Professional Documents
Culture Documents
Radio Parameter Reference
Radio Parameter Reference
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26771900
Fax: +86-755-26770801
URL: http://ensupport.zte.com.cn
E-mail: support@zte.com.cn
LEGAL INFORMATION
Copyright 2011 ZTE CORPORATION.
The contents of this document are protected by copyright laws and international treaties. Any reproduction or
distribution of this document or any portion of this document, in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited.
Revision History
Revision No.
Revision Date
Revision Reason
R1.4
20110728
Updated to V6.20.614d
Updated parameters in the chapter as follows:
1. Parameters in Functional Switch and Other Parameters of
Chapter Bsc Function Parameters
2. Parameters in Basic Parameters 2, Basic Parameters 3,
Other Parameters, GPRS Other Parameters 3 of Chapter
Cell Parameters
3. Parameters in Handover Control Parameters of Chapter Cell
Object Parameters
4. Parameters in Operation Control Parameters and Other
Parameters of Chapter System Control Parameters
R1.3
20110527
R1.2
20101210
Updated to V6.20.614c
R1.1
20101010
Updated to V6.20.614b
R1.0
20100720
First edition
Contents
About This Manual ......................................................................................... I
Chapter 1 Overview .................................................................................... 1-1
1.1 Introduction to BSS Radio Parameters................................................................. 1-1
1.2 Methods to Modify Radio Parameters .................................................................. 1-2
1.3 Method of Modifying Parameters in Batch ............................................................ 1-6
1.4 The Format to Explain Parameters .....................................................................1-11
1.5 Precautions on Parameter Adjustment............................................................... 1-13
III
IV
VIII
XI
XIV
XVI
4.12.20 Num of samples that calculates average of uplink signal level in NC2
(INFO1_6_15)......................................................................................4-246
4.12.21 Num of samples that calculates average of downlink signal level in
NC2 (INFO1_6_20) ..............................................................................4-247
4.12.22 Num of samples that calculates average of uplink quality level in NC2
(INFO1_6_25)......................................................................................4-248
4.12.23 Num of samples that calculates average of downlink quality level in
NC2 (INFO1_7_0)................................................................................4-249
4.12.24 Transform from uplink delay to extend (Info1_1_16).............................4-250
4.12.25 Max Num of resend packet assignment (Info1_1_8).............................4-251
4.12.26 Resource adjust for CS preempt (Info1_1_17) .....................................4-253
4.12.27 Subcell selection of PS channel allocation (PSALLOCSC_0) ................4-254
4.12.28 RXLEV threshold in subcell 1 (PSALLOCSC_1) ..................................4-256
4.12.29 RXLEV threshold in subcell 2 (PSALLOCSC_2) ..................................4-257
4.12.30 Multislot allocation of extended range cell support (Info1_7_13)............4-258
4.12.31 Info1_2 .............................................................................................4-259
4.12.32 Info1_3 .............................................................................................4-260
4.13 GPRS Cell Options Parameters......................................................................4-261
4.13.1 T3168 (T3168) ....................................................................................4-261
4.13.2 T3192 (T3192) ....................................................................................4-263
4.13.3 T3142 (Info1_0_2) ...............................................................................4-264
4.13.4 T3172 (Info1_0_3) ...............................................................................4-266
4.13.5 DRX mode holding timer (DrxTimeMax) ................................................4-267
4.13.6 MAX blocks transmittion in each TS (BsCvMax) ....................................4-268
4.13.7 Packet control acknowledgement type (CtraCKType).............................4-270
4.13.8 Access burst type (AccessType) ...........................................................4-271
4.13.9 N3102 descrease step (PanDec) ..........................................................4-272
4.13.10 N3102 increase step (PanInc) ............................................................4-274
4.13.11 N3102 max (PanMax) ........................................................................4-275
4.13.12 GPRS Phone Init Coding (GPRSInitattselt_0~GPRSInitattselt_3) .........4-277
4.13.13 GPRS phones init code can be changed (InitAttachExch_0) .................4-278
4.14 GPRS NC Survey Parameters........................................................................4-279
4.14.1 Packet idle mode (NcRepPerI) .............................................................4-279
4.14.2 Packet transmission mode (NcRerPerT) ...............................................4-280
4.14.3 Extended measurement report order (MeaOrder) ..................................4-281
4.14.4 Network control order (CtrlOrder)..........................................................4-282
4.14.5 NC hold time in non-drx mode (NcNoDrxPer) ........................................4-283
4.14.6 Extended measurement report order (ExMeaOrder) ..............................4-284
XVIII
XX
XXI
XXII
XXIII
6.2.8 The maximum control level for MSC overload or link block
(MSCFlcMaxLevel) ............................................................................... 6-53
6.2.9 The number of channel requests permitted per second (ChlReqNum)........ 6-54
6.2.10 The number of paging messages permitted per second (PagingNum)...... 6-55
6.3 Handover Parameters of BCCH ........................................................................ 6-56
6.3.1 Handover BCCH (CanBCCHEx).............................................................. 6-56
6.3.2 Scan BCCH (ScanBCCH) ....................................................................... 6-57
6.3.3 BCCH starting delay (BCCHDelay).......................................................... 6-58
6.3.4 BCCH finishing delay (ReBcchEx) ........................................................... 6-59
6.3.5 Delay of TRX forcible release (TrxRel) ..................................................... 6-60
6.3.6 The maximum cells' amount of simultaneously handover
(MaxChangeProc)................................................................................. 6-62
6.4 Handover Parameters of SD ............................................................................. 6-63
6.4.1 Dynamic configuration SDCCH (CanSDCCHDyn) .................................... 6-63
6.4.2 Scan SDCCH (ScanSDCCH) .................................................................. 6-64
6.4.3 Delay of TS forcible release (TsRel)......................................................... 6-65
6.4.4 Delay protection (MaxDelay) ................................................................... 6-66
6.4.5 TCH->SDCCH limit (MinSDCCH) ............................................................ 6-67
6.4.6 SDCCH->TCH delay (TimeToTch) ........................................................... 6-68
6.5 Other Parameters............................................................................................. 6-69
6.5.1 B2 support AMR (V2TruSupportAMR) ..................................................... 6-69
6.5.2 CHR enable (ChrEnable) ........................................................................ 6-70
6.5.3 Subcell busy threshold (Reslimit_3) ......................................................... 6-71
6.5.4 Abis alarm delay time (AbisAlmDelayTime) .............................................. 6-72
6.5.5 CHR Flow Control period (CHRFlowCtrlPeriod) ........................................ 6-72
6.5.6 Max msg num of CHR (CHRMaxMsgNum) .............................................. 6-74
6.5.7 NC2 support (NC2support) ..................................................................... 6-75
6.5.8 MR server IP (MRSvrIP) ......................................................................... 6-76
6.5.9 MR server port (MRSvrPort).................................................................... 6-76
6.5.10 Enable power dynamic sharing (PwrDynShareSupport_0)....................... 6-77
6.5.11 Reduction of TCH initial downlink power according to SDCCH enable
(PwrDynShareSupport_1)...................................................................... 6-78
6.5.12 Channel power adjustment based on power dynamic sharing enable
(PwrDynShareSupport_2)...................................................................... 6-79
6.5.13 Time interval of channel power adjustment based on power dynamic
sharing (ChannelPwrAdjItvl)................................................................... 6-80
6.5.14 BER Weight (VoiceQualWeight_0)......................................................... 6-81
6.5.15 FER Weight (VoiceQualWeight_1) ......................................................... 6-82
XXV
Figures............................................................................................................. I
Glossary ........................................................................................................ III
XXVIII
Audience
l
l
l
System Engineer
Commissioning Engineer
Maintenance Engineer
Summary
Chapter 1 Overview
Parameters
Chapter 3, External Cell
Parameters
cell parameters.
Parameters
Chapter 6, System Control
Parameters
Appendix A ~ C, Value Tables
Appendix D, Corresponding
Relationship between
II
Chapter 1
Overview
This chapter explains the definition and classification of radio parameters in GSM network,
modification methods of radio parameters, explanation format of radio parameters, and
precautions in radio parameters adjustment.
Table of Contents
Introduction to BSS Radio Parameters .......................................................................1-1
Methods to Modify Radio Parameters.........................................................................1-2
Method of Modifying Parameters in Batch ..................................................................1-6
The Format to Explain Parameters ...........................................................................1-11
Precautions on Parameter Adjustment .....................................................................1-13
determined during network design and are seldom changed during the operation of
the network.
2. Resource (cell) parameters
Resource (cell) parameters refer to parameters related to configuration and utilization
of radio resources, which usually transmit on radio interface (Um) to keep the base
station and mobile station consistent. Radio parameters covered in this manual are
mainly resource parameters. Radio resource parameters in BSS contain:
l
l
l
l
1-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
1-3
SJ-20100524164252-017|2011-07-28 (R1.4)
The tree in the left pane shows the objects to be created and maintained. User
can double-click the node whose parameters shall be modified, the corresponding
parameter interface occurs in right window.
6. Under initial case, the shortcut button Modify in configuration management toolbar
is inactivated, and parameters can not be modified. User must perform the operation
of "Apply Mutex Right" to enable the toolbutton.
Note:
The "Apply Mutex Right" function is to prevent multiple clients doing actions for the
data, which may cause data confused and errors.
Take the data modification of primary configuration set as an example, specific steps
as follows:
1-4
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
a. Right-click BSC Managed Element, and select Apply Mutex Right in the pop-up
menu, as shown in Figure 1-4.
Figure 1-4 Selecting Apply Mutex Right
b. Click Apply Mutex Right, and the Information dialog box appears, as shown in
Figure 1-5.
Figure 1-5 Information Dialog Box
c.
Click Yes, and the mutex right is successfully acquired, and the icon appears
on the configuration resource tree, as shown in Figure 1-6. Then, the toolbutton
is enabled, and you can modify the configuration data of this managed element.
Figure 1-6 Applying Mutex Right Successfully
d. After the data modification is completed, user should right-click on BSC Managed
Element and select Release Mutex Right in the pop-up menu, as shown in Figure
1-7. After the mutex right is released, other users can perform operations on the
configuration data of this managed element.
1-5
SJ-20100524164252-017|2011-07-28 (R1.4)
2. Click Export Network Plan Data, and the Choose MOC to be Exported dialog box
appears. Select the parameter list to be exported, and click Next, as shown in Figure
1-9.
1-6
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
3. In the Choose Attributes of Each MOC to be Exported (RDN Excluded) dialog box,
select attribute of the parameter list to be exported, and click OK. Here, suppose the
MOC selected is IBSCFUNCTION_TABLE, as shown in Figure 1-10.
Figure 1-10 Selecting Attributes to Be Exported for MOC
1-7
SJ-20100524164252-017|2011-07-28 (R1.4)
4. Select the file type to be exported, and click OK. Here, suppose the data is exported
to be an Excel file, as shown in Figure 1-11.
Figure 1-11 Selecting File Type to Be Exported
5. Set the saving path and file name for the exported data, and click Save, as shown in
Figure 1-12.
Figure 1-12 Setting Saving Path and File Name for Data
The data export progress bar is displayed, and then the system prompts that the data
is exported successfully.
6. Open the exported data file, as shown in Figure 1-13.
Figure 1-13 Parameter Data
7. Modify the data file according to actual requirement, and save it.
The operation indications are described as follows.
a. D indicates deleting the managed object (MO). A indicates adding the MO. M
indicates modifying the MO (this command is issued only when the parameter
value is changed). Any value beyond D, A, and M (including the lower case form)
1-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
will be ignored by the system, and the corresponding data in that row will not be
processed.
b. For the same MO (such as cell, cell power control and cell handover control),
if the operation type (D, A or M) appears in multiple exported tables, then the
operation types of all columns must be the same; otherwise, the system will give
error prompt.
c.
No matter how many records in the Excel table should be deleted, created or
modified, the system performs deletion first, then performs creation, and finally
performs modification.
Note:
The order of operations has nothing to do with the order of records being displayed
in the Excel file.
In the Excel template, the title row in the work sheet cannot be modified, the
frozen column cannot be modified, and the cell type cannot be modified. However,
common data columns and data rows can be deleted.
d. The parameter that cannot be modified on the interface cannot be modified in the
batch modification.
e. In the Excel template, the attributes USERLABEL, MCC, MNC, LAC and CI appear
in multiple work sheets, but only the modification in the network parameter list is
valid.
f.
8. In the configuration resource tree window, right-click OMC > GERAN Subnetwork ID
> BSC Managed Element ID > Config Set ID > BSC Function ID > Batch Apply
Network Plan Data, as shown in Figure 1-14.
1-9
SJ-20100524164252-017|2011-07-28 (R1.4)
9. Select the file type to be imported, and click OK, as shown in Figure 1-15.
Figure 1-15 Selecting File Type to Be Imported
10. In the Open dialog box, select the data file to be imported, and click Open.
11. In the Batch Network Plan Data Apply dialog box, select the object to which the data
is applied, and click OK, as shown in Figure 1-16.
1-10
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
The progress bar is displayed, and then the system prompts that the instruction is
executed successfully.
Note:
If the number of successfully executed instructions is 0, it indicates that no data needs
to be modified. If the number is not 0, it indicates that the data in the file is inconsistent
with that at the server.
Abbreviation
3GPP Name
3GPP Reference
Description
Managed Object
Value range and step of this parameter. If the parameter is in mapping form,
Step
Unit
Parameter unit
1-11
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Configuration Rule
The impact on the network performance and users feeling after this
and Adjustment
Suggestion
Change Mode
Related Features
parameter
Parameters which have data restriction relationship with the parameter.
For example, this parameter takes effect only after one or multiple relevant
parameters are enabled; this parameter's value has a restriction relationship
with one or multiple relevant parameters, such as larger than or smaller than
Related Parameters
Relationship
Related Interfaces
Impact on Equipment
Impact on service
service immediately.
1-12
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 1 Overview
Level 3: Modifying this parameter will bring an impact on all users in idle
and connection modes, and will cause the network service interrupted, and
restored for a period of time.
Negotiation With CN
Parameter Modifying
Version
Parameter Modifying
Detail
Note:
1. Radio parameters in this system is modified through offline modification mode, that is,
the modification on interface only can be effective after the synchronization action to
NE is conducted.
2. Some parameter values in the interface are not fully the same as those in database,
with certain corresponding relationship between them. For specific corresponding
relationship, refer to appendixes.
First is to solve static problem, that is, to correct traffic model in system design by
measuring actual average traffic and signaling flow in every district and to solve
common problems existing for long.
Second is to solve problems at a particular time like traffic overload in some district,
channel congestion due to sudden events or random events.
For the first type, service providers must perform measurement and summarization on
actual operation regularly, and then perform appropriate adjustment on global or partial
parameters and configurations. For the second type, network operators adjust some radio
parameters at real time according to instant data from measurement results.
Most radio parameters in GSM system are based on one cell or one location area. It is
necessary to consider whether parameter adjustment in this cell will influence other cells,
especially the adjacent one, for parameters between cells are related to each other greatly.
Otherwise, it may cause negative influence. Determine whether the problem results from
equipment fault (including connections) first when it occurs in some part of the network.
Adjust radio parameters only when determined that the problem does result from service.
1-13
SJ-20100524164252-017|2011-07-28 (R1.4)
1-14
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 2
DCS1800/PCS1900 support
Abbreviation
FuncExt
3GPP Name
None
3GPP Reference
None
This parameter indicates the supported frequency band. If you select
DCS1800, the DCS1800 frequency band will be supported. If you select
PCS1900, the PCS1900 frequency band will be supported. This param-
Description
Managed Object
BSC
2-1
SJ-20100524164252-017|2011-07-28 (R1.4)
DCS1800
Value Range and Step
PCS1900
Unit
None
Default Value
DCS1800
Default Value
Configuration Reason
You can set this parameter according to the actual frequency band
Adjustment Suggestion
planning.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadInd
3GPP Name
None
3GPP Reference
None
Load indication is a process in which adjacent BSCs can know the load
of the cells at the border so that more reference information can be
provided in normal handovers and intra-BSC handovers.
This parameter decides whether to enable load indication and whether
LoadValidTime and LoadIndPrd are valid. If the parameter is set to No
(load indication is disabled), LoadValidTime and LoadIndPrd are invalid.
Description
2-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
disabled.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ConfusionMsg
3GPP Name
None
3GPP Reference
None
A confusion message refers to a message that is sent by the SCCP to the
peer end when the SCCP receives a message at the local end but cannot
Description
Managed Object
BSC
2-3
SJ-20100524164252-017|2011-07-28 (R1.4)
0: No
Value Range and Step
1: Yes
Unit
None
Default Value
No
Default Value
Confusion messages are sent only in the connection stage. After the
Configuration Reason
BSC and the MSC are connected, such messages do not apply.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InHoEnable
3GPP Name
None
3GPP Reference
None
2-4
SJ-20100524164252-017|2011-07-28 (R1.4)
by the MSC.
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]HoInterEnable
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-5
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ExDRSendAssFail
3GPP Name
None
3GPP Reference
None
This parameter decides whether to send the assignment failure message
during external directed retries. If you select Yes, the assignment failure
message will be sent to the MSC when an external directed retry fails. If
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
No
Enabling this switch will increase the count of assignment failures
Default Value
Configuration Reason
because the MS will still attempt directed retries after the assignment
failure message is sent. Besides, some MSCs do not support the
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.
Enabling this switch will increase the count of assignment failures
because the MS will still attempt directed retries after the assignment
failure message is sent. Besides, some MSCs do not support the
sending of the assignment failure message during external directed
retries. The default value "No" can avoid affecting normal counting.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-6
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadValidTime
3GPP Name
Time indication IE
48.008 Mobile Switching Centre -Base Station System (MSC-BSC) inter-
3GPP Reference
face
In a load indication procedure, the BSC periodically sends a BSSAP
LOAD INDICATION message to the MSC, informing the MSC about the
load status. The BSSAP LOAD INDICATION message contains time
indication information, indicating the valid period of the service load. The
MSC forwards the load information to adjacent BSCs via BSSAP LOAD
INDICATION message.
the load information. 255The parameter value 255 means that the load
Description
Managed Object
BSC
0..255
Step: 1
Unit
10 s
Default Value
18
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
2-7
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadIndPrd
3GPP Name
None
3GPP Reference
None
In a load indication procedure, the BSC periodically sends a BSSAP
LOAD INDICATION message to the MSC, informing the MSC about the
load status. The BSSAP LOAD INDICATION message contains time
indication information, indicating the valid period of the service load. The
MSC forwards the load information to adjacent BSCs via BSSAP LOAD
INDICATION message. This parameter specifies the period for the BSC
Description
Managed Object
BSC
10..65530
Step: 1
Unit
100 ms
Default Value
1500
Default Value
Configuration Reason
Change Mode
Offline
2-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ResourceIndThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the rate of available channels, which is used
as a threshold for determining whether the BSC automatically sends a
resource indication message to the MSC. When the rate of available
channels in a cell is lower than this threshold, the BSC is required to
inform the MSC about the resource status in the cell by sending a
resource indication message. O&M is used to configure this parameter.
The four modes of resource indication from BSC are as follows:
Automatic mode: Upon receiving a BSSAP RESOURCE REQUEST
message, the BSC immediately responds with a BSSAP RESOURCE
INDICATION message containing no resource information. After that,
the BSC automatically sends a BSSAP RESOURCE INDICATION
message to the MSC when the condition of automatic response is met,
which may be a threshold or message interval preset by the O&M of the
BSC. Periodicity IE in the BSSAP RESOURCE REQUEST message
is used to indicate the interval between messages when the value of
Periodicity IE is not 0. Periodicity IE with a value of 0 will be neglected
Description
2-9
SJ-20100524164252-017|2011-07-28 (R1.4)
BSC
0..100
Step: 1
Unit
Default Value
30
Default Value
the BSC should report a resource indication to the MSC. The report of
Configuration Reason
value is, the more easily the automatic resource indication is triggered.
Adjustment Suggestion
The smaller the parameter value is, the more difficultly the automatic
resource indication is triggered.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
2-10
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ResourceAdjustThs
3GPP Name
None
3GPP Reference
None
During the processing of PS service, the Ranps instance performs
a handshaking with the Mac instance at a period of 5s. The user
plane judges whether resource adjustment is needed upon receiving a
handshaking request from the Ranps instance. This parameter indicates
the resource adjustment threshold, which is used in a decision algorithm
for determining whether to move group resources from single timeslot
to multiple timeslots.
The following describes the adjustment criteria:
When the sum of uplink and downlink traffic is less than this threshold,
no resource adjustment is needed.
When the uplink traffic is higher than the downlink traffic, perform
resource adjustment based on uplink priority.
When uplink traffic is lower than downlink traffic, and the difference
between downlink and uplink traffic is less than a quarter of the
threshold, perform the resource adjustment based on uplink priority.
In the other cases, perform the resource adjustment based on downlink
Description
priority.
Managed Object
BSC
200..50000
Step: 1
Unit
Byte
2-11
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
2000
Default Value
Configuration Reason
environment.
The larger the parameter value is, the more difficult the sum of uplink
and downlink traffic can reach this threshold, and therefore the less
likely the resource adjustment will be performed. Even the sum of uplink
and downlink traffic reaches the threshold, the difference between uplink
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
GB
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BscMaxResetNum
3GPP Name
None
3GPP Reference
None
2-12
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the maximum number of BSC resets. After the
BSC sends the BSSAP RESET message to the MSC, if the BSC does
not receive the BSSAP RESET ACKNOWLEDGE message from the
MSC in the specified time T4, the reset process will be repeated.
The BSSAP RESET message will be sent repeatedly at most N times. If
the BSC does not receive a response after N times, it will stop the reset
Description
Managed Object
BSC
1..255; step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MR report support
Abbreviation
MrRptEnable
3GPP Name
None
2-13
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter decides whether to enable the data report function and
use it along with MrRptTimap. If this function is enabled, measurement
data will be reported to the NMS. The function is used to store the measurement reports from NEs into the NMS for the purpose of analyzing MS
Description
users' behaviors.
Managed Object
BSC
Yes, No
Yes: Enable
No: Disable
Unit
None
Default Value
No
Default Value
Configuration Reason
When you enable the MR data collection function, you should enable
Adjustment Suggestion
this parameter.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
ABIS
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HBTSScanSiteNum
3GPP Name
None
2-14
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the number of S8001 sites in each scan. 0The
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
10
Default Value
Each CMP supports 256 sites at most. It is reasonable that the CMP
Configuration Reason
The higher the value is, the more heavily the CMP is loaded. The default
Adjustment Suggestion
value is recommended.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanBT
[BSC]HBTSScanCyc
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Range of Barang
Abbreviation
None
3GPP Name
None
3GPP Reference
None
2-15
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
PGSM (1..124)
EGSM (0..124, 975..1023)
DCS1800 (512..885)
GSM1900 (512..810)
GSM850 (128..251)
Unit
None
Default Value
0&&0
Default Value
Normal services can be ensured even if you set no frequency for the
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
ABIS
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-16
SJ-20100524164252-017|2011-07-28 (R1.4)
RIM support
Abbreviation
RIMSupport
3GPP Name
RIM
3GPP Reference
3GPP TS 48.018
This parameter is a switch to support RIM function.
The RIM function is used for fast cell reselection between two BSCs
(including BSC-RNC cell reselection). During an external Network
Assisted Cell Change (NACC), the BSC sends the system information
of the target cell to the MS in the source cell before the MS starts the
cell reselection. In this way, the MS can quickly get access to the target
cell because the time needed for receiving the system information of the
target cell is saved after the MS reselects the target cell.
The external NACC of the BSC needs to acquire the system information
of the cell outside the BSC through a RAN Information Management
(RIM) process between the SGSN and the BSC.
If the BSC supports the RIM function, an RIM process is triggered by
service to acquire, store, and update the system information of the
external cell. Accordingly, the BSC, which supports the RIM function,
shall provide the system information of a cell inside the BSC when
required by another BSC/RNC, and informs this BSC/RNC about the
Description
Managed Object
BSC
Yes/No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
2-17
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]RIMRetryTimes
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RIMRetryTimes
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of RIM retries. The maximum num-
Description
Managed Object
BSC
0..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]RIMSupport
Relationship
This parameter can be set only when the RIM function is enabled.
2-18
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSReselParam2
3GPP Name
None
3GPP Reference
None
This parameter indicates whether two sets of measurement and reselection parameters can be used at the same time in idle state and packet
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
TIVE Status
Related Parameters
None
Relationship
None
Related Interfaces
None
2-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_16
3GPP Name
None
3GPP Reference
None
This parameter decides whether the handover synchronization
information contains the synchronization indication bit and whether the
handover completion message contains the Mobile Time Difference unit
Description
Managed Object
None
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
2-20
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Switch of call release when TRAU frame synchronization has been lost
Abbreviation
Info_4_5
3GPP Name
3GPP Reference
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TuTrauSyn
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
2-21
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Functional Switch
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS handover support
Abbreviation
PSHoSupp
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-22
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
EnablePSHoIndi
3GPP Name
None
3GPP Reference
None
It determines whether PS Handover Indications is enabled during
Description
inter-BSS handover.
Managed Object
BSC
Yes, No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-23
SJ-20100524164252-017|2011-07-28 (R1.4)
Request SI/PSI
Abbreviation
EnableRequestPSI
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
Yes, No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GetUtranClass
3GPP Name
None
2-24
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
If an MS is handed over from a 3G network to a 2G network, it is possible
that the handover request does not carry the UtranClassmark of the
MS. Alternatively, the handover request carries the UtranClassmark
but the information is incorrect. In the case of handover from 2G to
3G in the future, the handover may fail due to incorrect information of
UtranClassmark.
If this switch is enabled, the BSC actively initiates a class request for
reporting the information of UtranClassmark to the MS after the UE is
Description
Managed Object
BSC
0: NO;
1: YES
Unit
None
Default Value
Default Value
Adding a class request flow will increase system load. Therefore, this
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
2-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Support EMLPP
Abbreviation
SupportEMLPP
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Value Range and Step
Unit
None
Default Value
Yes
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
DFCA support
Abbreviation
DFCASupport
2-26
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter determines whether to support the Dynamic Frequency
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LcsSuperVision
3GPP Name
None
2-27
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter is a timer used for supervising a location process.
Start: When the BSC sends a location request to the SMLC.
Stop: When a location acknowledgement message is received.
Description
Managed Object
BSC
100..1000
Step: 1
Unit
100 ms
Default Value
250
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LcsRadio
3GPP Name
None
3GPP Reference
None
2-28
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
10..100
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
value is, the longer the waiting time is after the MS sends a location
Adjustment Suggestion
waiting time.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LcsWaitInTraHO
3GPP Name
None
2-29
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter specifies the waiting time for the completion of an
intra-BSC handover.
Start: An intra-BSC handover is initiated during service location.
Stop: A handover complete message is received.
Description
Managed Object
BSC
20..100
Step: 1
Unit
100 ms
Default Value
60
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT9108
3GPP Name
None
2-30
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the timer T9108 that is not used currently and is
Description
Managed Object
BSC
20
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitMsg
3GPP Name
None
3GPP Reference
None
2-31
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
5..20
Step: 1
Unit
100 ms
Default Value
20
Default Value
Two seconds are long enough for the A interface to transmit signalling
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitRancsEst
3GPP Name
None
2-32
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the protection time to wait for a resource
request in the RANCS process. The RANCS process is a process to
handle CS services.
Start: The RANA module receives an external handover request and
asks the RANCS module for a channel.
Stop: A response is received from the RANCS module.
At expiry: The handover failure message will be sent to the A interface.
Description
Managed Object
BSC
10..100
Step: 1
Unit
100 ms
Default Value
100
Default Value
Generally, ten seconds are long enough for channel request, activation,
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-33
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TWaitRancsCleCom
3GPP Name
None
3GPP Reference
None
This parameter indicates the time to wait for the RANCS process to
respond to ClearCom in the RanAWorker process. The RanAWorker
process is the working process of the RANA module.
Start: The clear command is sent to the RANCS module.
Stop: A response is received from the RANCS module.
At expiry: The release will continue.
Description
Managed Object
BSC
10..30
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-34
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
CcmWaitTimer
3GPP Name
None
3GPP Reference
None
This parameter indicates a timer that is used when the BTS waits
for disconnection, connection, and deactivation in dynamic channel
switching.
Start: The CCM starts channel switching.
Stop: A response is received from the connecting module and the BTS.
At expiry: The message will be sent to the BTS again.
Description
Managed Object
BSC
45..55
Step: 1
Unit
100 ms
Default Value
45
Default Value
The default value 4.5 seconds are long enough for the Abis interface to
Configuration Reason
transmit signalling and for the BTS to carry out the disconnection.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-35
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
GetStaticParamTimer
3GPP Name
None
3GPP Reference
None
This is a statistical parameter that is used to regularly poll the UPU unit
under the CMP in the RancRrm process.
Start: The timer is set periodically after power on.
Stop: None.
At expiry: The RancRrm will query information about resource
occupation from the UPU unit.
Description
Managed Object
BSC
60..600
Step: 1
Unit
100 ms
Default Value
120
Default Value
The default value 12 seconds can avoid both slow processing and
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-36
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RmsT10
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for the start of directed retry. The
timer is started to wait for queuing, forced handover, and forced release
actions when the cell fails to assign an available channel. When the
timer expires, a directed retry process is initiated.
Start: The cell fails to assign an available channel.
Stop: An available channel resource is obtained after queuing, forced
handover, and forced release.
Description
Managed Object
BSC
50..150
Step: 1
Unit
100 ms
Default Value
60
Default Value
Six seconds are enough for the cell to complete the queuing, forced
Configuration Reason
Set the parameter value in consideration of the time needed for queuing
Adjustment Suggestion
preemption.
Change Mode
Offline
Related features
ZGB-03-01-002 Directed_Retry
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-37
SJ-20100524164252-017|2011-07-28 (R1.4)
TFO Enable
Abbreviation
TFOControl_0
3GPP Name
None
3GPP Reference
None
This parameter, used for TFO control, indicates whether TFO is enabled.
0: Disable; 1: Enable
When this switch is disabled, the other switches for TFO control are also
disabled. That is, when the value of TFOControl_0 is 0, the values of
TFOControl_1, TFOControl_2 and TFOControl_3 are 0 too.
TFO is a in-band protocol that is used by the TCs of both parties for
encoding/decoding negotiation after the setup of a call. To improve the
speech quality, the voice frames in the air interface are directly sent
to the receiving party with the decoder of the sending party and the
encoder of the receiving party bypassed.
If two cells do not support AMR version, a TFO call can be successfully
set up between them once they support the same voice version. If two
cells support AMR version, a TFO call can be successfully set up only
when they use the same voice encoding/decoding type too. If different
voice encoding/decoding types are used, the setup of a TFO call will fail.
In the case of IPA, the CN is responsible for the negotiation of voice
Description
encoding.
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-006 TFO
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
2-38
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config set
ID->BSC Function->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TFOControl_2
3GPP Name
None
3GPP Reference
None
This parameter, used for TFO control, indicates whether the optimization
of voice encoding/decoding type is enabled.
0: Disable; 1: Enable
When this switch is enabled, the common optimal voice
encoding/decoding type and configuration can be found and used to
achieve a better voice quality after a TFO call is set up between two
Description
parties.
Managed Object
BSC
Yes/No
Unit
Null
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-006 TFO
Related Parameters
[BSC]TFOControl_0
Relationship
Related Interfaces
Null
Impact on Equipment
Impact on service
2-39
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config set
ID->BSC Function->Others
Parameter Modifying
Version
Null
Parameter Modifying
Detail
Null
Abbreviation
TFOControl_1
3GPP Name
None
3GPP Reference
None
This parameter, used for TFO control, indicates whether the mismatch
solution of encoding/decoding type is enabled.
0: Disable; 1: Enable
A TFO call cannot be immediately set up in the case of the mismatch
of voice encoding/decoding type. If this switch is enabled, the
encoding/decoding type of one party can be changed to solve the type
Description
mismatch problem.
Managed Object
BSC
Yes/No
Unit
Null
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-006 TFO
Related Parameters
[BSC]TFOControl_0
Relationship
Related Interfaces
Null
Impact on Equipment
Impact on service
2-40
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config set
ID->BSC Function->Others
Parameter Modifying
Version
Null
Parameter Modifying
Detail
Null
Abbreviation
TFOControl_3
3GPP Name
None
3GPP Reference
None
This parameter, used for TFO control, indicates whether the AMR
optimization mode is enabled. When two parties supporting AMR voice
use different ACS, the ACS of one party can be changed for successful
Description
Managed Object
BSC
0: ACS change not supported;
Unit
Null
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-006 TFO
Related Parameters
[BSC]TFOControl_0
Relationship
Related Interfaces
Null
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-41
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
Null
Parameter Modifying
Detail
Null
Abbreviation
Info_0_0
3GPP Name
None
3GPP Reference
None
This parameter decides whether to include the load information of a cell
into the information element "Old BSS to New BSS Information" when the
services of the cell under the current BSC are handed over to a cell under
Description
another BSC.
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-42
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the validity period of a neighbor cell's load infor-
Description
mation.
Managed Object
BSC
1..255
Step: 1
Unit
10 s
Default Value
Default Value
Configuration Reason
is too large, the neighbor cell deems that the load information has a
long validity period, which cannot reflect the actual load information in
time. If the parameter value is too small, the load information will be
reported frequently.
Change Mode
Offline
Related features
Related Parameters
[BSC]Info_0_0
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_0
3GPP Name
None
3GPP Reference
None
This parameter decides whether to process the Location Measurement
Unit (LMU) establishment request.
No: Not to process
Description
Yes: To process
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-44
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Info_1_1
3GPP Name
None
3GPP Reference
None
This parameter decides whether to process the Multimedia Broad-
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-45
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_1_2
3GPP Name
None
3GPP Reference
None
This parameter decides whether to process the reserved field Channel
Request. When this switch is enabled, if Random Access Reference in
the Channel Request message is 0x61, 0x63, or 0x65, the system will
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_0_9
3GPP Name
None
3GPP Reference
None
This parameter decides whether to support MS power optimization for
non-rescue handovers. Generally, when the handover command is issued to an MS, the MS is required to use the maximum transmit power.
However, this will result in strong interferences. This switch is designed
to reduce the interferences when multiple MSs are handed over with the
maximum transmit power. When enabled, the switch serves as a threshold. When the BSC sends a handover command to the MS for a non-rescue handover, such as PBGT handover, if the current level is higher than
the threshold, it means that the target cell has better signal quality. In this
case, the current transmit power, instead of the maximum transmit power,
Description
should be used.
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-47
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_0_10
3GPP Name
None
3GPP Reference
None
This parameter is valid when the MS power optimization for non-rescue
handovers is enabled. When the BSC sends a handover command to the
MS for a non-rescue handover, such as PBGT handover, if the current
level is higher than the threshold, it means that the target cell has better signal quality. In this case, the current transmit power, instead of the
Description
Managed Object
BSC
0 ..63, step: 1
0: < -110 dBm
1: -110 dBm..-109 dBm
2: -109 dBm..-108 dBm
...
62: -49 dBm..-48 dBm
Unit
None
Default Value
27
Default Value
Configuration Reason
the less likely the signals in the target cell are to reach the threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IurgSupport
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to support the Iur-g interface. 0: No;
1: Yes
0: Disable
Description
1: enable
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-49
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NRTThs_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the overload threshold of non-real-time services.
When the load of non-real-time services is equal to or higher than the
threshold, it is regarded that the scell is overloaded with non-real-time
services. Non-real-time services refer to PS services. The load is calculated by dividing the number of occupied PDCHs (including dynamic
Description
Managed Object
BSC
1..99
Step: 1
Unit
Default Value
90
Default Value
Configuration Reason
The higher the value is, the more likely the cell will be to be selected by
the RNC as the target cell for re-direction.
NRTThs_0>NRTThs_1>NRTThs_2
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
Negotiation With CN
NO
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NRTThs_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the upper overload threshold of non-real-time
services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_0, it is regarded that the cell
is overloaded with non-real-time services. Non-real-time services refer to
PS services. The load is calculated by dividing the number of occupied
PDCHs (including dynamic PDCHs and static PDCHs) by the number of
Description
available PDCHs.
Managed Object
BSC
1..99
Step: 1
Unit
Default Value
60
Default Value
Configuration Reason
The higher the value is, the more likely the cell will be to be selected by
the RNC as the target cell for re-direction.
NRTThs_0>NRTThs_1>NRTThs_2
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-51
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NRTThs_2
3GPP Name
None
3GPP Reference
None
This parameter indicates the lower overload threshold of non-real-time
services. When the load of non-real-time services is equal to or higher
than the threshold but lower than NRTThs_1, it is regarded that the cell
is moderately loaded with non-real-time services. Otherwise, the load of
non-real-time services is regarded low. Non-real-time services refer to
PS services. The load is calculated by dividing the number of occupied
PDCHs (including dynamic PDCHs and static PDCHs) by the number of
Description
available PDCHs.
Managed Object
BSC
1..99
Unit
Default Value
20
Default Value
Generally, it is regarded that the cell load is low if less than 20% of radio
Configuration Reason
The higher the value is, the more likely the cell will be to be selected by
the RNC as the target cell for re-direction.
NRTThs_0>NRTThs_1>NRTThs_2
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
0
2-52
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config SetBSC
Function->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IurgSwitchGroup_0
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable On Demand mode of information exchange. Information exchange refers to the process in which
the RNC and the BSC exchange the capacity information of radio cell
resources. On Demand is a mode in which the information is reported
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
0
2-53
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IurgSwitchGroup_1
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable On Modification mode of information exchange. Information exchange refers to the process in which
the RNC and the BSC exchange the capacity information of radio cell resources. On Modification is a mode in which the information is reported
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
0
2-54
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IurgSwitchGroup_2
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable On Demand mode of common
measurement. Common measurement refers to the process in which the
RNC and the BSC exchange the occupation information of radio cell resources. On Demand is a mode in which the information is reported im-
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
0
2-55
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IurgSwitchGroup_3
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable Periodic mode of common
measurement. Common measurement refers to the process in which the
RNC and the BSC exchange the occupation information of radio cell resources. Periodic is a mode in which the information is reported periodi-
Description
cally.
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]IurgSupport
Relationship
Related Interfaces
Iur-g
Impact on Equipment
Impact on service
0
2-56
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Others
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ImmAssRep
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to re-send the immediate assignment
message. If it is set to 0, the message will not be re-sent. If it is set to 1,
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
immediate assignments.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-57
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ImmAssPrio
3GPP Name
None
3GPP Reference
None
This parameter indicates the priority of the immediate assignment message. The value range is 0 and 1. The value 1 stands for high priority
at which any PCH block can be preempted. Currently, this parameter is
Description
Managed Object
BSC
0: Low, indicating low priority
Unit
None
Default Value
High
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PagRep
3GPP Name
None
3GPP Reference
None
This parameter indicates how many times a paging message will be
Description
Managed Object
BSC
0..4
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
case, however, the load of the paging channel will increase, so you
Adjustment Suggestion
should consider both the load of the paging channel and the success
rate of the paging when setting this parameter.
Change Mode
Offline
Related features
ZGB-02-01-001 Paging
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-59
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
2.3.33 Info_3
Full Name
Info_3
Abbreviation
Info_3
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
2-60
SJ-20100524164252-017|2011-07-28 (R1.4)
2.3.34 Info_6
Full Name
Info_6
Abbreviation
Info_6
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
2.3.35 Info_7
Full Name
Info_7
Abbreviation
Info_7
3GPP Name
None
3GPP Reference
None
2-61
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
DynaHREnable
3GPP Name
None
3GPP Reference
None
2-62
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter decides whether the BSC supports dynamic HR. The dynamic HR channel allocation function enables the network to allocate
full-rate or half-rate channels to MSs according to the traffic in the cell
when it allocate channels for the MSs. Allocating half-rate channels when
the channels in the cell are likely to be congested minimizes the duration
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
switch is enabled.
Change Mode
Offline
Related features
Related Parameters
[Cell]DynaHREnable
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Threshold for FR to HR
Abbreviation
HRThs
3GPP Name
None
2-63
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
When the proportion of the occupied channels exceeds this threshold,
half-rate channels will be requested directly to increase the user capacity. The formula is as follows: (occupied TCH/F channels + occupied
TCH/H channels / 2 + unblocked static PD channels + busy dynamic PD
channels) / (available TCH/F channels + available TCH/H channels / 2 +
available dynamic and static PD channels (all channels are current-status
Description
channels.))
