Professional Documents
Culture Documents
Technical Specification Simba 1250-Series - 9851 2133 01 - tcm835-1533189
Technical Specification Simba 1250-Series - 9851 2133 01 - tcm835-1533189
Simba 1250-series
Technical specification
Standard features
Rock drill
Atlas Copco COP 1800-series
Dual-damping system for shock wave absorption and
continuous rock contact for high penetration
Lubricated and pressurized mating surfaces giving long
service intervals
Shank adapters suitable for the given hole range
Drilling unit
Mechanized rod handling system
Feed with hydraulic two-stage cylinder
Front- and rear-mounted stingers
Drill steel support for guidance during collaring and
as support during rod handling
Positioning unit
Available in three configurations:
-- Simba 1252 with tilt, rotation and pendulum arm
-- Simba 1253 with tilt, rotation and slide table
-- Simba 1254 with tilt, rotation, pendulum arm and slide
table
Accurate and smooth movements
Mine-adapted, sturdy components
Control system
Electrical Direct System (EDS)
Anti-jamming system
Carrier
Mine-adapted carrier for small- to medium-sized drifts with
articulated steering and four-wheel drive
General
Trolley-mounted operator panel
FOPS-approved protective roof
Electrical cable reel
Working lights on tripods
Simba 1250-series
Specifications
Electrical system
ROCK DRILL
COP 1838ME
Shank adapter
Hole diameter
Impact power
Impact rate
Hydraulic pressure, max.
Rotation motors
Rotation speed
Lub. air consump. (at 3 bar)
Water consumption
Weight
FEED
BMH 214
BMH 215
BMH 216
Air system
3,160 mm
Total length
1,220 mm
Drill rod length
Total length with extractor 3,365 mm
3,465 mm
1,525 mm
3,670 mm
3,770 mm
1,830 mm
3,975 mm
BMH 200
Drilling unit
Water system
Positioning system
Feed extension (with 4 drill steel).............................. 900 mm
Feed extension (with 5 and 6 drill steel)................ 1,200 mm
Rotary Acurator BHR 30 for 360 ring drilling
Sliding table BHT 15 gives 1.5 m feed parallel positioning
Pendulum arm, BHP 12 gives 1.5 m feed parallel positioning
in the side walls. Adds further 1.5 m feed parallel positioning
upwards/downwards.
Stinger backward on feed . ...................................... BSJ 8-115
Stinger forward on feed . ......................................... BSJ 8-115
Feed dump, drilling.............. +20 forward and -80 backward
Rig alignment laser....................................................RAL 650
Control system
Electrical Direct System, EDS
Basic functions such as semi-automatic drilling and
anti-jamming included
Power pack
Hydraulic pump for percussion, positioning, feed
Hydraulic pump for rotation
Pumps unloaded at start
System pressure, max................................................... 230 bar
Hydraulic oil tank, volume............................................... 124 l
Low oil level indicator and shut-down
Oil temperature gauge on oil tank, electronically supervised
Electric oil filling pump
Filtration, absolute.......................................................... 16 m
Oil filter indicator
Water cooled oil cooler in stainless steel
Mineral hydraulic oil
Carrier
Engine...........................................................Deutz F5L 912W
Power rating at 2,300 rpm..............................................52 kW
Torque at 1,550 rpm ....................................................248 Nm
Fixed seat for tramming, including safety belt
Articulated steering................................... 41 steering angle
Four-wheel drive
FOPS-approved protective roof
Hydrostatic power steering system
Hydrodynamic transmission..................................Clark 24000
Front axle .............................................................. DANA 112
Rear axle...................................... DANA 112, 10 oscillation
Automatic differential lock on front axle, limited slip
Tyres.........................................................................8.25xR 15
Clearence outside axles....................................................... 15
Hydraulic jacks, front........................................... 2 extendable
Hydraulic jacks, rear...............................................................2
Service brakes .2 separate circuits (hydraulically applied, fully
enclosed wet disc brakes)
Emergency and parking brakes......................................SAHR
Fuel tank, volume............................................................... 60 l
Electric system..................................................................24 V
Batteries.......................................................................2x70 Ah
Tramming lights........................................................... 8x70 W
Brake lights
Illuminated stairs for platform
Central lubrication system
Catalyser
Silencer
Fire extinguisher
Spirit levels
Gradeability at max load on drive wheels........................... 1:4
Tramming speed on flat ground................................ >10 km/h
Tramming speed on incline 1:8................................... >4 km/h
Horn, beacon and reverse alarm
Outlet for communication radio........................................12 V
Rig alignment laser RAL 650
Simba 1250-series
Specifications
DRILL STEEL
Rock drill
Hole diameter, mm
Drill rod
Shank adapter
Guide tube
COP 1838ME
5164
R32 Speedrod
R32
TDS 45
COP 1838ME
6476
T38 Speedrod
T38
TDS 56/TDS 64
COP 1838HE
7689
T45 Speedrod
T45
TDS 64/TDS 76
COP 2550UX*
7689
(T45)*
(T45)
TDS 64
COP 2550UX*
89102
T51*
T51
TDS 76
COP 2550UX*
89102
TDS 64/76*
ST58
N/A
Optional equipment
Drilling system
Water mist flushing, water oil cooler, external air supply
Water mist flushing, air oil cooler, external air supply
Rock drill lubrication surveillance system
Dry drilling with dust collector
COP 1838MUX, COP 1838HE, COP 1838HUX,
COP 2550UX
Positioning system
Angle Reading Instrument, ARI 6C with/without hole
depth
Hole depth measurement
Thread lubrication kit
Automatic lubrication for positioning/drilling system
Central lubrication for positioning/drilling system
Power packs
Air cooler
Carrier
Fire suppression system, manual/CheckFire/automatic
Electrical system
Electrical cable on reel, H07RN-F
Electrical cable on reel, Buflex
Plug PC4
Socket PC4
Switch gear
Electrics according to local standards
Working lights on tripods, 2x500 W, 230 V
Miscellaneous
Rod holder for extra drill rods
Manual lubrication kit
Rig washing kit
Shelf for drill bits and tools
Simba 1250-series
Measurements
SIDE VIEW
Simba 1254
20o
80o
C
1350
Simba 1252
1960
1350
B
1810
1150
45o
235
1150
240
1590
2000
800
2000
2000
2380
depending on surface
Voltage
Outer
5,100
Inner
2,5002,700
DIMENSIONS
mm
Type
Dimension, mm2
Diameter,
mm
Length,
m
380400 V
Buflex
3x70+3G16+2x1.5
37
125
440575 V
Buflex
3x50+3G10+2x1.5
32
150
Width
2,060
660690 V
Buflex
3x35+3G6+2x1.5
28
205
2,660/2,770/2,810
1,000 V
Buflex
3x35+3G6+2x1.5
28
205
Height roof up
2,900
6,580/6,880/7,180
Ground clearance
260
WEIGHT
gross weight
kg
800
1500
TURNING RADIUS
mm
750
1350
1350
1150
240
1350
45
1500
1500
45o
45o
1150
750
1150
1150
1500
945
945
750 750
SIMBA 1254
SIMBA 1253
945
COVERAGE AREA
SIMBA 1252
Total
12,500
G = Protection yellow/green
Recommendations are given for surrounding temperature of 40C.
1990
Copyright 2012, Atlas Copco Rock Drills AB, rebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited.
Illustrations and photos in this brochure may show equipment with optional extras. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information.
1915
1670
2200
700
Simba 1253