Professional Documents
Culture Documents
Wireless Communication MCQs
Wireless Communication MCQs
c) Both a and b
d) None of above
10) Dwell time is dependent on a number of factors
a) Propagation
b) Interference
c) Distance from BS
d) All of above
11) Unit of power is
a) dBM
b) dBW
c) dB
d) Both a and b
12) 30 is added to covert
a) dBW to dBM
b) dBm to dBW
c) W to dBM
d) dBW to W
13) Channel assignment (Frequency reuse)
a) Efficient utilization of radio spectrum
b) Increased capacity
c) Minimized interference
d) All of above
14) Types of Handover is
a) Soft handover
b) Hard handover
c) Both a and b
d) None of above
15) 2.5 gHz is the frequency of
a) Channel
b) Cell
c) Bluetooth
d) None of above
16) AMPS were publically introduced in:
a) 1973
b) 1978
c) 1983
d) 1987
4) The AMPS communication system based on FDMA analog was introduce in America in
which era?
a) 70s
b) 80s
c) 90s
d) 20s
5) In ____ the user spoke with a mobile operator, who actually dialed the call over the
PSTN.
a) MTS
b) MS
c) BS
d) LTA
6) III Gen, 00s, communication system base on
a) (FDMA), Analog.
b) (TDMA) Digital.
c) (CDMA), All Digital.
d) (CDMA), Analog.
7) ______ allows subscribers to operate in mobile phone service areas other than the service
area where the service is subscribed
a) Roaming
b) Grade of service
c) both
d) neither of above
8) _______ is a statistical concept which allows a large number of users to share relatively
small number of channels providing access on demand from a pool of available channels.
a) Trunking
b) Raoming
c) both
d) neither
9) _______ is a measure of the ability of a trunked system to give access to a user requiring
service during the busiest hour (4-6pm, Thu, Fri)
a) Grade of Service
b) roaming
c) trunking
d) all the above
10) _____ is called the frequency re-use factor in simple
a) 1/N
b) M
c) S
d) K
Wajahat
1. The type of access technology used in GSM technology is
a) FDMA/TDMA
b) CDMA
c) OFDMA
d) None of the above
b) Macrocell
c) Picocell
d) None of the above
7. Which cell can be used for most or dense populated area
a) Macro cells
b) Micro cells
c) Picocell
d) None of the above
8. The process of modulation ,channel coding,trans direction and reverse for reception are
carried out
a) BTS
b) BSC
c) MSC
d) MS
9. Q higher valve is achievable by
a) Big cluster size
b) Small cluster size
c) Medium cluster size
d) None of the above
10. The cell having same adjacent cluster cell with same channels are known as
a) Adjacent cell
b) Co channel cell
c) Macro cell
d) Selective cell
11. AMPS (Advanced Mobile Telephone System) was invented by which country
a) Scandinavia
b) UK
c) America
d) France
12. Which of the following are the cellular technologies
a) IS : 54 / Is-36 America
b) GSM Europe and Asia
c) IS-95 America
d) All of the above
13. Which technology access is used for narrow band radio system
a) FDMA/TDMA
b) FDMA
c) CDMA
d) ALL
14.
15. The communication between keyboard and computer , the transmission is known to be
a) Simplex
b) Half-duplex
c) Full-duplex
d) Automatic
16.
17.
18.
19.
20.
wahab
MCQ
1:In ..........the first public mobile telephone service was introduce in twenty five major
Americans cites
a:1946
b:1947
c:1998
d:1989
10:Measure the ability of a trunked system to give access to a user requring services the busiest
hour (4pm-6pm) is called...
a:GOS b:power control c: trunking d:none
12:For the first tier in hexogonal geometery carrier to interference ratio is.......
a:S/I=1?6(3N)^2 b:f=mg c:v=d/t d:1
14:In place of the 832 channels avalible in AMPS the NAMPS system offered .....channels
a:3456 b:500 c:2,496 d:200
15:Scalabilty=?
a:s=kn
b:5
c:6 d:7
18:...... geometry approximate omni direction base with free space propagation.
a:triangle b:circle c:hexagon d:square
d) Both of them
d) 4
d) 4
4. Bluetooth Frequency:
a) 1.4GHz
b) 2.4GHz
c) 3.4GHz
d) 4.4GHz
5. Types of Antenna:
a) 1
b) 2
c) 3
d) 4
c) Cluster
d) MSC
c) None of these
d) Both of them
d) 1952
d) 13
10. How many users were served by IMTS in New York in 1976?
a) 345
b) 445
c) 545
d) 645
c) 25KHz
c) 1986
d) 30KHz
d) 1989
13. Which system was provided by TIA (Telecom Industry Association) in 1988?
a) IS-54
b) IS-95
c) IS-72
d) None of
these
b) 1986
c) 1987
d) 1988
c) FDMA
d) WCDMA
d) 4
d) None of these
c) 3rd Generation
M ali
MCQS:
Q#1 DESCRIBE THE FUNCTION OF ELECTRICAL COMMUNICATIONSYSTEM
(ECS)?
A.
B.
C.
D.
SEND MESSAGES
INFORMATION
BOTH
NONE OF THESE
Q#2
WHAT KIND OF INFORMATION SOURCE EXIST IN SCS?
A.
B.
C.
D.
Q# 3
WHAT DOES OFTA STANDS FOR IN WIRELESS COMMUNICATION ?
A.
B.
C.
D.
B. COAXILE CABLE
C. BOTH
D. NONE OF THESE
Q#5
WHAT ARE THE EXAMPLES OF ANALOG COMMUNICATION ?
A.AMPLITUDE MODULATION (AM)
B.FREQUENCY MODULATION (FM)
C.BOTH
D.NONE OF THESE
Q#6
DESCRIBE THE FREQUENCY BAND OF A SATELLITE
COMMUNICATION FOR UPLINK AND DOWNLINK ?
A.6GHZ , 4GHZ
B.7GHZ , 5GHZ
C.ALL ABOVE
D.NONE OF THEM
Q#7
WHAT DOES MTSO STANDS FOR ?
A.MOBILE TELEPHONE SWTCHING OFFICE
B.MOBILE TELECOMUNICATION SYSTEM ONLINE
C.NONE OF THESE
D.ALL ABOVE
Q#8 WHICH GENERATION IS BEEN USED IN PAKISTAN ?
A.1ST GEN
B.2ND GEN
C.2.5 GEN
D.3RD GEN
A.C=MS
B.E=MC^2
C.BOTH
D.NONE OF THEM
Q#16 The time a call may be maintained within a cell,without handover, is called the??
A.HAND OFF
B.DWELL TIME
C.HANDOVER
D.NONE OF THESE
D.NONE
Q#20 WHICH SYESTEM PROVIDES A SOFTHANDOFF?
A.CDMA
B.GSM
C.BOTH
D.NONE OF THEM.
