Professional Documents
Culture Documents
Calipers & Height Gauges
Calipers & Height Gauges
Height Gauges
Exp # 1
OBJECTIVES
Calipers
Caliper Parts
Types of Calipers
Inside caliper
Outside caliper
Divider caliper
Odd leg caliper
Vernier Caliper
Digital Caliper
Dial Caliper
Depth caliper
Inside caliper
Outside caliper
Divider caliper
Vernier Caliper
Digital Caliper
Dial caliper
Depth caliper
Digital Caliper
Reading
5 mm + 0.11 mm = 5.11mm
HEIGHT GAUGES
TYPES OF HEIGHT
GAUGES
Procedure
Using veriner, and dial calipers, measure the dimensions of your part.
Check that the vernier caliper correctly reads zero when the jaws
are closed.
Close the jaws around the object but do not over tighten.
When both locking screws are tightened the caliper can be removed
from the object and read without worrying if the jaws will shift
position.
You can read the main scale .
Note the number of divisions on the Vernier plate from its zero mark
to a line which exactly coincides with a line on the fixed bar.
The same as veriner caliper except using dial indicator for reading
divisions rather than veriner scale.
Results