You are on page 1of 3

3106 , 3206 , 3412 , 3418

#RBS 3106
3G outdoor cabinet
contain the following units :
1- ACCU
ac connection unit >> used to connect , disconnect and distribute the incoming AC power
supply to the PSUs
2- PSUs
power supply unit >> used to converting and rectifying the AC power into -48 volt DC to feed
the various units of the RBS
3- DC / DC
dc to dc converter used to convert the incoming -48 volt in to +24 volt #its optional unit smile

4- power bar
used to distribute the internal -48 volt to the various units from the PSUs to the PDUs AND
BFUs
5- PDU
power distribution unit >> used to supply the climate unit , fan control unit and radio units and
supply the digital sub rack VIA the CBU
6- BFU
battery fuse unit >> used to connect , disconnect and control the batteries link to the RBS
units
7- CU

climate unit >> used to adjust the temperature , humidity of the RBS by the FCU , its located
beside the RBS door and contain air to air ex-changer , heating and cooling unit
8- FCU
fan control unit >> its the fan speed controlling unit according to the temp of the RBS various
units
9- AUH
auxiliary unit hub >> located in the power subrack , used to connect the auxiliary units like
PSUs to the EC
10 - XALM >> external alarm unit
11- DF
distribution frame >> used to provide OVP over voltage protection
#DIGITAL SUB RACK
its the main and most important unit in the cabinet grin
consist of the following units :
a- CBU
control base unit >> its the microprocessor , provide ATM switch for all units connected to the
back plane , also provide timing unit and signal clock synchronization , supply the digital sub
rack by -48 VDC , finally its provide E1 and T1 interface grin
b- RAX board
random access and receiver board >> implement he uplink base band processing for signals
c- TAX board
transmission board >> implement the down link base band signal processing
d- RUIF

radio interface unit >> used to connect the radio units and its connected to the ATM switch
VIA the digital sub rack
#RADIO sub rack
1- provide analog to digital conversion and vice versa
2- signal modulation and demodulation
3- signal RF carrier combining
RU
radio units >> contain the TRX , PA power amplifiers
whats the the main differences between this RBS and the 2106 one which described before

You might also like