Shahbaz
a) 1876
b)1877
c)1878
d)1879
a) Limited
b) Unlimited
c) Normal
d) None of these
3. A mobile unit proceed from one cell to another during the course of call is called ____
a) Paging
b) Roaming
c) Handover
d) None of these
4. The interconnection of mobile radio transmitters and receivers with the PSTN in ____
a) 1945
b) 1946
c) 1947
d) 1948
a) FDMA
b)TDMA
c) CDMA
d) WCDMA
a) MSC
b) PSTN
c) Telephone
d) Both a & b
a) 8
b) 4
c) 10
d) 3
a) Q=d/r 4N
b) Q = d/r 3n
c) Q= d/r 5n
d) Q-d/r 6n
9. It can be shown that the no of hexagonal cells per cluster is given by ____
a) n= i^2+ij+j^2
b) n= i+ij+j
c) n= i^2+j^2
d) n= i+ij-j^2
10. The time a call may be maintained within a cell without handover is called ____
a) Dwell Time
b) MAHO Time
c) BAHO Time
d) None of these
a) FM cellular environment
b) AM cellular environment
c) MICRO cellular environment
d) None of these
a) Fixed
b) Dynamic
c) Both a & b
d) None of these
a) 6
b) 3
c) 10
d) 2
a) Mobile
b) Base Station
c) Both a & b
d) None of these
a) Mobile
b) Base Station
c) Both a & b
d) None of these
a) RSSI
b) DWELL TIME
c) SCATTERS
d) DIFFRACTOR
17. In a ____ handoff mobile station can communicate with two base stations at the same time.
a) Hard
b) Soft
c) Medium
d) None of these
a) 1
b) 3
c) 5
d) 7
a)
FDMA
b)
TDMA
c)
CDMA
d)
Both a & b
AMPS
b)
DMPS
c)
GSM
d)
None of these
Rubi javed
1.Alexandar Graham Bell invented telephone in .
a. 1876
b. 1854
c. 1916
d. 1910
Cordless telephone
Mobile telephone
Both a and b
None of these
Limited
Unlimited
Normal
None of the above
PSTN
IMTS
MTS
MSC
6.A mobile unit proceed from one cell to another during course of call is called
a.
b.
c.
d.
Paging
Roaming
Handover
None of these
7.In MTS the user spoke with a mobile operator who actually dialed the cal over the
..
a.
b.
c.
d.
BS
MSC
PSTN
IMTS
876
666
574
654
China
Tokyo
Chicago
Brazil
10.In place of 832 channels available in AMPS the NAMPS system offered
channels.
a.
b.
c.
d.
900
2496
2456
1200
N = i+j
N = i+ij+j2
N = i2+ij+j2
None of these
c. Both
d. None of these
13.Each cell has exactly .. equidistant neighbours.
a.
b.
c.
d.
5
4
3
6
BS
MS
Both
None of these
1db
4db
6db
5db
16.The time a call may be maintained within a cell without handover is called ..
a.
b.
c.
d.
Dwell time
MAHO time
BAHO time
None of these
1
3
5
7
c. 10
d. 3
19.In 1969 an additional channels were added in MHz band.
a.
b.
c.
d.
440-446
480-490
454-459
430-435
BTS
BS
MS
Operator
21.In a .. handoff mobile station can communicate with two base station
at the same time.
a.
b.
c.
d.
Hard
Soft
Medium
None of these
M nazeer
Abbas samin
Qs 1 RSSI stand for
(a) call signal strength indicator
(b) radio signal strength indicator
(c) roaming signal strength indicator
Qs 2 what is dwell time ?
(a) call maintain in a cell without handover
(b) call maintain in a cell with handover
(c) call maintain in a cell in all format
Qs 3 Call freq band is ?
(a)400 Mhz to 500 Mhz
(b)500 Mhz to 600 Mhz
(c) 800 Mhz to 900 Mhz
Qs 4 Macrocells is
(a) Coverage area is low
Qs 7 what is scalability?
(a) To multiply no of channel
(b) To add no of channel
(c) To divide no of channel
Qs 8 Frequency or ?
(a) radian
(b) watt
(c) Channel
Qs 9 set of cell is
(a) cluster
(b) channel
(c) frequency
Qs 10 Half Duplex is
(a) mobile
(b) phone
(c) walky taky
Qs 11 US standard has
(a) 1 generation
(b) 2 generation
(b) 3 generation
Qs 12 Control Channel has
(a) 1 types
(b) 2 types
(b) 3 types
Qs 20 MS stand for
(a) mobile station
(b) mobile sim
M arsalan
1. In mobile station and base station uplink have have second name?
A. Downlink
B. Forward Link
C. Reverse Link
D. None of the above
2. FDMA stands for
A. Free Division Multiple Access
B. Face division Multiple Access
C. Frequency Division Multiple Access
D. All of the above
3. TDMA stands for
A. Tree Division Multiple Access
B. Tower Division Multiple Access
C. Time Division Multiple Access
D. None of the above
4. Which one is not a Duplexing Tecnique?
A. Simplex
B. Half Duplex
C. Multiple Duplex
D. Full Duplex
5. Omni directional antenna is
A. Edge Excited
B. Mobile Station Excited
C. Base Station Excited
D. Centre Excited
6. Directional Antenna is
A. Centre Excited
B. Mobile Station Excited
C. Base Station Excited
D. Edge Excited
7. PSTN stands for
A. Post Switched Telephone Network
B. Private Switched Telephone Network
C. Public Switched Telephone Network
D. None of the above
8. GSM stands for
A. Generation System for Mobile
B. Game System for Mobile
C. Global System for Mobile
D. None of the above
9. I-Gen Mobile in 80s was
A. American Based
B. Europe Based
C. Germany Based
Moin mushtaq
21.
22.
Simplex
Half-duplex
Full-duplex
None of the above
23.
Ultra-violent
X-rays
Gamma Rays
None of the above
24.
Circle
Triangle
Hexagonal
All of the above
Pentagonal
Circular
Triangular
Hexagonal
Equally
Unequally
Halved
Quartered
29. Which one of the options below is an advantage of fixed channel assignment?
a)
b)
c)
d)
33. The process of modulation ,channel coding, trans direction and reverse for reception are
carried out
e)
f)
g)
h)
BTS
BSC
MSC
MS
34. AMPS (Advanced Mobile Telephone System) was invented by which country
e) Scandinavia
f) UK
g) America
h) France
35. If there are no free channels what error would the user receive?
a) Call will be dropped
b) low balance
c) network busy
d) none of the above
Unknown
MCQS
6-in mathematical model for communication channel additive noise channel produces.
digital demodulator (b)modulation (c) channel (d) SNR
7-example of a linear filter channel is
(a)wireline telephone channel (b) SNR (c) channel (d) physical channel
7- A message is sent to a paging subscriber via the paging system access number by a
telephone keypad or modem.
(a)wireline telephone channel (b) SNR (c) pagging (d) physical channel
8-singnals transmitted through by multiple radio stations not interfere
(a)transmitter (b) SNR (c) pagging (d) physical channel
9-convert the output of the source into the electrical signal is suitable for transmission.
(a)wireline telephone channel (b) SNR (c) pagging (d) physical channel
Kamil
N= i2+j2+i2j
N= i2+j2+ij
N= i2+j2+(ij)2
N= i2+j2+ij2
Downstep
Upstep
Downlink
Uplink
4.The space between Base station and Mobile station is known as CAI which stands for :
a)
b)
c)
d)
5. 2nd Generation (GSM) of cellular communication provides data transfer rate of:
a)
b)
c)
d)
D=R(3N)
D=N(3R)
D=R(3M)
D=R(3) N
1
2
3
7
Signals
Cells
Power
Frequency band.
