that it has like mission to eliminate the excess of heat accumulated in the moto
The different parts of the
cooling system are :
Fan:Generate an air draft than you
cool the water through the radiator.
Water cameras:The hollows come
from the block and butt, you get the water through which.
Water pump:She is the person in
charge to pump the water and to do her circular for the conduits
Muffs:They are drivers of gum that
join the engine block with the radiator and where the water circulates .
Thermostat:A control is of the
temperature of the motor to do the circular water for the radiator, or no, according to the temperature of the motor
Cover of the radiator:It is a little
valve that you leave to leave the water vapor to the exterior to attain a determined temperature, the fact that by means of a spring you open or you close the valve.
Radiators:The radiator is a deposit
fixed by plates where the water circulates . You have a stopper where you fill up, and two communications, one to send the water to him and other to receive it.
Refrigerants
Freezing point. You are supposed to be
inferior to any temperature that exists in the system, in order to avoid freezings in the evaporator.
Refrigerants but commonly used
Water Ammonia Glycol
Antifreeze
The antifreeze are fixed that they add
to the liquids to reduce his melting point, achieving in this way that the resulting mixture freeze to a lowermost temperature.