Managed Object
BSC
1..100
Step: 1
Unit
Default Value
60
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrHRThs
[Cell]HRThs
HRThs is not less than AmrHRThs. If the parameter UseCellDynHRPara
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-64
SJ-20100524164252-017|2011-07-28 (R1.4)
Threshold of AMR HR
Abbreviation
AmrHRThs
3GPP Name
None
3GPP Reference
None
When the result of the busy timeslots divided by the total timeslots is not
less than that of AmrHRThs divided by 100 (The busy timeslots include
occupied TCH/F channels, occupied TCH/H/2 channels, available PD
channels, and congested PD channels. The total timeslots include
available TCH/F channels, TCH/H/2 channels, and PD channels.) and
when carriers and cells support AMR, the services that access the
system will use AMR speech rate as a priority.
This threshold value can be configured on BSCs and BTSs. When
UseCellDynHRPara is set to "Yes", the AmrHRThs value configured
for cells will be used. Otherwise, the AmrHRThs value configured for
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
50
Default Value
Configuration Reason
The dynamic AMR shift can be carried out as a priority only when the
threshold value is lower than that of the dynamic HR. Therefore, the
default value is set to 50.
You can increase the AMRHR channels allocated to the cell by setting
this parameter to a lower value, or reduce the AMRHR channels by
Adjustment Suggestion
Change Mode
Offline
ZGO-03-02-006 Independent Threshold for Dynamic AMR HR/FR Con-
Related features
version
Related Parameters
[BSC]HRThs
[Cell]AmrHRThs
HRThs is not less than AmrHRThs. If the parameter UseCellDynHRPara
Relationship
Related Interfaces
None
2-65
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HRDfragSupport
3GPP Name
None
3GPP Reference
None
This parameter is a switch to support the HR channel defragmentation
function and can be configured on both BSCs and cells. The HR channel
defragmentation function is enabled only when both BSC- and cell-level
switches are enabled and the proportion of the idle TCH/Fs in these cells is
not more than the threshold proportion of the TCH/Fs to the total available
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-03-02-004 HR Concentration
2-66
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]HoIntraEnable
[Cell]HRDfragSupport
Relationship
This function can be enabled only when HoIntraEnable and BSC- and
cell-level HRDfragSupport in the system control parameters are enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HRTsPercentage
3GPP Name
None
3GPP Reference
None
When the ratio of number of HR occupied times slots to the number of
all the service time slots is lower than this threshold, a new HR channel
can be generated. The occupied HR time slots include static HR time
slots and dynamically generated HR time slots.
The parameter can be configured on BSC and BTS. when
UseCellDynHRPara is set to "Yes", HRTsPercentage is used. When
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
50
Default Value
The default start threshold for dynamic HR exceeds 50%. Too many HR
Configuration Reason
2-67
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PriThreshold
3GPP Name
None
3GPP Reference
None
When you enable the eMLPP service function, which allows high-priority
users to access channels first, the system can reserve a certain number
of channels for high-priority users (currently, only full-rate TCHs can be
reserved channels)
When the CS instance invokes the database to request channels,
the user's PriorityLevel information will be sent to the database and
compared with the value of PriThreshold in the BSC table. If PriorityLevel
is not more than PriThreshold (That is to say, the priority of the user is
not lower than PriThreshold. The lower the priority value is, the higher
Description
Managed Object
BSC
1..15
Step: 1
2-68
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 Emlpp
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreferSpeechVer H
3GPP Name
None
3GPP Reference
None
This parameter indicates the preferred half-rate speech version in the CS
channel allocation. Half rate version1 refers to HR and version3 refers to
Description
AMR.
Managed Object
BSC
0: No preferred version.
1: Half rate version1.
Unit
None
2-69
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
0: No preferred version.
Default Value
Configuration Reason
version.
Generally, AMR enables the adaptive switching of coding rates. In
poor channel conditions, increasing the channel coding rate (increasing
redundant bits) and reducing the source (speech) coding rate can
ensure the conversation quality. In good channel conditions, increasing
the source coding rate can improve the voice quality.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreferSpeechVer F
3GPP Name
None
3GPP Reference
None
This parameter indicates the preferred full-rate speech version in the CS
channel allocation. Full rate version1 refers to FR. Full rate version2 refers
Description
Managed Object
BSC
2-70
SJ-20100524164252-017|2011-07-28 (R1.4)
0: No preferred version.
1: Full rate version1.
2: Full rate version2.
Value Range and Step
Unit
None
Default Value
0: No preferred version.
Default Value
Configuration Reason
Generally, ERF can provide the best voice quality and user satisfaction.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RsvChanFirst
2-71
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the order of preference of reserved and
non-reserved channels. If this functional switch is enabled, reserved
channels will be allocated to high-priority users first.
Yes: To allocate reserved channels first
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Default Value
Generally, reserved channels are used first to avoid the waste of channel
Configuration Reason
resources.
Change Mode
Offline
Related features
ZGO-01-03-001 Emlpp
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EMLPPThs
3GPP Name
None
2-72
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter decides the proportion of channels reserved for high-priority users when you enable the eMLPP service function, which allows
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
Default Value
Configuration Reason
this case, high-priority users are more likely to access a channel, but
low-priority users have fewer available channels.
The lower the value is set to, the fewer channels will be reserved. In this
case, high-priority users are less likely to access a channel.
Change Mode
Offline
Related features
ZGO-01-03-001 Emlpp
Related Parameters
[Cell]EMLPPThs
If the parameter UseCelleMLPPThs is enabled, the cell-level parameter
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TrxPSBusyThs
2-73
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TrxPSBusyThs
3GPP Name
None
3GPP Reference
None
The degree of idleness of the PS service channels on a carrier is
calculated as follows:
If there are available uplink and downlink PS service channels on the
carrier, and if the number of available uplink channels is byUpNum and
the number of available downlink channels is byDwNum,
Total degree of idleness of all available uplink PS service channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
In this formula, the degrees of idleness of byUpNum uplink channels
are accumulated.
Total degree of idleness of all available downlink PS service channels =
100*(Abis/AbisMax)*(Qos/16)*((Usermax-Usernum)/Usermax)
In this formula, the degrees of idleness of byDwNum downlink
channels are accumulated.
Where,
Abis is the number of Abis resources (IP Abis bandwidth or E1 Abis
timeslot) allocated to the channels.
AbisMax is the maximum number of Abis resources (IP Abis bandwidth
or E1 Abis timeslot) that can be allocated to the channels. For example,
at most four E1 Abis timeslots can be allocated to a PS service channel
on the EDGE carrier. 4
QoS is the number of available QoS quotas on the channels (the original
number is 16.)
Usermax is the maximum allowable number of users whose data is
multiplexed on the channels.
Usernum is the number of users on the current channel.
The degree of idleness of the carriers (TrxIdle, ranging from 0 to 100) is
calculated as follows:
If byUpNum == 0 and byDwNum != 0, TrxIdle = Total degree of idleness
of all available downlink PS service channels / byDwNum
If byUpNum != 0 and byDwNum == 0, TrxIdle = Total degree of idleness
of all available uplink PS service channels / byUpNum
If byUpNum != 0 and byDwNum != 0, TrxIdle = (Total degree of idleness
of all available downlink PS service channels * byDwNum + Total degree
of idleness of all available uplink PS service channels * byUpNum) / (2
* byDwNum * byUpNum)
If byUpNum == 0 and byDwNum == 0, TrxIdle = 0 (This is because there
are no available uplink or downlink PS service channels on the carriers. )
TRX controlled only by the degree of idleness of PS service channels is
selected according to the following principles:
If there are idle PS service channels on all TRXs, one TRX will be
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
the PS service channels on the TRX is higher than the threshold, the
same TRX is always selected as a priority for the purpose of centralized
service allocation.
When the degree of idleness of the PS service channels on the TRX is
lower than the threshold, it is deemed that the TRX is overloaded with
PS services and an inter-TRX balance is required. In this case, another
idle TRX will be selected and new PS services will be allocated to the
TRX until it is overloaded.
3When all TRXs are overloaded with PS services, the TRX with higher
degree of idleness of PS service channels will be selected for the
purpose of inter-TRX balance of PS services.
Managed Object
BSC
1..100
Step: 1
Unit
Default Value
50
When the default value is set to 50, PFC users occupy half channel Qos.
Default Value
For non-PFC users, the number of current users on the channels is half
Configuration Reason
required for PS services, you can set this parameter to a lower value to
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-75
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PsAbisThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the upper limit of the rate of the Abis resources
that can be allocated to PS services in the full-dynamic Abis resource
pool. If this threshold value is exceeded, no Abis resources will be
allocated to PS services even when there are available Abis resources.
Rate of occupied PSABIS resources = Abis resources allocated to PS
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-76
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ExUpDynSupport
3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the cell supports extended uplink dynamic allocation. When this function is used, the MS can decide whether
to send uplink blocks in all of the allocated uplink timeslots by only mon-
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The default value is set according to the traffic model and resource
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]ExUpDynSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-77
SJ-20100524164252-017|2011-07-28 (R1.4)
2.5 Timer 1
2.5.1 Blocking/Unblocking period (T1)
Full Name
Blocking/Unblocking period
Abbreviation
T1
3GPP Name
T1
3GPP Reference
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
2-78
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T4
3GPP Name
T4
3GPP Reference
Description
Managed Object
BSC
60..150
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
0
2-79
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T13
3GPP Name
T13
3GPP Reference
Description
At expiry: The BSS sends a BSSAP RESET ACK message to the MSC.
Managed Object
BSC
30..60
Step: 1
Unit
100 ms
Default Value
40
Default Value
Generally, the BSC can receive a message from the SCCP in four
Configuration Reason
seconds.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
0
2-80
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T19
3GPP Name
T19
3GPP Reference
Description
to the O&M, and then terminates the process and clears the instance.
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
2-81
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T20
3GPP Name
T20
3GPP Reference
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T9101
3GPP Name
None
3GPP Reference
None
2-83
SJ-20100524164252-017|2011-07-28 (R1.4)
connection.
Managed Object
BSC
20..50
Step: 1
Unit
100 ms
Default Value
20
Default Value
Generally, the BSC can receive a message from the MSC in two
Configuration Reason
seconds.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT9103
3GPP Name
None
3GPP Reference
None
2-84
SJ-20100524164252-017|2011-07-28 (R1.4)
the BTS.
Managed Object
BSC
20
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T9104
3GPP Name
None
2-85
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter is timer T9104, which is used to supervise the CLEAR
COMMAND sent from the MSC.
Start: When the BSC sends a CLEAR REQUEST message to the MSC.
Stop: When a CLEAR COMMAND message is received from the MSC.
At expiry: The BSC sends the CLEAR REQUEST again. The number of
Description
times that the CLEAR REQUEST message is sent cannot exceed four.
Managed Object
BSC
20..50
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T9105
3GPP Name
None
2-86
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter is timer T9105, which is used to supervise the SCCP
connection process.
Start: When the BSC sends a SCCP CONNECTION REQ message
to the MSC.
Stop: When the BSC receives a SCCP CONNECTION CONFIRM or
SCCP CONNECTION REFUSED message from the BTS.
Description
Managed Object
BSC
20..60
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT1
2-87
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter is timer RmsT1, which specifies the protection time used
to wait for the access of the MS after the channel activation in the case
of assignment or handover.
Start: When the target channel sends a RADIO AVAILABLE message to
the source channel after receiving the CHL ACITIVATION ACK message.
Stop: The target channel receives an ASSIGNMENT COM or
HANDOVER COM message after the MS is accessed.
Description
Managed Object
BSC
0..1000
Step: 1
Unit
100 ms
Default Value
70
Default Value
Configuration Reason
Adjustment Suggestion
Offline
Related features
None
Related Parameters
[BSC]rmsT3107
[BSC]rmsT3103
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-88
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RmsT2
3GPP Name
None
3GPP Reference
None
This parameter is timer T2, which indicates the protection time for TCH
application when an assignment request is received from the A interface
or an intra-cell handover is initiated.
Start: An assignment request is received from the A interface or an
intra-cell handover is initiated.
Stop: The TCH activation succeeds. The TCH activation fails. Or the
TCH request is placed on the queue after request failure.
At expiry:
An assignment failure message is sent to the MSC in the case of
assignment request.
The service is shifted back to the source channel in the case of handover
Description
request.
Managed Object
BSC
20..50
Step: 1
Unit
100 ms
Default Value
40
Default Value
Configuration Reason
four seconds.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-89
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3
3GPP Name
None
3GPP Reference
None
This parameter is timer T3, which indicates the protection time for an
A interface link establishment response in an immediate assignment
process.
Start: The BSC sends an ESTABLISH IND message for immediate
assignment.
Stop: The BSC receives an A interface link establishment
acknowledgement message.
Description
Managed Object
BSC
30..100
Step: 1
Unit
100 ms
Default Value
60
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-90
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT4
3GPP Name
None
3GPP Reference
None
This parameter is timer T4, which indicates the protection time for the
OMP to acknowledge the HO COM or ASS COM message.
Start: The BSC receives an HO COM or ASS COM message from the
MS.
Stop: The BSC receives an acknowledgement on the HO COM or ASS
COM message.
Description
Managed Object
BSC
10..80
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
2-91
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT5
3GPP Name
None
3GPP Reference
None
This parameter is timer T5, which is used to supervise the cipher mode
modify process, that is, wait for a response from the MS after the radio
cipher mode is set.
Start: When the BSC receives a CIPHER MODE COMMAND message
from the MSC.
Stop: When the BSC receives a CIPHER MODE COMPLETE message
from the MS.
At expiry: A BSSAP CIPHER MODE REJECT message is sent to the
Description
MSC.
Managed Object
BSC
30..120
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
2-92
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT6
3GPP Name
None
3GPP Reference
None
This parameter is timer T6, which is used to supervise the establishment
of SAPI3 link.
Start: When the BSC receives a DTAP (SAPI=3) message from the
MSC, and no SAPI3 link exists.
Stop: When the BSC receives a ESTABLISH CONFIRM message from
the BTS.
Description
Managed Object
BSC
10..300
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
2-93
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT8
3GPP Name
None
3GPP Reference
None
This parameter is timer RmsT8, which is used to supervise the external
handover process.
Start: When the BSC sends an external handover command.
Stop: When the BSC receives an HO COMCLEAR CMD (handover
success) or UM HO FAIL (handover failure) message.
Description
Managed Object
BSC
1..1000
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
2-94
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3
3GPP Name
None
3GPP Reference
None
This parameter is timer T3, which specifies a delay to avoid improper
actions caused by transient interruption of signallings.
A global reset is initiated when the interruption time of SS7 signallings
exceeds the protection time specified by timer T3. The SS7 signalling
link is deemed as broken if no signalling point reachable event is
received in the delay duration, and a global reset is initiated. If the
signalling point reachable event is received in the delay duration, it is
deemed that transient interruption of the SS7 link occurs.
Start: The periodic detection of MSC office status is interrupted. Or an
MSC/SLMC/iTC reset message is received.
Stop: An MSC reachable message is received from the MSC.
At expiry: If the opposite office is unreachable, clear the opposite office
block field and the opposite office un-equipped field, and send an MSC
Description
Managed Object
BSC
10..200
Step: 1
2-95
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
100 ms
Default Value
100
Generally, it is deemed that a transient interruption of SS7 signalling
Default Value
link occurs when the failed SS7 signalling link restores in 10 seconds.
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
sage
Abbreviation
RmsT7
3GPP Name
T7
3GPP Reference
Description
At expiry: Impose penalty to the external cell and terminate the process.
2-96
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
50..200
Step: 1
Unit
100 ms
Default Value
150
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HBTSScanBT
3GPP Name
None
3GPP Reference
None
Description
This parameter indicates the starting time of the S8001 frequency scan.
Managed Object
BSC
0..23
Step: 1
Unit
None
2-97
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Generally, the traffic is small at three o'clock in the morning, when the
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HBTSScanCyc
3GPP Name
None
3GPP Reference
None
This parameter indicates the period of the S8001 frequency scan.
Start: A new periodic frequency calibration message is received and a
calibration is started.
Description
Managed Object
BSC
1..255
Step: 1
Unit
3600s
2-98
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
24
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TBWPushDown
3GPP Name
None
3GPP Reference
None
This parameter is a protection timer for decreasing bandwidth of some
channels when the bandwidth resources are not enough. If the time since
the previous bandwidth decreasing is shorter than the time specified by
Description
Managed Object
BSC
1..10
Step: 1
Unit
2-99
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
5
The default value is set to avoid frequent decreasing of bandwidth. Five
seconds are appropriate because the bandwidth is reported for five
times in this period.
The default value is recommended.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TBWRestore
3GPP Name
None
3GPP Reference
None
This parameter is a timer for increasing the bandwidth of some channels
whose bandwidth used to be decreased when the bandwidth resource
is enough. This timer should be set when the measured bandwidth is
Description
Managed Object
BSC
2-100
SJ-20100524164252-017|2011-07-28 (R1.4)
1..10
Value Range and Step
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitInternalHoCmd
3GPP Name
None
3GPP Reference
None
2-101
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
1..100
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
The default value is set to 20 because two seconds are enough for
signalling transfer at the A interface and signalling processing in the
MSC.
Generally, the default value is recommended. The waiting time can be
appropriately prolonged if the timer expires when waiting for the internal
handover command.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-102
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TWaitLocalSwitch
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for a local switch setup
acknowledgement from the base station.
Start: A local switch setup request is sent to the base station.
Stop: A local switch setup acknowledgement is received from the base
station.
At expiry: In the case of local switch setup phase, a local switch setup
failure message is responded to the local switch management module.
In the case of local switch stop suspend phase, a local switch suspend
failure message is responded to the local switch management module,
Description
Managed Object
BSC
0..80
Step: 1
Unit
100 ms
Default Value
20
Default Value
Two seconds are long enough for the Abis interface to transmit signalling
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-103
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitLsReleaseAck
3GPP Name
None
3GPP Reference
None
This parameter is a protection timer used to wait for a local switch link
connection release acknowledgement message.
Start: A request for releasing the old link connection is sent to the
connection module.
Stop: An acknowledgement of link connection release request is
received from the connection module.
At expiry: In the case of local switch setup phase, a local switch setup
failure message is responded to the local switch management module.
In the case of local switch stop suspend phase, a local switch suspend
failure message is responded to the local switch management module,
Description
Managed Object
BSC
0..80
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
2-104
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitLSBscConn
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for a local switch connection
acknowledgement message from the connection module.
Start: A local switch connection message is sent to the connection
module.
Stop: A local switch connection acknowledgement message is received
from the connection module. The instance is terminated.
At expiry: A local switch setup failure message is returned to the local
Description
Managed Object
BSC
0..80
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
2-105
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitLSReleaseReq
3GPP Name
None
3GPP Reference
None
This parameter is a protection timer used to wait for a local switch link
release request message.
Start: A local switch set failure acknowledgement message is sent to the
local switch management module.
Stop: A local switch link release request message is received from the
local switch management module.
Description
At expiry: Resume the switch status before the local switch request.
Managed Object
BSC
0..80
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
Two seconds are enough for internal interaction between CMP and OMP.
Change Mode
Offline
Related features
None
2-106
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.6 Timer 2
2.6.1 Protective time for RF channel release (RmsT9)
Full Name
Abbreviation
RmsT9
3GPP Name
None
3GPP Reference
None
This parameter is timer T9.
Start: An RF CHANNEL RELEASE message is sent to the BTS when
the RANCS instance is released.
Stop: The RANCS instance receives an RF CHANNEL RELEASE ACK
message from the BTS.
Description
Managed Object
BSC
10..50
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
2-107
SJ-20100524164252-017|2011-07-28 (R1.4)
The larger the parameter value is, the longer the waiting time is, and the
Configuration Rule and
longer the time needed for service release due to the occurrence of
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT11
3GPP Name
T11
3GPP Reference
Description
Emlpp.
Managed Object
BSC
10..1000
Step: 1
Unit
100 ms
2-108
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
60
Default Value
Configuration Reason
seconds.
The longer the queuing time for assignment is, the more likely the
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT12
3GPP Name
None
3GPP Reference
None
2-109
SJ-20100524164252-017|2011-07-28 (R1.4)
instance is released.
Managed Object
BSC
50..18000
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
The larger the parameter value is, the longer the time waiting for an
acknowledgement message is. You can adjust the parameter value
according to the actual situation.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RmsT13
3GPP Name
None
3GPP Reference
None
This parameter is timer T13, which is used to supervise the mode modify
process of the BTS and MS. Mode modification refers to channel mode
modification. After the assignment of FACCH in the case of no SDCCH,
the channel mode is changed because no new channel will be allocated.
Start: The BSC sends a MODE MODIFY message to the BTS, and
sends a CHANNEL MODE MODIFY message to the MS.
Stop: The BSC receives a MODE MODIFY ACK/NACK message from
the BTS, and receives a CHANNEL MODE MODIFY ACK message
from the MS.
At expiry: Send a BSSMPA ASSIGNMENT FAILURE message to the
Description
MSC.
Managed Object
BSC
35..100
Step: 1
Unit
100 ms
Default Value
60
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-111
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
RmsT14
3GPP Name
None
3GPP Reference
None
This parameter is timer T14, which indicates the protection time for the
completion of UM assignment.
Start: The target child process sends ASS/HO COM to the source child
process.
Stop: The target child process receives ASS/HO COM ACK from the
source child process.
Description
Managed Object
BSC
10..50
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
recommended.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-112
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT16
3GPP Name
None
3GPP Reference
None
This parameter is timer RmsT16. In a directed retry process, the timer
is used to wait for receiving measurement reports when no target cell
is detected. Upon the expiry of the timer, the directed retry process is
initiated again to find whether some target cell is available. This process
can be repeated for several times.
Start: The source instance initiates a directed retry process after
receiving a radio resource request failure.
Stop: None
At expiry: When the number of timer expiries exceeds three, an
assignment failure message is sent to the MSC to wait for a clear
message. If the number of timer expiries does not exceed three, the
Description
Managed Object
BSC
20..60
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
recommended.
The longer the waiting time is, the more likely the directed retry
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
2-113
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsTqho
3GPP Name
Tqho
3GPP Reference
TS48.008
This parameter indicates the longest allowable queuing time for a
handover attempt.
Start: When the handover queuing switch is enabled, and no channel is
allocated for the handover request.
Stop: An available channel resource is assigned.
At expiry: Release the service instance on the target channel.
This parameter is already invalid. It is replaced by the handover queuing
Description
Managed Object
BSC
10..1000
Step: 1
Unit
100 ms
Default Value
50
Default Value
Make sure that the handover queuing time is no longer than two
Configuration Reason
queuing time can effectively reduce the congestion ratio. However, too
long queuing time may cause handover failure when the signal in the
neighbor cell changes. This parameter is already invalid. It is replaced
by the handover queuing timer (Emlpp), which specifies the handover
queuing time.
2-114
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
mT11
3GPP Name
None
3GPP Reference
None
The parameter is timer mT11, which is used for flow control in the case
of cell overload. mT11 works together with mT12 to modify the ACCESS
CONTROL parameter configured for the cell and inform the MS about
this modification through system information to achieve the flow control.
The RACH LOAD INDICATION message from the BTS is not processed
when the timer is started. The value set for timer mT11 must be smaller
than that for timer mT12.
Start: An RACH LOAD INDICATION message is received from the BTS.
Stop: None
At expiry: Continue processing the RACH LOAD INDICATION message
of the BTS.
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
2-115
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
80
The fluctuation of overload indication is unlikely to cause the flow
control fluctuation if new overload indication is not processed within
eight seconds.
The larger the parameter value is, the more stable the flow control is due
Adjustment Suggestion
is, the more likely the flow control fluctuates due to higher sensitivity to
load indication.
Change Mode
Offline
Related features
Related Parameters
[BSC]mT12
Relationship
mT11<mT12
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
mT12
3GPP Name
None
3GPP Reference
None
2-116
SJ-20100524164252-017|2011-07-28 (R1.4)
The parameter is timer mT12, which is used for flow control in the case
of cell overload. mT12 works together with mT11 to modify the ACCESS
CONTROL parameter configured for the cell and inform the MS about
this modification through system information to achieve the flow control.
The value of this timer must be larger than that of mT11 timer. The
process how mT11 and mT12 control the cell traffic is as follows: When
an overload message is received at the network side, the system
lowers the traffic level by one, and then starts mT11 and mT12. The
OVERLOAD message received before the expiry of mT11 is neglected.
If an OVERLOAD message is received after the expiry of mT11 but
before the expiry of mT12, the system lowers the traffic level by one
again, and restarts mT11 and mT12. If no OVERLOAD message is
received after the expiry of mT12, the system increases the traffic level
by one and then restarts mT12. The change of traffic level means
different traffic rejection ratio.
Start: An RACH LOAD INDICATION message is received from the BTS.
Stop: A RACH LOAD INDICATION message from the BTS is received
after the expiry of mT11.
At expiry: Lower the traffic level by one.
Description
Managed Object
BSC
50..200
Step: 1
Unit
100 ms
Default Value
150
mT11 is used to prevent the fluctuation of load indication. mT12 is used
Default Value
Configuration Reason
The larger the parameter value is, the greater the flow control fluctuation
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]mT11
Relationship
mT11<mT12
Related Interfaces
None
Impact on Equipment
Impact on service
2-117
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Timer2
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Tmicro
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to prevent an MS travelling fast from
camping on the same layer. The timer is started when the MS is handed
over to a cell (or a call is set up). Before the expiry of the timer, the
MS cannot be handed over to a neighbour cell on the same layer. A
neighbour cell on the same layer can be a candidate only after the
expiry of the timer.
Start: A call is set up.
Stop: None
At expiry: Enable the handover on the same layer.
Description
Managed Object
BSC
50..200
Step: 1
Unit
100 ms
Default Value
80
The purpose of this timer is to reduce the handover times of the
Default Value
Configuration Reason
2-118
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Tbsic
3GPP Name
None
3GPP Reference
None
This parameter specifies a time period starting from the setup of a call or
the completion of a handover (inter-cell or intra-cell) during which the
evaluation of C/I is deemed as unreliable and therefore the handover
to a specific TRX is not allowed. In this period, the MS can decode the
BSIC of the interfering (adjacent) cell before a handover decision.
This parameter is only valid in the case of concentric cell.
Start: Relevant parameters are initiated after the setup of a link to the
MS upon immediate assignment, assignment, or handover.
Stop: The timer expires.
Description
Managed Object
BSC
20..640
Step: 1
Unit
100 ms
Default Value
50
Default Value
Generally, C/I value obtained within five seconds after the setup of a call
Configuration Reason
is regarded as unreliable.
2-119
SJ-20100524164252-017|2011-07-28 (R1.4)
The default value is recommended. The larger the parameter value is,
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3121
3GPP Name
T3121
3GPP Reference
3GPP TS 44.018
This parameter is timer T3121, which specifies the protection time after
the inter-system to utran handover command (UM) is sent to the MS.
Start: When the BSC sends an INTER-SYSTEM TO UTRAN
HANDOVER COMMAND message to the MS.
Stop: When the BSC receives a CLEAR COMMAND from the MSC
(which is generally sent after the completion of handover), or receives a
HANDOVER FAILURE message from the MS.
At expiry: The BSC sends a CLEAR REQUEST message to the MSC.
The cause value is CAUSE_RI_MSG_FAIL, indicating a message failure
Description
Managed Object
BSC
1..650
Step: 1
Unit
100 ms
2-120
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
100
Default Value
The default value is set in consideration of the time needed for the MS to
Configuration Reason
A too large parameter value may result in the waste of channel resources
and traffic congestion. A too small parameter value may decrease the
handover success rate.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3101
3GPP Name
T3101
3GPP Reference
3GPP TS 44.018
This parameter is timer T3101, which is used to supervise the immediate
assignment process.
Start: When the BSC sends an IMMEDIATE ASSIGNMENT COMMAND
message.
Stop: When an ESTABLISH INDICATION message is received from
the BSC.
At expiry: The BSC sends an RF CHANNEL RELEASE message to
Description
the BTS.
Managed Object
BSC
2-121
SJ-20100524164252-017|2011-07-28 (R1.4)
10..100
Value Range and Step
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
The default value is set in consideration of the time needed for sending
an immediate assignment message to the MS and the time needed
for the MS to access the network.
A too large parameter value may result in the waste of channel resources
and traffic congestion. A too small parameter value may decrease the
immediate assignment success rate.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3103
3GPP Name
T3103
3GPP Reference
3GPP TS 44.018
2-122
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
0..1000
Step: 1
Unit
100 ms
Default Value
60
Default Value
Configuration Reason
The default value is set in consideration of the time needed for sending
the handover command to the MS and the time needed for the MS to
complete the inter-cell handover.
A too large parameter value may result in the waste of channel resources
and traffic congestion. A too small parameter value may decrease the
handover success rate.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]rmst1
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-123
SJ-20100524164252-017|2011-07-28 (R1.4)
Assignment period
Abbreviation
RmsT3107
3GPP Name
T3107
3GPP Reference
3GPP TS 44.018
This parameter is timer T3107, which is used to supervise an assignment
process and an intra-cell handover process.
Start: When the BSC sends an RIL3_RR ASSIGNMENT COMMAND
message to the MS.
Stop: When the BSC receives an RIL3_RR ASSIGNMENT COMPLETE
or RIL3_RR ASSIGNMENT FAILURE message.
At expiry: In the case of an assignment process, both the new and old
channels are released, relevant connections to the MS are cleared, and
a BSSAP ASSIGNMENT FAILURE message is sent to the MSC. In the
case of an intra-cell handover process, a CLEAR REQUEST message
is sent to the MSC. The cause value is CAUSE_RI_FAIL, indicating a
Description
Managed Object
BSC
0..1000
Step: 1
Unit
100 ms
Default Value
60
Default Value
Configuration Reason
The default value is set in consideration of the time needed for sending
the assignment command to the MS and the time needed for the MS to
complete the assignment.
A too large parameter value may result in the waste of channel resources
and traffic congestion. A too small parameter value may decrease the
assignment success rate.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]rmst1
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-124
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3109
3GPP Name
T3109
3GPP Reference
3GPP TS 44.018
This parameter is timer T3109, which is used to supervise a channel
release process.
Start: When the BSC send an RIL3_RR CHANNEL RELEASE message
to the MS.
Stop: When the BSC receives a RELEASE INDICATION message
from the BTS, which is sent by the BTS when a DISC frame from the
MS is received.
At expiry: The BSC sends an RF CHANNEL RELEASE message to the
Description
Managed Object
BSC
0..1000
Step: 1
Unit
100 ms
Default Value
50
The default value is set in consideration of the time needed for the
Default Value
Configuration Reason
command, and the time needed for the call drop of the MS caused by
the failure of receiving a channel release command.
To avoid crosstalk caused by network-side channel release before the
Change Mode
Offline
Related features
None
2-125
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RmsT3111
3GPP Name
T3111
3GPP Reference
3GPP TS 44.018
This parameter is timer RmsT3111, which specifies a protection time to
ensure that the radio link layer is disconnected after the radio link layer
at the Um interface is released. The release and deactivation of the
radio channel is performed upon the expiry of this timer.
Start: When the BSC receives a RELEASE INDICATION message.
At expiry: The BSC sends an RF CHANNEL RELEASE message to the
Description
Managed Object
BSC
1..300
Step: 1
Unit
100 ms
Default Value
Default Value
The default value is set in consideration of the time needed for the BTS
Configuration Reason
and traffic congestion. If the parameter value is too small, the BTS
Adjustment Suggestion
cannot send the UA message to the MS in time, and thus the MS may
fail to complete the channel release in a short time.
2-126
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TModeModifyConn
3GPP Name
None
3GPP Reference
None
This parameter is a connection delay timer used in the mode change
process. This timer is used to wait for the complete of connection (Abis
connection and TC connection) after a connection request is sent.
Start: A connection request is sent.
Stop: All connections are completed.
Description
Managed Object
BSC
50..70
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
mT7
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for a response from the MSC
after a HANDOVER REQUIRED message is sent to the MSC and the
target cell is a UTRAN cell.
Start: The BSC sends a HANDOVER REQUIRED message to the MSC,
and the target cell is a UTRAN cell.
Stop: The BSC receives a HANDOVER COMMAND message from
the MSC.
At expiry: Set a penalty time for the target UTRAN cell specified by the
HANDOVER REQUIRED message, during which the handover priority
of the target cell is decreased.
Description
Managed Object
BSC
1..65535
Step: 1
Unit
100 ms
Default Value
100
2-128
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitAHoReq
3GPP Name
None
3GPP Reference
None
This parameter specifies the waiting time for the handover through A
interface in a 2G/3G relocation process.
Start: A radio resource reservation success message is sent to the RNC.
Stop: A handover request is received from the MSC.
At expiry: Release the radio resource, and terminate the instance.
Description
Managed Object
BSC
4..50
Step: 1
2-129
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
100 ms
Default Value
10
Default Value
Configuration Reason
The default value is set to 10 because one second is enough for the
RNC to send a handover request to the MSC and for the MSC to forward
the handover request to the BSC.
Generally, the default value is recommended. The waiting time can
be appropriately prolonged if the timer expires when waiting for the
handover through A interface.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
disconnection
Abbreviation
RmsT15(TForceOccupy)
3GPP Name
None
3GPP Reference
None
2-130
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the waiting time for the release of resource
when an instance is forcibly released.
Start: A PREEMPT APPLY message is sent to the object to be released
when the target instance is going to be forcibly released.
Stop: The target instance receives a response of RESOURCE
AVAILABLE from the object to be released.
At expiry: Search for another instance that can be forcibly released. If
the instance to be released exists, a forced release process is retried,
Description
Managed Object
BSC
10..50
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set to 30 because three seconds are enough for the
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BcProtect
3GPP Name
None
3GPP Reference
None
This parameter is a protection timer used to wait for a response from
the FUC after the system information is broadcasted. A response from
the FUC indicates that the BTS has correctly received the system
information.
Start: The BSC sends the system information to the BTS.
Stop: The BSC receives a response to the system information from
the BTS.
At expiry: If the number of timer expiries does not exceed four (the
maximum number of allowable times), the BSC sends the system
information to the BTS again and the timer is restarted. If the number
of timer expiries exceeds four, the BSC stops sending the system
information to the BTS and clears the cell instance information of the
BTS.
Description
Managed Object
BSC
30..100
Step: 1
Unit
100 ms
Default Value
50
Default Value
Five seconds are enough for the FUC to receive and process the system
Configuration Reason
information.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-132
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TwaitHoPFMAck
3GPP Name
None
3GPP Reference
None
When IP bearer is adopted on the user plane at the A interface, the BSC
needs to notify the CN to change its vocoder in an intra-BSC handover
process because TC is located in the MGW. The vocoder change in
the CN is triggered by a HANDOVER PERFORMED message. A
HANDOVER PERFORMED ACK message is required to ensure that
the MSC has successfully received the HANDOVER PERFORMED
message and required the MGW to change the vocoder and thus
avoid voice problems. This parameter is a timer used to wait for the
HANDOVER PERFORMED ACK message from the MSC.
Start: When the BSC sends a HANDOVER PERFORMED message
to the MSC.
Stop: The BSC receives a HANDOVER PERFORMED ACK message
from the MSC.
At expiry: Send a CLEAR REQUEST message to the MSC to release
the call. The cause value is 0x60, indicating a protocol error between the
Description
Managed Object
BSC
50..70
Step: 1
Unit
100 ms
Default Value
60
Default Value
Six seconds are enough for signalling transfer and the processing in
Configuration Reason
the MSC.
Change Mode
Offline
Related features
2-133
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TuTrauSyn
3GPP Name
3GPP Reference
Description
Managed Object
BSC
10..600
Step: 1
Unit
100 ms
Default Value
10
Default Value
Configuration Reason
2-134
SJ-20100524164252-017|2011-07-28 (R1.4)
this parameter appropriately and observe whether the rate of call drops
caused by the detection of TRAU frames is reduced. If yes, set a larger
value to the parameter until the call drop rate caused by TRAU frames
does not change greatly.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RtdDefault
3GPP Name
3GPP Reference
48.058
This parameter specifies the Round Trip Delay (RTD). In a handover
process when AMR voice encoding is adopted, the BSC sends a
PRE-HANDOVER NOTIFICATION message to the BTS. During the
RTD, the BTS negotiates with the TC to take some actions, such as
disable the voice rate adjustment and terminate TFO. After that, the BSC
sends a handover command to the MS. RTD is the transmission delay
caused by the round trip between the BTS and the TC. It is reported
by the BTS to the BSC through a ROUND TRIP DELAY REPORT
message. The BSC uses the default value of RTD (RtdDefault) before
receiving this message.
Start: The BSC sends a PRE-HANDOVER NOTIFICATION message
Description
to the BTS.
2-135
SJ-20100524164252-017|2011-07-28 (R1.4)
BSC
1..20
Step: 1
Unit
20 ms
Default Value
Default Value
Configuration Reason
transfer on the user plane between the BTS and the TC.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitRncRelocComm
3GPP Name
None
3GPP Reference
None
2-136
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter specifies the time for the BSC to wait for a RELOACTION
COMMIT message from the RNC when the Iur-g interface configured
between 2G and 3G is used for relocation.
Start: A HandoverRequestAck message is sent to the MSC.
Stop: A RELOCATION COMMIT message is received from the RNC
at the Iur-g interface.
At expiry: Release the corresponding relocation instance and allocated
Description
resources.
Managed Object
BSC
0..200
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
The default value, already taking the message delay on site into
Adjustment Suggestion
consideration, is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TSCPingPang
2-137
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates a time period after a subcell handover, in which
the MS is handed over between subcells frequently, for example, the MS is
handed over back and forth between two subcells within the same BSC, or
the MS is handed over back and forth between two subcells between two
BSCs. The fast inter-subcell handovers are counted in the performance
Description
report.
Managed Object
BSC
20..1000
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
ping-pong handover is. Similarly, the larger the parameter is, the more
restrictive the criterion for ping-pong handover is. This parameter can
be used to evaluate whether inter-subcell handover parameters are
properly set.
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-138
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TConfBIPBFault
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to confirm that a BIPB failure occurs. The
timer is started when a BIPB failure occurs. Upon the expiry of the timer,
Description
all DSPs of the BIPB board are switched to the standby ones.
Managed Object
BSC
30..1200
Step: 1
Unit
100 ms
Default Value
950
Default Value
Configuration Reason
time is. If all sites in the system are IP-based sites, decrease the
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TConfBIPBDSPFault
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-139
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TConfBIPBDSPFault
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to confirm that a BIPB DSP failure occurs.
The timer is started when a BIPB DSP failure occurs. Upon the expiry of
Description
the timer, the BIPB board switches the failed DSP to the standby one.
Managed Object
BSC
5..600
Step: 1
Unit
100 ms
Default Value
100
Default Value
Generally, the BIPB DSP can be reset in 10 seconds, which avoids the
Configuration Reason
active/standby switchover.
You can adjust the parameter value according to the actual situation after
Adjustment Suggestion
measuring the time needed for DSP restoration after the DSP is reset.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TConfBIPBFault
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TConfLapdFault
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to confirm that an LAPD failure occurs.
The timer is started when a LAPD failure occurs. Upon the expiry of the
Description
timer, all CPUs of the LAPD board are switched to the standby ones.
Managed Object
BSC
30..1200
Step: 1
Unit
100 ms
Default Value
950
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TConfLapdCpuFault
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TConfLapdCpuFault
2-141
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to confirm that an LAPD CPU failure occurs. The timer is started when a LAPD CPU failure occurs. Upon the expiry of the timer, the LAPD board switches the failed CPU to the standby
one. In the case of CPU1 failure, all CPUs of the LAPD board need to be
switched to the standby ones. In the case of non-CPU1 failure, only the
Description
Managed Object
BSC
5..600
Step: 1
Unit
100 ms
Default Value
50
Default Value
A delay of five seconds is used to make sure that the LAPD CPU failure
Configuration Reason
is not transient.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TConfLapdFault
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-142
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TConfSunitNor
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to determine whether IPRB DSP, BIPB
DSP, or LAPD CPU restores from a failure. The timer is started when
IPRB DSP, BIPB DSP, or LAPD CPU restores. Upon the expiry of the
timer, the system searches for failed board(s). If a failed board is found,
Description
Managed Object
BSC
5..300
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
10 seconds are enough to confirm that the unit restores from a failure.
