Professional Documents
Culture Documents
Six Sigma is a process improvement set of tools and strategies, originally developed by
Motorola in 1986.[1][2] Six Sigma became well known after Jack Welch made it a central focus of
his business strategy at General Electric in 1995,[3] and today it is used in different sectors of
industry.[4]
Six Sigma seeks to improve the quality of process outputs by identifying and removing the
causes of defects (errors) and minimizing variability in manufacturing and business processes.[5]
It uses a set of quality management methods, including statistical methods, and creates a special
infrastructure of people within the organization ("Champions","Black Belts", "Green
Belts","Orange Belts", etc...) who are experts in these very complex methods.[5] Each Six Sigma
project carried out within an organization follows a defined sequence of steps and has quantified
financial targets (cost reduction and/or profit increase).[5]
The term Six Sigma originated from terminology associated with manufacturing, specifically
terms associated with statistical modeling of manufacturing processes. The maturity of a
manufacturing process can be described by a sigma rating indicating its yield or the percentage
of defect-free products it creates. A six sigma process is one in which 99.99966% of the products
manufactured are statistically expected to be free of defects (3.4 defects per million), although,
as discussed below, this defect level corresponds to only a 4.5 sigma level. Motorola set a goal of
"six sigma" for all of its manufacturing operations, and this goal became a byword for the
management and engineering practices used to achieve it.
Historical overview
Six Sigma originated as a set of practices designed to improve manufacturing processes and
eliminate defects, but its application was subsequently extended to other types of business
processes as well.[6] In Six Sigma, a defect is defined as any process output that does not meet
customer specifications, or that could lead to creating an output that does not meet customer
specifications.[5]
CEO Bob Galvin was always focused on improving the quality of Motorola products. Galvin
found an ally in John F. Mitchell,[7][8][9] a young engineer on the rise to becoming Chief Engineer.
Mitchell was seen as a demanding,[10][11] hands-on manager who cared for his co-workers[12][13]
and insisted on team effort.[14] Mitchell believed in building quality into the engineering and
manufacturing processes as a way of lowering costs and improving yield.[10] He also favored
competition among product lines and distributors as a business discipline to both reduce costs
and to promote quality improvement.[12]Mitchells early successes with quality control appeared
with the introduction of a new digital transistorized Pager, and the formalization of improvised
Mitchell Quality Tests.[15] Mitchell also used Shainin Methods and other tests[16] in his operations.
[17]
John F. Mitchell set the bar high for his engineers knowing they would respond.[18] By the
early 1970s, as John F. Mitchell was on his ascendancy to General Manager, Communications
Division in 1972, Motorola had established itself as second largest producer of electronic
equipment behind IBM,[19] and as the world leader in wireless communication products, and had
been battling Intel and Texas Instruments for the number one slot in Semiconductor sales.
Motorola was also the largest supplier of certain parts and products to Japan's National Telegraph
& Telephone Company, but at the same time, the Japanese were beginning to erode Motorola's
lead in the Pager market.[20] The rapid successes and expansion of the Motorola Pager business
created by John F. Mitchell, as cited above, led to competitive deficiencies in quality controls,
notwithstanding the "Mitchell Testing."
In the late 1970s, as John F. Mitchell was on the ascendancy to being named President & COO in
1980, he was joined by other senior managers, notably, CEO Bob Galvin, Jack Germain,[19][21]
and Art Sundry,[14][15][22][23] who worked in John F. Mitchell's Pager organization to set the quality
bar 10x higher. Sundry was reputed to have shouted "Our Quality Stinks"[20] at an organizational
meeting attended by Galvin, John F. Mitchell and other Senior Executives; and Sundry got to
keep his job.[20] But most importantly, the breakthroughs occurred when it was recognized that
intensified focus and improved measurements, data collection, and more disciplined statistical
approaches[23][24][25] John F. Mitchell's untiring efforts,[10][26] and support from Motorola
engineers[14] and senior management, prevailed and brought Japanese quality control methods
back to the USA,[27] and resulted in a significant and permanent change in culture at Motorola.
