

Alarm Functionality

AISG compatible or in case of no AISG command received current alarm mode 170-190 mA

Power Consumption

<1.1 W per branch @ 12V

AISG Compatibility

AISG 2.0

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 8 2011 3:49PM
Rev pA3

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

35

TT26-0000112-0n1

Tower Mounted Amplifiers


BLOCK DIAGRAM

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch)

239x172x73 mm (9.4x6.8x2.9)

Weight (lbs)

<4.5kg (9.9 lbs)

Color

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL
Temperature Range

-40 C to +65 C (-40 F to + 149 F)

Operational

ETS 300 019-1-4

Transport

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65 and IP68

MECHANICAL OUTLINE

APPROVALS AND TESTS


Safety

EN60950

EMC

3GPP: TS 25.113

INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214.

ACCESSORIES
LGP21301, LGP21302

Outdoor Current Injector (01 female , 02 male ANT conn.)

D100314, D100312

LGP23301, LGP23303

Outdoor Current Injector (01 female , 02 male ANT conn.)

7060.00, 7060.05

CILOC (ANT)

LGP12101, 02, 03, 04

Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19)

7060.10, 7060.15

CILOC (BTS)

D100301, LG705

Indoor CIN cable (01: 7m, 05: 3m)

D105104, D105103

Outdoor CIN Cable (04: 10.3m, 03: 3m)

D100315, D100313

PDU Alarm Cable (15: 7m, 13: 3m)

7070.10, 7070.30, 7070.50

PDU Power Cable (14: 7m, 12: 3m)

MCU (10: AC, 30: 24V, 50: -48V)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 8 2011 3:49PM
Rev pA3

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

36

TT8D-0000112-0n1

Tower Mounted Amplifiers

TMA Twin 800 Digital Dividend 12 dB AISG 2.0 (Preliminary)

Introduction:
Enables the LNA to be placed close to the Antenna. By improving the receive
sensitivity the uplink coverage and capacity is increased and mobile talk time
extended. Powerwave Twin 800 Digital Dividend TMA offers state of the art
performance, size and weight enclosure in Twin configuration, two TMAs in
one housing with market leading reliability.

Features:

AISG compatible

Current Alarm Mode (When no AISG is connected)

Twin configuration, 2 TMAs in one and same housing

Market leading reliability

Low Noise Figure

Low TX insertion loss

Easy to install wall mount bracket and hose clams for pole mount
included
No Maintenance

ELECTRICAL SPECIFICATIONS
Uplink
Frequency Range (MHz)

832-862

Rejection

>80 dB

Gain (dB)

12

Return Loss

>18 dB

Noise Figure

<1.4dB, Typical

UL Output 3rd Order Intercept Point (dBm)

>+23

Bypass Loss (dB)

<1.6 Typical

Max Input Power (dBm)

+14

Downlink
Frequency Range (MHz)

791-821

Return Loss

>18 dB

Insertion Loss (dB)

0.4, Typical

Intermodulation

@ 2 x +43 dBm Tx carriers in receive band, <-115 dBm

Power Handling, RMS

>55 dBm

Power Supply & Alarm


Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received current alarm mode 170-190 mA

Power Consumption

<1.1 W per branch @ 12V

AISG Compatibility

AISG 2.0

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 8 2011 3:56PM
Rev pA2

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

37

TT8D-0000112-0n1

Tower Mounted Amplifiers


BLOCK DIAGRAM

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(inch)

273x170x120 mm

Weight (lbs)

<7kg (15.5 lbs)

Color

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL
Temperature Range

-40 C to +65 C (-40 F to + 149 F)

Operational

ETS 300 019-1-4

Transport

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65 and IP68

MECHANICAL OUTLINE

APPROVALS AND TESTS


Safety

EN60950

EMC

3GPP: TS 25.113

INSTALLATION INSTRUCTIONS
The TMA brackets included as part of the TMA support wall mount or pole mount. Two
hose clamps are included in the TMA package. The TMA can be installed in all
directions except flat with backside up 30. Ground the TMA and torque the jumper
cables with a torque wrench to 25 - 30 NM (18-22 ft lbs). For details see TMA
Installation and Service Manual 044-05214.

ACCESSORIES
LGP21301, LGP21302

Outdoor Current Injector (01 female , 02 male ANT conn.)

D100314, D100312

LGP23301, LGP23303

Outdoor Current Injector (01 female , 02 male ANT conn.)

7060.00, 7060.05

CILOC (ANT)

LGP12101, 02, 03, 04

Power Distribution Unit (01: 2 TMA module, 04: 6 TMAs 19)

7060.10, 7060.15

CILOC (BTS)

D100301, LG705

Indoor CIN cable (01: 7m, 05: 3m)

D105104, D105103

Outdoor CIN Cable (04: 10.3m, 03: 3m)

D100315, D100313

PDU Alarm Cable (15: 7m, 13: 3m)

7070.10, 7070.30, 7070.50

PDU Power Cable (14: 7m, 12: 3m)

MCU (10: AC, 30: 24V, 50: -48V)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 8 2011 3:56PM
Rev pA2

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

38

POWERWAVE

Tower Mounted Amplifiers

24501, 24511

TMA Twin 800 12 dB SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

824-849

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0 dB, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

869-894

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

24501 AISG 1.1 (Field upgradable to AISG 2.0); 24511 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x120 (9x6.7x4.8)

Weight (lbs)

<6 kg (13.2 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL 1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Feb 4 2010 11:29AM

39

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11177-0214

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1969.7-1984.7

UL Rejection

3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz

UL Gain (dB)

12

UL Return Loss

> 18 dB

UL Noise Figure

Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

<1.8 Typical. 3.7 Max

UL Max Input Power (dBm)

+10

DL Frequency Range (MHz)

2110-2170

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

Max 0.4

Intermodulation

<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

Input Voltage (V)

AISG mode: 10 - 30; CWA mode: 8.5 - 15

Alarm Functionality

Alarm Current: 250 mA

Power Consumption

Typical 1.3W per TMA (2.5 W Total)

Power Handling, RMS

52 dBm CW; 62 dBm peak

AISG Compatibility

2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

340x171x70 mm (13.4x6.7x2.8 inch)

Weight (lbs)

<4.5 Kg (9.9)

Colors

Off white (NCS 1502-R)

RF Connectors

7/16 Female

Mounting Kit

Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>350.000 Hours

Ingress Protection

IP 68

APPROVALS AND TESTS*


Safety

EN 60950

EMC

ETS 125 113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-05-05 17:29:05Z

40

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11182-02nn

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1920.5-1935.5

UL Rejection

3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz

UL Gain (dB)

12

UL Return Loss

> 18 dB

UL Noise Figure

Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

<1.8 Typical. 3.7 Max

UL Max Input Power (dBm)

+10

DL Frequency Range (MHz)

2110-2170

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

Max 0.4

Intermodulation

<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

Input Voltage (V)

AISG mode: 10 - 30; CWA mode: 8.5 - 15

Alarm Functionality

Alarm Current -0202: 250 mA

Power Consumption

Typical 1.3W per TMA (2.5 W Total)

Power Handling, RMS

52 dBm CW; 62 dBm peak

AISG Compatibility

2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

340x171x70 mm (13.4x6.7x2.8 inch)

Weight (lbs)

<4.5 Kg (9.9)

Colors

Off white (NCS 1502-R)

RF Connectors

7/16 Female

Mounting Kit

Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-11

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>350.000 Hours

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN 60950

EMC

ETS 125 113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-05-05 17:29:49Z

41

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-11183-02nn

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1964.9-1979.9

UL Rejection

3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz

UL Gain (dB)

12

UL Return Loss

> 18 dB

UL Noise Figure

Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

<1.8 Typical. 3.7 Max

UL Max Input Power (dBm)

+10

DL Frequency Range (MHz)

2110-2170

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

Max 0.4

Intermodulation

<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm)

Input Voltage (V)

AISG mode: 10 - 30; CWA mode: 8.5 - 15

Alarm Functionality

Alarm Current -0202: 250 mA; -0232: 180 mA

Power Consumption

Typical 1.3W per TMA (2.5 W Total)

Power Handling, RMS

52 dBm CW; 62 dBm peak

AISG Compatibility

2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

340x171x70 mm (13.4x6.7x2.8 inch)

Weight (lbs)

<4.5 Kg (9.9)

Colors

Off white (NCS 1502-R)

RF Connectors

7/16 Female

Mounting Kit

Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>350.000 Hours

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN 60950

EMC

ETS 125 113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Sep 21 2009 8:14AM

42

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

010-50025-0232

Tower Mounted Amplifier

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1950-1965

UL Rejection

3dBcBandwidth30MHz10dBcBandwidth40MHz50dBcBandwidth55MHz

UL Gain (dB)

12

UL Return Loss

> 18 dB

UL Noise Figure

Typical 1.2 dB, Max 1.7 dB

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

<1.8 Typical. 3.7 Max

UL Max Input Power (dBm)

+10

DL Frequency Range (MHz)

2110-2170

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

Max 0.4

Intermodulation

<-128 dBm in Rx Band (2 Tx Carriers at +43 dBm

Input Voltage (V)

AISG mode: 10 - 30; CWA mode: 8.5 - 15

Alarm Functionality

Alarm Current: 180 mA

Power Consumption

Typical 1.3W per TMA (2.5 W Total)

Power Handling, RMS

52 dBm CW; 62 dBm peak

AISG Compatibility

2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

340x171x70 mm (13.4x6.7x2.8 inch)

Weight (lbs)

<4.5 Kg (9.9)

Colors

Off white (NCS 1502-R)

RF Connectors

7/16 Female

Mounting Kit

Hose Clamps Included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>350.000 Hours

Ingress Protection

IP 68

APPROVALS AND TESTS*


Safety

EN 60950

EMC

ETS 125 113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Sep 21 2009 8:44AM

43

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25001, 25011

TMA Twin 900 12 dB SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

890-915

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0 dB, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

935-960

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

25001 AISG1.1 (Field upgradable to AISG 2.0); 25011 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x120 (9x6.7x4.8)

Weight (lbs)

<6 kg (13.2 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Apr 18 2011 5:41PM

44

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

25002, 25012

Tower Mounted Amplifiers

TMA Twin 900 EGSM 28 MHz 12 dB SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

880-908

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

925-953

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@ 12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

25002 AISG 1.1 (Field upgradable to AISG 2.0); 25012 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x120 (9x6.7x4.8)

Weight (lbs)

<6 kg (13.2 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL 1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Dec 29 2009 12:47PM

45

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25014, 25016

TMA Twin 900 16 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

890-915

UL Rejection

>82 dB

UL Gain (dB)

16

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0 dB, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

935-960

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode: 25014 170-190 mA; 25016
high CWA alarm current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x120 (9x6.7x4.8)

Weight (lbs)

<6 kg (13.2 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Dec 9 2010 9:45AM

46

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25101, 25111

TMA Single 900 12 dB SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

890-915

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0 dB, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

935-960

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

25101 AISG1.1 (Field upgradable to AISG 2.0); 25111 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x69 (9x6.7x2.7)

Weight (lbs)

<3 kg (<6.7 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Apr 18 2011 5:43PM

47

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

25102, 25112

Tower Mounted Amplifiers

TMA Single 900 EGSM 28 MHz 12 dB SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

880-908

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

925-953

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@ 12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

25102 AISG 1.1 (Field upgradable to AISG 2.0); 25112 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x69 (9x6.7x2.7)

Weight (lbs)

<3 kg (<6.7 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL 1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Feb 19 2010 6:10AM

48

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

25103, 25113

TMA Single 900 12 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

890-915

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.4 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.0 dB, Typical

UL Max Input Power (dBm)

+10 dBm

DL Frequency Range (MHz)

935-960

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4, Typical

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with high CWA (Current
Window Alarm)

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

25103 AISG1.1 (Field upgradable to AISG 2.0); 25113 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

228x169x69 (9x6.7x2.7)

Weight (lbs)

<3 kg (<6.7 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Apr 18 2011 5:42PM

49

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP192nn

Dual Duplex EGSM 900 MHz Full Band

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

880-915

UL Rejection

>83 dB

UL Gain (dB)

12

UL Return Loss

>20 dB, Typical

UL Noise Figure

< 1.7 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

2.0, Typical

UL Max Input Power (dBm)

+10

DL Frequency Range (MHz)

925-960

DL Return Loss

> 20 dB, Typical

DL Insertion Loss (dB)

<0.7 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carrier (dBc), <-115 (<-158)

Input Voltage (V)

8-17

Alarm Functionality

LGP19203 alarm current 170-190 mA; LGP19201 current alarm compatible with PDU LGP121nn

Power Consumption

@12 VDC, 1.5 W

Power Handling, RMS

>52 dBm

AISG Compatibility

N/A

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272 x 89 (7x11x4)

Weight (lbs)

<5.7 kg (12.3 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65

APPROVALS AND TESTS*


Safety

EN 60 950

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08405 Rev B Updated: Apr 18 2011 5:41PM

50

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP174nn

TMA DD 850 MHz with SMR Rejection

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

824-849

UL Rejection

SMR Rejection, >30 dB @ 851 MHz

UL Gain (dB)

12

UL Return Loss

>21 dB, Typical

UL Noise Figure

< 1.7 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

> +23, Typical

UL Bypass Loss (dB)

<2.2

UL Max Input Power (dBm)

+14

DL Frequency Range (MHz)

869-894

DL Return Loss

> 21 dB, Typical

DL Insertion Loss (dB)

< 0.45 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carrier dBm (dBc), <-118 (<-161)

Input Voltage (V)

8-17

Alarm Functionality

Two levels, individually supervised LNAs

Power Consumption

@12 VDC, 1.2 W

Power Handling, RMS

>57 dBm

AISG Compatibility

N/A

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

181 x 365 x 66 (7x12x4)

Weight (lbs)

<7.9 kg (17.4 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65

APPROVALS AND TESTS*


Safety

UL60 950

EMC

FCC Part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08411 Rev. A with added Bypass Loss Aug 24


2010 Updated: Apr 18 2011 5:39PM

51

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP175nn

Tower Mounted Amplifiers

TMA DD 1900 MHz with 10 dB Rejection at 1912 MHz

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1850-1910

UL Rejection

@1912 MHz, >10 dB

UL Gain (dB)

12

UL Return Loss

>20 dB

UL Noise Figure

< 1.6 dB

UL Output 3rd Order Intercept Point (dBm)

> +23

UL Bypass Loss (dB)

<2.6 dB

UL Max Input Power (dBm)

+14

DL Frequency Range (MHz)

1930-1990

DL Return Loss

> 20 dB

DL Insertion Loss (dB)

< 0.5 dB

Intermodulation

2 Tx@43 dBm (dBc), <-158

Input Voltage (V)

8-17

Alarm Functionality

Two levels, individually supervised LNAs

Power Consumption

@12 VDC, 1.2 W

Power Handling, RMS

>54 dBm

AISG Compatibility

N/A

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

181 x 365 x 66 (7x12x4)

Weight (lbs)

6.4 kg (14.1 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65

APPROVALS AND TESTS*


Safety

UL60 950

EMC

FCC Part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

PNLGP175nn Updated: Apr 18 2011 5:38PM

52

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP18510,
LGP18520

Twin Dual Duplex 1800 MHz Full Band

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1785

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.5 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+26 dBm, Typical

UL Bypass Loss (dB)

< 3.0 dB, Typical

UL Max Input Power (dBm)

+12

DL Frequency Range (MHz)

1805-1880

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

0.4 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA

Power Consumption

@12 VDC, 1.5 W per LNA

Power Handling, RMS

>53 dBm

AISG Compatibility

LGP18510 AISG 1.1 (field upgrdable to AISG 2.0), LGP18520 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272.5 x 67.7 (7x11x3)

Weight (lbs)

<4.5kg (9.9 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP 68

APPROVALS AND TESTS*


Safety

EN 60 950

EMC

ETS 301 489

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08228 Rev A Updated: May 30 2011 9:03AM

53

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP18520,
LGP18521

Twin Dual Duplex 1800 MHz Full Band

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1785

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.5 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+26 dBm, Typical

UL Bypass Loss (dB)

< 3.0 dB, Typical

UL Max Input Power (dBm)

+12

DL Frequency Range (MHz)

1805-1880

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

0.4 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

AISG compatible or in case of no AISG command received current alarm mode. Current alarm: LGP18520:
Low CWA, LGP18521: High CWA

Power Consumption

@12 VDC, 1.5 W per LNA

Power Handling, RMS

>53 dBm

AISG Compatibility

AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272.5 x 67.7 (7x11x3)

Weight (lbs)

<4.5kg (9.9 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP 68

APPROVALS AND TESTS*


Safety

EN 60 950

EMC

ETS 301 489

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Apr 18 2011 5:36PM

54

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP185nn

Twin Dual Duplex 1800 MHz Full Band

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1785

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.5 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+26 dBm, Typical

UL Bypass Loss (dB)

< 3.0 dB, Typical

UL Max Input Power (dBm)

+12

DL Frequency Range (MHz)

1805-1880

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

0.4 dB, Typical

Intermodulation

@ 2 x 43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

LGP18506: 170-190 mA alarm current; LGP18501: current alarm compatible with PDU LGP121nn;
LGP18507, 10, 17, 20, 21 AISG compatible or in case of no AISG command received current alarm mode:
LGP18510, 20: 170-190 mA; LGP18507, 17: current alarm compatible with PDU LGP121nn

Power Consumption

@12 VDC, 1.5 W per LNA

Power Handling, RMS

>53 dBm

AISG Compatibility

LGP18501, 06 no AISG; LGP18507, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18517, 20, 21 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272.5 x 67.7 (7x11x3)

Weight (lbs)

<4.5kg (9.9 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP 68 (LGP18501, 06 upgraded from IP65 to IP68 week 36 2011)

APPROVALS AND TESTS*


Safety

EN 60 950

EMC

ETS 301 489

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08219 Rev D Updated: Sep 8 2011 10:32AM

55

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

LGP186nn

Twin Dual Duplex 1900 MHz Full Band

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1850-1910

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.5 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+26 dBm, Typical

UL Bypass Loss (dB)

< 3.0 dB, Typical

UL Max Input Power (dBm)

+12

DL Frequency Range (MHz)

1930-1990

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

0.4 dB, Typical

Intermodulation

@ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

LGP18606: 170-190 mA alarm current; LGP18601: current alarm compatible with PDU LGP121nn;
LGP18607, 10, 17, 20 AISG compatible or in case of no AISG command received current alarm mode:
LGP18610, 20: 170-190 mA; LGP18607, 17: current alarm compatible with PDU LGP121nn

Power Consumption

@12 VDC, 1.5 W per LNA

Power Handling, RMS

>53 dBm

AISG Compatibility

LGP18601, 06 no AISG; LGP18607, 10 AISG 1.1 (field upgrdable to AISG 2.0), LGP18617, 20 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272.5 x 67.7 (7x11x3)

Weight (lbs)

<4.5kg (9.9 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP 68 (LGP18601, 06 upgraded from IP65 to IP68 week 36 2011)

APPROVALS AND TESTS*


Safety

UL60 950, ETL

EMC

FCC Part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08220 Rev C Updated: Sep 8 2011 11:03AM

56

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP18611

Tower Mounted Amplifiers

Twin Dual Duplex 1900 MHz Full Band (65 MHz BW)

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1850-1915

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

1.5 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+26 dBm, Typical

UL Bypass Loss (dB)

3.0 dB, Typical

UL Max Input Power (dBm)

+12

DL Frequency Range (MHz)

1930-1995

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

0.5 dB, Typical

Intermodulation

@ 2 x +43 dBm Tx carriers, In receive band, <- 116 dBm, referred to Antenna port (<-159 dBc)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

LGP18611: AISG compatible or in case of no AISG command received current alarm mode: 170-190 mA

Power Consumption

@12 VDC, 1.5 W per LNA

Power Handling, RMS

>53 dBm

AISG Compatibility

AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

169 x 272.5 x 67.7 (7x11x3)

Weight (lbs)

<4.5kg (9.9 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP 68

APPROVALS AND TESTS*


Safety

UL60 950, ETL

EMC

FCC Part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08230 Rev A Updated: Oct 3 2011 11:38AM

57

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TSAW-07BP111-001

Tower Mounted Amplifiers

TMA Dual Band AWS with 700 Bypass 13 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1770 with 698-746 bypass

UL Rejection

>80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz

UL Gain (dB)

13

UL Return Loss

>18 dB

UL Noise Figure

<1.6 dB

UL Output 3rd Order Intercept Point (dBm)

>+23 (Input IP3 >+11)

UL Bypass Loss (dB)

<1.9

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

2110-2170 with 698-746 bypass

DL Return Loss

>18 dB

DL Insertion Loss (dB)

<0.4

Intermodulation

<-155 dBc (2x43 dBm TX)

Input Voltage (V)

8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<1.5 W

Power Handling, RMS

700: 500 W; AWS 300W

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TSAW-07BP112001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

250x169x82 (9.9x6.7x3.1)

Weight (lbs)

<9 (<4 kg)

Colors

Off white (NCS 1502-R)

RF Connectors

Female 7/16 DIN, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 to +65C

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s

Housing

Aluminium

MTBF

>1 million hours

Ingress Protection

IP67 minimum

APPROVALS AND TESTS*


Safety

UL 60950; UL 1950, TUV

EMC

FCC part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 2 2010 4:47AM

58

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TTAW-07BP111-001

Tower Mounted Amplifiers

TMA Twin Dual Band AWS with 700 Bypass 13 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1770 with 698-746 bypass

UL Rejection

>80 dB TX rejection, >25 dB rejection at 1700 and 1800 MHz

UL Gain (dB)

13

UL Return Loss

>18 dB

UL Noise Figure

<1.6 dB

UL Output 3rd Order Intercept Point (dBm)

>+23 (Input IP3 >+11)

UL Bypass Loss (dB)

<1.9

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

2110-2170 with 698-746 bypass

DL Return Loss

>18 dB

DL Insertion Loss (dB)

<0.4

Intermodulation

<-155 dBc (2x43 dBm TX)

Input Voltage (V)

8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<1.5 W

Power Handling, RMS

700: 500 W; AWS 300W

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW-07BP112001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

250x169x139 (9.9x6.7x5.4)

Weight (lbs)

<18 (<8 kg)

Colors

Off white (NCS 1502-R)

RF Connectors

Female 7/16 DIN, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 to +65C

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s

Housing

Aluminium

MTBF

>1 million hours

Ingress Protection

IP67 minimum

APPROVALS AND TESTS*


Safety

UL 60950; UL 1950, TUV

EMC

FCC part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 2 2010 4:48AM

59

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TTAW-0000112-001

TMA Micro Twin AWS 12 dB AISG 2.0

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1755

UL Rejection

>82 dB

UL Gain (dB)

12

UL Return Loss

>20

UL Noise Figure

<1.4 dB

UL Output 3rd Order Intercept Point (dBm)

>+23

UL Bypass Loss (dB)

<2.0, Typical

UL Max Input Power (dBm)

+14

DL Frequency Range (MHz)

2110-2155

DL Return Loss

>20

DL Insertion Loss (dB)

<0.3

Intermodulation

@ 2 x +43 dBm Tx carriers in receive band, <-160 dBc, reffered to antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 9 -17

Alarm Functionality

AISG compatible cor in case of no AISG command received current alarm mode 170-190 mA

Power Consumption

<1.1 W per branch @ 12V

Power Handling, RMS

>49 dBm (4x43 dBm)

AISG Compatibility

AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

192x154x50 mm (7.6x5.9x2.0)

Weight (lbs)

<2.5kg (5.5 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to + 149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s, 8kA 8/20 s, 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours

Ingress Protection

IP65 and IP68

APPROVALS AND TESTS*


Safety

EN60950

EMC

3GPP: TS 25.113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev B Updated: Oct 6 2010 9:01AM

60

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TTAW-60BW111-001

Tower Mounted Amplifiers

TMA Micro Twin AWS 60 MHz BW 12 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1710-1770

UL Rejection

>80 dB

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

<1.8 dB Max over temp; Average Weighted NF* @ +25C <1.3 dB


(NF@low_bandedge+2xNF@midband+NF@high_bandedge)/4*

UL Output 3rd Order Intercept Point (dBm)

>+22 (Input IP3 >+10)

UL Bypass Loss (dB)

<2.6

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

2110-2170

DL Return Loss

>18 dB

DL Insertion Loss (dB)

<0.35

Intermodulation

<-155 dBc (2x43 dBm TX)

Input Voltage (V)

8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<2 W

Power Handling, RMS

300 W

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TTAW60BW112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

192x154x50 mm (7.6x5.9x2.0)

Weight (lbs)

<7 (<3 kg)

Colors

Off white (NCS 1502-R)

RF Connectors

Female 7/16 DIN, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 to +65C

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s

Housing

Aluminium

MTBF

>1 million hours per TMA

Ingress Protection

IP67 minimum

APPROVALS AND TESTS*


Safety

UL 60950; UL 1950, TUV

EMC

FCC part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev A Updated: Nov 18 2011 12:30PM

61

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TS07-AWDB111-001

TMA Dual Band 700/AWS 13 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

698-716 and 1710-1770

UL Rejection

TX rejection >80 dB; 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz; AWS TMA: >25 dB rejection at
1700 and 1800 MHz

UL Gain (dB)

13

UL Return Loss

>18 dB

UL Noise Figure

AWS: < 1.6 dB, 700: <2.0 dB

UL Output 3rd Order Intercept Point (dBm)

>+22 (Input IP3 >+10)

UL Bypass Loss (dB)

AWS: <2.0, 700: < 2.9

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

728-746 and 2110-2170

DL Return Loss

>18 dB

DL Insertion Loss (dB)

<0.4

Intermodulation

<-155 dBc (2x43 dBm TX)

Input Voltage (V)

8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<1.5 W (per LNA)

Power Handling, RMS

700: 500 W; AWS 300W

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only depended on loaded SW version) TS07AWDB112-001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

305x305x127 (12x12x5)

Weight (lbs)

<27.6 (<12.5 kg)

Colors

Off white (NCS 1502-R)

RF Connectors

Female 7/16 DIN, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 to +65C

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s

Housing

Aluminium

MTBF

>1 million hours per TMA

Ingress Protection

IP67 minimum

APPROVALS AND TESTS*


Safety

UL 60950; UL 1950, TUV

EMC

FCC part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 2 2010 4:50AM

62

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Tower Mounted Amplifiers

TS07-AWDB112-001

TMA Dual Band 700/AWS 13 dB AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

698-716 and 1710-1770

UL Rejection

>80 dB TX rejection, 700 TMA: >40 dB rejection at 697.8 and at 716.2 MHz (Roll off beginns at 699.25 and
714.75), AWS TMA: >25 dB at 1700 and 1800 MHz

UL Gain (dB)

13

UL Return Loss

>18 dB

UL Noise Figure

AWS: < 1.6 dB, 700: <2.0 dB

UL Output 3rd Order Intercept Point (dBm)

>+22 (Input IP3 >+10)

UL Bypass Loss (dB)

AWS: <2.0, 700: < 2.9

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

728-746 and 2110-2170

DL Return Loss

>18 dB

DL Insertion Loss (dB)

<0.4

Intermodulation

<-155 dBc (2x43 dBm TX)

Input Voltage (V)

8.0-30V (AISG Mode 10-30V; Current Alarm Mode 8-17)

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<1.5 W (per LNA)

Power Handling, RMS

700: 500 W; AWS 300W

AISG Compatibility

AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

305x305x130 (12x12x5.2)

Weight (lbs)

<30 (<13.6 kg)

Colors

Off white (NCS 1502-R)

RF Connectors

Female 7/16 DIN, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 to +65C

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

IEC 61312-1: 2 kA 8/20 s, 3 kA 10/350 s

Housing

Aluminium

MTBF

>1 million hours per TMA

Ingress Protection

IP67 minimum

APPROVALS AND TESTS*


Safety

UL 60950; UL 1950, TUV

EMC

FCC part 15

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 2 2010 4:51AM

63

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TT08-19DB111-001

Tower Mounted Amplifiers

TMA Twin Dual Band 850/1900 12 dB AISG 1.1

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

824-849 / 1850-1910

UL Rejection

SMR Rejection, >30 dB @ 851 MHz

UL Gain (dB)

12

UL Return Loss

>18 dB

UL Noise Figure

<1.7 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

+25, Typical

UL Bypass Loss (dB)

2.5, Typical

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

869-894 / 1930-1990

DL Return Loss

> 18 dB

DL Insertion Loss (dB)

850 MHz, 0.4; 1900 MHz, 0.5

Intermodulation

@ 2 x +43 dBm Tx carriers, in receive band, <-160 dBc, referred to antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8 -17

Alarm Functionality

AISG compatibe or in case of no AISG command received current alarm mode 270-290 mA

Power Consumption

< 1.8 W per branch @ 12V

Power Handling, RMS

850: >57 dBm; 1900: >55 dBm

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT08-19DB112001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

360x169x137mm (14.2x6.7x5.4)

Weight (lbs)

<22

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to + 149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours (per TMA)

Ingress Protection

IP65 and IP68

APPROVALS AND TESTS*


Safety

EN 60950

EMC

3GPP: TS 25.113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev B Updated: Mar 28 2011 2:25PM

64

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TT19-08BP111-001

Tower Mounted Amplifiers

TMA Twin 1900 with 850 Bypass 12 dB AISG 1.1

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

1850-1910 with 824-894 bypass

UL Rejection

>77 dB

UL Gain (dB)

12

UL Return Loss

>18

UL Noise Figure

<1.7 dB, Typical

UL Output 3rd Order Intercept Point (dBm)

>+23

UL Bypass Loss (dB)

2.5, Typical

UL Max Input Power (dBm)

+14 dBm

DL Frequency Range (MHz)

1930-1990 with 824-894 bypass

DL Return Loss

>18

DL Insertion Loss (dB)

850 MHz, <0.3; 1900 MHz, <0.5

Intermodulation

@ 2 x +43 dBm TX carriers, in receive band, <160 dBc, reffered to antenna port

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode 170-190 mA

Power Consumption

<1.1W @12V

Power Handling, RMS

850: >57 dBm; 1900: >55 dBm

AISG Compatibility

AISG 1.1 fully upgreadable to AISG 2.0 (AISG version only dependent on loaded SW version) TT19-08BP112001 has AISG 2.0 loaded from factory

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

250x169x137 mm (9.9x6.7x5.4)

Weight (lbs)

<16

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 female, long neck

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40 C to +65 C (-40 F to +149 F)

Operational

ETS 300 019-1-4

Transportation

ETS 300 019-1-2

Storage

ETS 300 019-1-1

Lightning Protection

3 kA 10/350 s; 20 kA (Shield)

Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP65 and IP68

APPROVALS AND TESTS*


Safety

EN60950

EMC

3GPP: TS 25.113

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Rev B Updated: Feb 4 2010 11:13AM

65

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TU09-000001n-001

Tower Mounted Amplifiers

ACTIVE UGC 900 12dB VAR GAIN SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

890-915

UL Rejection

>82 dB

UL Gain (dB)

Variable 0-12 in 1 dB steps

UL Return Loss

>18 dB

UL Noise Figure

1.5dB, typical at 12 dB gain

UL Output 3rd Order Intercept Point (dBm)

+25, typical

UL Bypass Loss (dB)

<5.5 (Including 3 dB hybrid loss)

UL Max Input Power (dBm)


DL Frequency Range (MHz)

935-960

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.4

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

TU09-0000011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU09-0000012-001 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

230.5x171x160 (9.1x6.8x6.3)

Weight (lbs)

<7 kg (15.4 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational
Transportation
Storage
Lightning Protection
Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 29 2010 5:11AM

66

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TU9E-28BW01n-001

Tower Mounted Amplifiers

ACTIVE UGC 900 EGSM 28MHz BW 12dB VAR GAIN SL AISG

ELECTRICAL SPECIFICATIONS*
UL Frequency Range (MHz)

880-908

UL Rejection

>82 dB

UL Gain (dB)

Variable 0-12 in 1 dB steps

UL Return Loss

>18 dB

UL Noise Figure

1.5dB, typical at 12 dB gain

UL Output 3rd Order Intercept Point (dBm)

+25, typical

UL Bypass Loss (dB)

<5.5 (Including 3 dB hybrid loss)

UL Max Input Power (dBm)


DL Frequency Range (MHz)

925-953

DL Return Loss

>18 dB

DL Insertion Loss (dB)

0.65 maximum

Intermodulation

<-118 dBm (@ 2x43 dBm Tx carriers)

Input Voltage (V)

AISG Mode: 10-30; Current alarm mode: 8.5 -17

Alarm Functionality

AISG compatible or in case of no AISG command received, current alarm mode with 170-190 mA alarm
current

Power Consumption

@12 VDC, 1.5W per LNA

Power Handling, RMS

>53.5 dBm

AISG Compatibility

TU9E-28BW011-001 AISG 1.1 (Field upgradable to AISG 2.0); TU9E-28BW012-001 AISG 2.0

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

230.5x171x160 (9.1x6.8x6.3)

Weight (lbs)

<7 kg (15.4 lbs)

Colors

Off white (NCS 1502-R)

RF Connectors

DIN 7/16 Female

Mounting Kit

Mounting kit for pole and wall is included

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range

-40C to +65C (-40F to +149F)

Operational
Transportation
Storage
Lightning Protection
Housing

Aluminum

MTBF

>1 million hours per TMA

Ingress Protection

IP68

APPROVALS AND TESTS*


Safety

EN60950, UL1950, ETL

EMC

ETS 300 342-3

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08819B Updated: Oct 21 2011 12:56PM

67

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Base Station Products

POWERWAVE

Power Distribution Units

TMA Products
Power Distribution Units

Title

Up-Link (MHz)

Down-Link (MHz)

Part Number

Page

PDU Lite Indoor

N/A

N/A

LGP121nn

69

PDU Lite Indoor (For


Dual Band TMAs)

N/A

N/A

LGP18104

70

PDU Lite Indoor

N/A

N/A

LGP12101

71

68

POWERWAVE

TMA Products

LGP121nn

PDU Lite Indoor

ELECTRICAL DATA
Input Voltage

20 to 60 V DC, positive or negative

Input Current (Max)

1A

Input Protection and Polarity

Automatic Polarity Agile

Output Voltage

12 V DC +/- 1 V

Output Current (Max)

375 mA/port

Output Protection

Automatic short-circuit protection, auto recovery

Sum Alarm Output Port

Relay Normally Open and Normally Closed

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft)

3.9 x 0.8 x 2.4 in

Weight (lbs)

120 g (0.3 lbs.)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-33 C to +60 C (-27 F to +140 F)

Humidity

5-95% RH non condensing

MTBF

>1 million hours

APPROVALS AND TESTS


EMC

ETS 300 342-3

Environmental

ETS 300 019

D031-08280 Rev A Updated: Apr 18 2011 5:37PM

69

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP18104

TMA Products

PDU Lite Indoor (For Dual Band TMAs)

ELECTRICAL DATA
Input Voltage

20-60 V DC, positive or negative

Input Current (Max)

3x1 A

Input Protection and Polarity

Automatic Polarity Agile

Output Voltage

12 V DC +/- 1 V

Output Current (Max)

375 mA/port

Output Protection

Automatic short-circuit protection, auto recovery

Sum Alarm Output Port

Relay Normally Open and Normally Closed

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft)

19 1HU (19 x 1.75)

Weight (lbs)

700 (1.55)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-33 to +60 (-27 to +140)

Humidity

5-95% RH non condensing

MTBF

>1 000 000 hours (over 100 years)

APPROVALS AND TESTS


EMC

ETS 300 342-3

Environmental

ETS 300 019

Updated: Sep 21 2009 8:25AM

70

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

TMA Products

LGP12101

PDU Lite Indoor

ELECTRICAL DATA
Input Voltage

20 to 60 V DC, positive or negative

Input Current (Max)

1A

Input Protection and Polarity

Automatic Polarity Agile

Output Voltage

12 V DC +/- 1 V

Output Current (Max)

375 mA/port

Output Protection

Automatic short-circuit protection, auto recovery

Sum Alarm Output Port

Relay Normally Open and Normally Closed

MECHANICAL SPECIFICATIONS
Dimensions, HxWxD, mm(ft)

3.9 x 0.8 x 2.4 in

Weight (lbs)

120 g (0.3 lbs.)

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-33 C to +60 C (-27 F to +140 F)

Humidity

5-95% RH non condensing

MTBF

>1 million hours

APPROVALS AND TESTS


EMC

ETS 300 342-3

Environmental

ETS 300 019

D031-08280 Rev A Updated: Apr 18 2011 5:49PM

71

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Base Station Products

POWERWAVE

Current Injectors

TMA Products
Current Injectors

Frequency Range (MHz)

Return Loss (dB)

Insertion Loss (dB)

Part Number

Page

806-960 and 1710-2170

>20

<0.1

LGP213nn

73

806-960 and 1710-2170

>20

<0.1

LGP233nn

74

806-960 or 1710-1990

>25

<0.1

LGP138nn

75

698-960 and 1710-2690

>20

<0.1

LGP23302

76

72

POWERWAVE

Current Injectors

LGP213nn

Outdoor Current Injector

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698 - 960 and 1710 - 2690 (Frequency extended: LGP21301 from Rev L, LGP21302 from Rev K, Sep 1 2010)

Return Loss (dB)

>20

Insertion Loss (dB)

< 0.1

DC Current (Max)

1.5 A

Intermodulation 2x 43 dBm Tx Carriers dBm

<-116 dBm (<-159 dBc)

MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in)

87 x 41 x 51 (3.4 x 1.6 x 2.0)

Weight kg(lbs)

0.32 (0.71)

Color

Off-white, NCS 1502R

Housing

Aluminum

RF Connectors

DIN 7/16 female and male LGP21301 ANT female, BTS male LGP21302 ANT male, BTS female

DC Supply Connector

SMA female

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40 to +65 (-40 to +149)

MTBF

>1 000 000 hours

Safety

EN 609 50, UL 60950, ETL

Ingress Protection

IP 68 - EN 60 529

Evironmental

ETS 300 019

Lightning Protection

IEC 61312-1

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08406 Rev. C Updated: Sep 20 2011 10:02AM

73

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injectors

LGP233nn

Indoor Current Injector

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)

Return Loss (dB)

>20

Insertion Loss (dB)

<0.1

DC Current (Max)

1.5 A

Intermodulation 2x 43 dBm Tx Carriers dBm

<-116 dBm (<-159 dBc)

MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in)

87 x 41 x 51 (3.4 x 1.6 x 2.0)

Weight kg(lbs)

0.32 (0.71)

Color

Silver plating

Housing

Zink Alloy

RF Connectors

DIN 7/16 female and male LGP23301 ANT female, BTS male LGP23302 ANT male, BTS female

DC Supply Connector

SMB male

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-5 to +55 (23 to +131)

MTBF

>1 000 000 hours (over 100 years)

Safety

EN 609 50, UL 609 50, ETL

Ingress Protection

IP 54 - EN 605 29

Evironmental

ETS 300 019

Lightning Protection

IEC 61312-1

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08407 Rev. C Updated: Sep 20 2011 10:07AM

74

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injectors

LGP138nn

Outdoor Current Injector

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806 - 960MHz or 1710 - 1990

Return Loss (dB)

>25

Insertion Loss (dB)

< 0.1

DC Current (Max)

1A

Intermodulation 2x 43 dBm Tx Carriers dBm

<-110 dBm, (<-153)

MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in)

107 x 48 x 62 (4.2 x 1.9 x 2.4)

Weight kg(lbs)

0.45 (<1)

Color

Off-white, NCS 1502R

Housing

Aluminum

RF Connectors

DIN 7/16 or type N female and male

DC Supply Connector

Screw Terminal Block

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40 to +65 (-40 to +149)

MTBF

>1 000 000 hours

Safety

EN 609 50, UL 60950, ETL

Ingress Protection

IP 65 - EN 60 529

Evironmental

ETS 300 019

Lightning Protection

IEC 1312-1

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08276 Rev B Updated: Sep 14 2010 4:00PM

75

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injectors

LGP23302

Indoor Current Injector

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698 - 960 and 1710 - 2690 (Frequency extended: LGP23301 and LGP23302 from Rev M, Sep 1 2010)

Return Loss (dB)

>20

Insertion Loss (dB)

<0.1

DC Current (Max)

1.5 A

Intermodulation 2x 43 dBm Tx Carriers dBm

<-116 dBm (<-159 dBc)

MECHANICAL SPECIFICATIONS*
Dimensions - Without Mounting Plate - mm(in)

87 x 41 x 51 (3.4 x 1.6 x 2.0)

Weight kg(lbs)

0.32 (0.71)

Color

Silver plating

Housing

Zink Alloy

RF Connectors

DIN 7/16 female and male; LGP23302 ANT male, BTS female

DC Supply Connector

SMB male

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-5 to +55 (23 to +131)

MTBF

>1 000 000 hours (over 100 years)

Safety

EN 609 50, UL 609 50, ETL

Ingress Protection

IP 54 - EN 605 29

Evironmental

ETS 300 019

Lightning Protection

IEC 61312-1

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08407 Rev. C Updated: Sep 20 2011 10:09AM

76

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Filter Products

Base station co-siting and new technology overlays are


growing trends around the globe and Powerwave is leading
the way with a range of same band, dual band and triple
band solutions. There are many reasons for adopting
co-siting filter solutions, including limited tower space,
zoning regulations and public opinion against new site
locations. In addition, as newer technology platforms
such as UMTS or LTE are deployed the need for
straightforward, low loss, high performance feedline
consolidation solutions are required to allow operators to
maximize existing network CAPEX by reusing installed
cable and antenna structures.

Diplexer/Crossband Combiner
Duplexers
Same Band Combiner T1
Triplexer/Crossband
Combiners
Interference Filters

Base Station Products

POWERWAVE

Filters

Base Station Products


Filters

Range (MHz)

Insertion Loss (dB)

Return Loss (db)

Part Number

698-793

0.30 dB (0.15 dB typical)

20 dB

CM1002-DPBXBC

79

698-2170

700/800 Port: 0.15 dB max.

20 dB minimum

CM1007-DBPXBCxxx

81

790+862

0.35 dB (0.15 dB typical)

20 dB

CM1015-DPBXBCxxx

83

14 dB minimum

010-11198-0002

85

817-869

1.0 dB maximum

Page

824-894

4.2 dB maximum

18 dB minimum

CM1000-AMPS-xxx

86

880-960

4.5 dB maximum

18 dB minimum

CM1001-EGSMxxx

87

1710-2170

0.3 dB maximum (Rx)


0.6 dB maximum (Tx)

18 dB minimum

LGP145nn

88

1850-1990

0.6 dB maximum (Rx)

18 dB minimum

LGP146nn

89

880-2170

0.2 dB maximum

20 dB minimum

LGP141nn

90

890-960

-01: <1.5 dB (<3.5 dB 890-892 MHz)


-02: <1.0 dB (<1.8 dB 890-892 MHz)
-03: <1.5 dB (< 3.5 dB 896-898 MHz)

>18 dB

LGP195nn

91

824-2170

<0.1 dB Typical

20 dB minimum

LGP219nn

92

78

CM1002-DBPXBC

Filters

Diplex Filter for LTE700 and 800 MHz with DC Auto Sense

Introduction:
The CM1002-DBPXBC is a high performance 698-793 MHz + 824-894 MHz
Crossband Combiner Diplexer intended for North America LTE700 + 850
applications. Low loss, high isolation, high power handling, low IMD and
options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF
Sniffer Port and integrated CILOC are all available.

Features:

60 dB Isolation, 0.30 dB maximum Insertion Loss

Power Handling 500 watts/5 kW PEP minimum per Channel

Low IMD -117 dBm (-160 dBc) maximum

DC-Auto Sense DC/AISG Feedthrough Option

Common Sniffer Port and Integrated CILOC Options

Hard Wired DC/AISG Feedthrough Options

ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
Insertion Loss
Return Loss
Rejection

Low Port, 698-793 MHz

High Port, 824-894 MHz

0.30dB(0.15dBtypical)

0.30dB(0.15dBtypical)

20dB

20dB

60dB@824-894 MHz

60dB@698-793 MHz

Isolation (Channel to Channel)

60dB

Average Power Handling (RMS)

500 watts (+57 dBm) max. (per channel)

Peak Power (dBm)

5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

Intermodulation Products (dBc)

5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel

DC Feedthrough Capacity

TMA Supply Voltage, Fed Via RF Cable, +31VDC, 2A maximum

DC AISG Feedthru -001 (Single)/ -008 (Twin)

DC/AISG Auto-Sense from low or high channels (see logic table)

DC AISG Feedthru -002 (Single)/ -009 (Twin)

Option -001 + Sniffer Port -43 to -30 dB (698-793 and 824-894 MHz)

DC AISG Feedthru -003 (Single)/ -010 (Twin)

Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0)

DC AISG Feedthru -004 (Single)/ -011 (Twin)

All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function)

DC AISG Feedthru -005 (Single)/ -012 (Twin)

All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense)

DC AISG Feedthru -006 (Single)/ -013 (Twin)

Low frequency channel is hard-wired connected to common port (no DC Auto-Sense)

DC AISG Feedthru -007 (Single)/ -014 (Twin)

High frequency channel is hard-wired connected to common port (no DC Auto-Sense)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 2 2011 1:37PM
D031-08697C

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

79

CM1002-DBPXBC

Filters

MECHANICAL SPECIFICATIONS

DC/AISG FEEDTHROUGH/APPLICATION TABLE

RF Connectors

DIN 7/16 female, long neck

RF Sniffer Connector

N female (IP67 cap included)

AISG Connector

Per IEC-60130-9 (IP67 cap included)

Dimensions, HxwxD, mm(in)

Single: 240mm x 210mm x 83mm (9.4 x


8.3 x 3.3); Twin: 240mm x 210mm x
153mm (9.4 x 8.3 x 6)

Weight, with brackets, kg(lbs)

Single: 4.6 (10.1); Twin: 8.3 (18.3)

Housing Composition/Color

Aluminum/Off-White (NCS 1502-R)

Mounting Kit

Hose Clamps in Stainless Steel

DC Auto Sense Logic Table

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (F)

-40to +65(-40to +149)

Lightning Protection

According to IEC 61312-1, 3kA 10/350


uS;center pin (any port)-shield

Ingress Protection

IP65/IP67 (IP rated cap must be used on


any unused ports)

Environmental

ETS 300 019

EMC

ETS 300 342-3

Safety

EN60950, UL 1950, ET

DC/AISG Function
Table by Model

Low Port (698-793


MHz)

High Port (824-894 AISG Port DC/AISG


MHz)
Connection

Tower Top
Capable

CM1002-DBPXBC001/-008

#1 Priority
Connection

#2 Priority
Connection

N/A

DC AutoSense&

Yes Common to
Low Port Only

CM1002-DBPXBC002/-009

#1 Priority
Connection

#2 Priority
Connection

N/A

DC AutoSense&

Yes Common to
Low Port Only

CM1002-DBPXBC003/-010

#2 Priority
Connection

#3 Priority
Connection

CM1002-DBPXBC004/-011

No Connection

No Connection

N/A

Hard-Wired

Yes

CM1002-DBPXBC005/-012

Connection

Connection

N/A

Hard-Wired

Yes

CM1002-DBPXBC006/-013

Connection

No Connection

N/A

Hard-Wired

Yes

CM1002-DBPXBC007/-014

No Connection

Connection

N/A

Hard-Wired

Yes

#1 Priority DC AutoConnection Sense&

No - BTS
location
only

NOTES
Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.

RESPONSE PLOTS

LowChannelS21Response

S21IsolationResponse

CommonPortS22ReturnLoss

HighChannelS21Response

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 2 2011 1:37PM
D031-08697C

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

80

CM1007-DBPXBC-xxx

Filters

Diplex Filter for LTE700/800 MHz and AWS/PCS with DC Auto Sense

Introduction:
The CM1007-DBPXBC is a high performance 698-894 MHz + 1710-2170
MHz Crossband Combiner Diplexer intended for North America LTE700/850
+ AWS/PCS, and Global LTE800 + DCS/UMTS applications. Low loss, high
isolation, high power handling and options or either DC-Auto Sense or HardWired DC/AISG feedthrough, RF Sniffer Port and integrated CILOC are all
available

Features:

60 dB Isolation, 0.15 dB maximum Insertion Loss

Power Handling 500 watts/5 kW PEP minimum per Channel

Low IMD -115 dBm (-158 dBc) maximum

DC-Auto Sense DC/AISG Feedthrough Option

Common Sniffer Port and Integrated CILOC Options

Hard Wired DC/AISG Feedthrough Options

ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
Insertion Loss
Return Loss
Rejection

Low Port, 698-894 MHz

High Port, 1710-2170 MHz

0.15dB(0.08dBtypical)

0.15dB(0.08dBtypical)

20dB

20dB

60dB@1710-2170 MHz

60dB@698-894 MHz
60dB

Isolation (Channel to Channel)


Average Power Handling (RMS)
Peak Power (dBm)

500 watts (+57 dBm) max. (per channel)


5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch

Intermodulation Products (dBc)

5 kW (+67 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch (per channel)

DC Feedthrough Capacity

TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max.

DC Bias/AISG Auto-Sense (-001 Option)

DC/AISG Auto-Sense from low or high channels (see logic table below)

Antenna Sniffer Port (-002 Option)

Option -001 + Sniffer Port -43 to -30 dB (698-894 and 1710- 2170 MHz)

AISG Port & Integrated CILOC (-003 Option)


DC/AISG Feedthru Delete (-004 Option)
DC/AISG Common All Ports (-005 Option)

Options -001 & -002 + AISG Connector (Internal Converter AISG 1.1/2.0 Compatible)
All ports are DC and AISG isolated from each other (no Auto-Sense function)
All ports are permanently connected for DC and AISG connectivity (no Auto-Sense function)

DC/AISG Low to Common Port (-006 Option)

Low frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)

DC/AISG High to Common Port (-007 Option)

High frequency channel is permanently connected for DC and AISG connectivity (no Auto-Sense function)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 2 2011 1:40PM
D031-08690B

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

81

CM1007-DBPXBC-xxx

Filters

MECHANICAL SPECIFICATIONS

DC/AISG FEEDTHROUGH/APPLICATION TABLE

RF Connectors

DIN 7/16 female, long neck

RF Sniffer Connector

N female (IP67 cap included)

AISG Connector

Per IEC-60130-9 (IP67 cap included)

Dimensions, HxwxD, mm(in)

125 x 227.5 x 83 (4.92 x 8.96 x 3.27),


excluding connectors and bracket

Weight, with brackets, kg(lbs)

3.0 (6.5)

Housing Composition/Color

Aluminum/Off-White (NCS 1502-R)

Mounting Kit

Hose Clamps in Stainless Steel

DC Auto Sense Logic Table


DC/AISG Feedthru

#2 Priority
Connection

#1 Priority
Connection

N/A

DC Auto- Yes - Common to


Sense&
High Port Only

CM1007-DBPXBC-002

#2 Priority
Connection

#1 Priority
Connection

N/A

DC Auto- Yes - Common to


Sense&
High Port Only

CM1007-DBPXBC-003

#3 Priority
Connection

#2 Priority
Connection

CM1007-DBPXBC-005

Operating Temperature (F)

-40to +65(-40to +149)

Lightning Protection

IEC 61312-1, 3 kA 10/350 s, 8 kA 8/20 s

Ingress Protection

IP67 (IP67 rated cap must be used on any


unused ports)

Environmental

ETS 300 019

EMC

ETS 300 342-3

Safety

EN60950, UL 1950, ET

Tower Top
Capable

CM1007-DBPXBC-001

CM1007-DBPXBC-004

ENVIRONMENTAL SPECIFICATIONS

Low Port
High Port
AISG Port DC/AISG
(698-894 MHz) (1710-2170 MHz)
Connection

No Connection No Connection

#1 Priority DC Auto- No - BTS location


Connection Sense&
only
N/A

Hard-Wired

Yes

Connection

Connection

N/A

Hard-Wired

Yes

CM1007-DBPXBC-006

Connection

No Connection

N/A

Hard-Wired

Yes

CM1007-DBPXBC-007

No Connection

Connection

N/A

Hard-Wired

Yes

NOTES
Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.

RESPONSE PLOTS

LowChannelS21Response

HighChannelS21Response

S21IsolationResponse(inhigh
band)

S21 Isolation Response (in low


band)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 2 2011 1:40PM
D031-08690B

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

82

CM1015-DBPXBC-xxx

Filters

Diplex Filter for LTE800 and GSM900 with DC Auto Sense

Introduction:
The CM1015-DBPXBC is a high performance 790-862 MHz + 880-960 MHz
Crossband Combiner Diplexer intended for European LTE800 + E-GSM900
applications. Low loss, high isolation, high power handling, low IMD and
options for either DC-Auto Sense or Hard-Wired DC/AISG feedthrough, RF
Sniffer Port and integrated CILOC are all available.

Features:

50 dB Isolation, 0.35 dB maximum Insertion Loss

Power Handling 300 watts/3 kW PEP minimum per Channel

Low IMD -117 dBm (-160 dBc) maximum

DC-Auto Sense DC/AISG Feedthrough Option

Common Sniffer Port and Integrated CILOC Options

Hard Wired DC/AISG Feedthrough Options

ELECTRICAL SPECIFICATIONS
Frequency Range (MHz)
Insertion Loss
Return Loss
Rejection

Low Port, 790-862MHz

High Port, 880-960 MHz

0.35dB(0.15dBtypical)

0.35dB(0.15dBtypical)

20dB

20dB

50dB@880-960 MHz

50dB@790-862 MHz

Isolation (Channel to Channel)

50dB

Average Power Handling (RMS)

300 watts (+54) max.

Peak Power (dBm)

3 kW (+64 dBm) PEP maximum at 3000m, +65C and 2:1 antenna mismatch
-117 dBm (-160) in Rx band, two/+43 dBm carriers in the Tx band

Intermodulation Products (dBc)


DC Feedthrough Capacity

TMA Supply Voltage Fed Via RF Cable, +32V @ 2A max.