Minimum
Maximum
No call blocking
None of the above
b) P is inversely proportional to d2
c) P is inversely proportional to d
d) P2 is direct proportional to d
13. GSM is
a)
b)
c)
d)
TDMA based
FDMA based
CDMA based
None of the above
Control channel
Voice channel
Costumer channel
Verified channel
K=SN
S=KN
N=SK
K2=S
a)
b)
c)
d)
3 dBW
30 dBW
3.3 dBW
300 dBW
Average users
Traffic intensity
No. of calls per unit time
Area of cell
19. If a caller is maintains his call within the cell without handover then that time is known as :
a)
b)
c)
d)
Caller time
Dwell time
Drag time
Handoff time
20. The angle which is used when making two co-channel interference cell:
a)
b)
c)
d)
45 degree
60 degree
90 degree
30 degree
Unknown
1) cordless sustem mobile provides ______ range?
a) Limited
b) unlimited
c) normal
d) non of these
2) In MTS the user spoke with a mobile operator who actullay dialed the over the ______.
a) BS
b) MSC
c) PTSN
d) non of these
4) The process of selecting and allocating channels groups for all base stations with a system is
known as ______.
a) frequency planning
b) frequency planning and reusing
c) frequency resuing
d) non of these.
N= j2+ i j2 +i
a) positive integer
b) non positive integer
c) non negatice integer
d) non of these.
14) The GSM network is divided into three major systems ______.
a) SS,BSS,OSS
b) BTS,BS,MSC
c) CELL,BTS,BS
d) non of these
15) In a ______ handoff a mobile station only communicate with base station?
a) Hard
b) Soft
c) Medium
d) Non of these
17) In a ______ handoff mobile station can communicate with two base stations at the same
time.
a) hard
b) soft
c) medium
d) non of these
answers
1)a
2)c
3)c
4)b
5)d
6)a
7)c
8)a
9)c
10)c
11)a
12)c
13)c
14)a
15)a
16b
17)b
18)a
19)d
20)a
Tayyab
1.
3
4
15. MAHO stands for
Mobile assisted handover
Modern assisted handover
Main assisted handover
16. BAHO stands for
Base assisted handover
Bare assisted handover
Banned assisted handover
17. The handover in which only base station is changed is called
Soft handover
Hard handover
18. The handover in which base station and also frequency is changed is called
Soft handover
Hard handover
19. How many type of antenas are
2
3
4
20. Ist generation 80s ETACS (FDMA) ,analogue is an
Americans standards
Europeans standard
Asif Khalid
b)
c) log( ) d) 10ln( )
c) 6
d) 5
19) =
a) (3N)
b) (3N)
c) (4N)
d) (4N)
Afzaish afzal
1. _______ refers to a user who has access to the same or similar telecommunication
services at different places.
a. Device portability.
b. User mobility.
c. Infotainment.
d. Location dependent.
Answer: B.
2. The wireless application protocol started at the same time as _________ in Japan.
a. h-node.
b. i-mode.
c. r-mode.
d. j-mode.
Answer: B.
3. The layer involved in the correction of transmission errors is
a. data link.
b. network layer.
c. physical layer.
d. transport layer.
Answer: D.
4. The layer responsible for routing of packets is ________
a. data link.
b. network layer.
c. physical layer.
d. transport layer.
Answer: B.
5. End-to-end connection is established by _____________.
a. Data link.
b. Network Layer.
c. Physical layer.
d. Transport Layer.
Answer: D.
6. Transparent bearer services only use the functions of the _______ layer to transmit data.
a. Data link.
b. Network Layer.
c. Physical layer.
d. Transport Layer.
Answer: C.
7. Initially Short messaging service (SMS) offered ______ characters.
a. 150.
b. 160.
c. 170.
d. 180.
Answer: B.
8. EMS (Enhanced Message Service) offers a message size of _______ characters.
a. 460.
b. 560.
c. 660.
d. 760.
Answer: D.
9. A GSM system consists of _____________ subsystems.
a. 2.
b. 3.
c. 4.
d. 5.
Answer: B.
10. The primary need of a GSM system is______________.
a. SIM.
b. PIN.
c.PUK.
d. IMSI.
Answer: A.
11. In DAB , the channel that carries all user data is __________
a. FIC.
b. MSC.
c. FIB.
d. VLR.
Answer: B.
12. The ________ mode transfers data in addressable blocks.
a. packet
b. synchronized
c. stream
d. Information
Answer: A.
13. The header size in DAB is _________ bytes.
a. 2.
b. 4.
c. 7.
d. 8.
Answer: C.
14. ______ lists the services of a provider and contain additional information for set-up
boxes.
a. EIT.
b. NIT.
c. SDT.
d. TDT.
Answer: B.
15. A __________ can occur if an object has changed by two users working with two copies.
a. conflict.
b. duplicate.
c. reintegration.
d. consistency.
Answer: A.
16. ________ RPC allows non-blocking RPCs even when a host is disconnected.
a. Double.
b. Reloadable.
c. Queued.
d. Two-phase.
Answer: C.
17. _________ refers to the movement of communication devices.
a. Device portability.
b. User mobility.
c. Infotainment.
d. Location dependent.
Answer: A.
18. __________ configuration describes a desktop in an office.
a. Fixed and wired.
b. Mobile and wired.
c. Fixed and wireless.
d. Mobile and wireless.
Answer: A.
19. The layer responsible for converting bits into signal is ________ layer.
a. physical.
b. datalink.
c. network.
d. transport.
Answer: A.
20. Cells are combined into _______.
a. sectors.
b. clusters.
c. regions.
d. impulse.
Answer: B.
M ali minhas
1. Which one is the part of channel assignment?
Ultra Channel assignment
Dynamic Channel assignment
Mixed Channel assignment
Extreme Channel assignment
Ans: Dynamic Channel assignment
3. What is cluster?
Group of items
Group of things
Group of capacitors
Group of cells
Ans: Group of cells
6. What is RSSI?
Radio signal smart integration
Radio smart system indicator
Radio signal strength integration
Radio signal strength indicator
8. What is shadowing?
Direct signal
Undirect signal
Signal strength
Signal range
Ans: Undirect signal
**************
M. irfan
Fill in the blanks :
1. communication system using radio waves to connect portable handset to a dedicated
fixed port (base station) which is connected to.as a normal telephone line
2. The most popular frequency band for satellite communications is.. for the uplink
and for the downlink.
3. The geographic area served by ais broken up into smaller geographic areas.
4. .acts as an intelligent central office switch that keeps track of the movement of the
mobile subscriber.
5. The system faced a high demand for a very limited channel resource.
6.AMPS was based on 666 paired voice channels,spaced every...in the .region.
7. The CDMA system offered . Totimes the capacity of existing AMPS cellular
techniques.
8. The process of selecting and allocating channel groups for all base stations within a system
is known as.
9. Channel assignment can be..and
10. The time a call may be maintained within a cell, without handover, is called the .
11. does not mean changing the channel but rather deciding which base station will
handle the connection.
