Professional Documents
Culture Documents
Technical Specification of Transformers
Technical Specification of Transformers
1.
SCOPE:
The following Specification covers the supply of transformer required for the
proposed Project.
2.
GENERAL INFORMATION:
2.1
2.2
The design and workmanship shall be in accordance with the best engineering
practices to ensure satisfactory performance and service lift.
2.3
Transformers shall be suitable for the following ambient conditions:Design ambient temperature
Maximum humidity
.. 50 o C
.. 100%
3.
3.1
The transformers shall conform to the requirement of the latest revisions of the
following Codes & Standards.
IS:10028
:Installation and Maintenance of Transformers, Code of Practice
IS:2026(Part 1 to V) : Power Transformer
IS:3639 :
Power Transformers, fittings and accessories
IS:335/
:
Specification for new insulating oils for transformers
&switchgear
IS:12463
IS:2099 :
Bushings for alternating voltage above 1000V
IS:5 - 1951
:Colours for ready mixed paints and enamels
IS:648
:Non-oriented electrical steel sheets for magnetic circuits
IS:1866
:Code of practice for maintenance of insulating oil
IS:2166
:Guide for insulation co-ordination
IS:6600
:Guide for loading of oil-immersed transformers
3.2
Wherever Indian Standards are not available, the Transformer shall conform to
relevant International Standard.