DC AISG Feedthru -001 (Single)/ -008 (Twin)

DC/AISG Auto-Sense from low or high channels (see logic table)

DC AISG Feedthru -002 (Single)/ -009 (Twin)

Option -001 + Sniffer Port -43 to -30 dB (790-862 and 880-960 MHz)

DC AISG Feedthru -003 (Single)/ -010 (Twin)

Option -002 + AISG Connector (internal CILOC compatible to AISG 1.1 & 2.0)

DC AISG Feedthru -004 (Single)/ -011 (Twin)

All ports are DC/AISG isolated no feedthru (no DC Auto-Sense function)

DC AISG Feedthru -005 (Single)/ -012 (Twin)

All ports are DC/AISG hard-wired connected to common port (no DC Auto-Sense)

DC AISG Feedthru -006 (Single)/ -013 (Twin)

Low frequency channel is hard-wired connected to common port (no DC Auto-Sense)

DC AISG Feedthru -007 (Single)/ -014 (Twin)

High frequency channel is hard-wired connected to common port (no DC Auto-Sense)

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Nov 2 2011 1:43PM
D031-08785B

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

83

CM1015-DBPXBC-xxx

Filters

MECHANICAL SPECIFICATIONS

DC/AISG FEEDTHROUGH/APPLICATION TABLE

RF Connectors

DIN 7/16 female, long neck

RF Sniffer Connector

N female (IP67 cap included)

AISG Connector

Per IEC-60130-9 (IP67 cap included)

Dimensions, HxwxD, mm(in)

Single: 240mm x 210mm x 83mm (9.4 x


8.3 x 3.3); Twin: 240mm x 210mm x
153mm (9.4 x 8.3 x 6)

Weight, with brackets, kg(lbs)

Single: 4.6 (10.1); Twin: 8.3 (18.3)

Housing Composition/Color

Aluminum/Off-White (NCS 1502-R)

Mounting Kit

Hose Clamps in Stainless Steel

DC Auto Sense Logic Table

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (F)

-40to +65(-40to +149)

Lightning Protection

According to IEC 61312-1, 8 kA 8/20


uS;center pin (any port)-shield

Ingress Protection

IP65/IP67 (IP rated cap must be used on


any unused ports)

Environmental

ETS 300 019

EMC

ETS 300 342-3

Safety

EN60950, UL 1950, ET

DC/AISG Function
Table by Model

Low Port (790-862


MHz)

High Port (880-960 AISG Port DC/AISG


MHz)
Connection

Tower Top
Capable

CM1015-DBPXBCxxx-001/-008

#1 Priority
Connection

#2 Priority
Connection

N/A

DC AutoSense&

Yes Common to
Low Port Only

CM1015-DBPXBCxxx-002/-009

#1 Priority
Connection

#2 Priority
Connection

N/A

DC AutoSense&

Yes Common to
Low Port Only

CM1015-DBPXBCxxx-003/-010

#2 Priority
Connection

#3 Priority
Connection

CM1015-DBPXBCxxx-004/-011

No Connection

No Connection

N/A

Hard-Wired

Yes

CM1015-DBPXBCxxx-005/-012

Connection

Connection

N/A

Hard-Wired

Yes

CM1015-DBPXBCxxx-006/-013

Connection

No Connection

N/A

Hard-Wired

Yes

CM1015-DBPXBCxxx-007/-014

No Connection

Connection

N/A

Hard-Wired

Yes

#1 Priority DC AutoConnection Sense&

No - BTS
location
only

NOTES
Installations must be grounded according to local and national codes. Do not
install or work on diplexers/filters near power lines. Install or work on
diplexers/filters or similar structures out of falling distance of all such lines.
Every electrical and telephone wire is potential dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened. Do not use tools.

RESPONSE PLOTS

LowChannelS21Response

S21IsolationResponse

CommonPortS22ReturnLoss

HighChannelS21Response

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Nov 2 2011 1:43PM
D031-08785B

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

84

POWERWAVE

Filters

010-11198-0002

850 MHz Rebanding Duplexer

ELECTRICAL SPECIFICATIONS*
Filter Type

850 MHz Rebanding Duplexer

Frequency Range

817-869

Antenna to Receive (RX) Port:


Passband

817-824

Passband Insertion Loss

1.0 dB maximum

Passband Loss Flatness

+/- 0.5 dB

Passband Return Loss

14 dB minimum

Rejection
DC - 650 MHz

70 dB minimum

650 - 680 MHz

85 dB minimum

680 - 750 MHz

70 dB minimum

780 - 790 MHz

40 dB minimum

862 - 869 MHz

80 dB minimum

869 - 2700 MHz

40 dB minimum

Transmit (Tx) to Antenna Port:


Passband

862-869

Passband Insertion Loss

1.6 dB maximum

Passband Loss Flatness

+/- 0.5 dB

Passband Return Loss

14 dB minimum

Rejection:
DC - 806 MHz

80 dB minimum

806 - 824 MHz

70 dB minimum

824 - 861.35 MHz

50 dB minimum

&861.50 MHz

30 dB minimum

&861.65 MHz

10 dB minimum

920 - 2700

40 dB minimum

Input Power Handling:


Average

100 watts minimum

Peak Instantaneous

11,000 watts minimum

MECHANICAL SPECIFICATIONS
Dimensions mm(in)

389.2 x 212 x 135 max (not inc. connectors or mtg brackets)

Weight lb(kg)

25.4 (11.52) maximum

CONNECTORS
Antenna

N-F

Transmit

N-F

Receive

SMA-F

Grounding Stud

Stainless M10x1.5 and hex nut for complete performance data

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature Range (Celsius)

0 C to +50 C

Operating Humidity

10-100%, non-condensing

Operating Altitude

Sea Level to 7500 feet (or equal barometric pressure)

D031-08639A Updated: Jan 5 2010 5:45PM

85

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

CM1000-AMPS-xxx

Filters

850 MHz Same Band Combiner, Type 1

TECHNICAL SPECIFICATIONS*
Filter Type

850 MHz Same Band Combiner, w/AISG and DC Transparency Type 1

Range (MHz)

824-894

Frequency Range (Full Band MHz)

Uplink, 824-849

Downlink, 869-894

Insertion Loss (dB)

4.2 dB maximum

0.6 dB maximum

Return Loss (dB)

18 dB minimum

18 dB minimum

Average Power Handling (dBm)

N/A

200 watts (+53.0)

Peak Power Handling (dBm)

N/A

1200 watts (+60.8) PEP maximum at 3000m, +65C and


2:1 antenna mismatch

Intermodulation (IM) (dBc) (Products Max)

-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

Isolation Between Ports

Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum

Common Port

TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1

AISG Mode

Per AISG 1.1, 2.0

AISG Control Signal Loss

1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz

Voltage Drop with 15W Power

1 V maximum @ 10-30VDC

Supply Voltage Handling

0-35VDC

Continuous Current Handling

5 A, 0-35VDC

DC Load

100 mA, +/-20 mA at GSM BTS Ports

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors

Weight kg(lbs)

8.15 (18)

Color

Off White (NCS 1502-R)

Housing

Aluminum, IP 67

RF Connectors

DIN 7/16 female

Mounting Kit - Rack Mount

19 Rack Mount Brackets (order P/N CM1000-AMPS-001)

Mounting Kit - Tower Mounting

Hose Clamps in Stainless Steel (order P/N CM1000-AMPS-002)

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40 C to +65 C (-40 to +149)

MTBF

1 Million Hours

Surge Protection

IEC 61312-1

Safety

EN 60950, UL 60950

Ingress Protection

IP67

Evironmental

ETS 300 019

EMC

3GPP: TS 25.113

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to
optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be
used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the
same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX
diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path
from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band


Combiner

D031-08700B Updated: Mar 23 2010 7:46AM

Tower Mounting Brackets Option Shown

86
86

Typical Application - GSM & UMTS Combining

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

CM1001-EGSM-xxx

Filters

GSM900 Same Band Combiner, Type 1

TECHNICAL SPECIFICATIONS*
Filter Type

GSM900 Same Band Combiner, w/AISG and DC Transparency Type 1

Range (MHz)

880-960

Frequency Range (Full Band MHz)

Uplink, 880-915

Downlink, 925-960

Insertion Loss (dB)

4.5 dB maximum

0.6 dB maximum

Return Loss (dB)

18 dB minimum

18 dB minimum

Average Power Handling (dBm)

N/A

200 watts (+53.0)

Peak Power Handling (dBm)

N/A

1200 watts (+60.8) PEP maximum at 3000m, +65C and


2:1 antenna mismatch

Intermodulation (IM) (dBc) (Products Max)

-115 dBm (-158 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

Isolation Between Ports

Systems Isolation (GSM-UMTS), Downlink, 36 dB minimum, Uplink, 18 dB minimum

Common Port

TMA DC Voltage & Control - BTS2 Main to ANT2 & BTS2 DIV to ANT1

AISG Mode

Per AISG 1.1, 2.0

AISG Control Signal Loss

1 dB maximum @ 2.176 MHz, 2 dB maximum @ 11 MHz

Voltage Drop with 15W Power

1 V maximum @ 10-30VDC

Supply Voltage Handling

0-35VDC

Continuous Current Handling

5 A, 0-35VDC

DC Load

100 mA, +/-20 mA at GSM BTS Ports

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

437.8 x 228 x 61.4 (17.24x 8.98x 2.42) - Excluding Rack/Mast Brackets & Connectors

Weight kg(lbs)

8.15 (18)

Color

Off White (NCS 1502-R)

Housing

Aluminum, IP 67

RF Connectors

DIN 7/16 female

Mounting Kit - Rack Mount

19 Rack Mount Brackets (order P/N CM1001-EGSM-001)

Mounting Kit - Tower Mounting

Hose Clamps in Stainless Steel (order P/N CM1001-EGSM-002)

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40 C to +65 C (-40 to +149)

MTBF

1 Million Hours

Surge Protection

IEC 61312-1

Safety

EN 60950, UL 60950

Ingress Protection

IP67

Evironmental

ETS 300 019

EMC

3GPP: TS 25.113

The SAME BAND COMBINER products are intended to install either indoors in rack cabinets or on walls, or outdoors on towers or walls close to the Base Transceiver Stations. The main design criteria have been to
optimize electrical performance and to make easy installation for different locations. There are two mounting bracket options available either for a cabinet or outdoor installation. The Same Band Combiners can be
used for a variety of dual-technology combining on common antennas, such as TDMA + GSM, GSM + UMTS, GSM + LTE, UMTS + LTE or IS95 CDMA + 1X/3X EVDO. The product combines technology 1 and 2 to the
same antenna lines. Technology 1 BTS TX carriers and RX main path are connected to the 1st antenna line and technology 2 BTS TX and RX main feeds are connected to 2nd antenna line. Technology 1 BTS RX
diversity is connected from 2nd antenna line and technology 2 BTS RX diversity is fed from the 1st antenna line. In addition, the product provides AISG carrier signal (AC bandwidth to 11 MHz) and DC-power path
from the diversity port BTS2 to the 1st antenna line and from main BTS2 port to the 2nd antenna line.

Block Diagram - Type 1 Same Band


Combiner

D031-08701B Updated: Mar 23 2010 7:46AM

Tower Mounting Brackets Option Shown

87

Typical Application - GSM & UMTS Combining

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP145nn

Filters

Diplex Filter for 1800/UMTS with Configurable DC


Transparency

TECHNICAL SPECIFICATIONS
Filter Type

Diplexer for 1800/2100

Range (MHz)

1710-2170

Frequency Range (Full Band MHz)

1710-1880 MHz/1920-2170

Frequency Range (MHz)


Insertion Loss (dB)

1800 Port, 1710-1880

UMTS Port, 1920-2170

0.3 dB maximum (Rx), 0.6 dB maximum (Tx)

0.5 dB maximum (Rx), 0.3 dB maximum (Tx)

Return Loss (dB)


Rejection

18 dB minimum

18 dB minimum

74 dB min. 1920-1980 MHz & 59 dB min. 2110-2170 MHz

60 dB min. 1710-1880 MHz

Average Power Handling (dBm)

240 watts (+53.8) minimum

80 watts (+49) minimum

Peak Power (dBm)

1440 watts (+61) minimum

1600 watts (+62) minimum

Intermodulation (IM)(dBc)(Products, Max)

-118 dBm (-161) maximum in Rx band, two/+43 dBm carriers in the Tx band

Common+Port
DC Bias/AISG Passthru (single):

TMA supply voltage, fed via the RF cable, +/-58.5 V maximum, 2 A


-01: DC/AISG to issue 2.0
-02: DC/AISG to issue 2.0
(UMTS Port to Antenna Port) (1800 Port to Antenna Port)

-03: DC/AISG to issue 2.0


(connected all ports)

-04: No Connection
(DC Grounded)

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

180 x 162 x 61 (7x 6x 2)

Weight kg(lbs)

3.6 (7.9)

Volume

N/A

Color

Off White (NCS 1502-R)

Housing

Aluminum

RF Connectors

DIN 7/16 female

Mounting Kit

Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40to +65(-40to +149)

MTBF

10 Million Hours

Lightning Protection

3 kA 10/350 us; center pin (any port) to shield and 50 kA 10/350 us; shield-shield (Pulse forms per
IEC61312-1)

Safety

EN60 950

Ingress Protection

IP65, EN 60 529

Environmental

ETS 300 019

EMC

N/A

D031-08227A Updated: Mar 18 2010 11:36AM

88

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP146nn

Filters

1900 MHz Duplex filter Outdoor with DC Bypass

TECHNICAL SPECIFICATIONS
Filter Type

Duplex Filter 1900

Range (MHz)

1850-1990

Frequency Range (Full Band MHz)

1850-1910 MHz/1930-1990 MHz

Frequency Range (MHz)

RECEIVE,1850-1910

TRANSMIT, 1930-1990

Insertion Loss (dB)

0.6 dB maximum (Rx)

0.5 dB maximum (Tx)

Return Loss (dB)


Rejection

18 dB minimum

18 dB minumum

40 dB minimum; 1930-1990 MHz

40 dB minimum; 1850-1910 MHz

Average Power Handling (dBm)

N/A

200 watts (+53) minimum

Peak Power (dBm)

N/A

TRANSMIT, 1000W (+60 dBm) minimum

Intermodulation (IM)(dBc)(Products, Max)

-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band

Common+Port
DC Bias/AISG Passthru (single):

TMA supply voltage, fed via the RF cable, +31 V maximum, 1.1 A
-01: DC/AISG to issue 2.0 (Rx
Port to Antenna Port)

N/A

N/A

N/A

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

163 x 181 x 65 (6x 7x 3)

Weight kg(lbs)

3.3 (7.3) maximum

Volume

N/A

Color

Off White (NCS 1502-R)

Housing

Aluminum

RF Connectors

DIN 7/16 female

Mounting Kit

Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40to +65(-40to +149)

MTBF

10 Million Hours

Lightning Protection

IEC 61312-1

Safety

EN 60 950, UL 1950

Ingress Protection

IP65, EN 60 529

Environmental

ETS 300 019

EMC

N/A

D031-08691A Updated: Jan 5 2010 5:45PM

89

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP141nn

Filters

Triplex Filter for 900, 1800 MHz and UMTS with DC


Transparency

TECHNICAL SPECIFICATIONS
Range (MHz)

880-2170

Frequency Range (Full Band MHz)

900 Port, 880-960

1800 Port, 1710-1880

Peak Power (dBm)

1600 W (+62) PEP

1600 W (+62) PEP

Insertion Loss (dB)

Average Power Handling (dBm)


Intermodulation (IM) (dBc) (Products, Max)

1600 W (+62) PEP

0.1 dB typical (0.2 dB max.) 0.1 dB typical (0.3 dB max.


Rx, 0.6 dB max. Tx)

Return Loss (dB)

UMTS Port, 1920-2170


0.1 dB typical (0.5 dB max. Rx, 0.3 dB max. Tx)

20 dB minimum

20 dB minimum

20 dB minimum

350 W (+55) max.

350 W (+55) max.

350 W (+55) max.

3rd Order: -100 dBm; 5th


3rd Order: -100 dBm; 5th -116 dBm (Rx band products w/2x43 dBm in Tx band)
Order: -116 dBm (Rx band Order: -116 dBm (Rx band
products w/2x43 dBm in Tx products w/2x43 dBm in Tx
band)
band)

Isolation Between Ports

Rejection Between Ports (except common), >50 dB

Coupled Ports

N/A

Common+Port

TMA supply voltage, fed via the RF cable, +/-32 V maximum, 2 A

DC Bias/AISG Passthru -06 (single)

-06: No Connection (DC Grounded)

DC Bias/AISG Passthru -07 (single)

-07: DC/AISG to issue 2.0 (connected all ports)

DC Bias/AISG Passthru -08 (single)

-08: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)

DC Bias/AISG Passthru -09 (single)

-09: DC/AISG to issue 2.0 (connected to UMTS port)

DC Bias/AISG Passthru -10 (single)

-10: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)

DC Bias/AISG Passthru -11 (twin)

-11: No Connection (DC Grounded)

DC Bias/AISG Passthru -12 (twin)

-12: DC/AISG to issue 2.0 (connected all ports)

DC Bias/AISG Passthru -13 (twin)

-13: DC/AISG to issue 2.0 (connected to 1800 & UMTS ports)

DC Bias/AISG Passthru -14 (twin)

-14: DC/AISG to issue 2.0 (connected to UMTS port)

DC Bias/AISG Passthru -15 (twin)

-15: DC/AISG to issue 2.0 (connected to 900 & UMTS ports)

MECHANICAL SPECIFICATIONS
Dimensions mm(in)

169 x 228 x 69.7 (6.65x 8.98x 2.75)

Weight kg(lbs)

<3.0 (6.5)

Color

Off White (NCS 1502-R)

Housing

Aluminum, IP 65 (Optional IP 68)

RF Connectors

DIN 7/16 female

Coupled Port Connector

N/A

AISG Connector

N/A

Mounting Kit

Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS
Temperature Range Celsius (Fahrenheit)

-40 C to +65 C (-40 to +149)

MTBF

4 Million Hours

Safety

EN 60 950, UL 60 950, ETL

Ingress Protection

IP65, EN 60 529

Environmental

ETS 300 019

D031-08652D Updated: Oct 10 2011 8:43AM

90

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Filters

LGP195nn

Co-Location Filter GSM900

TECHNICAL SPECIFICATIONS*
Filter Type

Co-Location Filter GSM900

Frequency Range (MHz)

890-960

Rx Passband Frequency Range (MHz)

-01: 890-915 MHz

-02: 890-915 MHz

-03: 896-915 MHz

Tx Passband Frequency Range (MHz)

-01: 935-960 MHz

-02: 935-960 MHz

-03: 941-960 MHz

Rx Passband Insertion Loss

-01: <1.5 dB (<3.5 dB 890-892 MHz) -02: <1.0 dB (<1.8 dB 890-892 MHz) -03: <1.5 dB (< 3.5 dB 896-898 MHz)

Tx Passband Insertion Loss

< 0.5 dB
Uplink:17dBDownlink:18dB

Passband Return Loss


Rejection

-01: > 30 dB 869 to 889 MHz

Passband Power Handling (dBm)

-02: > 37 dB 869 to 888 MHz

-03: > 30 dB 869 to 895 MHz

200 watts (+53) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)

Passband Peak Power Handling

1585 watts (+62) minimum, 935 to 960 MHz (-01 & -02), 941 to 960 MHz (-03)

Intermodulation IM dBc Products Max

-110 dBm (-153 dBc) maximum in Rx band, two/+43 dBm carriers in the Tx band

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

169 x 228 x 68 (7x 9x 2)

Weight kg(lbs)

3.8 (8.4) maximum

Color

Off White (NCS 1502-R)

Housing

Aluminum, Powder Coated

RF Connectors

DIN 7/16 female

Mounting Kit

Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-5 to +55 (23 to +131 )

Operating Humidity Range

0 to +95% Relative Humidity

MTBF

>10 Million Hours

Ingress Protection

IP65

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08692B Updated: Oct 24 2011 10:52AM

91

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LGP219nn

Filters

Diplex Filter for 800/900 MHz and 1800/1900/2100 MHz with


Configurable DC Transparency

TECHNICAL SPECIFICATIONS
Filter Type

Diplex Filter for 800/900 MHz and 1800/1900/2100

Range (MHz)

824-2170

Frequency Range (Full Band MHz)


Frequency Range (MHz)

824-960 MHz/1710-2170 MHz


824-960 Port, 824-960 MHz

1710-2100 Port, 1710-2170 MHz

Insertion Loss (dB)

<0.1 dB Typical

<0.2 dB Typical

Return Loss (dB)

20 dB minimum

20 dB minimum

Rejection

50 dB minimum; 1710-2170 MHz

50 dB minimum; 824-960 MHz

Average Power Handling (dBm)

850 MHz: 500 watts (+57); 900 MHz: 350 watts


(+55) max.

350 watts (+55) max.

Peak Power (dBm)

850 MHz: 5 kW (+67) PEP; GSM: 2.8kW (+64.5)


PEP

DCS/UMTS: 2.8 kW (+64.5) PEP; PCS: 5 kW (+67) PEP

Intermodulation (IM)(dBc)(Products, Max)

-110 dBm (-153) maximum in Rx band, two/+43 dBm carriers in the Tx band

Common+Port

TMA supply voltage, fed via the RF cable, +/-31 V maximum, 2 A

DC Bias/AISG Passthru (single):

-01: No Connection
(DC Grounded)

-02: DC/AISG to issue 2.0


(connected all ports)

-03: DC/AISG to issue 2.0


(1710-2100 Port to Antenna
Port)

-04: DC/AISG to issue 2.0


(824-960 Port to Antenna
Port)

DC Bias/AISG Passthru (twin):

-05: No Connection
(DC Grounded)

-06: DC/AISG to issue 2.0


(connected all ports)

-07: DC/AISG to issue 2.0


(1710-2100 Port to Antenna
Port)

-08: DC/AISG to issue 2.0


(824-960 Port to Antenna
Port)

MECHANICAL SPECIFICATIONS*
Dimensions mm(in)

112 x 158 x 74 (4x 6x 3)

Weight kg(lbs)

2.5 (5.5) maximum

Volume

1.3 liter single unit

Color

Off White (NCS 1502-R)

Housing

Aluminum

RF Connectors

DIN 7/16 female

Mounting Kit

Hose Clamps in Stainless Steel

ENVIRONMENTAL SPECIFICATIONS*
Temperature Range Celsius (Fahrenheit)

-40to +65(-40to +149)

MTBF

5 Million Hours

Lightning Protection

According to IEC 61312-1, 3kA 10/350 uS;center pin (any port)-shield

Safety

EN 60 950, UL 1950, ETL

Ingress Protection

IP65, EN 60 529

Environmental

ETS 300 019

EMC

ETS 300 342-3

D031-08693C Updated: Oct 10 2011 8:51AM

92

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Rapid Mobile Deployment


and Enclosure Solutions

Powerwaves innovative outdoor enclosure and mobile


platform solutions offer flexible combinations of density and
serviceability through state of the art modular design and
construction. Network operators around the world have
made Powerwaves enclosure and mobile platforms their
premier choice for housing and deploying critical network
infrastructure equipment.

MicroFlex Outdoor
Enclosures
RapidFlex Outdoor
Enclosures
SubTerra Controlled
Environment Vault
VersaFlex Shelter
Solutions

RMDU and Enclosure Solutions

POWERWAVE

Rapid Mobile Deployment and Enclosure Solutions

Page

MicroFlex Outdoor Enclosures

95

RapidFlex Mobile Deployment Unit

98

SubTerra Controlled Environment Vault

100

VersaFlex Shelter Solutions

102

94

RMDU and Enclosures Solutions

POWERWAVE

MicroFlex Outdoor Enclosures

Rapid Mobile Deployment and Enclosure Solutions


MicroFlex Outdoor Enclosures

Title

Part Number

Page

MicroFlex Low-Profile Enclosure for


Backhaul and E911 Applications

MF0-004-000-002

96

MicroFlex 48RU Outdoor Enclosure

MF0-048-000-001

97

95

POWERWAVE

MF0-004-000-002

Electronic Equipment Enclosures

MicroFlex Low-Profile Enclosure for Backhaul and E911


Applications

Powerwaves Microflex outdoor enclosure provides 4RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order
with interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength

High Strength Corrosion Resistant Aluminum Construction

Finish

TGIC Powdercoat, Color RAL 7035

WEIGHTS & MEASURES


Dimensions mm(in)

914 x 685 x 254 (36 x 27 x 10)

Weight kg(lbs)

40 (88) (baseline configuration)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature

-10C to 50C

Wind m/s(mph)

67 (150)

Audible Noise (db-A)

57.0 (not including installed equipment)

Thermal Electric Cooling Power

200W (calculated 190W @ dT = 0 degree C +/- 10%)

COMPLIANCE
GR487 CORE
UL50
CE
RoHS
IP55

Updated: Jul 21 2010 11:48AM

96

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

MF0-048-000-001

Electronic Equipment Enclosures

MicroFlex 48RU Outdoor Enclosure

Powerwaves Microflex outdoor enclosure provides 48RU of rack space in a compact foot print. The complete Microflex enclosure product line is configured to order
with interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength

High Strength Corrosion Resistant Aluminum Construction

Finish

TGIC Powdercoat, Color RAL 7035

WEIGHTS & MEASURES


Dimensions mm(in)

2400mm H x 1755mm W x 817mm D (94.5in H x 70.0in W x 32.0in D)

Weight kg(lbs)

436 kg ( 961lbs) (Cabinet only, no equipment)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature

-50C to 70C (Internal temperature is dependant on equipment heat load and thermal management
options)

Wind m/s(mph)

67 (150)

Audible Noise (db-A)

57.0 to 65 (depending on thermal management)

COMPLIANCE
GR487 CORE (Pending)
UL50
CE
RoHS
IP55

Updated: Nov 1 2011 5:28PM

97

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

RapidFlex Mobile Deployment Unit

Rapid Mobile Deployment and Enclosure Solutions


RapidFlex Mobile Deployment Unit

Title
RapidFlex Mobile Deployment Unit

Part Number

Page

CW0-000-000-003

99

98

POWERWAVE

CW0-000-000-003

RapidFlex

RapidFlex Mobile Deployment Unit (RMDU)

GENERAL SPECIFICATIONS
Axle: Quantity

Dual Tandem HD

Axle: Type

Straight

Brakes

Electric

Suspension

Leaf

Wheel Bolt Pattern


Safety Chains

Yes

12V Trailer End Connector

7-Way

Coax Real

Up to (12) 1/2 Coax or (6) 7/8 Coax + 1 flexible conduit

Diesel Generator, Weather Proof Sound Attenuated


Enclosure

50kW Diesel with extended run time fuel tank

7-Bay Telecommunications Shelter

Yes

Hydraulic Auto Leveling

Yes

Micro Footprint, Hydraulic Powered Outriggers

Yes

WEIGHTS & MEASURES


Trailor Width

76

Trailor Length

34

Travel Length

36

Overall Width

76

Overall Height

13 6

Platform Height

24

Tire Size/Type

235-75R17.5

Hitch Ball Size

Gooseneck 2 5/16

Hitch Weight (lbs)

3,000

Curb Weight (lbs)

22,000

GVWR (lbs)

30,000

GAWR (lbs)

15,000

Average Payload Capacity (lbs)

8,000

Tower Height (ft)

102 Rad Center

Maximum Tower Loading (lbs)

650

ACCESSORIES INCLUDED
Full-size spare tire
Safety pull-away chains
Sealed beam DOT lighting package and reflective
striping (complies w/ DOT Federal Motor Carrier
safety regulations in all 50 states)
7-way electrical hook-up
Operation and maintenance manuals
Lockable tool box
Automatic Transfer Switch
Extended Run Double Wall Fuel Tank
3-way antenna mount
Wireless Platform Access and Control
ADDITIONAL OPTIONS AVAILABLE
FAA aviation obstruction lighting kit
Wind Speed Anemometer
Self-Guy Kit

*All dimensions are nominal and specifications are subject to change without notice.

Updated: Nov 7 2011 5:39PM

99

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

SubTerra Controlled Environment Vault

Rapid Mobile Deployment and Enclosure Solutions


SubTerra Controlled Environment Vault

Title

Part Number

Page

SubTerra Controlled Environment Vault

CEV-000-000-001

101

100

POWERWAVE

CEV-000-000-001

Electronic Equipment Enclosures

SubTerra Controlled Environment Vault

Powerwaves Controlled Environment Vault provides 184RU of rack space in a compact foot print. The complete CEV product line is configured to order with
interchangeable options and accessories.
GENERAL SPECIFICATIONS
Material High Strength

Fiberglass and High Strength Corrosion Resistant Aluminum Construction

Finish

Brushed Aluminum

WEIGHTS & MEASURES


Dimensions mm(in)

3860 x 1955 x 3505 (152 x 77 x 138)

Weight kg(lbs)

3401 (7500) (baseline configuration)

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature

-40C to 60C (Internal temperature is dependant on equipment heat load and thermal management
options)

Wind m/s(mph)

67 (150)

Audible Noise (db-A)

57.0 to 65 (depending on thermal management options)

COMPLIANCE
Designed to GR487 CORE
UL Listed
CE
RoHS
Designed to IP55

Updated: Dec 9 2010 2:04PM

101

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

RMDU and Enclosures Solutions

POWERWAVE

VersaFlex Shelter Solutions

Rapid Mobile Deployment and Enclosure Solutions


VersaFlex Shelter Solutions

Title

Dimensions (ft)

Weight (lbs)

Page

VersaFlex 7.0 High-Cube Outdoor Shelter

2591 x 3048 x 2286 mm (102 x 120 x 90)

1590 (3500)

103

VersaFlex 9.0 High-Cube Outdoor Shelter

2591 x 4191 x 2286 mm (102 x 165 x 90)

1814 (4000)

104

102

POWERWAVE

VersaFlex

VersaFlex (7 Bay)

VersaFlex Enclosure Solutions

SPECIFICATIONS
Length ft(m)

10 (3.05)

Width ft(m)

76 (2.29)

Height in(m)

86: (2.59)

Weight lbs(kg)

4000 (1814)

HVAC

2x3 Ton

Radio Frames

Minimum Lease Required

10L x 76W = 75 Sq. Ft. (3.05L x 2.29W = 6.98m2)

Note: Weights and lengths are approximate measurements and will vary based on customer requirements.
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Key Features/Benefits:

Utilizes approximately half the space of


traditional Shelters.

Standard weighs only 4,000 lbs (1814 kg) vs.


the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.

Internal sub-floor HVAC system that


eliminates hot spots.

Sliding door design reduces lease area


requirements by eliminating door swing.

Sliding equipment racks that reduce floor


space required and utilizes a rolling cable
tray

VersaFlex (7 Bay) Enclosure

D031-08439 Rev. D 07/08 Updated: Jul 21 2010


6:12PM

103

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

VersaFlex

VersaFlex (9 Bay)

VersaFlex Enclosure Solutions

SPECIFICATIONS
Length ft(m)

139 (4.19)

Width ft(m)

76 (2.29)

Height in(m)

86: (2.59)

Weight lbs(kg)

4750 (2155)

HVAC

2x5 Ton

Radio Frames

Minimum Lease Required

139L x 76W = 103.1 Sq. Ft (4.19L x 2.29W = 9.60m2)

Note: Weights and lengths are approximate measurements and will vary based on customer requirements.
All specifications are subject to change without notice. Please contact your Powerwave representative for complete performance data.

Key Features/Benefits:

Utilizes approximately half the space of


traditional Shelters.

Standard weighs only 4,000 lbs (1814 kg) vs.


the 30,000 (13608 kg) to 50,000 lbs (22680
kg) of traditional shelters.

Internal sub-floor HVAC system that


eliminates hot spots.

Sliding door design reduces lease area


requirements by eliminating door swing.

Sliding equipment racks that reduce floor


space required and utilizes a rolling cable
tray

VersaFlex (9 Bay) Enclosure

D031-08439 Rev. D 07/08 Updated: Jul 21 2010


6:12PM

104

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Coverage Products

Powerwaves Coverage products include turn- key


coverage and capacity products and solutions that give
network operators, facilities owners and neutral hosts an
edge over the competition. We specialize in innovative
products and solutions from the simplest to the most
challenging indoor and outdoor environments that help
improve coverage, signal quality and capacity. Our efficient,
modular and integrated solutions drive down capital and
operating expenses.

105

Repeater Products
In-Building and Outdoor
DAS Products
Repeater Remote
Management Products

Coverage Products

POWERWAVE

Coverage Products

Repeater Products

Page

Channel Selective Standard Repeaters

108

Band Selective Compact Repeaters

138

Band Selective Standard Repeaters

170

Advanced Train Repeaters

185

Digital Repeaters

190

In-Building and Outdoor DAS Products, Repeater Products

Page

Bi-Directional Amplifiers

203

Fiber Optic DAS Master Unit

206

LinkNet Convergence Platform

208

Tap-In Signal Taps

216

Nexus FT - Public Safety

218

In-Building and Outdoor DAS Products, DAS Products

Page

Wide Band Radio Heads

220

Nexus FT Single and Dual Band

223

Nexus FT Rack Mounts

259

Repeater Remote Management

Page

Base Station Management Interface

265

IP/SNMP/GPS Repeater Remote Management Interface

267

106

Power wave

Repeater Products

Repeater products provide cost-effective coverage solutions


for airports, railway stations, tunnels, convention centers,
canyons and other environments where structures or
natural obstructions interfere with signals. What sets
Powerwave repeater products apart is our exceptionally
low total lifetime cost. This is due to a number of factors.
Our high level of integration delivers a compact form factor
that eliminates/minimizes site rental costs. With support
for 2G/3G/4G technologies, Powerwave provides a futureproof solution.

Channel Selective
Standard Repeaters
Band Selective
Compact Repeaters
Band Selective
Standard Repeaters
Advanced Train Repeaters
Digital Repeaters

Coverage Products

POWERWAVE

Channel Selective Standard Repeaters

Repeater Products

Title
Range (MHz)
Upgrade Standard
Channel Selective,1800 GSM
MHz
Upgrade Standard
Channel Selective,2100 GSM
MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
GSM-R
Selective Repeater
900MHz
Standard Channel
GSM-R
Selective Repeater
900MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
GSM-R
Selective Repeater
900MHz
Standard Channel
GSM-R
Selective Repeater
900MHz
Standard Channel
Selective Repeater
GSM-R
900MHz
Standard Channel
Selective Repeater
EGSM
900MHz
Standard Channel
EGSM
Selective Repeater
900MHz

No. of Channels

Bandwidth

Part Number

200 KHz/channel

AR0027/50409

110

200 KHz/channel

AR0065/00109

111

200 KHz/channel

AR1700/80208

112

200 KHz/channel

AR1700/80209

113

200 KHz/channel

AR1700/80218

114

200 KHz/channel

AR1700/80219

115

200 KHz/channel

AR1700/80229

116

200 KHz/channel

AR1700/80408

117

200 KHz/channel

AR1700/80409

118

200 KHz/channel

AR1700/80418

119

200 KHz/channel

AR1700/80419

120

200 KHz/channel

AR1700/80429

121

200 KHz/channel

AR1700/90209

122

200 KHz/channel

AR1700/90409

123

108

Page

Coverage Products

POWERWAVE

Channel Selective Standard Repeaters

Repeater Products

Title

Range (MHz)

Standard Channel
Selective, 900 MHz

EGSM

Standard Channel
Selective, 900 MHz

Bandwidth

Part Number

200 KHz/channel

AR1700/90419

124

GSM

200 KHz/channel

AR1717/90609

125

Standard Channel
Selective, 1800 MHz

GSM

200 KHz/channel

AR2700/50209

126

Standard Channel
Selective, 1800 MHz

GSM

200 KHz/channel

AR2700/50409

127

Standard Channel
Selective, 1800 MHz

GSM

200 KHz/channel

AR2727/50609

128

Standard Channel
Selective, 1900 MHz

GSM

200 KHz/channel

AR3700/50409

129

Standard Channel
Selective, 2100 MHz

WCDMA

4.4 MHz/channel

AR6500/00109

130

WCDMA2100

4.4 MHz/channel

AR6512/00229

131

WCDMA2100

4.4 MHz/channel

AR6512/00239

132

WCDMA2100

4.4 MHz/channel

AR6517/01429

133

Standard Channel
Selective, 2100 MHz

WCDMA2100

200 KHz/channel

AR6517/01439

134

Standard Channel
Selective, 2100 MHz

WCDMA2100

200 KHz/channel

AR6517/01459

135

Dual Band Channel


Selective 2100/1800

WCDMA2100

1 to 2

4.4 MHz/channel

AR6522/01109

136

Standard Channel
Selective, 2100 MHz

WCDMA2100

4.4 MHz/channel

AR6560/00209

137

Standard Repeater
Dual Band Channel
Selective, 2100MHz
Standard Dual Band
Channel Selective,
2100MHz
Standard Dual Band
Channel Selective,
2100MHz

No. of Channels

109

Page

POWERWAVE

AR0027/50409

Channel Selective Standard Repeaters

Upgrade Standard Repeater Channel Selective 1800MHz GSM,


4CH, Stand Alone, Seperated Donor/Service

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

N/A

GSM1800

Frequency Band UL (MHz)

N/A

1710-1785

Frequency Band DL (MHz)

N/A

1805-1880

No. of Channels

N/A

Bandwidth (MHz)

N/A

200 KHz/channel

Output Power DL

N/A

+28 dBm/channel

Output Power UL

N/A

+28 dBm/channel

Gain adjustment range

N/A

55 to 90 dB

Noise Figure

N/A

4 dB

Group Delay

N/A

6 s

Section

Bottom Section

Door Section

Power Supply

N/A

115/230 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

N/A

250 W

Section

Bottom Section

Door Section

Type

N/A

N/A

Wireless MOD EM Frequencies

N/A

N/A

Packet Data Mode

N/A

N/A

Fallback Circuit Switched Mode

N/A

N/A

Northbound Traffic

N/A

N/A

Maintenance

N/A

N/A

Remote Management

N/A

N/A

Section

Bottom Section

Door Section

RF Connection

N/A

N-female

Dimension (HxWxD)mm(ft)

N/A

440 x 530 x 195 (15x19x8)

Weight kg(lbs)

N/A

22 (48)

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

N/A

-13 to +131 (-25 to +55)

Housing Specification

N/A

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

N/A

TS 45.005

Regulatory Compliance EMC

N/A

EN 301 489-1

ACCR
EVM
TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*

MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

*Stand alone

Updated: Dec 8 2010 2:15PM

110

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR0065/00109

Channel Selective Standard Repeaters

UPGRADE STANDARD REPEATER CHANNEL SELECTIVE


2100MHz WCDMA, 2CH, STAND ALONE, SEPARATE DONOR
AND SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

N/A

WCDMA 2100

Frequency Band UL (MHz)

N/A

1920 -1980

Frequency Band DL (MHz)

N/A

2110 - 2170

No. of Channels

N/A

Bandwidth (MHz)

N/A

4.4 channel

Output Power DL

N/A

1ch +30 dBm/channel, 2ch +25 dBm/channel

Output Power UL

N/A

1ch +20 dBm/channel, 2ch +15 dBm/channel

Gain adjustment range

N/A

55 to 85 dB

Noise Figure

N/A

DL 6 dBUL 4 dB

Group Delay

N/A

6 s

ACCR

N/A

EVM

N/A

TECHNICAL SPECIFICATIONS*
Section

Bottom Section

Door Section

Power Supply

N/A

115/230 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

N/A

160 W

Section

Bottom Section

Door Section

Type

N/A

N/A

Wireless MOD EM Frequencies

N/A

N/A

Packet Data Mode

N/A

N/A

Fallback Circuit Switched Mode

N/A

N/A

Northbound Traffic

N/A

N/A

Maintenance

N/A

N/A

Remote Management

N/A

N/A

Section

Bottom Section

Door Section

RF Connection

N/A

N-female

Dimension (HxWxD)mm(ft)

N/A

440 x 530 x 121 (15x19x4.8)

Weight kg(lbs)

N/A

19 (42)

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

N/A

-13 to +131 (-25 to +55)

Housing Specification

N/A

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

N/A

TS 125 106

Regulatory Compliance EMC

N/A

TS 125 113

REMOTE CONTROL*

MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

*Stand alone

Updated: May 19 2011 2:12PM

111

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80208

Standard Channel Selective Repeater 900MHz GSM-R, 2CH,


FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND
KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

max +33dBm/channel at fiber optical interface input

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

2ch: 160W

REMOTE CONTROL*
Type

Remote control via optical link master unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.7 and greater

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:40AM

Note: Values within [ ] is valid for a max configuration

112

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80209

Standard Channel Selective Repeater 900MHz GSM-R, 2CH, AC


PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK
AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

+33 dBm/channel

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

2ch: 160W

REMOTE CONTROL*
Type

IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 GSM-R

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM-R

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.7 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:42AM

Note: Values within [ ] is valid for a max configuration

113

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80218

Standard Channel Selective Repeater 900MHz GSM-R, 2CH,


FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16
CON, DOOR SWITCH, LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

max +33dBm/channel at fiber optical interface input

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC, two AC power supplies for redundancy

Power Supply (Optional)

NA

Power Consumption

2ch: 160W

REMOTE CONTROL*
Type

Remote control via optical link master unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.7 and greater

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

< 39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:44AM

Note: Values within [ ] is valid for a max configuration

114

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80219

Standard Channel Selective Repeater 900MHz GSM-R, 2CH,


WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R
WIRELESS REMOTE CONTROL, LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

+33 dBm/channel

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC, two AC power supplies for redundancy

Power Supply (Optional)

NA

Power Consumption

2ch: 160W

REMOTE CONTROL*
Type

IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 GSM-R

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM-R

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.7 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 [86]

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:51AM

Note: Values within [ ] is valid for a max configuration

115

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80229

Standard Channel Selective, 900MHz GSM-R, 2CH, DC PSU,


7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL,
LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

+33 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

21-60 VDC

Power Supply (Optional)

NA

Power Consumption

2ch: 160W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:54AM

Note: Values within [ ] is valid for a max configuration

116

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80408

Standard Channel Selective Repeater 900MHz GSM-R, 4CH,


FIBER FED, AC PSU, 7/16 CON, DOOR SWITCH, LOCK AND
KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

max +29dBm/channel at fiber optical interface input

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

Remote control via optical link master unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.7 and greater

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:57AM

Note: Values within [ ] is valid for a max configuration

117

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80409

Standard Channel Selective Repeater 900MHz GSM-R, 4CH, AC


PSU, 7/16 CON, GSM-R WIRELESS REMOTE CONTROL, LOCK
AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

+29 dBm/channel

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 GSM-R

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM-R

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.7 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 11:58AM

Note: Values within [ ] is valid for a max configuration

118

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80418

Standard Channel Selective Repeater 900MHz GSM-R, 4CH,


FIBER FED, WITH REDUNDANCY FUNCTION, AC PSU, 7/16
CON, DOOR SWITCH, LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

max +29dBm/channel at fiber optical interface input

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC, two AC power supplies for redundancy

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

Remote control via optical link master unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.7 and greater

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:02PM

Note: Values within [ ] is valid for a max configuration

119

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80419

Standard Channel Selective Repeater 900MHz GSM-R, 4CH,


WITH REDUNDANCY FUNCTION, AC PSU, 7/16 CON, GSM-R
WIRELESS REMOTE CONTROL, LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

+29 dBm/channel

Gain adjustment range

55 to 90 dB (DL/UL)

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC, two AC power supplies for redundancy

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

IP/SNMP: 900 GSM-R Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 GSM-R

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM-R

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.7 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1, EN50121-1: 2000, EN 50121 part 4.

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:04PM

Note: Values within [ ] is valid for a max configuration

120

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/80429

Standard Channel Selective, 900MHz GSM-R, 4CH, DC PSU,


7/16 CON, GSM 900/1800MHz CS/PS REMOTE CONTROL,
LOCK AND KEYS

ELECTRICAL DATA*
Range

GSM-R

Frequency Band UL (MHz)

876-880

Frequency Band DL (MHz)

921-925

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

+29 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

5 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

21-60 VDC

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, ETS 300 609-4. Safety: UL, EN 60950. Environment : ETS 300 019, EN 50125. Railway
installations: EN 50122

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:07PM

Note: Values within [ ] is valid for a max configuration

121

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90209

STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM,


2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

EGSM

Frequency Band UL (MHz)

880-915

Frequency Band DL (MHz)

925-960

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+33 dBm/channel

Output Power UL (min)

+33 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

160W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:09PM

Note: Values within [ ] is valid for a max configuration

122

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90409

STANDARD CH SEL REPEATER 900MHz EGSM, 4CH,


GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

EGSM

Frequency Band UL (MHz)

880-915

Frequency Band DL (MHz)

925-960

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

+29 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

250W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

>26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:10PM

Note: Values within [ ] is valid for a max configuration

123

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1700/90419

STANDARD CH SEL REPEATER 900MHz EGSM,4CH,AC


PSU,7/16 CON,GSM/GPRS REMOTE CONTROL,DOOR
SW,LOCK-KEYS

ELECTRICAL DATA*
Range

EGSM

Frequency Band UL (MHz)

880-915

Frequency Band DL (MHz)

925-960

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+29 dBm/channel

Output Power UL (min)

+29 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

250W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

7/16-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:12PM

Note: Values within [ ] is valid for a max configuration

124

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR1717/90609

STANDARD CHANNEL SELECTIVE REPEATER 900MHz EGSM,


6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

EGSM

Frequency Band UL (MHz)

880-915

Frequency Band DL (MHz)

925-960

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+26 dBm/channel

Output Power UL (min)

+26 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

410W (2 Separate PSUs)

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:55PM

Note: Values within [ ] is valid for a max configuration

125

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2700/50209

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,


2CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1710-1785

Frequency Band DL (MHz)

1805-1880

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+32 dBm

Output Power UL (min)

+32 dBm

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

160W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 1:05PM

Note: Values within [ ] is valid for a max configuration

126

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2700/50409

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,


4CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1710-1785

Frequency Band DL (MHz)

1805-1880

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+28 dBm/channel

Output Power UL (min)

+28 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

160W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWV 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 1:05PM

Note: Values within [ ] is valid for a max configuration

127

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR2727/50609

STANDARD CHANNEL SELECTIVE REPEATER 1800MHz GSM,


6CH, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1710-1785

Frequency Band DL (MHz)

1805-1880

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+25 dBm/channel

Output Power UL (min)

+25 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

410W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 1:07PM

Note: Values within [ ] is valid for a max configuration

128

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR3700/50409

STANDARD CHANNEL SELECTIVE REPEATER 1900MHz GSM,


4CH, 850/1900 MHz GSM/GPRS REMOTE CONTROL, DOOR
SW,LOCK-KEYS

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1850-1910

Frequency Band DL (MHz)

1930-1990

No. of Channels

Bandwidth

200 KHz/channel

Output Power DL (min)

+28 dBm/channel

Output Power UL (min)

+28 dBm/channel

Gain adjustment range

55 to 90 dB

Noise Figure

4 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

4ch: 250W

REMOTE CONTROL*
Type

IP/SNMP: 850/1900 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

850 / 1900 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female (7/16 option)

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Aug 16 2011 1:09PM

Note: Values within [ ] is valid for a max configuration

129

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6500/00109

Standard Channel Selective Repeater 2100MHz WCDMA,


2Channel, GSM/GPRS REMOTE CONTROL, DOOR Switch

ELECTRICAL DATA*
Range

WCDMA

Frequency Band UL (MHz)

1920 -1980

Frequency Band DL (MHz)

2110 - 2170

No. of Channels

2ch

Bandwidth

4.4 MHz/channel

Output Power DL (min)

1ch +30 dBm/channel, 2ch +25 dBm/channel

Output Power UL (min)

1ch +20 dBm/channel, 2ch +15 dBm/channel

Gain adjustment range

DL 55 to 85 dB, UL 55 to 85 dB

Noise Figure

DL 6 dB, UL 4 dB

Group Delay

6 s

ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

160 W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x195 (17.6x21x7.7) Excluding bracket and hinges

Weight kg (lbs)

<26 (57)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 125 106

Regulatory Compliance EMC

TS 125 113

*All specifications subject to change without notice.

Updated: Aug 16 2011 12:57PM

Note: Values within [ ] is valid for a max configuration

130

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6512/00229

Channel Selective Standard Repeaters

Standard Repeater Dual Band Channel Selective 2100MHz


WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz
Bandwidth, GSM/GPRS REM CTRL, Combined Donor and
Service, Door Switch

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 900

Frequency Band UL (MHz)

1920 -1980

890-915

Frequency Band DL (MHz)

2110 - 2170

925-960

No. of Channels

2ch

Broad band

Bandwidth (MHz)

4.4 channel

25 MHz

Output Power DL

+24 dBm/channel

24 dBm composite

Output Power UL

+14 dBm/channel

24 dBm composite

Gain adjustment range

55 to 85 dB

55 to 85 dB

Noise Figure

UL 6 dB, DL 8 dB

7 dB

Group Delay

6 s

6 s

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

200W

ACCR
EVM
TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

NA

Fallback Circuit Switched Mode

GSM

NA

Northbound Traffic

SNMP v1, v2c and http

NA

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

NA

Remote Management

NWM 3.2.2 and greater; local web interface

NA

Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

MECHANICAL DATA*

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:24PM

131

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6512/00239

Channel Selective Standard Repeaters

Standard Repeater DualBand Channel Selective 2100MHz


WCDMA, 2Ch / Band Selective 900MHz GSM, 25MHz
Bandwidth, GSM/GPRS REM CTRL, Separated Donor and
Combined Service, Door Switch

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 900

Frequency Band UL (MHz)

1920 -1980

890-915

Frequency Band DL (MHz)

2110 - 2170

935-960

No. of Channels

2ch

Band Selective

Bandwidth (MHz)

4.4 channel

25 MHz

Output Power DL

+24 dBm channel

+25 dBm composite

Output Power UL

+15 dBm/channel

+26 dBm composite

Gain adjustment range

55 to 85 dB

55 to 85 dB

Noise Figure

UL 5 dB, DL 7 dB

6 dB

Group Delay

6 s

6 s

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

200W

ACCR
EVM
TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

Door Section

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:25PM

132

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6517/01429

Channel Selective Standard Repeaters

Standard Repeater Dual Band Channel Selective 2100MHz


WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL,
Combined Donor and Service, Door Switch

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 900

Frequency Band UL (MHz)

1920 -1980

890 - 915

Frequency Band DL (MHz)

2110 - 2170

935 - 960

No. of Channels

2ch

4ch

Bandwidth (MHz)

4.4 channel

200 KHz/channel

Output Power DL

+24 dBm/channel

+28 dBm/channel

Output Power UL

+14 dBm/channel

N/A

Gain adjustment range

55 to 85 dB

55 to 90 dB

Noise Figure

UL 6 dB DL 8 dB

5 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

250W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

NA

Fallback Circuit Switched Mode

GSM

NA

Northbound Traffic

SNMP v1, v2c and http

NA

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

NA

Remote Management

NWM 3.2.2 and greater; local web interface

NA

Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

MECHANICAL DATA*

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:27PM

133

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6517/01439

Channel Selective Standard Repeaters

Standard Repeater DualBand Channel Selective 2100MHz


WCDMA, 2Ch / 900MHz GSM, 4Ch, GSM/GPRS REM CTRL,
Separated Donor and Combined Service, Door Switch

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 900

Frequency Band UL (MHz)

1920 -1980

890 - 915

Frequency Band DL (MHz)

2110 - 2170

935 - 960

No. of Channels

2ch

4ch

Bandwidth (MHz)

4.4 channel

200 KHz/channel

Output Power DL

+24 dBm/channel

+28 dBm/channel

Output Power UL

+15 dBm/channel

+29 dBm/channel

Gain adjustment range

55 to 85 dB

55 to 90 dB

Noise Figure

UL 5 dB DL 7 dB

4 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

250W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

NA

Fallback Circuit Switched Mode

GSM

NA

Northbound Traffic

SNMP v1, v2c and http

NA

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

NA

Remote Management

NWM 3.2.2 and greater; local web interface

NA

Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

MECHANICAL DATA*

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:28PM

134

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6517/01459

Channel Selective Standard Repeaters

Standard Repeater DualBand Channel Selective 2100MHz


WCDMA, 2Channels / 900MHz EGSM, 4Channels, AC PSU, 7/16
Connectors, GSM/GPRS REM CTRL, Separated Donor and
Combined Service, DOOR Switch, LOCK-KEYS

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 900

Frequency Band UL (MHz)

1920 -1980

890 - 915

Frequency Band DL (MHz)

2110 - 2170

935 - 960

No. of Channels

2ch

4ch

Bandwidth (MHz)

4.4 channel

200 KHz/channel

Output Power DL

+24 dBm channel

+28 dBm/channel

Output Power UL

+15 dBm/channel

+29 dBm/channel

Gain adjustment range

55 to 85 dB

55 to 90 dB

Noise Figure

UL 5 dB DL 7 dB

4 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

250W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

NA

Fallback Circuit Switched Mode

GSM

NA

Northbound Traffic

SNMP v1, v2c and http

NA

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

NA

Remote Management

NWM 3.2.2 and greater; local web interface

NA

Section

Bottom Section

Door Section

RF Connection

7/16 female

7/16 female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

MECHANICAL DATA*

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:29PM

135

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR6522/01109

Channel Selective Standard Repeaters

Standard Repeater DualBand Channel Selective 2100MHz


WCDMA, 2Ch / Band Selective 1800MHz GSM Low Band,
16.9MHz Bandwidth, GSM/GPRS REM CTRL, Combined Donor
and Service, Door Switch

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA2100

GSM 1800 LB

Frequency Band UL (MHz)

1920 -1980

1710-1765

Frequency Band DL (MHz)

2110 - 2170

1805-1860

No. of Channels

2ch

Band Selective

Bandwidth (MHz)

4.4 channel

16.9 MHz

Output Power DL

+24 dBm/channel

28 dBm composite

Output Power UL

+14 dBm/channel

28 dBm composite

Gain adjustment range

55 to 85 dB

55 to 85 dB

Noise Figure

UL 6 dB DL 8 dB

7 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

160 W

200W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

Door Section

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

447x530x297 (17.6x21x11.7) Excluding bracket and


hinges

N/A

Weight kg(lbs)

<39 (86)

N/A

ENVIRONMENTAL DATA*
Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Aug 16 2011 1:30PM

136

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Channel Selective Standard Repeaters

AR6560/00209

Standard Channel Selective Repeater 2100MHz WCDMA, 2Ch,


High Power, GSM/GPRS REMOTE CONTROL, Door Switch

ELECTRICAL DATA*
Range

WCDMA2100

Frequency Band UL (MHz)

1920 -1980

Frequency Band DL (MHz)

2110 - 2170

No. of Channels

2ch

Bandwidth

4.4 MHz/channel

Output Power DL (min)

1ch +37 dBm/channel, 2ch +32 dBm/channel

Output Power UL (min)

1ch +20 dBm/channel, 2ch +15 dBm/channel

Gain adjustment range

DL 65 to 95 dB, UL 55 to 85 dB

Noise Figure

DL 6 dB, UL 4 dB

Group Delay

6 s

ACCR
EVM
TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

320W (2 separate PSU)

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

447x530x297 (17.6x21x11.7) Excluding bracket and hinges

Weight kg (lbs)

<39 (86)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 125 106

Regulatory Compliance EMC

TS 125 113

*All specifications subject to change without notice.

