Professional Documents
Culture Documents
The Hitchhiker's Hack: I. (Functions (Private) )
The Hitchhiker's Hack: I. (Functions (Private) )
Summary:
I.
II.
III.
IV.
V.
I. [Functions (Private)]
These functions must be used on Private servers only
(Never use it on live server !)
Tracking: Allow you to track units on your minimap (like hunters) and to display ressources.
XYZ:
Activate XYZ: Allow you to teleport you character with the Numpad.
XYZ Speed: Teleport speed.
(Numpad)
7: Up
9: Down
8: Forward
5: Backward
6: Rigth
4: Left
Teleportation:
Map: Map ID of the map you are on.
Most used MapID:
X,Y,Z: Your coordinates.
0 = Eastern Kingdom (also named Azeroth in teleport list)
*: Copy current coordinates into the left columns
1 = Kalimdor
(Destination coordinates)
571 = Northrend
Teleport: Teleport you to the XYZ coordinates
530 = Outland, Quel Danas, Bloodelf spawn and Draene spawn
Go to corpse: Teleport you to your corpse.
List: Display the Teleport list.
Click to TP: Allow you to teleport your character where you click using the Right click + Shift or Ctrl or Alt (choose it in the Shortcut
window). You have to activate the ''Click to move'' option to make it work ! (Ingame: Escape -> Interface -> Mouse -> "Click to move").
Shortcuts:
They can be assigned by the Shotcut button (you have to check the Shortcut's checkbox to make them active). Only use ONE
unique shortcut per function.
XYZ:
Manual: One keypress move your character of a step.
Automatic: One keypress move your character continuously (To stop
moving, press the 1 key of the Numpad) /!\
(Numpad)
7: Up
9: Down
8: North
5: South
6: East
4: West
1: Stop moving (If you're in Automatic mod)
/!\ Please, disactivate XYZ when you want to type something. If you
press a Numpad key while you're typing, your character will be teleport
without turning, so you'll be disconnect if you move.
No-Clip Action: Teleport you a bit forward by pressing the shortcut key
(Default: F3).
(DONT USE IT CONTINUOUSLY ! Only on VERY short distance (to go
through a wall/door for example)))
Shortcuts:
They can be assigned by the Shotcut button (you have to check the Shortcut's checkbox to make them active). Only use ONE
unique shortcut per function.
III. [Player]
(Client-side only)
(Work on Live server)
Alcohol: Make you drunk !
Titre: Display a title before your pseudo. You need to Disactivate/Activate
your name in options to see it (Clientside only)
Emote on target: Play selected emote on your target (if no target is
selected, emote is play on you)
Reveal the map: Reveal all the map (Don't give any achievement and have
to be reactivate after any loading)
Scale:
Scale +: Make you character bigger (with collisions)
Scale -: Make you character smaller (with collisions)
Scale: Character's scale (without collisions)
Height: Heigth of your character (collision only)
Width: Width of your character (collision only)
Reset: Reset your original scale
Player:
Dead: Show your character dead (Clientside only)
Invisible: Make your character disapear (Clientside only)
Camera:
Spectate mod: Allow you to move your camera only (You can change the
speed with the inputbox (Default speed: 40))
No Clip: Allow you to go through everything with your camera in Spectate
mod.
Follow target: Allow you to put your camera on your target to follow her.
Use arrows to turn around the selected target.
TP Camera (Private serv.): Teleport you to your camera (Private servers
only !)
Time:
Hours: Set the hour of the game.
Minutes: Set the minutes of the game.
Speed: Set the time speed.
To add a destination: Put the name you want (must be unique in the list !) and click on ''Add TP''. Your destination will be add at the
end of the list, in the category "Destinations ajoutes manuellement".
To delete a destination: Put it number (Left column) and click on "Delete TP".
WEH list: If you check this option, you reverse the destination's axis (X and Y) because in WowEmuHacker's teleport list, X and Y axis
are reversed. If you want to use a WowEmuHacker's list, you'll have to check if this teleport list respects the conditions bellow:
The teleport list must be composed like that:
[Name of the destination]
Type:=Whatever you want (This line is only here to make the program compatible with WEH lists)
MapID:=ID of the map
Xpos:=X coordinate
Ypos:=Y coordinate
Zpos:=Z coordinate
Comment:=Comment.. ^^
You have to keep the same file's name and extension (.ini).
But as I said, you don't need to use this if you use the teleport list who's included with the program.
To teleport, you just have to click on a destination and then, click on ''Teleport''.
V. [Other]
On top: Put the window in the foreground.
Transparence: Make the window transparent.
Reset: Reset all the program's options.
"WoW List": If you launch several WoW, you'll be able to choose wich WoW you want to cheat on by selecting his PID (writed in the
top right hand column (on screenshots, 3 WoW are launched))
Settings: Allow you to change some settings:
language