Professional Documents
Culture Documents
Bus bar A
Insulation
Bus Bar B
Insulation
Bus bar C
Notes:
1. The busbar connection shall be
rated at 800amps or higher.
2. The size and supports used in
this terminal box must be
referred to the panelboard
manufacturer.
3. The dimension of the terminal
bus must be sized correctly to
accommodate the following:
a. Incoming cables from the
existing wire gutter ( an
ocular inspection is
needed).
b. The outgoing cables of:
Existing cable going to
the existing MDP(ocular
inspection is needed)
New cables going to
MDP( for 2 x 3-100mm2)
4. The panelboard manufacturer
shall consider the actual
condition and the proposed
transition wireway for the new
MDP.
This side coming
from the Wire
Gutter