Updated: Aug 16 2011 1:00PM

Note: Values within [ ] is valid for a max configuration

137

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title

Range (MHz)

No. of Channels

Compact Repeater
Band Selective, 2100
MHz

WCDMA

Band selective

0.5 to 15

ALR0062/00109

141

Compact Band
Selective, 900 MHz

GSM, HSPA+,
LTE

Band selective

0.5 to 25

ALR1200/90209

142

Compact Band
Selective, 900 MHz

GSM, HSPA+,
LTE

Band selective

0.5 to 25

ALR1200/00209

143

Dual Cell Compact


Repeater, 900 MHz

GSM, HSPA+,
LTE

Band selective

0.5 to 25

ALR1212/00209

144

Compact Band
Selective, 1800 MHz

GSM, HSPA+,
LTE

Band selective

0.5 to 25

ALR2200/00209

145

Compact Band
Selective, 1800 MHz

GSM, HSPA+,
LTE

Band selective

0.5 to 25

ALR2200/90209

146

Dual Band Compact


Repeater, 1800MHz

GSM, HSPA+,
Band selective
LTE

0.5 to 15

ALR2212/00119

147

Dual Band Compact


Repeater, 1800MHz

GSM, HSPA+,
Band selective
LTE

0.5 to 15

ALR2212/00129

148

Dual Band Compact


Repeater, 1800MHz

GSM, HSPA+,
Band selective
LTE

0.5 to 15

ALR2212/92202

149

Dual Band Compact


Repeater, 1800MHz

GSM, HSPA+,
Band selective
LTE

0.5 to 15

ALR2222/00109

150

Compact Band
Selective, 1900MHz

TDMA

Band selective

0.5 to 15

ALR3200/00109

151

Compact Band
Selective, 1900MHz

CDMA

Band selective

0.5 to 15

ALR3200/01109

152

Compact Band
Selective, 1900MHz

TDMA

Band selective

0.5 to 15

ALR3200/90109

153

138

Bandwidth (MHz)

Part Number

Page

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title

Range (MHz)

No. of Channels

Compact Band
Selective, 1900MHz

CDMA

Broad band

0.5 to 15

ALR3200/91109

154

Compact Dual Band


Repeater, 1900MHz

CDMA

Band selective

0.5 to 15

ALR3232/51109

155

Compact Dual Band


Repeater, 1900MHz

CDMA

Band selective

0.5 to 15

ALR3242/03039

156

Compact Dual Band


Repeater, 1900MHz

CDMA

Band selective

0.5 to 15

ALR3246/00309

157

Compact Dual Band


Repeater, 1900MHz

TDMA

Broad band

0.5 to 15

ALR3246/010

158

Compact Dual Band


Repeater, 800MHz

TDMA

Band selective

0.5 to 15/25

ALR4200/00209

159

Compact Dual Band


Repeater, 850MHz

CDMA

Band selective

0.5 to 15

ALR4200/01109

160

Compact Dual Band


Repeater, 850MHz

CDMA

Band selective

0.5 to 25

ALR4200/01209

161

Compact Band
Selective, 850MHz

CDMA

Broad band

0.5 to 25

ALR4600/00109

162

Compact Band
Selective, 850MHz

iDEN

Band selective

0.5 to 15

ALR4600/00119

163

Compact Band
Selective, 800MHz

iDEN

Band selective

0.5 to 18

ALR4600/00209

164

Compact Band
Selective, 2100MHz

WCDMA,
HSPA+, LTE

Band selective

0.5 to 15

ALR6200/00109

165

Compact Dual Band


900/2100

WCDMA

Band selective

0.5 to 15

ALR6212/00102

166

139

Bandwidth (MHz)

Part Number

Page

Coverage Products

POWERWAVE

Band Selective Compact Repeaters

Repeater Products

Title

Range (MHz)

No. of Channels

Compact Dual Band


900/2100

WCDMA

Band selective

0.5 to 15

ALR6212/90129

167

Dual Band Compact,


900/2100MHz

WCDMA

Broad band

0.5 to 15

ALR6212/90139

168

Compact In-train Band GSM, HSPA+,


Broad band
Selective, 900 MHz
LTE

0.5 to 25

ALT1200/00209

169

140

Bandwidth (MHz)

Part Number

Page

POWERWAVE

ALR0062/00109

Band Selective Compact Repeaters

UPGRADE COMPACT REPEATER BAND SELECTIVE 2100MHz


WCDMA, BW15MHz, STAND ALONE, SEPARATED
DONOR/SERVICE

ELECTRICAL DATA*
Range

WCDMA, HSPA+, LTE

Frequency Band UL (MHz)

1920-1980

Frequency Band DL (MHz)

2110-2170

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+24 dBm Composite

Output Power UL (min)

+20 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

DL 5 dB, UL 3 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

21-60 VDC

Power Consumption

60W

REMOTE CONTROL*
Type

NA

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NA

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x55 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 125.106

Regulatory Compliance EMC

TS 125.113

*All specifications subject to change.

Updated: Nov 9 2010 6:07PM

Note: Values within [] is valid for a max configuration.

141

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR1200/90209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 900MHz EGSM,


BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

GSM, HSPA+, LTE

Frequency Band UL (MHz)

880-905

Frequency Band DL (MHz)

925-950

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+22 dBm Composite

Output Power UL (min)

+22 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

8 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, TS 25.143, TS 36.143

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Nov 9 2010 6:10PM

Note: Values within [] is valid for a max configuration.

142

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR1200/00209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 900MHz GSM,


BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

GSM, HSPA+, LTE

Frequency Band UL (MHz)

890-915

Frequency Band DL (MHz)

935-960

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+22 dBm Composite

Output Power UL (min)

+22 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

8 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, TS 25.143, TS 36.143

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Nov 9 2010 6:09PM

Note: Values within [] is valid for a max configuration.

143

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR1212/00209

Band Selective Compact Repeaters

COMPACT REPEATER DUAL CELL 900MHz GSM, 25MHz


BW/900MHz GSM, 25MHz BW, GSM/GPRS REMOTE
CONTROL,COMBINED DONOR AND SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

890-915

890-915

Frequency Band DL (MHz)

935-960

935-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

0.5 to 25 MHz

Output Power DL

+19 dBm Composite (Combined service ports)

+19 dBm Composite (Combined service ports)

Output Power UL

+19 dBm Composite (Combined donor ports)

+19 dBm Composite (Combined donor ports)

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N/A

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 6:14PM

144

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2200/00209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1800MHz GSM LB,


BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1710-1765

Frequency Band DL (MHz)

1805-1860

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+23 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

8 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x7 )

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, TS 25.143, TS 36.143

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Nov 9 2010 6:16PM

Note: Values within [] is valid for a max configuration.

145

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2200/90209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1800MHz GSM UB,


BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1730-1785

Frequency Band DL (MHz)

1825-1880

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+23 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

8 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x7 )

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005, TS 25.143, TS 36.143

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Nov 9 2010 6:17PM

Note: Values within [] is valid for a max configuration.

146

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2212/00119

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,


15/15MHz BW, GSM/GPRS REM CTRL, SEPARATED
DONOR/SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1710-1765

890-915

Frequency Band DL (MHz)

1805-1860

935-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

0.5 to 15 MHz

Output Power DL

+23 dBm Composite

+22 dBm Composite

Output Power UL

+23 dBm Composite

+22 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N/A

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 6:28PM

147

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2212/00129

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND GSM1800 LB/GSM900MHz,


15/15MHz BW, GSM/GPRS REM CTRL, COMBINED
DONOR/SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1710-1765

890-915

Frequency Band DL (MHz)

1805-1860

935-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

0.5 to 15 MHz

Output Power DL

+22 dBm Composite

+21 dBm Composite

Output Power UL

+22 dBm Composite

+21 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N/A

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 6:31PM

148

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2212/92202

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND GSM1800 UB/GSM900MHz,


25/25MHz BW, GSM/GPRS REM CTRL, SEPARATED
DONOR/SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1730-1785

890-915

Frequency Band DL (MHz)

1825-1880

935-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

0.5 to 25 MHz

Output Power DL

+23 dBm Composite

+22 dBm Composite

Output Power UL

+23 dBm Composite

+22 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N/A

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Mar 17 2011 11:43AM

149

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR2222/00109

Band Selective Compact Repeaters

Compact Repeater Dual Cell 1800MHz GSM LB, 15MHz


BW/1800MHz GSM LB, 15MHz BW, GSM/GPRS Remote
Control, Combined Donor And Service

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1710-1765

1710-1765

Frequency Band DL (MHz)

1805-1860

1805-1860

No. of Channels

Band Selective

Broad band

Bandwidth (MHz)

0.5 to 15 MHz

0.5 to 15 MHz

Output Power DL

+20 dBm Composite (Combined service ports)

+20 dBm Composite (Combined service ports)

Output Power UL

+20 dBm Composite (Combined donor ports)

+20 dBm Composite (Combined donor ports)

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWV 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N/A

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

The combined output power at donor and service port is 3dB lower than the nominal output
power for each repeater cell.

Updated: Nov 29 2010 4:36PM

150

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3200/00109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1900MHz GSM LB,


BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

TDMA

Frequency Band UL (MHz)

1850-1890

Frequency Band DL (MHz)

1930-1970

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 24

Regulatory Compliance EMC

FCC Rule 24

*All specifications subject to change.

Updated: Nov 9 2010 7:35AM

Note: Values within [] is valid for a max configuration.

151

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3200/01109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA LB,


BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1850-1890

Frequency Band DL (MHz)

1930-1970

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 24

Regulatory Compliance EMC

FCC Rule 24

*All specifications subject to change.

Updated: Nov 9 2010 7:56AM

Note: Values within [] is valid for a max configuration.

152

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3200/90109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1900MHz GSM UB,


BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

TDMA

Frequency Band UL (MHz)

1870-1910

Frequency Band DL (MHz)

1950-1990

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 24

Regulatory Compliance EMC

FCC Rule 24

*All specifications subject to change.

Updated: Nov 9 2010 7:50AM

Note: Values within [] is valid for a max configuration.

153

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3200/91109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 1900MHz CDMA UB,


BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1870-1910

Frequency Band DL (MHz)

1950-1990

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 24

Regulatory Compliance EMC

FCC Rule 24

*All specifications subject to change.

Updated: Nov 9 2010 8:07AM

Note: Values within [] is valid for a max configuration.

154

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3232/51109

Band Selective Compact Repeaters

COMPACT REPEATER DUAL CELL 1900MHz CDMA LB, 15MHz


BW/1900MHz CDMA UB, 15MHz BW, COMBINED
DONOR/SERVICE

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1870-1910 (UB)/ 1850-1890 (LB)

Frequency Band DL (MHz)

1950-1990 (UB)/ 1930-1970 (LB)

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+23 dBm Composite (UB and LB combined ports)

Output Power UL (min)

+23 dBm Composite (UB and LB combined ports)

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

120W

REMOTE CONTROL*
Type

NA

Wireless MOD EM Frequencies

Packet Data Mode

Fallback Circuit Switched Mode

Northbound Traffic

Maintenance

Remote Management

NA

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

Weight kg(lbs)

18 (40)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 24

Regulatory Compliance EMC

FCC Rule 24

*All specifications subject to change.

Updated: Nov 9 2010 2:36PM

Note: Values within [] is valid for a max configuration.

155

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3242/03039

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND CDMA 1900 MHz LB/CDMA


800MHz, 15/15MHz BW, SEPARATED DONOR/SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

CDMA 1900

CDMA 800

Frequency Band UL (MHz)

1850-1890

824-849

Frequency Band DL (MHz)

1930-1970

869-894

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

0.5 to 15 MHz

Output Power DL

+26 dBm Composite

+26 dBm Composite

Output Power UL

+26 dBm Composite

+23 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

60W

60 W

Section

Bottom Section

Door Section

Type

NA

NA

Wireless MOD EM Frequencies

NA

NA

Packet Data Mode

NA

NA

Fallback Circuit Switched Mode

NA

NA

Northbound Traffic

NA

NA

Maintenance

NA

NA

Remote Management

NA

NA

Section

Bottom Section

Door Section

RF Connection

N-female

N-female (7/16 option)

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

FCC Rule 24

FCC Rule 22

Regulatory Compliance EMC

FCC Rule 24

FCC Rule 22

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*

MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 2:50PM

156

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR3246/00309

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND GSM 1900 MHz LB/iDEN


800 MHz, 15/15MHz BW, SEPARATED DONOR/COMBINED
SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM 1900

iDEN

Frequency Band UL (MHz)

1850-1890

806-824

Frequency Band DL (MHz)

1930-1970

851-869

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 15 MHZ

0.5 to 15 MHz

Output Power DL

+24 dBm Composite

+24 dBm Composite

Output Power UL

+25 dBm Composite

+25 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

9 dB

9 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

115/230 VAC

Power Supply (Optional)

NA

NA

Power Consumption

60W

60 W

Section

Bottom Section

Door Section

Type

NA

NA

Wireless MOD EM Frequencies

NA

NA

Packet Data Mode

NA

NA

Fallback Circuit Switched Mode

NA

NA

Northbound Traffic

NA

NA

Maintenance

NA

NA

Remote Management

NA

NA

Section

Bottom Section

Door Section

RF Connection

N-female

N-female (7/16 option)

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

FCC Rule 24

FCC Rule 90

Regulatory Compliance EMC

FCC Rule 24

FCC Rule 90

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*

MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 3:04PM

157

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Compact Repeaters

ALR3246/010 family

Dual Band 1900/iDEN Compact

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

TDMA 1900

iDEN

Frequency Band UL (MHz)

1850-1890

806-824

Frequency Band DL (MHz)

1930-1970

851-869

No. of Channels

Broad band

Broad band

Bandwidth (MHz)

0.5 to 15

0.5 to 15/18 MHz

Output Power DL

+25 dBm Composit

+25 dBm Composit

Output Power UL

+25 dBm Composit

N/A

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

8 dB

8 dB

Group Delay

6 s

6 s

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

115/230 VAC

Power Supply (Optional)

21-60 VDC (optional)

21-60 VDC (optional)

Power Consumption

60W

60 W

Bottom Section

Door Section

Section

Bottom Section

Door Section

RF Connection

N-female

N-female (7/16 option)

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

FCC Rule 24

FCC Rule 90

Regulatory Compliance EMC

FCC Rule 24

FCC Rule 90

ACCR
EVM
TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB

Updated: Mar 31 2011 1:11PM

158

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4200/00209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 850MHz AMPS,


BW25MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

TDMA

Frequency Band UL (MHz)

824-849

Frequency Band DL (MHz)

869-894

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 22

Regulatory Compliance EMC

FCC Rule 22

*All specifications subject to change.

Updated: Nov 9 2010 3:17PM

Note: Values within [] is valid for a max configuration.

159

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4200/01109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 850MHz CDMA,


BW15MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

824-849

Frequency Band DL (MHz)

869-894

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 22

Regulatory Compliance EMC

FCC Rule 22

*All specifications subject to change.

Updated: Nov 9 2010 3:20PM

Note: Values within [] is valid for a max configuration.

160

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4200/01209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 850MHz CDMA,


BW25MHz, WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

824-849

Frequency Band DL (MHz)

869-894

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+23 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 22

Regulatory Compliance EMC

FCC Rule 22

*All specifications subject to change.

Updated: Nov 9 2010 3:21PM

Note: Values within [] is valid for a max configuration.

161

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4600/00109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz,


WIRELINE REMOTE CONTROL

ELECTRICAL DATA*
Range

iDEN

Frequency Band UL (MHz)

806-824

Frequency Band DL (MHz)

851-869

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

PSTN Unit

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 90

Regulatory Compliance EMC

FCC Rule 90

*All specifications subject to change.

Updated: Nov 9 2010 3:27PM

Note: Values within [] is valid for a max configuration.

162

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4600/00119

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW15MHz,


850/1900 MHz GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

iDEN

Frequency Band UL (MHz)

806-824

Frequency Band DL (MHz)

851-869

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP 850/1900 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

850 / 1900 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 90

Regulatory Compliance EMC

FCC Rule 90

*All specifications subject to change.

Updated: Nov 9 2010 3:33PM

Note: Values within [] is valid for a max configuration.

163

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR4600/00209

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 800 iPS, BW18MHz

ELECTRICAL DATA*
Range

iDEN

Frequency Band UL (MHz)

806-824

Frequency Band DL (MHz)

851-869

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 18MHz

Output Power DL (min)

+25 dBm Composite

Output Power UL (min)

+25 dBm Composite

Gain adjustment range

55 to 70 dB

Noise Figure

8 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

NA

Wireless MOD EM Frequencies

NA

Packet Data Mode

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

NA

Maintenance

NA

Remote Management

NA

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Rule 90

Regulatory Compliance EMC

FCC Rule 90

*All specifications subject to change.

Updated: Nov 9 2010 3:38PM

Note: Values within [] is valid for a max configuration.

164

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR6200/00109

Band Selective Compact Repeaters

COMPACT REPEATER BAND SELECTIVE 2100MHz WCDMA,


BW15MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

WCDMA, HSPA+, LTE

Frequency Band UL (MHz)

1920-1980

Frequency Band DL (MHz)

2110-2170

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 15 MHz

Output Power DL (min)

+24 dBm Composite

Output Power UL (min)

+20 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

DL 5 dB, UL 3 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

85-265 VAC

Power Supply (Optional)

NA

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 125.106

Regulatory Compliance EMC

TS 125.113

*All specifications subject to change.

Updated: Nov 9 2010 5:46PM

Note: Values within [] is valid for a max configuration.

165

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR6212/00102

Band Selective Compact Repeaters

COMPACT REP DB 2100 MHz WCDMA/GSM900MHz,15/15MHz


BW,GSM/GPRS REM CTRL,CMB DONOR/SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA, HSPA+, LTE

GSM, HSPA+, LTE

Frequency Band UL (MHz)

1920 -1980

890-915

Frequency Band DL (MHz)

2110 - 2170

935-960

No. of Channels

Broad band

Broad band

Bandwidth (MHz)

0.5 to 15

0.5 to 15 MHz

Output Power DL

+24 dBm Composit

+22 dBm Composit

Output Power UL

+20 dBm Composit

N/A

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

DL 5 dBUL 3 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51 dB (LTE)

-51 dB (LTE)

EVM

< 6.7% (LTE)

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

60W

60W

TECHNICAL SPECIFICATIONS*

Power Supply (Optional)


Power Consumption
REMOTE CONTROL*
Section

Bottom Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

Door Section

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB

Updated: Mar 17 2011 12:38PM

166

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR6212/90129

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND WCDMA/EGSM,


2100/900MHz, 15/25MHz BW, GSM/GPRS REM
CTRL,COMBINED DONOR AND SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA 2100

EGSM 900

Frequency Band UL (MHz)

1920 -1980

880-915

Frequency Band DL (MHz)

2110 - 2170

925-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 15

0.5 to 25 MHz

Output Power DL

+23 dBm Composite

+21 dBm Composite

Output Power UL

+19 dBm Composite

+21 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

DL 5 dBUL 3 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51dB (LTE)

EVM

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

NA

NA

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

NA

Fallback Circuit Switched Mode

GSM

NA

Northbound Traffic

SNMP v1, v2c and http

NA

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

NA

Remote Management

NWM 3.2.2 and greater; local web interface

NA

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 5:57PM

167

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALR6212/90139

Band Selective Compact Repeaters

COMPACT REPEATER DUAL BAND


WCDMA/EGSM,2100/900MHz,15/25MHz BW,AC
PSU,GSM/GPRS REM CTRL,SEPARATE DONOR/COMBINED
SERVICE

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

WCDMA 2100

EGSM 900

Frequency Band UL (MHz)

1920 -1980

880-915

Frequency Band DL (MHz)

2110 - 2170

925-960

No. of Channels

Broad band

Band Selective

Bandwidth (MHz)

0.5 to 15

0.5 to 25 MHz

Output Power DL

+23 dBm Composite

+21 dBm Composite

Output Power UL

+20 dBm Composite

+22 dBm Composite

Gain adjustment range

55 to 70 dB

55 to 70 dB

Noise Figure

DL 5 dBUL 3 dB

8 dB

Group Delay

6 s

6 s

ACCR

-51dB (LTE)

EVM

< 6.7% (LTE)

Section

Bottom Section

Door Section

Power Supply

85-265 VAC

85-265 VAC

Power Supply (Optional)

NA

N/A

Power Consumption

60W

60W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

NA

Wireless MOD EM Frequencies

900 / 1800 MHz

NA

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

385x385x160 (13x13x6)

N/A

Weight kg(lbs)

18 (40)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 125 106

TS 45.005

Regulatory Compliance EMC

TS 125 113

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Updated: Nov 9 2010 6:01PM

168

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ALT1200/00209

Band Selective Compact Repeaters

COMPACT IN-TRAIN REPEATER BAND SELECTIVE 900MHz


GSM, BW25MHz, GSM/GPRS REMOTE CONTROL

ELECTRICAL DATA*
Range

GSM, HSPA+, LTE

Frequency Band UL (MHz)

890-915

Frequency Band DL (MHz)

935-960

No. of Channels

Broad band

Bandwidth (MHz)

0.5 to 25 MHz

Output Power DL (min)

+22 dBm Composite

Output Power UL (min)

+22 dBm Composite

Gain adjustment range

55 to 70 dB (Gain ripple in band +/-1 dB)

Noise Figure

8 dB

Group Delay

6 s

ACCR

-51 dB (LTE)

EVM

< 6.7% (LTE)

TECHNICAL SPECIFICATIONS*
Power Supply

21-60 VDC

Power Supply (Optional)

N/A

Power Consumption

60W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

385x385x110 (13x13x4)

Weight kg(lbs)

10 (22)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Nov 9 2010 6:03PM

Note: Values within [] is valid for a max configuration.

169

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Band Selective Standard Repeaters

Repeater Products

Title

Range (MHz)

No. of Channels

Maritime Standard
Band Selective,
900MHz

GSM

Band selective

0.5 to 25

AM1200/05309

171

Standard Band
Selective, 900MHz

GSM, HSPA+

Broad band

0.5 to 25

AR1200/05309

172

Standard Band
Selective, 900MHz

GSM, HSPA+

Broad band

0.5 to 16.9

AR1200/95209

173

Standard Band
Selective, 1800MHz

GSM

Broad band

0.5 to 16.9

AR200/00

174

Standard Band
Selective, 1800MHz

GSM

Band selective

0.5 to 16.9

AR2200/00109

175

Standard Band
Selective, 1800MHz

GSM

Broad band

0.5 to 16.9

AR200/90109

176

Standard Band
Selective,
900/1800MHz

GSM

Broad band

0.5 to 16.9

AR2212/052

177

Standard Dual Band


Selective, 1800MHz

GSM

Band selective

0.5 to 16.9

AR2212/05209

178

Standard Band
Selective, 1900MHz

CDMA

Band selective

0.5 to 16.9

AR3400/01109

179

Standard Band
Selective, 1900MHz

CDMA

Band selective

0.5 to 16.9

AR3400/91109

180

Standard Band
Selective, 1900MHz

CDMA

Band selective

0.5 to 16.9

AR3434/51109

181

Standard Band
Selective, 850MHz

CDMA

Band selective

0.5 to 16.9

AR4200/01209

182

Standard Band
Selective, 800MHz

SMR/iDEN

Broad band

0.5 to 18

AR4600/05309

183

Standard Band
Selective, 800MHz

SMR/iDEN

Broad band

0.5 to 18

AR4640/05309

184

170

Bandwidth (MHz)

Part Number

Page

POWERWAVE

Band Selective Standard Repeaters

AM1200/05309

STANDARD BAND SELECTIVE MARITIME REPEATER 900MHz


GSM, BW25MHz, GSM/GPRS/GPS REMOTE CONTROL, Door
Switch

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

890-915

Frequency Band DL (MHz)

935-960

No. of Channels

Band Selective

Bandwidth

0.5 to 25 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+26 dBm Composit

Gain adjustment range

55 to 85 dB (Gain trail dynamic range: 30dB and gain trail tracking accuracy: 2dB)

Noise Figure

6 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

200 W

REMOTE CONTROL*
Type

IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female (7/16 option)

Dimension (HxWxD)(mm)

440x530x195 (15x19x8)

Weight kg (lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Dec 6 2010 3:32PM

Note: Values within [ ] is valid for a max configuration

171

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR1200/05309

STANDARD BAND SELECTIVE REPEATER 900MHz GSM,


BW25MHz, GSM/GPRS REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

GSM, HSPA+

Frequency Band UL (MHz)

890-915

Frequency Band DL (MHz)

935-960

No. of Channels

Broad band

Bandwidth

0.5 to 25 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+26 dBm Composite

Gain adjustment range

55 to 85 dB / Gain ripple in band +/-2 dB

Noise Figure

6 dB

Group Delay

6 s

ACCR

43 dB (HSPA+)

EVM

< 6% (HSPA+)

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

200 W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

440x530x195 (15x19x8)

Weight kg (lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Dec 6 2010 3:35PM

Note: Values within [ ] is valid for a max configuration

172

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR1200/95209

STANDARD BAND SELECTIVE REPEATER 900MHz


EGSM,BW16.9MHz,AC PSU,N CON,GSM/GPRS REMOTE
CONTROL,DOOR SW,LOCK-KEYS

ELECTRICAL DATA*
Range

GSM, HSPA+

Frequency Band UL (MHz)

880-915

Frequency Band DL (MHz)

925-960

No. of Channels

Band Selective

Bandwidth

0.5 to 16.9 MHz

Output Power DL (min)

+26 dBm Composite

Output Power UL (min)

+26 dBm Composite

Gain adjustment range

55 to 85 dB / Gain ripple in band +/-2 dB

Noise Figure

6 dB

Group Delay

6 s

ACCR

43 dB (HSPA+)

EVM

< 6% (HSPA+)

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

200 W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

440x530x195 (15x19x8)

Weight kg (lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Dec 6 2010 3:42PM

Note: Values within [ ] is valid for a max configuration

173

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2200/00

Standard Band Selective, 1800 MHz

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1710-1765

Frequency Band DL (MHz)

1805-1860

No. of Channels

Broad band

Bandwidth (MHz)

0.5 to 16.9 MHz

Output Power DL (min)

+29 dBm Composit

Output Power UL (min)

+29 dBm Composit

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

21-60 VDC (optional)

Power Consumption

200 W

MECHANICAL DATA*
RF Connection

N-female (7/16 option)

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x7 )

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change.

Updated: Dec 6 2010 3:44PM

Note: Values within [] is valid for a max configuration.

174

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2200/00109

STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM


LB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR
SWITCH

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1710 - 1765

Frequency Band DL (MHz)

1805 - 1860

No. of Channels

Broad band

Bandwidth

0.5 to 16.9 MHz

Output Power DL (min)

+29 dBm Composite

Output Power UL (min)

+29 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

200W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

440x530x195 (15x19x7 )

Weight kg (lbs)

22 [48]

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Dec 6 2010 3:46PM

Note: Values within [ ] is valid for a max configuration

175

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2200/90109

STANDARD BAND SELECTIVE REPEPEATER 1800MHz GSM


UB, BW16.9MHz, GSM/GPRS REMOTE CONTROL, DOOR
SWITCH

ELECTRICAL DATA*
Range

GSM

Frequency Band UL (MHz)

1730 - 1785

Frequency Band DL (MHz)

1825 - 1880

No. of Channels

Band Selective

Bandwidth

0.5 to 16.9 MHz

Output Power DL (min)

+29 dBm Composite

Output Power UL (min)

+29 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

ACCR

EVM

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

N/A

Power Consumption

200W

REMOTE CONTROL*
Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet Data Interface

Wireless MOD EM Frequencies

900 / 1800 MHz

Packet Data Mode

GPRS and IP Ethernet

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and RS232

Remote Management

NWM 3.2.2 and greater; local web interface

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)(mm)

440x530x195 (15x19x7 )

Weight kg (lbs)

22 [48]

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit (Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

*All specifications subject to change without notice.

Updated: Mar 17 2011 12:44PM

Note: Values within [ ] is valid for a max configuration

176

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Band Selective Standard Repeaters

AR2212/052 family

Dual Band 900/1800 Band Selective

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM 1800

GSM 900

Frequency Band UL (MHz)

1710-1765

890-915

Frequency Band DL (MHz)

1805-1860

935-960

No. of Channels

Broad band

Broad band

Bandwidth (MHz)

0.5 to 16.9

0.5 to 16.9/25 MHz

Output Power DL

+29 dBm Composit

+26 dBm Composit

Output Power UL

+29 dBm Composit

N/A

Gain adjustment range

55 to 85 dB

55 to 85 dB

Noise Figure

7 dB

7 dB

Group Delay

6 s

6 s

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

21-60 VDC (optional)

21-60 VDC (optional)

Power Consumption

200 W

200 W

Bottom Section

Door Section

Section

Bottom Section

Door Section

RF Connection

N-female (7/16 option)

N-female (7/16 option)

Dimension (HxWxD)mm(ft)

440 x 530 x 280 (1 5x19x11)

N/A

Weight kg(lbs)

37 (82)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ACCR
EVM
TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section
Type
Wireless MOD EM Frequencies
Packet Data Mode
Fallback Circuit Switched Mode
Northbound Traffic
Maintenance
Remote Management
MECHANICAL DATA*

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Performance is affected by the way Donor and Service antenna is configured (any combination
of separate or combined connection can be ordered). *If combined to common antenna, output
power decrease 1dB and NF increase 1dB

Updated: Dec 6 2010 3:49PM

177

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR2212/05209

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REPEATER DUAL BAND


1800MHz LB, BW16.9MHz/900MHz GSM, 16.9MHz BW,
GSM/GPRS REMOTE CONTROL,COMBINED DONOR AND
SERVICE, DOOR SWITCH

ELECTRICAL DATA*
Section

Bottom Section

Door Section

Range

GSM 1800

GSM 900

Frequency Band UL (MHz)

1710 - 1765

890-915

Frequency Band DL (MHz)

1805 - 1860

935-960

No. of Channels

Band Selective

Band Selective

Bandwidth (MHz)

0.5 to 16.9

0.5 to 16.9 MHz

Output Power DL

+28 dBm Composite

+25 dBm Composite

Output Power UL

+28 dBm Composite

+25 dBm Composite

Gain adjustment range

55 to 85 dB

55 to 85 dB

Noise Figure

6 dB

6 dB

Group Delay

6 s

6 s

ACCR

EVM

Section

Bottom Section

Door Section

Power Supply

115/230 VAC

115/230 VAC

Power Supply (Optional)

N/A

N/A

Power Consumption

200 W

200 W

TECHNICAL SPECIFICATIONS*

REMOTE CONTROL*
Section

Bottom Section

Door Section

Type

IP/SNMP: 900/1800 Dual Mode Wireless GPRS Packet


Data Interface

N/A

Wireless MOD EM Frequencies

900 / 1800 MHz

N/A

Packet Data Mode

GPRS and IP Ethernet

N/A

Fallback Circuit Switched Mode

GSM

N/A

Northbound Traffic

SNMP v1, v2c and http

N/A

Maintenance

10/100 BaseT Ethernet Port (DHCP managed) and


RS232

N/A

Remote Management

NWM 3.2.2 and greater; local web interface

N/A

MECHANICAL DATA*
Section

Bottom Section

Door Section

RF Connection

N-female

N-female

Dimension (HxWxD)mm(ft)

440 x 530 x 280 (1 5x19x11)

N/A

Weight kg(lbs)

37 (82)

N/A

Section

Bottom Section

Door Section

Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55)

-13 to +131 (-25 to +55)

Housing Specification

NEMA 4 / IP65

NEMA 4 / IP65

Section

Bottom Section

Door Section

Regulatory Compliance Radio

TS 45.005

TS 45.005

Regulatory Compliance EMC

EN 301 489-1

EN 301 489-1

ENVIRONMENTAL DATA*

APPROVALS AND TESTS*

*All specifications subject to change.

Notes:

Performance is affected by the way Donor and Service antenna is configured. *If combined to
common antenna, output power decrease 1dB and NF increase 1dB

Updated: Dec 6 2010 3:52PM

178

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR3400/01109

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA LB,


BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1850-1890

Frequency Band DL (MHz)

1930-1970

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 16.9 MHz

Output Power DL (min)

+33 dBm Composite

Output Power UL (min)

+33 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

200 W

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195(15x19x8)

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 24

Regulatory Compliance EMC

FCC Part 24

*All specifications subject to change.

Updated: Dec 6 2010 3:53PM

Note: Values within [] is valid for a max configuration.

179

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR3400/91109

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REPEATER 1900MHz CDMA UB,


BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SWITCH

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1870-1910

Frequency Band DL (MHz)

1950-1990

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 16.9 MHz

Output Power DL (min)

+33 dBm Composite

Output Power UL (min)

+33 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

200 W

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x8)

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 24

Regulatory Compliance EMC

FCC Part 24

*All specifications subject to change.

Updated: Dec 6 2010 3:54PM

Note: Values within [] is valid for a max configuration.

180

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR3434/51109

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REPEATER DUAL CELL


1900MHz CDMA UB,BW16.9MHz/1900MHz CDMA
LB,BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR
SWITCH

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

1870-1910 (UB) / 1850-1890 (LB)

Frequency Band DL (MHz)

1950-1990 (UB) / 1930-1970 (LB)

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 16.9 MHz (UB and LB)

Output Power DL (min)

+30 dBm Composite (combined UB and LB ports)

Output Power UL (min)

+30 dBm Composite (combined UB and LB ports)

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

400W (2 Separate PSUs)

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x280 (15x19x11)

Weight kg(lbs)

48[82]

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 24

Regulatory Compliance EMC

FCC Part 24

*All specifications subject to change.

Updated: Dec 6 2010 3:56PM

Note: Values within [] is valid for a max configuration.

181

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR4200/01209

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REPEATER 850MHz CDMA,


BW16.9MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range

CDMA

Frequency Band UL (MHz)

824-849

Frequency Band DL (MHz)

869-894

No. of Channels

Band Selective

Bandwidth (MHz)

0.5 to 16.9 MHz

Output Power DL (min)

+33 dBm Composite

Output Power UL (min)

+30 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

200 W

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x8)

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 22

Regulatory Compliance EMC

FCC Part 22

*All specifications subject to change.

Updated: Dec 6 2010 3:56PM

Note: Values within [] is valid for a max configuration.

182

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR4600/05309

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN,


BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range

SMR/iDEN

Frequency Band UL (MHz)

806-824

Frequency Band DL (MHz)

851-869

No. of Channels

Broad band

Bandwidth (MHz)

0.5 to 18 MHz

Output Power DL (min)

+33 dBm Composite

Output Power UL (min)

+33 dBm Composite

Gain adjustment range

55 to 85 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

200 W

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x195 (15x19x8)

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 90

Regulatory Compliance EMC

FCC Part 90

*All specifications subject to change.

Updated: Dec 6 2010 4:02PM

Note: Values within [] is valid for a max configuration.

183

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

AR4640/05309

Band Selective Standard Repeaters

STANDARD BAND SELECTIVE REP 800MHz SMR/iDEN, HIGH


POWER, BW18MHz, WIRELINE REMOTE CONTROL, DOOR SW

ELECTRICAL DATA*
Range

SMR/iDEN

Frequency Band UL (MHz)

806-824

Frequency Band DL (MHz)

851-869

No. of Channels

Broad band

Bandwidth (MHz)

0.5 to 18 MHz

Output Power DL (min)

+36 dBm Composite

Output Power UL (min)

+33 dBm Composite

Gain adjustment range

65 to 95 dB

Noise Figure

6 dB

Group Delay

6 s

TECHNICAL SPECIFICATIONS*
Power Supply

115/230 VAC

Power Supply (Optional)

NA

Power Consumption

320 W

MECHANICAL DATA*
RF Connection

N-female

Dimension (HxWxD)mm(ft)

440x530x280 (15x19x11)

Weight kg(lbs)

22 (48)

ENVIRONMENTAL DATA*
Operating Temperature Fahrenheit(Celsius)

-13 to +131 (-25 to +55 )

Housing Specification

NEMA 4 / IP65

APPROVALS AND TESTS*


Regulatory Compliance Radio

FCC Part 90

Regulatory Compliance EMC

FCC Part 90

*All specifications subject to change.

Updated: Dec 6 2010 4:03PM

Note: Values within [] is valid for a max configuration.

184

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Advanced Train Repeaters

Repeater Products

Title

Frequency Range
Up-Link (MHz)

Frequency Range
Down-Link (MHz)

Part Number

Page

Advanced Train Repeater


Module 900 MHz (GSM
and UMTS)

890-915

935-960

ATR1200/001xy
(GSM 900)

186

Advanced Train Repeater


Module 900 MHz (GSM
and UMTS)

890-915

935-960

ATR1200/002xy
(GSM 900)

187

Advanced Train Repeater


Module 900 MHz (EGSM
and UMTS)

880-905

925-950

ATR1200/901xy
(EGSM 900)

188

Advanced Train Repeater


Module 900 MHz (GSM
and UMTS)

880-905

925-950

ATR1200/902xy
(EGSM 900)

189

185

POWERWAVE

ATR1200/001xy
(GSM 900)

Advanced Train Repeaters

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 15MHz


ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)

890-915

Frequency Range Downlink (MHz)

935-960

Filter Bandwidth Adjustable (MHz)

0,5-15

Filter Settling Resolutions (KHz)

25

Gain Range

50-70 dB

Gain Step Resolution

1 dB

Gain Trail Dynamic Range

30 dB

Gain Trail Tracking Accuracy

2 dB

Output Power Composite (min)

+23 dBm (UL), +18 dBm (DL)

Noise Figure 70 dB Gain

8 dB

Maximum Input Power

+13 dBm

Power Supply

110 - 240 VAC, 110 DC or -24 to -48 VDC

Power Consumption

< 50 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

450 x 420 x 44 (17.7x 16.5 x 1.7)

Weight kg(lbs)

< 3 (6.6)

RF Connectors

SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +45 C

Humidity

EC 60068-2-56

Vibration

EN 300 019-1-5 V2, IEC-61373

Ingress Protection

IP21

APPROVALS AND TESTS


Safety

EN/ IEC 60 950

EMC

ETS 301 489-1

EMC for Railway Application

EN 50155, EN 50121-3-2

Radio

ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option.

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D042-071628 Updated: Nov 18 2009 1:12AM

186

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ATR1200/002xy
(GSM900)

Advanced Train Repeaters

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (GSM/UMTS), bandwidth 25MHz


ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)

890-915

Frequency Range Downlink (MHz)

935-960

Filter Bandwidth Adjustable (MHz)

0,5-25

Filter Settling Resolutions (KHz)

25

Gain Range

50-70 dB

Gain Step Resolution

1 dB

Gain Trail Dynamic Range

30 dB

Gain Trail Tracking Accuracy

2 dB

Output Power Composite (min)

+23 dBm (UL), +18 dBm (DL)

Noise Figure 70 dB Gain

8 dB

Maximum Input Power

+13 dBm

Power Supply

110 - 240 VAC, 110 DC or -24 to -48 VDC

Power Consumption

< 50 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

450 x 420 x 44 (17.7x 16.5 x 1.7)

Weight kg(lbs)

< 3 (6.6)

RF Connectors

SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +45 C

Humidity

EC 60068-2-56

Vibration

EN 300 019-1-5 V2, IEC-61373

Ingress Protection

IP21

APPROVALS AND TESTS


Safety

EN/ IEC 60 950

EMC

ETS 301 489-1

EMC for Railway Application

EN 50155, EN 50121-3-2

Radio

ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option.

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08660 Updated: Jan 3 2010 11:28PM

187

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ATR1200/901xy
(EGSM900)

Advanced Train Repeaters

Advanced Train Repeater Module 900 MHz (EGSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 15MHz


ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)

880-905

Frequency Range Downlink (MHz)

925-950

Filter Bandwidth Adjustable (MHz)

0,5-15

Filter Settling Resolutions (KHz)

25

Gain Range

50-70 dB

Gain Step Resolution

1 dB

Gain Trail Dynamic Range

30 dB

Gain Trail Tracking Accuracy

2 dB

Output Power Composite (min)

+24 dBm (UL), +18 dBm (DL)

Noise Figure 70 dB Gain

8 dB

Maximum Input Power

+13 dBm

Power Supply

110 - 240 VAC, 110 DC or -24 to -48 VDC

Power Consumption

< 50 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

450 x 420 x 44 (17.7x 16.5 x 1.7)

Weight kg(lbs)

< 3 (6.6)

RF Connectors

SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +45 C

Humidity

EC 60068-2-56

Vibration

EN 300 019-1-5 V2, IEC-61373

Ingress Protection

IP21

APPROVALS AND TESTS


Safety

EN/ IEC 60 950

EMC

ETS 301 489-1

EMC for Railway Application

EN 50155, EN 50121-3-2

Radio

ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option.

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08661 Updated: Nov 18 2009 1:12AM

188

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

ATR1200/902xy
(EGSM900)

Advanced Train Repeaters

Advanced Train Repeater Module 900 MHz (GSM and UMTS)

Advanced Train Repeater Module 900MHz (EGSM/UMTS), bandwidth 25MHz


ELECTRICAL SPECIFICATIONS
Frequency Range Uplink (MHz)

880-905

Frequency Range Downlink (MHz)

925-950

Filter Bandwidth Adjustable (MHz)

0,5-25

Filter Settling Resolutions (KHz)

25

Gain Range

50-70 dB

Gain Step Resolution

1 dB

Gain Trail Dynamic Range

30 dB

Gain Trail Tracking Accuracy

2 dB

Output Power Composite (min)

+24 dBm (UL), +18dBm (DL)

Noise Figure 70 dB Gain

8 dB

Maximum Input Power

+13 dBm

Power Supply

110 - 240 VAC, 110 DC or -24 to -48 VDC

Power Consumption

< 50 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

450 x 420 x 44 (17.7x 16.5 x 1.7)

Weight kg(lbs)

< 3 (6.6)

RF Connectors

SMA-Type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +45 C

Humidity

EC 60068-2-56

Vibration

EN 300 019-1-5 V2, IEC-61373

Ingress Protection

IP21

APPROVALS AND TESTS


Safety

EN/ IEC 60 950

EMC

ETS 301 489-1

EMC for Railway Application

EN 50155, EN 50121-3-2

Radio

ETSI EN 300 609-4

xy: reserved for power supply type and remote control/GPS option.

All specifications are subject to change without notice. Contact your Powerwave representative for complete performance data.

D031-08662 Updated: Nov 18 2009 1:13AM

189

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Digital Repeaters

Repeater Products

Title

Frequency Range (MHz)

Bandwidth (MHz)

Part Number

Page

Nexus RT 850/1900
MHz Dual Band Digital
Repeater

824-849

25

NP50B0-22111

191

Nexus RT 850 MHz


Digital Repeater

824-849

25

NP5O-11111

192

Nexus RT 1900 MHz


Digital Repeater

1850-1910

60

NPBO-11111

193

Nexus RT 1900 MHz


Digital Repeater with
Modem

880-915

35

NPBO-11311

194

Nexus RT Digital
Repeater Triple Band
900/1800/2100MHz

880-915

35

RTM1GUA2A1.J2J1.L2L1

195

Nexus RT Digital
Repeater Single Band
900MHz

880-915

35

RTM1GU-A2A1

196

Nexus RT Digital
Repeater Single Band
900/1800MHz

1710 - 1785/ 1920 1980

75 (1800MHz band),
60 (2100MHz band)

RTM1GU-A2A1.J2J1

197

880-915/1920-1980

35 (900MHz band),
60 (2100MHz band)

RTM1GU-A2A1.L2L1

198

1710-1785

75

RTM1GU-J2J1

199

1710 - 1785/ 1920 1980

75 (1800MHz band),
60 (2100MHz band)

RTM1GU-J2J1.L2L1

200

1920 to 1980

60

RTM1GU-L2L1

201

Nexus RT Digital
Repeater Dual Band
900/2100MHz
Nexus RT Digital
Repeater Single Band
1800MHz
Nexus RT Digital
Repeater Dual Band
1800/2100MHz
Nexus RT Digital
Repeater Single Band
2100MHz

190

POWERWAVE

NP50B0-22111

Digital Repeaters

Nexus RT 850/1900 MHz Dual Band Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

824 - 849

1850 -1910

Frequency Range, Downlink (MHz)

869-894

1930 -1990

Instantaneous Bandwidth (MHz)

25 (850)

Number of sub-bands

60 (1900)
1 to 2 (850MHz), 1 to 5 (1900MHz)

Individual sub-band width, selectable (MHz)

1.5 2.5 10 11 25

Total sub-band width (MHz)

2.5 5 7.5 10 15 20

25

Gain adjustment range (1 dB steps)

60
55-85 dB

Output Power Downlink

+28 dBm composite

Output Power Downlink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Noise Figure

6.6 dB (max. gain)

Feedback Cancellation

>20 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

110-120 VAC

Power Consumption

< 400 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

381 x 305 x 229(15 x 12 x 9)

Weight lbs

< 50

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-30 C to +50 C

Casing Class

IP 50

APPROVALS AND TESTS


Safety

EN 60950, ETL

Environment

ETS 300 019

EMC

ETS 301 489-1

Radio

FCC Parts 22 and 24

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20 13:27:00Z

191

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Digital Repeaters

NP5O-11111

Nexus RT 850 MHz Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

824 - 849

Frequency Range, Downlink (MHz)

869-894

Instantaneous Bandwidth (MHz)

25

Number of sub-bands

1 to 2

Individual sub-band width, selectable (MHz)

1.5 2.5 10 11 25

Total sub-band width (MHz)

25

Gain adjustment range (1 dB steps)

55-85 dB

Output Power Downlink

+28 dBm composite

Output Power Downlink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Noise Figure

6.6 dB (max. gain)

Feedback Cancellation

>20 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

110-120 VAC

Power Consumption

< 200 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

381 x 305 x 229(15 x 12 x 9)

Weight lbs

40

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-30 C to +50 C

Casing Class

IP 50

APPROVALS AND TESTS


Safety

EN 60950, ETL

Environment

ETS 300 019

EMC

ETS 301 489-1

Radio

FCC Part 22

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-04-20 13:25:13Z

192

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Digital Repeaters

NPBO-11111

Nexus RT 1900 MHz Digital Repeater

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

1850-1910

Frequency Range, Downlink (MHz)

1930-1990

Instantaneous Bandwidth (MHz)

60

Number of sub-bands

1 to 5

Individual sub-band width, selectable (MHz)

2.5 5 7.5 10 15 20

Total sub-band width (MHz)

60

Gain adjustment range (1 dB steps)

55-85 dB

Output Power Downlink

+28 dBm composite

Output Power Downlink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Noise Figure

5 dB

Feedback Cancellation

>20 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

110-120 VAC

Power Consumption

< 200 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

381 x 305 x 229(15 x 12 x 9)

Weight lbs

40

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-30 C to +50 C

Casing Class

IP 50

APPROVALS AND TESTS


Safety

EN 60950, ETL

Environment

ETS 300 019

EMC

ETS 301 489-1

Radio

FCC Part 24

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-03-24 22:04:35Z

193

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

NPBO-11311

Digital Repeaters

Nexus RT 1900 MHz Digital Repeater with Modem

ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

1850-1910

Frequency Range, Downlink (MHz)

1930-1990

Instantaneous Bandwidth (MHz)

60

Number of sub-bands

1 to 5

Individual sub-band width, selectable (MHz)

2.5 5 7.5 10 15 20

Total sub-band width (MHz)

60

Gain adjustment range (1 dB steps)

55-85 dB

Output Power Downlink

+28 dBm composite

Output Power Downlink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Output Power Uplink

+28 dBm composite

Noise Figure

5 dB

Feedback Cancellation

>20 dB

Alarm Fault

GPRS/Edge Mode (or IP connection )

Power Supply Options

110-120 VAC

Power Consumption

< 200 W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

381 x 305 x 229(15 x 12 x 9)

Weight lbs

40

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-30 C to +50 C

Casing Class

IP 50

APPROVALS AND TESTS


Safety

EN 60950, ETL

Environment

ETS 300 019

EMC

ETS 301 489-1

Radio

FCC Part 24

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 28 2011 3:47PM

194

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM11GUA2A1.J2J1.L2L1

Digital Repeaters

Nexus RT Digital Repeater Triple Band 900/1800/2100MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM11GU-A2A1.J2J1.L2L1 has one service port per band, double power supply AC type, GSM/UMTS
MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

880 - 915

1710 - 1785

1920 - 1980

Frequency Range, Downlink (MHz)

925 - 960

1805 - 1880

2110 - 2170

35

75

60

Instantaneous Bandwidth (MHz)


Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From 0.2 up to 20

Total sub-band width (MHz)

35

75

Gain adjustment range (1 dB steps)

60

55 - 100 dB

Output Power Downlink

+36 dBm composite (4 GSM carriers +35 dBm composite (4 GSM carriers
at +28 dBm), +35 dBm composite
at +28 dBm), +34 dBm composite
(WCDMA/LTE)
(WCDMA/LTE)

+35 dBm composite

Output Power Uplink

+36 dBm composite (4 GSM carriers +35 dBm composite (4 GSM carriers
at +28 dBm), +35 dBm composite
at +28 dBm), +34 dBm composite
(WCDMA/LTE)
(WCDMA/LTE)

+35 dBm composite

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

> 30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 805 W, typical average < 475W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 760 x 340 (22.0x 30.0x 13.4)

Weight lbs

<60 kg (<132 lbs)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-Radio 11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:27PM

195

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-A2A1

Digital Repeaters

Nexus RT Digital Repeater Single Band 900MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1 has first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

880 - 915

Frequency Range, Downlink (MHz)

925-960

Instantaneous Bandwidth (MHz)

35

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

35

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

+36 dBm composite (4 GSM carriers at +28 dBm)

Output Power Downlink

+36 dBm composite (WCDMA/LTE)

Output Power Uplink

+36 dBm composite (4 GSM carriers at +28 dBm)

Output Power Uplink

+36 dBm composite (WCDMA/LTE)

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 305 W, typical average 178W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 400 x 340 (22.0x 15.8x 13.4)

Weight lbs

<62 (< 28 kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:23PM

196

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-A2A1.J2J1

Digital Repeaters

Nexus RT Digital Repeater Dual Band 900/1800MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.J2J1 has one service port per band, first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

880 - 915 / 1710 - 1785

Frequency Range, Downlink (MHz)

925 - 960 / 1805 - 1880

Instantaneous Bandwidth (MHz)

35 (900MHz band), 75 (1800MHz band)

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

35 (900MHz band), 75 (1800MHz band)

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

+36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm)

Output Power Downlink

+36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE)

Output Power Uplink

+36 dBm composite (900), +35 dBm composite (1800), (4 GSM carriers at +28 dBm)

Output Power Uplink

+36 dBm composite (900), +35 dBm composite (1800), (WCDMA/LTE)

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 555W, typical average < 325W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 580 x 340 (22.0x 22.9x 13.4)

Weight lbs

<97 (<44kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:25PM

197

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-A2A1.L2L1

Digital Repeaters

Nexus RT Digital Repeater Dual Band 900/2100MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-A2A1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

880 - 915 / 1920 - 1980

Frequency Range, Downlink (MHz)

925 - 960 / 2110 - 2170

Instantaneous Bandwidth (MHz)

35 (900MHz band), 60 (2100MHz band)

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

35 (900MHz band), 60 (2100MHz band)

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

+36 dBm composite (900), (4 GSM carriers at +28 dBm)

Output Power Downlink

+36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE)

Output Power Uplink

+36 dBm composite (900), (4 GSM carriers at +28 dBm)

Output Power Uplink

+36 dBm composite (900), +35 dBm composite (2100), (WCDMA/LTE)

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 555W, typical average < 325W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 580 x 340 (22.0x 22.9x 13.4)

Weight lbs

<97 (<44kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:25PM

198

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-J2J1

Digital Repeaters

Nexus RT Digital Repeater Single Band 1800MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1 has first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

1710 to 1785

Frequency Range, Downlink (MHz)

1805 to 1880

Instantaneous Bandwidth (MHz)

75

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

75

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

+35 dBm composite (4 GSM carriers at +28 dBm)

Output Power Downlink

+35 dBm composite (WCDMA/LTE)

Output Power Uplink

+35 dBm composite (4 GSM carriers at +28 dBm)

Output Power Uplink

+35 dBm composite (WCDMA/LTE)

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 305W, typical average 178W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 400 x 340 (22.0x 15.8x 13.4)

Weight lbs

<62 (< 28 kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:24PM

199

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-J2J1.L2L1

Digital Repeaters

Nexus RT Digital Repeater Dual Band 1800/2100MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-J2J1.L2L1 has one service port per band, first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

1710 - 1785/ 1920 - 1980

Frequency Range, Downlink (MHz)

1805 - 1880 / 2110 - 2170

Instantaneous Bandwidth (MHz)

75 (1800MHz band), 60 (2100MHz band)

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

75 (1800MHz band), 60 (2100MHz band)

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

+35 dBm composite (1800), (4 GSM carriers at +28 dBm)

Output Power Downlink

+35 dBm composite (1800 & 2100 WCDMA/LTE)

Output Power Uplink

+35 dBm composite (1800), (4 GSM carriers at +28 dBm)

Output Power Uplink

+35 dBm composite (1800 & 2100 WCDMA/LTE)

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 555W, typical average < 325W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 580 x 340 (22.0x 22.9x 13.4)

Weight lbs

<97 (<44kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:26PM

200

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

RTM1GU-L2L1

Digital Repeaters

Nexus RT Digital Repeater Single Band 2100MHz

Nexus RT is suitable for GSM, WCDMA and LTE applications. RTM1GU-L2L1 has first power supply AC type, GSM/UMTS MODEM
ELECTRICAL SPECIFICATIONS
Frequency Range, Uplink (MHz)

1920 to 1980

Frequency Range, Downlink (MHz)

2110 to 2170

Instantaneous Bandwidth (MHz)

60

Number of sub-bands

Up to 8

Individual sub-band width, selectable (MHz)

From .2 up to 20

Total sub-band width (MHz)

60

Gain adjustment range (1 dB steps)

55-100 dB

Output Power Downlink

NA

Output Power Downlink

+35 dBm composite

Output Power Uplink

NA

Output Power Uplink

+35 dBm composite

Noise Figure

5 dB (75-100dB gain)

Group Delay

<6 s

Feedback Cancellation

>30 dB

Alarm Fault

IP connection or wireless modem

Power Supply Options

97-132 VAC, 195-265 VAC; 21-60 VDC (option)

Power Consumption

< 305 W, typical average 178W

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm (in)

560 x 400 x 340 (22.0x 15.8x 13.4)

Weight lbs

<62 (< 28 kg)

RF Connectors

N-type Female

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-40 C to +55 C

Casing Class

IP 65

APPROVALS AND TESTS


Safety

EN 60950-1

Environment

ETS 300 019

EMC

EN 301 489-1, EN301 489-8, EN301 489-23

Radio

EN 300 609-4, EN 301 908-11, EN 301 908-15

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RevG Updated: Oct 31 2011 5:23PM

201

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

In-Building and
Outdoor DAS Products

Turnkey Projects

Repeater Products

We deliver complete turnkey solutions for wireless


coverage. We manage the entire project with full
responsibility, starting with analyzing and determining
required signal strength, quality and planning for future
expansion, right through implementation and operations.
All Powerwave turnkey systems are backed by full
performance guarantees, with full product and component
warranties for your peace of mind.

DAS Products

Powerwave Products
As new wireless services, technologies and opportunities
emerge, the ability to rapidly adapt will become even more
vital to network operators, building owners and public safety
agencies. Thats why Powerwave engineers flexibility into
every system. Its why we choose components that are
modular and adaptable. And its why our coverage solutions
are built from the ground up to be versatile.