"We ought to be better than we are," said Germain, director of Quality Improvement.[20] The
culmination of Motorola quality engineering efforts occurred in 1986, with the help of an outside
quality control consultant who joined Motorola, Bill Smith[28][29][30][31] when the Motorola
University and Six-Sigma Institute[27] was founded. Two years later, in 1988, Motorola received
the coveted Malcolm Baldrige National Quality Award[32] which is given by the United States
Congress. Later, the Six Sigma processes subsequently were adopted at the General Electric
Corporation. Jack Welch said: "Six Sigma changed the DNA of GE."[23][33] The Six Sigma process
requires 99.99967% error free processes and products, (or 3.4 parts per million defects or less).
[20]
Without the Six Sigma process controls, it may not have been possible for John F. Mitchell to
launch the Iridium satellite constellation, one of the most complex projects undertaken by a
private company, which involved some 25,000 electronic components,[34] and took 11 years to
develop and implement at a cost of $5 Billion.[34] Six Sigma processes resulted in $1617 Billion
in savings to Motorola as of 2006.[23][35] A search of Safari Books Online reveals 1062 books
written about Six Sigma.[23] with 532 published since 2009.[4]
Continuous efforts to achieve stable and predictable process results (i.e., reduce process
variation) are of vital importance to business success.
Features that set Six Sigma apart from previous quality improvement initiatives include:
A clear focus on achieving measurable and quantifiable financial returns from any Six
Sigma project.[5]
A clear commitment to making decisions on the basis of verifiable data and statistical
methods, rather than assumptions and guesswork.[5]
The term "Six Sigma" comes from a field of statistics known as process capability studies.
Originally, it referred to the ability of manufacturing processes to produce a very high proportion
of output within specification. Processes that operate with "six sigma quality" over the short term
are assumed to produce long-term defect levels below 3.4 defects per million opportunities
(DPMO).[36][37] Six Sigma's implicit goal is to improve all processes to that level of quality or
better.
Six Sigma is a registered service mark and trademark of Motorola Inc.[38] As of 2006 Motorola
reported over US$17 billion in savings[39] from Six Sigma. Other early adopters of Six Sigma
who achieved well-publicized success include Honeywell (previously known as AlliedSignal)
and General Electric, where Jack Welch introduced the method.[40] By the late 1990s, about twothirds of the Fortune 500 organizations had begun Six Sigma initiatives with the aim of reducing
costs and improving quality.[41]
In recent years, some practitioners have combined Six Sigma ideas with lean manufacturing to
create a methodology named Lean Six Sigma.[42] The Lean Six Sigma methodology views lean
manufacturing, which addresses process flow and waste issues, and Six Sigma, with its focus on
variation and design, as complementary disciplines aimed at promoting "business and
operational excellence".[42] Companies such as IBM and Sandia National Laboratories use Lean
Six Sigma to focus transformation efforts not just on efficiency but also on growth. It serves as a
foundation for innovation throughout the organization, from manufacturing and software
development to sales and service delivery functions.
Methods
Six Sigma projects follow two project methodologies inspired by Deming's Plan-Do-Check-Act
Cycle. These methodologies, composed of five phases each, bear the acronyms DMAIC and
DMADV.[41]
DMAIC is used for projects aimed at improving an existing business process.[41] DMAIC
is pronounced as "duh-may-ick" (<d me k>).
DMADV is used for projects aimed at creating new product or process designs.[41]
DMADV is pronounced as "duh-mad-vee" (<d md vi>).
[edit] DMAIC
The DMAIC project methodology has five phases:
Define the problem, the voice of the customer, and the project goals, specifically.
Measure key aspects of the current process and collect relevant data.
Analyze the data to investigate and verify cause-and-effect relationships. Determine what
the relationships are, and attempt to ensure that all factors have been considered. Seek out
root cause of the defect under investigation.
