agian1s ‘Sound Sensor - Gesetech Wiki
Sound Sensor
From Geeetech Wiki
Contents
1 Overview
2 Applications
3 Connection Diagram
4 Examples
5 How to buy
Overview
‘The Sound sensor module is a simple microphone based on a opamp LM358 to amplify the sound
strength of the environment like door knocks and etc loud enough to be picked up by a microcontroller’s
Analog to Digital converter. The value of output can be adjusted by the potentiometer.
Applications
= Simple microphone
= Sound detection
Connection Diagram
Here is the guide illustrates how to connect an Arduino to the sound sensor, The following is a table
describing which pins on the Arduino should be connected to the pins on the sound sensor:
hitpakwww gooetech cam wiklindex prp'Saund Sensor 1292015 ‘Sound Sersor- Gesetech Wiki
Examples
void setup() :
‘Serial.begin(96@0); // open serial port, set the baud rate to 9620 bps
>
weld Loop()
int val;
val-analogkead(@); _//connect mic sensor to Analog @
Serial.printIn(val,DEC);//print the sound value to serial
delay(108);
How to buy
Click here to buy Sound sensor (http://www. geeetech.com/analog-voice-sound-sensor-module-p-
600.html)
Retrieved from "hitp://Avww.geeetech.com/wiki/index.php?title-Sound_Sensor&oldid~:
04"
= This page was last modified on 16 September 2012, at 20:54.
= This page has been accessed 2,312 times.
hitpakwww gooetech cam wiklindex prp'Saund Sensor 22