Professional Documents
Culture Documents
1 of 4
http://britton.disted.camosun.bc.ca/chinesering/ninering.html
Materials :
6 3/4 inch brass rings
5 pieces of 3-inch wire
1 piece of 15-inch wire
Tools:
a pair of pliers
a ruler
Step 1
Step 2
Put one ring onto the hook. Close the gap with
the pliers.
5/25/2015 10:26 PM
2 of 4
http://britton.disted.camosun.bc.ca/chinesering/ninering.html
Step 3
Step 4
Step 5
Step 6
Using the sixth ring as the base, put the hook of Repeat with the fourth ring, making sure to pass
the fifth ring into the sixth ring and close the gap the wire through the ring of the fifth, connecting
with the pliers.
it to the sixth ring and closing the gap.
5/25/2015 10:26 PM
3 of 4
http://britton.disted.camosun.bc.ca/chinesering/ninering.html
Step 7
Step 8
Step 9
Step 10
Take the 15-inch wire and bend it in half. Push Bend the wire into a T-shape so that the
the two ends of the wire through the 5 rings.
verticals measure 4 inches from base to top.
Make sure the wire of the rings is between the 2
ends of the 15-inch wire.
5/25/2015 10:26 PM
4 of 4
http://britton.disted.camosun.bc.ca/chinesering/ninering.html
Step 11
Step 12
Step 13
Finish
5/25/2015 10:26 PM