12. For hexagonal geometry, co-channel reuse ratio Q is.
13. Pr(dBm) =
14. .. is a measure of the ability of a trunked system to give access to a user requiring
service during the busiest hour.
15. Au - Traffic intensity Au =
Awais shah
PART(B): MCQs
1, In AMPS, a ____GHz channel is provided to the users. ( 10, 20, 30, 40) ANS: 30
2, Up link is also known as_______. (Reverse, Forward, MS, BS link) ANS: Reverse Link
3, ______ link have 4 GHz frequency. (Uplink, downlink, MSC, BS Link) ANS: Downlink
4, A Full Duplex have ___ channels. (1,2,3,4) ANS: 2
5, Radio waves are confined to__________ areas known as cel. (satellite, spherical, hexagonal,
square) ANS: hexagonal
6, 11 channels did _______ provide in 152-158 MHz band. (MSC, IMTS, ATS, MTS)
ANS: IMTS
7, _____ was based on full duplex channel. (ATS, MTS, IMTS, TS) ANS: IMTS
8, WCDMA and CDMA are the examples of______ generation cellular phone network. (First,
Second, Third, Fourth) ANS: Third
9, A ______ is a physical medium that is used to Receive a signal. (Transducer, Channel,
Transmitter, Receiver) ANS: Receiver
10, Filter is used for removing _______. (Power, frequency, Noise) ANS: Noise
11, Cell have _______ shape. (Square, Hexagonal, Rectangular, spherical) ANS: Hexagonal
12, The speed of 2.5 generation mobile system have _______ Kbps. (10, 44-164, 384-2M, 55)
ANS: 44-164
13, The first generation mobile is in ______ . (70s, 80s, 90s, 2000) ANS: 80s
14, The second generation mobile is in ______ . (70s, 80s, 90s, 2000) ANS: 90s
15, Cluster have _____ cells. (3, 5, 4, 7) ANS: 7
16, ________ is the type of Division Duplexing . (CDMA, TDMA, FDMA, FDD) ANS: FDD
17, ________ is still used in USA. (CDMA, TDMA, FDMA, FDD) ANS: CDMA
18, Television is an example of______ duplex channel. (Half, Full, Simplex, None) ANS: Simplex
19, Blue tooth have ______ frequency. (Low, High,2.4 GHz, No) ANS: 2.4 GHz
20, In Under communication ______ frequency is used. (Low, High, Zero, No) ANS:
Low
Moazzam shabir
1. The worlds first cellular system was developed in 1979 by which country?
a.
b.
c.
d.
United States
England
Japan
China
TDMA
CDMA
OFDMA
None of the above
4. The coverage and capacity of CDMA system is more than that of GSM system
a.
b.
c.
d.
True
False
Equal
None of the above
Microcell
Macrocell
Picocell
Nanocell
Macro cells
Micro cells
Picocell
Umbrella cells
9. The cell having the same number in the adjacent cluster using the same set of frequency
channels are termed as
a. Adjacent cell
b. Co channel cell
c. Copy cell
d. Duplicate Cell
AMPS
NAMPS
GSM
none of the above
11. Which of these is a second-generation TDMA based cellular phone system used in
Europe
a. AMPS
b. NAMPS
c. GSM
d. none of the above
12. Which of these is a second-generation CDMA based cellular phone system used in North
America
a. GSM
b. D-AMPS
c. IS-95
d. none of the above
13. The __________ cellular phone system will provide high speed internet access and media
access along with voice
a. first-generation
b. second-generation
c. third-generation
d. none of the above
AMPS
CDMA
NAMPS
both (a) and (c)
800-MHz
900-MHz
1800-MHz
none of the above
FDMA
TDMA
CDMA
none of the above
1
3
5
7
FDMA
TDMA
CDMA
both (a) and (b)
FDMA
CDMA
TDMA
none of the above
824-894 MHz
900-MHz
1.8-2.0 Ghz
either (a) or (c)
a.
b.
c.
d.
value of, N the reuse factor ( where D = distance between two co-channel cells
and R= radius of a co-channel cell)
7
5
12
19
25. The Erlang B formula can be used to calculate any one of the
a.
b.
c.
d.
d. 10000 W
20 dBm
10 dBm
40 dBm
30 dBm
log 25
10 X log 25
-25
log 10 25
11.60 dBw
41.76 dBw
11.60 dBm
11.76 dBw
29.9526 W
19.9526 W
39.9526 W
49.9526 W
Ammar
1.
2.
3.
4.
5.
6.
7.
8.
9.
11. When the distance of a mobile phone increases from BS, power is consumed_______.
(less, more, average, none)
12. MTS in the US started in______. (1900, 1920, 1946, 1950)
13. MTS has a frequency of__ or___ GHz. (35-150, 100-200, 400-500, 500-900)
14. A simplex has ___ channels. (1,2,3,4)
15. Example of Simplex is_______. (TV, mobile, printer, mouse)
16. Example of Half Duplex is_____. (TV, radio, walkie talkie, pager)
17. Example of Full duplex channel is_______. (TV, pager, mobile, none)
18. IMTS was based on_______ channel. (simplex, wireless, half duplex, full duplex)
19. In NAMPS, a ____GHz cannel is divided into 3 channels of 10 GHz. ( 10, 20, 30, 40)
20. CDMA is still used in________. (UK, USA, Germany, Italy).
Adnan anwar
Multiple Choice Questions(MCQs)
1.
2.
3.
4.
Graham Bell
Alexander Graham Bell
Elisha Gray
All of above
In which year Alexander Graham Bell introduced his brand new patient.
a)
1874
b)
1875
c)
1876
d)
1877
LMA Stands For
a) Last Mile Access
b) Lost Mile Access
c) Least Mile Acess
d) None Of These
CT Stands For
a) Communication Telephone
b) City Telephone
c) Cordless Telephone
5.
6.
7.
8.
9.
10.
11.
12.
d) None Of These
Which is most popular frequency band for satellite communications for
Uplink
a) 6GHz
b) 8GHz
c) 10GHz
d) 12Ghz
Which Generation of Satellite use 14/12GHz band
a) First Generation
b) Second Generation
c) Third Generation
d) Fourth Generation
Cellular telephones are personally
a) Portable devices
b) Non Portable Devices
c) Communication Devices
d) None of these
Cellular radio system is broken up into smaller geographic areas are called
a) Cells
b) Sells
c) Structure
d) All of above
MTSO Stands for
a) Mobile telephone source office
b) Mobile telephone sharing office
c) Mobile telephone switching office
d) None of these
The MTS system employed frequencies in
a) 35Mhz or 150Mhz
b) 37MHz or 150Mhz
c) 39Mhz or 150Mhz
d) All of above
In which year additional 12 channels were added in the454-459-MHz band.
a) 1966
b) 1967
c) 1968
d) 1969
In IMTS each base station antenna was located on
a) Tall structure
b) Short structure
c) Long structure
d) Wide structure
13.
14.
15.
16.
17.
18.
19.
20.