Adjustment Suggestion
not recommended.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]TconfBIPBFault
[BSC]TconfLapdFault
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-143
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BVCBlkMax
3GPP Name
BVC-BLOCK-RETRIES
3GPP Reference
Description
Managed Object
BSC
3..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
2-144
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->GPRS maximum Retrying Times
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BVCUblkMax
3GPP Name
BVC-UNBLOCK-RETRIES
3GPP Reference
Description
attempts.
Managed Object
BSC
3..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
2-145
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BVCRestMax
3GPP Name
BVC-RESET-RETRIES
3GPP Reference
Description
RESET" message for N times, the BSC stops sending the "BVC RESET"
2-146
SJ-20100524164252-017|2011-07-28 (R1.4)
message and informs the OMS about the failure. This parameter value,
N, indicates the maximum number of BVC RESET attempts.
This parameter is changed in V6.20.614a.
Managed Object
BSC
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NSBlkMax
3GPP Name
NS-BLOCK-RETRIES
3GPP Reference
2-147
SJ-20100524164252-017|2011-07-28 (R1.4)
After the BSC sends an "NS BLOCK" message to the SGSN, the "NS
BLOCK" process is initiated again if the BSC does not receive an "NS
BLOCK ACKNOWLEDGE" message from the SGSN within the time
specified by NS_T1.
If no response is received from the SGSN after the BSC sends the "NS
BLOCK" message for N times, the BSC terminates the "NS BLOCK"
process and informs the OMS about the failure. This parameter value,
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NSUnblkMax
2-148
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
NS-UNBLOCK-RETRIES
3GPP Reference
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-149
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
NSAliveMax
3GPP Name
NS-ALIVE-RETRIES
3GPP Reference
Description
Managed Object
BSC
0..20
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-150
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
SuspendMax
3GPP Name
SUSPEND-RETRIES
3GPP Reference
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]ResumeSetOpt
Relationship
Related Interfaces
2-151
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ResumeMax
3GPP Name
RESUME-RETRIES
3GPP Reference
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
2-152
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]ResumeSetOpt
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UpdateMax
3GPP Name
RA-CAPABILITY-UPDATE-RETRIES
3GPP Reference
2-153
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-154
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
DownLoadBssPFCMax
3GPP Name
DOWNLOAD-BSS-PFC-RETRIES
3GPP Reference
Description
failure.
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Related features
Related Parameters
[BSC]PFCSupport
Relationship
This parameter is only valid when the switch of PFC process is enabled
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-155
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ModifyBssPFCMax
3GPP Name
MODIFY-BSS-PFC-RETRIES
3GPP Reference
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Related features
Related Parameters
[BSC]PFCSupport
Relationship
This parameter is only valid when the switch of PFC process is enabled
in the BSC.
2-156
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSHoReqMaxNum
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the maximum number of times that the PS
HANDOVER REQUIRED message is sent during PS handover. The PS
HANDOVER REQUIRED message is sent again upon the expiry of timer
Description
T12PsHo.
Managed Object
BSC
1..6
Step: 1
Unit
Time
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
Gb
2-157
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT1
3GPP Name
T1
3GPP Reference
Description
the SGSN.
2-158
SJ-20100524164252-017|2011-07-28 (R1.4)
At expiry: The BSC sends the SUSPEND SGSN message for N times.
N, the maximum number of times that the SUSPEND SGSN message
can be sent, can be set.
Managed Object
BSC
10..300
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT2
3GPP Name
T2
3GPP Reference
2-159
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
10..1200
Step: 1
Unit
100 ms
Default Value
150
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
2-160
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->GPRS Timer
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT3
3GPP Name
T3
3GPP Reference
Description
Managed Object
BSC
1..100
Step: 1
Unit
100 ms
Default Value
30
2-161
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]ResumeSetOpt
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT4
3GPP Name
T4
3GPP Reference
Description
2-162
SJ-20100524164252-017|2011-07-28 (R1.4)
that the message is sent does not exceed the maximum number. The
BSS terminates the RESUME process and notifies the MS to initiate a
ROUTING AREA UPDATE process when T4 expires and the number of
times that the RESUME message is sent exceeds the maximum number.
The following describes when the timer is started and stopped, as well
as the action at expiry of the timer.
Start: The BSC initiates a RESUME process.
Stop: A RESUME ACK/NACK message is received from the SGSN.
At expiry: The BSC sends the MODIFY BSS PFC message for N times.
N, the maximum number of times that the MODIFY BSS PFC message
can be sent, can be set.
Managed Object
BSC
1..100
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]ResumeSetOpt
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-163
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BssgpT5
3GPP Name
T5
3GPP Reference
Description
Managed Object
BSC
10..300
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
2-164
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT6
3GPP Name
T6
3GPP Reference
Description
Managed Object
BSC
1..100
Step: 1
Unit
100 ms
Default Value
30
2-165
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PFCSupport
Relationship
This parameter is only valid when the switch of PFC process is enabled
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BssgpT8
3GPP Name
T8
3GPP Reference
Description
2-166
SJ-20100524164252-017|2011-07-28 (R1.4)
At expiry: The BSC sends the MODIFY BSS PFC message for N times.
N, the maximum number of times that the MODIFY BSS PFC message
can be sent, can be set.
Managed Object
BSC
1..100
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Set the parameter in consideration of the default value, the link stability
at Gb interface, and the round trip delay at Gb interface. The default
value is recommended when Gb interface is normal.
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
Related Parameters
[BSC]PFCSupport
Relationship
This parameter is only valid when the switch of PFC process is enabled
in the BSC.
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RIR Timer
Abbreviation
TRIR
3GPP Name
T(RIR)
2-167
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
BSC
50..300
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RI Timer
2-168
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TRI
3GPP Name
T(RI)
3GPP Reference
Description
Managed Object
BSC
50..300
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-169
SJ-20100524164252-017|2011-07-28 (R1.4)
RIAE Timer
Abbreviation
TRIAE
3GPP Name
T(RIAE)
3GPP Reference
Description
times.
Managed Object
BSC
50..300
Step: 1
Unit
100 ms
Default Value
50
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
2-170
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
CellFcPer
3GPP Name
None
3GPP Reference
None
This parameter indicates the period for the statistics of BVC leak rate in
the BVC Flow Control process, that is, the period of long BVC statistics.
To provide a reference for the BVC flow control at the SGSN side,
the BSSGP process at the BSS side performs a periodic statistics on
current BVC leak rate. When the timer used for long statistics times
out, a BVC Flow Control process is initiated without condition. If the
difference between two statistical leak rates exceeds CellFcThs, an
acknowledgement from the SGSN is required before the BVC Flow
Control process is initiated. When the timer used for short statistics
times out, and the difference between two leak rates exceeds CellFcThs,
a BVC Flow Control process is initiated after an acknowledgement is
received from the SGSN.
The following describes when the timer is started and stopped, as well
as the action at expiry of the timer.
Start: When a cell is created.
Stop: When the cell is blocked or deleted.
Description
Managed Object
BSC
2..65535
Step: 1
Unit
10 ms
Default Value
3000
Default Value
Configuration Reason
2-171
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsFcPer
3GPP Name
None
3GPP Reference
None
2-172
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the period for the statistics of MS leak rate
in the MS Flow Control process.
To provide a reference for the flow control at the SGSN side, the BSSGP
process at the BSS side performs a periodic statistics on current leak
rate for each MS. When the timer times out, an MS Flow Control process
is initiated without condition.
The following describes when the timer is started and stopped, as well
as the action at expiry of the timer.
Start: When a downlink LLC frame is received in BSSGP idle state.
Stop: When the transmission of downlink LLC frames is completed.
Description
Managed Object
BSC
2..65535
Step: 1
Unit
10 ms
Default Value
3000
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-173
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
NS_T1
3GPP Name
Tns-block
3GPP Reference
Description
protocol).
Managed Object
BSC
10..1200
Step: 1
Unit
100 ms
Default Value
100
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
2-174
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
NS_T2
3GPP Name
Tns-reset
3GPP Reference
Description
Managed Object
BSC
10..120
Step: 1
Unit
100 ms
Default Value
100
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
10 seconds are long enough as the time delay of a reset process when
the Gb interface is normal. If the delay at the Gb interface is long, it is
recommended to increase the parameter value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
2-175
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NS_T3
3GPP Name
Tns-test
3GPP Reference
Description
Managed Object
BSC
10..600
Step: 1
Unit
100 ms
Default Value
300
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
A time period within 30 seconds indicates a normal NSVC link when the
Gb interface is normal. If the NSVC link is not stable, the parameter
value can be appropriately decreased.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
2-176
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NS_T4
3GPP Name
Tns-alive
3GPP Reference
Description
Managed Object
BSC
30..30
Step: 1
Unit
100 ms
Default Value
30
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
Three seconds are long enough as the time delay of an NS alive process
when the Gb interface is normal. If the delay at the Gb interface is long,
it is recommended to increase the parameter value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
2-177
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NS_T5
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to indicate the maximum retry period of
the NSVC reset process. The following describes when the timer is
started and stopped, as well as the action at expiry of the timer.
Start: When an NSVC reset process is started.
Stop: When a reset acknowledgement is received from the SGSN.
Description
Managed Object
BSC
1800..1800
Step: 1
Unit
100 ms
Default Value
1800
Default Value
The default value is set according to the range specified by the protocol
Configuration Reason
18 seconds are long enough as the time delay of a reset process when
the Gb interface is normal. If the delay at the Gb interface is long, it is
recommended to increase the parameter value.
Change Mode
Offline
Related features
None
Related Parameters
None
2-178
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3169
3GPP Name
T3169
3GPP Reference
Description
longer. TFI and USF resources shall be released for reuse in the BSC.
Managed Object
BSC
0..65535
Step: 1
Unit
10 ms
Default Value
500
Default Value
Configuration Reason
2-179
SJ-20100524164252-017|2011-07-28 (R1.4)
TFI and USF resources are released for reuse on the network side
when timer T3169 expires. The TBF is forcibly released when the
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3191
3GPP Name
T3191
3GPP Reference
Description
Stop:
2-180
SJ-20100524164252-017|2011-07-28 (R1.4)
If the RLC is in ACK mode and the MS finds all downlink blocks have
been received, the MS sends a "Packet Downlink Ack" message whose
FAI equals 1 through the uplink block specified by the RRBP field. The
BSC stops timer T3191 if it receives the "Packet Downlink Ack" message
before the expiry of timer T3191.
If the RCL is in NACK mode, the MS sends a "Packet Control Ack"
message through the uplink block specified by the RRBP field. The
BSC stops timer T3191 if it receives the "Packet Control Ack" message
before the expiry of timer T3191.
At expiry: The BSC releases the TBF.
Managed Object
BSC
0..65535
Step: 1
Unit
10 ms
Default Value
500
Default Value
Configuration Reason
Adjustment Suggestion
A large parameter value can reduce the downlink TBF failure rate.
Keeping TBF for a long time may result in the waste of channel
resources and TFI resources and impacts user experience. Therefore,
in-time release of TBF is recommended.
Use the recommended value specified in Table 13.2.1: Specification of
timers used in GPRS on the Network side of 3GPP TS 04.60.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
2-181
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3193
3GPP Name
T3193
3GPP Reference
Description
Managed Object
BSC
0..65535
Step: 1
Unit
10 ms
Default Value
51
Default Value
Configuration Reason
2-182
SJ-20100524164252-017|2011-07-28 (R1.4)
the MS is in Ready state). In this case, more time is needed for the
establishment of a downlink TBF.
Take the service load in a cell into account when setting T3192/T3193. In
the case of sufficient network resources, set a large parameter value to
reduce the TBF establishment time, increase the data transmission rate,
and thus improve indexes relevant to downlink throughput efficiency.
T3193 must be slightly larger than T3192 because T3193 is a parameter
on the network side.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]T3192
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3195
3GPP Name
T3195
3GPP Reference
2-183
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is timer T3195, which determines the time for protecting
downlink TBF when the MS stops responding due to radio link failure
or cell change.
Start: T3195 is started when the value of N3105 reaches N3105_MAX.
Stop: None
Description
Managed Object
BSC
0..65535
Step: 1
Unit
10 ms
Default Value
500
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-184
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSRelDelay
3GPP Name
None
3GPP Reference
None
This parameter is a timer indicating the delay time for dynamic
PDCH-to-TCH conversion. The following describes when the timer is
started and stopped, as well as the action at expiry of the timer.
Start: All services (including uplink and downlink) on the PDCH are
released.
Stop: The PDCH is occupied by TBF again.
Description
Managed Object
BSC
50..600
Step: 1
Unit
100 ms
Default Value
300
Default Value
Configuration Reason
The default value 300 can ensure that the dynamic PS channel can be
converted back into TCH when no service exists on the PS channel
for five seconds.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-185
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
T12PsHo
3GPP Name
T12
3GPP Reference
3GPP TS 48.018
This parameter is a timer used to control the time of a PS HANDOVER
REQUIRED process. The timer is started when a PS Handover Required
message is sent. It is stopped when a PS HANDOVER REQUIRED ACK
message or PS HANDOVER REQUIRED NACK message is received.
Upon the expiry of the timer, the PS HANDOVER REQUIRED message
Description
is sent again.
Managed Object
BSC
50..1200
Step: 1
Unit
10 ms
Default Value
300
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-186
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TwaitRelInPSHo
3GPP Name
Internal
3GPP Reference
None
The parameter specifies the waiting time for the release of resources
after a PS Handover Command message is sent.
This timer is started after a PS HANDOVER COMMAND message
is sent to the MS. It is stopped after a DELETE BSS PFC message
is received from the SGSN, or a HANDOVER COMPLETE message
is received from the target cell. Upon the expiry of the timer, a PS
Description
Managed Object
BSC
100..1000
Step: 1
Unit
10 ms
Default Value
300
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
2-187
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
AmrHalfAcs
3GPP Name
3GPP Reference
45.009
The code has eight bits. Bits 6 to 8 are reserved. 7.40 kbit/s is bit 5,
6.70 kbit/s bit 4, 5.9 kbit/s is bit 3, 5.15 kbit/s is bit 2, and 4.75 kbit/s
bit 1. Yes stands for 1, that is, including this speech coding mode. No
stands for 0, that is, excluding this speech coding mode. At most four
coding modes can be set.
When interface A is in IP mode, ACS is decided by the MSC and this
Description
parameter is invalid.
Managed Object
BSC
The value is Yes or No for 4.75 kbit/s, 5.15 kbit/s, 5.90 kbit/s, 6.70 kbit/s,
Unit
None
The default value is "No, Yes, Yes, Yes, Yes", that is, 00011110. In this
case, you can export the decimal number "30" from the network planning
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
High rates and used along with low rates for wide applications.
Generally, high rates are used along with low rates. When a cell has
good radio signal quality, you can select high rates only. Otherwise, you
can select low rates only.
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrStartMode
2-188
SJ-20100524164252-017|2011-07-28 (R1.4)
When only one of the five bits of this parameter is set to No, the value
range is 1 to 4.
When two of the five bits of this parameter are set to No, the value
range is 1 to 3.
Relationship
When three of the five bits of this parameter are set to No, the value
range is 1 to 2.
When four of the five bits of this parameter are set to No, the value
range is 1.
When the five bits of this parameter are all set to No, the value range is
null.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Thresholds of AMR
Abbreviation
AmrThresholds
3GPP Name
threshold
3GPP Reference
45.009
The parameter AmrThresholds includes five elements: AmrThresholds1,
AmrThresholds2, AmrThresholds3, AmrThresholds4, and
AmrThresholds5, which meet the following requirements:
AmrThresholds1 AmrThresholds2 AmrThresholds3
AmrThresholds4 AmrThresholds5
AmrThresholds1 + AmrHysteresis1 AmrThresholds2 +
AmrHysteresis2AmrThresholds3 + AmrHysteresis3 AmrThresholds4
+ AmrHysteresis4 AmrThresholds5 + AmrHysteresis5
When CIR is more than AmrThresholdsN+AmrHysteresisN, the speech
coding rate will be changed to mode N+1. When CIR is less than
Description
Managed Object
BSC
2-189
SJ-20100524164252-017|2011-07-28 (R1.4)
63: 31.5 dB
Unit
0.5 dB
Default Value
Default Value
Configuration Reason
Generally, you do not have to adjust the setting of this parameter unless
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrHysteresis
AmrThresholds1 AmrThresholds2 AmrThresholds3
AmrThresholds4 AmrThresholds5
Relationship
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Hysteresis of AMR
Abbreviation
AmrHysteresis
3GPP Name
hysteresis
2-190
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
45.009
The parameter AmrThresholds includes five elements: AmrThresholds1,
AmrThresholds2, AmrThresholds3, AmrThresholds4, and
AmrThresholds5, which meet the following requirements:
AmrThresholds1 AmrThresholds2 AmrThresholds3
AmrThresholds4 AmrThresholds5
AmrThresholds1 + AmrHysteresis1 AmrThresholds2 +
AmrHysteresis2AmrThresholds3 + AmrHysteresis3 AmrThresholds4
+ AmrHysteresis4 AmrThresholds5 + AmrHysteresis5
When CIR is more than AmrThresholdsN+AmrHysteresisN, the speech
coding rate will be changed to mode N+1. When CIR is less than
Description
Managed Object
BSC
The value rage is 0 to 15 in modes 1, 2, 3, 4, and 5.
0: 0.0 dB
1: 0.5 dB
2: 1.0 dB
...
15: 7.5 dB
Unit
0.5 dB
Default Value
[4, 5, 5, 6, 6]
Default Value
Configuration Reason
The default value keeps proper differences among the thresholds of rate
increases and decreases, avoiding frequent adjustments and ensuring
timely adjustments.
By checking the frequency of rate adjustments (through tests, analyses,
or AMR rate monitoring tools), you can decide whether this parameter
Adjustment Suggestion
is set properly. When the rate is adjusted too frequently, you can set
the parameter to a higher value.
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrThresholds
AmrThresholds1 + AmrHysteresis1 AmrThresholds2 + AmrHysteresis2
Relationship
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-191
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsAmrlCM
3GPP Name
3GPP Reference
45.009
This parameter decides which one, the coding mode specified in
Startmode or the default initial coding mode specified in the protocol
45.009, is used as the initial AMR speech coding mode.
When one mode is used, the corresponding rate is used as the initial
coding mode.
When two or three modes are used, the lowest rate is used as the
initial coding mode.
When four modes are used, the second lowest rate is used as the initial
coding mode.
When interface A is in IP mode, this parameter is not used. The initial
coding mode depends on IpaAMRStartMode in the system control
Description
parameters.
Managed Object
BSC
Unit
None
Default Value
Start-mode codec
Default Value
Configuration Reason
In the default mode, the initial coding mode can be set as needed.
In good radio network conditions, Start-mode codec and high-rate
Adjustment Suggestion
In poor radio network conditions, you can set this parameter to "Initial
codec mode", that is, the default initial rate specified in the protocol.
Change Mode
Offline
Related features
2-192
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]AmrStartMode
Relationship
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Start mode
Abbreviation
AmrStartMode
3GPP Name
Start Mode
3GPP Reference
44.018
Description
Managed Object
BSC
The value range is described as follows:
1: The coding mode with the lowest code rate is selected as the initial
coding mode.
2: If there is more than one coding mode, the coding mode with the
second lowest code rate will be selected.
3: If there are more than two coding modes, the coding mode with the
third lowest code rate will be selected.
4: If there are more than three coding modes, the coding mode with the
Unit
None
Default Value
Default Value
Setting the coding mode with the lowest code rate can ensure good
Configuration Reason
Adjustment Suggestion
2-193
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrHarfAcs
[BSC]IsAmrlCM
When only one of the five bits of the parameter AmrHarfAcs is set to No,
the value range is 1 to 4.
When two of the five bits of the parameter AmrHarfAcs are set to No,
the value range is 1 to 3.
When three of the five bits of the parameter AmrHarfAcs are set to No,
Relationship
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsAmrNscb
3GPP Name
3GPP Reference
44.018
This parameter decides whether to disable the AMR noise control
function at the MS side, that is, whether to suppress the background
noise and keep the original voice quality. Noise suppression is a function
at the MS side.
No: Noise suppression enabled.
Description
2-194
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
quality.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AmrFullAcs
3GPP Name
3GPP Reference
45.009
2-195
SJ-20100524164252-017|2011-07-28 (R1.4)
The code has eight bits. 12.2 kbit/s is bit 8, 10.2 kbit/s bit 7, 7.95 kbit/s
bit 6, 7.40 kbit/s bit 5, 6.70 kbit/s bit 4, 5.9 kbit/s bit 3, 5.15 kbit/s bit 2,
and 4.75 kbit/s bit 1. Yes stands for 1, that is, including this speech
coding mode. No stands for 0, that is, excluding this speech coding
mode. At most four coding modes can be set.
When interface A is in IP mode, ACS is decided by the MSC and this
Description
parameter is invalid.
Managed Object
BSC
The value is Yes or No for 4.75 kbit/s, 5.15 kbit/s, 5.90 kbit/s, 6.70 kbit/s,
Unit
None
The default value is "No, Yes, No, Yes, No, Yes, No, Yes", that is,
10101010. In this case, you can export the decimal number "170" from
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrStartMode
When four of the eight bits of this parameter are set to No, the value
range is 1 to 4.
When five of the eight bits of this parameter are set to No, the value
range is 1 to 3.
Relationship
When six of the eight bits of this parameter are set to No, the value
range is 1 to 2.
When seven of the eight bits of this parameter are set to No, the value
range is 1.
When the eight bits of this parameter are all set to No, the value range is
null.
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-196
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Thresholds of AMR
Abbreviation
AmrThresholds
3GPP Name
threshold
3GPP Reference
45.009
This parameter includes seven elements: AmrThresholds1,
AmrThresholds2, AmrThresholds3, AmrThresholds4, AmrThresholds5,
AmrThresholds6, and AmrThresholds7, which meet the following
requirements:
AmrThresholds1 AmrThresholds2 AmrThresholds3
AmrThresholds4 AmrThresholds5 AmrThresholds6
AmrThresholds7, AmrThresholds1 + AmrHysteresis1 AmrThresholds2
+ AmrHysteresis2 AmrThresholds3 + AmrHysteresis3
AmrThresholds4 + AmrHysteresis4 AmrThresholds5 + AmrHysteresis5
AmrThresholds6 + AmrHysteresis6 AmrThresholds7 +
Description
AmrHysteresis7
Managed Object
BSC
The value rage is 0 to 63 in modes 1, 2, 3, 4, 5, 6 and 7.
0: 0.0 dB
1: 0.5 dB
2: 1.0 dB
...
63: 31.5 dB
Unit
0.5 dB
Default Value
Default Value
Configuration Reason
Generally, you do not have to adjust the setting of this parameter unless
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrHysteresis
2-197
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Hysteresis of AMR
Abbreviation
AmrHysteresis
3GPP Name
hysteresis
3GPP Reference
45.009
This parameter includes seven elements: AmrHysteresis1,
AmrHysteresis2, AmrHysteresis3, AmrHysteresis4, AmrHysteresis5,
AmrHysteresis6, and AmrHysteresis7, which meet the following
requirements:
AmrThresholds1 + AmrHysteresis1 AmrThresholds2 + AmrHysteresis2
AmrThresholds3 + AmrHysteresis3 AmrThresholds4 +
AmrHysteresis4 AmrThresholds5 + AmrHysteresis5 AmrThresholds6
Description
Managed Object
BSC
2-198
SJ-20100524164252-017|2011-07-28 (R1.4)
15: 7.5 dB
Unit
0.5 dB
Default Value
[3, 4, 3, 5, 5, 5, 6]
Default Value
Configuration Reason
The default value keeps proper differences among the thresholds of rate
increases and decreases, avoiding frequent adjustments and ensuring
timely adjustments.
By checking the frequency of rate adjustments, you can decide whether
this parameter is set properly. When the rate is adjusted too frequently,
you can set the parameter to a higher value.
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrThresholds
This parameter includes seven elements: AmrHysteresis1,
AmrHysteresis2, AmrHysteresis3, AmrHysteresis4, AmrHysteresis5,
AmrHysteresis6, and AmrHysteresis7, which meet the following
Relationship
requirements:
AmrThresholds1 + AmrHysteresis1 AmrThresholds2 + AmrHysteresis2
AmrThresholds3 + AmrHysteresis3 AmrThresholds4 +
AmrHysteresis4 AmrThresholds5 + AmrHysteresis5 AmrThresholds6
+ AmrHysteresis6 AmrThresholds7 + AmrHysteresis7
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-199
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
IsAmrICM
3GPP Name
3GPP Reference
45.009
This parameter decides which one, the coding mode specified in
Startmode or the default initial coding mode specified in the protocol
45.009, is used as the initial AMR speech coding mode.
When one mode is used, the corresponding rate is used as the initial
coding mode.
When two or three modes are used, the lowest rate is used as the
initial coding mode.
When four modes are used, the second lowest rate is used as the initial
coding mode.
When interface A is in IP mode, this parameter is not used. The initial
coding mode depends on IpaAMRStartMode in the system control
Description
parameters.
Managed Object
BSC
Unit
None
Default Value
Start-mode codec
Default Value
Configuration Reason
In the default mode, the initial coding mode can be set as needed.
Generally, you can set this parameter to "Initial codec mode", that is, the
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]AmrStartMode
Relationship
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-200
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Start mode
Abbreviation
AmrStartMode
3GPP Name
Start Mode
3GPP Reference
44.018
Description
Managed Object
BSC
When four of the eight bits of the parameter AmrFullAcs are set to No,
the value range is 1 to 4.
When five of the eight bits of the parameter AmrFullAcs are set to No,
the value range is 1 to 3.
When six of the eight bits of the parameter AmrFullAcs are set to No,
the value range is 1 to 2.
When seven of the eight bits of the parameter AmrFullAcs are set to
No, the value range is 1.
When the eight bits of the parameter AmrFullAcs are all set to No, the
value range is null.
The value range is described as follows:
1: The coding mode with the lowest code rate is selected as the initial
coding mode.
2: If there is more than one coding mode, the coding mode with the
second lowest code rate will be selected.
3: If there are more than two coding modes, the coding mode with the
third lowest code rate will be selected.
4: If there are more than three coding modes, the coding mode with the
Unit
None
Default Value
Default Value
Setting the coding mode with the lowest code rate can ensure good
Configuration Reason
High initial rates can be used in cells that have good radio network
Adjustment Suggestion
conditions.
Change Mode
Offline
Related features
2-201
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]AmrHarfAcs
[BSC]IsAmrlCM
When four of the eight bits of this parameter are set to No, the value
range is 1 to 4.
When five of the eight bits of this parameter are set to No, the value
range is 1 to 3.
When six of the eight bits of this parameter are set to No, the value
Relationship
range is 1 to 2.
When seven of the eight bits of this parameter are set to No, the value
range is 1.
When the eight bits of this parameter are all set to No, the value range is
null.
AmrStartMode is valid only when IsAmrlCM is set to "Start-mode codec".
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsAmrNscb
3GPP Name
3GPP Reference
44.018
This parameter decides whether to disable the AMR noise control
function at the MS side, that is, whether to suppress the background
noise and keep the original voice quality. Noise suppression is a function
at the MS side.
No: Noise suppression enabled.
Description
Managed Object
BSC
1: Yes; 0: No
2-202
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
quality.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Cn
Abbreviation
Cn
3GPP Name
None
3GPP Reference
None
2-203
SJ-20100524164252-017|2011-07-28 (R1.4)
CS4.
Managed Object
BSC
0..255
Step: 1
Unit
None
Default Value
85
Default Value
Configuration Reason
A small parameter value makes it easy to fulfill the criterion for increasing
the coding scheme level.
A large parameter value is recommended to ensure that the increase of
coding scheme level is only allowed when the BLER is low. In this case,
the increasing of coding scheme level can improve the indexes relevant
to GPRS service throughput (not EDGE).
Change Mode
Offline
Related features
None
2-204
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.11.2 Nn (Nn)
Full Name
Nn
Abbreviation
Nn
3GPP Name
None
3GPP Reference
None
This parameter is a counter used as a criterion for decreasing the
channel coding level. It is used on the RLC/MAC layer of BRP.
Being different from CS channels, for which only one coding scheme
can be used, GPRS data blocks can use four channel-coding schemes
(CS-1 to CS-4). The data rates corresponding to these four coding
schemes (CS-1, CS-2, CS-3, and CS-4) are 9.05 kbps, 13.4 kbps, 15.6
kbps, and 21.4 kbps. The lower-level coding scheme provides higher
error correction capability and lower data throughput.
User can choose different coding modes for each timeslot or even each
TBF. In the GPRS data transport process, the network should select
appropriate coding modes in a dynamic manner depending on the
requirement for data rate and the radio transmission quality to achieve
the maximum radio throughput.
The coding mode with stronger anti-interference capability (that is, low
level coding mode) must be used when the radio transmission quality
is poor. Decrease the coding scheme by one level when the count of
lost continuous data blocks reaches Xn[n-2]% of Nn[n-2] data blocks
on the TBF (uplink and downlink), for which the coding scheme CSn
Description
(2n4) is used.
2-205
SJ-20100524164252-017|2011-07-28 (R1.4)
BSC
0..255
Step: 1
Unit
None
Default Value
20
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.11.3 Xn (Xn)
Full Name
Xn
Abbreviation
Xn
3GPP Name
None
2-206
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the threshold used as a criterion for decreasing
the channel coding level. It is used on the RLC/MAC layer of BRP.
Being different from CS channels, for which only one coding scheme
can be used, GPRS data blocks can use four channel-coding schemes
(CS-1 to CS-4). The data rates corresponding to these four coding
schemes (CS-1, CS-2, CS-3, and CS-4) are 9.05 kbps, 13.4 kbps, 15.6
kbps, and 21.4 kbps. The lower-level coding scheme provides higher
error correction capability and lower data throughput.
User can choose different coding modes for each timeslot or even each
TBF. In the GPRS data transport process, the network should select
appropriate coding modes in a dynamic manner depending on the
requirement for data rate and the radio transmission quality to achieve
the maximum radio throughput.
The coding mode with stronger anti-interference capability (that is, low
level coding mode) must be used when the radio transmission quality
is poor. Decrease the coding scheme by one level when the count of
lost continuous data blocks reaches Xn[n-2]% of Nn[n-2] data blocks
on the TBF (uplink and downlink), for which the coding scheme CSn
(2n4) is used.
The subscripts 1, 2, and 3 correspond to three parameters for coding
scheme switching between CS1 and CS2, CS2 and CS3, and CS3 and
Description
CS4.
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
25
Default Value
Configuration Reason
Adjustment Suggestion
scheme level can be decreased when the BLER is high, preventing too
low transmission rate caused by the delay of coding scheme adjustment.
The in-time adjustment of coding scheme can reduce the GPRS TBF
drop rate and improve the indexes relevant to GPRS service throughput
(not EDGE).
Change Mode
Offline
2-207
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
N3101
3GPP Name
N3101
3GPP Reference
Description
T3169 expires.
Managed Object
BSC
9...255
Unit
None
Default Value
50
Default Value
The default value is set to reduce the number of exception TBF releases
Configuration Reason
caused by the overflow of N3101 and thus improve the network quality.
2-208
SJ-20100524164252-017|2011-07-28 (R1.4)
The smaller the parameter value is, the higher tolerance on uplink
exception the network has, and the higher the probability of exception
uplink TBF release is. If the parameter value is too large, the network
still allocates uplink resources to the MS because the uplink block
receiving failure is caused by the MS itself, which results in the waste
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
N3103
3GPP Name
N3103
3GPP Reference
2-209
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
0...255
Unit
None
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
0
2-210
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
sage
Abbreviation
N3105
3GPP Name
N3105
3GPP Reference
Description
Managed Object
BSC
0...255
Unit
None
Default Value
15
Default Value
Configuration Reason
2-211
SJ-20100524164252-017|2011-07-28 (R1.4)
The smaller the parameter value is, the higher tolerance on uplink
exception the network has, and the higher the probability of exception
downlink TBF release is. If the parameter value is too small, the network
still allocates radio resources to the MS because the network fails to
Configuration Rule and
Adjustment Suggestion
some actions of the MS, which results in the waste of system resources.
Adjust the value of N3105 appropriately according to the actual situation
of the network (for example, radio interface quality, transmission link
quality, and the factor of the MS itself) to reduce the number of exception
TBF releases caused by N3105 overflow.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
NACC support
Abbreviation
NACCSupport
3GPP Name
NACC
3GPP Reference
2-212
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]CCNActive
[Cell]SIStatusInd
[Cell]CCNSupport
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-213
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
NMO
3GPP Name
NMO
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates which of the following three network operation
modes is used.
Network Operation Mode 1: The network sends a CS paging message to
the GPRS-attached MS through the same channel as the GPRS paging
channel (that is, packet paging channel or CCCH paging channel), or
through the GPRS service channel when a packet data channel has
been allocated to the MS. When this network operation mode is used,
the MS only needs to supervise one paging channel.
Network operation mode 1 shall be used when PBCCH is configured,
and Gs interface shall be configured when network operation mode 1
is used.
Network operation mode 2: The network sends a CS paging message to
the GPRS-attached MS through CCCH paging channel, which is also
used for GPRS paging. That means the MS only needs to supervise the
CCCH paging channel, through which the CS paging message is sent
even a packet data channel has already been allocated to the MS.
Network operation mode 3: The network sends a CS paging message
to the GPRS-attached MS through the CCCH paging channel, and
sends a GPRS paging message through a packet paging channel (if a
packet paging channel exists in the cell), or through the CCCH paging
channel too. That means the MS must supervise two paging channels
(if a packet paging channel exists in the cell) for receiving a CS paging
Description
Managed Object
BSC
Network operation mode 1, Network operation mode 2, Network operation
mode 3
Unit
None
Default Value
Default Value
Configuration Reason
2-214
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
YES
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PagCoordination
3GPP Name
BSS_PAGING_COORDINATION
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the cells in the BSC support CS paging
coordination. As specified in the protocol 04.60.12.24, this parameter is
broadcasted in GPRS CELL OPTIONS through SI13, PSI1, and PSI13
messages. It is invalid when NMO is 1.
Paging coordination allows the network to send a CS paging message
through the PACCH used by PS services to the MS in PS transmission
Description
state.
Managed Object
BSC
1: Yes; 0: No
2-215
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
account when enabling the function. Disable this function if the drop of
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsStatelliteGB
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the BSC supports transmission over
Description
Managed Object
BSC
1: Yes; 0: No
2-216
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsWindowExpend
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the RLC sliding window mechanism is
used. If this mechanism is adopted, the EDGE TBF is allowed to enlarge
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
2-217
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The default value indicates that the window size is not enlarged in the
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TBF_EST
3GPP Name
TBF_EST
3GPP Reference
tocol"
2-218
SJ-20100524164252-017|2011-07-28 (R1.4)
Some MSs that cannot support this function well (especially Blackberry
mobile phones and emulational mobile phones) may fail to access the
network due to improper TBF establishment process when this function
is enabled in them.)
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
is still needed from the last uplink block in the released uplink TBF. If
data transmission is needed, the MS can immediately re-establish an
uplink TBF. Enable or disable this function according to the support
capability of individual MSs.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SIGNAL_EUTBF
3GPP Name
None
2-219
SJ-20100524164252-017|2011-07-28 (R1.4)
tocol"
This parameter indicates whether the extended uplink TBF is supported
for a signalling TBF. This switch is valid when the switch of extended uplink TBF is enabled. The signalling TBF refers to a TBF established for
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
The value of this switch is set according to the actual network situation.
And the MS must support the extended uplink TBF mode for enabling
this function.
Set this parameter according to the need of using the extended uplink
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-220
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SigTBFMaxCode
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter limits the highest encoding mode of signallings in the case
of upper-layer signalling transmission, for example, the transmission of
Description
Managed Object
BSC
MCS1, MCS2, MCS3, MCS4, MCS5, MCS6, MCS7, MCS8, and MCS9
Unit
None
Default Value
MCS6
Default Value
Configuration Reason
guarantee.
Determine the highest encoding mode for the signalling TBF according
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PocSupport
3GPP Name
None
3GPP Reference
None
This parameter indicates whether a POC user applies for a POC dedicated channel. If a mobile phone supports the Push to talk Over Cellular
(POS) function, it can be used as a two way radio. A user can talk to
another user or a group when the corresponding key is pressed on the
Description
mobile phone.
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The default value depends on the actual requirement for POC service
Configuration Reason
in the network.
Set this parameter based on the requirement for POC service in the
network. If special processing is needed for POS service, set the other
functions relevant to POS service.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PocAttSelt_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the highest-order encoding mode that can be
Description
Managed Object
BSC
Unit
None
Default Value
CS3
Default Value
Set the default value on the condition that the stability of POS
Configuration Reason
transmission is ensured.
Set the highest order encoding mode according to the radio quality in
the network on the condition that the stability of POS transmission is
ensured.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PocSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PocAttSelt_1
2-223
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the highest-order encoding mode that can be
Description
Managed Object
BSC
MCS1..MCS9
Unit
None
Default Value
MCS6
Default Value
Set the default value on the condition that the stability of POS
Configuration Reason
transmission is ensured.
Set the highest order encoding mode according to the radio quality in
the network on the condition that the stability of POS transmission is
ensured.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PocSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSCAPATHS_UL
3GPP Name
None
2-224
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the upper limit of users sharing uplink POC
service.
When POC dedicated channels are configured, this parameter indicates
the maximum number of POC users that can be accessed to the uplink
channel of each POC dedicated channel. No more POS users can
access the uplink channel of a POC dedicated channel once the number
of POC users accessing the downlink channel reaches the parameter
Description
value.
Managed Object
BSC
2..6
Step: 1
Unit
Count
Default Value
Default Value
Set the default value on the condition that the transmission rate is
Configuration Reason
Set the maximum number of users sharing the POC dedicated channel
on the condition that the rate of POC transmission is ensured according
to the POC service feature in the network.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PocSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-225
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSCAPATHS_DL
3GPP Name
None
3GPP Reference
None
This parameter indicates the upper limit of users sharing downlink POC
service.
When POC dedicated channels are configured, this parameter indicates
the maximum number of POC users that can be accessed to the
downlink channel of each POC dedicated channel. No more POS users
can access the downlink channel of a POC dedicated channel once
the number of POC users accessing the downlink channel reaches the
Description
parameter value.
Managed Object
BSC
2..6
Step: 1
Unit
Count
Default Value
Default Value
Set the default value on the condition that the transmission rate is
Configuration Reason
Set the maximum number of users sharing the POC dedicated channel
on the condition that the rate of POC transmission is ensured according
to the POC service feature in the network.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PocSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-226
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSUTRANCCOSupp
3GPP Name
Internal
3GPP Reference
None
During PS handover or reselection, the SGSN can use the information
unit Service UTRAN CCO in a PS Handover Request message, a Create
BSS PFC message, or a DL UnitData PDU message to notify the BSC to
enable the 2G/3G reselection priority control or not, for example, prefer
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]CCOStrategy
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
2-227
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LLCTranSupport_0~LLCTranSupport_15
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the BSC supports the transfer of
LLC frame. When the MS reselects a cell, the LLC frames cached in
the source cell need to be transferred to the target cell to ensure the
continuity of downlink data after the cell reselection. Set this parameter
depending on the value of SAPI. SAPI=1 indicates GMM signalling.
SAPI=3, 5, 9, or 11 indicates user data. Generally, the transfer of LLC
frame is enabled for user data, that is, in the case of SAPI=3, 5, 9, or 11.
The following describes the meaning of SAPI value, that is, the indicator
of service SAP.
Reserved 1 GPRS mobility management LLGMM
2 TOM2 TOM2
3 User data 3 LL3
4 Reserved 5 User data 5 LL3
6 Reserved 7 SMS LLSMS
8 TOM8 TOM8
9 User data 9 LL9
10 Reserved 11 User data 11 LL11
12 Reserved 13 Reserved 14 Reserved -
Description
15 Reserved -
Managed Object
BSC
1: Yes; 0: No
Unit
None
2-228
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_10
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
2-229
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]LLCTranSupport_0~LLCTranSupport_15
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_16
3GPP Name
None
3GPP Reference
None
This parameter indicates the longest time period during which the
BSSGP instance can be kept alive after the instance at the radio interface
is released. During a cell reselection, the old BSSGP instance can be
kept alive for some time. If the MS does not get access to a new cell
after the allowable alive time, the old BSSGP instance will be released.