Improve or optimize the current process based upon data analysis using techniques such
as design of experiments, poka yoke or mistake proofing, and standard work to create a
new, future state process. Set up pilot runs to establish process capability.
Control the future state process to ensure that any deviations from target are corrected
before they result in defects. Implement control systems such as statistical process
control, production boards, visual workplaces, and continuously monitor the process.
Some organizations add a Recognize step at the beginning, which is to recognize the right
problem to work on, thus yielding an RDMAIC methodology.[43]
Define design goals that are consistent with customer demands and the enterprise
strategy.
Measure and identify CTQs (characteristics that are Critical To Quality), product
capabilities, production process capability, and risks.
Analyze to develop and design alternatives, create a high-level design and evaluate design
capability to select the best design.
Design details, optimize the design, and plan for design verification. This phase may
require simulations.
Verify the design, set up pilot runs, implement the production process and hand it over to
the process owner(s).
5 Whys
Pareto analysis
Analysis of variance
Pareto chart
Pick chart
Axiomatic design
Process capability
Check sheet
Regression analysis
Control chart
Correlation
Run charts
Cost-benefit analysis
Scatter diagram
CTQ tree
Design of experiments
Stratification
Taguchi methods
Histograms
TRIZ
Executive Leadership includes the CEO and other members of top management. They are
responsible for setting up a vision for Six Sigma implementation. They also empower the
other role holders with the freedom and resources to explore new ideas for breakthrough
improvements.
Champions take responsibility for Six Sigma implementation across the organization in
an integrated manner. The Executive Leadership draws them from upper management.
Champions also act as mentors to Black Belts.
Master Black Belts, identified by champions, act as in-house coaches on Six Sigma. They
devote 100% of their time to Six Sigma. They assist champions and guide Black Belts
and Green Belts. Apart from statistical tasks, they spend their time on ensuring consistent
application of Six Sigma across various functions and departments.
Black Belts operate under Master Black Belts to apply Six Sigma methodology to specific
projects. They devote 100% of their time to Six Sigma. They primarily focus on Six
Sigma project execution, whereas Champions and Master Black Belts focus on
identifying projects/functions for Six Sigma.
Green Belts are the employees who take up Six Sigma implementation along with their
other job responsibilities, operating under the guidance of Black Belts.
Some organizations use additional belt colours, such as Yellow Belts, for employees that have
basic training in Six Sigma tools and generally participate in projects and 'white belts' for those
locally trained in the concepts but do not participate in the project team.[45]
[edit] Certification
Corporations such as early Six Sigma pioneers General Electric and Motorola developed
certification programs as part of their Six Sigma implementation, verifying individuals'
command of the Six Sigma methods at the relevant skill level (Green Belt, Black Belt etc.).
Following this approach, many organizations in the 1990s started offering Six Sigma
certifications to their employees.[41][46] Criteria for Green Belt and Black Belt certification vary;
some companies simply require participation in a course and a Six Sigma project.[46] There is no
standard certification body, and different certification services are offered by various quality
associations and other providers against a fee.[47][48] The American Society for Quality for
example requires Black Belt applicants to pass a written exam and to provide a signed affidavit
stating that they have completed two projects, or one project combined with three years' practical
experience in the body of knowledge.[46][49] The International Quality Federation offers an online
certification exam that organizations can use for their internal certification programs; it is
statistically more demanding than the ASQ certification.[46][48] Other providers offering
certification services include the Juran Institute, Six Sigma Qualtec, Air Academy Associates and
many others.
Graph of the normal distribution, which underlies the statistical assumptions of the Six Sigma
model. The Greek letter (sigma) marks the distance on the horizontal axis between the mean, ,
and the curve's inflection point. The greater this distance, the greater is the spread of values
encountered. For the green curve shown above, = 0 and = 1. The upper and lower
specification limits (USL and LSL, respectively) are at a distance of 6 from the mean. Because
of the properties of the normal distribution, values lying that far away from the mean are
extremely unlikely. Even if the mean were to move right or left by 1.5 at some point in the
future (1.5 sigma shift, coloured red and blue), there is still a good safety cushion. This is why
Six Sigma aims to have processes where the mean is at least 6 away from the nearest
specification limit.