Amir ishaq
1. The first telephone was invented by Graham Bell in ___________. (1880, 1876, 1857,
1900)
2. The issued message by a Pager is called as _________. (note, page, data, information)
3. Mobile communications by radio waves is managed in a _______ MHz band.
(800-900, 900-1k, 1.5k-2k, 2k-3k)
4. Cells are distributed in a __________ shape. (circular, hexagonal, rectangular, squarer)
5. AMPS were a _________ system. (American, British, French, German)
6. GSM system was developed in Europe in ________. (1970, 1988, 1990, 2000)
7. Each cell has ____ equidistant neighbors. (3, 4, 5, 6)
8. To find the required location, we have to move on a ____ angle within a cell. (50, 60, 70,
80)
9. The formula for distance measurement of a cell is_________. ( = , R3N, 2, /2)
10. The busiest timings for mobile communication is_______. (9-11 am, 2-4 pm, 4-6pm, 1012pm)
11. There are almost _______ phones worldwide. (500 million, 700 million, 900 million, 1
billion)
12. The optimum channel available for mobile communication in the atmosphere
is________.
(1-10 GHz, 1-20 GHz, 1-100 GHz, 1-200 GHz)
13. Mobile telephone system was introduced in the U.S in _______. (1900, 1946, 1950,
1960)
14. AMPS were publically introduced in Chicago in _______. (1983, 1990, 1995, 1999)
15. There are ____ different multiple access techniques. ( 5,6,7,8)
16. Graham Bell offered his telephone patent to the Western Union for _______.
($1,00,000 , $1 million, $1.5 million, $1 billion)
17. IS-54 was introduced by Telephone Industry Association (TIA) in ______.
(1950, 1960, 1970, 1988)
18. IS-95 was developed by TIA in______.(1990, 1994, 1999, 2002)
19. In 1983, Total Access Communication System (TACS) was deployed in________.
(U.K, USA, Japan, Sweden)
20. Common Air Interface (CAI) defines communication between_________. (BS-MS,
telephone system, wireless system, noise channels).
Zohadul huda
1. There was __________________ no. of users in first generation of mobiles.
a) Fixed
b) Infinite
c) Interchangeable
d) Borrowable
5. In co channel interference
a) Signals remain the same
b) Signals are not shared
c) Signals of a tower go from its area to another area
d) None of the above
10. Which one of the options below is an advantage of fixed channel assignment?
e)
f)
g)
h)
13. If there are no free channels what error would the user receive?
e) Call will be dropped
f) low balance
g) network busy
h) none of the above
20. In a cell the channels for active and handover users are ___________
a) Determined afterwards
b) Pre determined
c) Fixed at a specific condition
d) None of the above
Asif meer
Multiple Choice Questions:-
2-A mobile unit proceed from one cell to another during the course of call is called ____
a. Paging
b. Roaming
c. Handover
d.
None of these
PSTN
IMTS
MTS
MSC
7) i and j are______.
a. positive integer
b. non positive integer
c. non negatice integer
d. none of these.
8)The interconnection of mobile radio transmitters and receivers with the PSTN in ____
a. 1945
b. 1946
c. 1947
d. 1948
9) IS-95 CDMA system provides ______.
a. soft hand off
b. hard hand off
c. a and b both
d. none of these.
876
666
574
654
China
Tokyo
Chicago
Brazil
900
2496
2456
1200
12) The GSM network is divided into three major systems ______.
a. SS,BSS,OSS
b. BTS,BS,MSC
c. CELL,BTS,BS
d. non of these
13) ______ is analog cellular phone system using FDMA
a. AMPS
b. D-AMPS
c. GSM
d. None of these.
14) Channel assignment can be
e.
f.
g.
h.
Fixed
Dynamic
Both
None of these
e.
f.
g.
h.
1db
4db
6db
5db
a. FDMA
b. TDMA
c. CDMA
d. both and b
18)In a .. handoff mobile station can communicate with two base station at
the same time.
e.
f.
g.
h.
Hard
Soft
Medium
None of these
a.
b.
c.
d.
AMPS
D-MPS
GSM
None of these
d. Q-d/r 6n
H M usman
1.
Which duplexing technique allows transmission in both direction but not at the same time?
(1) FDD
(2)Half-duplex
(3)Full-duplex
(4)Simplex
2. All MSCS are connected with
(1) PSTN
(2) MS
(3) MTSO
(4) None of these
3. In TDD MS and BS can communicate with each other at
(1) Same frequencies
(2) Same time
(3)Same frequencies, same time
(4) Same time different frequencies
4. What is the frequency of Bluetooth?
(1)3.84GHz
(2)1.84GHz
(3)2.4 GHz
(4)4.2 GHz
(4) 6660
10. When you are calling from your own country your record and verification is present in
_________.
(1) VLR
(2) MS
(3) MSC
(4) HLR
11. Which channel assignment has less call blocking capability?
(1) Fixed channel
(2) Dynamic channel
(3) Both
(4) None
12. Cellular concepts came into being in
(1) 1 Generation
(2) 2 Generation
(3) 3 Generation
13. In hard handover channel/frequency is changed?
(1) Yes
(2) No
(3) Sometimes
14. RSSI stands for
(1) Random signal storage indicator
(2) Random signal storage identity
(3) Radio signal switched indicator
(4) Radio signal strength indicator
b. 5 GHz
c. 6 GHz
b.1965
c.1966
b. 555
c.666
b. New York
c.CDMA
c. Chicago
c.mobile
11)When a mobile enters area outside the home service area it is registered as in thenew service
area
a. customer b.subscriber c. roamer
12)The process of selecting and allocating channel groups for all base stations within a system is
known as
a. frequency re-use b. frequency planning c.roaming d. both a&b
14)Reduces the call blocking probability and increases system capacity
a. Dynamic Channel b. Fixed Channelc. voice channel
15)The time a call may be maintained within a cell, without handover, is called the
a.call time b.delay time c. dwell time
16)IS-95, Code Division Multiple Access (CDMA) system provides
a. soft handover
b. hard handover
c.hand shake
17)CT provides limited range and mobility in the vicinity of the base station
a. 100m b.500m c.1km
18) In place of the 832 channels available in AMPS the NAMPS system offered
a. 2,496 channels. b. 3,466 channelsc.4,466 channels
20) If the mobile has roaming authorization at home, MSC registers the subscriber in a visiting
location register (VLR) as a
a. valid roamer b. new roamer c.old roamer
Waqar hassan
Paging systems are wireless Communication systems that send brief messages to a
a. provider
b. subscriber
c. both
d. none
MTS
At&t mobile
IMTS
APSCS
a. Mobile Switching Centre(MSC) would process the call made by one mobile phone user
to another mobile phone user.
b. Public Switched Telephone Network(PSTN) would be involved in processing a call
when the call is made by a mobile phone user to a land phone.
c. Both MSC and PSTN processes a call made from a mobile phone to a land phone.
d. Electronic Serial Number(ESN) is the telephone number of the cellular instrument
assigned to the subscriber.