The parameter value 0 indicates that the BSSGP instance will not be
cached. The parameter value 60000 indicates that the life time of
SGSN (PduLifeTime) is used as the time limit for keeping the instance
alive. The other parameter value indicates the smaller one between the
Description
Managed Object
BSC
2-230
SJ-20100524164252-017|2011-07-28 (R1.4)
0..60000
Value Range and Step
Step: 1
Unit
10 ms
Default Value
500
Default Value
Set the default value in consideration of the time needed for cell
Configuration Reason
reselection and the time for TBF establishment of the MS. If the cell
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSRouteByNSVC
3GPP Name
Internal
3GPP Reference
None
2-231
SJ-20100524164252-017|2011-07-28 (R1.4)
therefore the IPGB board cannot detect the route status of its NSVC.
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
boards, each connecting to a router or switch; and the SGSN has only
one remote destination IP address.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-232
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSUlPwrCtlInEsta
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the BSS writes the uplink power control
information in the IMMEDIATE ASSIGNMENT message after receiving a
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Set the parameter value to 1 if the power control is needed for all
uplink data blocks during the TBF process when uplink power control
is required on site.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]UlPwCtrl
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-233
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BVCFlowCtrl
3GPP Name
None
3GPP Reference
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
The default value depends on the cell flow control function at the Gb
Configuration Reason
interface.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
2-234
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MSFlowCtrl
3GPP Name
None
3GPP Reference
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Set the default value in consideration of the cell flow control granularity.
Adjustment Suggestion
Change Mode
Offline
Related features
2-235
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FlowCtrlMode
3GPP Name
None
3GPP Reference
Description
Managed Object
BSC
1..3
Step: 1
Unit
None
Default Value
2-236
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FlowCtrlMode1Para
3GPP Name
None
3GPP Reference
Description
this parameter.
Managed Object
BSC
1..100
Step: 1
2-237
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
rate impacts the transmission of downlink data when the default value
is used, increase the parameter value in the case of uncontinuous
transmission or decrease the parameter value in the case of too fast
transmission.
Change Mode
Offline
Related features
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FlowCtrlMode2Para
3GPP Name
None
3GPP Reference
2-238
SJ-20100524164252-017|2011-07-28 (R1.4)
When the flow control mode 2 is selected, the BSC reports flow control parameters according to the maximum traffic supported by the cell, which is
calculated from the number of configured channels. The maximum traffic
of a cell equals to the product of the number of channels and the maximum traffic supported by each channel. This parameter indicates the
Description
maximum traffic supported by each channel. The traffic unit is 100 bps.
Managed Object
BSC
10..1000
Step: 1
Unit
100 bps
Default Value
214
Default Value
Configuration Reason
rate impacts the transmission of downlink data when the default value
is used, increase the parameter value in the case of uncontinuous
transmission or decrease the parameter value in the case of too fast
transmission.
Change Mode
Offline
Related features
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BVCFlowCtrlRMin
3GPP Name
None
3GPP Reference
Description
to too small leak rate. The unit of this parameter is 100 bps.
Managed Object
BSC
10..300
Step: 1
Unit
100 bps
Default Value
80
Default Value
Configuration Reason
rate impacts the transmission of downlink data when the default value
is used, increase the parameter value in the case of uncontinuous
transmission or decrease the parameter value in the case of too fast
transmission.
Change Mode
Offline
Related features
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-240
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MSFlowCtrlRMin
3GPP Name
None
3GPP Reference
Description
to too small leak rate. The unit of this parameter is 100 bps.
Managed Object
BSC
10..300
Step: 1
Unit
100 bps
Default Value
80
Default Value
Configuration Reason
rate impacts the transmission of downlink data when the default value
is used, increase the parameter value in the case of uncontinuous
transmission or decrease the parameter value in the case of too fast
transmission.
Change Mode
Offline
Related features
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-241
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PFCFlowCtrl
3GPP Name
PFC-FC
3GPP Reference
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
The default value is set according to the function support status in the
Configuration Reason
To enable or disable the PFC flow control function, adjust the status
of this switch in consideration of the adjustment at the CN side at the
same time.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-242
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_2_0
3GPP Name
None
3GPP Reference
None
This parameter is a coefficient used to calculate the size of the BVC leak
bucket. By changing the parameter value, that is, changing the size of
BVC leak bucket, the flow control offset can be adjusted.
Description
Managed Object
BSC
10..20000
Unit
None
Default Value
3000
Default Value
Configuration Reason
The default value is set according to the default flow control period.
Set this parameter according to the flow control in the CN. If the default
Change Mode
Offline
Related features
None
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
Impact on service
0
2-243
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->BVC Flow Control
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Coefficient of MS bucket
Abbreviation
Info_2_16
3GPP Name
None
3GPP Reference
None
This parameter is a coefficient used to calculate the size of the MS leak
bucket. By changing the parameter value, that is, changing the size of
MS leak bucket, the flow control offset can be adjusted.
Description
Managed Object
BSC
10..20000
Unit
None
Default Value
300
Default Value
Configuration Reason
The default value is set according to the default flow control period.
Set this parameter according to the flow control in the CN. If the default
Change Mode
Offline
Related features
None
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
0
2-244
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_9
3GPP Name
CBL
3GPP Reference
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
The default value is set according to the support status of the CN. If the
CN supports the report of CBL, enable this function to report the CBL
to the SGSN through a flow control message.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]BVCFlowCtrl
[BSC]MSFlowCtrl
[BSC]PFCFlowCtrl
Relationship
Related Interfaces
Gb
Impact on Equipment
2-245
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ChlReqRejBmp
3GPP Name
None
3GPP Reference
None
This parameter indicates the FUC flow control level.
When the FUC flow control level is 0, the relevant parameters cannot
Description
be modified.
Managed Object
BSC
Level: 0..10
Unit
None
[Level 0, Level 1, Level 2, Level 3, Level 4, Level 5, Level 6, Level 7, Level
Default Value
Default Value
Configuration Reason
Set the FUC flow control level in consideration of the flow control type.
Adjust the flow control policy by setting the percentages of different flow
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
2-246
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Emergency Call
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the emergency calls
corresponding to an FUC flow control level.
Description
Managed Object
BSC
Unit
Default Value
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Default Value
For this service type, emergency calls have the highest priority. Flow
Configuration Reason
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
2-247
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Call Rebuilt
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the re-established calls
corresponding to an FUC flow control level.
Description
Managed Object
BSC
Unit
Default Value
[0, 50, 75, 100, 100, 100, 100, 100, 100, 100, 100]
Default Value
For this service type, re-established calls have a relatively lower priority.
Configuration Reason
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
2-248
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Call Response
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the call responses
corresponding to an FUC flow control level.
Description
Managed Object
BSC
Unit
Default Value
Default Value
succeed. However, if this service type is set to a high flow control level,
Configuration Reason
it should be under flow control. The service type has a relatively higher
priority, so you should put it under flow control as late as possible.
2-249
SJ-20100524164252-017|2011-07-28 (R1.4)
Generally, you do not have to modify this parameter and the default
value is recommended. When you set the parameter, you should set the
values of the 11 levels (level 0 to level 10) in ascending order. By doing
Configuration Rule and
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.14.5 Calling
Full Name
Calling
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the calling services
corresponding to an FUC flow control level.
Description
Managed Object
BSC
Unit
Default Value
2-250
SJ-20100524164252-017|2011-07-28 (R1.4)
succeed. However, if this service type is set to a high flow control level,
Configuration Reason
it should be under flow control. The service type has a relatively higher
priority, so you should put it under flow control as late as possible.
Generally, you do not have to modify this parameter and the default
value is recommended. When you set the parameter, you should set the
values of the 11 levels (level 0 to level 10) in ascending order. By doing
so, you can decide how fast this service type is put under flow control.
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Location Update
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the location updates
corresponding to an FUC flow control level.
Description
Managed Object
BSC
2-251
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
Default Value
Configuration Reason
For this service type, location update failures have the biggest effect on
the network. Therefore, location updates should have higher priority
than calling or called services and should be put under flow control later.
Generally, you do not have to modify this parameter and the default
value is recommended. When you set the parameter, you should set the
values of the 11 levels (level 0 to level 10) in ascending order. By doing
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
GPRS Access
Abbreviation
None
3GPP Name
None
3GPP Reference
None
2-252
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
Unit
Default Value
Default Value
Configuration Reason
For this service type, location update failures have relatively smaller
effect on the network. Therefore, you can put this type of services under
flow control earlier.
Generally, you do not have to modify this parameter and the default
value is recommended. When you set the parameter, you should set the
values of the 11 levels (level 0 to level 10) in ascending order. By doing
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.14.8 Restore
Full Name
Restore
Abbreviation
None
2-253
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the percentage of the reserved services
corresponding to an FUC flow control level.
Description
Managed Object
BSC
Unit
Default Value
[0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0]
Default Value
Configuration Reason
so, you can decide how fast this service type is put under flow control.
Adjustment Suggestion
In the same level of all service types, you can know the proportion of
flow control for this service type as compared with that for other service
types. In each level, the higher the value is, the higher the proportion of
the service will be under flow control.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-254
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates a channel request rejection bitmap established
by the FUC. The bitmap is used to determine whether to reject an
access after flow control is started.
Each bit in the bitmap indicates whether to admit the access to a channel
for this reason. The value "1" means rejection and the value "0" means
Description
permission.
Managed Object
BSC
None
Unit
Digit
Default Value
None
Default Value
No default value is required. The only requirement is that the value you
Configuration Reason
Adjustment Suggestion
adjustment is required.
Change Mode
Offline
Related features
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-255
SJ-20100524164252-017|2011-07-28 (R1.4)
PFC support
Abbreviation
PFCSupport
3GPP Name
PFC
3GPP Reference
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
To enable or disable the PFC function, adjust the status of this switch in
Adjustment Suggestion
Change Mode
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
2-256
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
YES
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
R99 Ind
Abbreviation
R99Ind
3GPP Name
None
3GPP Reference
details.
Managed Object
BSC
Unit
None
Default Value
R99
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
YES
2-257
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EnRadioStu
3GPP Name
3GPP Reference
Description
value of 0x04.
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
2-258
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
[BSC]GBMsgSndInd_0
[BSC]GBMsgSndInd_1
Relationship
This functional switch is valid only when the RadioStatus send switch in
GBMsgSndInd is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
YES
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.4 RS (RS)
Full Name
RS
Abbreviation
RS
3GPP Name
Internal
3GPP Reference
None
This parameter is the weight of uplink throughput at Gb interface. It is used
for dynamic Abis adjustment. During dynamic Abis resource allocation,
the resources are allocated by the quota that is the weight sum of several
items, including uplink throughput at Gb interface, downlink throughput at
Gb interface, the number of EGPRS MS access attempts, the number of
high bandwidth requests, the maximum bandwidth usage, GPRS carrier
rate, and EDGE carrier rate. All items are granted with a weight depending
on their importance. All the weights, RS, RR, RA, RM, RB, RG, and RE,
Description
Managed Object
BSC
2-259
SJ-20100524164252-017|2011-07-28 (R1.4)
0..100
Value Range and Step
Step: 1
Unit
Default Value
12
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
caused by Abis channel congestion is not great, use the default value.
Adjustment Suggestion
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately decrease the parameter value
after making sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.5 RR (RR)
Full Name
RR
Abbreviation
RR
3GPP Name
Internal
3GPP Reference
None
2-260
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
12
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
caused by Abis channel congestion is not great, use the default value.
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately decrease the parameter value
after making sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-261
SJ-20100524164252-017|2011-07-28 (R1.4)
2.15.6 RA (RA)
Full Name
RA
Abbreviation
RA
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the weight of the number of EGPRS MS access
attempts.
During dynamic
Abis resource allocation, the resources are allocated by the quota that
is the weight sum of several items, including uplink throughput at Gb
interface, downlink throughput at Gb interface, the number of EGPRS
MS access attempts, the number of high bandwidth requests, the
maximum bandwidth usage, GPRS carrier rate, and EDGE carrier rate.
All items are granted with a weight depending on their importance. All
the weights, RS, RR, RA, RM, RB, RG, and RE, fulfills the relation of
Description
RS+RR+RA+RM+RB+RG+RE=100.
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
caused by Abis channel congestion is not great, use the default value.
Adjustment Suggestion
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately decrease the parameter value
after making sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
2-262
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.7 RM (RM)
Full Name
RM
Abbreviation
RM
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the weight of the number of high bandwidth
requests.
During dynamic
Abis resource allocation, the resources are allocated by the quota that
is the weight sum of several items, including uplink throughput at Gb
interface, downlink throughput at Gb interface, the number of EGPRS
MS access attempts, the number of high bandwidth requests, the
maximum bandwidth usage, GPRS carrier rate, and EDGE carrier rate.
All items are granted with a weight depending on their importance. All
the weights, RS, RR, RA, RM, RB, RG, and RE, fulfills the relation of
Description
RS+RR+RA+RM+RB+RG+RE=100.
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
14
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
caused by Abis channel congestion is not great, use the default value.
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately decrease the parameter value
after making sure that enough Abis resources are available.
Change Mode
Offline
Related features
2-263
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.8 RB (RB)
Full Name
RB
Abbreviation
RB
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the weight of the amount of highest bandwidth. It is used for dynamic Abis adjustment. During dynamic Abis
resource allocation, the resources are allocated by the quota that is
the weight sum of several items, including uplink throughput at Gb
interface, downlink throughput at Gb interface, the number of EGPRS
MS access attempts, the number of high bandwidth requests, the
maximum bandwidth usage, GPRS carrier rate, and EDGE carrier rate.
All items are granted with a weight depending on their importance. All
the weights, RS, RR, RA, RM, RB, RG, and RE, fulfills the relation of
Description
RS+RR+RA+RM+RB+RG+RE=100.
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
2-264
SJ-20100524164252-017|2011-07-28 (R1.4)
caused by Abis channel congestion is not great, use the default value.
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately decrease the parameter value
after making sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.9 RG (RG)
Full Name
RG
Abbreviation
RG
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the weight of GPRS carrier rate. It is used for
dynamic Abis adjustment. During dynamic Abis resource allocation, the
resources are allocated by the quota that is the weight sum of several
items, including uplink throughput at Gb interface, downlink throughput at
Gb interface, the number of EGPRS MS access attempts, the number of
high bandwidth requests, the maximum bandwidth usage, GPRS carrier
rate, and EDGE carrier rate. All items are granted with a weight depending
on their importance. All the weights, RS, RR, RA, RM, RB, RG, and RE,
Description
Managed Object
BSC
2-265
SJ-20100524164252-017|2011-07-28 (R1.4)
0..100
Value Range and Step
Step: 1
Unit
Default Value
15
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
TBF link setup failures caused by Abis channel congestion is not great.
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately increase the parameter value
according to the actual number of configured GPRS carriers after making
sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.15.10 RE (RE)
Full Name
RE
Abbreviation
RE
3GPP Name
Internal
3GPP Reference
None
2-266
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the weight of EDGE carrier rate. It is used for
dynamic Abis adjustment. During dynamic Abis resource allocation, the
resources are allocated by the quota that is the weight sum of several
items, including uplink throughput at Gb interface, downlink throughput at
Gb interface, the number of EGPRS MS access attempts, the number of
high bandwidth requests, the maximum bandwidth usage, GPRS carrier
rate, and EDGE carrier rate. All items are granted with a weight depending
on their importance. All the weights, RS, RR, RA, RM, RB, RG, and RE,
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
35
Default Value
Set this parameter according to the common traffic model, such as uplink
Configuration Reason
TBF link setup failures caused by Abis channel congestion is not great.
When the number of TBF link setup failures caused by Abis channel
congestion is great, you can appropriately increase the parameter value
according to the actual number of configured EDGE carriers after making
sure that enough Abis resources are available.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-267
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_1_8
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow dynamic Abis resource
management.
If yes, Abis resources will be allocated to PS services according to the set
quota when being requested. In this case, each cell sharing the resource
pool will be allocated with a quota and the quotas add up to 100. The
quota is calculated according to several statistics, each of which is given
an importance-based weight. Such weights include RS, RR, RA, RM,
RB, RG, and RE. Such statistics include number of cell carriers, number
of packet accesses, uplink and downlink traffic of packet transmission,
and number of EGPRS MS requests. If these statistics change, the
quota will be re-calculated every five seconds and the database will
Description
allocate Abis timeslots to all cells for PS services according to the quota.
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
Yes
This parameter is a special functional switch. Enabling this switch will
allow inter-cell dynamic adjustments of Abis resources in the resource
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
2-268
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_4_0
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the uplink Fast Ack/Nack Reporting
(FANR) function is supported. If the network and the MS support the
function at the same time, the MS can carry the receiving information
of downlink radio blocks in uplink radio blocks. In this way, the network
can get the receiving situation of downlink radio blocks more quickly and
then speed up the retransmission of downlink radio blocks that were not
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This function is not in commercial use in this version. The default value
Adjustment Suggestion
is recommended.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]INFO1_4_0
Relationship
Related Interfaces
Um
2-269
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_4_1
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the downlink Fast Ack/Nack Reporting
(FANR) function is supported. If the network and the MS support the function at the same time, the MS can carry the receiving information of uplink
radio blocks in downlink radio blocks. In this way, the network can get the
receiving situation of uplink radio blocks more quickly and then speed up
the retransmission of uplink radio blocks that were not correctly received.
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This function is not in commercial use in this version. The default value
Adjustment Suggestion
is recommended.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]INFO1_4_1
Relationship
Related Interfaces
Um
2-270
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
DLDC support
Abbreviation
Info_4_2
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the downlink dual-carrier function is
supported.
The downlink dual carrier function enables a terminal to receive the
carriers of two GERANs with different frequencies (or different MAIO
values in the case of frequency hopping). This function, allowing the
allocation of multiple timeslots to multiple carriers, can be regarded as
a natural extension of multi-slot technology. The downlink dual carrier
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This function is not in commercial use in this version. The default value
Adjustment Suggestion
is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
2-271
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RTTI support
Abbreviation
Info_4_3
3GPP Name
Internal
3GPP Reference
None
This parameter indicates that the Reduced Transmission Time Interval
(RTTI) function is supported.
RTTI is relative to BTTI. Basic Transmission Time Interval (BTTI) allows
a radio block to be transmitted in four consecutive bursts on a channel,
that is, a radio block is transmitted in 20ms. RTTI allows a radio block
to be transmitted in two consecutive bursts on each of two channels
(PDCH-pair), that is, a radio block is transmitted in 10ms. RTTI is a
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This function is not in commercial use in this version. The default value
Adjustment Suggestion
is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
2-272
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
EGPRS2-A support
Abbreviation
Info_4_4
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether EGPRS2-A is supported.
EGPRS2-A is the implementation of EGPRS2 in phase two. In this
phase, 16QAM, 32QAM, and Turbo code are used, QPSK and 1.2 times
the symbol rate are not used, and two new modulation coding modes,
DAS and UAS, are introduced. EGPRS2-A is a function provided in
Description
EDGE evolution.
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This function is not in commercial use in this version. The default value
Adjustment Suggestion
is recommended.
Change Mode
Offline
Related features
None
2-273
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]EGPRS2AInitAttSelt_0
[Cell]EGPRS2AInitAttSelt_1
[Cell]EGPRS2AInitAttSelt_2
[Cell]EGPRS2AInitAttSelt_3
[Cell]InitAttachExch_2
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_4_6
3GPP Name
None
3GPP Reference
None
This parameter indicates whether EGPRS is prior to GPRS. If this
function is enabled, that is, EGPRS is prior to GPRS, the number
of blocks allocated to EGPRS and GPRS services will be adjusted
according to the weight of EGPRS when EGPRS and GPRS services
share the same channel.
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
2-274
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
EGPRS and GPRS services share the same channel. Enable or disable
this switch depending on the requirement on site.
Change Mode
Offline
Related features
None
Related Parameters
None
If this function is supported, the number of blocks allocated to EGPRS
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_4_7
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the weight for allocating blocks to EGPRS
services. When EGPRS is prior to GPRS, the BSC determines the
number of blocks allocated to EGPRS according to this weight.
When the parameter value is 0, no block will be allocated to EGPRS
services. When the parameter value is 100, no block will be allocated
Description
to GPRS services.
Managed Object
BSC
0..100
Step: 1
Unit
None
2-275
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
60
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]Info_4_6
[BSC]Info1_7_5
[BSC]Info1_7_6
This parameter is only valid when Info_4_6 is enabled. When Info_4_6
Relationship
and Info1_7_5 are enabled at the same time, Info1_7_6 takes effect
prior to this parameter.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AssPreemptstrategy
3GPP Name
Internal
3GPP Reference
None
2-276
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
For the 15 levels of priority, the value range is Only forced handover, First
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-277
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoPreemptstrategy
3GPP Name
Internal
3GPP Reference
None
This parameter decides the preemption strategy in handovers when there
are no available channels. Its value corresponds to 15 levels of priority
(1 to 15), which are defined by the parameter Priority in the assignment
Description
Managed Object
BSC
For the 15 levels of priority, the value range is Only forced handover, First
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-278
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
AssForcedHoTry
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the maximum number of attempted forced
handovers when there are no available channels in the cell during an
assignment. After a forced handover is started, if one of the following
three events happens and the maximum number is not reached, more
forced handovers can be attempted:
(1) The user whose services are handed over forcedly fails to request
for channels in its adjacent cells.
(2) The forced handover fails.
(3) The user whose services are handed over forcedly fails to release
Description
Managed Object
BSC
Priority: 1..15; Value range: 1.0.5
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-279
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForcedHoTry
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the maximum number of attempted forced
releases when there are no available channels in the cell during a
handover. After a forced handover is started, if one of the following three
events happens and the maximum number is not reached, more forced
handovers can be attempted:
(1) The user whose services are handed over forcedly fails to request
for channels in its adjacent cells.
(2) The forced handover fails.
(3) The user whose services are handed over forcedly fails to release
Description
Managed Object
BSC
Priority: 1..15; Value range: 1.0.5
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
2-280
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AssForcedRelTry
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the maximum number of attempted forced releases when there are no available channels in the cell during an assignment. After a forced release is started, if the user fails to release the
channel in ForceRelWait and the maximum number is not reached, more
Description
Managed Object
BSC
Priority: 1..15; Value range: 1.0.3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
2-281
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForcedRelTry
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the maximum number of attempted forced releases when there are no available channels in the cell during a handover.
After a forced release is started, if the user fails to release the channel in
ForceRelWait and the maximum number is not reached, more forced re-
Description
Managed Object
BSC
Priority: 1..15; Value range: 1.0.3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
0
2-282
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->EMLPP Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AssPreempTimer
3GPP Name
Internal
3GPP Reference
None
This parameter decides the time period in which preemptions (forced
handovers or releases) can be initiated when there are no available
channels in the cell during an assignment. If the duration expires,
services must queue (The queuing period includes the preemption time)
and no more forced handovers or releases will be initiated.
Start: The assignment triggers a preemption, that is, attempted forced
handovers or releases begin.
Stop: A channel is accessed.
Description
Managed Object
BSC
Priority: 1..15; Value range: 25.0.130
Step: 1
Unit
100 ms
Default Value
40
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]RmsT11
[BSC]AssPreempTimer
2-283
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoPreempTimer
3GPP Name
Internal
3GPP Reference
None
This parameter decides the time period in which preemptions (forced
handovers or releases) can be initiated when there are no available
channels in the cell during a handover. If the duration expires, services
must queue (The queuing period includes the preemption time) and no
more forced handovers or releases will be initiated.
Start: The handover triggers a preemption, that is, attempted forced
handovers or releases begin.
Stop: A channel is accessed.
Description
Managed Object
BSC
Priority: 1..15; Value range: 25.0.130
Step: 1
Unit
100 ms
Default Value
30
Default Value
Configuration Reason
Adjustment Suggestion
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]RmsTqho
[BSC]HoForceRelTimer
At the same priority, RmsTqho must be higher than HoPreempTimer.
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AssForceRelTimer
3GPP Name
Internal
3GPP Reference
None
If there are no available channels in the cell during an assignment and
both forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated during the assignment.
Stop: A channel is accessed.
Description
Managed Object
BSC
Priority: 1..15; Value range: 20..125
Step: 1
2-285
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
100 ms
Default Value
30
Default Value
The default value includes the time required to access a channel through
Configuration Reason
forced release.
For high-priority users, you can set this parameter to a lower value for
Adjustment Suggestion
earlier forced releases if you have enabled the forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]AssPreempTimer
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForceRelTimer
3GPP Name
Internal
3GPP Reference
None
2-286
SJ-20100524164252-017|2011-07-28 (R1.4)
If there are no available channels in the cell during a handover and both
forced handover and forced release are allowed, forced handovers
will be attempted first. If no channel is accessed, no more forced
handovers will be done after the timer expires. Instead, forced releases
will be attempted. This parameter decides when to attempt such forced
releases.
Start: A forced handover is initiated.
Stop: A channel is accessed.
Description
Managed Object
BSC
Priority: 1..15; Value range: 20.0.125
Step: 1
Unit
100 ms
Default Value
25
Default Value
The default value includes the time required to access a channel through
Configuration Reason
forced release.
For high-priority users, you can set this parameter to a lower value for
Adjustment Suggestion
earlier forced releases if you have enabled the forced release function.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]HoPreempTimer
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-287
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AssForceHoInterval
3GPP Name
Internal
3GPP Reference
None
This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced handover is initiated during the
assignment.
Stop: Forced releases are attempted after the timer expires.
Description
At expiry: Another search for the forced handover target will be done.
Managed Object
BSC
Priority: 1..15; Value range: 5.0.20
Step: 1
Unit
100 ms
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-288
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoForceHoInterval
3GPP Name
Internal
3GPP Reference
None
This parameter decides the waiting time before the next target search if
the forced handover target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced handover is initiated.
Stop: Forced releases are attempted after the timer expires.
Description
At expiry: Another search for the forced handover target will be done.
Managed Object
BSC
Priority: 1..15; Value range: 5.0.20
Step: 1
Unit
100 ms
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-289
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AssForceRelInterval
3GPP Name
Internal
3GPP Reference
None
This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during an assignment.
Start: No target is found after a forced release is initiated during the
assignment.
Stop: The timer for preemption expires.
Description
At expiry: Another search for the forced release target will be done.
Managed Object
BSC
Priority: 1..15; Value range: 5.0.20
Step: 1
Unit
100 ms
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-290
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoForceRelInterval
3GPP Name
Internal
3GPP Reference
None
This parameter decides the waiting time before the next target search
if the forced release target cannot be found and there are no available
channels in the cell during a handover.
Start: No target is found after a forced release is initiated during the
handover.
Stop: The timer for preemption expires.
Description
At expiry: Another search for the forced release target will be done.
Managed Object
BSC
Priority: 1..15; Value range: 5.0.20
Step: 1
Unit
100 ms
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-291
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RmsT11
3GPP Name
T11
3GPP Reference
48.008
This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during an assignment. If
no resource is obtained during the time period, the assignment fails.
Start: No channel is available for the assignment and the assignment
queues.
Stop: A channel is accessed.
At expiry: The channel allocation will fail and an assignment failure
Description
Managed Object
BSC
Step: 1
Unit
100 ms
Default Value
60
Default Value
The default value ensures that there is enough time for channel releases
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]AssPreempTimer
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-292
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RmsTqho
3GPP Name
Tqho
3GPP Reference
48.008
This parameter decides the maximum time to wait in queue for resources
when there are no available channels in the cell during a handover. If no
resource is obtained during the time period, the handover fails.
Start: No channel is available for the handover and the handover queues.
Stop: A channel is accessed.
Description
Managed Object
BSC
Priority: 1..15; Value range: 26..150
Step: 1
Unit
100 ms
Default Value
50
Default Value
The default value ensures that there is enough time for channel releases
Configuration Reason
The handover queuing time should not be too long because subsequent
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]HoPreempTimer
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-293
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
QueueIndAss
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow queuing during an assignment
or carry out the assignment according to the cell settings when there are
Description
Managed Object
BSC
Queue allowed when assign; Queue forbidden when assign; According
to the cell
Unit
None
Default Value
Default Value
Configuration Reason
When the traffic is high, enabling this function can relieve channel
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]PreemptionIndAss
[BSC]ForcedHolndAss
[Cell]QueueInd_0
When either PreemptionIndAss or ForcedHolndAss is set to "allowed",
QueueIndAss must be set to "allowed".
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-294
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
QueueIndHo
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow queuing during a handover or
carry out the handover according to the cell settings when there are no
Description
Managed Object
BSC
Queue allowed when handover, Queue forbidden when handover, Ac-
Unit
None
Default Value
Default Value
There are many target cells for handovers and the time interval between
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]PreemptionIndHo
[BSC]ForcedHolndHo
[Cell]QueueInd_1
When either PreemptionIndHo or ForcedHolndHo is set to "allowed",
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-295
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PreemptionIndAss
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow forced releases during an assignment or carry out the assignment according to the cell settings when
Description
Managed Object
BSC
Forced release allowed when assign, Forced release forbidden when as-
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]QueueIndAss
[Cell]PreemptionInd_0
When PreemptionIndAss is set to "allowed", QueueIndAss must be set
Relationship
to "allowed".
When PreemptionIndAss is set to "According to the cell", QueueIndAss
must be set to "allowed" or "According to the cell".
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-296
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PreemptionIndHo
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow forced releases during a handover or carry out the handover according to the cell settings when there
Description
Managed Object
BSC
Forced release allowed when handover, Forced release forbidden when
Unit
None
Default Value
Default Value
Configuration Reason
you should enable the forced release function. If the forced release
function will be used by HoPreemptstrategy during the handover, you
should enable this switch.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]QueueIndHo
[Cell]PreemptionInd_1
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-297
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ForcedHolndAss
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow forced handovers during an assignment or carry out the assignment according to the cell settings when
Description
Managed Object
BSC
Forced handover allowed when assign, Forced handover forbidden when
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]QueueIndAss
[Cell]ForcedHoInd_0
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-298
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ForcedHolndHo
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to allow forced handovers during a handover or carry out the handover according to the cell settings when there
Description
Managed Object
BSC
Forced handover allowed when handover, Forced handover forbidden
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]QueueIndHo
[Cell]ForcedHoInd_1
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-299
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ForceRelWait
3GPP Name
Internal
3GPP Reference
None
This parameter decides the time to wait for resources after a forced
release. If a resource is obtained within this period, no more forced
releases will be initiated and the assignment will stop queuing. If not,
more forced releases will be initiated or the assignment will still queue
for resources, depending on parameter settings. The parameter should
be set according to the time required for a complete forced release.
Start: A forced release is initiated and the assignment waits for channel
releases.
Stop: The user that initiates the forced release accesses a channel.
At expiry: More forced releases will be initiated or the assignment will
Description
Managed Object
BSC
10..40
Step: 1
Unit
100 ms
Default Value
25
Default Value
The default value is larger than the time required for a complete channel
Configuration Reason
release.
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-300
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
ForceHoWait
3GPP Name
Internal
3GPP Reference
None
This parameter decides the time to wait for resources after a forced
handover. If a resource is obtained within this period, no more forced
handovers or releases will be initiated and the assignment will stop
queuing. If not, more forced handovers or releases will be initiated or
the assignment will still queue for resources, depending on parameter
settings. The parameter should be set according to the time required
for a complete handover.
Start: A forced handover is initiated and the assignment waits for
channel releases.
Stop: The user that initiates the forced release accesses a channel.
At expiry: More forced handovers or releases will be initiated or the
assignment will still queue for resources, depending on parameter
Description
settings.
Managed Object
BSC
10..40
Step: 1
Unit
100 ms
Default Value
25
Default Value
The default value is larger than the time required for a complete
Configuration Reason
handover.
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
2-301
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LowestPriority
3GPP Name
Internal
3GPP Reference
None
During searches for the targets of forced handovers or releases, if the priorities of the targets are not higher than this priority, these targets will be
considered to have the lowest priorities and can be the targets of forced
handovers or releases. No more searches will be done. In this way, the
number of times of searches is reduced. The value "1" indicates the high-
Description
est priority.
Managed Object
BSC
1..15
Step: 1
Unit
None
Default Value
14
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
None
2-302
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LongCallDuration
3GPP Name
Internal
3GPP Reference
None
During searches for the targets of forced handovers or releases, if the call
duration of the targets is larger than this parameter, these targets will be
considered to have enough long calls and can be the targets of forced
handovers or releases. No more searches for the target with the longest
call duration will be done. In this way, the number of times of searches is
Description
reduced.
Managed Object
BSC
0..65535
Step: 1
Measurement report period (converted to multiple common measurement
Unit
Default Value
50
Default Value
Configuration Reason
specific needs.
You can set this parameter to a higher value to ensure that the users
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
2-303
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ForceHoPenalty
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the time period in which the target of forced
handover cannot be a target any more after the forced handover fails.
Start: The target fails to carry out the handover and release the channel.
Stop: None.
Description
Managed Object
BSC
0..255
Step: 1
Measurement report period (converted to multiple common measurement
Unit
Default Value
60
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
2-304
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EmergServicelPrio
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the priority of emergency calls. Those calls
whose priorities are higher than the parameter are emergency calls. The
Description
Managed Object
BSC
1..15
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
emergency calls.
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
2-305
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AccConfigSelect
3GPP Name
None
3GPP Reference
None
This parameter is a user access control switch based on the priority of
SIM cards.
Through the NMS, you can totally configure four sets of access
parameters. This parameter decides whether to enable the user access
control based on the priority of SIM cards and which set of parameters
are used.
0: Disable the user access control function.
1: Enable the first ACC configuration data as user access control
parameters.
2: Enable the second ACC configuration data as user access control
parameters.
3: Enable the third ACC configuration data as user access control
parameters.
4: Enable the fourth ACC configuration data as user access control
Description
parameters.
Managed Object
BSC
2-306
SJ-20100524164252-017|2011-07-28 (R1.4)
parameters.
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FirstBarredClass_0FirstBarredClass_3
3GPP Name
None
2-307
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the starting priority of the SIM cards that are
rejected to access the system. Starting from this priority, the SIM cards
in the window size BarredClassWindows will be rejected to access the
system.
Description
Managed Object
BSC
0..9
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
You can set this parameter according to the priority of SIM cards to be
Adjustment Suggestion
rejected.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BarredClassWindows_0BarredClassWindows_3
3GPP Name
None
2-308
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the priority window size of SIM cards under
flow control.
For the SIM cards of priority 0 to 10, selective flow control is carried
out. Starting from the SIM priority FirstBarredClass, the SIM cards
in the window size BarredClassWindows within the time period
BarredTimeStep will be rejected to access the system. This process will
repeat after the time period expires.
For example, if you set FirstBarredClass, BarredTimeStep, and
BarredClassWindows to 1, 30, and 3 respectively, the SIM cards of
priority 1, 2, and 3 will be rejected to access the system at first. After 30
seconds, the SIM cards of priority 2, 3, and 4 will be rejected but the SIM
cards of priority 1 will be allowed. After another 30 seconds, the SIM
Description
Managed Object
BSC
1..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value ensures that the MSs of one priority is barred at a time.
The higher the value is, the more MSs will be barred at the same time.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-309
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BarredTimeStep_0BarredTimeStep_3
3GPP Name
None
3GPP Reference
None
This parameter indicates the sliding speed of the window in which
accesses are rejected. The users of different priorities in a window size
within each time period will be rejected to access the system. After the
time period expires, the window slides.
Description
Managed Object
BSC
1..3600
Step: 1
Unit
Default Value
30
Default Value
Configuration Reason
The higher the value is, the longer the rejection will last. You should set
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-310
SJ-20100524164252-017|2011-07-28 (R1.4)
Access Control
Abbreviation
AccessControl
3GPP Name
3GPP Reference
Description
Managed Object
BSC
0..9, 11..15
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
If you want the MSs of a priority to access the cell, you should set Cn to
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-311
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmEnable
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the resource alerting function of UPPB
is enabled. The resource availability of UPPB is measured by the
availability of each DSP resource on the UPPB board. The measurement
indexes include the memory application failure rate of DSP, the utilization
ratio of the MAC instance and the BSSGP instance, the utilization ratio of
the mac-tlli index table and the bssgp-tlli index table, and the utilization
Description
Managed Object
BSC
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
DSP resources.
Set the parameter value to 0 when the UPPB resource alerting function
is not needed. Set the parameter value to 1 when the UPPB resource
alerting function is needed.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
2-312
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmThs_0
3GPP Name
Internal
3GPP Reference
None
This parameter is an alarm threshold of memory application failure rate of
UPPB DSP. When the memory application failure rate is higher than this
Description
Managed Object
BSC
1..100
Step: 1
Unit
Default Value
15
Default Value
The default value is set for effectively monitoring the memory application
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
This parameter is valid only when the UppbResAlarmEnable switch is
Relationship
Related Interfaces
None
2-313
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmThs_1
3GPP Name
Internal
3GPP Reference
None
This parameter is an alarm threshold of MAC instance utilization. When
the MAC instance utilization is higher than this threshold, a threshold
crossing alarm is reported.
Description
Managed Object
BSC
30..100
Step: 1
Unit
Default Value
90
Default Value
The default value is set for effectively monitoring the MAC instance
Configuration Reason
utilization.
When the parameter value is small, a threshold crossing alarm will be
reported when the MAC instance utilization is not high. If the parameter
value is large, a threshold crossing alarm will be reported only when the
MAC instance utilization is very high. A value equal to or larger than 60
is recommended to prevent frequent alarm reporting.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
2-314
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2.18.4 Alarm threshold of use ratio for bssgp instance and tlli index
(UppbResAlarmThs_2)
Full Name
Alarm threshold of use ratio for bssgp instance and tlli index
Abbreviation
UppbResAlarmThs_2
3GPP Name
Internal
3GPP Reference
None
This parameter is an alarm threshold of BSSGP instance and index
table utilization. When the BSSGP instance and index table utilization is
higher than this threshold, a threshold crossing alarm is reported.
Description
Managed Object
BSC
30..100
Step: 1
Unit
Default Value
90
Default Value
The default value is set for effectively monitoring the BSSGP instance
Configuration Reason
utilization.
When the parameter value is small, a threshold crossing alarm will
2-315
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
This parameter is valid only when the UppbResAlarmEnable switch is
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmThs_3
3GPP Name
Internal
3GPP Reference
None
This parameter is an alarm threshold of MAC-tlli index table utilization.
When the mac-tlli index table utilization is higher than this threshold, a
threshold crossing alarm is reported.
Description
Managed Object
BSC
30..100
Step: 1
Unit
Default Value
90
Default Value
The default value is set for effectively monitoring the MAC-tlli index
Configuration Reason
table utilization.
2-316
SJ-20100524164252-017|2011-07-28 (R1.4)
be reported when the MAC-tlli index table utilization is not high. If the
parameter value is large, a threshold crossing alarm will be reported only
when the MAC-tlli index table utilization is very high. A value equal to or
larger than 60 is recommended to prevent frequent alarm reporting.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
This parameter is valid only when the UppbResAlarmEnable switch is
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmThs_4
3GPP Name
Internal
3GPP Reference
None
This parameter is an alarm threshold of channel instance utilization.
When the channel instance utilization is higher than this threshold, a
threshold crossing alarm is reported.
Description
Managed Object
BSC
30..100
Step: 1
2-317
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
90
Default Value
The default value is set for effectively monitoring the channel instance
Configuration Reason
utilization.
When the parameter value is small, a threshold crossing alarm will
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
This parameter is valid only when the UppbResAlarmEnable switch is
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UppbResAlarmThs_5
3GPP Name
Internal
3GPP Reference
None
2-318
SJ-20100524164252-017|2011-07-28 (R1.4)
BSC
30..100
Step: 1
Unit
Default Value
95
Default Value
Configuration Reason
utilization.
When the parameter value is small, a threshold crossing alarm will be
Change Mode
Offline
Related features
None
Related Parameters
[BSC]UppbResAlarmEnable
[BSC]OverThsDuration
This parameter is valid only when the UppbResAlarmEnable switch is
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-319
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
OverThsDuration
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the duration of threshold crossing alarms of
indexes relevant to UPPB resources, including memory application
failure rate, MAC instance utilization, BSSGP instance and index table
utilization, mac-tlli index table utilization, channel instance utilization,
and TS instance utilization. It is used for jitter-prevention processing. On
one hand, a threshold crossing alarm is reported only when the duration
of an index value that exceeds the preset threshold range, reaches the
value of this parameter. On the other hand, the threshold crossing
alarm is cleared only when the duration that the index value is within the
Description
Managed Object
BSC
60..7200
Step: 1
Unit
Default Value
600
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
2-320
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TAterWaitConn
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for an SCCP CONNECT
CONFIRM message from the iTC in an SCCP connection establishment
process at the Ater interface.