Coverage Products

Bi-Directional Amplifiers

POWERWAVE

In-Building and Outdoor DAS Products


Public Safety Networks

Title

Frequency Range (MHz)

Gain Range

Part Number

Page

In-Hancer Plus Series


Bi-Directional Amplifier

380-430

28-70 dB, 28-40 dB


(SB400-F2L & SB400-F4L)

SB400-A

204

In-Hancer Plus Series


Bi-Directional Amplifier

450-512

28-70 dB, 28-40 dB


(SB400-F2L & SB400-F4L)

SB400-B

205

203

POWERWAVE

SB400-A

Bi-Directional Amplifiers

In-Hancer Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed
environments experiencing coverage deficiency such as inside buildings, tunnels and garages.
MODULE SPECIFICATIONS*
Frequency Range (MHz)

380-430

Passband Ripple

2.5 dB

Digital Gain Adjustment

In 1 dB Increments

AGC Dynamic Range

25 dB

Gain_Range

28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)

ID 3rd Order Intercept Point IP3

+44 dBm

Noise Figure

<12 dB

Propagation Delay

<1 s

Input Impedance

50

VSWR

<2:1

Maximum RF Input

+10 dBm

Primary Power

120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

26.28 x 24 x 12.25

Weight (lbs)

120 lbs. approx

Operating Temperature Range (Celsius)

-10C to +50

Enclosure

Painted Steel - Wall Mount (Stainless Steel upgrade available)

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-SB400

IC Type Acceptance

541A-SB400

Filtering Options

*Range

* Passband Bandwidth

Tx to Rx Separation

SB400-F1

380-430 MHz

1.0 MHz

5.0 MHz

SB400-F5

380-430 MHz

5.0 MHz

10.0 MHz

SB400-F2L

403-430 MHz

1.5 MHz

3.0 MHz

SB400-F2H1

403-430 MHz

1.5 MHz

3.0 MHz

SB400-F3

403-430 MHz

1.5 MHz

5.0 MHz

SB400-F4L

403-430 MHz

3.0 MHz

5.0 MHz

SB400-F4H1

403-430 MHz

3.0 MHz

5.0 MHz

SB400-F2H2

NA

1.5 MHz

3.0 MHz

SB400-F4H2

NA

3.0 MHz

5.0 MHz

SB400-F2H3

NA

1.5 MHz

3.0 MHz

SB400-F4H3

NA

3.0 MHz

5.0 MHz

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 13 2010 9:13AM

204

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

SB400-B

Bi-Directional Amplifiers

In-Hancer Plus Series Bi-Directional Amplifier

Servicing UHF, the In-Hancer Plus Series includes reliable and cost-effective Bi-Directional Amplifiers (BDAs) designed to extend UHF coverage* into enclosed
environments experiencing coverage deficiency such as inside buildings, tunnels and garages.
MODULE SPECIFICATIONS*
Frequency Range (MHz)

450-512

Passband Ripple

2.5 dB

Digital Gain Adjustment

In 1 dB Increments

AGC Dynamic Range

25 dB

Gain_Range

28-70 dB, 28-40 dB (SB400-F2L & SB400-F4L)

ID 3rd Order Intercept Point IP3

+44 dBm

Noise Figure

<12 dB

Propagation Delay

<1 s

Input Impedance

50

VSWR

<2:1

Maximum RF Input

+10 dBm

Primary Power

120/240 VAC, 50-60 Hz 100 VA, 150 VA Max

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

26.28 x 24 x 12.25

Weight (lbs)

120 lbs. approx

Operating Temperature Range (Celsius)

-10C to +50

Enclosure

Painted Steel - Wall Mount (Stainless Steel upgrade available)

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-SB400

IC Type Acceptance

541A-SB400

Filtering Options

*Range

* Passband Bandwidth

Tx to Rx Separation

SB400-F1

450-512 MHz

1.0 MHz

5.0 MHz

SB400-F5

450-512 MHz

5.0 MHz

10.0 MHz

SB400-F2L

450-512 MHz

1.5 MHz

3.0 MHz

SB400-F2H1

NA

1.5 MHz

3.0 MHz

SB400-F3

450-512 MHz

1.5 MHz

5.0 MHz

SB400-F4L

450-512 MHz

3.0 MHz

5.0 MHz

SB400-F4H1

NA

3.0 MHz

5.0 MHz

SB400-F2H2

450-4 70 MHz

1.5 MHz

3.0 MHz

SB400-F4H2

450-4 70 MHz

3.0 MHz

5.0 MHz

SB400-F2H3

470-512 MHz

1.5 MHz

3.0 MHz

SB400-F4H3

470-512 MHz

3.0 MHz

5.0 MHz

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 13 2010 9:13AM

205

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Fiber Optic DAS Master Unit

Fiber Optic DAS Master Unit

Title

Power Supply

Fiber Optic DAS


Master Unit

100-230 VAC and 1660 VDC

Bandwidth (MHz)
690-2200

206

Insertion Loss
0.25 dB Alarms

Part
Number
UA115 04

Page
207

POWERWAVE

Coverage Solutions

UA115 04

Fiber Optic DAS Master Unit

The Fiber Base Unit (FBU) for Distributed Antenna Systems (DAS) applications is especially tailored to provide a comprehensive and flexible coverage solution in
complex coverage environments like underground areas, tunnels, stations and terminals. The FBU converts and reconverts RF signals to optical signals. The truly
modular design of the FBU ensures a cost efficient solution for any DAS configuration. Configurable with up to six fiber optical nodes with WDM as an option, the
FBU is intended to feed star, point-to-point and chain network configurations of fiber optical repeaters. The FBU is designed for mounting in a 19-inch rack system
and the slot-in design of the modules ensures easy serviceability and reconfiguration. Remote control via IP and SNMP is available as an option for network
supervision with Powerwave Netway Vision.
ELECTRICAL SPECIFICATIONS
Bandwidth

690-2200 MHz

Input Impedence

50 Ohm

Max Input RF Power

+36 dBm (+35 dBm composite)

Optical Transmitter Wavelength

1550 nm/1310nm

Optical Receiver Wavelength

1250 - 1600nm

Insertion Loss (min)

0.25 dB Alarms

Alarms
Fault

RX and TX Alarms/Temperature/PSM Fault

External Alarm Inputs

Power Supply Options

100-230 VAC and 16-60 VDC

Power Consumption

< 50 W, depending on configuration

Supported RF Systems

2100UMTS, GSM1800, 2100AWS, 1900, 900i, GSM-R, 850, 800i, 700PS and D-block

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

482.6 x 133.5 (3U) x 415 (19 x 5 x 16)

Weight lbs

<7 (15)

RF Connectors

SMA Female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature

-30 to + 55 C (Ambient)

Ingress Protection

IP42

APPROVALS AND TESTS


Safety

-30 to + 55 C (Ambient)

Radio

IP42

Environment

EN 300 019 and GR-63-CORE

EMC

EN 301 489-1 and GR-1089-CORE

All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Aug 4 2011 3:19PM

207

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

LinkNet Convergence Platform

POWERWAVE

In-Building and Outdoor DAS Products


Public Safety Networks

Title

Frequency Range (MHz) Bandwidth

Part Number

LNKA800 Amplifier

806-940

Broadband Amplifier

LNKA800

209

LNKF400

406.125-430, 450-512

Narrowband FM 12.5 or 25
KHz

LNKF400

210

LNKC1900
Banded Repeater

N/A

0.25 MHz, 1.25 MHz,


5 MHz, 15 MHz

LNKC1900

211

LNKA900

890-960

Broadband Amplifier

LNKA900

212

LNKC1800
Banded Repeater

N/A

0.25 MHz, 1.25 MHz, 5 MHz,


15 MHz

LNKC1800

213

LNKF100

136-157, 155174

Narrowband FM 12.5 or 25
KHz

LNKF100

214

LNKF800

806-824,851-869,
896-901,935-940

Narrowband FM 12.5 or 25
KHz

LNKF800

215

208

Page

POWERWAVE

LinkNet Convergence Platform

LNKA800

LNKA800 Amplifier

MODULE SPECIFICATIONS*
Frequency Range (MHz)

806-940

Downlink Frequency Range (MHz)

NA

Uplink Frequency Range (MHz)

NA

Bandwidth

Broadband Amplifier

RF Gain Adjustment Range

+34 dB to +84 dB, in 1 dB increments

AGC Control Adjustment Range

+15 dBm to +30 dBm

RF Frequency Stability

NA

Maximum RF Output Power

NA

RF Output Power Range

NA

RF Output Power Variation

NA

Output Power 1

NA

Output Power 2

NA

Output Power 3

NA

Input Dynamic Range

NA

Input Sensitivity Adjust Range

NA

Input Hysteresis

NA

Adjacent Channel Sensitivity

NA

ID 3rd Order Intercept Point IP3

+47 dBm Typical

Noise Figure

<8 dB, 5 dB Typical

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm Maximum

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<200 nS

Audio Distortion and Noise

NA

Power Supply Module Requirements

40Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-LNKA800

IC Type Acceptance

1541311246A

* Module Family

Type

Frequency

LNKA800-A

Broadband Amplifier

806-824 MHz

LNKA800-B

Broadband Amplifier

851-869 MHz

LNKA800-C

Broadband Amplifier

824-849 MHz

LNKA800-D

Broadband Amplifier

869-894 MHz

LNKA800-E

Broadband Amplifier

896-902 MHz

LNKA800-F

Broadband Amplifier

928-940 MHz

NA

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

209

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF400

LNKF400

MODULE SPECIFICATIONS*
Frequency Range (MHz)

406.125 - 430, 450 - 512 MHz

Downlink Frequency Range (MHz)

NA

Uplink Frequency Range (MHz)

NA

Bandwidth

Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range

NA

AGC Control Adjustment Range

NA

RF Frequency Stability

Tracks input signal exactly

Maximum RF Output Power

+37 dBm

RF Output Power Range

+17 dBm to +37 dBm

RF Output Power Variation

+/- 1 dB

Output Power 1

NA

Output Power 2

NA

Output Power 3

NA

Input Dynamic Range

-110 dBm to -30 dBml

Input Sensitivity Adjust Range

-110 dBm to -50 dBm

Input Hysteresis

1 dB to 10 dB

Adjacent Channel Sensitivity

60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

ID 3rd Order Intercept Point IP3

NA

Noise Figure

NA

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise

<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements

45 Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-OFR400-A, H6M-OFR400

IC Type Acceptance

1541195680A

* Module Family

Type

Frequency

LNKF400-A1

25 KHz FM channels

406.125-430 MHz

LNKF400-A2

12.5 KHz FM channels

406.125-430 MHz

LNKF400-C1

25 KHz FM channels

450-470 MHz

LNKF400-C2

12.5 KHz FM channels

450-470 MHz

LNKF400-D1

25 KHz FM channels

470-490 MHz

LNKF400-D2

12.5 KHz FM channels

470-490 MHz

LNKF400-E1

25 KHz FM channels

490-512 MHz

LNKF400-E2

12.5 KHz FM channels

490-512 MHz

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

210

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKC1900

LNKC1900 Banded Repeater

MODULE SPECIFICATIONS*
Frequency Range (MHz)

NA

Downlink Frequency Range (MHz)

1850-1910, 1930-1990

Uplink Frequency Range (MHz)

NA

Bandwidth

0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz

RF Gain Adjustment Range

+65 dB to +95 dB, in 1 dB increments

AGC Control Adjustment Range

NA

RF Frequency Stability

Tracks input signal exactly

Maximum RF Output Power

NA

RF Output Power Range

NA

RF Output Power Variation

NA

Output Power 1

1 Carrier: +27 dBm

Output Power 2

2 Carrier: +23 dBm each

Output Power 3

3 Carrier: +21 dBm each

Input Dynamic Range

NA

Input Sensitivity Adjust Range

NA

Input Hysteresis

NA

Adjacent Channel Sensitivity

NA

ID 3rd Order Intercept Point IP3

+44 dBm

Noise Figure

<6 dB

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm Maximum

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models

Audio Distortion and Noise

NA

Power Supply Module Requirements

40Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-LNKC1900

IC Type Acceptance

1541311242A

* Module Family

Type

Frequency

LNKC1900-D.2

Downlink 0.25 MHz Bandwidth

1930-1990 MHz

LNKC1900-D

Downlink 1.25 MHz Bandwidth

1930-1990 MHz

LNKC1900-D5

Downlink 5 MHz Bandwidth

1930-1990 MHz

LNKC1900-D15

Downlink 15 MHz Bandwidth

1930-1990 MHz

LNKC1900-U.2

Uplink 0.25 MHz Band

1850-1910 MHz

LNKC1900-U

Uplink 1.25 MHz Bandwidth

1850-1910 MHz

LNKC1900-U5

Uplink 5 MHz Bandwidth

1850-1910 MHz

LNKC1900-U15

Uplink 15 MHz Bandwidth

1850-1910 MHz

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

211

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKA900

LNKA900

MODULE SPECIFICATIONS*
Frequency Range (MHz)

890-960

Downlink Frequency Range (MHz)

NA

Uplink Frequency Range (MHz)

NA

Bandwidth

Broadband Amplifier

RF Gain Adjustment Range

+34 dB to +84 dB, in 1 dB increments

AGC Control Adjustment Range

+15 dBm to +30 dBm

RF Frequency Stability

NA

Maximum RF Output Power

NA

RF Output Power Range

NA

RF Output Power Variation

NA

Output Power 1

NA

Output Power 2

NA

Output Power 3

NA

Input Dynamic Range

NA

Input Sensitivity Adjust Range

NA

Input Hysteresis

NA

Adjacent Channel Sensitivity

NA

ID 3rd Order Intercept Point IP3

+47 dBm Typical

Noise Figure

<8 dB, 5 dB Typical

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm Maximum

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<200 nS

Audio Distortion and Noise

NA

Power Supply Module Requirements

40Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode

Configuration Options

Modules may be configured via optionalGateway Module, or via PC and an RS-232Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2 x 9.11 x 14 (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

NA

IC Type Acceptance

NA

* Module Family

Type

Frequency

LNKA900-A

Broadband Amplifier

890-915 MHz

LNKA9800-B

Broadband Amplifier

935-960 MHz

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 23 2010 10:50PM

212

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKC1800

LNKC1800 Banded Repeater

MODULE SPECIFICATIONS*
Frequency Range (MHz)

NA

Downlink Frequency Range (MHz)

1805-1880

Uplink Frequency Range (MHz)

1710-1785

Bandwidth

0.25 MHz, 1.25 MHz, 5 MHz, 15 MHz

RF Gain Adjustment Range

+65 dB to +95 dB, in 1 dB increments

AGC Control Adjustment Range

NA

RF Frequency Stability

Tracks input signal exactly

Maximum RF Output Power

NA

RF Output Power Range

NA

RF Output Power Variation

NA

Output Power 1

NA

Output Power 2

NA

Output Power 3

NA

Input Dynamic Range

NA

Input Sensitivity Adjust Range

NA

Input Hysteresis

NA

Adjacent Channel Sensitivity

NA

ID 3rd Order Intercept Point IP3

+44 dBm

Noise Figure

<6 dB

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm Maximum

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<5 s for 0.25 MHz or 1.25 MHz Models, <3 s for 5 MHz or 15 MHz Models

Audio Distortion and Noise

NA

Power Supply Module Requirements

40Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

NA

IC Type Acceptance

NA

* Module Family

Type

Frequency

LNKC1800-D.2

Downlink 0.25 MHz Bandwidth

1805-1880 MHz

LNKC1800-D

Downlink 1.25 MHz Bandwidth

1805-1880 MHz

LNKC1800-D5

Downlink 5 MHz Bandwidth

1805-1880 MHz

LNKC1800-D15

Downlink 15 MHz Bandwidth

1805-1880 MHz

LNKC1800-U.2

Uplink 0.25 MHz Bandwidth

1710-1785 MHz

LNKC1800-U

Uplink 1.25 MHz Bandwidth

1710-1785 MHz

LNKC1800-U5

Uplink 5 MHz Bandwidth

1710-1785 MHz

LNKC1800-U15

Uplink 15 MHz Bandwidth

1710-1785 MHz

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

213

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF100

LNKF100

MODULE SPECIFICATIONS*
Frequency Range (MHz)

136 - 157, 155 - 174

Downlink Frequency Range (MHz)

NA

Uplink Frequency Range (MHz)

NA

Bandwidth

Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range

NA

AGC Control Adjustment Range

NA

RF Frequency Stability

NA

Maximum RF Output Power

+37 dBm

RF Output Power Range

+20 dBm to +37 dBm

RF Output Power Variation

+/- 1 dB

Output Power 1

NA

Output Power 2

NA

Output Power 3

NA

Input Dynamic Range

-110 dBm to -30 dBml

Input Sensitivity Adjust Range

-110 dBm to -50 dBm

Input Hysteresis

1 dB to 10 dB

Adjacent Channel Sensitivity

60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

ID 3rd Order Intercept Point IP3

NA

Noise Figure

NA

Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise

<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements

45 Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

NA

IC Type Acceptance

NA

* Module Family

Type

Frequency

LNKF100-A1

25 KHz FM channels

136-157 MHz

LNKF100-A2

12.5 KHz FM channels

136-157 MHz

LNKF100-B1

25 KHz FM channels

155-174 MHz

LNKF100-B2

12.5 KHz FM channels

155-174 MHz

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

214

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

LinkNet Convergence Platform

LNKF800

LNKF800

MODULE SPECIFICATIONS*
Frequency Range (MHz)

806-824,851-869,896-901,935-940

Downlink Frequency Range (MHz)

NA

Uplink Frequency Range (MHz)

NA

Bandwidth

Narrowband FM 12.5 or 25 KHz

RF Gain Adjustment Range

NA

AGC Control Adjustment Range

NA

RF Frequency Stability

Tracks input signal exactly

Maximum RF Output Power

+38 dBm (+37 dBm for G2, H2 models)

RF Output Power Range

+17 dBm to +38 dBm (+37 dBm)

RF Output Power Variation

+/- 1 dB

Output Power 1
Output Power 2
Output Power 3
Input Dynamic Range

-110 dBm to -30 dBml

Input Sensitivity Adjust Range

-110 dBm to -50 dBm

Input Hysteresis

1 dB to 10 dB

Adjacent Channel Sensitivity

60 dB minimum for 25 KHz modules, 55 dB for 12.5 Khz modules

ID 3rd Order Intercept Point IP3


Noise Figure
Transmit Duty Cycle

Continuous

Transmit Spurious

-13 dBm max for 25 KHz modules, -20 dBm max for 12.5 KHz modules

Receive Conducted Spurious

-57 dBm Maximum

Group Delay

<120 microsecs for 25 KHz modules, <160 microsecs for 12.5 KHz modules

Audio Distortion and Noise

<4% increase for 25 KHz modules, <5% increase for 12.5 KHz modules

Power Supply Module Requirements

45 Watts Maximum

RF Connectors

SMA (50 ) Connectors on back of Chassis

Connections

DB-15 Connector on back of Chassis provides Per-Module Fault Relay, Interconnect to other Modules, and
RS-232 connection.

Front Panel Indicators

Operating, Stand By, Fault, Program Mode, Receive, Transmit

Configuration Options

Modules may be configured via optional Gateway Module, or via PC and an RS-232 Connection

MECHANICAL SPECIFICATIONS*
Dimensions HxWxD mm(ft)

2" x 9.11" x 14" (51 x 231.4 x 355.6)

Weight (lbs)

10

Operating Temperature Range (Celsius)

-10C to +50

Operating Humidity Range

10 to 90% RH, Non-Condensing

ACCEPTANCE TYPE*
FCC Type Acceptance

H6M-OFR800, H6M-LNKF800

IC Type Acceptance

1541195685A, 1541196848A

* Module Family
LNKF800-A1

Type

Frequency

25 KHz FM channels

806-824 MHz

LNKF800-B1

25 KHz FM channels

851-869 MHz

LNKF800-C2

12.5 KHz FM channels

806-824 MHz

LNKF800-D2

12.5 KHz FM channels

851-869 MHz

LNKF800-G2

12.5 KHz FM channels

896-901 MHz

LNKF800-H2

12.5 KHz FM channels

935-940 MHz

NA

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

215

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Tap-In Signal Distribution Taps

In-Building and Outdoor DAS Products


Public Safety Networks

Title
Tap-In Signal Distribution Taps

216

Part Number

Page

Tap-In

217

POWERWAVE

Tap-In

Tap-In Signal Distribution Taps

1/2 Taps for Frequencies 100 MHz 520 MHz

1/2" Taps for Frequencies 100 MHz - 520 MHz


Model Number

FCT5-12

FCT5-16

Nominal Coupling Loss

12 dB

16 dB

FCT5-20
20 dB

Insertion Loss & 150 MHz

0.7 dB

0.5 dB

0.3 dB

Line Input Power

15 W

15 W

15 W

FCT7-20

5/8" Taps for Frequencies 100 MHz - 520 MHz


Model Number

FCT7-12

FCT7-16

Nominal Coupling Loss

12 dB

16 dB

20 dB

Insertion Loss & 150 MHz

0.7 dB

0.5 dB

0.3 dB

Line Input Power

15 W

15 W

15 W

CCT5-20

1/2" Taps for Frequencies 300 MHz - 1000 MHz


Model Number

CCT5-12

CCT5-16

Nominal Coupling Loss

12 dB

16 dB

20 dB

Insertion Loss & 450 MHz

0.8 dB

0.5 dB

0.3 dB

Line Input Power

15 W

45 W

90 W

CCT7-20

5/8" Taps for Frequencies 300 MHz - 1000 MHz


Model Number

CCT7-12

CCT7-16

Nominal Coupling Loss

12 dB

16 dB

20 dB

Insertion Loss & 450 MHz

0.8 dB

0.5 dB

0.3 dB

Line Input Power

15 W

45 W

90 W

PCT5-12

PCT5-16

1/2" Taps for Frequencies 800 MHz - 2000 MHz


Model Number
Nominal Coupling Loss

12 dB

16 dB

Insertion Loss & 1.9 GHz

0.8 dB

0.5 dB

Line Input Power

15 W

45 W

PCT7-12

PCT7-16

5/8" Taps for Frequencies 800 MHz - 2000 MHz


Model Number
Nominal Coupling Loss

12 dB

16 dB

Insertion Loss & 1.9 GMHz

0.8 dB

0.5 dB

Line Input Power

15 W

45 W

TAP-IN GENERAL SPECIFICATIONS


RF Output Impedance

50

Dimensions, HxWxD (in)

2 x 2 x 1.5

Output Connector

TNC Female

Output Power (Maximum)

1W

EXACT TAP-IN DIAMETER MEASUREMENT


Tap In Diameter in(mm) 1/2" Taps

0.58 (14.73)

Tap In Diameter in(mm) 5/8" Taps

0.83 (21)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 2 2010 4:03PM

217

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Public Safety

In-Building and Outdoor DAS Products


Commercial

Title
Nexus FT Single
Band 700MHz for
Public Safety (PS)
and D block

Frequency
Band (UL)
PS: 788 to 805
MHz (includes
upper D block)

Frequency Band Gain Adjustment


(DL)
Range DL
PS: 758 to 775
MHz (includes
upper D block)

218

45 - 70 dB

Part Number

Page

RH700030/101

219

POWERWAVE

Nexus FT Single and Dual Band

RH700030/101

Nexus FT Single Band 700MHz for Public Safety (PS) and D


block

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

PS: 788 to 805 MHz (includes upper D block)

Frequency Band DL

PS: 758 to 775 MHz (includes upper D block)

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

45 - 70 dB

Gain Adjustment Range UL

35 - 60 dB

Gain Step Resolution

1dB

Band 1 Output Power at Antenna Port

43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Instantaneous Bandwidth

17 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Type

110 - 230 VAC

Power Consumption

210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465x530x195 (18 x 20.9 x 8.3)

Weight kg(lbs)

23 kg (50.7 lbs)

RF Connectors

7/16 DIN Female

Optical Connectors

FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +55C

Ingression Protection

IP-65 (NEMA4)

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 15,27,90

Environment

GR-36-CORE

EMC

FCC CFR47 Part 15, 27


*Carrier Count

Power Per Carrier

Composite Power

NA

NA

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 2 2010 3:55PM

219

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Wide Band Radio Heads

In-Building and Outdoor DAS Products


Commercial

Title

Dimension_HxWXD_mm_(ft)

Door Upgrade, Wide Band


440 x 530 x 195 (15x19x8)
Radio Head (WRH)
Triple Band
900/1800/2100HP

Weight kg (lbs)

Part Number

<37 (82)

RH004000/003

221

RH621010

222

440 x 530 x 280 (1 5x19x11) <37 (82)

220

Page

POWERWAVE

RH004000/003

Wide Band Radio Heads

Door Upgrade, Wide Band Radio Head (WRH) single band


850MHz, for upgrade of single band 2W 1900MHz WRH base

ELECTRICAL DATA*
Frequency UL Band 1 (MHz)

N/A (base)

Frequency DL Band 1 (MHz)

N/A (base)

Frequency UL Band 2 (MHz)

824-849

Frequency DL Band 2 (MHz)

869-894

Frequency UL Band 3 (MHz)

N/A

Frequency DL Band 3 (MHz)

N/A

Frequency UL Band 4 (MHz)

N/A

Frequency DL Band 4 (MHz)

N/A

Gain Adjustment Range

(1dBsteps), 30 dB

Gain Step Resolution

1 dB

Max Absolute Delay

<300 ns

Max Input Power in UL

+13 dBm damaging level

Output Power DL, band 1, 4 carrier

N/A

Output Power DL, band 1, 8 carrier

N/A

Output Power DL, band 1, 16 carrier

N/A

Output Power DL, band 2, 4 carrier

4CDMA, 26dBm

Output Power DL, band 2, 8 carrier

8 CDMA, 23dBm

Output Power DL, band 3, 4 carrier

N/A

Output Power DL, band 3, 8 carrier

N/A

Output Power DL, band 4, 4 carrier

N/A

Output Power DL, band 4, 8 carrier

N/A

Noise Figure (excluding fiber)

4 dB

Intermodulation band 1

N/A

Intermodulation band 2

N/A

Intermodulation band 3

N/A

Intermodulation band 4

N/A

MISCELLANEOUS SPECIFICATION*
Alarm

Fault, LED and by remote control

Power Supply

115/230 VAC

Power Consumption

<110 W

MECHANICAL DATA*
Dimension (HxWxD) mm(ft)

440 x 530 x 195 (15x19x8)

Weight kg (lbs)

<22.5 (82)

RF Connection

N-type female, duplexed service port,

ENVIRONMENTAL DATA*
Operating Temperature Celsius

-25 to +55

Housing Specification

NEMA 4 / IP65

Ingression Protection

N/A

APPROVALS AND TESTS*


Safety

EN 60950, ETL,

Environment

ETS 300 019-2.4E

Regulatory Compliance EMC

EN301 489-1

Regulatory Compliance Radio

FCC Part 24, 22

*All specifications subject to change.


Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: May 4 2010 4:59AM

221

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Wide Band Radio Heads

RH621010

Triple Band 900/1800/2100HP

ELECTRICAL DATA*
Frequency UL Band 1 (MHz)

GSM 900, 890-915

Frequency DL Band 1 (MHz)

GSM 900, 935-960

Frequency UL Band 2 (MHz)

GSM 1800, 1710-1785

Frequency DL Band 2 (MHz)

GSM1800, 1805-1880

Frequency UL Band 3 (MHz)

UMTS, 1920-1980

Frequency DL Band 3 (MHz)

UMTS 2110-2170

Frequency UL Band 4 (MHz)

N/A

Frequency DL Band 4 (MHz)

N/A

Gain Adjustment Range

(1dBsteps), 30 dB

Gain Step Resolution

2 dB

Max Absolute Delay

<300 ns

Max Input Power in UL

+13 dBm damaging level

Output Power DL, band 1, 4 carrier

21dBm/carrier

Output Power DL, band 1, 8 carrier

18 dBm/carrier

Output Power DL, band 2, 4 carrier

23 dBm/carrier

Output Power DL, band 2, 8 carrier

20 dBm/carrier

Output Power DL, band 3, 4 carrier

30 dBm/carrier

Output Power DL, band 3, 8 carrier

27 dBm/carrier

Output Power DL, band 4, 4 carrier

N/A

Output Power DL, band 4, 8 carrier

N/A

Noise Figure (excluding fiber)

GSM900 4 dB, GSM1800 4 dB, UMTS2100 4.5 dB

Intermodulation band 1

GSM 900, -36 dBm

Intermodulation band 2

GSM 1800, -30 dBm

Intermodulation band 3

N/A

Intermodulation band 4

N/A

MISCELLANEOUS SPECIFICATION*
Alarm

Fault, LED and by remote control

Power Supply

115/230 VAC or 24/48 VDC

Power Consumption

<425 W

MECHANICAL DATA*
Dimension (HxWxD) mm(ft)

440 x 530 x 280 (1 5x19x11)

Weight kg (lbs)

<37 (82)

RF Connection

N-type female or 7/16

ENVIRONMENTAL DATA*
Operating Temperature Celsius

-25 to +55

Housing Specification

NEMA 4 / IP67

Ingression Protection

Lock

APPROVALS AND TESTS*


Safety

EN 60950, ETL,

Environment

ETS 300 019

Regulatory Compliance EMC

EN301 489-1, TS125 113

Regulatory Compliance Radio

ETS300 609-4, TS125 143

*All specifications subject to change.


Note: Performance is affected by the way Donor and Service antenna is configured (any combination of separate or combined connection can be ordered)

Updated: 2009-03-16 17:42:14Z

222

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial
Frequency Band
(UL)

Frequency
Band (DL)

Gain Adjustment
Range DL

Part Number

Page

Nexus FT Cover
Upgrade 850 MHz
Single Band

824 - 849 MHz

869 - 894 MHz

25 dB (45 - 70 dB)

RH004002/001

226

Nexus FT Single
Band EGSM900

880-915 MHz

925-960 MHz

20 dB (45 65 dB)

RH100020/101

227

Nexus FT Single
Band EGSM900

880-915 MHz

925-960 MHz

20 dB (45 65 dB)

RH100020/211

228

Title

Nexus FT Single
Band DCS1800

1710-1785 MHz 1805-1880 MHz

20 dB (45 65 dB)

RH200020/101

229

Nexus FT Single
Band DCS1800

1710-1785 MHz 1805-1880 MHz

20 dB (45 65 dB)

RH200020/211

230

Nexus FT Dual Band


1800/900

1710-1785, 880- 1805-1880, 92520 dB (45 65 dB)


915 MHz
960 MHz

RH201022/101

231

Nexus FT Dual Band


1800/900

1710-1785, 880- 1805-1880, 92520 dB (45 65 dB)


915 MHz
960 MHz

RH201022/211

232

Nexus FT 1900 MHz


1850 1910 MHz
Single Band

1930 - 1990
MHz

25 dB (45 70 dB)

RH300020/101

233

Nexus FT 1900 MHz


1850 1910 MHz
Single Band

1930 - 1990
MHz

25 dB (45 70 dB)

RH300020/211

234

Nexus FT Dual Band


PCS/Cellular

1850-1910, 824- 1930-1990, 86925 dB (45 70 dB)


849 MHz
894 MHz

RH304022/101

235

Nexus FT Dual Band


PCS/Cellular

1850-1910, 824- 1930-1990, 86925 dB (45 70 dB)


849 MHz
894 MHz

RH304022/211

236

Nexus FT Dual Band 1850-1910, 1710- 1930-1990,


PCS/AWS
1755 MHz
2110-2155 MHz

25 dB (45 70 dB)

RH309022/101

237

Nexus FT Dual Band 1850-1910, 1710- 1930-1990,


PCS/AWS
1755 MHz
2110-2155 MHz

25 dB (45 70 dB)

RH309022/211

238

223

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial
Frequency
Band (UL)

Frequency
Band (DL)

Gain Adjustment
Range DL

Part Number

Page

1850 1915
MHz

1930 - 1995 MHz

25 dB (45 70 dB)

RH330020/101

239

Nexus FT Dual Band


1850-1915, 824- 1930-1995, 869PCS/Cellular
849 MHz
894 MHz
Including G-block

25 dB (45 70 dB)

RH334022/101

240

Nexus FT 850 MHz


Single Band

824 849 MHz

869 894 MHz

25 dB (45 70 dB)

RH400020/101

241

Nexus FT 850 MHz


Single Band

824 849 MHz

869 894 MHz

25 dB (45 70 dB)

RH400020/211

242

Nexus FT Single
Band 800iDEN

806 824 MHz

851 869 MHz

25 dB (45 70 dB)

RH500020/101

243

Nexus FT Single
Band 800iDEN &
Public Safety

806 824 MHz

851 869 MHz

25 dB (45 70 dB)

RH500020/211

244

Nexus FT Single
Band 2100MHz
UMTS

1920-1980 MHz 2110-2170 MHz

20 dB (45 65 dB)

RH600020/101

245

Nexus FT Single
Band 2100MHz
UMTS

1920-1980 MHz 2110-2170 MHz

20 dB (45 65 dB)

RH600020/211

246

Nexus FT Dual Band


1920-1980, 880- 2110-2170, 925EGSM900 &
915 MHz
960 MHz
WCDMA2100

20 dB (45 65 dB)

RH601022/101

247

Nexus FT Dual Band


1920-1980, 880- 2110-2170, 925EGSM900 &
915 MHz
960 MHz
WCDMA2100

20 dB (45 65 dB)

RH601022/211

248

20 dB (45 65 dB)

RH602022/101

249

45 - 70 dB

RH700030/101

250

25 dB (45 70 dB)

RH705032/101

251

Title
Nexus FT 1900 MHz
Including G-block
Single Band

Nexus FT Dual Band


1920-1980, 2110-2170, 1805DCS1800 &
1710-1785 MHz
1880 MHz
WCDMA2100
Nexus FT Single
PS: 788 to 805 PS: 758 to 775
Band 700MHz for
MHz (includes
MHz (includes
Public Safety (PS)
upper D block) upper D block)
and D block
Nexus FT Dual Band 788 to 805 MHz 758 to 775 MHz
700MHz for Public
(includes upper (includes upper D
Safety (PS) and D
D block), 806 - block), 851 - 869
block /800iDEN
824 MHz
MHz

224

Coverage Products

POWERWAVE

Nexus FT Single and Dual Band

In-Building and Outdoor DAS Products


Commercial
Frequency Band
Frequency
Gain Adjustment
(UL)
Band (DL)
Range DL
lower A, B and C A, B and C blocks
Nexus FT Single Band
blocks (698MHz(728MHz45 - 70 dB
700MHz LTE (A,B,C AND 716MHz), upper C 746MHz), upper
UPPER C BLOCKS)
block (776MHz- C block (746MHz787MHz)
757MHz)
lower A, B and C A, B and C blocks
blocks (698MHz(728MHzNexus FT 700 MHz MIMO 716MHz), upper C 746MHz), upper 25 dB (45 70 dB)
block (776MHz- C block (746MHz787MHz)
757MHz)
Nexus FT Dual Band
806-824, 896-902 851-869, 935-941
25 dB (45 70 dB)
900iDEN/800iDEN&Public
MHz
MHz
Safety
Title

Part Number

Page

RH770020/101

252

RH777722/251

253

RH805022/101

254

Nexus FT Dual Band


806-824, 896-902 851-869, 935-941
900iDEN/800iDEN&Public
25 dB (45 70 dB)
MHz
MHz
Safety

RH805022/211

255

Nexus FT Single Band


AWS

1710-1755 MHz

2110-2155 MHz

25 dB (45 70 dB)

RH900020/101

256

Nexus FT Single Band


AWS

1710-1755 MHz

2110-2155 MHz

25 dB (45 70 dB)

RH900020/211

257

Nexus FT 2100 MHz


AWS MIMO

1710-1755 MHz

2110-2155 MHz

25 dB (45 70 dB)

RH909022/251

258

225

POWERWAVE

Nexus FT Single and Dual Band

RH004002/001

Nexus FT Cover Upgrade 850 MHz Single Band

Cover Upgrade Configuration - AC powered, with one duplexed 7/16 DIN connector RF service port and coax RF donor port.
ELECTRICAL SPECIFICATIONS
Frequency Band UL

824 - 849 MHz

Frequency Band DL

869 - 894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 - 70 dB)

Gain Adjustment Range UL

25 dB (35 - 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite Power 43 dBm

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-13 dBm (FCC)

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm (FCC)

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 156 (18 x 20.9 x 6.1)

Weight kg(lbs)

< 22 kg (48 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEM A 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 part 22

Environment

ETS 300 019

EMC

EN 301 489
Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40

43

29

32

37

43

29

35

34

43

29

38

16

31

43

28

40

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: 2009-03-10 12:29:47Z

226

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH100020/101

Nexus FT Single Band 900MHz

RH100020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

880-915 MHz

Frequency Band DL

925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)

Instantaneous Bandwidth

35 MHz, EVM<7% , PCDE< -47dB, ACCR> 49dB[HSDPA+], EVM<7% , ACCR>48dB[LTE]

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by Remote Control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg. (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETS 300 609-4, TS 25.143 , TS 36.143

Environment

ETS 300 019

EMC

EN 301 489
*Carrier Count

EGSM900 Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

29dBm

32dBm

NA

NA

29dBm

35dBm

NA

NA

29dBm

38dBm

NA

NA

16

28dBm

40dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Aug 25 2010 8:49AM

227

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH100020/211

Nexus FT Single Band 900MHz

RH100020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN
connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

880-915 MHz

Frequency Band DL

925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite Power +40dBm* (Multi-carrier GSM or EDGE)

Instantaneous Bandwidth

35 MHz

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by Remote Control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg. (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETS 300 609-4

Environment

ETS 300 019

EMC

EN 301 489
*Carrier Count

EGSM900 Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

29dBm

32dBm

NA

NA

29dBm

35dBm

NA

NA

29dBm

38dBm

NA

NA

16

28dBm

40dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 18 2010 6:55AM

228

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH200020/101

Nexus FT Single Band 1800MHz

RH200020/101 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1785 MHz

Frequency Band DL

1805-1880 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)

Instantaneous Bandwidth

75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by Remote Control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg. (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETS 300 609-4, TS 25.143 , TS 36.143

Environment

ETS 300 019

EMC

EN 301 489
*Carrier Count

DCS1800 Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

35dBm

38dBm

NA

NA

34dBm

40dBm

NA

NA

31dBm

40dBm

NA

NA

16

28dBm

40dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 18 2010 6:57AM

229

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH200020/211

Nexus FT Single Band 1800MHz

RH200020/211 is suitable for GSM, WCDMA and LTE applications. It is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN
connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1785 MHz

Frequency Band DL

1805-1880 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite Power +40dBm applicable for GSM, WCDMA and LTE *( Multi-carrier GSM or EDGE)

Instantaneous Bandwidth

75 MHz, EVM<5% , PCDE< -47dB, ACCR> 51dB[HSDPA+], EVM<7% , ACCR> 53dB[LTE]

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by Remote Control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg. (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETS 300 609-4

Environment

ETS 300 019

EMC

EN 301 489
*Carrier Count

DCS1800 Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

35dBm

38dBm

NA

NA

34dBm

40dBm

NA

NA

31dBm

40dBm

NA

NA

16

28dBm

40dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:10AM

230

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH201022/101

Nexus FT Dual Band 1800/900 MHz

RH201022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1785, 880-915 MHz

Frequency Band DL

1805-1880, 925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Output Power DL

Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Output Power DL 2

Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETSI EN 300 609-4

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


*Carrier Count

EGSM900 Power Per Carrier

EGSM900 Composite Power

DCS1800 Power Per Carrier

DCS1800 Composite Power

29dBm

32dBm

35dBm

38dBm

29dBm

35dBm

34dBm

40dBm

29dBm

38dBm

31dBm

40dBm

16

28dBm

40dBm

28dBm

40dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:35AM

231

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH201022/211

Nexus FT Dual Band 1800/900 MHz

RH201022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each
band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1785, 880-915 MHz

Frequency Band DL

1805-1880, 925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Output Power DL

Maximum Composite Power +40dBm applicable for 1800MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Output Power DL 2

Maximum Composite Power +40dBm applicable for 900MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETSI EN 300 609-4

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


*Carrier Count

EGSM900 Power Per Carrier

EGSM900 Composite Power

DCS1800 Power Per Carrier

DCS1800 Composite Power

29dBm

32dBm

35dBm

38dBm

29dBm

35dBm

34dBm

40dBm

29dBm

38dBm

31dBm

40dBm

16

28dBm

40dBm

28dBm

40dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:38AM

232

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH300020/101

Nexus FT 1900 MHz Single Band

RH300020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850 1910 MHz

Frequency Band DL

1930 - 1990 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite power 43 dBm

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 15 and 24

Environment
EMC
*Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

16

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

233

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH300020/211

Nexus FT 1900 MHz Single Band

RH300020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850 1910 MHz

Frequency Band DL

1930 - 1990 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite power 43 dBm

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 15 and 24

Environment
EMC
*Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

16

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

234

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH304022/101

Nexus FT Dual Band PCS/Cellular

RH304022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 824-849 MHz

Frequency Band DL

1930-1990, 869-894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (1900 MHz, Downlink , Composite)

Output Power DL 2

+43 dBm (800 MHz, Downlink , Composite)

Instantaneous Bandwidth

65MHz (PCS), 25MHz (Cellular)

Intermodulation 9KHz - 1 GHz

<-13dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 280 (18.3 x 20.9 x 12)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 24, FCC part 22

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 6:14PM

235

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH304022/211

Nexus FT Dual Band PCS/Cellular

RH304022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 824-849 MHz

Frequency Band DL

1930-1990, 869-894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (1900 MHz, Downlink , Composite)

Output Power DL 2

+43 dBm (800 MHz, Downlink , Composite)

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 280 (18.3 x 20.9 x 12)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 24, FCC part 22

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 6:14PM

236

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH309022/101

Nexus FT Dual Band PCS/AWS

RH309022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 1710-1755 MHz

Frequency Band DL

1930-1990, 2110-2155 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (1900 MHz, Downlink , Composite)

Output Power DL 2

+43 dBm (2100 MHz, Downlink , Composite)*

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 24, FCC part 27

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 7:02PM

237

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH309022/211

Nexus FT Dual Band PCS/AWS

RH309022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 1710-1755 MHz

Frequency Band DL

1930-1990, 2110-2155 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (1900 MHz, Downlink , Composite)

Output Power DL 2

+43 dBm (2100 MHz, Downlink , Composite)*

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 24, FCC part 27

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 7:03PM

238

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH330020/101

Nexus FT 1900 MHz Including G-block Single Band

RH330020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850 1915 MHz

Frequency Band DL

1930 - 1995 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite power 43 dBm

Instantaneous Bandwidth

65MHz

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 15 and 24

Environment
EMC
*Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

16

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 6 2010 2:49AM

239

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH334022/101

Nexus FT Dual Band PCS/Cellular Including G-block

RH334022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1915, 824-849 MHz

Frequency Band DL

1930-1995, 869-894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (1900 MHz, Downlink , Composite)

Output Power DL 2

+43 dBm (800 MHz, Downlink , Composite)

Instantaneous Bandwidth

65MHz (PCS), 25MHz (Cellular)

Intermodulation 9KHz - 1 GHz

<-13dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 280 (18.3 x 20.9 x 12)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 24, FCC part 22

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 7:03PM

240

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH400020/101

Nexus FT 850 MHz Single Band

RH400020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

824 849 MHz

Frequency Band DL

869 894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite power 43 dBm

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 22

Environment
EMC
*Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

29dBm

32dBm

37dBm

43dBm

29dBm

35dBm

34dBm

43dBm

29dBm

38dBm

16

31dBm

43dBm

28dBm

40dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

241

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH400020/211

Nexus FT 850 MHz Single Band

RH400020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

824 849 MHz

Frequency Band DL

869 894 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum Composite power 43 dBm

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 22

Environment
EMC
*Carrier Count

Power Per Carrier FCC

Composite Power FCC

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

29dBm

32dBm

37dBm

43dBm

29dBm

35dBm

34dBm

43dBm

29dBm

38dBm

16

31dBm

43dBm

28dBm

40dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

242

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH500020/101

Nexus FT Single Band 800iDEN

RH500020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

806 824 MHz

Frequency Band DL

851 869 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (45 70 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

+43 dBm (iDEN800, Downlink , Quad BR)

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 15, Part 90

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 17 2009 10:06AM

243

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH500020/211

Nexus FT Single Band 800iDEN&Public Safety

RH500020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

806 824 MHz

Frequency Band DL

851 869 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (45 70 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

+43 dBm (iDEN800, Downlink , Quad BR)

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR 47 Part 15, Part 90

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

244

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH600020/101

Nexus FT Single Band 2100MHz UMTS

RH600020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

1920-1980 MHz

Frequency Band DL

2110-2170 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum composite power +43dBm*

Instantaneous Bandwidth

60 MHz

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ESTI EN 301 908-11

Environment

ETS 300 019

EMC

ETS 300 489-1


*Carrier Count

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:21AM

245

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH600020/211

Nexus FT Single Band 2100MHz UMTS

RH600020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1920-1980 MHz

Frequency Band DL

2110-2170 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum composite power +43dBm*

Instantaneous Bandwidth

60 MHz

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ESTI EN 301 908-11

Environment

ETS 300 019

EMC

ETS 300 489-1


*Carrier Count

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:25AM

246

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH601022/101

Nexus FT Dual Band 900 and 2100 MHz

RH601022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1920-1980, 880-915 MHz

Frequency Band DL

2110-2170, 925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Output Power DL

Maximum composite power 2100 MHz UMTS +43dBm*

Output Power DL 2

Maximum Composite Power +40dBm applicable for 900 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETSI EN 300 609-4 and EN 301 908-11

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


*Carrier Count

EGSM900 Power Per Carrier

EGSM900 Composite Power

WCDMAS 2100 Power Per


Carrier

WCDMAS 2100 Composite


Power

29dBm

32dBm

40dBm

43dBm

29dBm

35dBm

37dBm

43dBm

29dBm

38dBm

34dBm

43dBm

16

28dBm

40dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jan 10 2011 11:04AM

247

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH601022/211

Nexus FT Dual Band EGSM900 & WCDMA2100

RH601022/211 is AC powered, with two duplexed 7/16 DIN connector RF ports, one each band and two RX diversity 7/16 DIN connector RF ports, one for each
band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1920-1980, 880-915 MHz

Frequency Band DL

2110-2170, 925-960 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Output Power DL

Maximum composite power WCDMA2100 +43dBm*

Output Power DL 2

Maximum composite power EGSM900 +40 dBm*

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETSI EN 300 609-4 and EN 301 908-11

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


*Carrier Count

EGSM900 Power Per Carrier

EGSM900 Composite Power

WCDMAS 2100 Power Per


Carrier

WCDMAS 2100 Composite


Power

29dBm

32dBm

40dBm

43dBm

29dBm

35dBm

37dBm

43dBm

29dBm

38dBm

34dBm

43dBm

16

28dBm

40dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 6:12PM

248

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH602022/101

Nexus FT Dual Band 1800 and 2100 MHz

RH602022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1920-1980, 1710-1785 MHz

Frequency Band DL

2110-2170, 1805-1880 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

20 dB (45 65 dB)

Gain Adjustment Range UL

20 dB (35 55 dB)

Gain Step Resolution

1 dB

Output Power DL

Maximum composite power 2100 MHz UMTS +43dBm*

Output Power DL 2

Maximum Composite Power +40dBm applicable for 1800 MHz GSM, WCDMA and LTE *( Multi-carrier GSM or
EDGE)

Instantaneous Bandwidth

Full Band

Intermodulation 9KHz - 1 GHz

<-36 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-30 dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25 C to +55 C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

ETSI EN 300 609-4 and EN 301 908-11

Environment

ETS 300 019

EMC

ETS 300 489-1


*Carrier Count

DCS1800 Power Per Carrier

DCS1800 Composite Power

WCDMA 2100 Power Per


Carrier

WCDMA 2100 Composite Power

35dBm

38dBm

40dBm

43dBm

34dBm

40dBm

37dBm

43dBm

31dBm

40dBm

34dBm

43dBm

12

29dBm

40dBm

32dBm

43dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Dec 13 2010 3:48AM

249

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH700030/101

Nexus FT Single Band 700MHz for Public Safety (PS) and D


block

Nexus FT 700 MHz Public Safety 20W, AC Pwr,WDM Fiber donor port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

PS: 788 to 805 MHz (includes upper D block)

Frequency Band DL

PS: 758 to 775 MHz (includes upper D block)

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

45 - 70 dB

Gain Adjustment Range UL

35 - 60 dB

Gain Step Resolution

1dB

Band 1 Output Power at Antenna Port

43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Instantaneous Bandwidth

17 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Type

110 - 230 VAC

Power Consumption

210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465x530x195 (18 x 20.9 x 8.3)

Weight kg(lbs)

23 kg (50.7 lbs)

RF Connectors

7/16 DIN Female

Optical Connectors

FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +55C

Ingression Protection

IP-65 (NEMA4)

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 15,27,90

Environment

GR-36-CORE

EMC

FCC CFR47 Part 15, 27


*Carrier Count

Power Per Carrier

Composite Power

NA

NA

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 2 2010 3:55PM

250

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH705032/101

Nexus FT Dual Band 700MHz for Public Safety (PS) and D


block /800iDEN

RH705032/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

788 to 805 MHz (includes upper D block), 806 - 824 MHz

Frequency Band DL

758 to 775 MHz (includes upper D block), 851 - 869 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

43 dBm (758 to 773 MHz), 40 dBm (773 to 775 MHz)

Output Power DL 2

+43 dBm (iDEN800, Downlink , Quad BR)

Instantaneous Bandwidth

17MHZ (700 PS)

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 15, FCC part 90

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Oct 28 2010 4:15PM

251

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH770020/101

Nexus FT Single Band 700MHz LTE (A,B,C AND UPPER C


BLOCKS)

Nexus FT 700 MHz LTE 20W, AC Pwr,WDM Fiber donor port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)

Frequency Band DL

A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

45 - 70 dB

Gain Adjustment Range UL

35 - 60 dB

Gain Step Resolution

1dB

Band 1 Output Power at Antenna Port

43 dBm

Instantaneous Bandwidth

Upper Band 11 MHz, lower Band 18 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Type

110 - 230 VAC

Power Consumption

210 W typical, 250 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465x530x195 (18 x 20.9 x 8.3)

Weight kg(lbs)

23 kg (50.7 lbs)

RF Connectors

7/16 DIN Female

Optical Connectors

FC-APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

-25C to +55C

Ingression Protection

IP-65 (NEMA4)

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 15,27,90

Environment

GR-36-CORE

EMC

FCC CFR47 Part 15, 27


*Carrier Count

Power Per Carrier

Composite Power

NA

NA

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

31dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Mar 29 2010 8:38AM

252

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH777722/251

Nexus FT 700 MHz MIMO

RH777722/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

lower A, B and C blocks (698MHz-716MHz), upper C block (776MHz-787MHz)

Frequency Band DL

A, B and C blocks (728MHz-746MHz), upper C block (746MHz-757MHz)

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (700 MHz, Downlink , Composite Channel A)

Output Power DL 2

+43 dBm (700 MHz, Downlink , Composite Channel B)

Instantaneous Bandwidth

Upper Band 11 MHz, lower Band 18 MHz

Intermodulation 9KHz - 1 GHz

<-13dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 280 (18.3 x 20.9 x 12)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR47 Parts 15,27,90

Environment
EMC

FCC CFR47 Part 15, 27,90


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

31dBm

43dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Apr 1 2011 12:04PM

253

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH805022/101

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

RH805022/101 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

806-824, 896-902 MHz

Frequency Band DL

851-869, 935-941 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (iDEN800, Downlink , Quad BR)

Output Power DL 2

+43 dBm (iDEN800, Downlink , Quad BR)

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 15, FCC part 90

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 6:46PM

254

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH805022/211

Nexus FT Dual Band 900iDEN/800iDEN&Public Safety

RH805022/211 is AC powered, with 4 duplexed 7/16 DIN connector RF ports to support main and RX diversity ports in each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

806-824, 896-902 MHz

Frequency Band DL

851-869, 935-941 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm (iDEN800, Downlink , Quad BR)

Output Power DL 2

+43 dBm (iDEN800, Downlink , Quad BR)

Instantaneous Bandwidth

NA

Intermodulation 9KHz - 1 GHz

NA

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 310 (18.3 x 20.9 x 12.3)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 15, FCC part 90

Environment

ETS 300 019 -2.4E

EMC

ETS 300 489-1


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 1 2010 7:02PM

255

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH900020/101

Nexus FT Single Band AWS

RH900020/101 is AC powered, with one duplexed 7/16 DIN connector RF port


ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1755 MHz

Frequency Band DL

2110-2155 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum composite power +43dBm*

Instantaneous Bandwidth

45 MHz

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 27

Environment

ETS 300 019

EMC

ETS 300 489-1


*Carrier Count

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Jun 21 2010 7:24PM

256

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH900020/211

Nexus FT Single Band AWS

RH900020/211 is AC powered, with one duplexed 7/16 DIN connector RF port and one RX diversity 7/16 DIN connector RF port
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1755 MHz

Frequency Band DL

2110-2155 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Band 1 Output Power at Antenna Port

Maximum composite power +43dBm*

Instantaneous Bandwidth

45 MHz

Intermodulation 9KHz - 1 GHz

<-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

NA

Alarm

LED and by remote control

Power Supply Type

115/230 VAC

Power Consumption

210 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 211 (18 x 20.9 x 8.3)

Weight kg(lbs)

< 25 kg (55 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65/NEMA4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC Part 27

Environment

ETS 300 019

EMC

ETS 300 489-1


*Carrier Count

Power Per Carrier

Composite Power

Power Per Carrier ETSI

Composite Power ETSI

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

32dBm

43dBm

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated:

257

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Single and Dual Band

RH909022/251

Nexus FT 2100 MHz AWS MIMO

RH909022/251 is AC powered, with two duplexed 7/16 DIN connector RF ports, one for each band
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1710-1755 MHz

Frequency Band DL

2110-2155 MHz

Fiber Link Budget

10 dBo

Gain Adjustment Range DL

25 dB (45 70 dB)

Gain Adjustment Range UL

25 dB (35 60 dB)

Gain Step Resolution

1 dB

Output Power DL

+43 dBm ( Downlink , Composite Channel A)

Output Power DL 2

+43 dBm (Downlink , Composite Channel B)

Instantaneous Bandwidth

45 MHz

Intermodulation 9KHz - 1 GHz

<-13dBm

Intermodulation 1GHz - 12.75 GHz ETSI

<-13dBm

Alarm

LED and by remote control

Power Supply Options

115/230 VAC

Power Consumption

420 W Typical

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

465 x 530 x 280 (18.3 x 20.9 x 12)

Weight kg(lbs)

< 44 kg (96 lbs)

RF Connectors

7/16 DIN female

Optical Connectors

FC/APC

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

- 25C to + 55C

Ingression Protection

IP65 / NEMA 4

APPROVALS AND TESTS


Safety

UL, EN 60950, ETL

Radio

FCC CFR47 Parts 15,27,90

Environment

ETD300 489-1

EMC

FCC CFR47 Part 15, 27,90


Carrier Count *

Power Per Carrier

Composite Power

Power Per Carrier

Composite Power

40dBm

43dBm

NA

NA

37dBm

43dBm

NA

NA

34dBm

43dBm

NA

NA

12

31dBm

43dBm

NA

NA

NA

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Oct 19 2011 6:56PM

258

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Coverage Products

POWERWAVE

Nexus FT Rack Mounts

In-Building and Outdoor DAS Products


Commercial

Title

Frequency Band Frequency


(UL)
Band (DL)

Gain Adjustment
Range DL

Part Number

Nexus Dual Band


Repeaters

1850-1910,
824-849 MHz

1930-1990,
869-894 MHz

25 (45 - 70) dB

RH304022/03A

260

Nexus Dual Band


Repeaters

1850-1910,
806-824 MHz

1930-1990,
851-869 MHz

25 (45 - 70) dB

RH305022/03A

261

Nexus Dual Band


Repeaters

1850-1910,
896-902 MHz

1930-1990,
935-941 MHz

25 (45 - 70) dB

RH308022/03A

262

259

Page

POWERWAVE

Nexus FT Rack Mounts

RH304022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 850, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 824-849 MHz

Frequency Band DL

1930-1990, 869-894 MHz

Fiber Link Budget

n/a

Gain Adjustment Range DL

25 (45 - 70) dB

Gain Adjustment Range UL

25 (35 - 60) dB

Gain Step Resolution

1 dB

Output Power DL

20 W

Output Power DL 2

20 W

Instantaneous Bandwidth

60 / 25 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Options

110 - 230 VAC

Power Consumption

420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

266 x 483 x 551 (10.5 x 19 x 21.7)

Weight kg(lbs)

30 (66)

RF Connectors

SMA (Donor), N (Service)

Optical Connectors

n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

0C to +55C

Ingression Protection

IP50

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 22, 24

Environment

ETS 300 019

EMC

FCC CFR47 Part 22, 24


Carrier Count

Power Per Carrier

Composite Power

40 dBm

43 dBm

37 dBm

43 dBm

34 dBm

43 dBm

12

32 dBm

43 dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 10 2010 6:41PM

260

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Rack Mounts

RH305022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 800iPS, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 806-824 MHz

Frequency Band DL

1930-1990, 851-869 MHz

Fiber Link Budget

n/a

Gain Adjustment Range DL

25 (45 - 70) dB

Gain Adjustment Range UL

25 (35 - 60) dB

Gain Step Resolution

1 dB

Output Power DL

20 W

Output Power DL 2

20 W

Instantaneous Bandwidth

60 / 18 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Options

110 - 230 VAC

Power Consumption

420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

266 x 483 x 551 (10.5 x 19 x 21.7)

Weight kg(lbs)

30 (66)

RF Connectors

SMA (Donor), N (Service)

Optical Connectors

n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

0 to +55C

Ingression Protection

IP50

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 24, 90

Environment

ETS 300 019

EMC

FCC CFR47 Parts 24, 90


Carrier Count

Power Per Carrier

Composite Power

40 dBm

43 dBm

37 dBm

43 dBm

34 dBm

43 dBm

12

32 dBm

43 dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 10 2010 6:42PM

261

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Nexus FT Rack Mounts

RH308022/03A

Nexus Dual Band Repeaters

Nexus FT Rack Mount Dual Band 1900 / 900i, Simplex SMA donor ports and duplexed N service ports per band.
ELECTRICAL SPECIFICATIONS
Frequency Band UL

1850-1910, 896-902 MHz

Frequency Band DL

1930-1990, 935-941 MHz

Fiber Link Budget

n/a

Gain Adjustment Range DL

25 (45 - 70) dB

Gain Adjustment Range UL

25 (35 - 60) dB

Gain Step Resolution

1 dB

Output Power DL

20 W

Output Power DL 2

20 W

Instantaneous Bandwidth

60 / 6 MHz

Intermodulation 9KHz - 1 GHz

-13 dBm

Intermodulation 1GHz - 12.75 GHz ETSI

-13 dBm

Alarm

LED/SNMP

Power Supply Options

110 - 230 VAC

Power Consumption

420 W typical, 500 W Max

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

266 x 483 x 551 (10.5 x 19 x 21.7)

Weight kg(lbs)

30 (66)

RF Connectors

SMA (Donor), N (Service)

Optical Connectors

n/a -units require ORD for optical to RF conversion

ENVIRONMENTAL SPECIFICATIONS
Temperature Range

0 to +55

Ingression Protection

IP50

APPROVALS AND TESTS


Safety

UL60950-1

Radio

FCC CFR47 Parts 24, 90

Environment

ETS 300 019

EMC

FCC CFR47 Parts 24, 90


Carrier Count

Power Per Carrier

Composite Power

40 dBm

43 dBm

37 dBm

43 dBm

34 dBm

43 dBm

12

32 dBm

43 dBm

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: Nov 10 2010 6:41PM

262

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Repeater Remote
Management

Powerwaves IP/SNML/GPS (ISG) communication interface


module provides remote operation, control and monitoring
of Powerwaves repeater networks reducing the need for
site visits through a very cost-effective and reliable IP
and SNMP connection. The ISG interface modules improve
the repeaters remote access offering Ethernet and packet
switched connections and a Web craft terminal. The ISG
interface can manage numerous repeaters and when
integrated with Powerwaves NetWay Vision, offers a
complete solution for network management.

