Professional Documents
Culture Documents
P N M T: Install Manual (Windowsxp)
P N M T: Install Manual (Windowsxp)
030512
P
N
M
T
ASOLINK
ETWORK
Install Manual
(WindowsXP)
ANAGEMENT
ERMINAL
NEC Corporation
Copyright 2003
ROI-S04630
Table of Contents
1.
2.
3.
Dial-up Setting............................................................................................................................7
PNMT Setup..............................................................................................................................16
5.
-i-
ROI-S04630
1. Order of Installation
Notice
-Before installing PNMT, Installation of Internet Explorer 5.0 or more is required.
-Installation of Acrobat Reader is also required in order to see a help file.
Order of installation is described as below.
Step 1:
Phone and Modem Options Setting
Step 2:
Network and Dial-up Connection Setting
Step 3:
Pasolink Network
(PNMT) Setup
-1-
Management
Terminal
ROI-S04630
(2) Click on Phone and Modem Options icon to start configuring the modem.
-2-
ROI-S04630
(3) Select country and input area code on Location Information. Click on OK button to
continue.
-3-
ROI-S04630
(5) Select Modem tab, click on Add button to continue adding the new modem for
PNMT.
(6) Check on Dont detect my modem box and click on Next button to continue.
-4-
ROI-S04630
(7) Select Standard Modem Types and Standard 19200bps Modem from Manufacturer
and Models list respectively. Click on Next button to continue.
(8) Select Selected ports and COM1, then click on Next button to continue. If you are
using multi-port configuration, select All ports to install the standard 19200 bps
modem driver to all available COM ports.
-5-
ROI-S04630
(10) Verify that COM1 Standard 19200 bps Modem is displayed on the list. Click on OK
button.
-6-
ROI-S04630
3. Dial-up Setting
(1) Click on Start | Settings | Control Panel | Network Connections icon to start
configuring the Dialup setting.
(2) Network Connections is displayed. Click the Create a new connection in Network
Tasks category.
-7-
ROI-S04630
(4) Select option Connect to the network at my workplace and click on Next button to
continue.
-8-
ROI-S04630
(5) Select option Dial-up connection and click on Next button to continue.
(6) On the Network Connection Wizard window, type in pnmt on the input box. Click on
Next button to continue.
-9-
ROI-S04630
(7) Enter any number in the Phone number box. Click on Next button to continue.
(8) Verify that the connection pnmt has registered. You can also create a shortcut on
your desktop if you need. Click on Finish button.
- 10 -
ROI-S04630
(9) On the Connect Dial-up Connection window, click on Cancel button to continue.
Click Properties button on Connect Dial-up Connection window.
(10) On the Dial-up Connection Properties window, verify that selected device is ModemStandard 19200 bps Modem [COM1] on the General tab. Click on the Configure
button.
- 11 -
ROI-S04630
(12) On the Option tab, keep default setting and click on the Security tab.
- 12 -
ROI-S04630
(13) On the Security tab, keep default setting and click on the Networking tab.
(14) On the Networking tab, verify that Type of dial-up server I am calling is PPP and
uncheck File and Printer and Client for Microsoft.
- 13 -
ROI-S04630
(15) Click on Settings button. Uncheck all the boxes on the ensuing window just as
shown in figure below. Click OK to go back to previous window. Highlight Internet
Protocol (TCP/IP) then click on the properties box.
(16) Verify that both Obtain an IP address automatically and Obtain DNS server
address automatically are selected.
- 14 -
ROI-S04630
(17) On the Advanced TCP/IP Settings window, uncheck Use IP header compression in
the PPP link. Click OK button.
(18) On the Advanced tab, keep default setting and click OK button.
- 15 -
ROI-S04630
PNMT Setup
(1) Insert PNMT Installation CDROM. Open the CDROM folder and double-click on
setup.exe.
- 16 -
ROI-S04630
(3) Specify the directory where you want to install PNMT. Then click on Next button.
- 17 -
ROI-S04630
(5) A message window prompting the successful installation will appear when your
PNMT installation is complete. Click on Close button to close the PNMT
installation wizard.
- 18 -
ROI-S04630
5.
Launching PNMT
(1) Click on Start | Programs |PNMT |PNMT to start the application.
Admin
Password :
- 19 -