Professional Documents
Culture Documents
Hardware Configurations: User Interface Device Communicates Via The
Hardware Configurations: User Interface Device Communicates Via The
Hardware Configurations
Overview
The LTM R controller, either alone or connected to an LTM E expansion module, can be operated with
or without a user interface device.
In any configuration, the LTM R controller can be configured to perform monitoring, fault management,
motor protection and control functions.
All user interface devices require an independent power source.
Communications
User interface devices and their communications interfaces include:
User interface device
HMI port via the local RJ45 connector on the LTM R controller or
LTM E expansion module
HMI port via the local RJ45 connector on the LTM R controller or
LTM E expansion module
HMI port via the local RJ45 connector on the LTM R controller or
LTM E expansion module
Network PLC
NOTE: For any instructions about the LTM CU, see the TeSys T LTM CU Control Operator Unit Users
Manual.
1639501 03/2013
245