Start: A SCCP CONNECT REQUEST message is sent to the iTC.
Stop:
The SCCP connection number corresponding to the service is invalid
when the iTC resource request of the service is processed.
An SCCP CONNECT CONFIRM message is received from the iTC.
At expiry: A DISCONNECT REQUEST message with the cause value of
Description
0x13 (normal) is sent to the SCCP to end the service at the Ater interface.
Managed Object
BSC
5..20
Step: 1
Unit
100 ms
Default Value
15
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
2-321
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitAterRes
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for a RESOURCE REQUEST
ACK message from the iTC in the resource request process at the Ater
interface.
Start: A RESOURCE REQUEST message is sent to the iTC of the Ater
interface.
Stop: The iTC of the Ater interface returns a RESOURCE AVAILABLE
message to the service.
At expiry: Release the service.
Description
Managed Object
BSC
10..30
Step: 1
Unit
100 ms
Default Value
20
Default Value
Two seconds are enough for the iTC to complete the resource
Configuration Reason
Change Mode
Offline
Related features
2-322
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TAterWaitRel
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for a RESOURCE RELEASE ACK
message from the iTC in a resource release process at the Ater interface.
Start: A RESOURCE RELEASE message is sent to the iTC of the Ater
interface.
Stop: A RESOURCE RELEASE ACK message is received from the iTC.
At expiry: Release the SCCP connection.
Description
Managed Object
BSC
20..50
Step: 1
Unit
100 ms
Default Value
20
Default Value
Configuration Reason
Change Mode
Offline
2-323
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TAterMoniterHO
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to supervise a handover process at the
Ater interface when an external iTC is used.
Start: When the service requests for circuit resource again from the Ater
interface during the handover process.
Stop:
When an Ater interface handover execution message is received from
the old CS instance.
When an Ater interface resource release request message is received
from the new CS instance.
At expiry: The Ater interface sends a release command to the CS
service, and sends an iTC resource release message to the iTC.
Description
Managed Object
BSC
70..170
Step: 1
Unit
100 ms
Default Value
120
2-324
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TWaitAterResAck
3GPP Name
None
3GPP Reference
None
This parameter is a timer used to wait for the response from the iTC
when the iBSC requests resources from the iTC for handover.
Start: A CS service instance sends a RESOURCE REQUEST message
to the iTC.
Stop:
A RESOURCE REQUEST ACK message is received from the iTC.
A RESOURCE REQUEST FAILURE message is received from the iTC.
At expiry: Clear the number of the new RAN CS process corresponding
to the service process, or set the new RAN CS service instance
corresponding to the service process as non-existent.
Description
Managed Object
BSC
2-325
SJ-20100524164252-017|2011-07-28 (R1.4)
5..25
Value Range and Step
Step: 1
Unit
100 ms
Default Value
15
Default Value
1.5 seconds are enough for the iTC to complete the resource assignment
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TAterCicBlk
3GPP Name
None
3GPP Reference
None
2-326
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is a timer for circuit blocking at the Ater interface, which
is used to wait for a BLOCKING ACK message or a UNBLOCKING
ACK message from the iTC.
Start: The BSC sends a single circuit blocking message to the iTC.
Stop: The BSC receives a single circuit blocking acknowledgement
message from the iTC.
At expiry: If the number of timer expiries does not exceed five, the BSC
sends the single circuit blocking message to the iTC again, and the
timer is restarted. When the number of timer expiries exceeds five, the
BSC terminates the instance.
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-327
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TAterBlkCicGrp
3GPP Name
None
3GPP Reference
None
This parameter is a timer for circuit group blocking at the Ater interface,
which is used to wait for a BLOCKING CIRCUIT GROUP ACK message
or a UNBLOCKING CIRCUIT GROUP ACK message from the iTC.
Start: The BSC sends a circuit group blocking message to the iTC.
Stop: The BSC receives a circuit group blocking acknowledgement
message from the iTC.
At expiry: If the number of timer expiries does not exceed five, the BSC
sends the circuit group blocking message to the iTC again, and the timer
is restarted. When the number of timer expiries exceeds five, the BSC
terminates the instance.
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
2-328
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
TAterRstCic
3GPP Name
None
3GPP Reference
None
This parameter is a timer for circuit reset at the Ater interface, which is
used to wait for a RESET CIRCUIT ACK message from the iTC.
Start: The BSC sends a circuit reset message to the iTC.
Stop: The BSC receives a circuit reset acknowledgement message from
the iTC.
At expiry: If the number of timer expiries does not exceed five, the
BSC sends the circuit reset message to the iTC again, and the timer is
restarted. When the number of timer expiries exceeds five, the BSC
terminates the instance.
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
2-329
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TAterRst
3GPP Name
None
3GPP Reference
None
This parameter is a timer for the reset of the Ater interface, which is used
to wait for a RESET ACK message from the iTC.
Start: The BSC sends a RESET message to the iTC.
Stop: The BSC receives a RESET ACK message from the iTC.
At expiry: If the number of timer expiries does not exceed five, the BSC
sends the RESET message to the iTC again. When the number of timer
expiries reaches five, the BSC sets the number of no response times of
the opposite end to 0, and waits for the completion of the reset.
Description
Managed Object
BSC
60..150
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
0
2-330
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TITCRst
3GPP Name
None
3GPP Reference
None
This parameter is a reset delay timer at the Ater interface, which is used
to delay the global reset for the release of resources.
Start: An Ater interface reset message is received.
Stop: None
At expiry: An Ater reset acknowledgement message is responded to
Description
the iTC.
Managed Object
BSC
30..60
Step: 1
Unit
100 ms
Default Value
40
Default Value
Configuration Reason
of the iTC.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
0
2-331
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TBlkACic
3GPP Name
None
3GPP Reference
None
This parameter is a timer for blocking A interface circuit at the Ater
interface, which is used to wait for a BLOCKING A CIRCUIT ACK
message or a UNBLOCKING A CIRCUIT ACK message from the iTC.
Start: A circuit maintain request message is received.
Stop: A single circuit blocking acknowledgement message is received.
And a circuit un-equipped message is received.
At expiry: When the number of timer expiries reaches five, the circuit
instance at the Ater interface is terminated. A circuit maintain request
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
2-332
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TBlkACicGrp
3GPP Name
None
3GPP Reference
None
This parameter is a timer for blocking A interface circuit group at the Ater
interface, which is used to wait for a BLOCKING A CIRCUIT GROUP
ACK message or a UNBLOCKING A CIRCUIT GROUP ACK message
from the iTC.
Start: A circuit group maintain request message is received.
Stop: A circuit group blocking acknowledgement message is received.
And a circuit un-equipped message is received.
At expiry: When the number of timer expiries reaches five, the circuit
instance at the Ater interface is terminated. A circuit maintain request
Description
Managed Object
BSC
30..150
Step: 1
Unit
100 ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
2-333
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Ater
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
2-334
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 3
User Label
Abbreviation
UserLabel
3GPP Name
None
3GPP Reference
None
Description
This parameter means the GERAN external cell name for users to identify.
Managed Object
Cell
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
3-1
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->External Cell Config->GERAN External Cell Con-
fig->Basic Property
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
External cell ID
Abbreviation
Geran EcellID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1.0.65535; step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
3-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Cell type
Abbreviation
CellType
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Umbrella cell, Macro Cell, Micro Cell, Micro-micro Cell, Extended Cell
Unit
None
Default Value
Macro Cell
Default Value
Configuration Reason
None
This parameter just indicates the type of external adjacent cells. It does
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-3
SJ-20100524164252-017|2011-07-28 (R1.4)
MCC
Abbreviation
MCC
3GPP Name
None
3GPP Reference
None
A Mobile Country Code (MCC) consists of three decimal digits and is used
Description
to uniquely identify the country where a mobile user (or system) belongs.
Managed Object
Cell
0..999; Step: 1
Unit
None
Default Value
460
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MNC
Abbreviation
MNC
3-4
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
A Mobile Network Code (MNC) consists of three decimal digits and is
used to uniquely identify a specific GSM PLMN in a country (depending
Description
on MCC).
Managed Object
Cell
If MNC3Digits is set to "2 digits", the value range will be 0 to 99.
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]MNC3Digits
If MNC3Digits is set to "2 digits", the MNC can only be two digits long. If
Relationship
MNC3Digits is set to "3 digits", the MCN can only be three digits long.
If MNC3Digits is set to "2 or 3 digits", the MNC can be two or three
digits long.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
FreqBand
3-5
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
FreqBand
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
When the value of DCS1800/PCS1900 supported (FuncExt) is
DCS1800, the value range is GSM900, EXT900, PCS1900, GSM850;
When the value of DCS1800/PCS1900 supported (FuncExt) is
Unit
None
Default Value
GSM900
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
[Cell]BcchArfcn
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
BCCH arfcn
Abbreviation
BcchArfcn
3-6
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Description
This parameter indicates the ARFCN of the BCCH carrier in the cell.
Managed Object
Cell
When FreqBand is set to "GSM900", the value range will be 1 to 124.
When FreqBand is set to "EXT900", the value range will be 0 to 124
and 975 to 1023.
When FreqBand is set to "PCS1900", the value range will be 512 to 810.
When FreqBand is set to "DCS1800", the value range will be 512 to 885.
When FreqBand is set to GSM850, the value range will be 128 to 251.
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
LAC
Abbreviation
LAC
3-7
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Each GSM PLMN is divided into many location areas to locate mobile
stations. Location area codes (LACs) are used to identify different
location areas. LAC is part of LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description
Managed Object
Cell
1..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3.1.9 CI (CI)
Full Name
CI
Abbreviation
CI
3-8
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Network operators must allocate a unique code to each cell in a location
Description
Managed Object
Cell
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
NCC
Abbreviation
NCC
3GPP Name
None
3GPP Reference
None
3-9
SJ-20100524164252-017|2011-07-28 (R1.4)
Network Color Code (NCC) is part of Base Station Identity Code (BSIC)
(BSIC = NCC + BCC). It is used by mobile stations to differentiate adjacent cells that belong to different GSM PLMNs. Generally, neighboring
operators are required to use different NCCs. The parameter relating to
NCC is "NccPermitted". Prohibiting mobile stations to report NCCs in a
cell is a way to prevent the mobile stations from measuring the cell information of related operators. An NCC has three bits and is one of the
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BCC
Abbreviation
BCC
3-10
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Base Station Color Code (BCC) is part of Base Station Identity Code
(BSIC) (BSIC = NCC + BCC). Generally, BCC is used by mobile stations
to differentiate adjacent cells that have the same BCCH carrier frequency
and belong to the same GSM PLMN. In addition, according to GSM specifications, the Training Sequence Code (TSC) of the broadcast control
channel of a cell must be equal to the BCC of the cell. A BCC has three
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
3-11
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PsSupport
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
requirement.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ReselOff_0
3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
Description
Managed Object
Cell
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
3-13
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselOff_1
3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
Description
transmission state.
Managed Object
Cell
3-14
SJ-20100524164252-017|2011-07-28 (R1.4)
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TempOffset_0
3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
3-15
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Unit
dB
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
moving fast. An MS will not choose this cell if the BCCH signal intensity
Adjustment Suggestion
last for less than the PenaltyTime parameter. The parameter can be set
as the maximum value 60 (GSM signal strength is 0 .. 63).
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
3-16
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TempOffset_1
3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
Description
transmission state.
Managed Object
Cell
Unit
dB
3-17
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
moving fast. An MS will not choose this cell if the BCCH signal intensity
Adjustment Suggestion
last for less than the PenaltyTime parameter. The parameter can be set
as the maximum value 60 (GSM signal strength is 0 .. 63).
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PenalTime_0
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
3-18
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..31
Unit
10 s
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
3-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PenalTime_1
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
Description
transmission state.
Managed Object
Cell
0..31
3-20
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
10 s
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HSC exist
Abbreviation
HCS_EXIST_0
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the HCS(Hierarchical Cell Structure)
parameter (HCS priority and HCS signal strength threshold) exists. If this
cell does not use HCS parameters, an MS will ignore HCS parameters
of other cells, then all cells use infinite threshold of HCS signal strength
threshold. This parameter indicates the parameter used during reselec-
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
this parameter "Yes" if the C31 judgment criteria for the priority cell
reselection and signal level threshold are applied. When more than
one cell has the highest priority, C32 judgment criteria should be used
for the cells with a same priority.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HSC exist
Abbreviation
HCS_EXIST_1
3GPP Name
None
3GPP Reference
None
3-22
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
this parameter "Yes" if the C31 judgment criteria for the priority cell
reselection and signal level threshold are applied. When more than
one cell has the highest priority, C32 judgment criteria should be used
for the cells with a same priority.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HCS_THR_0
3-23
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
HCS_THR
3GPP Reference
Description
uring PBCCH.
Managed Object
Cell
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-24
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HCS_THR_1
3GPP Name
HCS_THR
3GPP Reference
Description
sion state.
Managed Object
Cell
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HCS priority
3-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PrioClass_0
3GPP Name
PRIORITY_CLASS
3GPP Reference
Description
Managed Object
Cell
0..7
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
The priority of an HCS cell gets higher with the increase of the parameter
Adjustment Suggestion
value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HCS priority
Abbreviation
PrioClass_1
3-26
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
PRIORITY_CLASS
3GPP Reference
Description
Managed Object
Cell
0..7
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
The priority of an HCS cell gets higher with the increase of the parameter
Adjustment Suggestion
value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
EXC_ACC
3GPP Name
EXC_ACC
3-27
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Usually MSs with SoLSA access authorization are not prevented from
Configuration Reason
staying in a cell.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
CellBarAc2
3GPP Name
CELL_BAR ACCESS_2
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
recommended to be used.
3-29
SJ-20100524164252-017|2011-07-28 (R1.4)
The parameter that controls the cell access forbidden bit can be
configured by network administrator. Usually all cells allows MS access,
so the bit should be set 0. Under special circumstances, a cell is
expected to serve for handover services, then the bit can be set 1 (CBQ
should be 0), as shown in Figure 1.
Figure 1 Diagram of cell access forbidden
Suppose the areaA (the shadowed area) is the busy area (commercial
area in big city). To raise the accessibility of the area with limited
frequency resources, micro-cell coverage can be applied. To lower the
number of times of cross-cell handover when an MS is in high-mobility
state, two layer network concept is applied, that is, setting up a BTS A
Configuration Rule and
Adjustment Suggestion
(the volume can be smaller) which covers the whole area A. Usually MSs
all works in a micro-cell (the cell priority and the reselection parameter
can be configured for implementation). When an MS is in high-mobility
state in a call, it is forced to handover to BTS A. If an MS stays at BTS A
and at the edge of a micro-cell, the MS will not start the cell reselection
procedure because the signal quality of BTS A is much better than that
of the micro-cell BTS. In this case the congestion in the BTS A will
happen because the volume of the BTS A is small. The method to solve
this problem is to set the cell access forbidden parameter to 1, that is,
the MS is forbidden to access the BTS A and only the services can be
handed over into the coverage area of the the BTS A.
Precautions:
The cell access forbidden functional parameter is only used in some
special situations. Usually it is set to 0.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]CellBarAccess
[Cell]CellBarQualify
The parameterr together with CBQ and CBA, determine the cell
reselection priority and cell reselection state, as shown in the table: CBQ
CBA cell reselection priority cell reselection state
No No Normal Normal
No Yes Forbidden Forbidden
Yes No Low Normal
Relationship
3-30
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
LSA ID
Abbreviation
LSA_Id
3GPP Name
LSA ID
3GPP Reference
Description
Managed Object
Cell
0..16777215
Unit
None
Default Value
Default Value
Configuration Reason
None
Adjustment Suggestion
planning.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
3-31
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RAC
Abbreviation
RAC
3GPP Name
None
3GPP Reference
None
Compared with the GSM system that uses location areas to manage a
group of cells, GPRS divides a location area to several routing areas
that are identified by RAI (MCC + MNC + LAC + RAC). When a mobile
station in attach status carries out a cell reselection, it will initiate a
"Routing Area Update" process if the RAI of the new cell is different from
that of the old cell.
The SGSN has the routing area information of the MSs that are in
standby status. Therefore, when packet data or circuit data is transmitted
in the network, the MSs will be paged in the routing area. Cross-SGSN
RAI cannot be used.
Description
Managed Object
Cell
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
3-32
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RxLevAsMin_0
3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
Description
Managed Object
Cell
3-33
SJ-20100524164252-017|2011-07-28 (R1.4)
0..63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Value Range and Step
Step: 1
Unit
None
Default Value
12
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-34
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RxLevAsMin_1
3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
Description
transmission state.
Managed Object
Cell
0..63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
12
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
3-35
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsTxMaxCCH_0
3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
3-36
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
3-37
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
MsTxMaxCCH_1
3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
Description
parameter.
3-38
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..31
Unit
None
Default Value
Default Value
The parameter impacts the PBCCH channel configuration, and C31 and
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-39
SJ-20100524164252-017|2011-07-28 (R1.4)
User Label
Abbreviation
UserLabel
3GPP Name
None
3GPP Reference
None
Description
This parameter means the UTRAN external cell name for users to identify.
Managed Object
Value Range and
Step
Cell
Character string with the maximum length of 40.
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-40
SJ-20100524164252-017|2011-07-28 (R1.4)
External UTRAN ID
Abbreviation
Ec3GID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1..65535; step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CellType3G
3-41
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Description
This parameter indicates the duplex mode of the local UTRAN cell
Managed Object
Cell
FDD, TDD
Unit
None
Default Value
FDD
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
[Cell]Arfcn3G
[Cell]ScCodeCellPara
[Cell]BandWidth3G
[Cell]SyncCaseTSTD
This parameter has effect on the value range of ScCodeCellPara, and
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MCC
Abbreviation
MCC
3-42
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
A Mobile Country Code (MCC) consists of three decimal digits and is used
Description
to uniquely identify the country where a mobile user (or system) belongs.
Managed Object
Cell
0..999; Step: 1
Unit
None
Default Value
460
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MNC
Abbreviation
MNC
3GPP Name
None
3GPP Reference
None
3-43
SJ-20100524164252-017|2011-07-28 (R1.4)
on MCC).
Managed Object
Cell
If MNC3Digits is set to "2 digits", the value range will be 0 to 99.
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]MNC3Digits
If MNC3Digits is set to "2 digits", the MNC can only be two digits long. If
Relationship
MNC3Digits is set to "3 digits", the MCN can only be three digits long.
If MNC3Digits is set to "2 or 3 digits", the MNC can be two or three
digits long.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Arfcn3G
3GPP Name
None
3-44
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
Description
This parameter indicates the frequency range of the adjacent UTRAN cell.
Managed Object
Cell
When CellType3G is set to"FDD", the value range will be 412 to 10838.
When CellType3G is set to "TDD" and BandWidth3G is set to "0(3.84
Mcps)", the value range will be 2112 to 13088.
When CellType3G is set to "TDD" and BandWidth3G is set to "1(1.28
Unit
None
When CellType3G is set to"FDD", the default value will be 412.
When CellType3G is set to "TDD" and BandWidth3G is set to "0(3.84
Mcps)", the default value will be 2112.
When CellType3G is set to "TDD" and BandWidth3G is set to "1(1.28
Default Value
Default Value
Configuration Reason
planning.
Adjustment Suggestion
planning.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
LAC
3-45
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
LAC
3GPP Name
None
3GPP Reference
None
Each PLMN is divided into many location areas to locate mobile stations.
Location area codes (LACs) are used to identify different location
areas. LAC is part of LAI (LAI = MCC + MNC + LAC). One location
area contains multiple cells.
Description
Managed Object
Cell
1..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RNC ID
3-46
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RNC_ID
3GPP Name
None
3GPP Reference
None
This parameter indicates the ID of the RNC to which the adjacent UTRAN
Description
cell belongs.
Managed Object
Cell
0..4095
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
planning.
Adjustment Suggestion
planning.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3.2.9 C ID (C_ID)
Full Name
C ID
Abbreviation
C_ID
3GPP Name
None
3-47
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
Description
Managed Object
Cell
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
planning.
Adjustment Suggestion
planning.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ScCodeCellPara
Scrambling Code(25.213)
3GPP Name
Cell Parameter(25.213)
3GPP Reference
44.018
3-48
SJ-20100524164252-017|2011-07-28 (R1.4)
FDD: The details of FDD can be found in the protocol 3GPP TS25.213.
ScCodeCellPara is a scrambling code used to distinguish the carriers in
the UTRAN/FDD network. Mobile stations measure the main scrambling
code of the downlink CPICH in a cell for handovers or cell reselections.
The scrambling codes are divided into 512 groups, from group 0 to group
511. Each group has one primary scrambling code and 15 secondary
scrambling codes. 511The 512 primary scrambling codes can be divided
into 64 scrambling code sets, each of which has eight scrabbling codes.
TDD: It is a parameter that describes adjacent cells.
When ScCodeCellPara is set to 65535, all cells with the set frequency
Description
Managed Object
parameter and its value range is 0 to 127, and 65535, with a step of 1.
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-49
SJ-20100524164252-017|2011-07-28 (R1.4)
TX diversity indication
Abbreviation
DiverSity
Diversity 44.018\
3GPP Name
Diversity TDD(25.224)
3GPP Reference
44.018
Description
Managed Object
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RAC
Abbreviation
RAC
3-50
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Compared with the GSM system that uses location areas to manage a
group of cells, GPRS divides a location area to several routing areas
that are identified by RAI (MCC + MNC + LAC + RAC). When a mobile
station in attach status carries out a cell reselection, it will initiate a
"Routing Area Update" process if the RAI of the new cell is different from
that of the old cell.
The SGSN has the routing area information of the MSs that are in
standby status. Therefore, when packet data or circuit data is transmitted
in the network, the MSs will be paged in the routing area. .Cross-SGSN
RAI cannot be used.
Description
Managed Object
Cell
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-51
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BandWidth3G
3GPP Name
Bandwidth_TDD(25.331)
3GPP Reference
44.018
When CellType3G is set to "TDD", this parameter appears and can be
Description
Managed Object
Unit
None
Default Value
1 (1.28 Mcps)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SyncCaseTSTD
3-52
SJ-20100524164252-017|2011-07-28 (R1.4)
(25.304, 25.224)
3GPP Reference
44.018
This parameter decides whether to use SyncCase or TSTD. TSTD refers
to time switched transmit diversity. SyncCase refers to synchronization
Description
Managed Object
is "Apply Sync Case". In this case, the value range is Yes and No.
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
3-53
SJ-20100524164252-017|2011-07-28 (R1.4)
3-54
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 4
Cell Parameters
Table of Contents
Basic Parameters 1 ....................................................................................................4-1
Basic Parameters 2 ..................................................................................................4-27
Basic Parameters 3 ..................................................................................................4-61
Optional Parameters ................................................................................................4-85
Cell Selection Parameters ......................................................................................4-103
Service Process Additional Parameters.................................................................. 4-116
System Parameters................................................................................................4-135
Other Parameters...................................................................................................4-152
GPRS Basic Parameters ........................................................................................4-173
GPRS Other Parameters 1 .....................................................................................4-180
GPRS Other Parameters 2 .....................................................................................4-194
GPRS Other Parameters 3 .....................................................................................4-226
GPRS Cell Options Parameters .............................................................................4-261
GPRS NC Survey Parameters................................................................................4-279
GPRS Power Control Parameters ..........................................................................4-290
GPRS Cell Reselection Parameters .......................................................................4-297
GPRS Channel Parameters....................................................................................4-333
PS Handover Parameters.......................................................................................4-352
EDGE Parameters..................................................................................................4-361
User Label
Abbreviation
UserLabel
3GPP Name
None
3GPP Reference
None
Description
This parameter means the cell name that is easy to be recognized by users.
Managed Object
Cell
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4.1.2 Site ID
Full Name
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Site
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
4-2
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
Parameter
Modifying
Version
Parameter
None
Modifying
Detail
None
BSC ID
Abbreviation
BSCID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Value Range and
Step
BSC ID cannot be modified. By default, the value is the same with that
of subnetwork ID.
Cell
1 ~ 4095
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
4-3
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1..24
The maximum value of BtsId for each site type is as follows:
OB06: 3
BS20: 3
BS21: 3
BS21V20: 3
BS30: 3
BS30V12: 3
B8112: 6
M8202: 6
M8206: 6
B8018: 6
S8001: 1
SDR: 24
Unit
None
4-4
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Sorted by practice
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Cell Type
Abbreviation
CellType
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4
0: umbrella cell
1: macro-cell
2: micro-cell
3: pico-cell
4: extended cell
Unit
None
4-5
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MCC
Abbreviation
MCC
3GPP Name
None
3GPP Reference
None
A Mobile Country Code (MCC) is used to uniquely identify the country
where a mobile user (or system) belongs. MCCs are allocated interna-
Description
Managed Object
Cell
Unit
None
Default Value
4-6
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MNC
Abbreviation
MNC
3GPP Name
None
3GPP Reference
None
A Mobile Network Code (MNC) is used to uniquely identify a specific
PLMN in a country (depending on MCC). For example, the code "07" rep-
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
None
4-7
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
If MNC3Digits is set to "2 digits", the MNC can only be two digits long. If
Relationship
MNC3Digits is set to "3 digits", the MCN can only be three digits long.
If MNC3Digits is set to "2 or 3 digits", the MNC can be two or three
digits long.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
LAC
Abbreviation
LAC
3GPP Name
None
3GPP Reference
None
Each GSM PLMN is divided into many location areas to locate mobile
stations. Location area codes (LACs) are used to identify different
location areas. LAC is part of LAI (LAI = MCC + MNC + LAC). One
location area contains multiple cells.
Description
Managed Object
Cell
1..65535
Step: 1
Unit
None
4-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4.1.9 CI (CI)
Full Name
CI
Abbreviation
CI
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..65535
Value Range and Step
Step: 1
Unit
None
Default Value
4-9
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
NCC
Abbreviation
NCC
3GPP Name
None
3GPP Reference
None
NCC is one of the composition parts of Base Station ID Code (BSIC)
(BSIC = NCC + BCC), which is used to enable the MS to distinguish adjacent and different GSM PLMN cells. Usually adjacent operators shall
have different NCCs. The parameter related to NCC is "NccPermitted" of
the cell. By prohibiting MS to report related NCC in the cell, MS is prohibited to measure the cell information of the related operators. Actually,
NCC occupies three bits. NCC is one of the network identification param-
Description
eters.
Managed Object
Cell
0..7
Step: 1
4-10
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BCC
Abbreviation
BCC
3GPP Name
None
3GPP Reference
None
BCC is one of the composition parts of Base Station ID Code (BSIC) (BSIC
= NCC + BCC). Usually BCC is used to enable MS to distinguish adjacent
cells with the same BCCH carrier frequency and belonging to the same
GSM PLMN. In addition, the GSM specifications stipulate that the TSC
(Training Sequence Code) of the broadcast control channel of a cell shall
be equal to the cell BCC. BCC occupies three bits. BCC is one of the
Description
Managed Object
Cell
4-11
SJ-20100524164252-017|2011-07-28 (R1.4)
0..7
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Frequency band
Abbreviation
FreqBand
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
4-12
SJ-20100524164252-017|2011-07-28 (R1.4)
0: PGSM (1..124);
1: EGSM (0..124, 975..1023);
2: DCS1800 (512..885);
4: GSM1900 (512..810);
Value Range and Step
7: GSM850 (128..251)
Unit
None
Default Value
0: PGSM
Default Value
Configuration Reason
It is configured as required.
Change Mode
Offline
Related features
Related Parameters
[BSC]FuncExt
[CellTrx]Frequency
The value of DCS1800/PCS1900 supported (FuncExt) has influence on
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Subcell used
Abbreviation
SubCellUsed
3GPP Name
None
3GPP Reference
None
Description
This parameter indicates whether this cell uses the subcell switch.
4-13
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
[Cell]SubFreqBand
[Cell]SubCellId
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SubFreqBand
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
4-14
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
GSM900
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
[Cell]SubCellUsed
[BSC]FuncExt
If "Subcell used" is set to "Yes", this parameter can be configurable.
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
ARFCN list
Abbreviation
CaArfcnList
3GPP Name
3GPP Reference
None
This parameter provides a list of Absolute Radio Frequency Channel
Description
Numbers (ARFCNs).
4-15
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
The value range of each ARFCN is the same as BCCH. The ARFCN list
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
The ARFCNs in subcell 1 and subcell 2 should comply with the following
constraints:
1) In the case of PGSM900 system,
the CA list contains 124 ARFCNs at most. (A cell has 64 ARFCNs at
most.)
2) In the case of EGSM or DCS1800 system,
if the difference between the maximum ARFCN and the minimum one
is less than 112, the list can contain 112 ARFCNs at most. (A cell has
Relationship
64 ARFCNs at most.)
if the difference between the maximum ARFCN and the minimum one is
less than 128, the list can contain 29 ARFCNs at most.
if the difference between the maximum ARFCN and the minimum one is
less than 256, the list can contain 22 ARFCNs at most.
if the difference between the maximum ARFCN and the minimum one is
less than 512, the list can contain 18 ARFCNs at most.
if the difference between the maximum ARFCN and the minimum one
is equal to or larger than 512, the list can contain 17 ARFCNs at most
when 0 is included, or 16 ARFCNs at most when 0 is not included.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
4-16
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PsSupport
3GPP Name
None
3GPP Reference
None
This parameter indicates whether this cell supports GPRS (EDGE) service.If "GPRS supported" or "EDGE supported" is selected, relevant sub-
Description
Managed Object
Cell
GPRS is not supported, GPRS is supported, EDGE is supported, EG-
Unit
None
Default Value
Default Value
Configuration Reason
GPRS;
For the cell which supports the GPRS and EDGE services, it is set as:
Support EDGE;
For the cell which supports the GPRS , EDGE and EDGE2 services, it is
set as: Support EDGE2.
The V2 80W BTS only supports CS1/2.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-17
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DynaHREnable
3GPP Name
None
3GPP Reference
None
This parameter indicates whether this cell supports dynamic HR. This feature means the system can allocate full rate or half rate channel for the
MS based on cell traffic while the network is allocating channels for the
MS.If the cell channels are congested, the system can allocate half rate
channels, so the period of cell congestion at peak time decreases to the
Description
minimum extent.
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]UseCellDynHRPara
[BSC]DynaHREnable
When this parameter (dynamic HR support indication) is "Yes", the
Relationship
Related Interfaces
None
4-18
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UseCellDynHRPara
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]DynaHREnable
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CBC support
Abbreviation
SmsCbUsed
3GPP Name
None
3GPP Reference
None
CBC service is an important service provided by mobile communication
system, mainly used to distribute information to the mobile subscribers
within certain geographical location area. The difference from P2P sms
service contains: receiver for P2P sms is a specific mobile subscriber,
but receiver for CBC is all mobile subscribers within certain area,
including external subscribers roaming in this area.
This parameter identifies whether this cell supports the function of cell
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
4-20
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HRThs
3GPP Name
None
3GPP Reference
None
When BSC and cell enables dynamic HR functions, and percentage of
TCHF channel used in the cell (the numerator: "TCHF channels occupied + TCHH channel occupied" / "2 + non-blocked static PD channel +
busy dynamic PD channel", the denominator: "all available TCH/H/2" +
"available dynamic and static PDCH channels in current status") exceeds
Description
Managed Object
Cell
1..100
Step: 1
Unit
Default Value
60
4-21
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]AMRHRThs
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
PS busy threshold
Abbreviation
Info_1_16
3GPP Name
None
3GPP Reference
None
If the cell busyness is greater than this threshold, a maximum of one
dynamic TCHF channel of new PS services is allowed to be converted
into PD.Cell busyness is calculated in accordance with the formula: the
numerator: "TCHF channels occupied + TCHH channel occupied" / "2
+ non-blocked static PD channel + busy dynamic PD channel", the denominator: "all available TCH/H/2" + "available dynamic and static PDCH
Description
Managed Object
Cell
1..100
Step: 1
4-22
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
80
Default Value
If over 80% of the channels are occupied, the cell has large traffic. In
Configuration Reason
The smaller the value is, the more the expansion of PS services in the
Adjustment Suggestion
cell is limited.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UseCellAMRParam
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the AMR parameters of the cell are
enabled.
If no, the AMR parameters set in the BSC are preferred.
Description
Managed Object
Cell
No, Yes
Unit
None
4-23
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Enable this switch if you want to set the AMR parameter depending
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CcchConf
3GPP Name
CCCH-CONF
3GPP Reference
3GPP TS 44.018
The common control channel configuration parameter is one of the
system control parameters. In GSM system, CCCH includes Access
Grant Channel (AGCH) and Paging Channel (PCH). It is used to send
access granting (instant assignment) message and paging message.
In each cell, all service channels share CCCH. According to the
configuration of the service channel in the cell and the traffic mode of the
cell, CCCH can be one or more than one physical channel, and CCCH
can share the same physical channel with SDCCH.
The combination mode of the common control channel in a cell
Description
4-24
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0: A basic physical channel used by CCCH . It is not used together
with SDCCH;
1: A basic physical channel used by CCCH. It is used together with
SDCCH;
2: Two basic physical channels used by CCCH. It is not used together
with SDCCH;
4: Three basic physical channels used by CCCH. It is not used together
with SDCCH;
6: Four basic physical channels used by CCCH. It is not used by
SDCCH.
Unit
None
0: A basic physical channel used by CCCH . It is not used together with
Default Value
SDCCH;
Default Value
In most cases there are more than two carrier frequencies in a cell. A
Configuration Reason
area that the cell resides. 0 can be the default value (must be consistent
with the configurations of the public control channels). It is recommended
that this value should be identical for the cells in the same local area.
, TRX 1 2 ,
SDCCH ; TRX 3 4 ,
SDCCH . TRX 4 , .
Change Mode
Offline
Related features
Related Parameters
Relationship
4-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Abis, Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Template file
Abbreviation
None
3GPP Name
None
3GPP Reference
None
Click the Select button, a window pops up. Select the template file in local
path.
Description
Managed Object
Cell
Local files
Unit
None
Default Value
None
None
4-26
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TA Max
Abbreviation
TaMax
3GPP Name
None
3GPP Reference
None
This parameter represents the maximum TA supported by extended carrier frequency. It defines the cell coverage capability. The users with
Description
Managed Object
Cell
When "Cell Type (CellType)" is non-extended, the value range is 0..63;
Step: 1
When "Cell Type (CellType)" is extended, the value range is 0..219;
Step: 1
Unit
None
4-27
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]CellType
[Cell]DistanceThs
When "Cell Type (CellType)" is non-extended, the value range is 0 .. 63;
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
TA MIN
Abbreviation
TaMin
3GPP Name
None
3GPP Reference
None
It indicates the minimum TA accessing the cell. In homocentric circle coverage, this parameter is used with TaAllowed to limit the access of outer
Description
circle cells.
Managed Object
Cell
4-28
SJ-20100524164252-017|2011-07-28 (R1.4)
Step: 1
Unit
None
Default Value
Default Value
The coverage area is not a homocentric circle by default and all users
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Site]INFO1_1
The value of "Cell Type" has influence on the value range and default
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TA allowed
Abbreviation
TaAllowed
3GPP Name
None
3GPP Reference
None
4-29
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
When "Cell Type (CellType)" is non-extended, the value range is 0..63;
Step: 1
When "Cell Type (CellType)" is extended, the value range is 0..219;
Step: 1
Unit
None
When "Cell Type (CellType)" is non-extended, the default value is 63;
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[Site]INFO1_1
The value of "Cell Type" has influence on the value range and default
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CcchLoadIndPrd
4-30
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
3GPP Reference
Description
Managed Object
Cell
1 .. 255
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3212
4-31
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
T3212
3GPP Reference
Description
MATION TYPE3.
Managed Object
Cell
0 .. 255
00: positive infinite, location update is not required;
1: 6 minutes;
2: 12 minutes;
255: 1530 minutes;
Step length: 1
Unit
360 s
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
4-32
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3122
3GPP Name
T3122
3GPP Reference
Description
Managed Object
Cell
0 .. 255
Step: 1
Unit
Default Value
10
Default Value
Setting of the default value is in accordance with user's feel and network
Configuration Reason
resource utilization.
4-33
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MulbandReport
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
Description
parameters.
4-34
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0 .. 3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
4-35
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_2_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the minimum access level of uplink RACH.
When BTS has received a channel request, it will measure the receive
level. If the receiving level is lower than the threshold, this access will be
Description
abandoned.
Managed Object
Cell
4-36
SJ-20100524164252-017|2011-07-28 (R1.4)
90..125
Value Range and Step
Step: 1
Unit
-dBm
Default Value
125
Default Value
Configuration Reason
coverage area will be reduced and the success rate of paging and
Adjustment Suggestion
handover will be lowered. However, the accessibility and the drop rate
will be improved.
Change Mode
Offline
Related features
None
Related Parameters
[Site]INFO1_1
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CcchLoadINDThs_0
3GPP Name
3GPP Reference
4-37
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter specifies a threshold for the RACH load. When the RACH
load of the BTS exceeds this threshold, the BTS periodically sends a
CCCH LOAD INDICATION message to the iBSC until the RACH load deDescription
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
80
Default Value
Configuration Reason
Generally, the RACH is considered very busy when its load reaches 80%.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CcchLoadINDThs_1
3GPP Name
3GPP Reference
4-38
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter specifies a threshold for the PCH load. When the PCH
load of the BTS exceeds this threshold, the BTS periodically sends a
CCCH LOAD INDICATION message to the iBSC until the PCH load deDescription
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
80
Default Value
Configuration Reason
Generally, the PCH is considered very busy when its load reaches 80%.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Tn7Lowerlevel
3GPP Name
None
3GPP Reference
None
4-39
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0 .. 50
Step: 1
Unit
0.2 dB
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Site]INFO1_1
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepeatACCH
3GPP Name
None
3GPP Reference
None
4-40
SJ-20100524164252-017|2011-07-28 (R1.4)
mission function.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
default.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
StartPAPowerOff
3GPP Name
None
3GPP Reference
None
4-41
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Yes, No
Yes: enable
No: disable
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
StartTRXPowerOff
3GPP Name
None
3GPP Reference
None
4-42
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BsRadioLkTmOutForAMRFR
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
45.008
4-43
SJ-20100524164252-017|2011-07-28 (R1.4)
radio link fault. This counter is designed for AMR-FR voice service.
Managed Object
Cell
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64
Unit
None
Default Value
64
Default Value
This parameter can have a big value, so there will be plenty of time
Configuration Reason
restore the normal quality call. When the parameter has a small value,
Adjustment Suggestion
it is difficult to restore the normal quality call and the radio resources
will be released.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-44
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BsRadioLkTmOutForAMRHR
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
45.008
This parameter indicates the maximum value (initial value) of S that is
the counter for AMR-HRvoice service failure. GSM rule specifies that
BTS needs a counter S, which is rendered a value recorded in parameter
BsRadioLkTmout when the call starts. Once BTS fails to decode a correct SACCH message when it should, S will decrease by 1. Once BTS
decodes a correct SACCH message, S is increased by 2. The value of
S cannot exceed BsRadioLkTmout. When S reaches 0, BTS will report
Description
radio link fault. This counter is designed for AMR-HR voice service.
Managed Object
Cell
4, 8, 12, 16, 20, 24, 28, 32, 36, 40 44, 48, 52, 56, 60, 64
Unit
None
Default Value
64
Default Value
This parameter can have a big value, so there will be plenty of time
Configuration Reason
restore the normal quality call. When the parameter has a small value,
Adjustment Suggestion
it is difficult to restore the normal quality call and the radio resources
will be released.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um, Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
4-45
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AmrAdjMode
3GPP Name
None
3GPP Reference
None
This parameter indicates which AMR rate adjustment mode is used. Two
adjustment modes are optional: AMR rapid rate adjustment mode: In
this mode, the adjustment time is controlled by the BTS. Interval-based
rate adjustment: In this mode, the adjustment time is determined by the
configuration in the operation and maintenance center. This parameter
is valid in the case of IPA and E1A.
