snnazor4
Tutorial 2 - More 2D Machining
Hoip: Tutorial 2 - More 2D Machining
In this tutorial, you wil lear how to machine the part shown above using the folowing procedures:
+ Creating a Setup
+ 20 Contouring
+ Pocket Machining
+ Dailing
+ Tapping
+ Counterboring
+ Countersinking
+ Chamfering
+ Post Processing
Betore proceeding, please open the part Tutorial2 pt in Inventor HSM.
LIKE (0)
Note: The files used in these tutorials, as well as other sample datasets, can be found inthe C:\Users\Public\Documents\Autodesk\tnventor
HSM 2015\Examples subfolder
Topics in this section
+ To Create the Setup (Tutorial 2)
+ To Contour the Part (Tutorial 2)
+ To Machine the Internal Pocket
+ To Drill the Threaded Holes
+ To Tap Holes (Tutorial 2)
+ To Drill the Counterbored Hole
+ To Machine the Counterbore
‘+ To Machine the Countersinks
+ To Machine the Chamfor
+ To Post Process the Toolpaths (Tutor
Parent opie: ')\o"s
Was this Article Helpful?
Please help us improve the content on this sit. Was this article helpful? [Yes] { No
hitpwhole autodesk convviow/INVHSM2015/ENU/7quld=GUID-E874AEGE CDSC-48EA 8800-20290C020398
“4snnazor4 Hoip: Tutorial 2 - More 2D Machining
hitpwhole autodesk convviow/INVHSM2015/ENU/7quld=GUID-E874AEGE CDSC-48EA 8800-20290C020398snnazor4 Hoip: Tutorial 2 - More 2D Machining
hitpwhole autodesk convviow/INVHSM2015/ENU/7quld=GUID-E874AEGE CDSC-48EA 8800-20290C020398snnazor4 Hoip: Tutorial 2 - More 2D Machining
hitpwhole autodesk convviow/INVHSM2015/ENU/7quld=GUID-E874AEGE CDSC-48EA 8800-20290C020398
“4