Coverage Products

Repeater Remote Management

POWERWAVE

IP/SNMP/GPS Repeater Remote Management Interface


Modem
Frequencies

Title

Power Output

GPS Receiver

Part Number Page

Base Station
Management
Interface

N/A

N/A

UA115 04/84,
UA115 04/85

265

IP/SNMP/GPS:
Ethernet Interface
Upgrade Option

+/- 6.5 VDC @ 2A


N/A
(supplied by repeater)

N/A

UA107 62/1

267

IP/SNMP/GPS:
12 channel L1 (1575.42
900/1800 Dual Mode +/- 6.5 VDC @ 2A
900 / 1800 MHz MHz), position accuracy ~ UA107 62/2
Wireless GPRS
(supplied by repeater)
5m
Packet Data Interface

268

IP/SNMP/GPS:
12 channel L1 (1575.42
850/1900 Dual Mode +/- 6.5 VDC @ 2A
850 / 1900 MHz MHz), position accuracy ~ UA107 62/3
Wireless CDMA
(supplied by repeater)
5m
Packet Data Interface

269

IP/SNMP/GPS:
12 channel L1 (1575.42
850/1900 Dual Mode +/- 6.5 VDC @ 2A
850 / 1900 MHz MHz), position accuracy ~ UA107 62/4
(supplied by repeater)
Wireless GPRS
5m
Packet Data Interface

270

698 to 1000
MHz, 1700 to
2000 MHz

264

UA115 04/84, UA115 04/85

Coverage Solutions

Introduction:
The Base Station Management Interface (BSMI) is multi-band power limiter and monitor. It is a component of head-end fiber
distributed antenna system (DAS) systems, and provides the interface and level management of the DAS donor RF signals. The
BSMI is typically used with the Powerwave Fiber Base Unit (FBU) which converts optical to RF signals.

Features:

Provides downlink load balancing and power limiting for DAS (distributed antenna systems) with multi-base station or multioperator configurations

Technology agnostic - can be used to support all commercial 2G/3G/4G technologies

Each module supports 4 independent uplink and downlink paths

Two paths UL/DL(uplink and downlink) are dedicated for 698MHz-1GHz and two paths are dedicated for 1700-2200 MHz

Both UL and DL paths can be adjusted from 0-15dB in 1dB steps

IP42 rated with -10C to +45C operating range

Maximum DL RF input is +40dBm and maximum uplink input is 0 dBm

Two Ethernet interfaces support local and remote access

Supports SNMP traps and is fully supported with Netway Vision

Level adjustments can be made locally or remotely-reducing site trips

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Oct 27 2011 8:22AM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

265

UA115 04/84, UA115 04/85

Coverage Solutions

ELECTRICAL SPECIFICATIONS
698 to 1000 MHz (2 UL/DL paths)

Frequency

1700 to 2200 MHz (2 UL/DL paths)


4 Uplink- 8 SMA Female

Number of RF Ports

4 Downlink -4 N Female/4 SMA Female


VSWR (All Ports)

1.5:1 Maximum (50 Ohm Impedance)

Downlink RF Input (RMS) No Damage

+ 45 dBm Maximum

Uplink RF Input (RMS) No Damage

+ 15 dBm Maximum

Downlink/Uplink Measurement Accuracy

+/- 1,0 dB

Uplink/Downlink Measurement Range

- To 15 dB in 1dB steps

Downlink to Uplink Isolation

140 dB Minimum

Downlink power Measurement


Bandwidth

Full Bandwidth High or Low Band

Uplink Power Measurement Bandwidth

200Hz

MECHANICAL SPECIFICATIONS
Form Factor

1 Rack Unit

Maximum Dimensions (Including


connector Protrusions)

Bottom

Dimensions, HxWxD, mm (in)

482.6x419.4x43.7mm(19.0x16.51x1.7)

Weight, with brackets, kg (lbs)

2.3 (5.0)

Operating Temperature

-10 to +50C

Maximum Power Dissipation

40 Watts

Packing weight, kg (lbs)

27.3 (60.0)

REGULATORY APPROVALS
FCC Part 15, Class B

EMI

FCC Part 22,24,90


EN60000-6-3 (Radiated Up to 10 GHz
EN55022
IEC 6100-4-2,3,4,6

EMC

IEC 60950-1

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Oct 27 2011 8:22AM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

266

POWERWAVE

UA107 62/1

Remote Repeater and DAS Management

IP/SNMP/GPS: Ethernet Interface Upgrade Option

Optional kit that provides wired Ethernet packet data interface for communication with Powerwaves Netway Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input

+6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies

NA

GPS Receiver

NA

Battery Backup

10 minute minimum (for communications)

Battery Change Options

Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

Operating Range

-25 C to +55 C ( repeater ambient temps)

Repeater Interface

Use existing communication ports

Modem and GPS Interface

NA

Operational Conditions

ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Non-Operational Conditions

ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Certifications

EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS)

NA

Repeater Management

Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode

IP Ethernet

Networks Supported

NA

Fallback Circuit Switched Mode

NA

Northbound Traffic

SNMP v1, v2c and http

Wireless Modem Type

NA

Network Management

NWM 3.2.2 and greater; local web interface

Maintenance Access (Local Craft Port)

10/100 BaseT Ethernet Port (DHCP managed) and RS232

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: May 11 2010 2:10AM

267

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

UA107 62/2

Remote Repeater and DAS Management

IP/SNMP/GPS: 900/1800 Dual Mode Wireless GPRS Packet Data


Interface

Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves NetWay Vision (NWV) and automated location tuning via GPS
for moving repeaters
ELECTRICAL SPECIFICATIONS
Power Input

+6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies

900 / 1800 MHz

GPS Receiver

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup

10 minute minimum (for communications)

Battery Change Options

Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

Operating Range

-25 C to +55 C ( repeater ambient temps)

Repeater Interface

Use existing communication and antenna ports

Modem and GPS Interface

Mezzanine Board

Operational Conditions

ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Non-Operational Conditions

ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Certifications

EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007)

PROCESSING
Automated Location Based Tuning (via GPS)

Up to 12 Repeaters

Repeater Management

Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode

GPRS and IP Ethernet

Networks Supported

NA

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Wireless Modem Type

Wavecom Quik series Extended (Q24 EX001)

Network Management

NWM 3.2.2 and greater; local web interface

Maintenance Access (Local Craft Port)

10/100 BaseT Ethernet Port (DHCP managed) and RS232

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: May 11 2010 2:13AM

268

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

UA107 62/3

Remote Repeater and DAS Management

IP/SNMP/GPS: 850/1900 Dual Mode Wireless CDMA Packet


Data Interface

Optional kit that provides CDMA wireless packet data interface for communication with Powerwaves NetWay Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input

+6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies

850 / 1900 MHz

GPS Receiver

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup

10 minute minimum (for communications)

Battery Change Options

Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

Operating Range

-25 C to +55 C ( repeater ambient temps)

Repeater Interface

Use existing communication and antenna ports

Modem and GPS Interface

Mezzanine Board

Operational Conditions

ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Non-Operational Conditions

ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Certifications

EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS)

Up to 12 Repeaters

Repeater Management

Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode

CDMA2000 1XRTT and IP ethernet

Networks Supported

Verizon

Fallback Circuit Switched Mode

NA

Northbound Traffic

SNMP v1, v2c and http

Wireless Modem Type

Wavecom Quik series (Q2438)

Network Management

NWM 3.2.2 and greater; local web interface

Maintenance Access (Local Craft Port)

10/100 BaseT Ethernet Port (DHCP managed) and RS232

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: May 11 2010 2:13AM

269

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

UA107 62/4

Remote Repeater and DAS Management

IP/SNMP/GPS: 850/1900 Dual Mode Wireless GPRS Packet Data


Interface

Optional kit that provides GPRS wireless packet data interface for communication with Powerwaves Netway Vision (NWV)
ELECTRICAL SPECIFICATIONS
Power Input

+6.5 VDC @ 2A (supplied by Repeater)

Modem Frequencies

850 / 1900 MHz

GPS Receiver

12 channel L1 (1575.42 MHz), position accuracy ~ 5 m

Battery Backup

10 minute minimum (for communications)

Battery Change Options

Continuous trickle or high charge

MECHANICAL SPECIFICATIONS
Dimensions HxWxD mm(in)

35 (1.38 in) x 185 (7.29 in) x 85 (3.35 in)

Operating Range

-25 C to +55 C ( repeater ambient temps)

Repeater Interface

Use existing communication and antenna ports

Modem and GPS Interface

Mezzanine Board

Operational Conditions

ETSI 300 019 Class 3.1 (Stationary) and Class 5.1 (Ground Vehicle Operations)

Non-Operational Conditions

ETSI 300 019 Class 2.3 (Transportation) and Class 1.1 (Storage)

Certifications

EN60950-1 (Safety), ETSI 301 489-1 (EMC), UL 60950-1 (2007), FCC (Part 15)

PROCESSING
Automated Location Based Tuning (via GPS)

Up to 12 Repeaters

Repeater Management

Up to 96 nodes in the Repeater network. This management upgrade requires Repeater software upgrade
with the latest Repeater software version. For EOL Repeater models this management option also requires
control unit hardware upgrade. Contact Powerwave for more information.

COMMUNICATIONS
Packet Data Mode

GPRS and IP Ethernet

Networks Supported

NA

Fallback Circuit Switched Mode

GSM

Northbound Traffic

SNMP v1, v2c and http

Wireless Modem Type

Wavecom Quik series Extended (Q24 EX001)

Network Management

NWM 3.2.2 and greater; local web interface

Maintenance Access (Local Craft Port)

10/100 BaseT Ethernet Port (DHCP managed) and RS232

ISG Integration Options: Standard Repeaters, Compact Repeaters, Maritime Repeaters, In-Train Repeaters and Optical Converter Modules (OCMs).
All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

Updated: May 11 2010 2:15AM

270

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Antenna Products

A Tradition of Quality Since 1946

Broadband

Powerwave delivers antennas to customers around the


world, offering solutions for all mobile telephony standards.
Our designers and engineers build on years of experience;
we have developed and manufactured top-quality antennas
since 1946 from our core platform formerly under the
industry leading Allgon brand name.

Single and Dual Band

State of the Art Antennas are the Key


to Reducing Total Cost of Ownership
The Powerwave broadband multiband antennas offer
network operators fast and successful roll-out of next
generation networks with excellent RF-performance. Our
antennas are designed to overcome 3G and 4G deployment
challenges, such as space and installation issues as well
as various co-siting scenarios. The Powerwave broadband
antenna technology simplifies logistics for network
operators active in multiple markets.

iRET
iDiplexer
Remote Electrical Tilt (RET)
Indoor
Clean Site Solutions
Mounting Solutions

Power wave

Broadband Antennas

The Powerwave broadband antenna design is based on


a patented stacked aperture-coupled patch technology,
which provides high isolation performance and a wide
voltage standing wave ratio (VSWR) bandwidth. The
antennas have superior radiation patterns due to a unique
reflector design that provide a very small variation of the
-3dB horizontal beam width over the frequency band as
well as a high front-to-back ratio. Powerwave broadband
antennas come with remote electrical tilt (RET) in AISG 1.1
and AISG 2.0, and manually adjustable electrical tilt (MET)
for tuning flexibility of tilt angles. This design ensures the
highest possible cross-polar discrimination value.

Broadband Antennas

POWERWAVE

Broadband Antennas

Single Broadband Antennas


Cross Polarized

Page

High Broadband Cross Polarized Antennas, 1710-2170 MHz

274

Low Broadband Cross Polarized Antennas, 806-960 MHz

305

Low Broadband Cross Polarized Antennas, 698-894 MHz

343

Dual Broadband Antennas


Cross Polarized

Page

Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

351

Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

361

Triple Broadband Antennas


Cross Polarized

Page

Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

368

Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz

375

273

Single Broadband Antennas

POWERWAVE

High Broadband Cross Polarized Antennas, 1710-2170 MHz

Single Broadband Antennas


Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

65

18.1/16

1.3m (4'3")

5701.00

276

65

18.1/16

1.3m (4'3")

5701.02

277

65

18.1/16

1.3m (4'3")

5701.06

278

65

18.1/16.2

0-8

1.3m (4'3")

5721.00

279

65

18.1/16

2-10

1.3m (4'3")

5721.02

280

65

19.5/17.4

0.5-5

2.0m (66)

5722.00

281

65

15.8/13.7

0.7m (23)

7700.00

282

65

15.8/13.7

0.7m (23)

7700.06

283

65

18.1/16

1.3m (4'3")

7701.00

284

65

18.1/16

1.3m (4'3")

7701.00A

285

65

18.1/16

1.3m (4'3")

7701.02

286

65

18.1/16

1.3m (4'3")

7701.02A

287

65

18.1/16

1.3m (4'3")

7701.06

288

65

15.6/13.5

0-16

0.7m (23)

7720.00

289

65

18.3/16.2

0-8

1.3m (4'3")

7721.00

290

65

18.3/16.2

0-8

1.3m (4'3")

7721.00A

291

65

18.1/16

2-10

1.3m (4'3")

7721.02

292

65

18.1/16

2-10

1.3m (4'3")

7721.02A

293

65

18/15.9

6-14

1.3m (4'3")

7721.06

294

65

18.1/16

2-10

1.3m (4'3")

7721.10

295

65

18.3/16.2

0-8

1.3m (4'3")

7721.40

296

274

Page

Single Broadband Antennas

POWERWAVE

High Broadband Cross Polarized Antennas, 1710-2170 MHz

Single Broadband Antennas


Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

65

19.5/17.4

0.5-5

2.0m (66)

7722.00

297

65

19.5/17.4

0.5-5

2.0m (66)

7722.00A

298

90

14.1/12.0

0-16

0.7m (23)

7735.00A

299

90

16.7/14.6

0-8

1.3m (43)

5740.00

300

90

16.7/14.6

0-8

0.7m (23)

7740.00A

301

90

19.5/17.4

0.5-5

2.0m (66)

7745.00A

302

65

17.7/15.6,
0-8
17.9/15.8, 18.1/16

1.3m (43)

5760.00

303

65

17.7/15.6,
17.7/15.6,
17.9/15.8

1.3m (43)

5760.02

304

2-10

275

Page

POWERWAVE

5701.00

Single Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.2/16.1

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>20

>20

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20, typical>-18

Electrical down tilt ()

First null fill (dB)

>20

>-20, typical>-18

>-20, typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIM Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:17AM

276

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

5701.02

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 2
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.4/15.3

17.8/15.7

18.1/16

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>19

>19

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-22,typical>-18

Electrical down tilt ()

First null fill (dB)

>19

>-22,typical>-18

>-22,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>26

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:18AM

277

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

5701.06

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 6
LENGTH: 1.3m(43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.8/15.7

18.1/16

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>18

>18

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0

Electrical down tilt ()

First null fill (dB)

>18

>-26,typical>-20

>-26,typical>-20

>-26,typical>-20

Vertical beam squint ()

<0.5

<0.5

<0.5

Front to back ratio (dB) 180 30 copolar

>29

>29

>29

Front to back ratio (dB) 180 30 total power

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:20AM

278

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

5721.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Gain (dBi/dBd)
Polarization

Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>18,18,16,16,14 @ 0,2,4,6,8

>18,18,16,16,14 @ 0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24 typical >-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,16,16,14 @ 0,2,4,6,8

>-24 typical >-18

>-24 typical >-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5(43x6x3)

Mounting

Pre Mounted Standard Brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6.0 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

56 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 14 2011 2:25AM

279

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

5721.02

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>19,19,18,17,16@2,4,6,8,10

>20,20,19,19,18@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>20,20,19,19,18@2,4,6,8,10

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:25AM

280

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5722.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-5.5
LENGTH: 2.0m (66)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19/16.9

19.2/17.1

19.5/17.4

Gain (dBi/dBd)
Polarization

Dual Slant 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

65

Vertical beam width, -3 dB ()

4.7

4.4

4.2

>18,18,18,16,16,14@0,1,2,3,4,5

>18,18,18,16,16,14@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20,typical>-16

Electrical down tilt ()

0 - 5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,18,16,16,14@0,1,2,3,4,5

>-20,typical>-16

>-20,typical>-16

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>19

>19

>21

Cross polar discrimination (XPD) 60 (dB)

>20

>17

>12

<-150

<-150

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x167x89.5 (64x6x3)

Mounting

Pre mounted standard brackets

Weight, with brackets, kg (lbs)

14 (31)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

416

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2105x200x200 (611x8x8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:07AM

281

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7700.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.8/13.7
TILT: 0
LENGTH: 0.7m (23)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

15.1/13.0

15.5/13.4

15.8/13.7

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

14.7

13.8

12.8

Side lobe suppression, vertical 1st upper (dB)

>19

>19

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20,typical>-18

Vertical beam width, -3 dB ()


Electrical down tilt ()

First null fill (dB)

>19

>-20,typical>-18

>-20,typical>-18

Vertical beam squint ()

0.6

0.6

0.6

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>26

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>19

Cross polar discrimination (XPD) 60 (dB)

>17

>15

>11

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

709x167x89.5 (23x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

6.7 (14.8)

Weight, without brackets, kg (lbs)

3 (6.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

133

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

880x200x200 (211x 8x 8)

Shipping weight, kg (lbs)

10 (22)

RET

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08189 Rev A Updated: Dec 2 2010 3:44AM

282

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7700.06

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.8/13.7
TILT: 6
LENGTH: 0.7m (23)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

15.0/12.9

15.5/13.4

15.8/13.7

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

14.7

13.8

12.8

Side lobe suppression, vertical 1st upper (dB)

>17

>17

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-26,typical>-20

Vertical beam width, -3 dB ()


Electrical down tilt ()

First null fill (dB)

>17

>-26,typical>-20

>-26,typical>-20

Vertical beam squint ()

0.6

0.6

0.6

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>26

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>19

Cross polar discrimination (XPD) 60 (dB)

>17

>15

>11

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

709x167x89.5 (23x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

6.7 (14.8)

Weight, without brackets, kg (lbs)

3 (6.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

133

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

880x200x200 (211x 8x 8)

Shipping weight, kg (lbs)

10 (22)

RET

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7700.06 Updated: Dec 2 2010 3:44AM

283

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

7701.00

POLARIZATION: X-pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.9/15.8

18.2/16.1

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>20

>20

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20,typical>-18

Electrical down tilt ()

First null fill (dB)

>20

>-20,typical>-18

>-20,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08191 Rev A Updated: Dec 2 2010 3:47AM

284

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7701.00A

Single Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.2/16.1
TILT: 0
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.2/16.1

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>20

>20

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20, typical>-18

Electrical down tilt ()

First null fill (dB)

>20

>-20, typical>-18

>-20, typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIM Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Jul 05 2010 Updated: Mar 3 2011 1:18AM

285

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7701.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 2
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.4/15.3

17.8/15.7

18.1/16

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>19

>19

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-22,typical>-18

Electrical down tilt ()

First null fill (dB)

>19

>-22,typical>-18

>-22,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>26

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08192 Rev A Updated: Dec 2 2010 3:48AM

286

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7701.02A

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16
TILT: 2
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.4/15.3

17.8/15.7

18.1/16

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>19

>19

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-22,typical>-18

Electrical down tilt ()

First null fill (dB)

>19

>-22,typical>-18

>-22,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>26

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to+60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:19AM

287

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7701.06

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 6
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.8/15.7

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.2

6.7

6.4

Side lobe suppression, vertical 1st upper (dB)

>18

>18

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-26,typical>-20

Electrical down tilt ()

First null fill (dB)

>18

>-26,typical>-20

>-26,typical>-20

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>29

>29

>29

Front to back ratio (dB) 180 30 total power

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>17

>14

>11

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08193 Rev A Updated: Nov 29 2010 4:18AM

288

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7720.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.6/13.5
TILT: 0-16
LENGTH: 0.7m (23)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

15.0/12.9

15.1/13.0

15.6/13.5

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

14.1

13.5

12.5

>17,16,16,15,15@0,4,8,12,16

>17,16,16,15,15@0,4,8,12,16

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.5

<1.5

<1.5
>-29,typical>-25

Vertical beam width, -3 dB ()


Electrical down tilt ()

0-16

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>17,16,16,15,15@0,4,8,12,16

>-29,typical>-25

>-29,typical>-25

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>15

>18

>18

Cross polar discrimination (XPD) 60 (dB)

>15

>15

>13

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

709x167x89.5 (23x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

8.2 (18)

Weight, without brackets, kg (lbs)

4.5 (9.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

133

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

56 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

880x200x200 (211x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

8110.40, 8110.10

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08194 Rev A Updated: Sep 14 2011 2:24AM

289

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>18,18,16,16,14,@0,2,4,6,8

>18,18,16,16,14,@0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,16,16,14,@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6.0 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.40, 8110.10

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 4:38AM

290

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.00A

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Gain (dBi/dBd)
Polarization

Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>18,18,16,16,14 @ 0,2,4,6,8

>18,18,16,16,14 @ 0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24 typical >-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,16,16,14 @ 0,2,4,6,8

>-24 typical >-18

>-24 typical >-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5(43x6x3)

Mounting

Pre Mounted Standard Brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6.0 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 1:22AM

291

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.02

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>19,19,18,17,16@2,4,6,8,10

>20,20,19,19,18@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>20,20,19,19,18@2,4,6,8,10

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 5:16AM

292

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.02A

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>19,19,18,17,16@2,4,6,8,10

>20,20,19,19,18@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>20,20,19,19,18@2,4,6,8,10

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:26AM

293

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.06

Dual High Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 6-14
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.8/15.7

18.0/15.9

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.3

6.9

6.6

>19,19,18,17,16@6,8,10,12,14

>20,20,20,19,18@6,8,10,12,14

>20,20,20,19,18@6,8,10,12,14

>30

>30

>30

<2

<2

<2

>-24,typical>-18

>-24,typical>-18

>-24,typical>-18

Electrical down tilt ()

6-14

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Tracking, horizontal plane 60 (dB)
First null fill (dB)
Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.40, 8110.10

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08196 Rev A Updated: Dec 2 2010 5:29AM

294

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7721.10

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 2-10
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>19,19,18,17,16@2,4,6,8,10

>20,20,19,19,18@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>20,20,19,19,18@2,4,6,8,10

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

No pre-mounted bracket.

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.40, 8110.10

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Feb 7 2011 9:05AM

295

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

7721.40

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

>18,18,16,16,14 @ 0,2,4,6,8

>18,18,16,16,14 @ 0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,16,16,14 @ 0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

This is the connectur up version of 7721.00

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Top

Dimensions, HxWxD, mm(ft)

1309x167x89.5 mm (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

13.5 (29.7)

RET

8110.10,8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 2 2010 4:54AM

296

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7722.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-5.5
LENGTH: 2.0m (66)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19.0/16.9

19.2/17.1

19.5/17.4

Gain (dBi/dBd)
Polarization

Dual slant 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

65

Vertical beam width, -3 dB ()

4.7

4.4

4.2

>18,18,18,16,16,14,@0,1,2,3,4,5

>18,18,18,16,16,14,@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20,typical>-16

Electrical down tilt ()

0-5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,18,16,16,14,@0,1,2,3,4,5

>-20,typical>-16

>-20,typical>-16

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>19

>20

>21

Cross polar discrimination (XPD) 60 (dB)

>20

>17

>12

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x167x89.5 (64x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

14 (31)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

416

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2105x200x200 (611x8x8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08197 Rev A Updated: Dec 2 2010 5:31AM

297

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7722.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-5.5
LENGTH: 2.0m (66)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19/16.9

19.2/17.1

19.5/17.4

Gain (dBi/dBd)
Polarization

Dual Slant 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

65

Vertical beam width, -3 dB ()

4.7

4.4

4.2

>18,18,18,16,16,14@0,1,2,3,4,5

>18,18,18,16,16,14@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20,typical>-16

Electrical down tilt ()

0 - 5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,18,16,16,14@0,1,2,3,4,5

>-20,typical>-16

>-20,typical>-16

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>19

>19

>21

Cross polar discrimination (XPD) 60 (dB)

>20

>17

>12

<-150

<-150

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x167x89.5 (64x6x3)

Mounting

Pre mounted standard brackets

Weight, with brackets, kg (lbs)

14 (31)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

416

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2105x200x200 (611x8x8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / May 05 2010 Updated: Mar 3 2011 1:08AM

298

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7735.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.1/12.0
TILT: 0-16
LENGTH: 0.7m (23)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

13.6/11.5

13.8/11.7

14.1/12.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

86

86

87

14.7

13.4

12.2

>18,17,16,15,14@0,4,8,12,16

>18,17,16,15,14@0,4,8,12,16

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Vertical beam width, -3 dB ()


Electrical down tilt ()

0-16

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,17,16,15,14@0,4,8,12,16

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.8

0.8

0.8

Front to back ratio (dB) 180 30 copolar

>25

>25

>25

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>13

>13

>12

Cross polar discrimination (XPD) 60 (dB)

>10

>10

>10

IM3, 2xTx&43dBm (dBc)

-153

-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

709x167x89.5 (23x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

133

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

880x200x200 (211x8x8)

Shipping weight, kg (lbs)

13 (28.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08198 Rev A Updated: Dec 2 2010 5:32AM

299

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5740.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.7/14.6
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

16.2/14.1

16.4/14.3

16.7/14.6

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

86

86

86

Vertical beam width, -3 dB ()

7.1

6.6

6.3

>18,17,15,15,14@0,2,4,6,8

>18,17,15,15,14@0,2,4,6,8

30

30

30

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Tracking, horizontal plane 60 (dB)
First null fill (dB)

>18,17,15,15,14@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>29

>29

>29

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>14

>14

>12

Cross polar discrimination (XPD) 60 (dB)

>10

>10

>10

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

11.7 (25.7)

Weight, without brackets, kg (lbs)

8 (17.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

56 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

8110.10, 8110.40

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 14 2011 2:26AM

300

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

7740.00A

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.7/14.6
TILT: 0-8
LENGTH: 1.3m (43)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

16.2/14.1

16.4/14.3

16.7/14.6

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

86

86

86

Vertical beam width, -3 dB ()

7.1

6.6

6.3

>18,17,15,15,14@0,2,4,6,8

>18,17,15,15,14@0,2,4,6,8

30

30

30

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Tracking, horizontal plane 60 (dB)
First null fill (dB)

>18,17,15,15,14@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>29

>29

>29

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>14

>13

>12

Cross polar discrimination (XPD) 60 (dB)

>10

>10

>10

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

11.7 (25.7)

Weight, without brackets, kg (lbs)

8 (17.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200 (410x8x8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

8110.40. 8110.10

Brackets

7256.00A,7454.00,7455.00,7488.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / May 07 2010 Updated: Mar 3 2011 1:09AM

301

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7745.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 17.9/15.8
TILT: 0-5.5
LENGTH: 2.0m (66)

High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.5/15.4

17.6/15.5

17.9/15.8

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

86

86

86

Vertical beam width, -3 dB ()

4.7

4.5

4.2

>18,18,16,16,14,14,@0,1,2,3,4,5

>18,18,16,16,14,14,@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24,typical>-18

Electrical down tilt ()

0-5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>18,18,16,16,14,14,@0,1,2,3,4,5

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.3

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>29

>29

>29

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>14

>13

>12

Cross polar discrimination (XPD) 60 (dB)

>10

>10

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x167x89.5 (64x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

15.9 (35)

Weight, without brackets, kg (lbs)

10.4 (22.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

416

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2105x200x200 (611x8x8)

Shipping weight, kg (lbs)

18 (39.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08200 Rev A Updated: Dec 2 2010 5:33AM

302

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5760.00

Single Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16
TILT: 0-8
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>22,20,18,16,14@0,2,4,6,8

>22,20,18,16,14@0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>22,20,18,16,14@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x430x250 (48x13x9)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

8110.10, 8110.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 24 2011 2:41AM

303

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5760.02

Dual High Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.7/15.6

17.9/15.8

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

63

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>19,19,18,17,16@2,4,6,8,10

>19,19,18,17,16@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>19,19,18,17,16@2,4,6,8,10

>-27,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 1:11AM

304

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas


Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd

Tilt

Length

Part Number

Page

65

14.6/12.5, 15.0/12.9

2-12

1.3m (4'3")

P65-15-XD-N

307

65

17.1/15.0, 17.5/15.4

0-7.5

2.0m (6'6")

5472.00

308

65

17.7/15.6, 18.5/46.4

0-0.5

2.6m (8'6")

5473.00

309

65

16.5/14.4, 17.0/14.9

2.0m (6'6")

5477.00

310

65

17.4/15.3, 18.1/16.0

2.6m (8'6")

5478.00

311

65

17.4/15.2, 18.0/15.8

2.6m (8'6")

5478.06

312

65

14.5/12, 15/12.9

1.3m (4'3")

7476.00

313

65

14.6/12.5, 15.1/13

1.3m (4'3")

7476.02

314

65

14.6/12.5, 15.1/13

1.3m (4'3")

7476.06

315

65

15.6/13.5, 16.2/14.1

2.0m (6'6")

7477.00

316

65

15.6/13.5, 16.2/14.1

2.0m (6'6")

7477.02

317

65

16.9/14.8, 17.3/15.2

2.0m (6'6")

7478.00

318

65

16/13.9, 16.5/14.4

0-7.5

2.0m (6'6")

7472.00

319

65

17.7/15.6, 18.5/46.4

0-0.5

2.0m (6'6")

7472.00A

320

65

16/13.9, 16.5/14.4

2.0m (6'6")

7477.06

321

65

17/14.9, 17.4/15.3

2.6m (8'6")

7478.02

322

65

17/14.9, 17.4/15.3

2.6m (8'6")

7478.06

323

65

17.7/15.6, 18.5/46.4

2.6m (8'6")

7478.00A

324

65

17.2/15.1, 17.5/15.4

0-5.5

2.6m (8'6")

7473.00

325

65

18.5/16.4

0-0.5

2.6m (8'6")

7473.00A

326

90

13.6/11.5, 14/11.9

1.4m (4'7")

7486.06

327

90

14.8/12.7, 15.4/13.3

2.0m (6'6")

7487.00

328

90

14.8/12.7, 15.5/13.4

0-7.5

2.0m (6'6")

7482.00

329

90

15.8/13.7, 16.3/14.2

2.6m (8'6")

7488.00

330

90

15.8/13.7, 16.3/14.2

2.6m (8'6")

7488.02

331

90

16.6/14.5, 17.1/15.0

2.6m (8'6")

7488.00A

332

90

15.9/13.8, 16.3/14.2

0-0.5

2.6m (8'6")

7483.00

333

90

16.6/14.5, 17.0/14.9

0-0.5

2.6m (8'6")

7483.00A

334

305

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 806-960 MHz

Single Broadband Antennas


Cross Polarized
Low Broadband Cross Polarized Antennas, 806-960 MHz

Horizontal Beamwidth Gain dBi dBd

Tilt

Length

Part Number

90

15.9/13.8, 16.4/14.3

2.6m (8'6")

7488.06

335

90

15/12.9, 15.5/13.4

2.0m (6'6")

7487.02

336

90

15/12.9, 15.5/13.4

2.0m (6'6")

7487.06

337

90

16.6/14.5, 17.0/14.9

0-0.5

2.6m (8'6")

5483.00

338

90

16.6/14.5, 17.1/15.0

2.6m (8'6")

5488.00

339

90

13.5/11.4, 14/11.9

2-12

1.3m (4'3")

7481.00

340

90

13.5/11.4, 14/11.9

1.4m (4'7")

7486.00

341

90

13.6/11.5, 14.1/12

1.4m (4'7")

7486.02

342

306

Page

POWERWAVE

P65-15-XD-N

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 790-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.6/12.5, 15.0/12.9
TILT: 2-12
LENGTH: 1.3m (44)

Low Broadband X-Pol 790-960MHz

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

790-960

Frequency band (MHz)

790-896

870-960

Gain (dBi/dBd)

14.6/12.5

15.0/12.9

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.5:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

65

65

15.3

14.2

Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)

>18,17,16@2,7,12

Isolation between inputs (dB)

>19,18,17@2,7,12

30

30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-25

>-25

Vertical beam squint ()

Front to back ratio (dB) 180 30 copolar

>25

>25

Front to back ratio (dB) 180 30 total power

>24

>25

Cross polar discrimination (XPD) 0 (dB)

>15

>15

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1314x280x125 (44x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.5 (31.9)

Weight, without brackets, kg (lbs)

9.0 (19.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367 / 63 / 441

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

18.5 (40.7)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Oct 27 2011 3:54AM

307

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5472.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.1/15.0, 17.5/15.4
TILT: 0-7.5
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

17.1/15.0

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.5:1

Horizontal beam width, -3 dB ()

66

64

Vertical beam width, -3 dB ()

9.6

9.2

Electrical down tilt ()

0 - 7.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,4,7

Isolation between inputs (dB)

>20,17,15@0,4,7

30

30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>11

>11

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2080x280x125 (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20 (44)

Weight, without brackets, kg (lbs)

14.5 (31.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664 / 102 / 798

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

24.5 (54)

RET

8110.10 (AISG1.1), 8110.40 (AISG2.0)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 2:50AM

308

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5473.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 18.5/16.4
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

17.7/15.6

18.5/16.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.5:1

Horizontal beam width, -3 dB ()

67

Vertical beam width, -3 dB ()

7.5

Electrical down tilt ()

64
7
0-5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

>20,17,15@0,2,5

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>11

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

21 (46.3)

Weight, without brackets, kg (lbs)

15.5 (34.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

25 (55.1)

RET

8110.10, 8110.40

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 12:59AM

309

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5477.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.5/14.4, 17.0/14.9
TILT: 0
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

16.5/14.4

17.0/14.9

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

64

Vertical beam width, -3 dB ()

9.8

9.2

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.2

Front to back ratio (dB) 180 30 copolar

>30

>34

Front to back ratio (dB) 180 30 total power

>26

>28

Cross polar discrimination (XPD) 0 (dB)

>20

>18

Cross polar discrimination (XPD) 60 (dB)

>13

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

17.5 (38.5)

Weight, without brackets, kg (lbs)

12.0 (26.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

22 (48.4)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 1 2011 5:33AM

310

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5478.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 18.1/16.0
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17.4/15.3

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

64

Vertical beam width, -3 dB ()

7.3

7.0

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>31

>36

Front to back ratio (dB) 180 30 total power

>29

>29

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 2:13AM

311

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5478.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.2, 18.0/15.8
TILT: 6
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17.4/15.2

18.0/15.8

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

68

64

Vertical beam width, -3 dB ()

7.5

7.0

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

Isolation between inputs (dB)

30

>15
30

Tracking, horizontal plane 60 (dB)

<2.0

<1.0

First null fill (dB)

>-20

>-20

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>28

>27

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

300

Power handling, average total (W)

600

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.7 (41.4)

Weight, without brackets, kg (lbs)

14.5 (30.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

25.5 (53.5)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 2:19AM

312

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7476.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4, 15/12.9
TILT: 0
LENGTH: 1.3m (43)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

14.5/12.4

Polarization

880-960
15/12.9
Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

66

64

15.9

15.3

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>19

Isolation between inputs (dB)

30

30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-25

>-25

Vertical beam squint ()

>19

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>18

>18

Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14 (30.8)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

18 (39.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08163 Rev A Updated: Aug 2 2011 4:36AM

313

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7476.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.6/12.5, 15.1/13
TILT: 2
LENGTH: 1.3m (43)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

14.6/12.5

Polarization

880-960
15.1/13
Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

66

64

14.9

13.8

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>19

Isolation between inputs (dB)

30

30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-25

>-25

Vertical beam squint ()

>19

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14 (30.8)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

18 (39.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08164 Rev A Updated: Jun 6 2011 1:55AM

314

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7476.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.6/12.5, 15.1/13
TILT: 6
LENGTH: 1.3m (43)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

14.6/12.5

Polarization

880-960
15.1/13
Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

66

64

15.3

13.9

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>19

Isolation between inputs (dB)

30

30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-25

>-25

Vertical beam squint ()

>19

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>18

>18

Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14 (30.8)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

18 (39.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08165 Rev A Updated: Aug 2 2011 4:37AM

315

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7477.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.6/13.5, 16.2/14.1
TILT: 0
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.6/13.5

16.2/14.1

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

9.5

Electrical down tilt ()

64
9
0

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>12

>12

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.7)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

23 (50.7)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08166 Rev A Updated: Dec 2 2010 3:06AM

316

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7477.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.8/13.7, 16.3/14.2
TILT: 2
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.8/13.7

16.3/14.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

9.5

Electrical down tilt ()

64
9
2

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>12

>12

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.7)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

23 (50.7)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08167 Rev A Updated: Dec 2 2010 3:07AM

317

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7478.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.9/14.8, 17.3/15.2
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

16.9/14.8

17.3/15.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

7.3

Electrical down tilt ()

64
7
0

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08169 Rev A Updated: Dec 2 2010 3:09AM

318

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7472.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16/13.9, 16.5/14.4
TILT: 0-7.5
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

16/13.9

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

67

Vertical beam width, -3 dB ()

10

Electrical down tilt ()

64
9
0-7.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,4,7

Isolation between inputs (dB)

>20,17,15@0,4,7

30

30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>11

>11

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2080x280x125 (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20 (44)

Weight, without brackets, kg (lbs)

14.5 (31.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

24.5 (54)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08185 Rev A Updated: Dec 2 2010 2:53AM

319

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7472.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.1/15.0, 17.5/15.4
TILT: 0-7.5
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

17.1/15.0

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.5:1

Horizontal beam width, -3 dB ()

66

64

Vertical beam width, -3 dB ()

9.6

9.2

Electrical down tilt ()

0-7.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,4,7

Isolation between inputs (dB)

>20,17,15@0,4,7

30

30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>11

>11

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2080x280x125 (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20(44)

Weight, without brackets, kg (lbs)

14.5(31.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

24.5 (54)

RET

8110.10(AISG1.1),8110.40(AISG2.0)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 30 2010 3:51AM

320

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7477.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16/13.9, 16.5/14.4
TILT: 6
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

16/13.9

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

9.5

Electrical down tilt ()

64
9
6

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

>12

>12

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.7)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

23 (50.7)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08168 Rev A Updated: Jun 6 2011 1:59AM

321

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7478.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9, 17.4/15.3
TILT: 2
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17/14.9

17.4/15.3

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

7.3

Electrical down tilt ()

64
7
2

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08170 Rev A Updated: Dec 2 2010 3:10AM

322

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7478.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9, 17.4/15.3
TILT: 6
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17/14.9

17.4/15.3

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

Vertical beam width, -3 dB ()

7.3

Electrical down tilt ()

64
7
6

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

30

>20
30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08171 Rev A Updated: Dec 2 2010 3:11AM

323

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7478.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 18.1/16.0
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17.4/15.3

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

66

64

Vertical beam width, -3 dB ()

7.3

7.0

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>31

>36

Front to back ratio (dB) 180 30 total power

>29

>29

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>12

>12

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 2:13AM

324

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7473.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.2/15.1, 17.5/15.4
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

67

Vertical beam width, -3 dB ()

7.5

Electrical down tilt ()

64
7
0-5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

Isolation between inputs (dB)

>20,17,15@0,2,5

30

30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>11

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x280x125 (84x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24 (52.9)

Weight, without brackets, kg (lbs)

18.5 (40.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

28 (61.7)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08186 Rev A Updated: Dec 2 2010 2:54AM

325

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7473.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.5/16.4
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

17.7/15.6

18.5/16.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

1.5:1

Horizontal beam width, -3 dB ()

67

Vertical beam width, -3 dB ()

7.5

Electrical down tilt ()

64
7
0-5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

>20,17,15@0,2,5

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>11

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

21(46.3)

Weight, without brackets, kg (lbs)

15.5 (34.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

25 (55.1)

RET

8110.10,8110.40

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 30 2010 3:50AM

326

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7486.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.6/11.5, 14/11.9
TILT: 6
LENGTH: 1.3m (45)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

13.6/11.5

Polarization

880-960
14/11.9
Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

87

85

15.5

13.9

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

Isolation between inputs (dB)

>30

>18
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-25

>-25

Vertical beam squint ()

0.6

0.6

Front to back ratio (dB) 180 30 copolar

>27

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>22

>21

Cross polar discrimination (XPD) 60 (dB)

>10

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

20.5 (45.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08174 Rev A Updated: Jul 15 2011 1:39AM

327

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7487.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.8/12.7, 15.4/13.3
TILT: 0
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

14.8/12.7

15.4/13.3

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

9.7

Electrical down tilt ()

84
9
0

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-20

>-18

Vertical beam squint ()

0.1

0.2

Front to back ratio (dB) 180 30 copolar

>28

>29

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>19

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20.5 (45.1)

Weight, without brackets, kg (lbs)

15 (33)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

25 (55.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08175 Rev A Updated: Dec 2 2010 3:27AM

328

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7482.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.8/12.7, 15.5/13.4
TILT: 0-7.5
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

14.8/12.7

15.5/13.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

88

Vertical beam width, -3 dB ()

9.6

Electrical down tilt ()

86
9
0-7.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,4,7

>20,17,15@0,4,7

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-25

>-20

Vertical beam squint ()

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>19

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

600

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08187 Rev A Updated: Dec 2 2010 3:20AM

329

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7488.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.8/13.7, 16.3/14.2
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.8/13.7

16.3/14.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

7.6

Electrical down tilt ()

84
7
0

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.2

0.1

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24.5 (54)

Weight, without brackets, kg (lbs)

19 (41.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

29.5 (65)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08178 Rev A Updated: Dec 2 2010 3:30AM

330

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7488.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.8/13.7, 16.3/14.2
TILT: 2
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.8/13.7

16.3/14.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

7.6

Electrical down tilt ()

84
7
2

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.3

0.2

Front to back ratio (dB) 180 30 copolar

>26

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24.5 (54)

Weight, without brackets, kg (lbs)

19 (41.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

29.5 (65)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08179 Rev A Updated: Dec 2 2010 3:31AM

331

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7488.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.1/15.0
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

16.6/14.5

17.1/15.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

84

Vertical beam width, -3 dB ()

7.6

7.0

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.2

0.1

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24.5 (54)

Weight, without brackets, kg (lbs)

19 (41.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255(811x12x10)

Shipping weight, kg (lbs)

29.5 (65)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 30 2010 3:50AM

332

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7483.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.9/13.8, 16.3/14.2
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.9/13.8

16.3/14.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

84

Vertical beam width, -3 dB ()

7.5

6.9

Electrical down tilt ()

0-5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

>20,17,15@0,2,5

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-23

>-21

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>27

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

26.5 (58.4)

Weight, without brackets, kg (lbs)

21 (46.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

31.5 (69.4)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08188 Rev A Updated: Dec 2 2010 3:21AM

333

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7483.00A

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.0/14.9
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

16.6/14.5

17.0/14.9

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

90

90

Vertical beam width, -3 dB ()

7.5

6.9

Electrical down tilt ()

0 - 5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

>20,17,15@0,2,5

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-23

>-21

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>27

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>21

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

26.5 (58.4)

Weight, without brackets, kg (lbs)

21 (46.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

31.5 (69.4)

RET

8110.10, 8110.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 2 2010 3:22AM

334

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7488.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15.9/13.8, 16.4/14.3
TILT: 6
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15.9/13.8

16.4/14.3

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

7.6

Electrical down tilt ()

84
7
6

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-20

>-20

Vertical beam squint ()

0.1

0.2

Front to back ratio (dB) 180 30 copolar

>26

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24.5 (54)

Weight, without brackets, kg (lbs)

19 (41.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

29.5 (65)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08180 Rev A Updated: Dec 2 2010 3:32AM

335

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7487.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9, 15.5/13.4
TILT: 2
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15/12.9

15.5/13.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

9.7

Electrical down tilt ()

84
9
2

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-20

>-18

Vertical beam squint ()

0.3

0.2

Front to back ratio (dB) 180 30 copolar

>28

>29

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20.5 (45.1)

Weight, without brackets, kg (lbs)

15 (33)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

25 (55.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08176 Rev A Updated: Dec 2 2010 3:28AM

336

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7487.06

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9, 15.5/13.4
TILT: 6
LENGTH: 2.0m (66)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

880-960

Gain (dBi/dBd)

15/12.9

15.5/13.4

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

9.7

Electrical down tilt ()

84
9
6

Side lobe suppression, vertical 1st upper (dB)

>17

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-20

>-20

Vertical beam squint ()

0.1

0.2

Front to back ratio (dB) 180 30 copolar

>28

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>19

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2020x280x125 (67x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

20.5 (45.1)

Weight, without brackets, kg (lbs)

15 (33)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

664

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225x355x255 (73x12x10)

Shipping weight, kg (lbs)

25 (55.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08177 Rev A Updated: Dec 2 2010 3:29AM

337

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5483.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.0/14.9
TILT: 0-5.5
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

16.6/14.5

17.0/14.9

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

90

90

Vertical beam width, -3 dB ()

7.5

6.9

Electrical down tilt ()

0 - 5.5

Side lobe suppression, vertical 1st upper (dB)

>20,17,15@0,2,5

>20,17,15@0,2,5

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-23

>-21

Vertical beam squint ()

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>27

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>21

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

26.5 (58.4)

Weight, without brackets, kg (lbs)

21 (46.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255 (811x12x10)

Shipping weight, kg (lbs)

31.5 (69.4)

RET

8110.10, 8110.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 3:11AM

338

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

5488.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.6/14.5, 17.1/15.0
TILT: 0
LENGTH: 2.6m (86)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

870-960

Gain (dBi/dBd)

16.6/14.5

17.1/15.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

84

Vertical beam width, -3 dB ()

7.6

7.0

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-18

>-18

Vertical beam squint ()

0.2

0.1

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>20

>20

Cross polar discrimination (XPD) 60 (dB)

>10

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2520x280x125 (83x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

24.5 (54)

Weight, without brackets, kg (lbs)

19 (41.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

835

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725x355x255(811x12x10)

Shipping weight, kg (lbs)

29.5 (65)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 29 2010 3:24AM

339

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7481.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/11.4, 14/11.9
TILT: 2-12
LENGTH: 1.3m (43)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

13.5/11.4

Polarization

870-960
14/11.9
Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

15

Electrical down tilt ()

85
14
2-12

Side lobe suppression, vertical 1st upper (dB)

>19,18,17@2,7,12

>19,18,17@2,7,12

Isolation between inputs (dB)

>30

>30

Tracking, horizontal plane 60 (dB)

<2

<2

>-18

>-18

First null fill (dB)


Vertical beam squint ()

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>23

>23

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)

>9

>9

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.7)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

22.5 (49.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08183 Rev A Updated: Dec 2 2010 3:19AM

340

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7486.00

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/11.4, 14/11.9
TILT: 0
LENGTH: 1.3m (45)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

13.5/11.4

Polarization

880-960
14/11.9
Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

84

15.5

Electrical down tilt ()

14
0

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-21

>-25

Vertical beam squint ()

0.6

0.4

Front to back ratio (dB) 180 30 copolar

>27

>27

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>22

Cross polar discrimination (XPD) 60 (dB)

>10

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

20.5 (45.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08172 Rev A Updated: Jul 15 2011 1:38AM

341

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7486.02

Single Broadband Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 806-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.6/11.5, 14.1/12
TILT: 2
LENGTH: 1.3m (45)

Low Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-960

Frequency band (MHz)

806-896

Gain (dBi/dBd)

13.6/11.5

Polarization

880-960
14.1/12
Dual linear 45

Nominal Impedance ()

50

VSWR

1.4:1

Horizontal beam width, -3 dB ()

87

Vertical beam width, -3 dB ()

84

15.4

Electrical down tilt ()

14
2

Side lobe suppression, vertical 1st upper (dB)

>20

Isolation between inputs (dB)

>30

>20
>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

First null fill (dB)

>-23

>-25

Vertical beam squint ()

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>28

>28

Front to back ratio (dB) 180 30 total power

>22

>22

Cross polar discrimination (XPD) 0 (dB)

>21

>21

Cross polar discrimination (XPD) 60 (dB)

>10

>11

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1270x280x125 (42x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

367

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475x355x255 (410x12x10)

Shipping weight, kg (lbs)

20.5 (45.1)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08173 Rev A Updated: Jul 15 2011 1:39AM

342

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

Low Broadband Cross Polarized Antennas, 698-894 MHz

Single Broadband Antennas


Cross Polarized
Low Broadband Cross Polarized Antennas, 698-894 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

14.5/12.4

1.2m(48)

P65-15-XL-2

344

65

14.5/12.4

1.2m(48)

P65-15-XL-4

345

65

16.0/13.9

1.8m(72)

P65-16-XL-2

346

65

16.0/13.9

1.8m(72)

P65-16-XL-4

347

65

16.0/13.9

1.8m(72)

P65-16-XL-6

348

65

17.5/15.4

2.4m(96)

P65-17-XL-2

349

65

17.5/15.4

2.4m(96)

P65-17-XL-4

350

343

Single Broadband Antennas

POWERWAVE

P65-15-XL-2

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4
TILT: 2
LENGTH: 1.2m (48)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

14.0/11.9

14.5/12.4

Polarization

Dual Linear +/- 45

Nominal Impedance ()

50

VSWR

< 1.33:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

68

65

16.5

15.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

IM3, 2xTx&43dBm (dBc)

> 10
<-153

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

48x12x5 (1219x305x125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

33 (15)

Weight, without brackets, kg (lbs)

22 (10)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

400

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

58 x 16 x 10 (1475 x 400 x 255)

Shipping weight, kg (lbs)

44 (22)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 3 2010 1:08AM

344

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-15-XL-4

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4
TILT: 4
LENGTH: 1.2m (48)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

14.0/11.9

14.5/12.4

Polarization

Dual Linear +/- 45

Nominal Impedance ()

50

VSWR

< 1.33:1

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()

68

65

16.5

15.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

IM3, 2xTx&43dBm (dBc)

> 10
<-153

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

48x12x5 (1219x305x125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

33 (15)

Weight, without brackets, kg (lbs)

22 (10)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

400

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

58 x 16 x 10 (1475 x 400 x 255)

Shipping weight, kg (lbs)

44 (20)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 3 2010 1:09AM

345

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-16-XL-2

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 2
LENGTH: 1.8m (72)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

15.5/13.4

16.0/13.9

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()
Electrical down tilt ()

50

50

< 1.33: 1

< 1.33: 1

68

65

10.5

9.5

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

400

400

Power handling, average total (W)

800

800

IM3, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

72 x 12 x 5 (1829 x 305 x 125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

44 (20)

Weight, without brackets, kg (lbs)

33 (15)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

680

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

82 x 16 x 10 (2082 x 400 x 255)

Shipping weight, kg (lbs)

55 (25)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 3 2010 3:47AM

346

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-16-XL-4

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 4
LENGTH: 72

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

15.5/13.4

16.0/13.9

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()
Electrical down tilt ()

50

50

< 1.33: 1

< 1.33: 1

68

65

10.5

9.5

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

400

400

Power handling, average total (W)

800

800

IM3, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

72 x 12 x 5 (1829 x 305 x 125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

44 (20)

Weight, without brackets, kg (lbs)

33 (15)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1380

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

82 x 16 x 10 (2082 x 400 x 255)

Shipping weight, kg (lbs)

55 (25)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 5 2010 11:34PM

347

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-16-XL-6

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 6
LENGTH: 1.8m (72)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

15.5/13.4

16.0/13.9

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()
Electrical down tilt ()

50

50

< 1.33: 1

< 1.33: 1

68

65

10.5

9.5

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

IM3, 2xTx&43dBm (dBc)

-153

Power handling, average per input (W)

400

Power handling, average total (W)

800

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

72 x 12 x 5 (1829 x 305 x 125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

44 (20)

Weight, without brackets, kg (lbs)

33 (15)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

680

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature
Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

82 x 16 x 10 (2082 x 400 x 255)

Shipping weight, kg (lbs)

55 (25)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 12:23AM

348

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-17-XL-2

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 2
LENGTH: 2.4m (96)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

16.5/14.4

17.5/15.4

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR

50

50

< 1.33:1

< 1.33:1

Horizontal beam width, -3 dB ()

68

65

Vertical beam width, -3 dB ()

8.5

7.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

400

400

Power handling, average total (W)

800

800

IM3, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

96 x 12 x 5 (2438 x 305 x 125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

54 (25)

Weight, without brackets, kg (lbs)

43 (20)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

107 x 16 x 10 (2725 x 400 x 255)

Shipping weight, kg (lbs)

65 (30)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 5 2010 11:29PM

349

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Broadband Antennas

POWERWAVE

P65-17-XL-4

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 4
LENGTH: 2.4m (96)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

16.5/14.4

17.5/15.4

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR

50

50

< 1.33:1

< 1.33:1

Horizontal beam width, -3 dB ()

68

65

Vertical beam width, -3 dB ()

8.5

7.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

> 15

> 15

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 30

> 30

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

400

400

Power handling, average total (W)

800

800

IM3, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

96 x 12 x 5 (2438 x 305 x 125)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

