Professional Documents
Culture Documents
Model Turbofan With Catia
Model Turbofan With Catia
Step 1
1. Create the circle on the yz-plane. Exit sketcher. Be sure to name your sketches, otherwise it's
difficult to keep track of everything.
2. Step 2
2. Enter sketcher on the yz-plane and create the spline shown. Exit sketcher.
3. Step 3
3. Create the following spline on the yz-plane. Exit sketcher.
4. Step 4
4. Create the following spline on the zx-plane. Exit sketcher.
5. Step 5
5. Create the following spline on the zx-plane. Exit sketcher.
6. Step 6
6. Extrude the first spline.
7. Step 7
7. Extrude the 2nd spline.
8. Step 8
8. and the 3rd...
9. Step 9
9. and the 4th... You should end up with a kind-of box.
10.
Step 10
11.
Step 11
12.
Step 12
13.
Step 13
13. Create 2 intersection points. Click the button shown to add the 2 curves.
14.
Step 14
14. Enter sketcher on the plane you just made and make the following shape. The two endpoints
should be coincident with the two intersection points you just made.
15.
Step 15
1. Step 16
16. Make 2 more intersection points.
2. Step 17
17. Create the shape shown, following similar procedure as the one before.
3. Step 18
18. Make the profile shown on the zx-axis. The left-most point should be coincident with the H-axis.
The right-most point should be coincident with the V-axis.
4. Step 19
19. Make the line shown.
5. Step 20
20. Make a Revolution Surface with both the profile and line you made earlier. The command for it
is underneath the Extrude command.
6. Step 21
21. Create a multisection surface. Make sure the closing points are correct.
7. Step 22
22. Create another circle on the yz-plane.
8. Step 23
23. Extrude the circle.
9. Step 24
24. Split the fan blade and extruded circle. Click Other Side if the wrong part is cut out.
10.
Step 25
11.
Step 26
12.
Step 27
27. Enter sketcher on the yz-plane and project the spiral, then offset it and close the ends.
13.
Step 28
14.
Step 29
15.
Step 30
16.
Step 31
31. Fill in the empty space using the spinner as the Support.
17.
Step 32
18.
Step 33
19.
Step 34
34. You are done! Go ahead and render it and admire your work.
35. If you have any questions, feel free to ask either on here or as a private message.