In the rapid rate adjustment mode, the BTS uses the default adjustment
time, that is, 960 ms. In the interval-based rate adjustment mode, the
BTS uses the adjustment time (unit: 480 ms) configured in the operation
and maintenance center. For example, if the interval parameter is set to
1, the BTS adjusts the rate every 480 ms. If the interval parameter is set
to 2, the BTS adjusts the data rate every 960 ms.
AMR rate adjustment refers to the process that the MS reports CMR
through uplink speech frames to request for the adjustment of downlink
rate according to the calculated downlink C/I (compared with the
threshold). The base station sends CMC through downlink speech
frames to request for the adjustment of uplink rate according to the
calculated uplink C/I (compared with the threshold). When the calculated
C/I reaches the threshold, and the time since the previous adjustment
reaches the adjustment time specified by this parameter, the BTS
accepts the rate adjustment request of CMC and CMR. If the calculated
C/I reaches the threshold, but the adjustment interval does not reach the
adjustment time specified by this parameter, rate adjustment will not be
Description
performed.
Managed Object
Cell
Unit
None
Default Value
4-46
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AmrAdjInterval
3GPP Name
None
3GPP Reference
None
This parameter specifies the interval for AMR codec adjustment. This
parameter is valid when the AmrAdjMode parameter is set to "Intervalbased adjustment mode". Refer to the description of AmrAdjMode for
Description
more information.
Managed Object
Cell
1..50
Step: 1
Unit
480 ms
Default Value
1
4-47
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
adjustment, select the interval-based rate adjustment mode and set the
value of this parameter. The larger the parameter value is, the longer
the adjustment interval is, that is, the slower a rate adjustment is.
Change Mode
Offline
Related features
Related Parameters
[Cell]AmrAdjMode
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HRDfragSupport
3GPP Name
None
3GPP Reference
None
This parameter is a switch for HR channel fragment cleaning-up functions.
Description
Managed Object
Cell
1: Yes
0: No
4-48
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
0: No
Default Value
Configuration Reason
improve the voice quality when a cell that applies dynamic half-rate
enable the HR fragment cleaning. This parameter can be enabled when
needed. The BSC global parameter needs to be turned on, and the
number of handover within a cell will increase.
Change Mode
Offline
Related features
ZGO-03-02-004 HR Concentration
Related Parameters
[BSC]HRDfragSupport
[Cell]Info_0_8
[Cell]Info_1_24
The HR fragment cleaning function can be enabled only when the
following three parameters have been enabled: BSC HRDfragSupport,
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_8
3GPP Name
None
3GPP Reference
None
4-49
SJ-20100524164252-017|2011-07-28 (R1.4)
If the proportion of the idle TCH/F channels in a cell to all the available
service channels is lower than or equal to this threshold, the fragment
cleaning up function will be enabled. The calculation starts when the HR
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
20
Default Value
Configuration Reason
many idle TCH/F channels, and there will be more inner-cell handovers
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-03-02-004 HR Concentration
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-50
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_1_24
3GPP Name
None
3GPP Reference
None
The fragment management is started when the traffic of a cell exceeds
the busy threshold. The calculation starts when the HR channel repack
is caused by release of users. The result is the proportion of the occupied channels (including TCH/H, TCH/F and PDTCH) to all the available
Description
channels in a cell.
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
when the cell is busy, and there will be more inner-cell handovers caused
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-03-02-004 HR Concentration
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
4-51
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HRTsPercentage
3GPP Name
None
3GPP Reference
None
When the ratio of number of HR occupied times slots to the number of
all the service time slots is lower than this threshold, a new HR channel
can be generated. The occupied HR time slots include static HR time
slots and dynamically generated HR time slots.
The parameter can be configured on BSC and BTS. when
UseCellDynHRPara is set to "Yes", HRTsPercentage is used. When
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
50
Default Value
The default start threshold for dynamic HR exceeds 50%. Too many HR
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-52
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Threshold of AMR HR
Abbreviation
AmrHRThs
3GPP Name
None
3GPP Reference
None
When busy timeslot(including TCHF occupied, TCHH/2 occupied,
available PD, and PD channel congested)/general timeslot
(including available TCHF, available TCHH/2, and available PD) >=
AmrHRThs/100, and carrier and cell support AMR, subsequent service
prefers AMR voice rate.
This threshold value can be configured on BSC and BTS, when "User
cell dynamic HR parameter" (UseCellDynHRPara) is yes, AmrHRThs
value configured by cell will be used, otherwise AmrHRThs configured
Description
by BSC is used.
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
50
Default Value
The default value should be smaller than the threshold of AMR HR and it
Configuration Reason
The larger the threshold of this parameter is, the higher the threshold
Adjustment Suggestion
of AMR HR is.
Change Mode
Offline
ZGO-03-02-006 Independent Threshold for Dynamic AMR HR/FR Con-
Related features
version
Related Parameters
[Cell]HRThs
Relationship
4-53
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FRThrHoSupport
3GPP Name
None
3GPP Reference
None
This parameter determines whether the system supports handover from
FR to HR based on load. When the cell load increases, handover can be
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
4-54
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
Abbreviation
HRTFRHOSupport
3GPP Name
None
3GPP Reference
None
This parameter determines whether to support HR-FR handover based
on quality. In the case of poor HR voice quality, the HR-FR handover can
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
When HR-FR handover is required for a cell, enable this switch. Poor
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
4-55
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
Info_0_0
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the TRX starts the function of adjusting
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
output power.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-56
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RRUPowerOff
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
state RRU will shut down part of its function for electricity saving. When
the traffic increases, power on RRU.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-57
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReportCIR
3GPP Name
None
3GPP Reference
None
This parameter indicates whether CIR (C/I value) is included in the measurement report. CIR information can be obtained in "C/I measurement"
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-58
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LapdmL2Cfg
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the Lapdm L2 filling frame fills random
values.
It will be difficult to hack into the system if the random values are applied
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-59
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
NCC permitted
Abbreviation
NccPermitted
3GPP Name
NCC Permitted
3GPP Reference
Description
Managed Object
Cell
0~7
Unit
None
Default Value
0, 1, 2, 3, 4, 5, 6, 7
Default Value
Configuration Reason
requirement.
Change Mode
Offline
Related features
None
4-60
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AvgSlots
3GPP Name
3GPP Reference
Description
used by BTS.
Managed Object
Cell
0 .. 100
Step: 1
Unit
None
Default Value
60
Default Value
Configuration Reason
4-61
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
RachBusyThs
3GPP Name
3GPP Reference
Description
Managed Object
Cell
0 .. 63
00: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
4-62
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
63
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OverloadPrd
3GPP Name
Overload Period
3GPP Reference
Description
Managed Object
Cell
1 .. 255
Step: 1
4-63
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
BA show
Abbreviation
BcchBaInd
3GPP Name
BA ind
3GPP Reference
4-64
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the BA show of BCCH. The adjacent cell list
can be broadcast on BCCH and transferred on SACCH. The adjacent
cell list transferred on BCCH can be different from that on SACCH. When
the MS reports the measurement data of adjacent cell, either BCCH
adjacent cell list or SACCH adjacent cell list will be referred. Therefore,
in order to know which adjacent cell list is referred by the MS, a BA show
is added when the adjacent cell list is transferred on BCCH and SACCH.
When reporting the measurement result, the MS notifies the network side
about the corresponding BA show of the referred adjacent cell list. As a
result, the network side recognizes which adjacent cell list the MS uses.
This parameter describes the BA show value when the adjacent cell list
is transferred on BCCH.In the case of transferring adjacent cell list on
SACCH, the BA show value used is the reverse of the parameter.
0: The value of BA_IND on BCCH (system message 2, 2bis, 2ter) is 0;
the value of BA_IND on SACCH (system message 5, 5bis, 5ter) is 1.
1: The value of BA_IND on BCCH (system message 2, 2bis, 2ter) is 1;
Description
Managed Object
Cell
0, 1
Unit
None
Default Value
Default Value
Configuration Reason
No reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
4-65
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
RxLevAccessMin
3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
Description
be increased.
Managed Object
Cell
4-66
SJ-20100524164252-017|2011-07-28 (R1.4)
0 .. 63
00: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -110 dBm .. -109 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value is set to be a little higher than the MS' sensitivity.
The value can be slightly adjusted based on the actual condition. It
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MRetrans
3GPP Name
Max retrans
4-67
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
times is 1).
Managed Object
Cell
0 .. 3
0: 1 times;
1: 2 times;
2: 4 times;
3: 7 times
Unit
None
Default Value
2(4 times)
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-68
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TxInteger
3GPP Name
Tx_integer
3GPP Reference
Description
Managed Object
Cell
4-69
SJ-20100524164252-017|2011-07-28 (R1.4)
0 .. 15
0: T is 3;
1: T is 4;
2: T is 5;
3: T is 6;
4: T is 7;
5: T is 8;
6: T is 9;
7: T is 10;
8: T is 11;
9: T is 12;
10: T is 14;
11: T is 16;
12: T is 20;
13: T is 25;
14: T is 32;
Value Range and Step
15: T is 50.
Unit
None
Default Value
14
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-70
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MsTxPwrMaxCch
3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
Description
parameters.
Managed Object
Cell
0 .. 31
Step: 1
Unit
None
Default Value
900 M: 5; 1800 M: 0
Default Value
Configuration Reason
4-71
SJ-20100524164252-017|2011-07-28 (R1.4)
The default value is reserved. If the it is set too large, the MS near BTS
will interfere the adjacent channels. If it is too small, the MS at the cell
boundaries will have low access success rate.
Configuration Rule and
Adjustment Suggestion
The principle for setting the parameter value is: Under the precondition
that the MS at the cell boundary is guaranteed with a certain access
success rate, the MS access level should be reduced as much as
possible.Obviously, the larger the cell coverage is, the higher is the
output power level of the MS. Usually, it is recommended to set this
parameter value as 5 (for GSM900MS) and 0 (for GSM1800MS).
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BsPaMframs
3GPP Name
BS_PA_MFRMS
3GPP Reference
3GPP TS45.002
4-72
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
2..9
Step: 1
Unit
None
Default Value
Default Value
This parameter should be set as low as possible and the paging channel
Configuration Reason
the area with large traffic, this parameter should be 6 or 7. In the area
with moderate traffic, this parameter can be set as 4 or 5. For the area
with small traffic, this parameter can be set as 2 or 3.
Any one of the paging messages in a same location area must be sent
among all the cells in this area at the same time, so the channel volume
for each cell in a location area should be same or approximately the
same.
Change Mode
Offline
Related features
ZGB-02-01-001 paging
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
0
4-73
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3105d
3GPP Name
T3105
3GPP Reference
3GPP TS44.018
This parameter indicates the repeat interval of the RIL3_RR PHYSICAL
INFOMATION message in a asynchronous handover process on
SDCCH.
Start: When an RIL3_RR PHYSICAL INFORMATION message is sent
at the network side.
Stop: When the network receives a layer-2 frame that can be correctly
decoded, or a HANDOVER FAILURE message on the old channel.
At expiry: Send the RIL3_RR PHYSICAL INFORMATION message
Description
again.
Managed Object
Cell
1..67
Step: 1
Unit
10 ms
Default Value
10
Default Value
Configuration Reason
4-74
SJ-20100524164252-017|2011-07-28 (R1.4)
Physical information is sent over FACCH, which occurs every four TDMA
frames. That is, the physical information is sent every 18 ms. Therefore,
20 ms is recommended as an appropriate minimum value.
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T3105f
3GPP Name
T3105
3GPP Reference
3GPP TS44.018
4-75
SJ-20100524164252-017|2011-07-28 (R1.4)
again.
Managed Object
Cell
1..255
Step: 1
Unit
10 ms
Default Value
10
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-76
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
NY1
3GPP Name
Ny1
3GPP Reference
3GPP TS44.018
As specified by GSM standard, the BTS needs to inform the MS
about the time advance to be used through an RIL3_RR PHYSICAL
INFORMATION message. After the BTS sends the RIL3_RR PHYSICAL
INFORMATION message, timer T3105 is started. If layer-2 frames or
TCH frames fails cannot be correctly decoded before the expiry of the
timer, the BTS sends the RIL3_RR PHYSICAL INFORMATION message
again and restarted timer T3105.
This parameter (NY1) indicates the maximum number of repetitions that
Description
Managed Object
Cell
5..50
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
A too large parameter value may cause the waste of radio resources.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-77
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BsAgBlkRes
3GPP Name
BS_AG_BLKS_RES
3GPP Reference
3GPP TS45.002
This is the number of blocks used for AGCH in the 51 multiframes
(BS-AG-BLK-RES).
Because CCCH channel has both Access Grant Channel (AGCH) and
Paging Channel (PCH), a number should be set to indicate how many
CCCH information blocks are reserved for AGCH.To let MSs know
this configuration, there is a configuration parameter in the system
messages in each cell.
This parameter can be dynamically adjusted according to the load status
of different types of common channels. It is broadcast to all MSs in the
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
It is recommended that the values of this parameter for all the cells in
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-78
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
N200forSDCCH
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in
the LapDm protocol of BTS. This parameter determines a multiple of the
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
4-79
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
N200forFACCHF
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in
the LapDm protocol of BTS. This parameter determines a multiple of the
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
0
4-80
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config set
ID->BSC Function ID->Site config->Site ID->Cell-> Basic Params3
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
N200forFACCHH
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in
the LapDm protocol of BTS. This parameter determines a multiple of the
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-81
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
N200forSACCH
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in
the LapDm protocol of BTS. This parameter determines a multiple of the
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-82
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
N200forEstablish
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in the
LapDm protocol of BTS. This parameter determines a multiple N200 used
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
4-83
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
New
Abbreviation
N200forRelease
3GPP Name
N200
3GPP Reference
3GPP TS44.006
N200 refers to the retransmission times on various control channels in the
LapDm protocol of BTS. This parameter determines a multiple N200 used
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4-84
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ECSC
3GPP Name
3GPP Reference
3GPP TS44.018
According to the GSM specifications, when MS is provided with the
ECSC function that is also supported by the network, the MS will transmit
the appended class mark information (Classmark 3) to the network after
immediate assignment through the "CLASSMARK CHANGE" message
as soon as possible.
ECSC (Early Classmark Sending Control) determines whether the
network supports the sending of early category classmarks. This
parameter information is broadcast to MSs in the cell through RIL3_RR
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
to be enabled.
If there is another frequency band in the adjacent cell for handover or
the cell is an extended GSM cell and the network supports the ECSC
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-85
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ImsIadAllowed
3GPP Name
ATT
3GPP Reference
3GPP TS44.018
This parameter indicates whether the IMSI (IMSI Attach/Detach Allowed,
ATT) attach/detach. IMSI detach occur when MS reports switch-off or
when the SIM card is taken out from the MS.
The network (normally VLR) marks "Detach" flag in subscriber
information table. Such procedure assists the network to prevent
unnecessary paging broadcast message to MS. Accordingly, the IMSI
Attach process means that the MS reports entering the working status
to the network or the MS checks after the SIM card is re-inserted into
the MS whether the LAI where the MS is located is consistent with
the original one saved. If yes, the IMSI Attach process will be started;
otherwise, the location updating process will be started instead.
The network (normally VLR) marks "Attach" flag in subscriber information
table after the notification about IMSI attach or location area update
has been received.
This parameter is included in "Control channel information" and is used
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
switching-off.
Adjustment Suggestion
Change Mode
Offline
4-86
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
CellBarAccess
3GPP Name
CELL_BAR_ACCESS
3GPP Reference
3GPP TS 23.022
PLMN carriers can determine whether to allow MS to access a specific
cell (for example the cell in test or the cell for absorbing traffic only).
This parameter informs the MSs in a cell through RIL3_RR SYSTEM
INFORMATION TYPE1, 2, 2bis, 3 and 4..
CellBarAccess and CellBarQulify (cell forbidden limit) can be used
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
special needs.
4-87
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
CallReestablish
3GPP Name
RE
3GPP Reference
3GPP TS 44.018
This parameter indicates whether to allow call reestablishment. When
a call drop occurs due to radio link failure caused by burst interference
or blind spot of high building, the MS can initiate a call reestablishment
process to resume the call. The network can determine whether the call
reestablishment is allowed by setting this parameter.
This parameter is broadcasted to all MSs in the cell through RIL3_RR
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
4-88
SJ-20100524164252-017|2011-07-28 (R1.4)
but may increase the call drop rate. In addition, subscribers prefer
hook-on instead of waiting for the resume of the call because the call
reestablishment needs a long time. Generally, it is recommended to
disable this function.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DtxDwlink
3GPP Name
DTX
3GPP TS 44.018
3GPP TS 48.008
3GPP Reference
3GPP TS 48.058
4-89
SJ-20100524164252-017|2011-07-28 (R1.4)
message of MSC.
Managed Object
Cell
Yes: enabled
No: disabled
Unit
None
Default Value
No
Default Value
Configuration Reason
When MSC forbids the downlink DTX, it is not used no matter how this
Adjustment Suggestion
parameter is set;
When MSC allows the downlink DTX, this parameter determines whether
the downlink DTX is used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-90
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
DtxUplinkBcch
3GPP Name
DTX
3GPP Reference
3GPP TS44.018
The Discontinuous Transmission (DTX) mode means that the system
does not transmit signals during the speech intermission of the
subscriber conversation.
This parameter controls how MS uses the DTX mode. System
broadcasts "RIL3_RR SYSTEM INFORMATION TYPE3" message
to all MSs in the cell. In addition, it may be necessary to notify MSs
of older versions (of the first stage) through the RIL3_RR SYSTEM
INFORMATION TYPE6 message on SACCH. For MSs of newer
versions, the RIL3_RR SYSTEM INFORMATION TYPE6 message
contains Uplink discontinuous transmission. This parameter is one of
the network function parameters.
If both the BTS equipment and TRAU support the DTX mode, set the
Description
Managed Object
Cell
0: MS can use DTX;
1: MS should use DTX;
Unit
None
Default Value
Default Value
Configuration Reason
Enabled by default.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-91
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EmergencyCall
3GPP Name
3GPP Reference
44.018
This parameter indicates whether emergency calls are allowed.
Generally, each MS in the GSM network must have a valid Subscriber
Identifier Module (SIM) to use various services in the network. If an MS
has no SIM or the access level of its SIM (one level in the range from
C0 to C9) is disabled by the serving cell (that is, the MS is not allowed
to initiate an access process according to the system information in
the cell), the operator can determine whether to allow the MS to make
Emergency Calls (ECs), such as a call for police.
As one of network function parameters, the EmergencyCall parameter
is broadcasted to all MSs in the cell through RIL3_RR SYSTEM
INFORMATION TYPE1, 2, 2bis, 3, and 4 messages.
No: MSs with an access level in the range from C0 to C9 are not allowed
to make an emergency call. MSs with an access level in the range
from C11 to C15 are not allowed to make an emergency call too if their
access control bit is "T".
Yes: Emergency calls are allowed for all MSs.
The GSM mobile phone specification designates 112 as a universal
emergency phone number. Because the phone numbers for various
emergency services are different in different countries, the 112
emergency call is generally transferred to civil emergency services,
which provides the exact phone numbers for different emergent special
services. It is recommended to set the parameter value to "Yes", that is,
Description
Managed Object
Cell
Unit
None
4-92
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
In some countries and regions, dialing the emergency phone number
Default Value
can only get the information of emergency services but not the actual
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CellBarQualify
3GPP Name
CELL_BAR_QUALIFY
3GPP Reference
44.018
4-93
SJ-20100524164252-017|2011-07-28 (R1.4)
For the area with overlapped cells, the operators expect that the an MS
preferably selects some cells (that is, set the parameter CellBarQualify)
according to the capacity, traffic and functional difference of each cell.
CellBarQualify is used to limit cell priority in special cases. Network
broadcasts the parameter information to all MSs in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. It is
one of the cell selection parameters.
Select "No" for Cell Bar Access and "No" for Cell bar qualify
(OCellBarQulify), that is, the cell priority is defined as "Normal". An
MS is likely to be expected to preferably enters some types of cells.
Set the priority of this cell type to "Normal", while the priorities of other
cells to "Low". In some cases, such as micro cellular application, and
Description
dual-frequency networking, this setting will not affect the cell reselection.
Managed Object
Cell
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]CellBarAccess
The descriptions of CellBarQualify and CellBarAccess are as follows:
CellBarQualify = 0, CellBarAccess = 0: The cell selection priority is
normal; the cell reselection state is normal;
CellBarQualify = 0, CellBarAccess = 1: The cell selection priority is
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-94
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AccConfigSelect
3GPP Name
None
3GPP Reference
None
This parameter is a user access control switch based on the SIM card
priority.
Description
Managed Object
Cell
0: disable user access control;
1: start the first set of ACC data as the control parameter for user access;
2: start the second set of ACC data as the control parameter for user
access;
3: start the third set of ACC data as the control parameter for user
access;
4: start the fourth set of ACC data as the control parameter for user
access;
Unit
None
Default Value
0: Disable
Default Value
In most cases no manual flow control is needed. The switch is turned off
Configuration Reason
by default.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]UseCellAcc
[BSC]AccessControl
4-95
SJ-20100524164252-017|2011-07-28 (R1.4)
When the user access control is enabled manually, the automatic flow
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UseCellAcc
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0: No. The BSC-level AccessControl parameter is valid;
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
If the same strategy is applied in BSC, this parameter can be set "No".
Change Mode
Offline
Related features
None
Related Parameters
[BSC]AccessControl,
[Cell]AccessControl
4-96
SJ-20100524164252-017|2011-07-28 (R1.4)
is valid;
When this parameter is set to 1, the cell level AccessControl parameter
is valid;
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Access Control
Abbreviation
AccessControl
3GPP Name
Access Control
3GPP Reference
44.018
All MSs in GSM system have an access class (15 classes in total).
The MSs that are in the class ranging between 0 and 9 are common
ones. The MSs that are in the class ranging between 11 and 15 are
special MSs (no access class 10). Therefore, the system can disable
the MSs with certain access classes to access the cell (for example
during the installation and commissioning or the congestion control).
This information can reach MS inside the cell in RIL3_RR SYSTEM
INFORMATION TYPE1, 2, 2bis, 3 and 4 messages through Access
control. It is also one of the system control parameters.
The degree of congestion for any CCCH or processor overload during
congestion control can be reduced by temporarily prohibiting one type or
multiple types of subscribers from accessing the system (for subscribers
of access levels 0 .. 9). Generally the system shows the following
overload conditions:
RACH overload appears in CCCH LOAD INDICATION message and
Description
4-97
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..9, 11..15
Unit
None
Default Value
None
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HBTSScanSupport
3GPP Name
None
4-98
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the HBTS proofread support. The system performs frequency scan on the current network and reports the scanned
signal information according to the radio resource information operators
provided, to finish the selection and setting of adjacent cell parameters,
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
8001 supports this function. You can enable this function as needed.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RSSI threshold
Abbreviation
RSSIThrd
4-99
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the RSSI threshold. It should be reasonably set
in order to ensure GSM system capacity and avoid co-frequency interference. The searching of BCCH frequency to be measured and adjacent
Description
Managed Object
Cell
10..120
Step: 1
Unit
None
Default Value
100
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-100
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
GSM1900Support
3GPP Name
None
3GPP Reference
None
Description
ported.
Managed Object
Cell
GSM900/DCS1800/GSM850,
Value Range and Step
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
4-101
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HBTSRange
3GPP Name
None
3GPP Reference
None
HBTSRangeLow and HBTSRangeHigh are configured and added to
BARANG range. You can configure and add multiple ranges.
HBTSRangeLow: the lower ARFCN in each range; HBTSRangeHigh:
the upper ARFCN in each range.
You can perform such operations as adding or deleting after typing the
Description
BARANG range.
Managed Object
Cell
0..124, 128..251, 512..885, 975..1023
Step: 1
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]HBTSScanSiteNum
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
4-102
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AdditionReselPI
3GPP Name
None
3GPP Reference
None
The cell selection and reselection of MS depends on the C1 and C2
parameters, according to the definition in the GSM specifications.
Network carriers decide whether to use C2 as the cell reselection
parameter.Additional reselection parameter indication is to notify MS
whether C2 criterion is adoptable during the cell reselection.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages.
Additional reselection parameter indication is one of the cell selection
parameters.Value Instruction:
Yes: MS takes off cell reselection parameter PI and the parameters
related to computing C2 from the rest bytes (SI7/8 Rest Octets) of
SYSTEM INFORMATION TYPE 4.
No: MS shall obtain the PI parameter related to the cell reselection and
parameters related to the C2 calculation from the rest bytes (SI7/8 Rest
Octets) of the SYSTEM INFORMATION TYPE7 or 8 message.
Generally, the system messages 7 and 8 are seldom used. Normally this
parameter is No. It shall be Yes when the system adopts the system
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Generally, the system messages 7 and 8 are seldom used. Normally the
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-103
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CellReselPI
3GPP Name
None
3GPP Reference
None
This parameter notifies the MS whether to use C2 as the cell reselection
parameter and if there is the related parameter for calculating C2.
It indicates whether the related parameter for calculating cell reselection
standard C2 is contained in SYSTEM INFORMATION message and
whether C2 standard is adopted in the cell reselection. The successive
Cell reselection offset, Temporary offset and Penalty time are invalid,
and MS takes C1 as the cell reselection standard when this value is No.
This parameter is broadcasted to all MS in the cell in RIL3_RR
SYSTEM INFORMATION TYPE3 and TYPE4 messages.Cell reselection
parameter indication is one of the cell selection parameters.Value
Instruction:
Yes: MS gets parameters to compute C2 from cell broadcast system
messages and regard C2 as a cell reselection standard. Parameters
Cell bar qualify, Cell reselection offset, Temporary offset and Penalty
time are invalid.
No: MS considers C1 parameter as a cell reselection standard.
Parameters Cell bar qualify, Cell reselection offset, Temporary offset
and Penalty time are invalid.
Enable this parameter, if related cell adopts C2 as the cell reselection
Description
Managed Object
Cell
4-104
SJ-20100524164252-017|2011-07-28 (R1.4)
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[Cell]CellBarQualify
[Cell]ReselOffset
[Cell]TemporaryOffset
[Cell]PenaltyTime
Relationship
Parameters Cell bar qualify, Cell reselection offset, Temporary offset and
Penalty time are valid till cell reselection parameter indication is enabled.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselOffset
3GPP Name
CELL_RESELECT_OFFSET
3GPP Reference
4-105
SJ-20100524164252-017|2011-07-28 (R1.4)
The cell reselection caused by the radio channel quality takes C2 as the
standard. C2 is based on parameter C1 plus some man-made offset
parameters. The human factor is to encourage MS to enter some cells in
priority, or to block MS from entering some cells. Usually, such measures
are all adopted to balance traffic in the network.
Besides C1, there are three factors affecting C2: Cell reselection offset,
Temporary offset, and Penalty time.
Cell reselection offset is a magnitude value, which indicates the human
modified value of C2. Calculate a modified value of C2 to encourage or
prevent MS accessing a certain cell, so as to balance the network.
Network broadcasts the parameter information to all MSs in the cell
through RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages. It is one of the cell selection parameters. The validity of this
parameter depends upon Cell reselection parameter indication.
The settings of Cell reselection offset, Temporary offset and the Penalty
time are classified into three cases:
In case of large traffic or poor communication quality inside a cell due
to certain causes, normally MS is expected not to work in that cell (that
is, certain repulsion to that cell).
Penalty time can be set as 31in such cases. Temporary offset is invalid,
and the numerical value of C2 equals C1 minus this parameter Cell
reselection offset. Therefore, the C2 value corresponding to the cell is
decreased, and the possibility that MS reselects the cell is reduced.
Besides, the proper value of this parameter Cell reselection offset can be
set according to the repulsive nature of cell. The more is the repulsive
nature, the larger is the Cell reselection offset. Vice versa in case of
a smaller Cell reselection offset.
For the cell with small traffic and low equipment utilization, normally MS
is encouraged to work in that cell (that is, certain propensity to that cell).
Cell reselection offset must be set between 0 ~ 10 (corresponding to
0 ~ 20 dB) in this case, according to tendency of the cell. The more
is the tendency, the larger is the Cell reselection offset. Vice versa in
case of a smaller Cell reselection offset. It is usually better to set the
Temporary offset same as Cell reselection offset, or a little higher than
Cell reselection offset. The main function of Penalty time is to avoid
frequent cell reselection of MS. The common recommended setting is 1
(20 seconds) or 2 (40 seconds) (the 1800 cell of dual-frequency network
is such a case).
Cell reselection offset is set as 0 and Penalty time as 31 for cells with
ordinary traffic. C2 is equal to C1, that is, without human factors on
Description
the cell.
Managed Object
Cell
4-106
SJ-20100524164252-017|2011-07-28 (R1.4)
0 .. 63
Value Range and Step
Step: 1
Unit
2 dB
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
4-107
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Temporary offset
Abbreviation
TemporaryOffset
3GPP Name
TEMPORARY_OFFSET
3GPP Reference
Description
Managed Object
Cell
0 .. 7
Step: 1
Unit
10 dB
Default Value
Default Value
Configuration Reason
4-108
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Penalty time
Abbreviation
PenaltyTime
3GPP Name
PENALTY_TIME
3GPP Reference
Description
4-109
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0 .. 31
Step: 1
Unit
20 s
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselHysteresis
3GPP Name
CELL_RESELECT_HYSTERESIS
3GPP Reference
4-110
SJ-20100524164252-017|2011-07-28 (R1.4)
When MS reselects a cell, if the original cell and destination cell belong
to different location areas, MS should initialize a location updating
process after cell reselection.
C2 values obtained at the boundary for two adjacent cells are different
due to fading characteristic of radio channel. Consequently, MS selects
cell frequently. The interval between the two cell reselections of MS
is not less than 15 s. However, 15 s is extremely short time in terms
of location updating.
This increases the signaling flow on the network and causes radio
resources to be not fully utilized. In addition, it decreases call completion
rate of the system, as MS cannot respond to paging during location
update.
The GSM specifications set a specific parameter, Cell Reselecting
Hysteresis (CRH), to solve this problem. MS will activate the cell
reselection according to this parameter only when the signal level of
adjacent cell (whose location area is different from that of local cell) is
greater than that of local cell, and meanwhile the value difference must
be greater than that required by the parameter.
Network broadcasts the parameter information to MS in the cell through
RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4 messages. Cell
reselecting hysteresis level is one of the cell selection parameters.
Define Cell reselecting hysteresis level to 4 or 5 (that is, 8 dB or 10 dB
for CRH level) and make certain adjustments in following cases:
Increase cell reselection parameters of adjacent cells with different
LACs. Signaling traffic overload often occurs due to large demand
of services.
Increase cell reselection parameters if adjacent cells belonging to
different location areas with wide coverage range.
If the adjacent cells with different LACs are poor in overlapped coverage,
that is, there is coverage gap, or the adjacent place is an area with
few slow moving objects such as the expressway, the CRH parameter
Description
should be set to 1..3 (that is, 2dB..6dB for the CRH level).
Managed Object
Cell
0 .. 7
Step: 1
Unit
2 dB
Default Value
Default Value
Configuration Reason
4-111
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
NECI
3GPP Name
NECI
3GPP Reference
4-112
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
be set as "Yes".
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-113
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PowerOffsetInd
3GPP Name
None
3GPP Reference
None
For the Class 3 MS of GSM1800, the transmission power for sending an
access request message on the RACH channel is to add an offset value
on the basis of MsTxPwrMaxCCH value. The necessity of the offset
value depends on the parameter PwrOffsetInd.
This parameter information is broadcast to the MS in the cell through the
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
value.
Adjustment Suggestion
value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-114
SJ-20100524164252-017|2011-07-28 (R1.4)
Power offset
Abbreviation
PowerOffset
3GPP Name
POWER OFFSET
3GPP Reference
Description
Managed Object
Cell
0 .. 3
Step: 1
Unit
2 dB
Default Value
Default Value
Configuration Reason
value.
Adjustment Suggestion
value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
4-115
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
DrInd_0
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to support the directed retry. During
an assignment process, if a serving cell has no service channel for
assignment, the system can initiate a directed retry to assign a service
channel in the neighbour cell to the MS according to the measurement
report received from the MS.
Directed retry is a special handover process, which can reduce the MS
access failure rate. Directed retry can be categorized into intra-BSC
directed retry and inter-BSC directed retry. Intra-BSC directed retry does
Description
not need the support of the MSC; while the inter-BSC one does.
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]DrInd_1
[BSC]InDrEnable
When this parameter is set to "Yes", the "DrInd_1" parameter can be set.
Relationship
The directed retry function is enabled only when the BSS-level directed
retry (InDrEnable) and the cell-level directed retry are both enabled.
Related Interfaces
None
4-116
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DrInd_1
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to enable the external directed retry,
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]DrInd_0
[BSC]OutDrEnable
The parameter can only be set when the "DrInd_0" parameter is set
Relationship
to "Yes".
The external directed retry can be enabled only when this parameter and
the OutDrEnable parameter are both enabled.
Related Interfaces
None
4-117
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
QueueInd_0
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow queuing during assignments
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
[BSC]QueueIndAss
[BSC]AssQueEnable
Two BSC-level parameters are related to this parameter: QueueIndAss
Relationship
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
QueueInd_1
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow queuing during handovers
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
[BSC]QueueIndHo
[BSC]HoQueEnable
Two BSC-level parameters are related to this parameter: QueueIndHo
Relationship
4-119
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreemptionInd_0
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether to allow forced release during assignments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message.
If this message contains a high priority level and a valid PCI (indicating
this user can preempt the channel of another user), the BSC can forcibly
release the connection to a user whose PVI is reset (indicating the channel of this user can be preempted by another user) and then allocate the
released channel on this assignment request when no resource is imme-
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]PreemptionIndAss
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreemptionInd_1
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether to allow forced release during handovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can forcibly release the connection to a user whose PVI is
reset (indicating the channel of this user can be preempted by another
user) and then allocate the released resource to this handover request
when no resource is immediately assigned in this handover or the later
Description
handover.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
4-121
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
you should enable the forced release function. If the forced release
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]PreemptionIndHo
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ForcedHoInd_0
3GPP Name
Internal
3GPP Reference
None
4-122
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates whether to allow forced handover during assignments. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command message. If
this message contains a high priority level and a valid PCI (indicating this
user can preempt the channel of another user), the BSC can hand over
a user whose PVI is reset (indicating the channel of this user can be preempted by another user) to another cell and then allocate the released
channel on this assignment request when no resource is immediately asDescription
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]ForcedHolndAss
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-123
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ForcedHoInd_1
3GPP Name
Internal
3GPP Reference
None
This parameter determines whether to allow forced handover during handovers. The MSC sends the priority parameters (including priority level,
PCI, and PVI) to the BSC through an assignment command or handover
request message. If this message contains a high priority level and a
valid PCI (indicating this user can preempt the channel of another user),
the BSC can hand over a user whose PVI is reset (indicating the channel
of this user can be preempted by another user) to another cell and then
allocate the released resource to this handover request when no resource
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
[BSC]ForcedHolndHo
Relationship
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
4-124
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CandidateNum
3GPP Name
None
3GPP Reference
None
This parameter decides maximum number of candidate cells for handover
that can be contained in BSSAP HANDOVER REQUIRED message from
Description
BSC to MSC.
Managed Object
Cell
1 ~ 16
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
4-125
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
FastAvg
3GPP Name
Internal
3GPP Reference
None
During a call, the system may fail to perform the power control due to little
measurement data because the average calculation can only be started
when the amount of measurement data reaches a certain threshold.
For example, if the threshold for average calculation is 8, the system will
not calculate the average when the BSC only receives five measured
values. However, the BSC can calculate the average of the five
measured values by using the fast averaging function. Once some
measured values are already used for power control, they become
useless and cannot be used for power control any longer because using
old measured values may cause control errors. Therefore, the old
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-126
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CanBcchExch
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]CanBCCHEx
Relationship
The cell switchover takes effect only when BSC switch and the cell level
switch should be turned on at a same time.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-127
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CanSdcchDyn
3GPP Name
None
3GPP Reference
None
This parameter decides whether the cell allows SDCCH dynamic config-
Description
uration.
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
enabled. After the cell dynamic SDCCH switchover has been enabled,
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]CanSDCCHDyn
Relationship
The cell switchover takes effect only when BSC switch and the cell level
switch should be turned on at a same time.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-128
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ResourceThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the minimal resource threshold allowed by the
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
20
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-129
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_3
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the base band hopping switch-over is
supported. This function is supported only when the BSC and Cell level
switches are all turned on. When a carrier frequency of the base band
hopping group is in fault, the system will automatically move and keep
Description
Managed Object
Cell
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
The cell that is configured with base band hopping should enable this
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]Info_0_1
Relationship
A cell supports the base band frequency hopping switch-over only when
the switches in BSC level and cell level parameters are set "Yes".
Related Interfaces
None
Impact on Equipment
Impact on service
4-130
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FacchCallInd_0
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow FACCH call establishment
for call reestablishment. If the FACCH call establishment is allowed, the
BSC can assign TCH according to the actual situation no matter whether
SDCCH is available in the cell when an MS attempts to access the net-
Description
work.
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
using TCH as signalling channel will cause the waste of radio resources.
It is only recommended to enable this function in scenarios having
requirements on the preference and completion delay of emergency
calls.
Change Mode
Offline
ZGB-03-01-004 Immediate TCH Assignment
Related features
Related Parameters
None
Relationship
None
4-131
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FacchCallInd_1
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow call establishment on FACCH
for call origination. If FACCH call establishment is allowed, the BSC can
assign TCH according to the actual situation when an MS attempts to
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
4-132
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FacchCallInd_2
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow call establishment on FACCH
for call origination. If FACCH call establishment is allowed, the BSC can
assign TCH according to the actual situation when an MS attempts to
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
4-133
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FacchCallInd_3
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow FACCH call establishment
for call reestablishment. If the FACCH call establishment is allowed, the
BSC can assign TCH according to the actual situation no matter whether
SDCCH is available in the cell when an MS attempts to access the net-
Description
work.
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
4-134
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterfAvgPrd
3GPP Name
INTAVE
3GPP Reference
3GPP TS45.008
The BTS measures the interference on unallocated traffic channels, averages the latest measured interference at a specified period, and converts
the average interference into an interference band. Then it sends the
interference band to the BSC through an RF RESOURCE INDICATION
message. The BSC will take the interference band into consideration be-
Description
Managed Object
Cell
1..31
Step: 1
Unit
480 ms
Default Value
31
Default Value
Configuration Reason
4-135
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_0
3GPP Name
0
3GPP TS45.008
3GPP Reference
3GPP TS48.008
The BTS measures the interference on unallocated traffic channels,
averages the latest measured interference at a specified period, and
converts the average interference into an interference band. Then it
sends the interference band to the BSC through an RF RESOURCE
INDICATION message. The BSC will take the interference band into
consideration before the channel allocation.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. Interference boundary 0 indicates positive
infinity and interference boundary 5 indicates negative infinity. This
parameter specifies the other four boundaries.
Generally, interference boundary 1 to 4 are within the range from -85
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_1
3GPP Name
X1
4-137
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP TS45.008
3GPP Reference
3GPP TS48.008
The BTS measures the interference on unallocated traffic channels,
averages the latest measured interference at a specified period, and
converts the average interference into an interference band. Then it
sends the interference band to the BSC through an RF RESOURCE
INDICATION message. The BSC will take the interference band into
consideration before the channel allocation.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. Interference boundary 0 indicates positive
infinity and interference boundary 5 indicates negative infinity. This
parameter specifies the other four boundaries.
Generally, interference boundary 1 to 4 are within the range from -85
Description
Managed Object
Cell
0..63
0: -110 dBm
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
4-138
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_2
3GPP Name
X2
3GPP TS45.008
3GPP Reference
3GPP TS48.008
The BTS measures the interference on unallocated traffic channels,
averages the latest measured interference at a specified period, and
converts the average interference into an interference band. Then it
sends the interference band to the BSC through an RF RESOURCE
INDICATION message. The BSC will take the interference band into
consideration before the channel allocation.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. Interference boundary 0 indicates positive
infinity and interference boundary 5 indicates negative infinity. This
parameter specifies the other four boundaries.