54 (25)

Weight, without brackets, kg (lbs)

43 (20)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

125 (55)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

107 x 16 x 10 (2725 x 400 x 255)

Shipping weight, kg (lbs)

65 (30)

RET

N/A

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 5 2010 11:28PM

350

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Dual Broadband Antennas

POWERWAVE

Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Dual Broadband Antennas


Cross Polarized
Dual High Broadband Cross Polarized Antennas, 2x1710-2170 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

65

17.7/15.6, 17.7/15.6, 17.9/15.8

MET

1.3m (4'3")

7760.02

352

65

17.7/15.6, 17.9/15.8, 18.1/16

MET

1.3m (4'3")

7760.00

353

65

17.7/15.6, 17.9/15.8, 18.1/16

MET

1.3m (4'3")

7760.00A

354

65

18/15.9

MET

1.3m (4'3")

7760.03

355

65

18/15.9

MET

1.3m (4'3")

7760.06

356

65

17.7/15.6, 17.9/15.8, 18.1/16

MET

1.3m (4'3")

7760.40

357

65

19/16.9, 19.2/17.1, 19.4/17.3

MET

2.0m (6'6")

7765.00

358

90

16.1/14, 16.2/14.1, 16.5/14.4

MET

1.3m (4'3")

7762.00

359

90

17.4/15.3, 17.5/15.4, 17.7/15.6

MET

2.0m (6'6")

7766.00

360

351

Page

POWERWAVE

7760.02

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.7/15.6

17.9/15.8

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

63

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>19,19,18,17,16@2,4,6,8,10

>19,19,18,17,16@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

2-10

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>19,19,18,17,16@2,4,6,8,10

>-27,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Oct 28 2011 5:15AM

352

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7760.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-8
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>22,20,18,16,14@0,2,4,6,8

>22,20,18,16,14@0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>22,20,18,16,14@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x430x250 (48x13x9)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 24 2011 2:37AM

353

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7760.00A

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16
TILT: 0-8
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>22,20,18,16,14@0,2,4,6,8

>22,20,18,16,14@0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>22,20,18,16,14@0,2,4,6,8

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x430x250 (48x13x9)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

8110.10, 8110.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 24 2011 2:43AM

354

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7760.03

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 2-10/6-14
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.7/15.6

17.9/15.8

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

63

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>19,19,18,17,16@2,4,6,8,10

>19,19,18,17,16@2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

2 to 10 and 6 to 14

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>19,19,18,17,16@2,4,6,8,10

>-27,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev. A Updated: Dec 2 2010 6:43AM

355

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7760.06

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.7/15.6, 17.9/15.8
TILT: 6-14
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.7/15.6

17.9/15.8

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

63

Vertical beam width, -3 dB ()

7.1

6.8

6.2

>17,16@6,8,10

>17,16@6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

Electrical down tilt ()

6-14

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>17,16@6,8,10

>-27,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev. A Updated: Dec 2 2010 6:42AM

356

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7760.40

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-8
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16.0

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

>22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0
>-24,typical>-18

First null fill (dB)

>-27,typical>-18

>-24,typical>-18

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>16

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Top

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1093

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

8220.10,8220.40,8110.10,8110.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Apr 11 2011 12:38PM

357

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7765.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.0/16.9, 19.2/17.1, 19.4/17.3
TILT: 0-5.5
LENGTH: 2.0m (66)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19.0/16.9

19.2/17.1

19.4/17.3

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

63

Vertical beam width, -3 dB ()

4.7

4.4

4.2

>22,20,18,16,15,13@0,1,2,3,4,5

>22,20,18,16,15,14@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

Electrical down tilt ()

0-5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>22,20,18,16,15,14@0,1,2,3,4,5

>-22,typical>-18

>-22,typical>-18

>-22,typical>-18

Vertical beam squint ()

<0.5

<0.5

<0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>18

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x343x100 (64x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.5 (49.6)

Weight, without brackets, kg (lbs)

17 (37.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

819

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2085x430x250 (610x13x9)

Shipping weight, kg (lbs)

27 (59.5)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08206 Rev A Updated: Dec 2 2010 6:47AM

358

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7762.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1/14.0, 16.2/14.1, 16.5/14.4
TILT: 0-8
LENGTH: 1.3m (43)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

16.1/14.0

16.2/14.1

16.5/14.4

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

89

93

90

Vertical beam width, -3 dB ()

7.0

6.7

6.3

>17,17,16,15,14@0,2,4,6,8

>17,17,16,15,14@0,2,4,6,8

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

Electrical down tilt ()

0-8

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>20,18,17,16,15@0,2,4,6,8

>-25,typical>-18

>-25,typical>-18

>-25,typical>-18

Vertical beam squint ()

<0.5

<0.5

<0.5

Front to back ratio (dB) 180 30 copolar

>24

>25

>26

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>12

>7

>7

>7

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Cross polar discrimination (XPD) 60 (dB)


Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

23.5 (51.8)

Weight, without brackets, kg (lbs)

18 (39.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08204 Rev A Updated: Dec 2 2010 6:49AM

359

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7766.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 17.4/15.3, 17.5/15.4, 17.7/15.6
TILT: 0-5.5
LENGTH: 2.0m (66)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

17.4/15.3

17.5/15.4

17.7/15.6

Gain (dBi/dBd)
Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

89

93

90

Vertical beam width, -3 dB ()

4.7

4.4

4.2

>18,18,15,14,13,11@0,1,2,3,4,5

>20,20,17,16,14,14@0,1,2,3,4,5

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

Electrical down tilt ()

0-5.5

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>22,20,18,16,15,14@0,1,2,3,4,5

>-25,typical>-18

>-25,typical>-18

>-25,typical>-18

Vertical beam squint ()

<0.5

<0.5

<0.5

Front to back ratio (dB) 180 30 copolar

>25

>25

>25

Front to back ratio (dB) 180 30 total power

>23

>23

>23

Cross polar discrimination (XPD) 0 (dB)

>16

>16

>12

>8

>8

>8

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Cross polar discrimination (XPD) 60 (dB)


Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934x343x100 (64x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.5 (60.6)

Weight, without brackets, kg (lbs)

22 (48.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

819

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2085x430x250 (610x13x9)

Shipping weight, kg (lbs)

32 (70.5)

RET

8110.40. 8110.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08207 Rev. A Updated: Sep 16 2011 6:06AM

360

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Dual Broadband Antennas

POWERWAVE

Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Dual Broadband Antennas


Cross Polarized
Dual High Broadband Cross Polarized Antennas, 824-960/1710-2170 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

65

15.2/13.1, 18/15.9

MET

1.4m (47)

7750.00

362

65

15.2/13.1, 18/15.9

MET

1.4m (47)

7750.00A

363

65

16.7/14.6, 17.6/15.5

MET

2.0m (6'6")

7752.00

364

65

16.7/14.6, 17.6/15.5

MET

2.0m (6'6")

7752.00A

365

65

17.3/15.2, 17.8/15.7

MET

2.6m (8'6")

7755.00

366

65

17.3/15.2, 17.8/15.7

MET

2.6m (86)

7755.00A

367

361

Page

POWERWAVE

7750.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.2/13.1, 18/15.9
TILT: 2-12/0-8
LENGTH: 1.4m (47)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14.6/12.5

15.2/13.1

17.5/15.4

17.7/15.6

18.0/15.9

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

1.5:1

1.5:1

69

67

65

65

62

14.9

13.7

6.9

6.6

6.2

Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)

0-8

>18,17,16,16,15,15@

>18,17,16,16,15,15@

2,4,6,8,10,12

2,4,6,8,10,12

2,4,6,8

2,4,6,8

2,4,6,8

30

30

30

30

30

Isolation between inputs (dB)


Inter band Isolation (dB)

>18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

40

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<2.0

<2.0

<2.0

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.3

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>27

>27

>27

>27

>27

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

Cross polar discrimination (XPD) 0 (dB)

15

15

20

20

20

Cross polar discrimination (XPD) 60 (dB)

10

>7

>7

<0.48

<0.62

<0.62

<0.62

Far field coupling

<0.33

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-153

<-153

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x125mm (47x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

17.6 (39)

Weight, without brackets, kg (lbs)

12.1 (27)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x255 (51x12x10)

Shipping weight, kg (lbs)

21.5 (47.3)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Dec 2 2010 5:47AM

362

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7750.00A

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.2/13.1, 18.0/15.9
TILT: 2-12/0-8
LENGTH: 1.4m (47)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14.6/12.5

15.2/13.1

17.5/15.4

17.7/15.6

18.0/15.9

Polarization

Dual Linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual Linear 45

50

50

1.5:1

1.5:1

69

67

65

65

62

14.9

13.7

6.9

6.6

6.2

Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)

0-8

>18,17,16,16,15,15@

>18,17,16,16,15,15@

2,4,6,8,10,12

2,4,6,8,10,12

0,2,4,6,8

0,2,4,6,8

0,2,4,6,8

30

30

30

30

30

Isolation between inputs (dB)


Inter band Isolation (dB)

>18,18,16,15,14@ >18,18,16,15,14@ >18,18,16,15,14@

40

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<2.0

<2.0

<2.0

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.3

0.3

0.3

Front to back ratio (dB) 180 30 copolar

>27

>27

>27

>27

>27

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

Cross polar discrimination (XPD) 0 (dB)

15

15

20

20

20

Cross polar discrimination (XPD) 60 (dB)

10

<0.33

<0.48

<0.62

<0.62

<0.62

Far field coupling


IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408X280X125mm (47X11X4)

Mounting

Pre Mounted Heavy Duty Brackets

Weight, with brackets, kg (lbs)

17.6 (39)

Weight, without brackets, kg (lbs)

12.1 (27)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550X355X25mm (51X12X10)

Shipping weight, kg (lbs)

21.5 (47.3)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 12:47AM

363

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7752.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 17.6/15.5
TILT: 2-9/0-8
LENGTH: 2.0m (66)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

15.8/13.7

16.7/14.6

17.1/15

17.3/15.2

17.6/15.5

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

63

63

61

Vertical beam width, -3 dB ()

9.6

8.9

7.1

6.6

6.3

>17,16,15,14@

>17,16,15,14@

>17,16,15,14,13@

>18,18,17,16,16@

>20,19,19,18,17@

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

30

30

30

30

30

Electrical down tilt ()

2-9

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

40

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<2.0

<2.0

<3

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.4

Front to back ratio (dB) 180 30 copolar

>27

>27

>27

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

>25

>25

16

15

16

16

16

> 12

> 9.5

> 6.2

> 6.5

> 7.5

<0.39

<0.5

<0.59

<0.59

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.26

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-153

<-153

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x125mm (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.8 (44)

Weight, without brackets, kg (lbs)

16.0 (35)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 7:01AM

364

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7752.00A

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 18.1/16.0
TILT: 2-9/0-8
LENGTH: 2.0m (66)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

15.8/13.7

16.7/14.6

17.6/15.5

17.8/15.7

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

63

63

61

Vertical beam width, -3 dB ()

9.6

8.9

7.0

6.6

6.3

>17,16,15,14@

>17,16,15,14@

>17,16,15,14,13@

>18,18,17,16,16@

>20,19,19,18,17@

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

30

30

30

30

30

Electrical down tilt ()

2-9

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

40

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<2.0

<2.0

<3

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.4

Front to back ratio (dB) 180 30 copolar

>28

>31

>28

>31

>32

Front to back ratio (dB) 180 30 total power

>26

>27

>27

>28

>29

Cross polar discrimination (XPD) 0 (dB)

>12

>9.5

>7.5

>6.9

>7.5

> 12

> 9.5

> 6.2

> 6.5

> 7.5

<0.26

<0.39

<0.5

<0.59

<0.59

Cross polar discrimination (XPD) 60 (dB)


Far field coupling
IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x125mm (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.8 (44)

Weight, without brackets, kg (lbs)

16.0 (35)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 3 2011 12:51AM

365

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7755.00

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: 2-8/0-8
LENGTH: 2.6m (86)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.6/14.5

17.3/15.2

17.3/15.2

17.6/15.5

17.8/15.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

62

Vertical beam width, -3 dB ()

7.4

6.9

6.4

6.1

>18,18,17,16,16@

>18,18,17,16,16@

>17,16,15,14,13@

>17,17,16,15,14@

>17,17,16,15,14@

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

30

30

30

30

30

Electrical down tilt ()

2-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

38

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.5

<1

<3.5

First null fill (dB)

>-25

>-25

>-25

>-25

<-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

>25

>25

16

14

16

16

16

Cross polar discrimination (XPD) 60 (dB)

>11

> 9.5

> 6.3

>7.2

>7.5

Far field coupling

<0.3

<0.41

<0.53

<0.58

<0.58

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-150

<-150

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x125mm (88x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

25.1 (55)

Weight, without brackets, kg (lbs)

19.6 (43)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2800x355x255 (92x12x10)

Shipping weight, kg (lbs)

32.5 (71.6)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Dec 2 2010 6:02AM

366

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7755.00A

Dual Broadband Antennas


POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: 2-8/0-8
LENGTH: 2.6m (86)

Dual Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.6/14.5

17.3/15.2

17.3/15.2

17.6/15.5

17.8/15.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

62

Vertical beam width, -3 dB ()

7.4

6.9

6.4

6.1

>18,18,17,16,16@

>18,18,17,16,16@

>17,16,15,14,13@

>17,17,16,15,14@

>17,17,16,15,14@

2,4,6,8

2,4,6,8

0,2,4,6,8

0,2,4,6,8

0,2,4,6,8

30

30

30

30

30

Electrical down tilt ()

2-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

38

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.5

<1

<3.5

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>16

>14

>16

>16

>16

Cross polar discrimination (XPD) 60 (dB)

>11

> 9.5

> 6.3

>7.2

>7.5

Far field coupling

<0.3

<0.41

<0.53

<0.58

<0.58

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-150

<-150

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x125mm (88x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

25.1 (55)

Weight, without brackets, kg (lbs)

19.6 (43)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light grey

Packing size, HxWxD, mm (ft)

2800x355x255 (92x12x10)

Shipping weight, kg (lbs)

32.5 (71.6)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Nov 29 2010 7:36AM

367

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Triple Broadband Antennas

POWERWAVE

Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Triple Broadband Antennas


Cross Polarized
Triple Broadband Cross Polarized Antennas, 824-960/2x1710-2170 MHz

Horizontal
Beamwidth
65
65
65
65
65
65

Gain dBi dBd


14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
17.3/15.2, 17.9/15.8,
17.9/15.8
17.3/15.2, 17.9/15.8,
17.9/15.8

Tilt

Length

Part Number

MET

1.4m (47)

7780.00

369

MET

1.4m (47)

7780.00A

370

MET

2.0m (66)

7782.00

371

MET

2.0m (66)

7782.00A

372

MET

2.6m (86)

7785.00

373

MET

2.6m (86)

7785.00A

374

368

Page

POWERWAVE

7780.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.8/12.7, 14.8/12.7
TILT: 2-12/0-12/0-12
LENGTH: 1.4m (47)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

Dual linear 45

50

50

1.5:1

1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12.0

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

30

30

30

30

>30

Vertical beam width, -3 dB ()


Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<1

<2

<1.5

<1.2

<4

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x125mm (47x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19 (42)

Weight, without brackets, kg (lbs)

13.5 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

23 (50.7)

RET

8210.40, 8210.10, 8230.40, 8230.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Nov 30 2010 3:39AM

369

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7780.00A

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 2-12/0-12/0-12
LENGTH: 1.4m (47)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

1.5:1

1.5:1

71

67

65

64

62

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

30

30

30

30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<1

<2

<1.5

<1.2

<4

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x125mm (47x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19 (42)

Weight, without brackets, kg (lbs)

13.5 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

23 (50.7)

RET

8230.10,8230.40, 8210.10,8210.40

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 12:58AM

370

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7782.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9/0-10/0-10
LENGTH: 2.0m (66)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,9

2,5,7,9

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

2-9

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 10

>34

>34

Tracking, horizontal plane 60 (dB)

<1.0

<1

<1.5

<2

<4

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x125mm (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

23.4 (48)

Weight, without brackets, kg (lbs)

17.9 (39)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

28 (61.7)

RET

8210.40, 8210.10, 8230.40, 8230.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 23 2011 10:35AM

371

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7782.00A

Triple Broadband Antennas


POLARIZATION: XXX-pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 2-9/0-10/0-10
LENGTH: 2.0m (66)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14.0

16.5/14.4

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

> 18, 17, 16, 16@

> 17, 15, 13@

> 17, 15, 14@

> 17, 16, 15@

2,5,7,9 degree

2,5,7,9 degree

0, 6, 10 degree

0, 6, 10 degree

0, 6, 10 degree

> 30

> 30

> 30

> 30

Electrical down tilt ()

2-9

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0 - 10

> 30

Inter band Isolation (dB)

> 34

> 34

Tracking, horizontal plane 60 (dB)

<1

<1

< 1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

> 28

> 30

> 27

> 28

> 30

Front to back ratio (dB) 180 30 total power

> 26

> 26

> 25

> 27

> 27

16

15

16

16

15

> 11

>9

>7

>6

>6

< 0.47

< 0.52

< 0.66

< 0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

< 0.27

IM3, 2xTx&43dBm (dBc)

< -150

< -150

IM7, 2xTx&43dBm (dBc)

< -160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

<4

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x125 (68x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

23.4 (48)

Weight, without brackets, kg (lbs)

17.9 (39)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

28 (61.7)

RET

8210.40, 8210.10, 8230.40, 8230.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:35AM

372

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7785.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8
TILT: 2-8/0-8/0-8
LENGTH: 2.6m (86)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.7/14.6

17.3/15.2

17.3/15.2

17.5/15.4

17.9/15.8

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

66

65

62

Vertical beam width, -3 dB ()

7.4

6.9

6.7

6.4

6.2

>17,16,15,14@

>17,16,15,14@

>17,16,15,14,13@

>17,16,15,14,13@

>17,16,16,15,15@

2,4,6,8

2,4,6,8

0,2,4,6,8

0,2,4,6,8

0,2,4,6,8

>30

>30

>30

>30

>30

Electrical down tilt ()

2-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

38

38

Tracking, horizontal plane 60 (dB)

<1

<1

<1.1

<1.0

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

<2.9

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x125mm (88x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.7 (61)

Weight, without brackets, kg (lbs)

22.2 (49)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2800x355x255 (92x12x10)

Shipping weight, kg (lbs)

33 (72.7)

RET

8210.40, 8210.10, 8230.40, 8230.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Nov 30 2010 4:04AM

373

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7785.00A

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.9/15.8, 17.9/15.8
TILT: 2-8/0-8/0-8
LENGTH: 2.6m (86)

Triple Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-896

870-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.7/14.6

17.3/15.2

17.3/15.2

17.5/15.4

17.9/15.8

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

66

65

62

Vertical beam width, -3 dB ()

7.4

6.9

6.7

6.4

6.2

>17,16,15,14@

>17,16,15,14@

>17,16,15,14,13@

>17,16,15,14,13@

>17,16,16,15,15@

2,4,6,8

2,4,6,8

0,2,4,6,8

0,2,4,6,8

0,2,4,6,8

>30

>30

>30

>30

>30

Electrical down tilt ()

2-8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<1

<1

<1.1

<1.0

<2.9

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

> 12

>9.5

>7.0

> 7.5

> 7.7

<0.44

< 0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-150

<-150

IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x125mm (88x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.7 (61)

Weight, without brackets, kg (lbs)

22.2 (49)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2800x355x255 (92x12x10)

Shipping weight, kg (lbs)

33 (72.7)

RET

8210.40, 8210.10, 8230.40, 8230.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Mar 19 2010 Updated: Mar 3 2011 1:02AM

374

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Triple Broadband Antennas

POWERWAVE

Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz

Triple Broadband Antennas


Cross Polarized
Triple Broadband Cross Polarized Antennas, 790-960/1710-2170/2500-2690 MHz

Horizontal
Beamwidth
65
65
65

Gain dBi dBd


17.4/15.3, 17.6/15.5,
17.4/15.3
16.0/13.9, 15.9/13.8,
15.8/13.7
14.5/12.4, 14.6/12.5,
14.4/12.3

Tilt

Length

Part Number

2-8/2-10/2-10

2.6m (86)

P65-18-XDHW2-N

376

2-10/2-12/2-12

2.0m (66)

P65-17-XDHW2-N

378

2-12/2-14/2-14

1.4m (47)

P65-15-XDHW2-N

380

375

Page

Triple Broadband Antennas

P65-18-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz

Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.

Features:

Three independent arrays under one radome

Aperture Coupled Patch technology for best in class performance

Compatible with Powerwave RET modules

ELECTRICAL SPECIFICATIONS
Frequency range (MHz)

790-960

1710-2170

2500-2690

Frequency band (MHz)

790-894

870-960

1710-1880

1900-2170

2500-2690

2500-2690

Gain (dBi/dBd)

16.4/14.3

17.6/15.5

17.4/15.3

17.8/15.7

17.4/15.3

17.4/15.3

Polarization

Dual linear 45

Dual linear 45

Dual linear 45

50

50

50

Nominal Impedance ()
VSWR

<1.5:1

Horizontal beam width, -3 dB ()

<1.5:1

<1.5:1

72

67

63

60

62

62

Front to back ratio (dB)

copolar 180 30

>23

>27

>27

>27

>27

28

total power 180 30

>21

>24

>25

>25

>25

27

Cross polar discrimination (XPD)

Boresight 0 (dB)

>13

>13

>13

>13

>13

13

Sector 60 (dB)

7.5

6.9

6.9

6.2

5.0

5.0

Vertical beam width, -3 dB ()


Electrical down tilt ()

2-8

2 - 10

2 - 10

1st Upper Side Lobe suppression,


typical (dB)

>15

>15

>15

>15

>15

>15

Isolation, Intersystem, (dB)

>30

>30

>30

>30

>30

>30

Isolation, Interband, typical, (dB)

>30

Intermodulation Products 3rd Order,


2 x 43dBm,(dBc)

<-150

<-150

<-153

Intermodulation Products 5th Order,


2 x 43dBm,(dBc)

<-160

<-160

Power handling, average per input (W)

200

200

200

Power handling, average total (W)

400

400

400

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Oct 30 2011 2:07PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

376

Triple Broadband Antennas

P65-18-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2705x282x155mm(106x11x6)

Weight, with brackets, kg (lbs)

28.0(61.6)

Weight, without brackets, kg (lbs)

22.5(49.5)

Packing size, HxWxD, mm (ft)

2845x486x290(112x19x11)

Packing weight, kg (lbs)

34.4(75.7)

INTERFACE VIEW

frontal: 883
Wind load at 150kmh, (N)

NOTES

lateral: 188
rear side: 1062

Antenna installations must be grounded according to local and


national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.

Maximum wind speed, kmh (mph)

42(93)

Survival wind speed, kmh (mph)

55(123)

Radome Material

ASA

Radome colour

Light Gray

Operating Temperature, C

-40C to +60C

Environmental conditions

ETS 300 019-1-4 class 4.1E

Lightning protection

DC Grounded

Mounting

Pre-mounted heavy duty brackets

Every electrical and telephone wire is potential


dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.

REMOTE ELECTRICAL TILT

ANTENNA MOUNTS

RET module
AISG2.0(AISG1.1/Ericsson)

8210.40, 8211.40, 8212.40, 8230.40

RET module
AISG1.1(AISG2.0/Ericsson)

8210.10, 8211.10, 8212.10, 8230.10

1880MHz 2dt

880MHz 2dt

7454.00A

Triple Mount Bracket

7256.00

Heavy Duty Tilt Bracket 1-4.5

2650MHz 2dt

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Oct 30 2011 2:07PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

377

Triple Broadband Antennas

P65-17-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz

Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.

Features:

Three independent arrays under one radome

Aperture Coupled Patch technology for best in class performance

Compatible with Powerwave RET modules

ELECTRICAL SPECIFICATIONS
Frequency range (MHz)

790-960

1710-2170

2500-2690

Frequency band (MHz)

790-894

870-960

1710-1880

1900-2170

2500-2690

2500-2690

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.0/13.9

15.8/13.7

15.8/13.7

Polarization

Dual linear 45

Dual linear 45

Dual linear 45

50

50

50

Nominal Impedance ()
VSWR

<1.5:1

Horizontal beam width, -3 dB ()

<1.5:1

<1.5:1

72

67

66

63

66

66

Front to back ratio (dB)

copolar 180 30

>23

>27

>27

>27

>27

27

total power 180 30

>21

>24

>25

>25

>25

25

Cross polar discrimination (XPD)

Boresight 0 (dB)

>13

>13

>13

>13

>13

13

Sector 60 (dB)

9.9

9.0

8.9

8.3

7.6

7.6

Vertical beam width, -3 dB ()


Electrical down tilt ()

2-9

2 - 12

2 - 12

1st Upper Side Lobe suppression,


typical (dB)

>15

>15

>15

>15

>15

>15

Isolation, Intersystem, (dB)

>30

>30

>30 typ.

>30 typ.

>30 typ.

>30

Isolation, Interband, typical, (dB)

>30

Intermodulation Products 3rd Order,


2 x 43dBm,(dBc)

<-150

<-150

<-153

Intermodulation Products 5th Order,


2 x 43dBm,(dBc)

<-160

<-160

Power handling, average per input (W)

200

200

200

Power handling, average total (W)

400

400

400

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Oct 30 2011 2:05PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

378

Triple Broadband Antennas

P65-17-XDHW2-N
MECHANICAL SPECIFICATIONS
Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2053x282x155mm (81x11x6)

Weight, with brackets, kg (lbs)

23.9 (52.4)

Weight, without brackets, kg (lbs)

18.4 (40.5)

Packing size, HxWxD, mm (ft)

2140x486x290 (84x19x11)

Packing weight, kg (lbs)

28.6 (63.0)

INTERFACE VIEW

frontal: 675
Wind load at 150kmh, (N)

NOTES

lateral: 143
rear side: 811

Maximum wind speed, kmh (mph)

42 (93)

Survival wind speed, kmh (mph)

55 (123)

Radome Material

ASA

Radome colour

Light Grey

Operating Temperature, C

-40C to +60C

Environmental conditions

ETS 300 019-1-4 class 4.1E

Lightning protection

DC grounded

Mounting

Pre-mounted standard brackets

Antenna installations must be grounded according to local and


national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.
Every electrical and telephone wire is potential
dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.

REMOTE ELECTRICAL TILT

ANTENNA MOUNTS

RET module
AISG2.0(AISG1.1/Ericsson)

8210.40, 8211.40, 8212.40, 8230.40

RET module
AISG1.1(AISG2.0/Ericsson)

8210.10, 8211.10, 8212.10, 8230.10

1880MHz 2dt

880MHz 2dt

7454.00A

Triple Mount Bracket

7256.00

Heavy Duty Tilt Bracket 1-4.5

2650MHz 2dt

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Oct 30 2011 2:05PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

379

Triple Broadband Antennas

P65-15-XDHW2-N
Triple Broadband 790-960/1710-2170/2500-2690MHz

Introduction:
This Triple Broadband antenna supports 790-960MHz, 1710-2170MHz and 2500-2690MHz
under one radome and keeps independent variable down tilt capability for all three arrays.
The 2.6GHz array supports both WiMAX and LTE2.6 applications.

Features:

Three independent arrays under one radome

Aperture Coupled Patch technology for best in class performance

Compatible with Powerwave RET modules

ELECTRICAL SPECIFICATIONS
Frequency range (MHz)

790-960

1710-2170

2500-2690

Frequency band (MHz)

790-894

870-960

1710-1880

1900-2170

2500-2690

2500-2690

Gain (dBi/dBd)

14.2/12.1

14.7/12.6

14.4/12.3

14.5/12.4

14.4/12.3

14.4/12.3

Polarization

Dual linear 45

Dual linear 45

Dual linear 45

50

50

50

Nominal Impedance ()
VSWR

<1.5:1

Horizontal beam width, -3 dB ()

<1.5:1

<1.5:1

73

67

63

60

65

65

Front to back ratio (dB)

copolar 180 30

>23

>27

>27

>27

>27

27

total power 180 30

>21

>24

>24

>24

>24

24

Cross polar discrimination (XPD)

Boresight 0 (dB)

>13

>13

>13

>13

>13

13

Sector 60 (dB)

15.5

13.8

14.4

12.4

13.6

13.6

Vertical beam width, -3 dB ()


Electrical down tilt ()

2 - 12

1st Upper Side Lobe suppression,


typical (dB)
Isolation, Intersystem, (dB)

2 - 14

2 14

>15

>15

>15

>15

>15

>15

>30 typ.

>30 typ.

>30

>30

>30

>30

Isolation, Interband, typical, (dB)

>30

Intermodulation Products 3rd Order,


2 x 43dBm,(dBc)

<-150

<-150

<-153

Intermodulation Products 5th Order,


2 x 43dBm,(dBc)

<-160

<-160

Power handling, average per input (W)

200

200

200

Power handling, average total (W)

400

400

400

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 1 of 2
Updated: Oct 30 2011 2:04PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

380

Triple Broadband Antennas

P65-15-XDHW2-N
MECHANICAL SPECIFICATIONS

INTERFACE VIEW

Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1432x282x155mm (56.4x11x6)

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14.2 (31.2)

Packing size, HxWxD, mm (ft)

1565x486x290 (61.6x19x11)

Packing weight, kg (lbs)

23.9 (52.6)
frontal: 431

Wind load at 150kmh, (N)

NOTES

lateral: 97
rear side: 517

Antenna installations must be grounded according to local and


national codes. Do not install or work on antennas near power
lines. Install or work on antennas or similar structures out of falling
distance of all such lines.

Maximum wind speed, kmh (mph)

42 (93)

Survival wind speed, kmh (mph)

55 (123)

Radome Material

ASA

Radome colour

Light Grey

Operating Temperature, C

-40C to +60C

Environmental conditions

ETS 300 019-1-4 class 4.1E

Lightning protection

DC grounded

Mounting

Pre-mounted heavy duty brackets

Every electrical and telephone wire is potential


dangerous.
RF-connectors torque recommendations must be followed. AISG
connectors must be hand tightened.Do not use tools for AISG
connectors tightening.

REMOTE ELECTRICAL TILT

ANTENNA MOUNTS

RET module
AISG2.0(AISG1.1/Ericsson)

8210.40, 8211.40,8212.40, 8230.40

RET module
AISG1.1(AISG2.0/Ericsson)

8210.10, 8211.10,8212.10, 8230.10

1880MHz 2dt

880MHz 2dt

7454.00A

Triple Mount Bracket

7256.00

Heavy Duty Tilt Bracket 1-4.5

2650MHz 2dt

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact
your Powerwave representative for complete performance data.

Page 2 of 2
Updated: Oct 30 2011 2:04PM

Powerwave Technologies 1801 East St. Andrew Place, Santa Ana, CA 92705 USA Tel: 714-466-1000 Fax: 714-466-5800 www.powerwave.com ussales@pwav.com

381

Power wave

Single and Dual Band Antennas

The Powerwave single band antennas outstanding


performance in the field derives from excellent voltage
standing wave ratio (VSWR), isolation beam squint and
tracking. This design ensures minimized intermodulation
products, thus substantially enhancing system benefits.
The Powerwave polarization diversity systems use one
antenna with two orthogonal polarizations slanted at 45
to provide the independently fading signals needed for
achieving top- quality coverage. As a result of thorough,
in-depth research and testing, Powerwave has produced
a variety of designs that ensure the isolation, cross
polarization discrimination and orthogonality between inputs
needed to achieve the highest possible diversity gain,
hence the most efficient system performance.

382

Single and Dual Band Antennas

POWERWAVE

Single and Dual Band Antennas

Single Band Antennas


Cross Polarized

Page

ALX Cross Polarized Antennas, 806-896 MHz

384

X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

386

Vertical Polarized

Page

Omni Vertical Cross Polarized Antennas, 806-896 MHz

406

Urban Vertical Polarized Antennas, 824-896/870-960 MHz

414

Vertical Polarized

Page

ALVC Vertical Polarized Antennas, , 806-896/1850-1990 MHz

383

438

Single Band Antennas

POWERWAVE

ALX Cross Polarized Antennas, 806-896 MHz

Single Band Antennas


Cross Polarized
ALX Cross Polarized Antennas, 806-896 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

90

10.5/8.4

FET

0.7m (2'3")

7390.00B

385

384

POWERWAVE

Single Band Antennas

7390.00B

POLARIZATION: X-Pol
FREQUENCY (MHz): 806-896
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 10.5/8.4
TILT: FET
LENGTH: 0.7m (23)

ALX Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

Frequency band (MHz)

806-896

Gain (dBi/dBd)

10.5/8.4

Polarization

Linear slanted

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

29

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>13

First null fill (dB)

Vertical beam squint ()

<2

Front to back ratio (dB) 180 30 coplanar

>19

Front to back ratio (dB) 180 30 total power

>17

Cross polar discrimination (XPD) 0 (dB)

>13

Cross polar discrimination (XPD)60 (dB)


Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

710x280x125 (24x11x5)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.7 (17)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

189

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

850x355x200 (29x12x10)

Shipping weight, kg (lbs)

9.5 (20.9)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08018 Rev A Updated: Jul 15 2011 1:36AM

385

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Band Antennas

POWERWAVE

X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas


Cross Polarized
X-Urban Cross Polarized Antennas, 824-896/870-960 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

12.5/10.4

FET

0.7m (2'3")

7216.03

387

65

12.5/10.4

FET

0.7m (2'3")

7282.03

388

65

14.5/12.4

FET

1.3m (4'3")

7217.11

389

65

15.5/13.4

FET

1.3m (4'3")

7217.04

390

65

15/12.9

FET

1.3m (4'3")

7217.03

391

65

15/12.9

FET

1.3m (4'3")

7263.01

392

65

15/12.9

FET

1.3m (4'3")

7263.04

393

65

16.5/14.4

FET

1.9m (6'2")

7255.03

394

65

16.5/14.4

FET

1.9m (6'2")

7281.02

395

65

16.5/14.4

FET

1.9m (6'2")

7281.04

396

65

17.5/15.4

FET

2.6m (8'6")

7218.03

397

65

17.5/15.4

FET

2.6m (8'6")

7218.04

398

65

17.5/15.4

FET

2.6m (8'6")

7218.13

399

65

17.5/15.4

FET

2.6m (8'6")

7218.14

400

65

17/14.9

FET

1.9m (6'2")

7255.04

401

65

18/15.9

FET

2.6m (8'6")

7218.05

402

65

18/15.9

FET

2.6m (8'6")

7218.09

403

65

18/15.9

FET

2.6m (8'6")

7218.15

404

65

18/15.9

FET

2.6m (8'6")

7218.19

405

386

POWERWAVE

7216.03

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (23)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

12.5/10.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

26

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>10

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)


Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

660x256x50 (22x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.3 (16)

Weight, without brackets, kg (lbs)

3.6 (7.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

222

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour
Packing size, HxWxD, mm (ft)

770x308x121 (26x1x5)

Shipping weight, kg (lbs)

7.5 (16.5)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08069 Rev A Updated: May 12 2011 3:27AM

387

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7282.03

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (23)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

12.5/10.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

25

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>9

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>22

Front to back ratio (dB) 180 30 total power

>18

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

660x256x50 (22x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

222

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

750x308x121 (26x1x5)

Shipping weight, kg (lbs)

5 (11)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08142 Rev A Updated: May 25 2011 12:46AM

388

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7217.11

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4
TILT: FET
LENGTH: 1.3m (43)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

14.5/12.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

13

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>23

Front to back ratio (dB) 180 30 total power

>19

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

8.5 (18.7)

Weight, without brackets, kg (lbs)

4.8 (10.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

10 (22)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08072 Rev A Updated: May 25 2011 12:33AM

389

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7217.04

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (43)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

15.5/13.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

13

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

8.5 (18.7)

Weight, without brackets, kg (lbs)

4.8 (10.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

10 (22)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08071 Rev A Updated: May 25 2011 12:32AM

390

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7217.03

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (43)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

15/12.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

13

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

8.5 (18.7)

Weight, without brackets, kg (lbs)

4.8 (10.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

10 (22)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08070 Rev A Updated: May 25 2011 12:32AM

391

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7263.01

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (43)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

15/12.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

13

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>22

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (52x10.4x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.5 (16.5)

Weight, without brackets, kg (lbs)

7.5 (16.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (56x12x5)

Shipping weight, kg (lbs)

8.5 (19)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08126 Rev A Updated: May 25 2011 12:43AM

392

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7263.04

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (43)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

15/12.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

13

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>22

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (52x10.4x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.5 (16.5)

Weight, without brackets, kg (lbs)

7.5 (16.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (56x12x5)

Shipping weight, kg (lbs)

8.5 (19)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08127 Rev A Updated: May 25 2011 12:44AM

393

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7255.03

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (62)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

14.2 (31.3)

Weight, without brackets, kg (lbs)

10.5 (23.1)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

12 (26.5)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08081 Rev A Updated: May 25 2011 12:41AM

394

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7281.02

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (62)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

14.5 (31.9)

Weight, without brackets, kg (lbs)

9 (19.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

10 (22)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08132 Rev A Updated: May 25 2011 12:45AM

395

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7281.04

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 1.9m (62)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>14

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

14.5 (31.9)

Weight, without brackets, kg (lbs)

9 (19.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

10 (22)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08223Rev A Updated: May 25 2011 12:46AM

396

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.03

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17.5/15.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

Vertical beam squint ()

<0.5

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

20.2 (44.5)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08073 Rev A Updated: May 25 2011 12:34AM

397

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.04

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17.5/15.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

Vertical beam squint ()

<0.5

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

20.2 (44.5)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08074 Rev A Updated: May 25 2011 12:36AM

398

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.13

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17.5/15.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.5

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

22.3 (49.1)

Weight, without brackets, kg (lbs)

16.8 (37)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08077 Rev A Updated: May 25 2011 12:38AM

399

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.14

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17.5/15.4

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.5

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

22.3 (49.1)

Weight, without brackets, kg (lbs)

16.8 (37)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7256.00, 7454.00,

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08078 Rev A Updated: May 25 2011 12:39AM

400

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7255.04

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 880-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (62)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

880-960

Frequency band (MHz)

880-960

Gain (dBi/dBd)

17/14.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

14.2 (31.3)

Weight, without brackets, kg (lbs)

10.5 (23.1)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

12 (26.5)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08082 Rev A Updated: May 25 2011 12:42AM

401

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.05

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

20.2 (44.5)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

PN7218.05 Updated: May 25 2011 12:36AM

402

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.09

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

20.2 (44.5)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08076 Rev A Updated: May 25 2011 12:37AM

403

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.15

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.3

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

22.3 (49.1)

Weight, without brackets, kg (lbs)

16.8 (37)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08079 Rev A Updated: May 25 2011 12:39AM

404

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7218.19

Single Band Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

X-Urban Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear slanted 45

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

Vertical beam squint ()

<0.4

Front to back ratio (dB) 180 30 coplanar

>24

Front to back ratio (dB) 180 30 total power

>20

Cross polar discrimination (XPD) 0 (dB)

>20

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

22.3 (49.1)

Weight, without brackets, kg (lbs)

16.8 (37)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

18 (39.7)

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08080 Rev A Updated: May 25 2011 12:40AM

405

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Band Antennas

POWERWAVE

Omni Vertical Polarized Antennas, 806-896 MHz

Single Band Antennas


Vertical Polarized
Omni Vertical Polarized Antennas, 806-896 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

360

11/8.9

FET

3.14m (10'4")

4168.21.33.00

407

360

11/8.9

FET

3.14m (10'4")

4168.21.33.03

408

360

11/8.9

FET

3m (910")

4168.11.33.00

409

360

11/8.9

FET

3m (910")

4168.11.33.02

410

360

11/8.9

FET

3m (910")

4168.11.33.03

411

360

11/8.9

FET

3m (910")

4168.11.33.06

412

360

11/8.9

FET

3m (910")

4168.11.33.52

413

406

POWERWAVE

4168.21.33.00

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3.14m (104)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3140x78 (104x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

204

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08113 Rev A Updated: Apr 5 2010 12:00PM

407

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.21.33.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3.14m (104)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3140x78 (104x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

204

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08114 Rev A Updated: Apr 5 2010 12:00PM

408

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.11.33.00

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3m (910)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3000x78 (910x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

194

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08105 Rev A Updated: Apr 5 2010 11:59AM

409

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.11.33.02

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3m (910)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3000x78 (910x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

194

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08109 RevA Updated: Apr 5 2010 11:59AM

410

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.11.33.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3m (910)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3000x78 (910x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

194

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08106 Rev A Updated: Apr 5 2010 11:59AM

411

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.11.33.06

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3m (910)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3000x78 (910x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

194

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08107 Rev A Updated: Apr 5 2010 12:00PM

412

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

4168.11.33.52

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 11/8.9
TILT: FET
LENGTH: 3m (910)

Omni Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

11/8.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

360

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

2 uptilt

Side lobe suppression, vertical 1st upper (dB)

12

First null fill (dB)

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

3000x78 (910x3)

Mounting

Pre-mounted bracket

Weight, with brackets, kg (lbs)

12.5 (27.5)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

194

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

3300x150x170 (1010x6x7)

Shipping weight, kg (lbs)

16 (35.2)

Brackets

included

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08111 Rev A Updated: Apr 5 2010 12:00PM

413

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Single Band Antennas

POWERWAVE

Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Single Band Antennas


Vertical Polarized
Urban Vertical Polarized Antennas, 824-896/870-960 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

12.5/10.4

FET

0.7m (2'3")

7270.02

415

65

13/10.9

FET

0.7m (2'3")

7225.04

416

65

15.5/13.4

FET

1.3m (4'3")

7226.03

417

65

15.5/13.4

FET

1.3m (4'3")

7226.04

418

65

15.5/13.4

FET

1.3m (4'3")

7271.02

419

65

15/12.9

FET

1.3m (4'3")

7271.03

420

65

17.5/15.4

FET

2.6m (8'6")

7273.03

421

65

17/14.9

FET

1.9m (6'2")

7227.14

422

65

17/14.9

FET

1.9m (6'2")

7227.04

423

65

17/14.9

FET

2m (6'6")

7272.02

424

65

18/15.9

FET

2.6m (8'6")

7228.03

425

65

18/15.9

FET

2.6m (8'6")

7228.04

426

65

18/15.9

FET

2.6m (8'6")

7228.06

427

65

18/15.9

FET

2.6m (8'6")

7228.08

428

65

18/15.9

FET

2.6m (8'6")

7273.02

429

90

12/9.9

FET

0.7m (2'3")

7230.04

430

90

14/11.9

FET

1.3m (4'3")

7231.04

431

90

14/11.9

FET

1.3m (4'3")

7231.06

432

90

15/12.9

FET

1.9m (6'2")

7232.04

433

90

15/12.9

FET

1.9m (6'2")

7232.07

434

90

16.5/14.4

FET

2.6m (8'6")

7233.04

435

90

16.5/14.4

FET

2.6m (8'6")

7233.06

436

90

16.5/14.4

FET

2.6m (8'6")

7233.08

437

414

POWERWAVE

7270.02

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 12.5/10.4
TILT: FET
LENGTH: 0.7m (23)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

12.5/10.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

28

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>10

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>24

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

300

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

660x256x50 (22x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7.7 (16.9)

Weight, without brackets, kg (lbs)

4 (8.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

222

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

770x308x121 (26x1x5)

Shipping weight, kg (lbs)

8.3 (18.2)

Brackets

7456.00A,7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08048 Rev A Updated: Jun 6 2011 2:31AM

415

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7225.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 13/10.9
TILT: FET
LENGTH: 0.7m (23)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

13/10.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

26

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>9

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>25

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

300

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

660x256x50 (22x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

8.7 (19.1)

Weight, without brackets, kg (lbs)

5 (11)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

222

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

770x308x121 (26x1x5)

Shipping weight, kg (lbs)

6 (13.2)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08054 Rev A Updated: Jun 6 2011 2:25AM

416

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7226.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

15.5/13.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>25

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

10.7 (23.5)

Weight, without brackets, kg (lbs)

7 (15.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

8.5 (18)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08055 Rev A Updated: Jun 6 2011 2:26AM

417

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7226.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

15.5/13.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>23

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

10.7 (23.5)

Weight, without brackets, kg (lbs)

7 (15.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

8.5 (18)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08056 Rev A Updated: Jun 6 2011 2:26AM

418

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7271.02

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.5/13.4
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

15.5/13.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>24

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2 )

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

10.7 (23.5)

Weight, without brackets, kg (lbs)

7 (15.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

8.5 (18.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08049 Rev A Updated: Jun 6 2011 2:31AM

419

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7271.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

15/12.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>24

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x256x50 (44x10x2 )

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

10.7 (23.5)

Weight, without brackets, kg (lbs)

7 (15.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

493

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x308x121 (48x1x5)

Shipping weight, kg (lbs)

8.5 (18.7)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08050 Rev A Updated: Jun 6 2011 2:31AM

420

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7273.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

17.5/15.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>22

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

17.7 (39)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2650x308x121 (88x1x5)

Shipping weight, kg (lbs)

18.8 (41.4)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08128 Rev A Updated: Jun 6 2011 2:32AM

421

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7227.14

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (62)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17/14.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-13

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>23

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIM female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

14.1 (31)

Weight, without brackets, kg (lbs)

10.4 (22.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1199

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

13 (29)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:17AM

422

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7227.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9
TILT: FET
LENGTH: 1.9m (62)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

17/14.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-13

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>23

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

14.1 (31)

Weight, without brackets, kg (lbs)

10.4 (22.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (69x1x5)

Shipping weight, kg (lbs)

13 (29)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08057 Rev A Updated: Jun 6 2011 2:27AM

423

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7272.02

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17/14.9
TILT: FET
LENGTH: 2m (66)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

17/14.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

9.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

>-20

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x256x50 (64x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

14.7 (32.4)

Weight, without brackets, kg (lbs)

11 (24.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

794

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x308x121 (48x1x5)

Shipping weight, kg (lbs)

14.8 (32.6)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08051 Rev A Updated: Jun 6 2011 2:32AM

424

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7228.03

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18.0/15.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>19

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>23

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x N-female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

10.3 (22.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082/139/1091

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

17.0 (37.9)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:27AM

425

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7228.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18.0/15.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>19

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>23

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

10.3 (22.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082/139/1091

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

17.0 (37.9)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 2:27AM

426

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7228.06

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>25

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

10.3 (22.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082/139/1091

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

17 (379)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08059 Rev A Updated: Jun 6 2011 2:27AM

427

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7228.08

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

18/15.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>25

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

16.5 (36.3)

Weight, without brackets, kg (lbs)

10.3 (22.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082/139/1091

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x308x121 (810x1x5)

Shipping weight, kg (lbs)

17 (379)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08060 Rev A Updated: Jun 6 2011 2:28AM

428

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7273.02

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-896
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18/15.9
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-896

Frequency band (MHz)

824-896

Gain (dBi/dBd)

18/15.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>18

First null fill (dB)

>-20

Vertical beam squint ()

0.5

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x256x50 (86x10x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

17.7 (39)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1082

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2650x308x121 (88x1x5)

Shipping weight, kg (lbs)

18.8 (41.4)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08052 Rev A Updated: Jun 6 2011 2:32AM

429

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7230.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 12/9.9
TILT: FET
LENGTH: 0.7m (23)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

12/9.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

27

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>12

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

300

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

695x160x55 (23x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

7 (15.4)

Weight, without brackets, kg (lbs)

3.3 (7.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

154

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

805x216x156 (28x9x6)

Shipping weight, kg (lbs)

7.5 (16.5)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08061 Rev A Updated: Jun 6 2011 2:28AM

430

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7231.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14/11.9
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

14/11.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x160x55 (44x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x216x156 (48x9x6)

Shipping weight, kg (lbs)

11 (24.2)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08062 Rev A Updated: Jun 6 2011 2:28AM

431

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7231.06

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14/11.9
TILT: FET
LENGTH: 1.3m (43)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

14/11.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x160x55 (44x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

9.7 (21.3)

Weight, without brackets, kg (lbs)

6 (13.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

281

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1430x216x156 (48x9x6)

Shipping weight, kg (lbs)

11 (24.2)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08063 Rev A Updated: Jun 6 2011 2:29AM

432

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7232.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.9m (62)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

15/12.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x160x55 (64x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

13.7 (30.2)

Weight, without brackets, kg (lbs)

10 (22)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

502

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x216x156 (69x9x6)

Shipping weight, kg (lbs)

15 (33)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08064 Rev A Updated: Jun 6 2011 2:29AM

433

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7232.07

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 15/12.9
TILT: FET
LENGTH: 1.9m (62)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

15/12.9

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>15

First null fill (dB)

>-15

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1940x160x55 (64x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

13.7 (30.2)

Weight, without brackets, kg (lbs)

10 (22)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

502

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2050x216x156 (69x9x6)

Shipping weight, kg (lbs)

15 (33)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08065 Rev A Updated: Jun 6 2011 2:29AM

434

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7233.04

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x160x55 (86x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

13.8 (30.4)

Weight, without brackets, kg (lbs)

8.3 (18.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

680

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x216x156 (810x9x6)

Shipping weight, kg (lbs)

15 (33)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08066 Rev A Updated: Jun 6 2011 2:30AM

435

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7233.06

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x160x55 (86x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

13.8 (30.4)

Weight, without brackets, kg (lbs)

8.3 (18.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

680

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x216x156 (810x9x6)

Shipping weight, kg (lbs)

15 (33)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08067 Rev A Updated: Jun 6 2011 2:30AM

436

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7233.08

Single Band Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 870-960
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.5/14.4
TILT: FET
LENGTH: 2.6m (86)

Urban Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

870-960

Frequency band (MHz)

870-960

Gain (dBi/dBd)

16.5/14.4

Polarization

Linear vertical

Nominal Impedance ()

50

VSWR

<1.3:1

Horizontal beam width, -3 dB ()

90

Vertical beam width, -3 dB ()

6.5

Electrical down tilt ()

Side lobe suppression, vertical 1st upper (dB)

>17

First null fill (dB)

>-20

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>20

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2580x160x55 (86x6x2)

Mounting

Pre-mounted standard bracket

Weight, with brackets, kg (lbs)

13.8 (30.4)

Weight, without brackets, kg (lbs)

8.3 (18.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

680

Maximum operational wind speed, m/s (mph)

42

Survival wind speed, m/s (mph)

55

Lightning protection

DC grounded

Operating Temperature
Radome Material

PVC

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2690x216x156 (810x9x6)

Shipping weight, kg (lbs)

15 (33)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-8068 Rev A Updated: Jun 6 2011 2:30AM

437

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Dual Band Antennas

POWERWAVE

ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Dual Band Antennas


Vertical Polarized
ALVC Vertical Polarized Antennas, 806-896/1850-1990 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

14.5/12.4, 17.5/15.4

MET

1.3m (4'3")

7840.00

439

70

14.5/12.4, 17.5/15.4

FET

1.4m (4'7")

7333.02B

440

70

14.5/12.4, 17.5/15.4

FET

1.4m (4'7")

7333.00B

441

70

14.5/12.4, 17.5/15.4

FET

1.4m (4'7")

7333.06B

442

80

14.0/11.9, 17.0/14.9

FET

1.4m (4'7")

7332.02B

443

80

14.0/11.9, 17.0/14.9

FET

1.4m (4'7")

7332.06B

444

90

13.5/12.4, 16.5/14.4

FET

1.4m (4'7")

7334.02B

445

90

13.5/12.4, 16.5/14.4

FET

1.4m (4'7")

7332.00B

446

90

13.5/12.4, 16.5/14.4

FET

1.4m (4'7")

7334.00B

447

90

13.5/12.4, 16.5/14.4

FET

1.4m (4'7")

7334.06B

448

90

14.0/11.9, 17.0/14.9

FET

1.3m (4'3")

7850.00B

449

438

POWERWAVE

7840.00

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.5/12.4, 17.5/15.4
TILT: MET
LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

824-896

1850-1990

Gain (dBi/dBd)

14/11.9

17.5/15.4

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

73

68

Vertical beam width, -3 dB ()

15

Electrical down tilt ()

0-12

0-8

Side lobe suppression, vertical 1st upper (dB)

>15

>15

VSWR

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-18

<0.5

<0.5

>25

>25

<-150

<-150

400

200

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1331x280x125 (44x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

17.5 (38.5)

Weight, without brackets, kg (lbs)

12 (26.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

388

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1495x355x255 (411x12x10)

Shipping weight, kg (lbs)

15.8 (34.8)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031- Updated: May 6 2011 6:14AM

439

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7333.02B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 70
GAIN (dBi dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14.8/12.7

17.6/15.5

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

72

71

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

>16/16

>16/16

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-17

<0.5

<0.5

>28

>28

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev. A Updated: May 6 2011 3:06AM

440

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7333.00B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 70
GAIN (dBi dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14.8/12.7

17.6/15.5

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

72

70

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

>16

>16

-17

<0.5

<0.5

>28

>28

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08154 Rev A Updated: May 6 2011 5:22AM

441

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7333.06B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 70
GAIN (dBi dBd): 14.5/12.4, 17.5/15.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14.8/12.7

17.6/15.5

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

72

71

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

>16/16

>16/16

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-17

<0.5

<0.5

>28

>28

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08155 Rev A Updated: May 6 2011 5:23AM

442

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7332.02B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 80
GAIN (dBi dBd): 14.0/11.9, 17.0/14.9
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14/11.9

17.2/15.1

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()
VSWR

50

50

<1.4:1

<1.4:1

81

79

15.5

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()
Electrical down tilt ()
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

>16

>16

-17

<0.5

<0.5

>27

>27

<-150

<-150

350

350

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev. A Updated: May 6 2011 3:03AM

443

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7332.06B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 80
GAIN (dBi dBd): 14.0/11.9, 17.0/14.9
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14/11.9

17.2/15.1

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()
VSWR

50

50

<1.4:1

<1.4:1

81

79

15.5

Horizontal beam width, -3 dB ()


Vertical beam width, -3 dB ()
Electrical down tilt ()
Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

>16

>16

-17

<0.5

<0.5

>27

>27

<-150

<-150

350

350

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08153 Rev A Updated: May 6 2011 5:22AM

444

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7334.02B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

13.5/11.4

16.5/14.4

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

89

91

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

>16/16

>16/16

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-17

<0.5

<0.5

>26

>26

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev. A Updated: May 6 2011 3:08AM

445

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7332.00B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

13.5/12.4

17.6/15.516.5/14.4

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

1850-1990

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

89

91

Vertical beam width, -3 dB ()

15

Electrical down tilt ()

>16

>16

VSWR

Side lobe suppression, vertical 1st upper (dB)


First null fill (dB)
Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)
Power handling, average total (W)

-17

<0.5

<0.5

>26

>26

<-150

<-150

350

175

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08152 Rev A Updated: May 6 2011 5:13AM

446

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7334.00B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

14/11.9

16.5/14.4

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

89

91

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)
First null fill (dB)
Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

>16

>16

-17

<0.5

<0.5

>26

>26

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08156 Rev A Updated: May 6 2011 5:26AM

447

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7334.06B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 13.5/12.4, 16.5/14.4
TILT: FET
LENGTH: 1.4m (47)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

13.5/11.4

16.5/14.4

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()

50

50

<1.4:1

<1.4:1

Horizontal beam width, -3 dB ()

89

91

Vertical beam width, -3 dB ()

15

VSWR

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

>16/16

>16/16

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-17

<0.5

<0.5

>26

>26

<-150

<-150

350

175

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

1 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1350x280x125 (45x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

14.9 (32.8)

Weight, without brackets, kg (lbs)

9.4 (20.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

394

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1520x355x200 (5x12x10)

Shipping weight, kg (lbs)

13.9 (30.6)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08157 Rev A Updated: May 6 2011 5:28AM

