Improve water conservation and minimize environmental impact
As water conservation becomes a greater public concern, the amount of water used in drilling operations has also come under scrutiny. Fortunately, Baroid dewate ring systems allow you to both recycle water and reduce the amount of waste tran sported and disposed of in the environment. Baroid uses both chemical and mechanical means to separate water from suspended solids. With our ENVIRO-FLOC dewatering system, coagulation and flocculation are applied to the fluid to chemically remove fine solids. In addition, a decanting centrifuge employs mechanical separation, all in a versatile, mobile and winter ized unit. Recycle to reduce costs The ENVIRO-FLOC system, and dissolved air flotation (DAF) units, can be used onsi te to treat and recycle water as part of the solids control system, or to reduce total waste volume for subsequent disposal. Reclaimed water can then be reused in the drilling fluid, reducing fresh water consumption and costs, as well as re ducing costly transport. Versatile units, customized to meet project needs Our high capacity, ENVIRO-FLOC system can process up to 300 gallons per minute, a capability that assures high ROP operations won t be hindered. Plus, its versati le design allows it to be fitted onto skids or trailers for full mobility and, b ecause it is winterized, can be used in extremely cold conditions. Baroid engine ers can design the entire waste management system around your specific operation al requirements. Integration of the unit and each piece of equipment with the wa ste management system is assured via Baroid s proven processes.