Generally, interference boundary 1 to 4 are within the range from -85
Description
Managed Object
Cell
0..63
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
4-139
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
15
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_3
3GPP Name
X3
3GPP TS45.008
3GPP Reference
3GPP TS48.008
4-140
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
Default Value
20
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-141
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_4
3GPP Name
X4
3GPP TS45.008
3GPP Reference
3GPP TS48.008
The BTS measures the interference on unallocated traffic channels,
averages the latest measured interference at a specified period, and
converts the average interference into an interference band. Then it
sends the interference band to the BSC through an RF RESOURCE
INDICATION message. The BSC will take the interference band into
consideration before the channel allocation.
The interface boundaries are used to help the conversion of the
interference level (average) value into corresponding interference band
information. Altogether six boundaries determine five interference
bands. In fact, it is unnecessary to set interference boundary 0 and
interference boundary 5. Interference boundary 0 indicates positive
infinity and interference boundary 5 indicates negative infinity. This
parameter specifies the other four boundaries.
Generally, interference boundary 1 to 4 are within the range from -85
Description
Managed Object
Cell
0..63
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
Default Value
25
4-142
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterfBoundary_5
3GPP Name
X5
3GPP TS45.008
3GPP Reference
3GPP TS48.008
4-143
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm
Step: 1
Unit
None
Default Value
63
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-144
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsRadioLKTmOut
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
Description
reestablished or released.
Managed Object
Cell
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64
Unit
SACCH multi-frame
Default Value
64
Default Value
Configuration Reason
be lowered if the parameter is set higher. To improve the call drop rate
index, this parameter can be set higher, But is it not good for the user
perception and system resources utility rate.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
0
4-145
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ConFailCriterion
3GPP Name
3GPP Reference
Description
Managed Object
Cell
1..2
Step: 1
Unit
None
Default Value
4-146
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BsRadioLKTmOut
3GPP Name
RADIO_LINK_TIMEOUT
3GPP Reference
Description
Managed Object
Cell
4, 8, 12, 16, 20, 24, 28, 32, 36, 40, 44, 48, 52, 56, 60, 64
Unit
SACCH multi-frame
Default Value
64
This parameter is the maximum value for radio link counter S at the BSS
Default Value
Configuration Reason
4-147
SJ-20100524164252-017|2011-07-28 (R1.4)
The parameter is correlated with the call drop rate. The call drop rate
Configuration Rule and
will be lowered if the parameter is set higher. To improve the call drop
Adjustment Suggestion
rate index, this parameter can be set higher, But it is not good for the
user perception.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
RxLevThs
3GPP Name
RXLEV
3GPP Reference
Description
4-148
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
This parameter indicates the level threshold to determine the radio link
Adjustment Suggestion
fault.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]ConFailCriterion
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RxQualThs
3GPP Name
RXQUAL
3GPP Reference
Description
Managed Object
Cell
0..7
0: corresponding BER range <0.2%;
1: 0.2% .. 0.4%;
2: 0.4% .. 0.8%;
...
6: 6.4% .. 12.8%;
7: > 12.8%
Unit
None
Default Value
Default Value
Configuration Reason
This parameter indicates the level threshold to determine the radio link
Adjustment Suggestion
fault.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]ConFailCriterion
Relationship
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
4-150
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RxLevQualprd
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..63
Step: 1
Unit
SACCH multi-frame
Default Value
63
Default Value
Configuration Reason
will be lowered if the parameter is set higher. To improve the call drop
Adjustment Suggestion
rate index, this parameter can be set higher, But it is not good for the
user perception.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]ConFailCriterion
Relationship
Related Interfaces
Abis
Impact on Equipment
0
4-151
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Preprocessing indication
Abbreviation
Preprocess
3GPP Name
None
3GPP Reference
None
The survey report contains large amount (message amount) of Abis
interface information. Preprocess of the survey report can be transferred
to BTS to reduce the burden of Abis interface link. After the preprocess,
the BTS averages the survey data of MS by its own, and reports to BSC
in a lower frequency.
The average reporting period can be two, three or four SACCH
multi-frames (480 ms). That is, the frequency decreases from the
original twice/s to once/2 s, so the message amount of the Abis interface
decreases. However, the decrease of message amount still depends on
whether the message length before the preprocess is the same as that
after preprocess. One disadvantage of preprocess is that the handover
control and power control are not in time, which increases the possibility
of disconnection rate. This parameter determines whether to use the
preprocess and its period.
The values are as follows:
0: Do not use preprocess
2: Use preprocess; the average reporting period is 2 SACCH
multi-frames
3: Use preprocess; the average reporting period is 3 SACCH
multi-frames
4: Use preprocess; the average reporting period is 4 SACCH
Description
multi-frames
4-152
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0 .. 4
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
which helps improve handover success rate but affects calldrop rate
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EMLPPThs
3GPP Name
None
3GPP Reference
None
4-153
SJ-20100524164252-017|2011-07-28 (R1.4)
When using high priority user to access service, that is, EMLPP service,
the system may configure certain reserved channels for the users with
high priority to access CS service. The reserved channels equal to the
reserved rate of EMLPP multiplying the minimum value of available chanDescription
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
20
Default Value
Configuration Reason
according to experience.
The higher the parameter value is, the higher the reserved rate is, the
users with high priority are ensured, and comparatively fewer channel
resources are distributed to users with low priority.
The lower the parameter value is, the lower the reserved rate is, and the
less guarantee the users with high priority get.
Change Mode
Offline
Related features
ZGO-01-03-001 Emlpp
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UseCellEmlppThs
4-154
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter defines whether to use eMLPPThs. If yes, you shall select
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
This switch can be enabled when one cell needs to be configured with
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 Emlpp
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_1
3GPP Name
None
3GPP Reference
None
4-155
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates whether the frequency offset correction is supported. This function is applied on the high-speed railway and GSM-R
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_2
3GPP Name
None
3GPP Reference
None
It indicates whether handover commands are issued in the highest trans-
Description
mission power.
Managed Object
Cell
4-156
SJ-20100524164252-017|2011-07-28 (R1.4)
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
in the coverage area with weak signals. It can improve the success rate
of handover commands received by MS.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MrRptTimeBmp
3GPP Name
None
3GPP Reference
None
This parameter provides a check function about 0 .. 23 time points.
Measurement data report can be enabled at different points. Each time
point indicates an hour, within 0 .. 23 hours.
MR data can be reported only when corresponding time points are
Description
Managed Object
Cell
4-157
SJ-20100524164252-017|2011-07-28 (R1.4)
checked, unchecked
Checked: Measurement report function is enabled within this time period;
Value Range and Step
Unit
None
Default Value
Unchecked
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
4-158
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Yes/No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
4-159
SJ-20100524164252-017|2011-07-28 (R1.4)
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_2
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
4-160
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_3
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
Unit
None
4-161
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
The BSC can distinguish the version of the BTS and find whether the
BTS supports the cipher mode A5/3.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_4
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
4-162
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_5
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
Unit
None
4-163
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_6
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
4-164
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_0_7
3GPP Name
None
3GPP Reference
None
This parameter indicates the cipher mode supported by the cell. When the
MSC receives a BSSAP CIPHER MODE COMMAND, BSSAP ASSIGNMENT REQUEST, or BSSAP HANDOVER COMMAND message, which
specifying the required encryption algorithm, the BSC checks whether the
cell supports the encryption algorithm and gives a response according to
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
4-165
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
The BSS and the MSC must support the same encryption algorithm.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CipherMode_1~ CipherMode_7
3GPP Name
None
3GPP Reference
None
This parameter records the priority level of the current cipher mode supported by the cell. The smaller the parameter value is, the higher priority
the corresponding cipher mode has. For example, a cell is configured to
support three cipher modes: "Not support", "A5/1", and "A5/2". The value
of CipherMode_1 is set to 0, the value of CipherMode_2 is set to 1, and
the value of CipherMode_3 is set to 2. Then the priority levels of these
Description
three cipher modes fulfill this relation: "Not support" > "A5/1" > "A5/2".
Managed Object
Cell
4-166
SJ-20100524164252-017|2011-07-28 (R1.4)
0: Not support
1: A5/1
2: A5/2
3: A5/3
4: A5/4
5: A5/5
6: A5/6
Value Range and Step
7: A5/7
Unit
None
Default Value
Default Value
Configuration Reason
Modify the parameter after negotiating with the CN. The cipher
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
Yes
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ChanSelectStrategy
3GPP Name
Internal
3GPP Reference
None
4-167
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter decides the channel allocation mode of each kind of highDescription
priority users.
Managed Object
Cell
Level (1..15). The value range is:
0: According to channel select order of MSC, when prefer TCHF and cell
congest (allocation threshold of HR is exceeded) change to prefer TCHH
1: Prefer TCHF, when cell congest (allocation threshold of HR is
exceeded), change to prefer TCHH
2: Prefer TCHH
3: TCHF only, not allocate TCHH
4: TCHH only, not allocate TCHF
5: According to channel select order of MSC, not consider whether cell
congest
6: According to channel select order of MSC, when prefer TCHF and cell
congest (allocation threshold of HR is exceeded) change to prefer TCHH
7: Prefer TCHF, not consider whether cell congest
8: Prefer TCHF, when cell congest (allocation threshold of HR is
exceeded), change to prefer TCHH if AMR-HR supported
9: Cell congest indicates whether the occupation of cell channels
Unit
None
level 1...15, the default value is: according to channel select order of MSC,
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
4-168
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4.8.17 Info_3
Full Name
Info_3
Abbreviation
Info_3
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4-169
SJ-20100524164252-017|2011-07-28 (R1.4)
4.8.18 Info_4
Full Name
Info_4
Abbreviation
Info_4
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4.8.19 Info_5
Full Name
Info_5
Abbreviation
Info_5
3GPP Name
None
3GPP Reference
None
4-170
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4.8.20 Info_6
Full Name
Info_6
Abbreviation
Info_6
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
0
4-171
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4.8.21 Info_7
Full Name
Info_7
Abbreviation
Info_7
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
4-172
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
SGSN ID
Abbreviation
SGSNID
3GPP Name
None
3GPP Reference
None
This parameter indicates the SGSN ID assigned in the BSC. It is assigned
when users create SGSN. It cannot be modified but can be deleted after
Description
creation.
Managed Object
Cell
1 .. 16
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
planning value.
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
NSEI
Abbreviation
NSEI
3GPP Name
NSEI
3GPP Reference
3GPP TS 48.018
At the BSSGP layer of the GPRS protocol stack, every GPRS cell
is intentionally assigned a BSSGP virtual connection (BVC), that is,
NSEI+BVCI. One BVC must belong to a network service entity (NSE).
NSEI identifies the NSE with a unified code in the entire network.
Generally, one BSC is regarded as one service entity. In the light of
expandability, the ZXG10 system also allows BSC to be attached with
several NSEs.
This parameter can be configured only when users firstly configure the
NSE in "Relevant configuration at GB interface".
Description
Managed Object
Cell
0 .. 65535
Step: 1
Unit
None
Default Value
face.
4-174
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
planning value.
The code of NSE is a unified code in the entire network. The NSE is
consistent with the data at the CN side and is dependent on the actual
cell configuration. Configuration of the value is in accordance with the
ground parameter planning value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BVCI
Abbreviation
BVCI
3GPP Name
BVCI
3GPP Reference
3GPP TS 48.019
BSSGP Virtual Connection (BVC) provides an approach for
communication between different BSSGP entities. The point-to-point
(PTP) or point-to-multipoint (PTM) or inter-signaling entity transmission
of BSSGP PDUs is based on BVC.
Each virtual connection has one identifier, that is, BVCI. It enables the
network service layer at the bottom layer to route BSSGP PDUs to the
peer entity very effectively.Under one NSE, each GPRS cell can be
uniquely identified by the BVCI. One NSE carries only one signaling
Description
BVC (BVCI=0).
4-175
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
2 .. 65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
planning value.
Under one NSE, each GPRS cell can be uniquely identified by the BVCI.
One NSE carries only one signaling BVC (BVCI=0). The value should
not be adjusted and is dependent upon the actual cell configuration. This
parameter must be unique under one SGSN.If the configuration of this
parameter is incorrect, the PS services of the cell may be unavailable.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
RAC
Abbreviation
RAC
3GPP Name
None
3GPP Reference
None
4-176
SJ-20100524164252-017|2011-07-28 (R1.4)
GPRS, similar to the GSM system which uses a location area to manage
a group of cells, performs its management by dividing a location area into
several routing areas identified by RAI (MCC+MNC+LAC+RAC). When
the MS in the attach status performs cell reselection, if the RAIs of the old
and new cells are changed, it initiates a "Routing Area Update" process.
SGSN knows the routing area information of the MS in the standby
status. In this case, when the network has packet data or circuit data
to transmit, it will page the MS in that routing area.One RAI cannot be
configured in several SGSNs.
Description
Managed Object
Cell
0.. 255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-177
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PsBusyLevel
3GPP Name
None
3GPP Reference
None
When UPU performs dynamic adjustment, it calculates the DSP load allocated to the cell according to the PS service level, and preferentially
Description
Managed Object
Cell
1..5
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
For the initial configuration cell, the load is the same by default.
This parameter configuration can be adjusted after the PS service traffic
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-178
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSPushDown
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the cell allows the PS services to be
pushed down. That is, when the bandwidth measured at the Abis interface
exceeds the bandwidth upper limit of the stable area in the Abis resource
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
The default value is disabled in BSC and enabled in the cell by default. It
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
4-179
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AddResPI2
3GPP Name
None
3GPP Reference
None
The cell selection and reselection of MS depends on the C1 and C2
parameters, according to the definition in the GSM specifications.
Network operators decide whether to use C2 as the cell reselection
parameter.
Additional reselection parameter indication is to notify MS whether C2
criterion is adoptable during the cell reselection.
Through the RIL3_RR SYSTEM INFORMATION TYPE3 and TYPE4
messages, this parameter information is broadcast to the MS in the cell.
It is one of the cell selection parameters.
The values are as follows:
No: If the rest bytes (SI4 Rest Octets) of SYSTEM INFORMATION
TYPE4 is available, MS should obtain the cell reselection parameter PI
and the parameters related to the computation of C2 from the rest bytes.
Yes: MS should obtain the PI parameter related to the cell reselection
and parameters related to the computation of C2 from the rest bytes
(SI7/8 Rest Octets) of the SYSTEM INFORMATION TYPE7 or 8
message.
Generally, the system messages TYPE 7 and TYPE 8 are rarely used.
This parameter must be set as No, otherwise some MSs (for example
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Generally, system messages TYPE 7 and TYPE 8 are rarely used. This
parameter must be set as No, otherwise some MSs (for example NEC)
are unable to access the network.
Generally, system messages TYPE 7 and TYPE 8 are rarely used. This
parameter must be set as No, otherwise some MSs (for example NEC)
are unable to access the network.
Change Mode
Offline
Related features
None
4-180
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
Si13Locate
3GPP Name
None
3GPP Reference
None
This parameter is used at the MS side. This parameter information is
broadcast to the MS in SI3, SI4, SI7, SI8, SI13, and PSI3 of the adjacent
cell, indicating the scheduling position of SI13 on BCCH.
The system message 13 is only related to the GPRS service, and it can
be sent on the BCCH Norm position (in this case, the BCCH block with
TC = 4 is occupied; TC = (FN DIV 51) mod (8))), or on the BCCH Ext
position (in this case, a fixed AGCH block with TC = 0 is occupied).
SI13 is seldom sent successfully on the BCCH Ext position because
it has to compete with other messages (for example, immediate
assignment message) for the sending opportunity. In this case,
the parameter value of "Number of blocks reserved for AGCH"
("BsAgBlkRes" in the R_BTS table) must be greater than 0. Otherwise,
Description
Managed Object
Cell
Unit
None
Default Value
BCCH Norm
4-181
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RaColor
3GPP Name
RA COLOUR
3GPP Reference
3GPP TS 44.018
This parameter is used at the MS side. It is broadcast to the MS in SI3,
SI4, SI7 and SI8. The function of RaColor is similar to that of the BCC
in the GSM system. In some cases, such as inter-BSC cell reselection,
the GPRS network assigns different RaColor values to the adjacent cell
with the same route area code to ensure that the MS can initiate the
Routing Area Updating process.
In this way, when receiving different RaColor values in the cells with the
same routing area code, the MS will originate the "Routing Area Update"
Description
Managed Object
Cell
4-182
SJ-20100524164252-017|2011-07-28 (R1.4)
0 .. 7
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Generally, RAC and LA are consistent with each other. The value is
Configuration Reason
set to 0 by default.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CsChansThs
3GPP Name
None
3GPP Reference
None
4-183
SJ-20100524164252-017|2011-07-28 (R1.4)
Idle CS channels (including the idle and dynamic TCH channel, and the
static TCH channel) are reserved in the cell for reducing CS call failure
rate.After the CS channel has been applied for successfully, if the number
of idle CS channels in the current cell is smaller than the threshold, try to
perform such operations as starting intelligent powerup or releasing the
PS channel forcibly, so as to ensure the number of idle CS channels is
Description
Managed Object
Cell
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value is used to reduce CS call failure rate, and ensure
that each time idle channels are available for CS request to access
successfully.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PriAcThr
4-184
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
PRIORITY_ACCESS_THR
3GPP Reference
Description
CLASS.
Managed Object
Cell
Packet access is not allowed, packet access is allowed for priority 1,
packet access is allowed for priority 1-2, packet access is allowed for
priority 1-3, packet access is allowed for priority 1-4 , packet access is
allowed.
Unit
None
Default Value
Default Value
Configuration Reason
If the packet access of users should be limited by the service priority, the
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-185
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSI3quater)
3GPP Name
None
3GPP Reference
None
This parameter is used for the global process on BRP to indicate whether
the various types of PSI messages are sent at a high rate. The number
of packet system messages (16) sent at a high rate is limited, and the
number of sent messages of each type varies from the length of the
message, so the user can only figure out the approximate requirement
for the sending speed of of each type of system message.
Before the message is sent, the global process dynamically specifies
the sending rate for each type of packet system message according
to the users' requirement (accordingly analyze the array subscript of
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
4-186
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OvLoadPer
3GPP Name
None
3GPP Reference
None
This parameter is used at the BTS side. BSC notifies BTS to report the
Description
Managed Object
Cell
0 .. 255
Step: 1
Unit
Default Value
10
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
4-187
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
RLTimeout
3GPP Name
None
3GPP Reference
None
BTS uses this parameter. BSC inform the parameter through O&M message to update the counter when BTS cannot decode RLC Block in GPRS
Description
data.
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
20
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
4-188
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PrachBusyT
3GPP Name
None
3GPP Reference
None
This parameter is used by BTS.PRACH channel overload is one of the
causes for overload control. The busy ratio of random access burst
decides the PRACH overload.
If a bursts level exceeds the level value specified by this parameter, the
Description
Managed Object
Cell
0 .. 63
00: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
63
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
4-189
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MeaAvgSlot
3GPP Name
None
3GPP Reference
None
This parameter is used by BTS. It indicates the number of bursts measured on PRACH. The PRACH channel overloads if the receiving signal
levels of AvgSlots BPs are lower than PrachBusyT. It is one of the parameters used by BTS. If this parameter is modified, the BTS needs to be
Description
synchronized.
Managed Object
Cell
0 .. 100
Step: 1
Unit
None
Default Value
60
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PccchIndTh_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the overload threshold of paging message buffer
for PPCH. The judgment scheme is as follows: i.Calculate the paging
message buffer corresponding to a paging channel. ii.Divide the number of messages stored in the buffer by the maximum storage amount.
iii.Multiply the obtained percentage by 100. Compare the result with the
threshold. If the result exceeds the threshold, the PPCH is considered as
Description
overload.
Managed Object
Cell
0 .. 100
Step: 1
Unit
Default Value
50
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
ZGB-02-01-001 paging
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
4-191
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PccchIndTh_1
3GPP Name
None
3GPP Reference
None
This parameter is used by BTS. It indicates the overload threshold on
PCCCH (PRACH, PPCH). This parameter is an array with 3 elements,
in the unit of %.
PccchIndTh[1]: The paging group overload threshold of PPCH. The
judgment scheme is as follows: i.Accumulate the paging message which
is to be sent in the buffer queue corresponding to each paging group.
ii.Divide the number of messages stored in the buffer by the maximum
storage amount. iii.Multiply the obtained percentage by 100. Compare
the result with the threshold. If the result exceeds the threshold, the
Description
Managed Object
Cell
0 .. 100
Step: 1
Unit
Default Value
50
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
ZGB-02-01-001 paging
Related Parameters
None
4-192
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PccchIndTh_2
3GPP Name
None
3GPP Reference
None
The number of busy blocks on one PRACH divides the total number of
blocks on this PRACH, and then multiplies 100. If the result exceeds this
Description
Managed Object
Cell
0 .. 100
Step: 1
Unit
Default Value
50
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-193
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
DTM support
Abbreviation
DTMSupport
3GPP Name
None
3GPP Reference
None
This parameter information is broadcast to the MS in the GPRS Cell options of SI13, PSI1 and PSI13. It indicates whether the cell supports Dual
Transfer Mode (DTM) which allows the class-A MS to initialize packet re-
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
4-194
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]GttpLapdmNum
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
CCNActive
3GPP Name
CCN_ACTIVE
3GPP Reference
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
network side can specify the special MS whether to enable the parameter
CCN_ACTIVE of the serving cell. The parameter CCN_ACTIVE sent on
PACCH takes priority over that broadcast by the system message. The
MS uses CCN mode only under NC0 and NC1 modes.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNActive
[Cell]SIStatusInd
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
SIStatusInd
3GPP Name
SI_STATUS_IND
4-196
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNSupport
[Cell]CCNActive
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
4-197
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Exc_Acc
3GPP Name
EXC_ACC
3GPP Reference
Description
can be discontinuous.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
4-198
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SpgcSuport
3GPP Name
SPLIT_PG_CYCLE
3GPP Reference
Description
combined)
4-199
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
EpageMode
3GPP Name
extended paging
3GPP Reference
4-200
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PsiStatInd
4-201
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
PSI_STATUS_IND
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNSupport
[Cell]CCNActive
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
4-202
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Ext_UTBF
3GPP Name
NW_EXT_UTBF
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the cell supports the extended uplink
TBF. After BSS receives the uplink block (CV=0), if the cell supports
the extended uplink TBF, it enters into the extended uplink TBF status.
At this time, it continues to assign uplink block resources to the MS.
If new uplink data is required to send during the extended uplink,
re-establishment of uplink TBF is not required.
This function requires the extended uplink function should be supported
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
continues to wait for data transmission after the last data block of the
TBF is successfully transmitted, to avoid the re-setup of the TBF, reduce
the back-and-forth delay, and accelerate the transmission of the uplink
data. ( )
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-203
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UlDelayTime
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter describes the uplink TBF delay time. When the uplink
TBF is released, if the extended uplink TBF function is not supported,
start this timer to access to the uplink delay state and wait for the arrival
Description
of the downlink LLC. The uplink TBF is released if the timer expires.
Managed Object
Cell
0 ..4000
Step: 1
Unit
ms
Default Value
1000
Default Value
The default value is dependent upon the downlink delay time at the
Configuration Reason
Gb interface.
The value is dependent upon the downlink delay time at the Gb interface.
If the delay time is long and the interval between the uplink and downlink
data transmission is long, increase the delay time as needed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
4-204
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DlDelaytime
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates the downlink TBF delay time. When the downlink TBF is released, start this timer to access to the delay state and wait
for new downlink LLC frame. The downlink TBF is released if the timer
Description
expires.
Managed Object
Cell
500.. 4000
Step: 1
Unit
ms
Default Value
2000
Default Value
The default value is dependent upon the delay time between the MS
Configuration Reason
and CN.
The value is dependent upon the delay time between the MS and CN.
If the downlink data is discontinuous and the interval is long, increase
the delay time as needed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
4-205
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ExtUITBFTime
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates the extended uplink TBF delay time. When the
uplink TBF is released, if the extended uplink TBF function is supported,
start this timer to access to the extended uplink TBF state and wait for
Description
new uplink LLC frame. The uplink TBF is released if the timer expires.
Managed Object
Cell
0..3000
Step: 1
Unit
ms
Default Value
1500
Default Value
Configuration Reason
of the MS.
The value is dependent upon the uplink transmission interval of the MS.
If the interval is long, set the value as large; if the interval is short, set
the value as small.
Change Mode
Offline
Related features
Related Parameters
[Cell]Ext_UTBF
Relationship
Related Interfaces
Um
4-206
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GPRSDIRrbpInterVal
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the interval that the downlink Gprs TBF requires
Description
Managed Object
Cell
3..20
Step: 1
Unit
RLC Block
Default Value
10
Default Value
In the radio network where the downlink voice RQ0..5 occupies about
Configuration Reason
the value is, the more the GPRS services are, the slower the downlink
Adjustment Suggestion
Change Mode
Offline
Related features
None
4-207
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
EGPRSDIRrbpInterVal
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the interval that the downlink EGPRS TBF re-
Description
Managed Object
Cell
6..60
Step: 1
Unit
RLC Block
Default Value
10
Default Value
In the radio network where the downlink voice RQ0..5 occupies about
Configuration Reason
4-208
SJ-20100524164252-017|2011-07-28 (R1.4)
The smaller the value is, the fewer the EDGE services are, the faster
the downlink received bitmap information of the MS can be notified to
BSC, and the more the uplink signalling blocks are occupied. The larger
Configuration Rule and
the value is, the more the EDGE services are, the slower the downlink
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
GPRSUlAckInterVal
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the interval that the uplink GPRS TBF network
Description
Managed Object
Cell
3..20
Step: 1
4-209
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
RLC Block
Default Value
10
Default Value
In the radio network where the downlink voice RQ0..5 occupies about
Configuration Reason
and the more the downlink signalling blocks are occupied. The larger the
value is, the more the GPRS services are, the slower the uplink received
bitmap information of the MS can be notified to BSC, and the fewer
the downlink signalling blocks are occupied. If no special requirement,
the value should not be adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EGPRSUlAckInterVal
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the interval that the uplink EGPS TBF network
Description
4-210
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
3..20
Step: 1
Unit
RLC Block
Default Value
Default Value
In the radio network where the downlink voice RQ0..5 occupies about
Configuration Reason
and the more the downlink signalling blocks are occupied. The larger the
value is, the more the EDGE services are, the slower the uplink received
bitmap information of the MS can be notified to BSC, and the fewer
the downlink signalling blocks are occupied. If no special requirement,
the value should not be adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_0_0
3GPP Name
None
3GPP Reference
None
4-211
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
6..12
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
The value is dependent upon the delay between the MS and BSC. If
the delay time is long, set the value as large. Otherwise, set the value
as small.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_0_1
3GPP Name
None
3GPP Reference
None
4-212
SJ-20100524164252-017|2011-07-28 (R1.4)
The network side can send the maximum number of pollings to the MS
when it does not receive any response from the MS. After the maximum
number is reached, the MS instance is released to confirm the interval of
Description
Managed Object
Cell
3..12
Step: 1
Unit
None
Default Value
Default Value
The default value is dependent upon the valid LLC frame and cell
Configuration Reason
reselection.
The value is dependent upon the valid LLC frame, cell reselection and
radio signal quality. If the radio signal quality is poor and cell reselection
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Ulmeasureperiod
3GPP Name
None
4-213
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter is used by UPPB, describing the uplink measurement report period reported by BTS and handled by BSC. The BTS obtains the
Description
measurement report according to the uplink level and quality of the MS.
Managed Object
Cell
400 ..2000
Step: 1
Unit
ms
Default Value
800
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
LoadPer
3GPP Name
None
3GPP Reference
None
4-214
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..16
Step: 1
Unit
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Psi1RepPer
3GPP Name
PSI1_REPEAT_PERIOD
3GPP Reference
4-215
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is used at the MS side and FUC side. This parameter
information is broadcast to the MS through PST1, PST3 and ST13 messages of local and adjacent cells, indicating the sending period and destination of the PST1 message in a cell. The PSI1 message contains the information of cell reselection, PRACH control, control channel description,
and possible global power control parameters. As long as the PBCCH
Description
Managed Object
Cell
0..15
00: The PSI1 repeat period is equal to 1 multiframe;
1: The PSI1 repeat period is equal to 2 multiframes;
......
Unit
Default Value
Default Value
Configuration Reason
frequently.
Adjustment Suggestion
frequently.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-216
SJ-20100524164252-017|2011-07-28 (R1.4)
USF granularity
Abbreviation
USFGranularity
3GPP Name
USF_GRANULARITY
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter information is assigned to the MS in the PACKET UPLINK ASSIGNMENT message, indicating that the network allocates uplink block granularity for the GPRS MS when the cell uses the medium
Description
Managed Object
Cell
0..1
00: allocation granularity for the uplink block is 1;
Unit
None
Default Value
Default Value
The default value is dependent upon the block utilization and GPRS
Configuration Reason
traffic model.
The value is dependent upon the block utilization, uplink and downlink
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-217
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ExUpDynSupport
3GPP Name
EXTENDED_DYNAMIC_ALLOCATION
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the cell supports the extended uplink
dynamic allocation. With this function, the MS only needs to monitor the
USF allocation with the smallest-number timeslot, to decide whether to
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The default value is dependent upon the user traffic model and resources
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]ExUpDynSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
4-218
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Info_1_0
3GPP Name
None
3GPP Reference
None
The PS services in the cell are allocated with a minimum number of Abis
timeslots to ensure that the PS services can obtain a single block and can
be accessed, and some of the ABIS resources in the cell can be used as
PS. Generally, it is recommended not to modify this parameter value. This
Description
Managed Object
BSC
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value is to ensure the basic access of PS services in the cell,
and to prevent the cell from the failure of implementing any PS service
due to the ABIS resouces are occupied by other cells.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
4-219
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_8
3GPP Name
None
3GPP Reference
None
This parameter indicates the maximum number of Abis resources bound
for PS channels newly allocated for the GPRS user when the Abis
resources in the cell are adequate.
This parameter value is valid if the carrier supports EDGE and the
service type applied for is GPRS.
If the carrier supports EDGE and the service type applied for is EDGE,
allocate Abis in accordance with the bandwidth of a maximum four 16K
ABIS timeslots.
If the EDGE is not supported and the carrier is old, allocate Abis in
accordance with the maximum number of 16K ABIS timeslots supported
by the carrier.
This parameter is also valid when the access mode is IP. The following
is the correspondence relationship:
One 16K ABIS timeslot the maximum bandwidth with the FDR_CS2
coding scheme supported.
Two 16K ABIS timeslots the maximum bandwidth with the FDR_CS4
coding scheme supported.
Four 16K ABIS timeslots the maximum bandwidth with the FDR_MCS9
Description
Managed Object
BSC
1..3
1.One 16K ABIS timeslot is bound at most.
2. Two 16K ABIS timeslots are bound at most.
3. Four 16K ABIS timeslots are bound at most.
Step: 1
Unit
None
Default Value
Default Value
Four 16K ABIS timeslots are bound, to ensure the adequate access
Configuration Reason
bandwidth.
4-220
SJ-20100524164252-017|2011-07-28 (R1.4)
If the cell does not support EDGE, this value can be set as two 16K ABIS
timeslots bound at most.
Configuration Rule and
Adjustment Suggestion
The GPRS and EDGE users can be separated completely in the cell.If
the cell is configured with the dedicated EDGE only, or channels
preferred, and GPRS together with EDGE not supported, this value can
be set as two 16K ABIS timeslots bound at most.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_4
3GPP Name
None
3GPP Reference
None
This parameter is to indicate whether the initial channel allocation in downlink is based on multislot capability 1 (i.e. uplink 1 downlink 1) or based
on the MS' actual multislot capability specified in downlink assignment.
It is recommended to allocate in accordance with the multislot capability
1 when the channels or ABIS transmission resources are inadequate, to
Description
Managed Object
Cell
4-221
SJ-20100524164252-017|2011-07-28 (R1.4)
0: No; 1: Yes
Yes: Allocate in accordance with the multislot capability 1
Value Range and Step
Unit
None
Default Value
Yes
Default Value
Configuration Reason
If radio resources and ABIS resources are adequate, this value can be
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UTRANCCOSupp
3GPP Name
None
3GPP Reference
None
4-222
SJ-20100524164252-017|2011-07-28 (R1.4)
to 3G by default
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]PSUTRANCCOSupp
Relationship
Related Interfaces
None
Impact on Equipment
4-223
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CCOStrategy
3GPP Name
None
3GPP Reference
None
This parameter indicates the preferential control policy of 2/3G for PS
Description
Managed Object
Cell
0: Handover to 3G prefered
1: Handover to 3G not prefered
2: Handover to 3G not allowed
3: If SGSN has no requirements, reselect or handover to 3G prefered by
default
4: If SGSN has no requirements, reselect or handover to 3G not
prefered by default
5: If SGSN has no requirements, reselect or handover to 3G not allowed
by default
Unit
None
If SGSN has no requirements, reselect or handover to 3G not prefered by
Default Value
default.
Default Value
Configuration Reason
4-224
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_0
3GPP Name
EXT_UTBF_NO_DATA
3GPP Reference
Description
network.
Managed Object
Cell
1: Yes; 0: No
Unit
None
4-225
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Currently, few MSs are supported. You can set the default value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]EXT_UTBF
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
C/I
Abbreviation
Sc
3GPP Name
None
3GPP Reference
None
4-226
SJ-20100524164252-017|2011-07-28 (R1.4)
6 27..31 3*Sc
Managed Object
Cell
0 .. 8
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value, together with Sa, St, acts on the QoS weight
algorithm. The scheduling algorithm brings a minimal impact on the
weight when the default value is 2.
The resource allocation of the user with great interference should not
be limited any more. Otherwise, the user's speed is too low because of
Adjustment Suggestion
The BSC does not use the MEAN_BEP to allocate different PDTCH
resources for different non-GBR users, which helps increase users'
throughput under the severe radio environment.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-227
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
ARP
Abbreviation
Sa
3GPP Name
None
3GPP Reference
None
The allocation weight for the shared radio block is slightly adjusted
according to the ARP parameter (priority level).
The allocation weight that corresponds to ARP is as follows:
ARP Allocation Weight
1 2*Sa
2 Sa
Description
30
Managed Object
Cell
0 .. 8
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value, together with Sa, St, acts on the QoS weight
algorithm. The scheduling algorithm brings a minimal impact on the
weight when the default value is 3.
This parameter influences the adjustment of the QoS weight allocated by
the radio block. The larger the value is, the more obvious the adjustment
is.For the users with high priority, a certain weight needs to be set for
them, to ensure that more resources are and a better service is available
for them.
Change Mode
Offline
Related features
Related Parameters
None
4-228
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
THP
Abbreviation
St
3GPP Name
None
3GPP Reference
None
This parameter is an amplification factor that is specially designed for
THP at the BSC side to increase the weight of THP in QoS.
Corresponding to different THP values, the weights that the parameter
THP(St) maps are as follows:
THP Allocation weight
00
1 6+3*THP(St)
2 4+2*THP(St)
Description
3 2+THP(St)
Managed Object
Cell
0 .. 8
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value, together with Sa, St, acts on the QoS weight
algorithm. The scheduling algorithm brings a minimal impact on the
weight when the default value is 4.
4-229
SJ-20100524164252-017|2011-07-28 (R1.4)
the radio block. The larger the value is, the more obvious the adjustment
Adjustment Suggestion
is. This parameter is influenced by the QoS parameter set at the core
network side, so it is recommended to use the default value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
PS queuing support
Abbreviation
PsQueueInd
3GPP Name
None
3GPP Reference
None
If PFC is suppoted, iBSC allocates radio resources according to users'
subscribed QoS parameter. When the users' subsribed QoS parameter
is unsatisfied (including through preemption), and the QoS parameter
allows queuing, if this parameter is enabled, the iBSC allocates radio
resources to the user according to Best Effort, and make the user
jump into the queue, to wait for the allocation of radio resources. The
queuing time can be obtained through the PFC process; otherwise if this
parameter is disabled, accessing to this service is directly refused.
When this parameter is Yes, you can configure the PsMaxQueueInstNum
Description
parameter.
Managed Object
Cell
4-230
SJ-20100524164252-017|2011-07-28 (R1.4)
1: Yes, No
Value Range and Step
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
user according to Best Effort, and make the user jump into the queue,
Adjustment Suggestion
Change Mode
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
Related Parameters
[BSC]PFCSupport
[Cell]PsMaxQueueInstNum
Relationship
This parameter is valid until the FFC function is supported by the system.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
PsMaxQueueInstNum
3GPP Name
None
3GPP Reference
None
4-231
SJ-20100524164252-017|2011-07-28 (R1.4)
after the service that needs to join the queue will be refused to access.
Managed Object
Cell
1 .. 16
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
rate cannot be ensured with too many users in a queue because the
Adjustment Suggestion
Change Mode
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
Related Parameters
[Cell]PsQueueInd
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS preemption support
Abbreviation
PsPreemptionInd
4-232
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
When PFC is supported, iBSC allocates radio resources according to
user's subscribed QoS parameter. When the user's subscribed QoS parameter can't be satisfied and the user's QoS parameter allows preemption, if this switch is enabled, the user can preempt the radio resource with
Description
low priority.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
with low priority services. This function is valid until the PFC function is
Adjustment Suggestion
Change Mode
Offline
ZGO-01-02-004 Streaming Service Policies
ZGO-01-02-003 Service based QoS
Related features
Related Parameters
[BSC]PFCSupport
Relationship
This parameter is valid until the FFC function is supported by the system.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-233
SJ-20100524164252-017|2011-07-28 (R1.4)
3G NACC support
Abbreviation
Support3GCCN
3GPP Name
3G_CCN_ACTIVE
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS preempt CS support
Abbreviation
PSPrmpCSSupport
3GPP Name
None
3GPP Reference
None
This parameter indicates when dynamic channel with preferred PDCH is
occupied by CS, to determine whether the channel can be preempted
by PS service.
If this parameter is "Yes", the PS service can preempt the dynamic
channel with preferred PDCH when the PS service fails to apply for
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
disabled by default.
If radio resources are limited, this switch can be enabled to ensure the
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Ts]PDCHPrecedence
PSservice can only the channel configured with the PDCHPrecedence
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-235
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
POCSrcThs
3GPP Name
None
3GPP Reference
None
PoC - Push to Talk over Cellular PoC is a Push to talk service that uses
VoIP technology and is based on the mobile network.
PoC service defines a half-duplex VoIP system applicable to mobile
devices, and makes use of the packet switching capability of radio data
network.
This new function influences the conventional PS channel allocation
policy as the following:
1. Once there are POC users on the PS channel, it is not allowed to
allocate new ordinary PS services to the PS channel until all POC users
on the channel are released.
2. It is better to allocate all the POC users on the channel of the existing
POC users till channel congestion occurs.
This parameter indicates the percentage of current available PS
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
50
Default Value
Configuration Reason
suggestion.
Adjustment Suggestion
suggestion.
Change Mode
Offline
4-236
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_1
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
4-237
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_2
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
4-238
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_3
3GPP Name
None
3GPP Reference
This
Noneparameter defines the P value of uplink interference decision in NC2.
The P value of uplink interference decision in NC2 should be not more than
Description
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-239
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_8
3GPP Name
None
3GPP Reference
None
This parameter defines the N value of uplink interference decision in NC2.
Description
The P value of uplink interference decision in NC2 should be not more than
the N value of uplink interference decision in NC2.
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-240
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_13
3GPP Name
None
3GPP Reference
None
This parameter defines the P value of downlink interference decision in
Description
NC2. The value should be not more than the N value of uplink interference
decision in NC2.
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-241
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_18
3GPP Name
None
3GPP Reference
None
This parameter defines the N value of downlink interference decision in NC2.
Description
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
4-242
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_5_23
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0 ~ 16
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
4-243
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_6_0
3GPP Name
None
3GPP Reference
None
Description
This parameter defines the signal level offset of uplink interference in NC2.
Managed Object
Cell
0 ~ 20
Unit
None
Default Value
10
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-244
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
INFO1_6_5
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0 ~ 16
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_6_10
4-245
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0 ~ 20
Unit
None
Default Value
10
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_6_15
3GPP Name
None
3GPP Reference
None
4-246
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
12
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_6_20
3GPP Name
None
3GPP Reference
None
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1 ~ 31
Unit
None
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_6_25
3GPP Name
None
3GPP Reference
None
Description
Managed Object
This parameter defines the number of samples that calculate the average of
uplink quality level in NC2.
Cell
4-248
SJ-20100524164252-017|2011-07-28 (R1.4)
1 ~ 31
Unit
None
Default Value
12
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
INFO1_7_0
3GPP Name
None
3GPP Reference
None
Description
This parameter defines the number of samples that calculate the average of
downlink quality level in NC2.
