3.- Keep holding "reset km" button, switch your car key to Position II, and start the engine. The two orange pointers will check them movements and in the dashboard will show the menu that appears in my video. 4.- Release (drop) the "reset kilometers" button and press to skip each sub-menu. CODES MEANING: 1. Gage: Testing arrows. 2. Lcd: LCD Test segment. 3. Bulb: checking lights (all of them ON). 4. R31: RAM version. 5. E001: NVRAM version. 6. dtc-xxxxxxxx: If there is some error, appears: "VMETO" 7. 000'0: Speed in MPH 8. 000`0: Speed in KMH 9. 005C : Outdoor temperature (Celsius) - Entry engine. 10. 800 : Speed engine in RPM. 11. 0.66T : MAP indications. 12. F082 13. Lo57: Percentage of fuel level. 14. 146.F 15. 050C: Engine temperature (Celsius). 16. 09EC: Engine temperature (hexadecimal). 17. B11.1: Voltage board network. 18. AB-L : Relay status. 19. EB-L: Relay status. 20. IL-L: Beam state relay. 21. IL-H: Relay status. 22. A-6C: 23. B-09 ( B-08) : Changing settlement if the motor is plugged. 24. C-C1 ( C-D1) : " 25. D-3B ( D-3C) 26. 0152: Tension control. C.a 27. 1049 : Daily kms. 28. 2171: Variable 1. 29. 3000 30. 4255: 31. 5000 32. 6000 33. 7000 34. p117: Errors diagnostic (Something related to voltage). 35. P2FF 36. P3FF 37. P4FF: Errors about empty. FF general shows ROM Empty.