b. Rcc,rvc
c. Fcc,rvc,rcc
d. Fvc ,fcc,rvc,rcc
M umar
1. Which one is nota wave-guided medium?
a) Wired
b) Wireless
c) None of these
d) Both of them
d) 4
d) 4
4. Bluetooth Frequency:
a) 1.4GHz
b) 2.4GHz
c) 3.4GHz
d) 4.4GHz
5. Types of Antenna:
a) 1
b) 2
c) 3
d) 4
c) Cluster
d) MSC
c) None of these
d) Both of them
d) 1952
d) 13
10. How many users were served by IMTS in New York in 1976?
a) 345
b) 445
c) 545
d) 645
c) 25KHz
c) 1986
d) 30KHz
d) 1989
13. Which system was provided by TIA (Telecom Industry Association) in 1988?
a) IS-54
b) IS-95
c) IS-72
d) None of
these
b) 1986
c) 1987
c) FDMA
d) 1988
d) WCDMA
d) 4
d) None of these
c) 3rd Generation
Faheem ali
1
(1) 1
(2) 2
(3)3
(4)4
2 Base station connected with one center called as
(1)PSTN
(2)BS
(3)MSC
(4)None of these
(3) Uplink
(4) None of these
(1) 200-400
(2) 400-600
(3) 700-800
(4) 800-900
14 Data services range of
(1) 1800-1900
(2)1900-2000
(3) 2000-2100
(4) 1700-1800
15 Hard handoff occurs in?
(1) Voice services
(2) Data services
(3) AMPS and GSM
(4) none of these
(4) CDMA
18 In NAMPS each user have ______band?
(1) 10
(2) 20
(3) 30
(4) None of these
18 The interface between the BS and MS is called as
(1) CIA
(2) FIA
(3) FBI
(4) CAI
(a)1876 (b)1833(c)1878(d)1834
2.There are ---------------- million phones in the world.
(a)500(b)600(C)700(d)800
3.In a geostationary satellite system, a message signal is transmittedfrom an earth station via an
(a)uplink(b)downlink(c)transponder(d)msc
4.The geographic area served by a cellular radio system isbroken up into smaller geographic
areas is called
Bs(b)Ms(c)cell(d)unit.
5.A central controller in wireless is (a)msto(b)pstn(c)msc(d)bs
6. AMPS was publicly introduced in Chicago in
(a)1983(b)1938(c)1905(d)1934
7.-------------- was the first system that would permit a userin one European country to operate in
another European
country with the same equipment.
(a)amps(b)namps(c)gsm(d)cdma
8. A cellular telephone system consists of----components
(a)4(b)3(c)5(d)6
9. Types of channels used in a mobile system are
a)2(b)3(c)4(d)5(e)6
10.----------------------- allows subscribers to operate in
mobile phone service areas other service area where the service is subscriber
(a)trunking(b)roaming(c)blocking (d)conference.
11.roamer is receiving information from
(a)fcc(b)rcc(c)fvc(d)rvc.
12.The process of selecting and allocating channel
groups for all base stations within a system is
(a)freq re-use(b)freq planning
(c)freq allocating (d)freq sharing
13.thenumberhexagonal cells per cluster is given by
i2 + ij + j2(b)j2 +i2-ij(c)-i+j+j2(d)i3+j3-ij
14.The time a call may be maintained within a cell,
without handover, is called the
(a)dwell time.(b)waiting time(c)synchronius time(d)call duration
15There are several cells that use the same set
frequencies
(a)co-channel cells(b)same channel(c)bs channel(d)ms channel
16.For hexagonal geometry, co-channel reuse ratio
Q is given by
(a)d/r(b)d*r(c)r/d(d)d2
Inamullah
1. who offered brand new patent
(i) Alexander Graham Bell
(ii) Graham Alexander Bell
(iii)Bell Alexander Graham
(iv) Bell Graham Alexander
2. How many phones in the world in 1882
(i) 500milions
(ii) 600milions
(iii)700milions
(iv) 800milions
3. WAN Stands for
(i) Wide Area Network
(ii) Wide Access Network
(iii)Wireless Area Network
(iv) Wireless Access Network
4. What Communication system used to connect portable handset
(i) Wireless Waves
(ii) Radio Waves
(iii) Satellite Waves
(iv) None Of these
5. PSTN Stands for
a)
b)
c)
d)
6. Paging is a
a)
b)
c)
d)
Technique
Systems
Device
None Of these
(ii) Compaq
(iii)AT&T and Motorola
(iv) Dell
MCQS >
TACS stand for:
1)
2)
3)
4)
Amplitude
Frequency
Wavelength
Power
Base station
Mobile station
Msc
Power sensitive electronic device
Base station
Mobile station
Msc
Power sensitive electronic device
SNR=
1)
2)
3)
4)
S/N
N/S
S*N
S+N
A=Au
1)
2)
3)
4)
U = No. of users
U= total traffic
U= Constant
U= avg. power
100 W =
1)
2)
3)
4)
20Db
30Db
40 Db
50 Db
20 db=
1)
2)
3)
4)
50 dbm
40 dbm
60 dbm
70 dbm
10 dbm=
1)
2)
3)
4)
20 mw
30 mw
40 mw
10 mw
No =
1)
2)
3)
4)
KBFT
KBTT
KBCT
KBHY
RCC=
1)
2)
3)
4)
LTE =
1)
2)
3)
4)
4
5
6
3
US & Asia
US & Australia
US & British
US & Europe
US standard
European Standard
Asian Standard
Australian Standard
US standard
European Standard
Asian Standard
Australian Standard
H usman siddiqe
MCQS
1.The area covered by a BS is called
A.Cell
B.Cluster
C.MSC D.MS
B.7
C.5 D.1
B.600-800
C.700-900 D.None
B.10
C.40 D.20
C.TDMA D.None
11.IS 54 is for
A.TDMA B.CDMA
C.FDMA D.None
D.None
B.R/3N
C.R*3*N D.None
18.In TDD
A. Frequency will be same
B. Frequency Different
C. Time Different
D. Time same
19.In FDD
A. Frequency same
B. Frequency different
C. Time same
D. None
20.CDMA base on
A. Code B. Time C. Frequency D. Magnitude
Unknown
a. FDMA/TDMA
b. CDMA
c. OFDMA
d. None of the above
a. TDD uses different time slots for transmission and reception paths
b. Single radio frequency can be used
c. Duplexer is required
d. It increases the battery life of mobile phones
a. Data network
b. Access Network or Local Loop
c. Bridge network
d. None of the above
The coverage & capacity of CDMA system is more than that of GSM system
a. True b. False
c. Equal d. None of the above
The type of Access technology which can enhance the battery life is
a. CDMA
b. TDMA
a. TDM
1. Erlang B table
2. Erlang C table
3. Queing method
4. None of the above
1. 1850-1910Mhz
2. 1710-1785Mhz
3. 890-915 Mhz
4. None of the above
The technique adopted to increase the system capacity and reduce co-chl
interference is
1. Microcell
2. Macrocell
3. Picocell
4. None of the above
The cell having the same number in the adjacent cluster using the same set of RF
channels are termed as
d. Selective Cell
The terminal is under observation from the network for the possible problems.
Under which list will this belong in EIR
1. White List
2. Grey List
3. Black List
4. None of the above
The process of channel coding, Encryption, Multiplexing and modulation for Trans
direction and reverse for reception are to be carried out by
a. BTS
b. BSC
c. MSC
d. MS
c.third generation
d.fourth generation
b.CSMA/CA
c.Hybrid technique depending on traffic d. Hybrid technique with fixed time partitions
Anss hasan
Q1.Mcqs..
1.