448

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7850.00B

Dual Band Antennas

ALVC Vertical Polarized

POLARIZATION: V-Pol
FREQUENCY (MHz): 806-896, 1850-1990
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 14.0/11.9, 17.0/14.9
TILT: 0-12/0-8
LENGTH: 1.3m (43)

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

806-896

1850-1990

Frequency band (MHz)

806-896

1850-1990

Gain (dBi/dBd)

13.8/11.7

16/13.9

Vertical linear

Vertical linear

Polarization
Nominal Impedance ()
VSWR

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

90

90

Vertical beam width, -3 dB ()

15

6.5

Electrical down tilt ()

0-12

0-8

Side lobe suppression, vertical 1st upper (dB)

>18

>18

First null fill (dB)


Vertical beam squint ()
Front to back ratio (dB) 180 30 coplanar
IM3, 2xTx&43dBm (dBc)

-18

<0.5

<0.5

>26

>26

<-150

<-150

400

200

Power handling, average total (W)

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1331x280x125 (44x11x5)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

17.5 (38.5)

Weight, without brackets, kg (lbs)

12 (26.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

388

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (198)

Lightning protection

DC grounded

Operating Temperature
Radome Material

GRP

Radome colour

Light gray RAL 7035 on all visible plastic parts

Packing size, HxWxD, mm (ft)

1495x355x255 (411x12x10)

Shipping weight, kg (lbs)

15.8 (34.8)

RET

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08181 Rev A Updated: May 6 2011 6:16AM

449

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

iRET Antennas

The iRET antenna family is the next iteration of


Powerwaves innovative antenna product line, which
integrates remote electrical tilt functionality under the
antenna radome, delivering maximized functionality
and improved aesthetics, while eliminating installation
and reliability issues that can occur with typical exterior
RET modules.

iRET Antennas

POWERWAVE

iRET Antennas

Page
Low Broadband Cross Polarized iRET Antennas, 698-894MHz

452

Dual Broadband Cross Polarized iRET Antennas, 698-894/1710-2170MHz

456

Triple High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

463

High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

483

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

489

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700MHz

493

Dual High Broadband Cross Polarized iRET Antennas, 2300-2700MHz

496

451

iRET Antennas

POWERWAVE

Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

iRET Antennas
Cross Polarized
Low Broadband Cross Polarized iRET Antennas, 698-894 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

14.7/12.6

0-13

1.3m(51)

P65-15-XL-R

453

65

15.5/13.4

2-10

1.8m(72)

P65-16-XL-R

454

65

17.0/14.9

0-6

2.4m(96)

P65-17-XL-R

455

452

POWERWAVE

P65-15-XL-R

Very Low Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.9/12.8
TILT: 0-13
LENGTH: 51 (1295mm)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

14.0/11.9

14.9/12.8

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

50

50

< 1.5:1

< 1.5:1

69

63

Vertical beam width, -3 dB ()

17.5

15.5

Electrical down tilt ()

0 - 13

0 - 13

Side lobe suppression, vertical 1st upper (dB)

> 18

> 18

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 24

> 24

Front to back ratio (dB) 180 30 total power

> 19

> 18

Cross polar discrimination (XPD) 0 (dB)

> 18

> 18

Cross polar discrimination (XPD) 60 (dB)

> 10

>8

<-153

<-153

IM3, 2xTx&43dBm (dBc)


Power handling, average per input (W)
Power handling, average total (W)

500

500

1000

1000

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female,2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1295 x 305 x 152 (51 x 12 x 6)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

15.3 (34)

Weight, without brackets, kg (lbs)

11 (25)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

920

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1475 x 400 x 255 (58 x 16 x 10)

Shipping weight, kg (lbs)

18.7 (41)

RET

iRET AISGv1.1, MET and AISGv2.0 Available

Brackets

7253.00 Available as option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 30 2011 4:49AM

453

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P65-16-XL-R

Very Low Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.0/13.9
TILT: 1-12
LENGTH: 72 (1829mm)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

15.2/13.1

16.0/13.9

Polarization

Dual Linear +/- 45

Nominal Impedance ()

50

VSWR

< 1.5:1

Horizontal beam width, -3 dB ()

69

Vertical beam width, -3 dB ()

14

Electrical down tilt ()

62
12
1-12

Side lobe suppression, vertical 1st upper (dB)

> 18

> 18

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 26

> 25

Front to back ratio (dB) 180 30 total power

> 21

> 20

Cross polar discrimination (XPD) 0 (dB)

> 18

> 16

Cross polar discrimination (XPD) 60 (dB)

> 10

IM3, 2xTx&43dBm (dBc)

>9
<-153

Power handling, average per input (W)

500

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female, 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1829 x 305 x 152 (72 x 12 x 6)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

18.3 (40)

Weight, without brackets, kg (lbs)

14 (31)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1380

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40 to +60 C

Radome Material

PVC IP55

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2082 x 400 x 255 (87 x 16 x 10)

Shipping weight, kg (lbs)

22.9 (50)

RET

iRET AISGv1.1, MET and AISGv2.0

Brackets

7253.00 Available as option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 30 2011 12:42PM

454

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P65-17-XL-R

Very Low Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.5/15.4
TILT: 0-7
LENGTH: 96 (2438mm)

Very Low Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

Frequency band (MHz)

698-806

806-894

Gain (dBi/dBd)

16.6/14.5

17.5/15.4

Dual Linear +/- 45

Dual Linear +/- 45

Polarization
Nominal Impedance ()
VSWR

50

50

< 1.5:1

< 1.5:1

Horizontal beam width, -3 dB ()

67

62

Vertical beam width, -3 dB ()

9.0

8.0

Electrical down tilt ()

0-7

0-7

Side lobe suppression, vertical 1st upper (dB)

> 18

> 18

Isolation between inputs (dB)

> 30

> 30

Tracking, horizontal plane 60 (dB)

< 2.0

< 2.0

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 24

> 22

Front to back ratio (dB) 180 30 total power

> 19

> 18

Cross polar discrimination (XPD) 0 (dB)

> 18

> 18

Cross polar discrimination (XPD) 60 (dB)

> 9.0

> 6.9

IM3, 2xTx&43dBm (dBc)

<-153

<-153

Power handling, average per input (W)


Power handling, average total (W)

500

500

1000

1000

MECHANICAL SPECIFICATIONS*
Connector

2 X 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2438 x 305 x 152 (96 x 12 x 6)

Mounting

Pre-mounted tilt brackets

Weight, with brackets, kg (lbs)

24.1 (54)

Weight, without brackets, kg (lbs)

20 (44)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1840

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725 x 400 x 255 (107 x 16 x 10)

Shipping weight, kg (lbs)

29.7(65)

RET

iRET AISGv1.1, MET and AISGv2.0

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 30 2011 4:44AM

455

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

Dual Broadband Cross Polarized iRET 698-894/1710-2170MHz

iRET Antennas
Cross Polarized
Dual Broadband Cross Polarized iRET Antennas 698-894/1710-2170MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65, 65

14.7/12.6, 17.0/14.9

0-13/0-9

1.3m (51)

P65-15-XLH-RR

457

65, 65

15.5/13.4 17.5/15.4

2-10/0-10

1.8m (72)

P65-16-XLH-RR

458

65, 65

17.2/15.1 17.5/15.4

0-6/0-10

2.4m (96)

P65-17-XLH-RR

459

85, 85

13.7/11.6 15.7/13.6

0-13/0-8

1.2m (48)

P90-14-XLH-RR

460

90, 90

14.5/12.4 16.3/14.2

0-11/0-8

1.8m (72)

P90-15-XLH-RR

461

90, 90

16.1/14.0 16.3/14.2

0-6/0-8

2.4m (96)

P90-16-XLH-RR

462

456

POWERWAVE

P65-15-XLH-RR

Dual Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 14.7/12.6, 17.0/14.9
TILT: 0-13, 0-9
LENGTH: 51

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14/11.9

14.7/12.6

16.4/14.3

16.7/14.6

17.0/14,9

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

73

63

Vertical beam width, -3 dB ()

17

65

61

Electrical down tilt ()

0-13

0-9

Side lobe suppression, vertical 1st upper (dB)

> 14

>20

Isolation between inputs (dB)

>30

> 30

Inter band Isolation (dB)

> 40

> 40

Tracking, horizontal plane 60 (dB)

<2

<2

<1.25

< 0.5

Front to back ratio (dB) 180 30 copolar

> 25

> 28

Front to back ratio (dB) 180 30 total power

> 25

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

500

300

Power handling, average total (W)

1000

600

Vertical beam squint ()

IM3, 2xTx&43dBm (dBc)

60

7.5

MECHANICAL SPECIFICATIONS*
Connector

4 X 7/16 DIN Female, IP67

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1290 x 312.5 x 147.5 (51x12x6)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

19 (41)

Weight, without brackets, kg (lbs)

14 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

404 / 75 / 511

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC, IP55

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1524 x 400 x 255 (60 x 16 x 10)

Shipping weight, kg (lbs)

24 (52)

RET

iRET AISGv1.1, MET and AISGv2.0

Brackets

7253.00 Available as option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 23 2011 5:25PM

457

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P65-16-XLH-RR

Dual Broadband Antennas


POLARIZATION: Dual linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 15.5/13.4 17.5/15.4
TILT: 1-12, 0-8
LENGTH: 72

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

14.8/12.7

15.5/13.4

16.9/14.8

17.2/15.1

17.5/15.4

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

66

65

60

63

63

14.7

12.5

6.8

6.4

5.7

>16

> 16

Electrical down tilt ()

1 to 12

0 to 8

Side lobe suppression, vertical 1st upper (dB)

> 16
>16

>16

Isolation between inputs (dB)

> 30

> 30

Inter band Isolation (dB)

> 30

> 40

Tracking, horizontal plane 60 (dB)

> 30
> 40

<2

First null fill (dB)

<2

<2

<2

>-20

>-20

>-20

Vertical beam squint ()

< 0.8

< 0.8

< 0.5

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

>24

>24

> 30

>30

>28

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

> 15

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

> 10

> 10

> 10

Front to back ratio (dB) 180 30 total power

Far field coupling


IM3, 2xTx&43dBm (dBc)

<-153

<-153

Power handling, average per input (W)

500

250

Power handling, average total (W)

1000

500

IM7, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

4 X 7/16 DIN Female, IP67

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1829x312.5x147.5 (72x12x6)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

29 (64)

Weight, without brackets, kg (lbs)

24 (53)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

708 / 108 / 896

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

150 (67)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC, IP55

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2225 x 400 x 225 (87 x 16 x 10)

Shipping weight, kg (lbs)

34 (75)

RET

iRET AISGv1.1, MET and AISGv2.0

Brackets

7253.00 Available as Option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Aug 23 2011 5:33PM

458

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Dual Broadband Antennas

POWERWAVE

P65-17-XLH-RR

POLARIZATION: Dual linear 45


FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 65, 65
GAIN (dBi dBd): 17.2/15.1 17.5/15.4
TILT: 0-7, 0-8
LENGTH: 96

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.4/14.3

17.2/15.1

16.9/14.8

17.2/15.1

17.5/15.4

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

70

63

Vertical beam width, -3 dB ()

60

63

8.4

6.5

Electrical down tilt ()

0 to 7

0 to 8

Side lobe suppression, vertical 1st upper (dB)

> 16

> 16

Isolation between inputs (dB)

> 30

> 30

Inter band Isolation (dB)

> 40

Tracking, horizontal plane 60 (dB)

<2

<2

Vertical beam squint ()

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

> 25

> 30

Front to back ratio (dB) 180 30 total power

> 22

> 25

Cross polar discrimination (XPD) 0 (dB)

> 15

> 15

Cross polar discrimination (XPD) 60 (dB)

10

10

<-153

<-153

Power handling, average per input (W)

500

300

Power handling, average total (W)

1000

600

IM3, 2xTx&43dBm (dBc)

60

MECHANICAL SPECIFICATIONS*
Connector

4 X 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2439x312.5x147.5(96x12x6 )

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

32 (70)

Weight, without brackets, kg (lbs)

27 (59)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

1006 / 147 / 1273

Maximum operational wind speed, m/s (mph)

45 (100 )

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40 to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725 x 400 x 255(107 x 16 x 10)

Shipping weight, kg (lbs)

37 (81)

RET

iRET AISGv1.1, MET and AISGv2.0 Available

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 26 2011 1:34PM

459

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P90-14-XLH-RR

Dual Broadband Antennas


POLARIZATION: Dual Linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 85,85
GAIN (dBi dBd): 13.7/11.6 15.7/13.6
TILT: 0-13, 0-9
LENGTH: 52

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

13.0/10.9

13.7/11.6

15.1/13.0

15.4/13.3

15.7/13.6

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

86

83

85

84

Vertical beam width, -3 dB ()

15.0

Electrical down tilt ()

0-13

0-9

Side lobe suppression, vertical 1st upper (dB)

> 12

> 16

Isolation between inputs (dB)

> 30

> 30

Inter band Isolation (dB)

> 40

Tracking, horizontal plane 60 (dB)

<2

<2

< 1.25

< 0.5

Front to back ratio (dB) 180 30 copolar

> 25

> 25

Front to back ratio (dB) 180 30 total power

> 22

> 22

Cross polar discrimination (XPD) 0 (dB)

> 10

> 15

Cross polar discrimination (XPD) 60 (dB)

> 10

> 10

<-153

<-153

Power handling, average per input (W)

500

300

Power handling, average total (W)

1000

600

Vertical beam squint ()

IM3, 2xTx&43dBm (dBc)

85

7.0

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female, IP67

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1315 x 280 x 186 (52 x 11 x 7)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

19 (41)

Weight, without brackets, kg (lbs)

14 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

388 / 195 / 466

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC, IP55

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1500 x 400 x 255 (59 x 16 x 10 )

Shipping weight, kg (lbs)

24 (52)

RET

iRET AISGv1.1, MET and AISGv2.0 Available

Brackets

7253.00 Available as option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Oct 25 2011 7:10PM

460

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P90-15-XLH-RR

Dual Broadband Antennas


POLARIZATION: Dual Linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 90, 90
GAIN (dBi dBd): 14.5/12.4 16.3/14.2
TILT: 0-11, 0-8
LENGTH: 72

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

13.8/11.7

14.5/12.4

15.7/13.6

16.0/13.9

16.3/14.2

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

Horizontal beam width, -3 dB ()

86

84

88

80

80

Vertical beam width, -3 dB ()

14

12

6.5

Electrical down tilt ()

0 to 11

0 to 8

Side lobe suppression, vertical 1st upper (dB)

> 16

>16

>18

>17

>15

Isolation between inputs (dB)

> 30

> 30

> 30

> 30

> 30

<2

<2

<2

<2

<2

Inter band Isolation (dB)

> 40

Tracking, horizontal plane 60 (dB)

> 40

First null fill (dB)


Vertical beam squint ()

< 0.8

< 0.8

< 0.5

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

25

25

> 23

> 27

> 30

Front to back ratio (dB) 180 30 total power

22

22

> 22

> 22

> 22

> 15

> 15

> 15

> 15

> 15

10

10

10

10

10

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling
IM3, 2xTx&43dBm (dBc)

<-153

<-153

Power handling, average per input (W)

500

300

Power handling, average total (W)

1000

600

IM7, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female, IP67, 4 x AISG [2 x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1810 x 280 x 186 (72 x 11 x 7)

Mounting

Pole Mounting Bracket

Weight, with brackets, kg (lbs)

22.3 (49)

Weight, without brackets, kg (lbs)

18.6 (41)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

575 / 281 / 690

Maximum operational wind speed, m/s (mph)

45 (100)

Survival wind speed, m/s (mph)

67 (150)

Lightning protection

DC Ground

Operating Temperature

-40C to +60C

Radome Material

PVC, IP55

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2000 x 421 x 366 (78 x 17 x 14)

Shipping weight, kg (lbs)

28.2 (64)

RET

iRET AISGv1.1, MET and AISGv2.0 Available

Brackets

7253.00 Available as Option

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Nov 10 2011 6:12PM

461

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P90-16-XLH-RR

Dual Broadband Antennas


POLARIZATION: Dual Linear 45
FREQUENCY (MHz): 698-894, 1710-2170
HORIZONTAL BEAM WIDTH (): 90, 90
GAIN (dBi dBd): 16.1/14.0 16.3/14.2
TILT: 0-7, 0-8
LENGTH: 96

Dual Broadband Antennas

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

698-894

1710-2170

Frequency band (MHz)

698-806

806-894

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

15.4/13.3

16.1/14.0

15.7/13.6

16.0/13.9

16.3/14.2

Polarization

Dual Linear +/- 45

Nominal Impedance ()
VSWR

Dual Linear +/- 45

50

50

< 1.5:1

< 1.5:1

Horizontal beam width, -3 dB ()

83

84

87

84

83

Vertical beam width, -3 dB ()

8.7

6.6

Electrical down tilt ()

0-7

0-8

Side lobe suppression, vertical 1st upper (dB)

> 16

>16

>16

>16

>16

Isolation between inputs (dB)

> 30

> 30

> 30

> 30

> 30

<2

<2

<2

<2

<2
< 0.5

Inter band Isolation (dB)

> 40

Tracking, horizontal plane 60 (dB)

> 40

First null fill (dB)


Vertical beam squint ()

< 0.8

< 0.8

< 0.5

< 0.5

Front to back ratio (dB) 180 30 copolar

25

25

>21

>24

>27

Front to back ratio (dB) 180 30 total power

22

22

> 22

> 22

> 22

> 15

> 15

> 15

> 15

> 15

10

10

10

10

10

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling
IM3, 2xTx&43dBm (dBc)

<-153

<-153

Power handling, average per input (W)

500

300

Power handling, average total (W)

1000

600

IM7, 2xTx&43dBm (dBc)

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female, Extended Shank

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2448 x 280 x 186 (96x11x7)

Mounting

Pre-mounted Tilt Brackets

Weight, with brackets, kg (lbs)

32 (70)

Weight, without brackets, kg (lbs)

27 (59)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

822 / 384 / 988

Maximum operational wind speed, m/s (mph)

100 (45)

Survival wind speed, m/s (mph)

150 (67)

Lightning protection

DC Ground

Operating Temperature

-40 to +70C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2725 X 400 X 255 (107 X 16 X 10)

Shipping weight, kg (lbs)

(37) 81

RET

iRET AISGv1.1, MET and AISGv2.0 Available

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 7 2011 12:31AM

462

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

Triple Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized
Triple Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal
Beamwidth
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65
65

Gain dBi dBd


14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
14.7/12.6, 14.6/12.5,
14.6/12.5
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
16.2/14.1, 16.5/14.4,
16.5/14.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4
17.4/15.3, 17.2/15.1,
17.5/15.4

Tilt

Length

Part Number

Page

0-20/0-12/0-12 1.3m(43)

8780.0ST.0000.00

464

0-20/0-12/0-12 1.4m(47)

8780.0ST.B100.00

465

0-20/0-12/0-12 1.4m(47)

8780.0ST.B100.04

466

0-20/0-12/0-12 1.4m(47)

8780.0ST.B400.00

467

0-20/0-12/0-12 1.4m(47)

8780.0ST.B400.02

468

0-20/0-12/0-12 1.4m(47)

8780.0ST.B400.04

469

0-20/0-12/0-12 2.0m(66)

8782.0ST.0000.00

470

0-20/0-12/0-12 2.0m(66)

8782.0ST.B100.00

471

0-20/0-12/0-12 2.0m(66)

8782.0ST.B100.02

472

0-20/0-12/0-12 2.0m(66)

8782.0ST.B100.04

473

0-20/0-12/0-12 2.0m(66)

8782.0ST.B400.00

474

0-20/0-12/0-12 2.0m(66)

8782.0ST.B400.02

475

0-20/0-12/0-12 2.0m(66)

8782.0ST.B400.04

476

0-10/0-10/0-10 2.6m(86)

8785.0ST.0000.00

477

0-10/0-10/0-10 2.6m(86)

8785.0ST.B100.00

478

0-10/0-10/0-10 2.6m(86)

8785.0ST.B100.04

479

0-10/0-10/0-10 2.6m(86)

8785.0ST.B400.00

480

0-10/0-10/0-10 2.6m(86)

8785.0ST.B400.02

481

0-10/0-10/0-10 2.6m(86)

8785.0ST.B400.04

482

463

POWERWAVE

8780.0ST.0000.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

17.5 (38.6)

Weight, without brackets, kg (lbs)

12 (26.4)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

21.5 (47.4)

RET

No iRET module attached

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009 Updated: Mar 23 2011 9:49AM

464

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8780.0ST.B100.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19 (42)

Weight, without brackets, kg (lbs)

13.5 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

23 (50.7)

RET

AISG1.1 (AISG2.0/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.01 / Dec 20 2009 Updated: Mar 23 2011 9:49AM

465

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8780.0ST.B100.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.9)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature
Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

22.5 (49.6)

RET

AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 6 2011 12:33AM

466

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8780.0ST.B400.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19 (42)

Weight, without brackets, kg (lbs)

13.5 (30)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

23 (50.7)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 9:48AM

467

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8780.0ST.B400.02

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 2x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18 (39.6)

Weight, without brackets, kg (lbs)

12.5 (27.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

22 (48.5)

RET

AISG2.0 (AISG1.1/Ericsson) on WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 9:51AM

468

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8780.0ST.B400.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 14.7/12.6, 14.6/12.5, 14.6/12.5
TILT: 0-20/0-12/0-12
LENGTH: 1.4m(47)

i-RET ANTENNA TBB65 1.4m ALXT824-960/1710-2170-65-14.7i/15i/15i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

14.1/12

14.7/12.6

14.4/12.3

14.6/12.5

14.8/12.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()
Vertical beam width, -3 dB ()

Dual linear 45

50

50

<1.5:1

<1.5:1

71

67

65

64

64

14.9

13.9

13.3

12.6

12

Electrical down tilt ()

0 - 20

Side lobe suppression, vertical 1st upper (dB)

0 - 12

>18,17,16,16@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

>17,16,15,14@

2,4,8,12

2,4,8,12

0,4,8,12

0,4,8,12

0,4,8,12

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

>38

>38

Tracking, horizontal plane 60 (dB)

<1

<2

<1.5

<1.2

<4

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.7

0.7

0.7

Front to back ratio (dB) 180 30 copolar

>27

>28

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>24

>24

>24

>24

>24

15

14

16

18

18

Cross polar discrimination (XPD) 60 (dB)

> 9.3

>7.7

>6

>5.5

> 5.5

Far field coupling

< 0.35

< 0.50

< 0.55

< 0.74

< 0.74

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x155mm (47x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.9)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

415

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1550x355x200 (51x12x7)

Shipping weight, kg (lbs)

22.5 (49.6)

RET

AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 9:50AM

469

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.0000.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0-12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

21.9 (48.2)

Weight, without brackets, kg (lbs)

16.4 (36.1)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

26.5 (58.4)

RET

No iRET module attached

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:31AM

470

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B100.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0-12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

23.4 (48)

Weight, without brackets, kg (lbs)

17.9 (39)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

28 (61.7)

RET

AISG1.1 (AISG2.0/Ericsson)

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:31AM

471

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B100.02

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 2x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.4 (49.3)

Weight, without brackets, kg (lbs)

16.9 (37.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

AISG1.1 (AISG2.0/Ericsson) on WHITE system

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:33AM

472

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B100.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.9 (50.4)

Weight, without brackets, kg (lbs)

17.4 (38.3)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:33AM

473

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B400.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

23.4 (48)

Weight, without brackets, kg (lbs)

17.9 (39)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

28 (61.7)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:31AM

474

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B400.02

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 2x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.4 (49.3)

Weight, without brackets, kg (lbs)

16.9 (37.2)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

AISG2.0 (AISG1.1/Ericsson) on WHITE system

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:32AM

475

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8782.0ST.B400.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.2/14.1, 16.5/14.4, 16.5/14.4
TILT: 0-12/0-12/0-12
LENGTH: 2.0m(66)

i-RET ANTENNA TBB65 2.0m ALXT824-960/1710-2170-65-16.2i/16.5i/16.5iAi-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.8/13.7

16.2/14.1

16.0/13.9

16.1/14

16.5/14.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

71

67

65

65

63

Vertical beam width, -3 dB ()

9.6

8.6

10

9.4

8.7

>18,17,16,16@

>18,17,16,16@

>17,15,13@

>17,15,14@

>17,16,15@

2,5,7,8

2,5,7,8

0,6,10

0,6,10

0,6,10

>30

>30

>30

>30

>30

Electrical down tilt ()

0 - 12

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 - 12

>34

Tracking, horizontal plane 60 (dB)

>34

<1.0

<1

<1.5

<2

First null fill (dB)

25

25

25

25

25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>30

>27

>28

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>27

>27

16

15

16

16

15

>11

>9.2

>6.7

>6.3

>6.3

<0.47

<0.52

<0.66

<0.66

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.27

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<4

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x155mm (68x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

22.9 (50.4)

Weight, without brackets, kg (lbs)

17.4 (38.3)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27.5 (60.6)

RET

AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Brackets

7256.00,7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:32AM

476

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.0000.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0-10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

26.2(57.7)

Weight, without brackets, kg (lbs)

20.7(45.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

31.5(69.4)

RET

No iRET module attached

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:00AM

477

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.B100.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0-10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.7(61)

Weight, without brackets, kg (lbs)

22.2(49)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

33(72.7)

RET

AISG1.1 (AISG2.0/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 9:59AM

478

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.B100.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0 - 10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0 - 10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.2(59.9)

Weight, without brackets, kg (lbs)

21.7(47.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

32.5(71.7)

RET

AISG1.1 (AISG2.0/Ericsson) on RED & WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:02AM

479

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.B400.00

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0 - 10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0 - 10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 6x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.7(61)

Weight, without brackets, kg (lbs)

22.2(49)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

33(72.7)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 9:59AM

480

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.B400.02

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0 - 10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0 - 10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 2x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

26.7(58.8)

Weight, without brackets, kg (lbs)

21.2(46.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

32(70.5)

RET

AISG2.0 (AISG1.1/Ericsson) on WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:01AM

481

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8785.0ST.B400.04

Triple Broadband Antennas


POLARIZATION: XXX-Pol
FREQUENCY (MHz): 824-960, 2x1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.4/15.3, 17.2/15.1, 17.5/15.4
TILT: 0-10/0-10/0-10
LENGTH: 2.6m(86)

i-RET ANTENNA TBB65 2.6m ALXT824-960/1710-2170-65-17.3i/18i/18i-AiD

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

2x1710-2170

Frequency band (MHz)

824-894

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

17.4/15.3

17.4/15.3

17.2/15.1

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

62

Vertical beam width, -3 dB ()

Electrical down tilt ()

0 - 10

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)

0 - 10

>17

>17

>17

>17

>17

30

30

30

30

30

Inter band Isolation (dB)

38

Tracking, horizontal plane 60 (dB)


First null fill (dB)

38

<2.0

<2.0

<1.5

<1.5

<1.5

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>28

>28

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

>27

>25

16

15

16

15

17

>12

>9.5

>7.0

>7.5

>7.7

<0.44

<0.47

<0.52

<0.52

Cross polar discrimination (XPD) 0 (dB)


Cross polar discrimination (XPD) 60 (dB)
Far field coupling

<0.24

IM3, 2xTx&43dBm (dBc)

<-153

IM7, 2xTx&43dBm (dBc)

<-153
<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

6x 7/16 DIN Female 4x AISG

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x155mm(88x11x6)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

27.2(59.9)

Weight, without brackets, kg (lbs)

21.7(47.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

55(123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2800x355x255(92x12x10)

Shipping weight, kg (lbs)

32.5(71.7)

RET

AISG2.0 (AISG1.1/Ericsson) on RED & WHITE system

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 23 2011 10:02AM

482

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized
High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

15.6/13.5

0-16

0.7m(23)

8720.0ST.B400.00

484

65

18.3/16.2

0-10

1.3m(43)

8721.0ST.B400.00

485

65

19.5/17.4

0-6

2.0m(66)

8722.0ST.B400.00

486

65

18.3/16.2

0-10

1.3m(43)

8721.0ST.0000.00

487

65

19.5/17.4

0-6

2.0m(66)

8722.0ST.0000.00

488

483

High Broadband Antennass

POWERWAVE

8720.0ST.B400.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15.6/13.5
TILT: 0-16
LENGTH: 0.7m(23)

i-RET ANTENNA HBB65 0.7m UXM1710-2170-65-15i-Ai-D AISGv2.0

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

15/12.9

15.1/13

15.6/13.5

Polarization

Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

14.1

13.5

12.5

>17,16,16,15,15@0,4,8,12,16

>17,16,16,15,15@0,4,8,12,16

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.5

<1.5

<1.5
>-29, typical >-25

Vertical beam width, -3 dB ()


Electrical down tilt ()

0-16

Side lobe suppression, vertical 1st upper (dB)

First null fill (dB)

>17,16,16,15,15@0,4,8,12,16

>-29, typical >-25

>-29, typical >-25

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>15

>15

>15

Cross polar discrimination (XPD) 60 (dB)

>15

>15

>13

<-153

<-153

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

709x167x89.5 (23x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

8.2 (18)

Weight, without brackets, kg (lbs)

4.5 (9.9)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

133 / 31 / 155

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

880x200x200 (211x8x8)

Shipping weight, kg (lbs)

11.5 (25.3)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7456.00A,7454.00A,7455.00,7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 4:45AM

484

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

High Broadband Antennass

POWERWAVE

8721.0ST.B400.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-10
LENGTH: 1.3m(43)

i-RET ANTENNA HBB65 1.3m UXM1710-2170-65-18i-Ai-D AISGv2.0

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

>18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24 typical >-17

First null fill (dB)

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

<-153

<-153

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 mm (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

11(24)

Weight, without brackets, kg (lbs)

7.3(16)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

285 / 60 / 333

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1480x200x200mm (410x8x8)

Shipping weight, kg (lbs)

14.7 (32.4)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7456.00A,7454.00A,7455.00,7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.03 / Feb 19 2010 Updated: Jun 6 2011 1:33AM

485

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

High Broadband Antennass

POWERWAVE

8722.0ST.B400.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-6
LENGTH: 2.0m(66)

i-RET ANTENNA HBB65 1.9m UXM1710-2170-65-19.5i-Ai-D AISGv2.0

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19.0/16.9

19.2/17.1

19.5/17.4

Gain (dBi/dBd)
Polarization

Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

65

Vertical beam width, -3 dB ()

4.7

4.4

4.2

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

0-6
>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20, typical >-16

First null fill (dB)

>-20, typical >-16

>-20, typical >-16

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>19

>19

>21

Cross polar discrimination (XPD) 60 (dB)

>20

>17

>12

<-153

<-153

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

MECHANICAL SPECIFICATIONS*
Connector

2x 7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934 x 167 x 89.5 (64 x 6 x 3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

14 (31)

Weight, without brackets, kg (lbs)

8.5 (18.7)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

423 / 90 / 494

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

2105 x 200 x 200 (611 x 8 x 8)

Shipping weight, kg (lbs)

15.5 (34.1)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7456.00A,7454.00A,7455.00,7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 4:46AM

486

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

High Broadband Antennass

POWERWAVE

8721.0ST.0000.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.3/16.2
TILT: 0-10
LENGTH: 1.3m(43)

i-RET ANTENNA HBB65 1.3m UXM1710-2170-65-18i-Ai-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.6/15.5

18.0/15.9

18.3/16.2

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

64

Vertical beam width, -3 dB ()

7.0

6.6

6.3

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

>18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10 >18,18,16,16,14,12 @ 0,2,4,6,8,10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-24 typical >-17

First null fill (dB)

>-24 typical >-17

>-24 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>17

>19

>20

Cross polar discrimination (XPD) 60 (dB)

>18

>14

>12

<-153

<-153

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

No iRET module attached [8510.40]

MECHANICAL SPECIFICATIONS*
Connector

2x7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1309x167x89.5 mm (43x6x3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

10.5(23.1)

Weight, without brackets, kg (lbs)

6.8(15)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

285 / 60 / 333

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

1480x200x200mm (410x8x8)

Shipping weight, kg (lbs)

14.2 (31.3)

RET

No iRET module attached [8510.40]

Brackets

7456.00A,7454.00A,7455.00,7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 6 2011 6:46AM

487

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

High Broadband Antennass

POWERWAVE

8722.0ST.0000.00

POLARIZATION: X-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 19.5/17.4
TILT: 0-6
LENGTH: 2.0m(66)

i-RET ANTENNA HBB65 1.9m UXM1710-2170-65-19.5i-Ai-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)

1710-1880

1850-1990

1920-2170

19.0/16.9

19.2/17.1

19.5/17.4

Gain (dBi/dBd)
Polarization

Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

66

65

Vertical beam width, -3 dB ()

4.7

4.4

4.2

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

0-6
>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6>18,18,18,16,16,14,14@0,1,2,3,4,5,6

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.0
>-20, typical >-16

First null fill (dB)

>-20, typical >-16

>-20, typical >-16

Vertical beam squint ()

0.4

0.4

0.4

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>19

>19

>21

Cross polar discrimination (XPD) 60 (dB)

>20

>17

>12

<-153

<-153

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-160

Power handling, average per input (W)

250

Power handling, average total (W)

500

No iRET module attached [8510.40]

MECHANICAL SPECIFICATIONS*
Connector

2x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1934 x 167 x 89.5 (64 x 6 x 3)

Mounting

Pre-mounted standard brackets

Weight, with brackets, kg (lbs)

13.5 (29.7)

Weight, without brackets, kg (lbs)

8 (17.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

423 / 90 / 494

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Gray

Packing size, HxWxD, mm (ft)

2105 x 200 x 200 (611 x 8 x 8)

Shipping weight, kg (lbs)

15 (33)

RET

No iRET module attached

Brackets

7456.00A,7454.00A,7455.00,7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 6 2011 6:47AM

488

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170 MHz

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized Antennas, 1710-2170 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

18.1/16.0

0-10

1.3m(43)

8760.0ST.B100.00

490

65

18.1/16.0

0-10

1.3m(43)

8760.0ST.B400.00

491

65

18.1/16.0

0-10

1.3m(43)

8760.0ST.0000.00

492

489

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

8760.0ST.B100.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10
LENGTH: 1.3m(43)

i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv1.1

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

>22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

First null fill (dB)

>-24,typical>-18

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

<2.0

<2.0

<2.0

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>16

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

529 / 63 / 615

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

AISG1.1 (AISG2.0/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 5:05AM

490

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

8760.0ST.B400.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.7/15.6, 17.9/15.8, 18.1/16.0
TILT: 0-10
LENGTH: 1.3m(43)

i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D AISGv2.0

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16.0

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

>22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

First null fill (dB)

>-24,typical>-18

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

<2.0

<2.0

<2.0

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>16

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

Daisy chain cable included

MECHANICAL SPECIFICATIONS*
Connector

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

529 / 63 / 615

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

AISG2.0 (AISG1.1/Ericsson)

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.02 / Feb 19 2010 Updated: Jan 25 2011 5:04AM

491

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

8760.0ST.0000.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.1/16.0
TILT: 0-10
LENGTH: 1.3m (43)

i-RET ANTENNA DHBB65 1.3m UXCM1710-2170-65-18i/18i-Ai-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

1710-2170

Frequency band (MHz)


Gain (dBi/dBd)

1710-1880

1850-1990

1920-2170

17.7/15.6

17.9/15.8

18.1/16

Polarization

Dual linear 45

Nominal Impedance ()

50

VSWR

<1.4:1

Horizontal beam width, -3 dB ()

67

65

64

Vertical beam width, -3 dB ()

7.1

6.8

6.2

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

>22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10 >22,20,18,16,14,14@0,2,4,6,8, 10

Isolation between inputs (dB)

>30

>30

>30

Tracking, horizontal plane 60 (dB)

<2.0

<2.0

<2.0

First null fill (dB)

>-24,typical>-18

>-24,typical>-18

>-24,typical>-18

Vertical beam squint ()

<2.0

<2.0

<2.0

Front to back ratio (dB) 180 30 copolar

>28

>28

>28

Front to back ratio (dB) 180 30 total power

>28

>28

>28

Cross polar discrimination (XPD) 0 (dB)

>16

>16

>20

Cross polar discrimination (XPD) 60 (dB)

>16

>13

>10

IM3, 2xTx&43dBm (dBc)

<-153

<-153

<-153

IM7, 2xTx&43dBm (dBc)

<-160

<-160

<-160

Far field coupling

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (44x11x3)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.8)

Weight, without brackets, kg (lbs)

13 (28.6)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

529 / 63 / 615

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (48x13x7)

Shipping weight, kg (lbs)

22.5 (49.6)

RET

No iRET module attached [8510.40]

Brackets

7256.00, 7454.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Rev1.1 / Feb 19 2010 Updated: Sep 6 2011 6:48AM

492

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET Antennas, 1710-2170/2300-2700 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

18.0/15.9, 18.0/15.9

0-10/0-10

0.7m(23)

P65-18-XHW2-RR

494

65

18.0/15.9, 18.0/15.9

0-10/0-10

1.3m (43)

P65-18-XHW2-MM

495

493

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P65-18-XHW2-RR

POLARIZATION: XX-Pol
FREQUENCY (MHz): 2500-2690, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9, 18.0/15.9
TILT: 0-10/0-10
LENGTH: 1.3m (43)

i-RET ANTENNA DBB65 1.3m 17102170/2500-2690-65-18i/18i-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2500-2690

Frequency band (MHz)

2500-2690

1710-1880

1850-1990

1900-2170

18.0/15.9

17.6/15.5

17.8/15.7

18.0/15.9

Gain (dBi/dBd)
Polarization

1710-2170

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

Vertical beam width, -3 dB ()

5.7

7.0

6.6

6.3

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

0 - 10

0 - 10

>20,18,15 @ 0,5,10

>20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @


0,2,4,6,8,10
0,2,4,6,8,10
0,2,4,6,8,10

Isolation between inputs (dB)

>30

Inter band Isolation (dB)

>35

Tracking, horizontal plane 60 (dB)


First null fill (dB)

>30

>30

>30

>35

<2

<2

<2

<2

>-24 typical >-17

>-20 typical >-17

>-20 typical >-17

>-20 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>27

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>15

>17

>17

>17

Cross polar discrimination (XPD) 60 (dB)

>10

>18

>14

>10

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-153

<-153

<-160

Power handling, average per input (W)

250

250

Power handling, average total (W)

500

500

MECHANICAL SPECIFICATIONS*
Connector

4x 7/16 DIN Female 4xAISG [2x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (52x13.5x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (42.9)

Weight, without brackets, kg (lbs)

14.0 (30.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

529/63/615

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (56x16x8)

Shipping weight, kg (lbs)

23.5 (51.8)

RET

2xiRET 8510.40 AISGv2.0/3GPP

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 16 2011 5:35AM

494

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P65-18-XHW2-MM

POLARIZATION: XX-Pol
FREQUENCY (MHz): 2500-2690, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9, 18.0/15.9
TILT: 0-10/0-10
LENGTH: 1.3m (43)

i-RET ANTENNA DBB65 1.3m 17102170/2500-2690-65-18i/18i-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2500-2690

Frequency band (MHz)

2500-2690

1710-1880

1850-1990

1900-2170

18.0/15.9

17.6/15.5

17.8/15.7

18.0/15.9

Gain (dBi/dBd)
Polarization

1710-2170

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

65

65

65

65

Vertical beam width, -3 dB ()

5.7

7.0

6.6

6.3

Electrical down tilt ()


Side lobe suppression, vertical 1st upper (dB)

0 - 10

0 - 10

>20,18,15 @ 0,5,10

>20,20,20,20,18,18 @ >20,20,20,20,18,18 @ >20,20,20,20,18,18 @


0,2,4,6,8,10
0,2,4,6,8,10
0,2,4,6,8,10

Isolation between inputs (dB)

>30

Inter band Isolation (dB)

>35

Tracking, horizontal plane 60 (dB)


First null fill (dB)

>30

>30

>30

>35

<2

<2

<2

<2

>-24 typical >-17

>-20 typical >-17

>-20 typical >-17

>-20 typical >-17

Vertical beam squint ()

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>27

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>27

>27

>27

Cross polar discrimination (XPD) 0 (dB)

>15

>17

>17

>17

Cross polar discrimination (XPD) 60 (dB)

>10

>18

>14

>10

Far field coupling


IM3, 2xTx&43dBm (dBc)
IM7, 2xTx&43dBm (dBc)

<-153

<-153

<-160

Power handling, average per input (W)

250

250

Power handling, average total (W)

500

500

MECHANICAL SPECIFICATIONS*
Connector

4x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1320x343x100 (52x13.5x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

18.5 (40.9)

Weight, without brackets, kg (lbs)

13.0 (28.8)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

529/63/615

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (56x16x8)

Shipping weight, kg (lbs)

22.5 (49.8)

RET

No iRET modules attached [8510.10]

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Mar 16 2011 5:35AM

495

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iRET Antennas

POWERWAVE

Dual High Broadband Cross Polarized iRET 2300-2700MHz

iRET Antennas
Cross Polarized
Dual High Broadband Cross Polarized iRET 2300-2700MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

65

18.0/15.9

0-10

1.2m(48)

P65-18-XXW2-R

497

65

18.0/15.9

0-10

1.2m(48)

P65-18-XXW2-M

498

90

16.1

0-10

1.2m(48)

P90-17-XXW2-R

499

90

16.1

0-10

1.2m(48)

P90-17-XXW2-M

500

496

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P65-18-XXW2-R

POLARIZATION: XX-Pol
FREQUENCY (MHz): 2496-2690
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0-10
LENGTH: 1.2m(48)

i-RET ANTENNA DVHBB65 1.2m


WXCM-2300-2690-65-18i/18i-Ai-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2496-2690

Frequency band (MHz)

2496-2690

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

5.5

Gain (dBi/dBd)

18.0/15.9

Electrical down tilt ()

0-10

Nominal Impedance ()

50

Return Loss (dB)

<-14

Side lobe suppression, vertical 1st upper (dB)

<18,16,15 @ 0,5,10

Port Isolation (dB)

>30

Front to back ratio @ 180 30

>27

Cross polar discrimination (XPD) 0 (dB)

>15

Cross polar discrimination (XPD)60 (dB)

>10

IM3, 2xTx&43dBm @ 2 minute duration(dBc)

<-110

HBW Squint across the same band ports ( X)

+/- 4

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4x7/16 DIN Female 2xAISG [1x i-RET 8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1209x343x89 (4x11x3)

Mounting

Pre-mounted heavy duty brackets [7456.00]

Weight, with brackets, kg (lbs)

17.0 (38.0)

Weight, without brackets, kg (lbs)

12.0 (26.0)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

546/66/636

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

70(156)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

PVC

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (56x16x8)

Shipping weight, kg (lbs)

20.6(45)

Brackets

7256.00, 7454.00A, 7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 28 2011 7:24PM

497

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P65-18-XXW2-M

POLARIZATION: XX-Pol
FREQUENCY (MHz): 2300-2690**
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 18.0/15.9
TILT: 0-10
LENGTH: 1.2m(48)

i-RET ANTENNA DVHBB65 1.2m


WXCM-2300-2690-65-18i/18i-Ai-D

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2300-2690**

Frequency band (MHz)

2300-2690

Gain (dBi/dBd)

18.0/15.9

Polarization

2 x Dual Linear 45

Nominal Impedance ()

50

VSWR

<1.5:1

Horizontal beam width, -3 dB ()

65

Vertical beam width, -3 dB ()

5.5

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

<18,16,15 @ 0,5,10

First null fill (dB)

>-24, typical >-18

Vertical beam squint ()

0.5

Front to back ratio (dB) 180 30 coplanar

>27

Front to back ratio (dB) 180 30 total power

>25

Cross polar discrimination (XPD) 0 (dB)

>15

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

n.a.

IM3, 2xTx&43dBm (dBc)

<-153

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4x7/16 DIN Female [No i-RET module attached]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1209x343x89 (4x11x3)

Mounting

Pre-mounted heavy duty brackets [7456.00]

Weight, with brackets, kg (lbs)

17.0 (38.0)

Weight, without brackets, kg (lbs)

12.0 (26.0)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

476 / 58 / 538

Maximum operational wind speed, m/s (mph)

42(93)

Survival wind speed, m/s (mph)

70(156)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430x400x200 (56x16x8)

Shipping weight, kg (lbs)

20.6(45)

Brackets

7256.00, 7454.00A, 7458.00A

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jun 29 2011 12:11AM

498

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P90-17-XXW2-R

POLARIZATION: XXPol
FREQUENCY (MHz): 2300-2690
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1 (Average)
TILT: 0-10
LENGTH: 1.2M (48)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2300-2690

Frequency band (MHz)

2300-2690

Gain (dBi/dBd)

16.1 (Average)

Polarization

2 x Dual linear 45

Nominal Impedance ()

50

VSWR

<1.5:1

Horizontal beam width, -3 dB ()

90 +/- 6

Vertical beam width, -3 dB ()

5.5

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

12 @ 0, 17 @ 5, 15 @ 10

First null fill (dB)

>-24,typical>-18

Vertical beam squint ()

<1.0 +/- .5

Front to back ratio (dB) 180 30 coplanar

>30 @ 180

Front to back ratio (dB) 180 30 total power

>25 @ +/-30 cone

Cross polar discrimination (XPD) 0 (dB)

>15

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

N/A

IM3, 2xTx&43dBm (dBc)

<-153

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female, 2 x AISG [1x8510.40]

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1219 x 343 x 100 (48 x 13.5 x 3.9)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (44)

Weight, without brackets, kg (lbs)

14.2 (32)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-30 to +70C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430 x 400 x 200 (48 x 13 x 8)

Shipping weight, kg (lbs)

20 (45)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data. **VSWR at 2300MHz is 1.55:1.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 22 2011 7:27AM

499

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

'XDO+LJK%URDGEDQG$QWHQQDV

POWERWAVE

P90-17-XXW2-M

POLARIZATION: XXPol
FREQUENCY (MHz): 2496-2690
HORIZONTAL BEAM WIDTH (): 90
GAIN (dBi dBd): 16.1 (Average)
TILT: 0-10
LENGTH: 1.2M (48)

Dual High Broadband Cross Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

2496-2690

Frequency band (MHz)

2496-2690

Gain (dBi/dBd)

16.1 (Average)

Polarization

2 x Dual linear 45

Nominal Impedance ()

50

VSWR

<1.5:1

Horizontal beam width, -3 dB ()

90 +/- 6

Vertical beam width, -3 dB ()

5.5

Electrical down tilt ()

0-10

Side lobe suppression, vertical 1st upper (dB)

12 @ 0, 17 @ 5, 15 @ 10

First null fill (dB)

>-24,typical>-18

Vertical beam squint ()

<1.0 +/- .5

Front to back ratio (dB) 180 30 coplanar

>30 @ 180

Front to back ratio (dB) 180 30 total power

>25 @ +/-30 cone

Cross polar discrimination (XPD) 0 (dB)

>15

Cross polar discrimination (XPD)60 (dB)

>10

Far field coupling

N/A

IM3, 2xTx&43dBm (dBc)

<-153

Power handling, average per input (W)

250

Power handling, average total (W)

1000

MECHANICAL SPECIFICATIONS*
Connector

4 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1219 x 343 x 100 (48 x 13.5 x 3.9)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

19.5 (44)

Weight, without brackets, kg (lbs)

14.2 (32)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

520

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC Grounded

Operating Temperature

-30 to +70C

Radome Material

ASA

Radome colour

Light Grey

Packing size, HxWxD, mm (ft)

1430 x 400 x 200 (48 x 13 x 8)

Shipping weight, kg (lbs)

20 (45)

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Sep 22 2011 7:25AM

500

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

iDiplexer Antennas

iDiplexer antennas combine the performance of


Powerwaves high performing multiband antenna line
and external diplexer into one product. iDiplexed
antennas offer a reduced amount of connectors and
feeder lines to customers who are limited in adding
additional feeders due to windload and space limitation
on towers. Customers can rapidly deploy an additional
overlay network by just exchanging the existing antennas
with iDiplexed antennas and reusing the existing feeders.
iDiplexed antennas usually combine the low band and
high band frequencies into a single pair of connectors,
still keeping the independent variable downtilt capability.

iDiplexer Antennas

POWERWAVE

iDiplexer Antennas

iDiplexer Antennas
Cross Polarized
Multi Broadband Cross Polarized Antennas

Horizontal
Beamwidth

Gain dBi dBd

65

17.3/15.2, 17.8/15.7

65

16.7/14.6, 17.4/15.3

65

15/12.9, 18/15.9

Tilt
Length
MET (with Integrated
2.6m (86)
Diplexer)
MET (with Integrated
2.0m (66)
Diplexer)
MET (with Integrated
1.4m (47)
Diplexer)

502

Part Number

Page

7755.0ST.0002.00

503

7752.0ST.0002.00

504

7750.0ST.0002.00

505

iDiplexer Antennas

POWERWAVE

7755.0ST.0002.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 17.3/15.2, 17.8/15.7
TILT: MET (with Integrated Diplexer)
LENGTH: 2.6m (86)

Dual Broadband Cross Polarized With


Integrated Diplexer

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

880-960

1710-1880

1850-1990

1900-2170

Gain (dBi/dBd)

16.6/14.5

17.3/15.2

17.3/15.2

17.6/15.5

17.8/15.7

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1:5:1

Horizontal beam width, -3 dB ()

71

67

65

65

62

Vertical beam width, -3 dB ()

7.4

7.0

6.9

6.4

6.1

>18,18,17,16,16@

>18,18,17,16,16@

>17,16,15,14,13@

>17,17,16,15,14@

>17,17,16,15,14@

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

2,4,6,8

30

30

30

30

30

Electrical down tilt ()

2 to 8

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0 to 8

38

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.5

<1

<3.5

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

0.5

0.5

0.5

0.5

0.5

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

>25

>25

16

14

16

16

16

Cross polar discrimination (XPD) 60 (dB)

>11

> 9.5

> 6.3

>7.2

>7.5

Far field coupling

<0.3

<0.41

<0.53

<0.58

<0.58

Cross polar discrimination (XPD) 0 (dB)

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-150

<-150

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2658x280x125mm (88x11x4)

Mounting

Pre-mounted heavy duty brackets

Weight, with brackets, kg (lbs)

25.1 (55)

Weight, without brackets, kg (lbs)

19.6 (43)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

880

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

55 (123)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

2800x355x255 (92x12x10)

Packing size, HxWxD, mm (ft)

Light Grey

Shipping weight, kg (lbs)

32.5 (71.6)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 2 2010 5:58AM

503

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iDiplexer Antennas

POWERWAVE

7752.0ST.0002.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 16.7/14.6, 17.4/15.3
TILT: MET (with Integrated Diplexer)
LENGTH: 2.0m (66)

Dual Broadband Cross Polarized With


Integrated Diplexer

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-896

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15.7/14.0

16.6/14.5

17.0/14.9

17.2/15.1

17.5/15.4

Polarization

Dual linear 45

Nominal Impedance ()
VSWR

Dual linear 45

50

50

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

71

67

63

63

60

Vertical beam width, -3 dB ()

9.6

8.9

6.2

>17,16,15,14 @

>17,16,15,14 @

>18,17,15,14 @

2,4,6,8

2,4,6,8

0,2,4,8

0,2,4,8

0,2,4,8

>30

>30

>30

>30

>30

Electrical down tilt ()

2-9

Side lobe suppression, vertical 1st upper (dB)


Isolation between inputs (dB)
Inter band Isolation (dB)

0-8

>18,17,15,14 @ 0,2,4,8 >18,17,15,14 @ 0,2,4,8

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.5

<1.5

<1.5

First null fill (dB)

>-25

>-25

>-25

>-25

>-25

Vertical beam squint ()

<1

<1

<1

<1

<1

Front to back ratio (dB) 180 30 copolar

>30

>30

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>25

>25

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>16

>15

>16

>16

>16

Cross polar discrimination (XPD) 60 (dB)

> 12

> 9.5

> 6.2

>6.5

> 7.5

<0.39

<0.5

<0.59

<0.59

Far field coupling

<0.26

IM3, 2xTx&43dBm (dBc)


IM7, 2xTx&43dBm (dBc)

<-153

<-153

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

2033x280x125mm (68x11x4)

Mounting

Pre-mounted heavy duty bracket

Weight, with brackets, kg (lbs)

19.8 (44)

Weight, without brackets, kg (lbs)

16.0 (35)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

653

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

70 (156)

Lightning protection

DC grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Grey (RAL 7035 on all visible plastic parts)

Packing size, HxWxD, mm (ft)

2175x355x255 (72x14x10)

Shipping weight, kg (lbs)

27 (59.5)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7256.00, 7454.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Dec 2 2010 5:53AM

504

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

iDiplexer Antennas

POWERWAVE

7750.0ST.0002.00

POLARIZATION: XX-Pol
FREQUENCY (MHz): 824-960, 1710-2170
HORIZONTAL BEAM WIDTH (): 65
GAIN (dBi dBd): 15/12.9, 18/15.9
TILT: MET (with Integrated Diplexer)
LENGTH: 1.4M

Dual Broadband Cross Polarized With


Integrated Diplexer

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-960

1710-2170

Frequency band (MHz)

824-880

880-960

1710-1880

1850-1990

1920-2170

Gain (dBi/dBd)

15/12.9

15/12.9

17.3/15.2

17.3/15.2

18/15.9

Polarization

Dual linear 45

Nominal Impedance ()
VSWR
Horizontal beam width, -3 dB ()

Dual linear 45

50

50

>1.5:1

>1.5:1

68 3

68 3

67 2

67 2

62 4

14

14

6.2

Vertical beam width, -3 dB ()


Electrical down tilt ()

2 - 12

Side lobe suppression, vertical 1st upper (dB)

0-8

>21,20,17,16 @

>21,20,17,16 @

>18,17,15,14 @

>18,17,15,14 @

>18,17,15,14 @

2,4,8,12

2,4,8,12

0,2,4,8

0,2,4,8

0,2,4,8

>30

>30

>30

>30

>30

Isolation between inputs (dB)


Inter band Isolation (dB)

40

Tracking, horizontal plane 60 (dB)

<1.0

<1.0

<1.5

<1.5

<1.5

First null fill (dB)

>20

>20

>20

>20

>20

<1

<1

<1

<1

<1

Front to back ratio (dB) 180 30 copolar

>26

>26

>30

>30

>30

Front to back ratio (dB) 180 30 total power

>26

>26

>25

>25

>25

Cross polar discrimination (XPD) 0 (dB)

>17

>17

>18

>18

>18

Cross polar discrimination (XPD) 60 (dB)

>11

>11

>10

>10

>10

Vertical beam squint ()

Far field coupling


IM3, 2xTx&43dBm (dBc)

<-153

<-153

IM7, 2xTx&43dBm (dBc)

NA

<-160

Power handling, average per input (W)

300

250

Power handling, average total (W)

600

500

MECHANICAL SPECIFICATIONS*
Connector

2 x 7/16 DIN Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

1408x280x125mm (49x11x5)

Mounting

Pre Mounted Heavy Duty Brackets

Weight, with brackets, kg (lbs)

18 (39.6)

Weight, without brackets, kg (lbs)

14.3 (31.5)

Wind load, frontal/lateral/rear side 42 m/s


Cd=1.6 (N)

435

Maximum operational wind speed, m/s (mph)

42 (93)

Survival wind speed, m/s (mph)

56 (123)

Lightning protection

DC Grounded

Operating Temperature

-40C to +60C

Radome Material

GRP

Radome colour

Grey (RAL 7035 on all visible plastic parts)

Packing size, HxWxD, mm (ft)

1550x355x255mm (61x14x10)

Shipping weight, kg (lbs)

23 (50.6)

RET

8210.40, 8210.10, 8220.40, 8220.10

Brackets

7456.00A, 7454.00, 7455.00, 7458.00

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Oct 21 2011 1:50AM

505

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Remote Electrical Tilt (RET)

The Powerwave RET system is designed to meet the


high requirements for reliability, flexibility and efficiency
in remote control of tower-mounted telecommunication
equipment. The system consists of a master control unit
(MCU) that controls the antenna line devices (ALDs) and
supplies DC power to them via a common bus. ALDs are
connected to the MCU using a separate ALD system cable
or by using the existing RF feeders in your system.

