Professional Documents
Culture Documents
TDD-LTE Throughput Cal
TDD-LTE Throughput Cal
Downlink peak throughput Calculation --1) Actual calculation of no of bits available in DL excluding control channel & pilot/reference
signals = total 600 sub carriers = 600 * (14*5 subframes) = 42000 Resource elements in
5ms duration.
2) For reference/pilot channel = 12 * 5 =60 Resource elements (Excluding there in control
channels)
Therefore in 10 mhz bandwidth total no of total REs for Pilot = 60*50 = 3000 REs
3) For control channels = 72 * 50= 3600 REs (Considering only 6 symbols in 5ms frame)
4) Total REs in uplink sub frame = 168*50 = 8400 REs
Total REs in uplink sub frame = 168*46 = 7728 REs (168*4 = 672 RESs for PUCCH Channel)
12*46 = 552 REs for pilot/sounding reference signals in Uplink sub-frame.
Therefore REs used for Uplink data = 7728-552= 7176 REs
1) For UpPTS = 24*50 = 1200 REs but need to find out how many REs actually going to
be used for Uplink data.
2) Therefore total available REs for in uplink for data = 7176 REs
3) Total no of bits = 7176 * 6(64QAM) =43056 bits in 5ms.
4) Therefore throughput in a second =2 (Gain from Multi coe words) * ( 43056/5ms) = 2 *
(43056*1000/5 Seconds ) = 17222400 bits
5) Coding rate 0.855 = 17222400*0.855 = 14725152 = 14.72 Mbps