The higher frequencies, that is, ultraviolet light, X-rays and gamma rays, are normally
not used for wirelesstransmission, because of which one of the following reasons?
a. They are difficult to produce and modulate
b. Do not propagate well through buildings
c. They are harmful to humans
d. All of the above
2.
3.
According to Shannons theorem, the maximum data rate D of a noisy channel whose
bandwidth is H Hz, and whose signal-to-noise ratio is S/N, is given by which one of
the following formulae?
a. D = H log2 (1 + S/N)
b. D = H (1 + log2 S/N)
c. D = 2H log2 (1 + S/N)
d. None of the above
4.
5.
6.
Globalstar satellites, which are close to the earth, do not need much power, and their
round-trip delay is only a few milliseconds, are examples of which one of the
following?
a. Geostationary satellites (GEOS)
b. Medium earth orbit satellites (MEOS)
c. Low earth orbit satellites (LEOS)
d. None of the above
7.
8.
9.
10.
(C) Hub
(D) Gateway
CSMA/CD
CSMA/CA
Hybrid technique depending on traffic
Hybrid technique with fixed time partitions
13.EEE has defined the specifications for a wireless LAN, called _______, which
covers the physical and data linklayers.
A)
IEEE 802.3
B)
IEEE 802.5
C)
IEEE 802.11
D)
IEEE 802.2
14. In IEEE 802.11, a ___ is made of stationary or mobile wireless stations and an
optional central base station, known as the access point (AP).
A)
ESS
B)
BSS
C)
CSS
D)
none of the above
C)
ESS-transition
D)
none of the above
20.In IEEE 802.11, _______ is an optional access method that can be implemented in
an infrastructure network (not in an ad hoc network).
A)
DCF
B)
PCF
C)
either (a) or (b)
D)
neither (a) nor (b)
Adnan
1.
Message center (MXE) handles _____________ cell broadcast, voice mail, and
notification.
A.
voice mail
B.
C.
D.
2.
A.
AUC
B.
EIR
C.
Both 1 & 2
D.
3.
The _________ is a database that contains information about the identity of mobile
equipment that prevents calls from stolen, unauthorized, or defective mobile stations.
A.
EIR
B.
HLR
C.
AUC
D.
XME
4.
A.
B.
C.
D.
5.
The __________ protects network operators from different types of fraud found in
today's cellular world.
A.
EIR
B.
AUC
C.
XME
D.
SMSC
6.
Which of these performs such functions as toll ticketing, network interfacing, common
channel signaling?
A.
MSC
B.
VLR
C.
HLR
D.
AUC
7.
A.
BTS
B.
BSC
C.
MSC
D.
Operator
8.
A.
9.6 kbps
B.
56 kbps
C.
144 kbps
D.
270 kbps
9.
The separation between adjacent carrier frequencies is called. In GSM, this is
__________.
A.
100 kHz
B.
200 kHz
C.
225 kHz
D.
250 kHz
10.
GSM uses linear predictive coding (LPC). The purpose of LPC is to ____________ the
bit rate
A.
reduce
B.
increase
C.
maintain
D.
11.
A.
fixed or unfixed
B.
guided or unguided
C.
determinate or indeterminate
D.
metallic or nonmetallic
12.
A.
physical
B.
network
C.
transport
D.
application
13.
_______ cable consists of an inner copper core and a second conducting outer
sheath.
A.
Twisted-pair
B.
Coaxial
C.
Fiber-optic
D.
Shielded twisted-pair
14.
A.
light
B.
radio
C.
infrared
D.
very low-frequency
15.
A.
B.
C.
satellite communications
D.
radio broadcasting
16.
A.
twisted-pair cable
B.
coaxial cable
C.
fiber-optic cable
D.
atmosphere
17.
What is the major factor that makes coaxial cable less susceptible to noise than
twisted-pair cable?
A.
inner conductor
B.
diameter of cable
C.
outer conductor
D.
insulating material
18.
A.
denser than
B.
C.
D.
19.
A.
glass or plastic
B.
copper
C.
bimetallic
D.
liquid
20.
When a beam of light travels through media of two different densities, if the angle of
incidence is greater than the critical angle, _______ occurs.
A.
reflection
B.
refraction
C.
incidence
D.
criticism
21.
When the angle of incidence is _______ the critical angle, the light beam bends along
the interface.
A.
more than
B.
less than
C.
equal to
D.
22.
A.
ground
B.
sky
C.
line-of-sight
D.
23.
Signals with a frequency between 2 MHz and 30 MHz use ______ propagation.
A.
ground
B.
sky
C.
line-of-sight
D.
24.
A.
ground
B.
sky
C.
line-of-sight
D.
25.
A.
omnidirectional
B.
bidirectional
C.
unidirectional
D.
horn
26.
A(n) _____ medium provides a physical conduit from one device to another.
A.
guided
B.
unguided
C.
D.
17.
A.
Coaxial
B.
Fiber-optic
C.
Twisted-pair
D.
18.
A.
Coaxial
B.
Fiber-optic
C.
Twisted-pair
D.
19.
A.
Coaxial
B.
Fiber-optic
C.
Twisted-pair
D.
20.
_____ cable can carry signals of higher frequency ranges than _____ cable.
A.
Twisted-pair; fiber-optic
B.
Coaxial; fiber-optic
C.
Coaxial; twisted-pair
D.
21.
______ cables are composed of a glass or plastic inner core surrounded by cladding,
all encased in an outside jacket.
A.
Coaxial
B.
Fiber-optic
C.
Twisted-pair
D.
22.
A.
Coaxial
B.
Fiber-optic
C.
Twisted-pair
D.
23.
In a fiber-optic cable, the signal is propagated along the inner core by _______.
A.
reflection
B.
refraction
C.
modulation
D.
24.
A.
Guided
B.
Unguided
C.
D.
25.
A.
omnidirectional
B.
unidirectional
C.
bidirectional
D.
26.
A.
omnidirectional
B.
unidirectional
C.
bidirectional
D.
27.
_______ are used for cellular phone, satellite, and wireless LAN communications.
A.
Radio waves
B.
Microwaves
C.
Infrared waves
D.
28.
________ are used for short-range communications such as those between a PC and
a peripheral device.
A.
Radio waves
B.
Microwaves
C.
Infrared waves
D.
29.
A.
What type of modem uses your satellite dish to deliver an Internet connection?
Satellite modem
B)
Telephone modem
C)
DSL
D)
Cable modem
30.
A.
B.
C.
D.
31.
A.
B.
C.
D)
32.
A.
B.
C
D.
33.
A.
B.
C.
D.
communications protocol
communications method
network software
satellite modem
A local area network using wireless technology is termed a:
WLAN
wireless local area network
LAWN
all of the above
34
A)
B)
C)
D)
35.
A)
B)
C)
D)
36.
A third-party company that furnished the conduit for information by providing networks
that cover large geographic areas is called a:
A)
B)
C)
D)
37.
WAN
communications service provider
digital subscriber line
private network
Which of the following networks uses software to establish a secure channel on the
Internet for transmitting data?
A.
wireless network
B.
C.
D.
38.
A.
B.
WiFi
C.
microwave
D.
Bluetooth
39.
All of the following are basic principles of networks, except:
A.
