elehvaet
ee or
WAN Port
‘when the WRT is used as an Reoess Point (AP) or repeater (W0S], the WAN port can easily be configured as =
normal LAN por.
‘Adding WAN Port to LAN Switch to use as an additional, normal LAN si
por
Note: Steps ere true for firmwares current as ofthe author date ofthis article. v2.4, post $P2 Firmwares. These
‘steps were cone wih buld 12307 (2008 05 17), widely regarded as stable. other rmuare bull of OD-WRT have
the same or very similar tase.
1. Open up the Web Interface to your DD-WAT Device
2. Set WAN Connection Type! to Dieabled.
5. Doin he Base Setun page, the option WAN Port appears, Check the box Assign wali Per te
4. Snve/Reboot
The WAN ar
row the sare asthe other LAN ports.
(Categories: Wen | Interfaces | Advanced tutorials