Professional Documents
Culture Documents
Sub Parameter
IdleSintersearc
h
Value
SIB11Ind
TRUE
IdleQoffset1sn
IdleQoffset2sn
SE Parameter Baseline
0
5
Sub Parameter
Value
SIB11Ind
TRUE
IdleQoffset1sn
IdleQoffset2sn
0
3
Note (The load in the same sector can be adjusted. M2000 1 min monitoring can be
used to analyse the load balancing has been triggered) .
Value
PCPICHPOWER
330
Trigger when cells have been detected as bad access performance due to
resource limitation. RRC Congestion rate is more than 10% and CS blocking rate
is more than 5%.
Note (When reducing the CPICH all the cells (layers) in the sector have to be on same
level for example if degradation is observed on 209682_SurryHillsNorth_MO_U21A_3
and CPICH has to be reduced it will be done for both carriers
209682_SurryHillsNorth_MO_U21A_3 and 209682_SurryHillsNorth_MO_U21B_3.
Sub Parameter
UCELLSELRESEL
SsearchRat
Value
3
SE Parameter Baseline
1
GCELLCCUTRANS
YS
FDDQMIN
Sub Parameter
UCELLSELRESEL
UCELLINTERRATH
OCOV
UCELLINTERRATH
OCOV
SsearchRat
InterRATCSThd2D
EcN0
InterRATCSThd2F
EcN0
GCELLCCUTRANSY
S
FDDQMIN
Valu
e
SE Parameter
Baseline
-10
-12
-8
-10
Works great with GSM co-site can also be implemented on the tier 1 neighbours than
other GSM neighbouring cells can be changed according to the congestion.
Sub Parameter
QualMeas
Value
CPICH_EC
NO
Qqualmin
-14
Qrxlevmin
-52