Only one computer must have a network card
B.
There must be communications media connecting the network hardware devices
C.
There must be at least one connecting device
D.
Each computer must have software that supports the movement of information
76. Which device connects multiple computers into a network in which multiple communications
links can be in operation simultaneously?
A) Network interface card
B) Ethernet card
C) Network hub
D) Switch
H asad ali
Multiple Choice Questions
1) cordless sustem mobile provides ______ range?
a) Limited
b) unlimited
c) normal
d) non of these
2) In MTS the user spoke with a mobile operator who actullay dialed the over the ______.
a) BS
b) MSC
c) PTSN
d) non of these
3) In 1969 an additional channels were added in ______ MHZ band
a) 440-446
b) 480-490
c) 454-459
d) 430-435
4) The process of selecting and allocating channels groups for all base stations with a system is
known as ______.
a) frequency planning
b) frequency planning and reusing
c) frequency resuing
d) non of these.
5) Each cell has excatly ______ equidestint neighbours.
a) 5
b)3
c)10
d) 6
6) Channel can be ______.
a) fixed and dynamic
b) fixed
c) dynamic
d) non of these
7) The power level of transmitted by every mobile is controlled by ______.
a) MSC
b) PTSN
c) BS
d) non these
8) CDMA requires very strict power controlled ______.
a) 1db
b) 4db
c) 5db
d) 8db
9) Hexagonal cell per cluster is given by ______.
a) i2 + ij + j
b) j2 + ij+ j
c) i2 + ij + j2
d) 2
j + i j2 +i
10) i and j are______.
a) positive integer
b) non positive integer
c) non negatice integer
d) non of these.
11) IS-95 CDMA system provides ______.
a) soft hand off
b) hard hand off
c) a and b both
d) non of these.
12) For hexagonal geometry ,co-channel reuse ratio Q is given by ______.
a) Q=d/r 4N
b) Q = d/r 3n
c) Q= d/r 5n
d) Q-d/r 6n
14) The GSM network is divided into three major systems ______.
a) SS,BSS,OSS
b) BTS,BS,MSC
c) CELL,BTS,BS
d) non of these
15) In a ______ handoff a mobile station only communicate with base station?
a) Hard
b) Soft
c) Medium
d) Non of these
17) In a ______ handoff mobile station can communicate with two base stations at the same
time.
a) hard
b) soft
c) medium
d) non of these
21)
b) 1876
b)1877
c)1878
d)1879
22) Cordless system mobile provides ____ range?
a) Limited
b) Unlimited
c) Normal
d) None of these
23) A mobile unit proceed from one cell to another during the course of call is called
____
b) Paging
b) Roaming
c) Handover
d) None of these
24) The interconnection of mobile radio transmitters and receivers with the PSTN in ____
a) 1945
b) 1946
c) 1947
d) 1948
25) Second Generation communication system(GSM, GPRS, EDGE) is ____
b) FDMA
b)TDMA
c) CDMA
d) WCDMA
26) In cellular system, the base system is directly connected with
b) MSC
b) PSTN
c) Telephone
d) Both a & b
27) There are ____ types of channels used in mobile system
a) 8
b) 4
c) 10
d) 3
28) For hexagonal geometry, co-channel reuse ratio Q is given by ______
a) Q=d/r 4N
b) Q = d/r 3n
c) Q= d/r 5n
d) Q-d/r 6n
29) It can be shown that the no of hexagonal cells per cluster is given by ____
a) n= i^2+ij+j^2
b) n= i+ij+j
c) n= i^2+j^2
d) n= i+ij-j^2
30) The time a call may be maintained within a cell without handover is called ____
a) Dwell Time
b) MAHO Time
c) BAHO Time
d) None of these
d) None of these
33) There are ____ types of Handover
a) 6
b) 3
c) 10
d) 2
34). MAHO is based on the power measurement directly from ____
a) Mobile
b) Base Station
c) Both a & b
d) None of these
35) BAHO is based on the power measurement directly from ____
a) Mobile
b) Base Station
c) Both a & b
d) None of these
36) Number of different radio signals measured by ____
a) RSSI
b) DWELL TIME
c) SCATTERS
d) DIFFRACTOR
37) In a ____ handoff mobile station can communicate with two base stations at the same time.
a) Hard
b) Soft
c) Medium
d) None of these
38) GSM allows reuse factors of ____
a) 1
b) 3
c) 5
d) 7
39) GSM is digital cellular phone system using ____
e)
FDMA
f)
TDMA
g)
CDMA
h)
Both a & b
AMPS
f)
DMPS
g)
GSM
h)
None of these
Abid
1 In TDD MS and BS can communicate with each other at
(1) Same frequencies
(2) Same time
(3)Same frequencies, same time
(4) Same time different frequencies
2 Which duplexing technique allows transmission in both direction but not at the same time?
(1) FDD
(2)Half-duplex
(3)Full-duplex
(4)Simplex
3 All MSCS are connected with
(1) PSTN
(2) MS
(3) MTSO
(4) None of these
4 What is the frequency of Bluetooth?
(1)3.84GHz
(2)1.84GHz
(3)2.4 GHz
(4)4.2 GHz
5 Shape of cell must be
(1) Hexagonal
(2) Octagonal
(3) Square
(4) Circular
6 Range of mobile cummunication
(1) 800-900 MHz
(2) 800-1200 MHz
(3) 600-800 MHz
(4) 600-700 MHz
7 AMPS stands for
(1) Auto mobile phone system
(2) American mobile phone system
(3) Advanced mobile phone system
(4) None of these
(3) 3 Generation
12 Which channel assignment has less call blocking capability?
(1) Fixed channel
(2) Dynamic channel
(3) Both
(4) None
13 In hard handover channel/frequency is changed?
(1) Yes
(2) No
(3) Sometimes
14 RSSI stands for
(1) Random signal storage indicator
(2) Random signal storage identity
(3) Radio signal switched indicator
(4) Radio signal strength indicator
15 Which type of handover is faster?
(1) MAHO
(2) BAHO
(3) Soft handover
(4) Hard handover
(3) MTSO
(4) MS
20 Omni-directional antenna is also called
(1) Edge Excited
(2) Centered Excited
(3) Base Excited
(4) None of these
Javeria
MCQ's
1:The world's first cellular system was implemented by Nippon telephne and telegraph company
in...........
a:USA b:China c:Japan d:Austrilla
2:Coverage area of a base station is called........
a:cell b:uplink c:control channel d:handoff
3:The process of transferring a mobile station fron one channel to another is called.....
a:handoff b:cell c:intensity d:page
4:Communication system that send breif messages to subscriber..........
a:paging system b:mobile system c:roamer 4:none
5:Total access communication was develop 1983 in.........
a:USA b:UK c:Gremany 4:japan
6:Alexender graham bell invented the telephone in............
a:1947 b:1882 3:1876 4:1867
7:There are .......million phones in the world.
a:100 b:300 c:700 d:800
8:Amps was publicly introduced in 1983 at.........
a:los vegas b:califorina c:chicago d:texas
9:co-channel inter depends upon.........
a:D=underroot R b:D=Runderoot 3N c:a=mg d:d=h/v
10:For hexogonal geometry,co-channel reuse ratio Q is given by....