Professional Documents
Culture Documents
Initial Setup For WinsSCP For Windows
Initial Setup For WinsSCP For Windows
1. Open WinsSCP.Exe
3.
1. Host
: ftpetax.bri.co.id
2. Control Port : 40021
3. Data Port : 40021-40990
4. Mode
: Passive
5. encryption : SSL/TLS - Implicit Encryption
6. User Name : dealpos
7. Password : Z9Q2P9l5264RK0s
4. Click submenu FTP unde r Environment check Force IP Address for passive
mode connection
Note : if force ip address for passive mode connections be ignored, there will be a problem
directory listing like below
5. Check whether server response timeout been se to 60s to avoid failed file transfer under
category Connection.
7. To check if setting was correct, click login button and see if it is connected :