Remote Electrical Tilt

POWERWAVE

Remote Electrical Tilt (RET)

RET

Page

Single Band RET

508

Dual Band RET

517

Triple Band RET

520

iRET Antenna Controller Module

Page

iRET 8510

523

Master Control Units

Page

MCU

526

Current Injector Layer One Converter

Page

CILOC

533

RET System Cables

Page

RET System Cables

538

507

Remote Electrical Tilt

POWERWAVE

Single Band RET

Remote Electrical Tilt


Single Band RET

Start-up
Power Supply Surge

Current
Consumption(idle)

Part Number

Page

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8110.40

509

AISG V1.1 (V2.0/3GPP,


Ericsson configurable)

+10 to +30 V

<1mC

19V

8210.10

510

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8210.40

511

AISG1.1 (AISG
V2.0/3GPP, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8110.10

512

AISG V1.1 (V2.0/3GPP,


Ericsson configurable)

+10 to +30 V

<1mC

19V

8212.10

513

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8212.40

514

AISG V1.1 (V2.0/3GPP,


Ericsson configurable)

+10 to +30 V

<1mC

19V

8211.10

515

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8211.40

516

Standard

508

POWERWAVE

Remote Electrical Tilt

8110.40

Single Band RET

ELECTRICAL SPECIFICATIONS*
Product Number

8110.40

Standard

AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

62 x 78 x 216

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Rev1.0 / Oct 27 2009 Updated: Sep 21 2011 4:29AM

509

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8210.10

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling white


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8210.10

Standard

AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:35PM

510

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8210.40

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling white


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8210.40

Standard

AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:35PM

511

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Remote Electrical Tilt

8110.10

Single Band RET

ELECTRICAL SPECIFICATIONS*
Product Number

8110.10

Standard

AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

62 x 78 x 216

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Rev1.0 / Oct 27 2009 Updated: May 10 2010 11:34PM

512

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8212.10

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling blue


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8212.10

Standard

AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:36PM

513

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8212.40

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling blue


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8212.40

Standard

AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:36PM

514

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8211.10

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling red


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8211.10

Standard

AISG V1.1 (V2.0/3GPP, Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: May 10 2010 11:36PM

515

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8211.40

Remote Electrical Tilt

Single Band RET for Multiband Antennas (Controlling red


antenna array)

ELECTRICAL SPECIFICATIONS*
Product Number

8211.40

Standard

AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: May 10 2010 11:35PM

516

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

Dual Band RET

Remote Electrical Tilt


Dual Band RET

Start-up
Power Supply Surge

Current
Consumption(idle)

Part Number

Page

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8220.40

518

AISG v1.1

+10 to +30 V

<1mC

19V

8220.10

519

Standard

517

POWERWAVE

Remote Electrical Tilt

8220.40

Dual Band RET

ELECTRICAL SPECIFICATIONS*
Product Number

8220.40

Standard

AISG V2.0/3GPP (AISG1.1)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65 C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: Sep 21 2011 4:30AM

518

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Remote Electrical Tilt

8220.10

DualBand RET

ELECTRICAL SPECIFICATIONS*
Product Number

8220.10

Standard

AISG v1.1 (AISG V2.0/3GPP)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin ,19V, <250mA at Vin>19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin>19V

AISG Data Rate

9.6kbps

Rod positioning accuracy

<0.8mm

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevent provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500,000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: Aug 19 2010 7:32AM

519

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

Triple Band RET

Remote Electrical Tilt


Triple Band RET

Start-up
Power Supply Surge

Current
Consumption(idle)

Part Number

Page

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8230.40

521

AISG v1.1

+10 to +30 V

<1mC

19V

8230.10

522

Standard

520

POWERWAVE

Remote Electrical Tilt

8230.40

Triple Band RET

ELECTRICAL SPECIFICATIONS*
Product Number

8230.40

Standard

AISG V2.0/3GPP (AISG1.1)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65 C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system.

Updated: Sep 21 2011 4:31AM

521

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Remote Electrical Tilt

8230.10

Triple Band RET

ELECTRICAL SPECIFICATIONS*
Product Number

8230.10

Standard

AISG v1.1 (AISG V2.0/3GPP)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

< +/- 0.8mm

Operating Temperature

-40 to +65 C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

1 kg

Dimensions (W, L, H)(mm)

125 x 213 x 62 (excluding


mounting screws)

Connector Protection Ground

M6 screw

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your s

Updated: Aug 19 2010 7:34AM

522

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

iRET Antenna Controller Module

Remote Electrical Tilt


iRET Antenna Controller Module 8510

Start-up
Power Supply Surge

Current
Consumption(idle)

Part Number

Page

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8510.10

524

AISG V2.0/3GPP
(AISG1.1, Ericsson
configurable)

+10 to +30 V

<1mC

19V

8510.40

525

Standard

523

POWERWAVE

8510.10

Remote Electrical Tilt

iRET ANTENNA CONTROLLER MODULE

ELECTRICAL SPECIFICATIONS*
Product Number

8510.10

Standard

AISG1.1 (AISG V2.0/3GPP , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

NA

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

0.33 kg

Dimensions (W, L, H)(mm)

125 x 65 x 26 (excluding
connectors)

Connector Protection Ground

Grounded Via Antenna

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system

Updated: May 30 2010 11:59PM

524

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

8510.40

Remote Electrical Tilt

iRET ANTENNA CONTROLLER MODULE

ELECTRICAL SPECIFICATIONS*
Product Number

8510.40

Standard

AISG V2.0/3GPP (AISG1.1 , Ericsson configurable)

Power Supply

+10 to +30 V

Start up surge

<1mC

Current Consumption during tilting

<400mA at Vin <19V, <250 mA at Vin >19V

Current Consumption idle

<100mA at Vin <19V, <50mA at Vin >19V

AISG Data Rate

9.6 kbps

Rod positioning accuracy

NA

Operating Temperature

-40 to +65C

Type Approvals

Conformity with the relevant provision(s) of the directives RTTE 99/5/EG and LVD 73/23/EEG

MTBF

>500.000 hrs.

MECHANICAL SPECIFICATIONS*
Weight

0.33 kg

Dimensions (W, L, H)(mm)

125 x 65 x 26 (excluding
connectors)

Connector Protection Ground

Grounded Via Antenna

Connector AISG

IEC 60130-9 (Ed 3.0)

Ingress protection

IP65

Environmental

ETSI 300 019

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

RET SYSTEM*

Powerwave RET system is designed to meet the high


requirements for reliability, flexibility and efficiency in
remote control of tower-mounted telecommunication
equipment.
This system consists of a Master Control Unit (MCU)
that controls the Antenna Line Devices (ALDs) and
supplies DC power to them via a common bus, ALDs
are connected to the MCU using a separate ALD
system cable or by using the existing RF feeders in
your system

Updated: May 31 2010 9:27AM

525

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

Master Control Unit

Remote Electrical Tilt


Master Control Units

Type

Current Consumption

Power Supply

Part Number

Page

Master Control Unit

115/230 VAC 1.7 / 1.0A

AC

7070.10 (AC)

527

Master Control Unit

24V / <5.0A

24V

7070.30 (24 V)

528

Master Control Unit

48V / <2.5A

-48V

7070.50 (-48V)

529

Layer One Converter


Master Control Unit

115/230 VAC 1.7 / 1.0A

AC

7072.10 (AC)

530

Layer One Converter


Master Control Unit

24V / <5.0A

24V

7072.30 (24 V)

531

Layer One Converter


Master Control Unit

48V / <2.5A

-48V

7072.50 (-48V)

532

526

POWERWAVE

Master Control Unit

7070.10 (AC)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

AC

AC / Current consumption

115/230 VAC 1.7 / 1.0A

ALD supply voltage

+24 V DC

Max current draw per connector

2.7 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

IEC 60130-9 (Ed. 3.0)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: Nov 8 2011 5:19PM

527

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Master Control Unit

7070.30 (24 V)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

24V

DC / Current consumption

24V / <5.0A

ALD supply voltage

+24 V DC

Max current draw per connector

2.7 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

IEC 60130-9 (Ed. 3.0)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: Nov 8 2011 5:20PM

528

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Master Control Unit

7070.50 (-48V)

Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

-48V

DC / Current consumption

48V / <2.5A

ALD supply voltage

+24 V DC

Max current draw per connector

2.7 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

IEC 60130-9 (Ed. 3.0)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08237 Rev A Updated: Nov 8 2011 5:20PM

529

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7072.10 (AC)

Layer One Converter Master Control Unit

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

AC

AC / Current consumption

115/230 VAC 1.7 / 1.0A

ALD supply voltage

+24 V DC

Max current draw per connector

2.7 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

SMA (female)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: Nov 8 2011 5:20PM

530

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7072.30 (24 V)

Layer One Converter Master Control Unit

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

24V

DC / Current consumption

24V / <5.0A

ALD supply voltage

+24 V DC

Max current draw per connector

1.16 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

SMA (female)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: Nov 8 2011 5:21PM

531

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7072.50 (-48V)

Layer One Converter Master Control Unit

Layer One Converter Master Control Unit

ELECTRICAL SPECIFICATIONS
Power Supply

-48V

DC / Current consumption

48V / <2.5A

ALD supply voltage

+24 V DC

Max current draw per connector

1.16 A

Total current draw all connectors

3.48 A

Surge at start up all connectors

54 mC during <10 ms

LOCAL ALARM PORTS (IN port)


Output voltage at open

5 1 V

Output current at closed

5 2mA

LOCAL CONTROL PORTS


(Out ports, 3-pole relays)
Max input Voltage

30 V DC

Max input current

0.5 A

AISG data rate

9.6 kbps, 38.4 kbps

Weight

< 2.5 kg

Dimensions

Width 19 rack, Height 44mm, Depth 207mm

ENVIRONMENTAL SPECIFICATIONS
DC power supply

CAP 2 Circuit universal MATE-N-LOK 350778-1

AC power supply

IEC/EB60320-1 Male

RET 1 to 3

SMA (female)

Site LAN

4-pole RJ45 MDI

Local (Ethernet port)

4-pole RJ45 MDI

RS-232

9-pin d-SUB male

Local Alarm

Connector panel

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG.

MTBF

>250.000 hrs

Operating Temperature

-5C to 60C

Environmental

ETSI 300 019 * Weather-protected locations*

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

D031-08238 Rev A Updated: Nov 8 2011 5:21PM

532

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

Current Injector Layer One Converter

Remote Electrical Tilt


Current Injector Layer One Converter

Frequency Range (MHz)


806-960 MHz and 1710-2180
MHz
806-960 MHz and 1710-2180
MHz
698-960 MHz and 1710-2180
MHz
698-960 MHz and 1710-2180
MHz

Insertion Loss Return Loss Return Loss


(dB)
(dB) ANT Port (dB) BTS Port Part Number

Page

<0.2 dB

>20 dB

>20 dB

7060.00 (ANT)

534

<0.2 dB

>20 dB

>20 dB

7060.10 (BTS)

535

<0.2 dB

>20 dB

>20 dB

7060.05 (ANT)

536

<0.2 dB

>20 dB

>20 dB

7060.15 (BTS)

537

533

POWERWAVE

Current Injector Layer One Converter

7060.00 (ANT)

Current Injector Layer One Converter

ELECTRICAL DATA
Range (MHz)

806-960 MHz and 1710-2180 MHz

Frequency Range

806-960 MHz and 1710-2180 MHz

Insertion Loss (dB)

<0.2 dB

Return Loss (dB) ANT Port

>20 dB

Return Loss (dB) BTS Port

>20 dB

Passive Intermodulation 2X43 dBm

<-116 dBm

Power Handling (dBm)

Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Power Supply

+9 to +31 V

Current Consumption

< 50 mA

Current Handling

1.3A

AISG Data Rate

9.6 kbps, 38.4 kbps

Up-Link (MHz)

1850-1910

Down-Link (MHz)

1930-1990

Power Consumption

N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

<48 x 92 x 80

Weight (kg)

<750 g

RF Connectors

DIN 7/16 female/ male

AISG Output

IEC 60130-9 E (Ed 3.0)

Protection Ground

M8 screw

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection IP65

N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)

-40 to +65 C

MTBF

> 500,000 hrs

Ingress Protection

IP65

APPROVALS AND TESTS


Environmental

ETSI 300 019

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev A Updated: Apr 5 2010 12:09PM

534

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.10 (BTS)

Current Injector Layer One Converter

ELECTRICAL DATA
Range (MHz)

806-960 MHz and 1710-2180 MHz

Frequency Range

806-960 MHz and 1710-2180 MHz

Insertion Loss (dB)

<0.2 dB

Return Loss (dB) ANT Port

>20 dB

Return Loss (dB) BTS Port

>20 dB

Passive Intermodulation 2X43 dBm

<-116 dBm

Power Handling (dBm)

Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Power Supply

+9 to +31 V

Current Consumption

< 50 mA

Current Handling

1.3A

AISG Data Rate

9.6 kbps, 38.4 kbps

Up-Link (MHz)

1850-1910

Down-Link (MHz)

1930-1990

Power Consumption

N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

<48 x 92 x 80

Weight (kg)

<750 g

RF Connectors

DIN 7/16 female/ male

AISG Output

IEC 60130-9 E (Ed 3.0)

Protection Ground

M8 screw

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection IP65

N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)

-40 to +65 C

MTBF

> 500,000 hrs

Ingress Protection

IP65

APPROVALS AND TESTS


Environmental

ETSI 300 019

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev A Updated: Apr 5 2010 12:09PM

535

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.05 (ANT)

Current Injector Layer One Converter

ELECTRICAL DATA
Range (MHz)

698-960 MHz and 1710-2180 MHz

Frequency Range

698-960 MHz and 1710-2180 MHz

Insertion Loss (dB)

<0.2 dB

Return Loss (dB) ANT Port

>20 dB

Return Loss (dB) BTS Port

>20 dB

Passive Intermodulation 2X43 dBm

<-116 dBm

Power Handling (dBm)

Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Power Supply

+9 to +31 V

Current Consumption

< 50 mA

Current Handling

1.3A

AISG Data Rate

9.6 kbps, 38.4 kbps

Up-Link (MHz)
Down-Link (MHz)
Power Consumption

N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

<48 x 92 x 80

Weight (kg)

<750 g

RF Connectors

7/16 Male/BTS, Female/ANT side

AISG Output

IEC 60130-9 E (Ed 3.0)

Protection Ground

M8 screw

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection IP65

N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)

-40 to +65 C

MTBF

> 500,000 hrs

Ingress Protection

IP65

APPROVALS AND TESTS


Environmental

ETSI 300 019

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev B Updated: Apr 5 2010 12:09PM

536

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Current Injector Layer One Converter

7060.15 (BTS)

Current Injector Layer One Converter

ELECTRICAL DATA
Range (MHz)

698-960 MHz and 1710-2180 MHz

Frequency Range

698-960 MHz and 1710-2180 MHz

Insertion Loss (dB)

<0.2 dB

Return Loss (dB) ANT Port

>20 dB

Return Loss (dB) BTS Port

>20 dB

Passive Intermodulation 2X43 dBm

<-116 dBm

Power Handling (dBm)

Average (RMS) 55 dBm, Peak (pulse duration <0.1 ms) 68 dBm

Power Supply

+9 to +31 V

Current Consumption

< 50 mA

Current Handling

1.3A

AISG Data Rate

9.6 kbps, 38.4 kbps

Up-Link (MHz)
Down-Link (MHz)
Power Consumption

N/A

MECHANICAL SPECIFICATIONS
Dimension HxWxD mm(ft)

<48 x 92 x 80

Weight (kg)

<750 g

RF Connectors

7/16 Female/BTS, Male/ANT side

AISG Output

IEC 60130-9 E (Ed 3.0)

Protection Ground

M8 screw

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection IP65

N/A

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature (C)

-40 to +65 C

MTBF

> 500,000 hrs

Ingress Protection

IP65

APPROVALS AND TESTS


Environmental

ETSI 300 019

Type Approvals

Conformity with the relevant provision (s) of the directive RTTE 99/5/EG and LVD 73/23/EEG

D031-08236 Rev B Updated: Apr 5 2010 12:09PM

537

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Remote Electrical Tilt

POWERWAVE

RET System Cables

Remote Electrical Tilt


RET System Cables

Continuous
Current DC
Ports

Continuous AISG
Output Input

Operation
Temperature
Range

3.5 A

IEC 60130-9 (Ed. 3.0) -40 to +65C

3.5 A

IEC 60130-9 (Ed. 3.0) -40 to +65C

538

Part
Number

Page

2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)

7085.XX

539

2x 0.25mm2 (388
mil2) + 3x 0.75mm2
(1162 mil2)

7095.XX

540

Conductor Area

POWERWAVE

Remote Electrical Tilt

7085.XX

RET System Cables

SPECIFICATIONS*
Product Number

7085.XX

Continuous Current DC Ports

3.5 A

Connectors AISG Output Input

IEC 60130-9 (Ed. 3.0)

Operation Temperature Range

-40 to +65

Conductor Area

2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection

IP67 mated

Environmental

ETSI 300 019

Color

Black

7085.05

RET short cable 0.5m

7085.15

RET short cable 1.5m

7085.30

RET short cable 3.0m

7085.50

RET short cable 5.0m

8-Pin
Connector

ooPPPP Updated: Apr 5 2010 12:00PM

539

Pin 1

+12 V

+12 V

Pin 2

Not connected

Not connected

Pin 3

RS-485B

RS-485B

Pin 4

Not connected

Not connected

Pin 5

RS-485A

RS-485A

Pin 6

+24 V

+24 V

Pin 7

DC return

DC return

Pin 8

Not connected

Not connected

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

Remote Electrical Tilt

7095.XX

RET Systems Cable

SPECIFICATIONS*
Product Number

7095.XX

Continuous Current DC Ports

3.5 A

Connectors AISG Output Input

IEC 60130-9 (Ed. 3.0)

Operation Temperature Range

-40 to +65C

Conductor Area

2x 0.25mm2 (388 mil2) + 3x 0.75mm2 (1162 mil2)

Type Approvals

Conformity with the relevant provision(s)of the directives RTTE 99/5/EG and LVD 73/23/EEG

Ingress Protection

IP67 mated

Environmental

ETSI 300 019

Color

Black

7095.10

RET long cable 10m

7095.20

RET long cable 20m

7095.30

RET long cable 30m

7095.40

RET long cable 40m

7095.50

RET long cable 50m

7095.60

RET long cable 60m

7095.70

RET long cable 70m

7095.80

RET long cable 80m

7095.90

RET long cable 90m

7095.110

RET long cable 110m

8-Pin
Connector

Updated: Apr 5 2010 12:00PM

540

Pin 1

+12 V

+12 V

Pin 2

Not connected

Not connected

Pin 3

RS-485B

RS-485B

Pin 4

Not connected

Not connected

Pin 5

RS-485A

RS-485A

Pin 6

+24 V

+24 V

Pin 7

DC return

DC return

Pin 8

Not connected

Not connected

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Indoor Antennas

The indoor antenna is designed to blend into a wall or


ceiling inside a building and is the base antenna for
the Powerwave distributed antenna system. The indoor
antenna covers all bands from 800 MHz up to 2700 MHz
and supports multiband operation. Easy-to-install dual
band antennas from Powerwave are deployed in numerous
wireless networks worldwide. Using fewer antennas of
discreetly functional design beats using numerous antennas
of unsightly size and appearance especially with todays
aesthetic concerns.

Indoor Antennas

POWERWAVE

Indoor Antennas

Indoor Dual Band Antennas


Cross Polarized

Page

Indoor Dual Band Cross Polarized Antennas, 824-896/850-990 MHz

543

Indoor Multiband Antennas


Vertical Polarized

Page

Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

542

545

Dual Band Indoor Antennas

POWERWAVE

Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Dual Band Indoor Antennas


Cross Polarized
Indoor Dual Band Cross Polarized Antennas, 824-896/1850-1990 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

70

9/6.9, 9/6.9

216mm (8.5)

7999.00

544

543

POWERWAVE

7999.00

Dual Band Indoor Antennas


POLARIZATION: X-Pol
FREQUENCY (MHz): 800/1900
HORIZONTAL BEAM WIDTH (): 70
GAIN (dBi dBd): 9/6.9, 9/6.9
TILT: 0
LENGTH: 216mm (8.5)

Indoor/Outdoor Dual Band Cross


Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

800/1900

Frequency band (MHz)

806-896

Gain (dBi/dBd)

1850-1990

9/6.9

Polarization

9/6.9
Dual linear slanted

Nominal Impedance ()

50

VSWR

1.5:1

1.5:1

Horizontal beam width, -3 dB ()

72

56

Vertical beam width, -3 dB ()

70

60

Electrical down tilt ()

Front to back ratio (dB) 180 30 copolar

16

28

Cross polar discrimination (XPD) 0 (dB)

20

15

Cross polar discrimination (XPD) 60 (dB)

IM3, 2xTx&43dBm (dBc)

4
<-141

Power handling, average total (W)

50

MECHANICAL SPECIFICATIONS*
Connector

2 x N Female

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

216x216x73.7 (8.5x8.5x2.9)

Mounting

Weight kg (lbs)

0.73 (1.6)

Operating Temperature
Radome Material

Radome colour

RAL 7035, Light grey

Package size, HxWxD, mm (ft)

Shipping weight, kg (lbs)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08182 Rev A Updated: Apr 9 2010 11:07AM

544

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Multiband Indoor Antennas

POWERWAVE

Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Multiband Indoor Antennas


Cross Polarized
Indoor Multiband Vertical Polarized Antennas, 800-2500 MHz

Horizontal
Beamwidth

Gain dBi dBd

Tilt

Length

Part Number

Page

60/90

6/3.9, 9/6.9

0.210m (8")

7336.10

546

360

3/0.9

0.185m (7)

7336.00

547

360

3/0.9

0.165m (6.5)

P360-3-VCHW2-0

548

545

POWERWAVE

7336.10

Multiband Indoor Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 800-2500
HORIZONTAL BEAM WIDTH (): 60/90
GAIN (dBi dBd): 6/3.9, 9/6.9
TILT: 0
LENGTH: 0.210m (8)

Indoor Multiband Panel Vertical


Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

800-2500

Frequency band (MHz)


Gain (dBi/dBd)

806-896

870-960

1700-1900

1900-2500

6.5/4.4

6.5/4.4

9.5/7.4

10/7.9

Polarization

Vertical

Nominal Impedance ()

50

VSWR

<1.9:1

<1.5:1

<1.9:1

<1.8:1

Horizontal beam width, -3 dB ()

95

85

65

60

Vertical beam width, -3 dB ()

85

80

40

40

12

17

Electrical down tilt ()

Front to back ratio (dB) 180 30 copolar

16

15

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

50

MECHANICAL SPECIFICATIONS*
Connector

1 x N Female

Connector position

30cm Pigtail cable

Dimensions, HxWxD, mm(ft)

210 x 180 x 42 (8x7x2)

Mounting

Weight kg (lbs)

1.0 (2.2)

Operating Temperature
Radome Material

ASA

Radome colour

White

Package size, HxWxD, mm (ft)

240x280x45 (9x11x2)

Shipping weight, kg (lbs)

1.2 (2.6)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08159 Rev A Updated: Dec 20 2010 12:36PM

546

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7336.00

Multiband Indoor Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 800-2500
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 3/0.9
TILT: 0
LENGTH: 0.185m ( 7)

Indoor Multiband Vertical Polarized

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

800-2500

Frequency band (MHz)


Gain (dBi/dBd)

806-896

870-960

1700-1900

1900-2500

3/0.9

3/0.9

3/0.9

3/0.9

Polarization

Vertical

Nominal Impedance ()

50

VSWR

1.5:1

1.5:1

1.5:1

1.5:1

Beam width: Ceiling Mounted ()

360

360

360

360

Beam width: Wall Mounted ()

70

70

70

70

IM3, 2xTx&43dBm (dBc)

<-150

Power handling, average total (W)

50

MECHANICAL SPECIFICATIONS*
Connector

1 x N Female

Connector position

Back

Dimensions, HxWxD, mm(ft)

185 x65 (7 x 2.5)

Mounting

Weight kg (lbs)

0.2 (0.44)

Operating Temperature
Radome Material

ABS

Radome colour

White

Package size, HxWxD, mm (ft)

210x200x115 (8x8x5)

Shipping weight, kg (lbs)

0.36 (0.8)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

D031-08158 Rev A Updated: Apr 9 2010 11:06AM

547

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

P360-3-VCHW2-0

Multiband Indoor Antennas


POLARIZATION: V-Pol
FREQUENCY (MHz): 824-2700
HORIZONTAL BEAM WIDTH (): 360
GAIN (dBi dBd): 3/0.9
TILT: 0
LENGTH: 0.165m (6.5)

824-960/1710-2700MHz 360 Ceiling


Mount Indoor Omni Antenna

ELECTRICAL SPECIFICATIONS*
Frequency range (MHz)

824-2700

Frequency band (MHz)

824-896

870-960

1700-2170

2300-2700

3/0.9

3/0.9

3/0.9

3/0.9

Gain (dBi/dBd)
Polarization

Vertical

Nominal Impedance ()

50

VSWR

<1.5:1

<1.5:1

<1.5:1

<1.5:1

Horizontal beam width, -3 dB ()

360

360

360

360

Vertical beam width, -3 dB ()

60

58

55

50

n.a.

n.a.

Electrical down tilt ()

Front to back ratio (dB) 180 30 copolar

n.a.

n.a.

IM3, 2xTx&43dBm (dBc)

<-140

Power handling, average total (W)

50

MECHANICAL SPECIFICATIONS*
Connector

1N-Female With Cable Rg141 of 300mm length

Connector position

Bottom

Dimensions, HxWxD, mm(ft)

95x165

Mounting

Integrated Ceiling mount

Weight kg (lbs)

0.35 (1)

Operating Temperature

-40C to +60C

Radome Material

ABS

Radome colour

White

Package size, HxWxD, mm (ft)

180x180x150

Shipping weight, kg (lbs)

0.8 (1.8)

*All specifications subject to change without notice. Please contact your Powerwave representative for complete performance data.

ANTENNA PATTERNS*
For detailed patterns visit http://www.powerwave.com/rpa/.

Updated: Jan 20 2011 4:21AM

548

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Power wave

Clean Site Solutions

Powerwaves Clean Site solutions minimize the visual


impact of a complete antenna system and significantly
reduce investment and operational costs for network
operators when building new or upgrading existing
networks.
Building permits for existing antenna installations can be
used when replacing old, passive antennas with the Clean
Site solution. This simplifies the site acquisition process
significantly and shortens roll-out time considerably.
All Clean Site antennas support remote electrical tilt for
optimization of the coverage footprint and tuning of network
performance. By integrating all functionality into one single
unit, Clean Site offers you a flexible and attractive solution
in the most cost-effective way.

Clean Site Solutions

POWERWAVE

Clean Site Solutions: Overview

The Powerwave Clean Site program integrates a full range of multiband solutions to make the most of
tower space. High-volume production in several countries ensures rapid delivery.
Our products provide design and installation flexibility that meet a variety of needs, such as enabling
co-siting of networks and systems and dealing with space and zoning issues limiting the appearance
and location of new installations.
Single System
The baseline for the Clean Site single system is our single band broadband antenna portfolio with
cross polar diversity for either low band or high band.
Our low band antenna covers the full frequency range from 806-960 MHz while the high band
antenna covers 1710- 2170 MHz. Customize your Clean Site single unit by combining a low band
antenna with a remote electrical tilt (RET) Unit or a high band antenna with a tower mounted
amplifier (TMA) for either an 1800, 1900 or 2100 frequency band and RET Unit. No matter the
combination, your customized Clean Site single system is contained in one single housing enclosure.
Dual System
The Clean Site dual solution's basic configuration stems from the Powerwave dual band low
band/high band antennas. Combine the dual band antenna with remote electrical tilt (RET) units,
tower mounted amplifiers (TMA) and diplex filters to suit your network requirements. As with all
Clean Site units, all of the necessary components are contained in one discrete enclosure.
Triple System
The Powerwave Clean Site triple solution is the most advanced antenna system within the Clean Site
program. The Clean Site triple solution is based on the high performance triple band antenna
platform and is the superior solution for co-siting. An old installed passive antenna can be replaced
by a Clean Site triple system with remote electrical tilt (RET) Control and two dual TMAs and two
triplexers without changing the visual impact.
IntelliMast
As a part of the Powerwave Clean Site program, the IntelliMast offers a flexible way of integrating
multi-sector solutions in a pole configuration under one single radome. IntelliMast-CS, supporting the
full broad band antenna range, is the mounting solution to use when more than one sector is covered
from a single location. If a crane free installation is required, the super light weight Intellimast-PL is
the solution to use, supporting the 1.4m (4 feet) multiband antennas. The IntelliMast solution offers
maximum sector coverage with minimum visual impact.

550

Power wave

Mounting Solutions

All Powerwave antennas are delivered with mounting


brackets pre-mounted. The intent is to reduce logistic
and tower crew installation costs for our customers. All
brackets have a high quality surface treatment to maintain
the Powerwave standard for product exposure to severe
environments. By using steel in the sheet metal parts of
the tilt brackets, a robust and rigid design is ensured.

551

Mounting Solutions

POWERWAVE

Mounting Solutions

Heavy Duty Tilt Bracket


Part Numbers

Page

7256.00

553

Tilt Bracket
Part Numbers

Page

7456.00A

554

Triple Mount Bracket


Part Numbers

Page

7454.00A

555

Flush Wall/Pole Hose Clamp


Part Numbers

Page

7455.00

556

Large Pole Mounting Adapter


Part Numbers

Page

7458.00A

557

552

POWERWAVE

7256.00

Mounting Solutions
ANTENNALENGTH: 1.5meter/5feet
WEIGHT: 5.5 kg/ 12.1 lbs

Heavy Duty Tilt Bracket Kit

CROSS REFERENCE TABLE


Family

Part Number

LBB65

747x.xx, 747x.xxA, 547x.xx, 746x.0ST.xxxx.xx

LBB90

748x.xx, 748x.xxA, 548x.xx

DHBB

776x.xx, 776x.xxA, 576x.xx, 876x.0ST.xxxx.xx, 8722.0ST.xxxx.xx, P65-18-XXW2-x, P90-17-XXW2-x

DBB65

775x.xx, 775x.xxA, 5475x.xx, 875x.0ST.xxxx.xx, P65-18-XHW2-xx

DBB90

777x.xx

TBB65

778x.xx, 778x.xxA, 578x.xx, 878x.0ST.xxxx.xx, P65-1x-XDHW2-N(D1)

ALP

7804.00, 7824.00, 7834.00, 7838.00

City

7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx

Urban

7218.1x

Xurban

7227.1x

AL Antennas

7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x

5 Series

547x.xx, 548x.xx, 576x.xx, 575x.xx, 578x.xx, 5722.xx

MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D

See Drawings

Weight

5.5 kg/ 12.1 lbs

Material

Galvanized steel

Packing size, H x W x D

Call for info

Shipping weight

5.9 kg/ 13 lbs

Tilt range

See diagram

Pole dimension

25.4-114.3 mm (1-4.5)

Panning range

NA

Accessory products

Triple Mount Bracket 7454.00

All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration: IEC 60068-2-64
Sinus Vibration: IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt

Updated: May 20 2011 8:07AM

553

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7456.00A

Mounting Solutions
ANTENNA LENGTH: <1.5 meter/ 5 feet
WEIGHT: 3.6 kg/7.9 lbs

Tilt Bracket Kit

CROSS REFERENCE TABLE


Family

Part Number

LBB65

NA

LBB90

NA

DHBB

NA

DBB65

NA

DBB90

NA

TBB65

NA

ALP

770x.xx(A), 7720.xx(A), 7721x.xx(A), 7735.xx(A), 7740.xx(A), 8720.0ST.xxxx.xx, 8721.0ST.xxxx.xx

City

P65-18-XW2-x, P90-17-XW2-x, P65-18-CH-N, P65-21-XH-0

Urban

7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x

Xurban

7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

AL Antennas

7337.0x, 7338.0x, 7339.0x

5 Series

570x.xx, 5720.xx, 5721.xx 5735.xx, 5740.xx

MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D

See Drawings

Weight

3.6 kg/7.9 lbs

Material

Galvanized steel, stainless screws & nuts

Packing size, H x W x D

Call for info

Shipping weight

4.0 kg/ 8.8 lbs

Tilt range

See diagram

Pole dimension

25-115 mm

Panning range

NA

Accessory products

Big Pole Clamp, 7458.00A/ Flush wall,


pole clamp 7455.00 and Triple Mount
Bracket 7454.00

All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration: IEC 60068-2-64
Sinus Vibration: IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt

D031-08419 Rev. A Updated: May 20 2011 7:59AM

554

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7454.00A

Mounting Solutions

Triple Mount Bracket

ANTENNALENGTH: 1.5meter/5feet
WEIGHT: 1.5 kg/3.3 lbs

The Powerwave Triple Mount Bracket allows the mounting of three antennas on a single support for a sturdy and elegant installation. The Triple Mount Bracket
permits independent mechanical and electrical tilting of each sector, offering unparalleled versat
CROSS REFERENCE TABLE
Family

Part Number

LBB65

747x.xx

LBB90

748x.xx

DHBB

776x.xx

DBB65

775x.x0

DBB90

777x.x0

TBB65

778x.x0

ALP

7804.00, 7824.00, 7834.00, 7838.00

City

7143.xx.xx.xx, 7144.xx.xx.xx, 7145.xx.xx.xx

Urban

7218.1x, 7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x,
7273.0x, 7275.0x, 7276.0x, 7277.0x, 7278.0x

Xurban

7227.1x, 7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

AL Antennas

7337.0x, 7338.0x, 7339.0x, 7840.x0, 7850.x0, 7329.0x, 7330.0x, 7331.0x, 7332.0x, 7333.0x, 7334.0x

5 Series

747x.xx, 748x.xx, 570x.0x, 572x.x, 5735.x0, 5740.x0, 5745.x0, 776x.xx, 775x.x0, 777x.x0, 778x.x0

MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D

See Drawings

Weight

6.8 kg/15 lbs

Material

Steel

Packing size, H x W x D

Call for info

Shipping weight

Call for info

Tilt range

See diagram, Only antennas <1.5 m/ 5


feet

Pole dimension

75-114 mm

Panning range

Call for info

Accessory products

Can be used with antenna tilt brackets


7456.00A and 7256.00

All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration: NA
Sinus Vibration: NA
Salt Mist: NA
D031-08417 Rev. A Updated: Apr 5 2010 11:58AM

555

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7455.00

Mounting Solutions

Flush Wall/Pole Hose Clamp

ANTENNA LENGTH: <1.5 meter/ 5 feet


WEIGHT: 0.4/0.9 lbs

Powerwave hose clamp is to be used with Powerwave antennas shorter than 1.5 meter/5 feet. Only one kit per antenna.
CROSS REFERENCE TABLE
Family

Part Number

LBB65

NA

LBB90

NA

DHBB

NA

DBB65

NA

DBB90

NA

TBB65

NA

ALP

NA

City

NA

Urban

7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x

Xurban

7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

AL Antennas

7337.0x, 7338.0x, 7339.0x

5 Series

570x.xx, 572x.xx, 735.x0A, 5740.x0A, 5745.x0A

MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D

See Drawings

Weight

0.4 kg/ 0.9 lbs

Material

Galvanized steel, stainless screws & nuts

Packing size, H x W x D

200 x 200 x 20 (mm)

Shipping weight

0.4 kg/ 0.9 lbs

Tilt range

NA

Pole dimension

40-100 mm/ 1.57-3.9

Panning range

NA

Accessory products

To be used with antenna tilt brackets


7456.00A

All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration: IEC 60068-2-64
Sinus Vibration: IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt

D031-08418 Rev. A Updated: Apr 5 2010 11:58AM

556

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

POWERWAVE

7458.00A

Mounting Solutions

Large Pole Mounting Adapter

ANTENNA LENGTH: <1.5 meter/ 5 feet


WEIGHT: 9.5 kg/ 20.9 lbs

Powerwave large pole mounting adapter is to be used with Powerwave antennas shorter than 1.5 meter/5 feet, see table below. Only one kit per antenna.
CROSS REFERENCE TABLE
Family

Part Number

LBB65

NA

LBB90

NA

DHBB

NA

DBB65

NA

DBB90

NA

TBB65

NA

ALP

NA

City

NA

Urban

7225.0x, 7226.0x, 7227.0x, 7228.0x, 7230.0x, 7231.0x, 7232.0x, 7233.0x, 7270.0x, 7271.0x, 7272.0x, 7273.0x,
7275.0x, 7276.0x, 7277.0x, 7278.0x

Xurban

7216.0x, 7217.0x, 7218.0x, 7255.0x, 7263.0x, 7281.0x, 7282.0x

AL Antennas

7337.0x, 7338.0x, 7339.0x

5 Series

NA

MECHANICAL DRAWINGS

TILT ANGLE GRAPH

MECHANICAL SPECIFICATIONS
Dimensions, H x W x D

See Drawings

Weight

9.5 kg/ 20.9 lbs

Material

Galvanized steel, stainless screws & nuts

Packing size, H x W x D

200 x 200 x 20 (mm)

Shipping weight

10 kg/22 lbs

Tilt range

NA

Pole dimension

Max 215/ mm 78.5

Panning range

NA

Accessory products

To be used with antenna tilt brackets


7456.00A

All brackets fulfill the requirements stated in the standards to follow. Antennas
are tested together with their corresponding brackets.
Random Vibration: IEC 60068-2-64
Sinus Vibration: IEC 60028-2-6
Salt Mist: IEC 68-2-11, test Ka, 35 C, 48h, 5% salt

D031-08520 Rev. A Updated: Apr 5 2010 11:57AM

557

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

Antenna FAQ

POWERWAVE

Antenna FAQ

Q:

Are your indoor antennas broadband (7336.00, 7336.10)?

A:

Yes, these antennas work from 806 MHz through 2.5 GHz, providing an effective solution for
multiple technologies such as iDEN, CDMA, GSM, UMTS, WiFi to name a few.

Q:

Why do you specify different gain for the same antenna in your data sheet?

A:

The gain is dependent on the frequency used. The stacking distance of the elements is changed
relative to the frequency. This means that the gain will increase with a higher frequency.
Powerwave always tries to give you the best information possible, and therefore we specify the gain
at common used frequency to help you implement the antennas easily in your network.

Q:

Why do you use different materials in your radomes?

A:

Mechanical structure of antennas are designed in different ways. Powerwave uses either the
reflector as the structure, or the radome in a combination with the reflector. When using the reflector
as the base for the mechanical structure, the radome is only used for weather protection, and
therefore we use a light plastic radome (ASA/GRP). When increasing the size of an antenna there
is no benefit to use the reflector as the mechanical structure as it would increase the overall weight
of the product. Therefore, when building larger sized antennas, Powerwave utilizes a combination of
reflector and radome as the mechanical structure. Normally, a glass fibre radome is used in the
latter instances. Thus, the mechanical structures of the Powerwave antennas are designed to
minimize product weight while maintaining a robust and reliable solution.

Q:

Why do you have different gain on your triple band antennas?

A:

Powerwave designs triple band antennas by using one low band antenna throughout the whole
length, while you have the two upper band antennas on top of each other. This means that the high
band antenna at the upper part of the antenna needs more internal cabling compared to the high
band antenna at the lower part. This extra internal cabling introduces some more losses, and the
result is that the gain of the upper high band antenna is slightly lower.

Q:

How do I get antenna patterns?

A:

The antenna patterns are available at our webpage, please visit:


www.powerwave.com/antennapatterns.asp. On this page you are able to download our antenna
patterns for many different planning tools. Please contact us if you need assistance.

Q:

You are mentioning broadband antennas - how do you define that?

A:

When Powerwave is stating broadband antennas, we are indicating that these can be used for more
than one system. We usually state low broadband, meaning that the antennas can be used for
systems operating from 806 to 960 MHz. High band usually means that the antennas can be used
for systems from 1710 to 2170. Some antennas may differ from this. The reason why we design
and produce broadband antennas is to achieve logistical benefits for our global customer base,
allowing for deployments in all markets worldwide.

558

Power wave

Network Management

Powerwaves NetWay Solution Suite maximizes return


on investment of wireless infrastructure by enabling
network discovery, diagnosis and resolution from a
centralized software interface in combination with networkaware hardware. NetWay gives you all the tools for fault,
configuration, performance and security management.
Centrally monitor and manage critical network resources,
and adjust cell coverage during peak and off-peak hours,
saving time, money and reducing the carbon footprint
through fewer truck rolls.

POWERWAVE

NWV-001

NetWay Vision Software Solution

NetWay Vision Management Module

The NetWay Vision software product is an Element Management System (EMS), developed and supported by Powerwave Technologies. The NetWay Vision product
provides service providers with centralized monitoring and management capabilities for advanced wireless systems, supplied by Powerwave Technologies.
GENERAL SPECIFICATIONS
NetWay Vision Licensing

Software license based on number of managed network elements and number of con-current PC client
users

NetWay Server Requirements

Rack mounted or standalone Intel Based Server equipped with, Ethernet 100/1000 Base-T Network
Interface, Windows Server OS 2003/2008

User PC Client Requirements

Intel Based PC equipped with Color Monitor, Ethernet 10/100/1000 Base-T Network Interface, Windows XP,
Internet Explorer 6/7

Standard Warranty

Updates and fixes for one full year, after installation of NetWay Vision is completed

Extended Warranty

Yearly Software Upgrades and Yearly Updates are available and can be separately purchased

Documentation

User Guide: D044-05258, Administrator Guide: D044-05313

Commercialize

Current Release NetWay Vision

Updated: Aug 4 2011 2:27PM

560

Copyright 2011 Powerwave Technologies, Inc. All rights reserved.


All specifications are subject to change without notice. Please contact your Powerwave
representative for complete performance data.

PartPart
Number
Index
Number
Index Part N

POWERWAVE

Part Number
010-11177-0214
010-11182-02nn
010-11183-02nn
010-11198-0002
010-50025-0232
24501, 24511
25001, 25011
25002, 25012
25014, 25016
25101, 25111
25102, 25112
25103, 25113
4168.11.33.00
4168.11.33.02
4168.11.33.03
4168.11.33.06
4168.11.33.52
4168.21.33.00
4168.21.33.03
5472.00
5473.00
5477.00
5478.00
5478.06
5483.00
5488.00
5701.00
5701.02
5701.06
5721.00
5721.02
5722.00
5740.00
5760.00
5760.02
7070.10 (AC)
7070.30 (24 V)
7070.50 (-48V)
7072.10 (AC)
7072.30 (24 V)
7072.50 (-48V)
7085.XX
7095.XX
7216.03
7217.03
7217.04
7217.11
7218.03
7218.04
7218.05
7218.09
7218.13
7218.14

Part Number Index

Page
40
41
42
85
43
39
44
45
46
47
48
49
409
410
411
412
413
407
408
308
309
310
311
312
338
339
276
277
278
279
280
281
300
303
304
527
528
529
530
531
532
539
540
387
391
390
389
397
398
402
403
399
400

Part Number
7218.15
7218.19
7225.04
7226.03
7226.04
7227.04
7227.14
7228.03
7228.04
7228.06
7228.08
7230.04
7231.04
7231.06
7232.04
7232.07
7233.04
7233.06
7233.08
7255.03
7255.04
7256.00
7263.01
7263.04
7270.02
7271.02
7271.03
7272.02
7273.02
7273.03
7281.02
7281.04
7282.03
7332.00B
7332.02B
7332.06B
7333.00B
7333.02B
7333.06B
7334.00B
7334.02B
7334.06B
7336.00
7336.10
7390.00B
7454.00A
7455.00
7456.00A
7458.00A
7472.00
7472.00A
7473.00
7473.00A

Page
404
405
416
417
418
423
422
425
426
427
428
430
431
432
433
434
435
436
437
394
401
553
392
393
415
419
420
424
429
421
395
396
388
446
443
444
441
440
442
447
445
448
547
546
385
555
556
554
557
319
320
325
326

561

Part Number
7476.00
7476.02
7476.06
7477.00
7477.02
7477.06
7478.00
7478.00A
7478.02
7478.06
7481.00
7482.00
7483.00
7483.00A
7486.00
7486.02
7486.06
7487.00
7487.02
7487.06
7488.00
7488.00A
7488.02
7488.06
7700.00
7700.06
7701.00
7701.00A
7701.02
7701.02A
7701.06
7720.00
7721.00
7721.00A
7721.02
7721.02A
7721.06
7721.10
7721.40
7722.00
7722.00A
7735.00A
7740.00A
7745.00A
7750.00
7750.00A
7750.OST.0002.00
7752.00
7752.00A
7752.OST.0002.00
7755.00
7755.00A
7755.OST.0002.00

Page
313
314
315
316
317
321
318
324
322
323
340
329
333
334
341
342
327
328
336
337
330
332
331
335
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
301
302
362
363
505
364
365
504
366
367
503

PartPart
Number
Index
Number
Index Part N

POWERWAVE

Part Number
7760.00
7760.00A
7760.02
7760.03
7760.06
7760.40
7762.00
7765.00
7766.00
7780.00
7780.00A
7782.00
7782.00A
7785.00
7785.00A
7840.00
7850.00B
7999.00
8110.10
8110.40
8210.10
8210.40
8211.10
8211.40
8212.10
8212.40
8220.10
8220.40
8230.10
8230.40
8510.10
8510.40
8720.0ST.B400.00
8721.0ST.0000.00
8721.0ST.B400.00
8722.0ST.0000.00
8722.0ST.B400.00
8760.0ST.0000.00
8760.0ST.B100.00
8760.0ST.B400.00
8780.0ST.0000.00
8780.0ST.B100.00
8780.0ST.B100.04
8780.0ST.B400.00
8780.0ST.B400.02
8780.0ST.B400.04
8782.0ST.0000.00
8782.0ST.B100.00
8782.0ST.B100.02
8782.0ST.B100.04
8782.0ST.B400.00
8782.0ST.B400.02
8782.0ST.B400.04

Part Number Index

Page
353
354
352
355
356
357
359
358
360
369
370
371
372
373
374
439
449
544
512
509
510
511
515
516
513
514
519
518
522
521
524
525
484
487
485
488
486
492
490
491
464
465
466
467
468
469
470
471
472
473
474
475
476

Part Number
8785.0ST.0000.00
8785.0ST.B100.00
8785.0ST.B100.04
8785.0ST.B400.00
8785.0ST.B400.02
8785.0ST.B400.04
ALR0062/00109
ALR1200/00209
ALR1200/90209
ALR1212/00209
ALR2200/00209
ALR2200/90209
ALR2212/00119
ALR2212/00129
ALR2212/92202
ALR2222/00109
ALR3200/00109
ALR3200/01109
ALR3200/90109
ALR3200/91109
ALR3232/51109
ALR3242/03039
ALR3246/00309
ALR3246/010
ALR4200/00209
ALR4200/01109
ALR4200/01209
ALR4600/00109
ALR4600/00119
ALR4600/00209
ALR6200/00109
ALR6212/00102
ALR6212/90129
ALR6212/90139
ALT1200/00209
AM1200/05309
AR0027/50409
AR0065/00109
AR1200/05309
AR1200/95209
AR1700/80208
AR1700/80209
AR1700/80218
AR1700/80219
AR1700/80229
AR1700/80408
AR1700/80409
AR1700/80418
AR1700/80419
AR1700/80429
AR1700/90209
AR1700/90409
AR1700/90419

562

Page
477
478
479
480
481
482
141
143
142
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
171
110
111
172
173
112
113
114
115
116
117
118
119
120
121
122
123
124

Part Number
AR1717/90609
AR200/00
AR200/90109
AR2200/00109
AR2212/052
AR2212/05209
AR2700/50209
AR2700/50409
AR2727/50609
AR3400/01109
AR3400/91109
AR3434/51109
AR3700/50409
AR4200/01209
AR4600/05309
AR4640/05309
AR6500/00109
AR6512/00229
AR6512/00239
AR6517/01429
AR6517/01439
AR6517/01459
AR6522/01109
AR6560/00209
ATR1200/001xy (GSM 900)
ATR1200/002xy (GSM 900)
ATR1200/901xy (EGSM 900)
ATR1200/902xy (EGSM 900)
CEV-000-000-001
CM1000-AMPS-xxx
CM1001-EGSM-xxx
CM1002-DPBXBC
CM1007-DBPXBC-xxx
CM1015-DPBXBC-xxx
CW0-000-000-003
G3L-1829-120
G3L-1929-160
G3L-2129-140
G3L-850-160
G3l-850-180
G3L-929-135
LGP12101
LGP121nn
LGP138nn
LGP141nn
LGP145nn
LGP146nn
LGP174nn
LGP175nn
LGP18104
LGP18510, LGP18520
LGP18520, LGP18521
LGP185nn

Page
125
174
176
175
177
178
126
127
128
179
180
181
129
182
183
184
130
131
132
133
134
135
136
137
186
187
188
189
101
86
87
79
81
83
99
11
12
13
9
7
10
71
69
75
90
88
89
51
52
70
53
54
55

PartPart
Number
Index
Number
Index Part N

POWERWAVE

Part Number
LGP18611
LGP186nn
LGP192nn
LGP195nn
LGP213nn
LGP215nn
LGP219nn
LGP23302
LGP233nn
LNKA800
LNKA900
LNKC1800
LNKC1900
LNKF100
LNKF400
LNKF800
MF0-004-000-002
MF0-048-000-001
NP50B0-22111
NP5O-11111
NPBO-11111
NPBO-11311
OS-0851-P0-XXX
OS-0921-V0-XXX
OS-0933-E0-XXX
OS-0951-P0-XXX
OS-1821-H0-XXX
OS-1833-E0-XXX
OS-1851-H0-XXX
OS-1921-H0-XXX
OS-1933-E0-XXX
OS-1951-E0-XXX
OS-1991-H0-XXX
OS-2133-E0-XXX
OS-2151-E0-XXX
P360-3-VCHW2-0
P65-15-XD-N
P65-15-XDHW2-N
P65-15-XL-2
P65-15-XL-4
P65-15-XL-R
P65-15-XLH-RR
P65-16-XL-2
P65-16-XL-4
P65-16-XL-6
P65-16-XL-R
P65-16-XLH-RR
P65-17-XDHW2-N
P65-17-XL-2
P65-17-XL-4
P65-17-XL-R
P65-17-XLH-RR
P65-18-XDHW2-N

Part Number Index

Page
57
56
50
91
73
33
92
76
74
209
212
213
211
214
210
215
96
97
191
192
193
194
15
21
25
16
22
26
17
23
27
18
28
29
19
548
307
380
344
345
453
457
346
347
348
454
458
378
349
350
455
459
376

Part Number
P65-18-XHW2-MM
P65-18-XHW2-RR
P65-18-XXW2-M
P65-18-XXW2-R
P90-14-XLH-RR
P90-15-XLH-RR
P90-16-XLH-RR
P90-17-XXW2-M
P90-17-XXW2-R
RH004000/003
RH004002/001
RH100020/101
RH100020/211
RH200020/101
RH200020/211
RH201022/101
RH201022/211
RH300020/101
RH300020/211
RH304022/03A
RH304022/101
RH304022/211
RH305022/03A
RH308022/03A
RH309022/101
RH309022/211
RH330020/101
RH334022/101
RH400020/101
RH400020/211
RH500020/101
RH500020/211
RH600020/101
RH600020/211
RH601022/101
RH601022/211
RH602022/101
RH621010
RH700030/101
RH700030/101
RH705032/101
RH770020/101
RH777722/251
RH805022/101
RH805022/211
RH900020/101
RH900020/211
RH909022/251
RTM1GU-A2A1
RTM1GU-A2A1.J2J1
RTM1GU-A2A1.J2J1.L2L1
RTM1GU-A2A1.L2L1
RTM1GU-J2J1

563

Page
495
494
498
497
460
461
462
500
499
221
226
227
228
229
230
231
232
233
234
260
235
236
261
262
237
238
239
240
241
242
243
244
245
246
247
248
249
222
219
250
251
252
253
254
255
256
257
258
196
197
195
198
199

Part Number
RTM1GU-J2J1.L2L1
RTM1GU-L2L1
SB400-A
SB400-B
Tap-In
TS07-AWDB111-001
TS07-AWDB112-001
TSAW-07BP111-001
TT08-19DB111-001
TT19-08BP111-001
TT26-0000112-0n1
TT8D-0000112-0n1
TTAW-0000112-001
TTAW-07BP111-001
TTAW-60BW111-001
TU09-000001n-001
TU9E-28BW01n-00n
UA107 62/1
UA107 62/2
UA107 62/3
UA107 62/4
UA115 04
UA115 04/84, UA115 04/85
VersaFlex 7.0
VersaFlex 9.0

Page
200
201
204
205
217
62
63
58
64
65
35
37
60
59
61
66
67
267
268
269
270
207
265
103
104

Contact Us
Quality and Environmental
Management System
Certifications
ISO 9001

TickIT

TL 9000

ISO 14001

Sales by Region

Support by Region
Customer service offered 24 hours a day

U.S. & Canada


USSales@pwav.com
Latin America
SouthAmericaSales@pwav.com
Europe
EuropeSales@pwav.com
Middle East & Africa
MEASales@pwav.com
Asia-Pacific
APACSales@pwav.com

Customer Service
+1 888 PWR WAVE
(+1 888 797 9283)
Technical Support Americas
Support@pwav.com
+1 888 PWR WAVE ext. 3
(+1 888 797 9283)
Technical Support Asia-Pacific
TechSupportHK@pwav.com
Technical Support Europe
TechSupport@pwav.com
+46 8 540 822 00

About Powerwave Technologies


A global leader in end-to-end wireless coverage and capacity solutions, Powerwave Technologies, Inc. offers cutting
edge wireless infrastructure to address the demands of enterprise and commercial customers. Powerwave offers a
comprehensive suite of solutions, including Antennas, Base Station Solutions and Coverage Solutions. Powerwaves
product line supports all wireless network protocols and frequencies including Next Generation Networks in 4G LTE
technology. Powerwave solutions, products and services also help wireless operators and OEMs reduce capital and
operating expenses, speed rollout of services, improve coverage and capacity, and reduce environmental impact.

Worldwide Corporate Headquarters


1801 East St. Andrew Place
Santa Ana, CA 92705 USA
+1 714 466 1000
+1 714 466 5800 FAX

www.powerwave.com

Copyright 2012, Powerwave Technologies, Inc. All rights reserved. Powerwave, Powerwave Technologies, and the Powerwave logo are registered
trademarks of Powerwave Technologies, Inc. Clean Site, Connecting the Wireless World, Inside Out Solutions, Intellimast, InView Management System,
LinkNet, MicroFlex, NetOne, NetWay, NetworkOne, Nexus, Performance Boost, PowerBoost, RapidFlex, SubTerra, Tap-In and VersaFlex are trademarks of
Powerwave Technologies, Inc. LTE is a registered trademark of European Telecommunications Standards Institute. Other trademarks referenced are the
property of their respective owners. All specifications are subject to change without notice. Please contact your Powerwave representative for complete
performance data.
D031-08643 Rev. E 01/12

You might also like