Sigma levels
A control chart depicting a process that experienced a 1.5 sigma drift in the process mean toward
the upper specification limit starting at midnight. Control charts are used to maintain 6 sigma
quality by signaling when quality professionals should investigate a process to find and eliminate
special-cause variation.
See also: Three sigma rule
The table[51][52] below gives long-term DPMO values corresponding to various short-term sigma
levels.
It must be understood that these figures assume that the process mean will shift by 1.5 sigma
toward the side with the critical specification limit. In other words, they assume that after the
initial study determining the short-term sigma level, the long-term Cpk value will turn out to be
0.5 less than the short-term Cpk value. So, for example, the DPMO figure given for 1 sigma
assumes that the long-term process mean will be 0.5 sigma beyond the specification limit (Cpk =
0.17), rather than 1 sigma within it, as it was in the short-term study (Cpk = 0.33). Note that the
defect percentages indicate only defects exceeding the specification limit to which the process
mean is nearest. Defects beyond the far specification limit are not included in the percentages.
Sigma level
1
2
3
4
5
6
7
DPMO
691,462
308,538
66,807
6,210
233
3.4
0.019
Percent defective
69%
31%
6.7%
0.62%
0.023%
0.00034%
0.0000019%
Percentage yield
31%
69%
93.3%
99.38%
99.977%
99.99966%
99.9999981%
Short-term Cpk
0.33
0.67
1.00
1.33
1.67
2.00
2.33
Long-term Cpk
0.17
0.17
0.5
0.83
1.17
1.5
1.83
Arena
Bonita Open Solution BPMN2 standard and KPIs for statistic monitoring
JMP
Mathematica
MATLAB
Microsoft Visio
Minitab
SDI Tools
SigmaXL
SPC XL
STATA
Statgraphics
STATISTICA
Application
Six Sigma mostly finds application in large organizations.[58] An important factor in the spread of
Six Sigma was GE's 1998 announcement of $350 million in savings thanks to Six Sigma, a
figure that later grew to more than $1 billion.[58] According to industry consultants like Thomas
Pyzdek and John Kullmann, companies with fewer than 500 employees are less suited to Six
Sigma implementation, or need to adapt the standard approach to make it work for them.[58] This
is due both to the infrastructure of Black Belts that Six Sigma requires, and to the fact that large
organizations present more opportunities for the kinds of improvements Six Sigma is suited to
bringing about.[58]
In healthcare
Six Sigma strategies were initially applied to the healthcare industry in March 1998. The
Commonwealth Health Corporation (CHC) was the first health care organization to successfully
implement the efficient strategies of Six Sigma.[59] Substantial financial benefits were claimed,
for example in their radiology department throughout improved by 33% and costs per radiology
procedure decreased by 21.5%;[60] Six Sigma has subsequently been adopted in other hospitals
around the world.[61][62]
Critics of Six Sigma believe that while Six Sigma methods may have translated fluidly in a
manufacturing setting, they would not have the same result in service-oriented businesses, such
as the health industry.[63]
Criticism
Lack of originality
Noted quality expert Joseph M. Juran has described Six Sigma as "a basic version of quality
improvement", stating that "there is nothing new there. It includes what we used to call
facilitators. They've adopted more flamboyant terms, like belts with different colors. I think that
concept has merit to set apart, to create specialists who can be very helpful. Again, that's not a
new idea. The American Society for Quality long ago established certificates, such as for
reliability engineers."[64]
Role of consultants
The use of "Black Belts" as itinerant change agents has (controversially) fostered an industry of
training and certification. Critics argue there is overselling of Six Sigma by too great a number of
consulting firms, many of which claim expertise in Six Sigma when they have only a
rudimentary understanding of the tools and techniques involved.[5]