Unzip and extract the files that you have downloaded to a specific folder.
Run Odin downloader.
Put a check mark on Auto reboot and Protect OPS. Click on OPS to browse and select the OPS file. You need to go the destination f older where you have extracted Bennett_v1.0 ops file. Put a check mark on One Package and browse and select the firmware file in the l ast box that is ONE PACKAGE. You will get the following message once firmware fi le is checked : Check MD5 FileName MD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar Open File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar Check MD5 Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E Image MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E Check MD5 ok Press Power and Q button simultaneously to enter in Download mode. Once you are in the Download mode, connect it to USB data cable and wait for ODI N to detect the phone. Once detected, the COM PORT 1 MAPPING box will become yel low and the phone s port will be detected. In the message section, you will get t he following message: Check MD5 FileName MD5 File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar Open File Name : B7510XXKPB_B7510XXKP3_B7510XXOXAKP4_HOME.tar Check MD5 Tail MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E Image MD5 : A5EE8DC87E670F99C1C5BA58ACC07E9E Check MD5 ok <1> Added!!! <1> Detected!!! Now click on start. Wait until the green bar in the first box reached to the end . It will reboot your Galaxy Pro twice or thrice. Once done, it will give a message as PASS in the COM PORT box as well as message section. Disconnect the phone from USB. Go to Settings > About Phone and check the Firmwa re Version. Restore the phone back to factory settings to wife off the data. To do it Go to Settings > Privacy settings > Factory Data reset. Once it restarts, shut it down again and insert SD card and SIM card and now you r Samsung Galaxy Pro is just like a brand new handset with android gingerbread. You can follow this article if you want to setup up phone for the first time.