a
MARK ——
MARK TOOL & RUBBER CO, INC.
Sage
SPLASHTRON® POLYCHLOROPRENE COATING
‘SPLASHTRON@ is an anticorrosive system based on advance
polychloroprene technology. SPLASHTRON@ is a high density
elastomer having excellent resistance to weathering, fungus,
marine lfe and most ols. I consists of three layers that are
vulcanized tothe tee! pipe surface, te pipe is fist ste! grit
blasted
+ The first layer isa primer coat that provides the pipe steel
surface with a film tha is highly resistance to chemical
attack and to cathodic disbondment.
‘+ The second layer consists of an bonding agent thal works as a bonding layer between the SPLASHTRON® top coat
and the first layer of primer.
‘+ The third layer (op coat) consists of extruded SPLASHTRON® 500" thick or depending on the service conditions
the thickness could very. The function ofthe thir layer is to provide the system with both
anicorrosive and mechanical protection
Density
Weight Per Cu Ft
| Shore Durometer
| Tensite Strength
Uttiate Elongation
Volume Resistivity
Tear Resistance
Compression Set
‘ASTM D 412-0ae2
‘ASTM 0 412-0ae2
ASTM D-257
‘ASTM D624-00(2007)
ASTM D395-02 B
‘ASTM D 3389-10
BSI BS ISO 1817
‘ASTM D1269-01,
Taber Abrasion
‘Sea Water absorption
Specific Heat DSC
Peel Adhesion :
‘Temperature Limits
Ozone Resistance
Coefficient of Friction
Static
ASTM D 429-020
‘ASTM D 1894-99,
Coefficient of Friction
Dynamic
‘ASTM D 1894-99
‘Thermal Conductivity
Ee a
NA
giom?
Ibs
SHORE A
Psi
94.3
65
"2100
726
325% 10
193
20
am.
18
1.354
23.41
45 to 300 intermittent
PASS
1.58
161
19
‘These are typical results and ae Not to be used for quality contol,IY MARK TOOL & RUBBER CO, INC. a
a MAKING OUR MARK
‘SPLASHTRON@ is applied in our plant in Garden Cty, Louisiana (near Franklin), and in
California, to pipe of
practically any length in diameter (various manufacturing facilities have diferent
limitations). The most common coating thicknesses are 1, and 1", although itcan
be applied in almost any thickness. ee
We also manufacture "SPLASHTRON” sleeves which can be applied inthe field. The
sleeves are used where more than one joint of pipe fs needed for protection, as in a