Managed Object
Cell
1 ~ 31
Unit
None
4-249
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_16
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the instance can be transformed from
the delay status to the extended uplink status.
The transformation details are: If the MS is judged as supporting
extended uplink status, stop the delay timer and start uplink block
allocation to enter the extended uplink status.
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
4-250
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_8
3GPP Name
None
3GPP Reference
None
4-251
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0 .. 10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-252
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_17
3GPP Name
None
3GPP Reference
None
When events, such as CS preemption, that the PS channel should
be released occur, if the control plane judges that the timeslot to
be released is not important or unique after receiving the dynamic
channel conversion message, then the control plane initiates resource
adjustment and sends the resource assignment message to the user
plane. The user plane then sends packet uplink/downlink assignment
messages or timeslot reallocation messages to the MS.
Description
Managed Object
Cell
Yes/No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
initiate a resource adjustment process, and the TBF will not be released
abnormally because the resources are preempted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
0
4-253
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSALLOCSC_0
3GPP Name
None
3GPP Reference
None
After the subcell is configured, this parameter is used to control the
subcell selection strategy. The strategy includes the first subcell
preferred, the second subcell preferred, and the first subcell only.
This parameter influences the strategy for the control plane to apply
for channels with the database. The control plane, together with this
parameter configuration, decides the strategy.
Configuration instructions:
The first subcell only: The parameter strategy transmitted from the
control plane to the database can only be the first subcell, and this
parameter is configured for the current network only when the first
subcell supports PS service.
The first subcell preferred: If the user can stay at the first subcell or the
second subcell (determined by the level and TA value), the allocation
strategy transmitted to the database is the first subcell preferred.
The second subcell preferred: If the user can stay at the first subcell or
the second subcell (determined by the level and TA value), the allocation
strategy transmitted to the database is the second subcell preferred.
The principle for the database to allocate these three parameters is
as follows:
The first subcell only: The PS service is allocated on the channel of
the first subcell only.
The first subcell preferred: The quota of PFC users cannot be satisfied
or the available channels in the first subcell are inadequate. Otherwise,
the PS service is allocated to the first subcell.
Description
4-254
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..2
0: The first subcell preferred;
: The second subcell preferred;
2: The second subcell only;
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-255
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PSALLOCSC_1
3GPP Name
None
3GPP Reference
None
After the subcell is configured, this parameter is used to control the level
threshold for selecting the first subcell.
If the level of the second subcell is lower PSALLOCSC_1, it is necessary
to reselect the first subcell.
If the channel allocation strategy configured by the background is the
second subcell preferred, apply for reselecting the channels with the first
subcell preferred, with the database.
If the channel allocation strategy configured by the background is the
first subcell preferred, apply for reselecting the channels with the first
Description
Managed Object
Cell
0 .. 63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
20
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]PSALLOCSC_0
Relationship
Related Interfaces
4-256
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PSALLOCSC_2
3GPP Name
None
3GPP Reference
None
After the subcell is configured, this parameter is used to control the level
threshold for selecting the second subcell.
If the level of the first subcell is lower than PSALLOCSC_1, it is
necessary to reselect the subcell.
If the channel allocation strategy configured by the background is the
second subcell preferred, apply for reselecting the channels with the
second subcell preferred, with the database.
If the channel allocation strategy configured by the background is the
first subcell preferred, apply for reselecting the channels with the first
Description
Managed Object
Cell
0 .. 63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm ~ -108 dBm;
......
62: -49 dBm ~ -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
40
4-257
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]PSALLOCSC_0
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_7_13
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the extended cell supports multiple
timeslots allocation. The extended cell can allocate 1..3 channels in
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
No
4-258
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4.12.31 Info1_2
Full Name
Info1_2
Abbreviation
Info1_2
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
4-259
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
4.12.32 Info1_3
Full Name
Info1_3
Abbreviation
Info1_3
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-260
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
T3168
Abbreviation
T3168
3GPP Name
T3168
3GPP Reference
Description
ACK/NACK message.
Managed Object
Cell
4-261
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
Default Value
Configuration Reason
the request for packet access is more likely to occur, and the probability
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-262
SJ-20100524164252-017|2011-07-28 (R1.4)
T3192
Abbreviation
T3192
3GPP Name
T3192
3GPP Reference
Description
Managed Object
Cell
Unit
ms
Default Value
500
Default Value
Configuration Reason
If the value is set as too small, the MS will quickly release TNF resources.
The time of establishing downlink TBF is longer when new downlink
data is available and the network must initiate a paging procedure or an
immediate assignment procedure (if the MS is waiting for assignment).If
the timer T3192 does not expires and new downlink data is available,
4-263
SJ-20100524164252-017|2011-07-28 (R1.4)
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
T3142
Abbreviation
Info1_0_2
3GPP Name
T3142
3GPP Reference
4-264
SJ-20100524164252-017|2011-07-28 (R1.4)
expires.
Managed Object
Cell
0...255
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-265
SJ-20100524164252-017|2011-07-28 (R1.4)
T3172
Abbreviation
Info1_0_3
3GPP Name
T3172
3GPP Reference
Description
The packet access will not be prohibited after the timer expires.
Managed Object
Cell
0...255
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
4-266
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DrxTimeMax
3GPP Name
DRX_TIMER_MAX
3GPP Reference
Description
ATTACH.
Managed Object
Cell
Unit
4-267
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
2
The default value of BS_PA_MFRMS is 5, and the paging period is
1.18 s which is smaller than the default value 2 s, so TBF can be fast
established within 2 s.
In non-DRX mode, TBF is established faster than it established in DRX
mode, because the Immediate Assignment message is sent much
faster (40 ms) on all PCH and AGCH channels than the message
sent in DRX mode.In DRX mode, the MS can only monitor the paging
message on the paging group to which the MS belongs, and then
receives the Immediate Assignment message on all paging blocks and
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-268
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BsCvMax
3GPP Name
BS_CV_MAX
3GPP Reference
Description
Managed Object
Cell
0...15
Unit
None
Default Value
15
Default Value
Configuration Reason
4-269
SJ-20100524164252-017|2011-07-28 (R1.4)
If the network does not enable the extended uplink function or the
MS does not support GERA package 1, the MS does not support the
extended uplink function. When the MS enters the countdown process,
all the new uplink LLC data should be sent in one TBF, and the initial
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CtraCKType
3GPP Name
CONTROL_ACK_TYPE
3GPP Reference
4-270
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AccessType
3GPP Name
ACCESS_BURST_TYPE
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is used at the MS side. It belongs to GPRS Cell Options IE and is broadcast to the MS in the SI13 message on BCCH and
in the PSI13 message on PSI13, indicating whether to use the 8-bit or
11-bit access burst in PRACH, PTCCH/U, and the PACKET CONTROL
Description
ACKNOWLEDGEMENT messages.
Managed Object
Cell
8 bits, 11 bits
Unit
None
Default Value
8 bits
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PanDec
3GPP Name
PAN_DEC
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
N3102 is invalid.
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
high due to radio resources are occupied for a long time when the MS
Adjustment Suggestion
stops sending windows and cannot send data. If the value of PAN_MAX
and PAN_INC is reduced and the value of PAN_DEC is increased, it is
liable to cause TBF abnormal release of the MS and cell reselection,
thereby the normal release ratio of TBF in the cell is reduced and data
transmission rate is influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
4-273
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PanInc
3GPP Name
PAN_INC
3GPP Reference
Description
N3102 is invalid.
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
high due to radio resources are occupied for a long time when the MS
Adjustment Suggestion
stops sending windows and cannot send data. If the value of PAN_MAX
and PAN_INC is reduced and the value of PAN_DEC is increased, it is
liable to cause TBF abnormal release of the MS and cell reselection,
thereby the normal release ratio of TBF in the cell is reduced and data
transmission rate is influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
N3102 max
Abbreviation
PanMax
3GPP Name
PAN_MAX
3GPP Reference
4-275
SJ-20100524164252-017|2011-07-28 (R1.4)
N3102 is invalid.
Managed Object
Cell
Unit
None
Default Value
32
Default Value
Configuration Reason
high due to radio resources are occupied for a long time when the MS
Adjustment Suggestion
stops sending windows and cannot send data. If the value of PAN_MAX
and PAN_INC is reduced and the value of PAN_DEC is increased, it is
liable to cause TBF abnormal release of the MS and cell reselection,
thereby the normal release ratio of TBF in the cell is reduced and data
transmission rate is influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
4-276
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GPRSInitattselt_0~GPRSInitattselt_3
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter represents the default coding scheme corresponding to
the GPRS MS in such modes as the uplink init coding scheme, downlink
init coding scheme, uplink max coding scheme, and downlink max coding
Description
scheme.
Managed Object
Cell
Uplink init coding scheme: CS1, CS2, CS3, CS4;
Downlink init coding scheme: CS1, CS2, CS3, CS4;
Uplink max coding scheme: CS1, CS2, CS3, CS4;
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
4-277
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InitAttachExch_0
3GPP Name
None
TS 44.060: "Radio Link Control/Medium Access Control (RLC/MAC) pro-
3GPP Reference
tocol"
This parameter indicates whether the GPRS MS default code can be
Description
changed dynamically.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
The value is dependent upon the radio signal quality in the network. If
Adjustment Suggestion
the radio signal quality fluctuates greatly, set the value as "Yes".
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
4-278
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NcRepPerI
3GPP Name
NC_REPORTING_PERIOD_I
3GPP Reference
Description
Managed Object
Cell
Unit
Default Value
61.44
Default Value
Configuration Reason
Adjustment Suggestion
value.
Change Mode
Offline
Related features
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]CtrlOrder
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NcRerPerT
3GPP Name
NC_REPORTING_PERIOD_T
3GPP Reference
Description
Managed Object
Cell
Unit
Default Value
3.84
Default Value
Configuration Reason
4-280
SJ-20100524164252-017|2011-07-28 (R1.4)
the lower the value is, the more frequently the measurement reported,
Configuration Rule and
Adjustment Suggestion
but the more the signalling load is.Set the value in accordance with the
actual network load.
Change Mode
Offline
Related features
Related Parameters
[Cell]CtrlOrder
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MeaOrder
3GPP Name
MEASUREMENT_ORDER
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CtrlOrder
3GPP Name
NETWORK_CONTROL_ORDER
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
NC0
4-282
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Setting of the value is in accordance with the network load, network plan
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
NcNoDrxPer
3GPP Name
NC_ NON_DRX_PERIOD
3GPP Reference
Description
Managed Object
Cell
(No non-DRX mode, 0.24, 0.48, 0.72, 0.96, 1.20, 1.44, 1.92)
Unit
4-283
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
.48
Default Value
Setting of the default value (0.48 s) is to save power for MS and reduce
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]CtrlOrder
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ExMeaOrder
3GPP Name
EXT_MEASUREMENT_ORDER
3GPP Reference
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(EM0, EM1)
Unit
None
Default Value
EM0
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ExtRepType
3GPP Name
EXT_REPORTING_TYPE
3GPP Reference
4-285
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Unit
None
Default Value
Type 1
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-286
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ExtRepPer
3GPP Name
EXT_REPORTING_PERIOD
3GPP Reference
Description
Managed Object
Cell
Unit
Default Value
1920
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
4-287
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Wnd
3GPP Name
None
3GPP Reference
None
When the network in NC2 mode controls the cell reselection, this parameter is used.When the number of measurement reports reaches the setting
value of this parameter, average processing is done for the measurement
Description
reports.
Managed Object
Cell
1.. 8
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The smaller the window size is, the greater the random interference
is. If the window size is too large, the real-time-change of radio signal
cannot be reflected.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-288
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
AllowedRepNum
3GPP Name
None
3GPP Reference
None
When the network in NC2 mode controls the cell reselection, this parameter is used.When the adjacent cell receives the average level, and the
number of valid measurement reports received in slip window is lower
Description
Managed Object
Cell
1 .. 6
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
performed by the adjacent cell, the higher the reselection threshold is. In
that case, the network is unable to notify the MS of reselection, which
may lead to TBF failure occurs. The smaller the parameter value is, the
lower the reselection threshold is, which may cause frequent reselection.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T_AVG_W
3GPP Name
T_AVG_W
3GPP Reference
Description
Managed Object
Cell
0..31
0: The filter period is 2(0/2)/6multi-frames;
1: The filter period is 2(1/2)/6multi-frames;
...
25: The filter period is 2(25/2)/6multi-frames;
Unit
Default Value
Default Value
Configuration Reason
in packet idle mode, and calculates the C value. The formula is: Cn =
(1-a) Cn-1 + a Cblock, n, , a = 1/MIN(n, MAX(5, TAVG_W*NDRX))..
For the details, see 45008 10.2.3.1.1. Currently this parameter is not
supported and it is 0 by default.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-290
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T_AVG_T
3GPP Name
T_AVG_T
3GPP Reference
Description
the signal intensity for power control in the packet transmission mode.
Managed Object
Cell
0..31
0: The filter period is 2(0/2)/6multi-frames;
1: The filter period is 2(1/2)/6multi-frames;
...
25: The filter period is 2(25/2)/6multi-frames;
26..31: Reserved
Unit
Default Value
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
Psi4Send
3GPP Name
INT_MEAS_CHANNEL_LIST_AVAIL
3GPP Reference
Description
survey.
Managed Object
Cell
1: Yes
0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
4-292
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcMeasChan
3GPP Name
PC_MEAS_CHAN
3GPP Reference
Description
where the downlink power strength is surveyed for uplink power control.
Managed Object
Cell
BCCH, PDCH
Unit
None
Default Value
BCCH
Default Value
Configuration Reason
Set it with the default value. MS surveys the BCCH uplink power.
4-293
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
Alpha
3GPP Name
ALPHA
3GPP Reference
Description
Managed Object
Cell
0..10
If the parameter for MS transmitting power control is Alpha (),
0: = 0.0;
1: = 0.1;
...
10: = 1.0;
11..15: = 1.0
Unit
None
Default Value
4-294
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
N_AVG_I
3GPP Name
N_AVG_I
3GPP Reference
Description
Managed Object
Cell
0..15
Step: 1
Unit
None
Default Value
4-295
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Pb
3GPP Name
None
3GPP Reference
None
Power descending on PBCCH
Description
Unsupported
Managed Object
Cell
Unit
2 dB
Default Value
Default Value
Configuration Reason
None
4-296
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselOff_0
3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
Description
Managed Object
Cell
4-297
SJ-20100524164252-017|2011-07-28 (R1.4)
0..31
0: -52 dB;
1: -48 dB;
...
22: +12 dB;
...
31: +48 dB
-52 dB .. -12 dB. The step between 12 dB .. 48 dB is 4 dB. The step
Value Range and Step
Unit
2 dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
ReselOff_1
3GPP Name
GPRS_RESELECT_OFFSET
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
transmission state.
Managed Object
Cell
0..31
0: -52 dB;
1: -48 dB;
...
22: +12 dB;
...
31: +48 dB
Unit
2 dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-299
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TempOffset_0
3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
Description
Managed Object
Cell
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-300
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TempOffset_1
3GPP Name
GPRS_TEMPORARY_OFFSET
3GPP Reference
Description
transmission state.
Managed Object
Cell
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-301
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PenalTime_0
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
Description
Managed Object
Cell
0..31
0: 10 s;
1: 20 s;
...
31: 320 s
Unit
10 s
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-302
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PenalTime_1
3GPP Name
GPRS_PENALTY_TIME
3GPP Reference
Description
transmission state.
Managed Object
Cell
0..31
0: 10 s;
1: 20 s;
...
31: 320 s
Unit
10 s
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
0
4-303
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T_Resel_0
3GPP Name
T_RESEL
3GPP Reference
Description
Managed Object
Cell
Unit
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-304
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
T_Resel_1
3GPP Name
T_RESEL
3GPP Reference
Description
transmission state.
Managed Object
Cell
Unit
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
4-305
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HCS_Thr_0
3GPP Name
HCS_THR
3GPP Reference
Description
Managed Object
Cell
0..63
0: -110 dBm;
1: -108 dBm;
...
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
4-306
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HCS_Thr_1
3GPP Name
HCS_THR
3GPP Reference
Description
transmission state.
Managed Object
Cell
0..63
0: -110 dBm;
1: -108 dBm;
...
Step: 1
Unit
None
Default Value
4-307
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
HCS Priority
Abbreviation
PrioClass_0
3GPP Name
PRIORITY_CLASS
3GPP Reference
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
4-308
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HCS Priority 2
Abbreviation
PrioClass_1
3GPP Name
PRIORITY_CLASS
3GPP Reference
Description
transmission state.
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
0
4-309
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
The priority of an HCS cell gets higher with the increase of the parameter
Adjustment Suggestion
value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
C31 hysteresis
Abbreviation
C31_Hyst_0
3GPP Name
C31_HYST
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
4-310
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
C31 hysteresis 2
Abbreviation
C31_Hyst_1
3GPP Name
C31_HYST
3GPP Reference
Description
transmission state.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
4-311
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
This is a NC2 reset parameter. Set the parameter "Yes" to function the
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselHys_0
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
Description
traffic on the network, thus the radio resources cannot be fully utilized.
4-312
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0, 2, 4, 6, 8, 10, 12, 14
Unit
dB
Default Value
Default Value
Configuration Reason
used.
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
4-313
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReselHys_1
3GPP Name
GPRS_CELL_RESELECT_HYSTERESIS
3GPP Reference
Description
transmission state.
4-314
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0, 2, 4, 6, 8, 10, 12, 14
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
When two adjacent cells with different LACs have poor coverage at the
border, that is, when there is a coverage gap, or the border area is at a
place with few slow moving objects, such as the expressway, the CRH
parameter shall be set with the value between 1 .. 3 (that is, the CRH
level should fall into the value range of 2 dB .. 6 dB).
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RaReselHys_0
3GPP Name
RA_RESELECT_HYSTERESIS
4-315
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
0, 2, 4, 6, 8, 10, 12, 14
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
4-316
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RaReselHys_1
3GPP Name
RA_RESELECT_HYSTERESIS
3GPP Reference
Description
transmission state.
Managed Object
Cell
0, 2, 4, 6, 8, 10 12, 14
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-317
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RadAcRetry_0
3GPP Name
None
3GPP Reference
None
This parameter is used at MS side. The parameter information is
broadcast to MS through system message from BTS, indicating whether
an MS is allowed to access another cell (if it exists).
When an abnormal release occurs during the packet transmission, the
MS discards all the running TBFs. If the MS is allowed to access other
cells, it should perform abnormal cell re-selection, and establish TBF
after entering new cell. If other suitable cells exist, an MS cannot select
the original cell within T_RESEL seconds.
This parameter is used during re-selection in idle status. It only functions
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
used.
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
4-318
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
RadAcRetry_1
3GPP Name
None
3GPP Reference
None
This parameter is used at MS side. The parameter information is passed
to MS through PACCH, indicating whether an MS is allowed to access
another cell (if it exists).
When an abnormal release occurs during the packet transmission, the
MS discards all the running TBFs. If the MS is allowed to access other
cells, it should perform abnormal cell re-selection, and establish TBF
after entering new cell. If other suitable cells exist, an MS cannot select
the original cell within T_RESEL seconds.
This parameter indicates the parameter used during re-selection in
Description
transmission state.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-319
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
C32_Qual_0
3GPP Name
C32_QUAL
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-320
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
C32_Qual_1
3GPP Name
C32_QUAL
3GPP Reference
Description
transmission state.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
This parameter impacts the C31 and C32 re-selection rule, and is not
Configuration Reason
recommended to be used.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-321
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RxLevAsMin_0
3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
Description
Managed Object
Cell
0..63
0: -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
12
4-322
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RxLevAsMin_1
3GPP Name
GPRS_RXLEV_ACCESS_MIN
3GPP Reference
Description
the network, that is, the minimum level for an MS to access a cell.
4-323
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
12
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-324
SJ-20100524164252-017|2011-07-28 (R1.4)
Priority threshold
Abbreviation
Prio_Thr
3GPP Name
PRIO_THR
3GPP Reference
Description
Managed Object
Cell
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
HCS exist
4-325
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HCS_Exist_0
3GPP Name
None
3GPP Reference
None
This parameter is used at MS side. This is a Hierarchical Cell Structure
(HCS) parameter and the parameter information is broadcast to MS
through system message from BTS. This parameter indicates whether
the HCS parameters (PriorityClass and HCSThr) exist in the cell. If this
cell does not use HCS parameters, an MS will ignore HCS parameters
of other cells, then all cells use infinite threshold of HCS signal level.
This parameter is used during re-selection in idle status. It is enabled
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-326
SJ-20100524164252-017|2011-07-28 (R1.4)
HCS exist 2
Abbreviation
HCS_Exist_1
3GPP Name
None
3GPP Reference
None
This parameter is used at MS side. This is a Hierarchical Cell Structure
(HCS) parameter and the parameter information is passed to MS
through PACCH. This parameter indicates whether the HCS parameters
(PriorityClass and HCSThr) exist in the cell. If this cell does not use HCS
parameters, an MS will ignore HCS parameters of other cells, then all
cells use infinite threshold of HCS signal level.
This parameter indicates the parameter used during re-selection in
Description
transmission state.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
used.
When the radio network have different cell re-selection priority, set
this parameter "Yes" if the C31 judgment criteria for the priority cell
re-selection and signal level threshold is applied. When more than one
cell has the highest priority, C32 judgment criteria should be used for the
cells with a same priority.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
4-327
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
MsTxMaxCch_0
3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
Description
Managed Object
Cell
0..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
used.
4-328
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsTxMaxCch_1
3GPP Name
GPRS_MS_TXPWR_MAX_CCH
3GPP Reference
Description
certain success rate of MS access at the cell edge while decreasing the
4-329
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
certain success rate of MS access at the cell edge while decreasing the
access level of MS as much as possible. Obviously, the coverage area
increases with the uplift of MS output power. It is recommended to set
this parameter 5 (for GSM900MS) and 2 (for GSM1800MS).
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
4-330
SJ-20100524164252-017|2011-07-28 (R1.4)
LSA ID
Abbreviation
LSA_Id
3GPP Name
LSA ID
3GPP Reference
Description
Managed Object
Cell
0.. 16777215
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
This parameter is related to PBCCH, and the default value is not used.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-331
SJ-20100524164252-017|2011-07-28 (R1.4)
LSA Offset
Abbreviation
LSA_Offset
3GPP Name
LSA_OFFSET
3GPP Reference
Description
45.008.
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-332
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PagBlkRes
3GPP Name
BS_PAG_BLKS_RES
3GPP Reference
Description
Managed Object
Cell
0..10
Step: 1
Unit
None
Default Value
Default Value
The default value is dependent upon the value stipulated in the protocol,
Configuration Reason
This value is dependent upon the value stipulated in the protocol, and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
4-333
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PbcchBlks
3GPP Name
BS_PBCCH_BLKS
3GPP Reference
Description
Managed Object
Cell
PBCCH occupies 1 block in the multiframe
PBCCH occupies 2 blocks in the multiframe
PBCCH occupies 3 blocks in the multiframe
Unit
None
Default Value
Default Value
The default value is dependent upon the value stipulated in the protocol,
Configuration Reason
This value value is dependent upon the value stipulated in the protocol,
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
4-334
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PrachBlks
3GPP Name
BS_PRACH_BLKS
3GPP Reference
Description
Managed Object
Cell
0..15
Step: 1
Unit
None
Default Value
Default Value
The defalut value is dependent upon the value stipulated in the protocol,
Configuration Reason
This value is dependent upon the value stipulated in the protocol, and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
4-335
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TxInt
3GPP Name
TX_INT
3GPP Reference
Description
(S).
Managed Object
Cell
Unit
None
Default Value
32
4-336
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
3GPP Reference
Description
4-337
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
12, 15, 20, 30, 41, 55, 76, 109, 163, 217
Unit
Default Value
109
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxRetrans
3GPP Name
MAX_RETRANS
3GPP Reference
4-338
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1, 2, 4, 7
Unit
None
Default Value
[4, 4, 4, 4]
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AccCtrlClass
3GPP Name
ACC_CONTR_CLASS
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
C10 is always 0.
Managed Object
Cell
Yes/No
Unit
None
Default Value
[No, No, No, No, No, No, No, No, No, No, No, No, No, No, No, No]
Default Value
Configuration Reason
Adjustment Suggestion
the value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-340
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PersistLev
3GPP Name
PERSISTENCE_LEVEL
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
[0, 0, 0, 0]
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-341
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HybridOccuSupp
3GPP Name
None
3GPP Reference
None
The attribute PreferPsService of the static PD channels and dynamic
channels falls into such two types as GPRS and EGPRS.
This parameter indicates whether to support GPRS users occupying
EGPRS preference channel and whether EDGE users can occupy
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
to prevent the GPRS users from interfering the rate of EDGE users. If
the radio resources are limited, to a certain extent, the rate is allowed
to be decreased, and set the value as "Yes" to allow the EGPRS users,
together with the EDGE users, occupy the preference channel.
Change Mode
Offline
Related features
Related Parameters
[Ts]PreferPsService
Relationship
Related Interfaces
4-342
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AllowPsMove
3GPP Name
None
3GPP Reference
None
This parameter describes whether to support subscriber moving out of
other preference channel.
If the EDGE users on other channels are released, the EDGE users on
the GPRS preference channel wll be attempted to be migrated.
If the EDGE users on other channels are released, the EDGE users on
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
4-343
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AllowCsMove
3GPP Name
None
3GPP Reference
None
This parameter describes whether to support CS service (on the dynamic
channel) moving in the cell when the CS channel is released and the
resources are relatively idle, so as to enhance the continuity of PS timeslot
combination to the maximum extent. The resources are idle, which is
based on: all idle CS service channels (including the static and dynamic
TCHs)/total number of available service channels = alarm threshold of
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
4-344
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SfPreferBusyThs
3GPP Name
None
3GPP Reference
None
During this PS application, the allocation result is optimal if the existing
QoS quota / total available QoS quota on the preferential channel (GPRS
or EDGE) at this side is lower than this percentage. The allocation
result, together with the congeneric occupied threshold, is used to the
target evaluation function.
If the AllowPsMove switch is enabled, the GPRS users on the GPRS
preference channel are attempted to be migrated after they are released.
If the number of GPRS users on the EDGE preference channel
exceeds the non-congeneric occupied threshold (OpPreferBusyThs), PS
migration is initiated when the congeneric threshold (SfPreferBusyThs)
on the GPRS channel is lower than the threshold after the migration of
GPRS users. The same as EDGE.
If the EDGE users on other channels are released, the EDGE users on
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
100
4-345
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
It is recommended not to adjust the default value but set it as 100 (that
Configuration Reason
GPRS EDGE .You can adjust the value if the GPRS and EDGE
Offline
Related features
Related Parameters
[Cell]AllowPsMove
[Cell]OpPreferBusyThs
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-346
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
OpPreferBusyThs
3GPP Name
None
3GPP Reference
None
During this application, the allocation result is optimal if the existing
QoS quota / total available QoS quota on the preferential channel at
the oppsite side is lower than this percentage. The allocation result,
together with the congeneric occupied threshold, is used to the target
evaluation function.
If the AllowPsMove switch is enabled, the GPRS users on the GPRS
preference channel are attempted to be migrated after they are released.
If the number of GPRS users on the EDGE preference channel
exceeds the non-congeneric occupied threshold (OpPreferBusyThs), PS
migration is initiated when the congeneric threshold (SfPreferBusyThs)
on the GPRS channel is lower than the threshold after the migration of
GPRS users. The same as EDGE.
If the EDGE users on other channels are released, the EDGE users on
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
Default Value
It is recommended not to adjust the default value but set it as 0 (that is,
Configuration Reason
It is recommended not to adjust the value but set it as 0 (that is, this
Adjustment Suggestion
parameter is invalid).
Change Mode
Offline
Related features
Related Parameters
[Cell]AllowPsMove
[Ts]PDCHPrecedence
[Cell]SfPreferBusyThs
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
4-347
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS channel expand
Abbreviation
Info1_1_18
3GPP Name
None
3GPP Reference
None
This parameter indicates whether PS channel extension is supported.
For example, if the current number of channels that are used by MS
is 2+1 while the MS is allowed to use more time slots, the number of
channels can be increase to 3+1 or 4+1 after the adjacent CS channels
Description
are released.
Managed Object
Cell
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]Info1_1_24
Relationship
Set the switch of channel extension to "Yes", and the TCH channel
threshold will be effective during PS channel extension.
Related Interfaces
None
Impact on Equipment
Impact on service
4-348
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->GPRS Channel
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_24
3GPP Name
None
3GPP Reference
None
When the proportion of TCH channel in a cell is higher than this threshold, PS channel extension will be conducted. The proportion of idle TCH
channels in a cell is the ratio of the sum of idle TCH/F channels and TCH/H
channels (two TCH/H channels are regarded as one TCH/F) to the num-
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
20
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]Info1_1_18
Relationship
Set the switch of channel extension to "Yes", and the TCH channel
threshold will be effective during PS channel extension.
Related Interfaces
None
Impact on Equipment
4-349
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxPsUserPerTs_0
3GPP Name
None
3GPP Reference
None
This parameter describes the maximum number of PS uplink users
allowed by a single timeslot.
If the packet traffic is large on site, hardware load is high, and capacity
expansion is impossible temporally, the user can modify this parameter
to reduce the number of uplink packet users supported by the channel.
In this way, the packet traffic volume is reduced indirectly, which helps
reduce the hardware load.
If this value is reduced, the KPI index of the packet service, such as
Description
Managed Object
Cell
1..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
influenced.
Adjustment Suggestion
Change Mode
Offline
4-350
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxPsUserPerTs_1
3GPP Name
None
3GPP Reference
None
This parameter describes the maximum number of PS downlink users
allowed by a single timeslot.
The PS with a single TS supports a maximum of 16 users at downlink.
The traffic is proper, and the default value is 6. The traffic can be
adjusted in accordance with the traffic. If this value is reduced, the KPI
index of the packet service, such as downlink TBF link success rate, is
reduced indirectly. If the downlink TBF link setup success rate of packet
services is low and the packet channel resources can satisfy users'
Description
Managed Object
Cell
1..16
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
4-351
SJ-20100524164252-017|2011-07-28 (R1.4)
If the value is small, it causes radio resources congestion when the data
traffic is busy, thereby the uplink TBF establishment success rate is
Configuration Rule and
influenced.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS handover support
Abbreviation
HandoverSupp
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether the cell supports MS to perform PS
Description
handover.
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
4-352
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]RlcStateReset
[Cell]EnablePCCNTrigHO
Relationship
The service function parameters used by the PS handover are valid until
this parameter is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HOCommandAck
3GPP Name
None
3GPP Reference
None
This parameter describes whether PS HANDOVER COMMAND requires
Description
acknowledgement.
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
4-353
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BlindTransSupp
3GPP Name
Blind Transmission
3GPP Reference
3GPP TS 43.129
This parameter describes whether the cell supports blind transmission.
The blind transmission means the target cell begins to transmit downlink
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OptimizeHOSupp
3GPP Name
None
3GPP Reference
None
This parameter describes whether the optimized handover is supported
in the cell that supports PS handover.
If the optimized handover is allowed, it is necessary to decide whether
the serving cell and the target cell have the same NSE and RA. If they
have the same NSE and RA, and relevant QoS information (including
PFI, PFT, ABQP, and AR) is obtained, perform optimized handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
4-355
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SendAccessSync
3GPP Name
PS Handover Access
3GPP Reference
3GPP TS 43.129
This parameter indicates whether the handover message should be sent
during synchronization handover.After the MS receives the PS handover
message, it performs handover to the channel allocated in the new cell.
For example, if the PS HANDOVER COMMAND message carries Handover Reference, the MS will send the PS HANDOVER ACCESS mes-
Description
sage to BSS.
Managed Object
Cell
0: No;
1: Yes
4-356
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SendAccessPreSync
3GPP Name
PS Handover Access
3GPP Reference
3GPP TS 43.129
This parameter describes whether the PS HANDOVER ACCESS message should be sent during the pre-synchronization handover.After the
MS receives the PS handover message, it performs handover to the channel allocated in the new cell. For example, if the PS HANDOVER COMMAND message carries Handover Reference, the MS will send the PS
Description
Managed Object
Cell
4-357
SJ-20100524164252-017|2011-07-28 (R1.4)
0: No;
Value Range and Step
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Reset RLC
Abbreviation
RlcStateReset
3GPP Name
RLC_RESET
3GPP Reference
3GPP TS 44.060
This parameter indicates whether the state of RLC should be reset. That
is, the related variables of the RLC layer entity keep the same when the
Description
Managed Object
Cell
0: No; 1: Yes
4-358
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EnablePCCNTrigHO
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether to use PCCN to trigger PS handover.
That is, BSC makes PS handover decison when it receives PCCN (Packet
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
4-359
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EarlyGetSysIntra
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0: No;
Value Range and Step
1: Yes
Unit
None
Default Value
Yes
4-360
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GttpLapdmNum
3GPP Name
MAX_LAPDm
3GPP Reference
Description
4-361
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0...7
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]DTMSupport
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EgprsPacketChreq
3GPP Name
EGPRS_PACKET_CHANNEL_REQUEST
3GPP Reference
4-362
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter information is broadcast to the MS in GRPS CELL OPTIONS of SI13, PSI1 and PSI13. It indicates if the cell supports EGPRS_PACKET_CHANNEL_REQUEST access flow. If the cell supports
EGPRS and this flow, the EGPRS terminal is able to originate EGPRS
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The system default uses forcible two phase access, so this function
Configuration Reason
is not enabled.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IrSupportUp
3GPP Name
RESEGMENT
3GPP Reference
4-363
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates whether the cell supports "uplink IR quality control".If it supports, the network could set the RESEGMENT in
PACKET UPLINK ACK/NACK, PACKET UPLINK ASSIGNMENT and
PACK TIMESLOT RECONFIGURE message as FALSE to inform MS
system of using IR quality control mode, and MS uplink retransmission
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
ZGO-03-05-002 EGPRS Link Adaptation
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreemptivetRans
3GPP Name
PRE_EMPTIVE_TRANSMISSION
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
PENDING-ACK status have been sent, repeat from the oldest one.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-365
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
BEPperiodUp
3GPP Name
BEP_PERIOD
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-366
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
BEPperiodDown
3GPP Name
BEP_PERIOD
3GPP Reference
Description
the value of the factor is defined by the average period of BEP filter.
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10
Unit
None
Default Value
Default Value
The default value is dependent upon the value range defined in the
Configuration Reason
Adjustment Suggestion
reliable.
The relatively small value helps adjust the coding mode when the radio
environment changes accidentally.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
0
4-367
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
OMC Access Path
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->EDGE parameters
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LinkQuameaMode
3GPP Name
LINK_QUALITY_MEASUREMENT_MODE
3GPP Reference
Description
Managed Object
Cell
(0, 1, 2, 3)
Unit
None
Default Value
Default Value
Configuration Reason
4-368
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_1_0
3GPP Name
None
3GPP Reference
None
This parameter indicates whether EDGE initial downlink allocation is
in accordance with multi-slot class 1.If it is, the initial allocation only
allocates one timeslot in accordance with multi-slot class 1; if it isn't, the
initial allocation allocates one or more timeslots in accordance with the
actual multi-slot capability.
Description
Managed Object
Cell
1: Yes; 0: No
4-369
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
The default value is to ensure the service rate of small bust packages.
If the PDCHs and Abis resources are enough, set the value as No; if the
Adjustment Suggestion
PDCHs and Abis resources are not enough, set the value as Yes.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_7_5
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether to use the parameter of 'EGPRS Prior
to GPRS' in the cell. When the EGPRS prior to GPRS function is enabled
and this parameter is set to Yes, the cell-level allocating weights of EGPRS parameter is used. The number of blocks allocated to EGPRS and
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
4-370
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]Info_4_6
[BSC]Info1_7_6
This parameter is valid until the Info_4_6 parameter is enabled; The
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info1_7_6
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the allocating weights of EGPRS for a
cell.When the EGPRS prior to GPRS function is enabled and this
parameter is set to Yes, the cell-level allocating weights of EGPRS
parameter is used. The number of blocks allocated to EGPRS and
GPRS are adjusted according to a certain ratio.
If the value is 0, the cell EGPRS service fails to get blocks. If the value is
Description
4-371
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
70
Default Value
Configuration Reason
share the same channel, this parameter value is larger, the EDGE user
gets more radio blocks and the EDGE service rate is higher. The smaller
this parameter value is, the less radio blocks the EDGE user gets, and
the lower the EDGE service rate is. This parameter acts on the dynamic
and static data service channels.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]Info_4_6
[BSC]Info_4_7
[BSC]Info1_7_5
Relationship
This parameter takes effect until the parameters Info_4_6 and Info1_7_5
are enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-372
SJ-20100524164252-017|2011-07-28 (R1.4)
Coding
Full Name
coding scheme
Abbreviation
EGPRSInitAttSelt_0~EGPRSInitAttSelt_3
3GPP Name
None
3GPP Reference
None
This parameter indicates the initial coding scheme EGPRS subscribers
used. It is represented by a BYTE array, including EGPRS uplink initial
coding scheme, EGPRS downlink initial coding scheme, EGPRS uplink
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
transmission requirements.
If the cell radio quality is good, the initial coding scheme can be higher.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
4-373
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
InitAttachExch_1
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the coding method of EGPRS phones in
cell could be changed dynamically. The parameter bit1 indicates whether
Description
Managed Object
Cell
1: 1: : Yes; 0: No
Unit
None
Default Value
Yes
Default Value
The default value is set in accordance with the adaptive coding scheme
Configuration Reason
The value is better set to Yes in accordance with the adaptive coding
scheme of radio environment, so as to improve the packet transmission
rate.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
4-374
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
INFO1_4_0
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether FANR is supported by uplink TBF in
the cell.If the network and MS support FANR, the receiving information of
downlink radio blocks can be carried in uplink radio blocks and the network
can be timely informed of the receiving condition of downlink radio blocks,
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]INFO1_4_5
[BSC]Info_4_0
This parameter is valid until the Info_4_0 parameter is enabled; The
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-375
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
INFO1_4_1
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the downlink TBF in the cell supports
FANR.If the network and MS support FANR, the receiving information of
uplink radio blocks can be carried in downlink radio blocks and the network
can be timely informed of the receiving condition of uplink radio blocks, to
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]INFO1_4_4
[BSC]Info_4_1
This parameter is valid until the Info_4_0 parameter is enabled; The
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
4-376
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
DLDC support
Abbreviation
INFO1_4_2
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the cell supports downlink dual carrier.If
the network and MS support support downlink dual carrier, two carriers
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Trx]PairTrxId
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-377
SJ-20100524164252-017|2011-07-28 (R1.4)
RTTI support
Abbreviation
INFO1_4_3
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether to support RTTI function.
RTTI is relative to BTTI. BTTI is the basic transmission interval,
indicating to transmit one radio block with four consecutive bursts on
a channel in 20 ms.RTTI means to transmit one radio block with four
bursts on two channels in 10 ms, in which each channel provides two
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]RTTIPrefer
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-378
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
INFO1_4_4
3GPP Name
event-based FANR
3GPP Reference
3GPP TS 44.060
This parameter information is issued to MS in the packet downlink assignment, to indicate MS whether to use the event-based FANR. That is. MS
actively carries the received bitmap information of the downlink blocks in
the uplink radio block data after it finds that some of the downlink blocks
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-379
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
INFO1_4_5
3GPP Name
Internal
3GPP Reference
None
This parameter information is issued to MS in the packet uplink assignment, to indicate the uplink TBF using the SSN-based encoding. That is,
the received bitmap encoding uses the received block bitmap format in
Description
Managed Object
Cell
0: SSN-based encoding
1: TIME-based encoding
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-380
SJ-20100524164252-017|2011-07-28 (R1.4)
Bep_Period2 of uplink
Abbreviation
INFO1_4_6
3GPP Name
Internal
3GPP Reference
None
The protocol (45.008) stipulates the calculation formula of the measurement data. An oblivion factor whose value is defined by the average period of the BEP filter is used in the formula. This parameter is used to
calculate the uplink measurement data of a certain MS inside of PCU and
takes priority over the general parameter BEPperiodUp. If this parameter
Description
Managed Object
Cell
0..15
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Currently, this parameter is not used and does not need to be adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-381
SJ-20100524164252-017|2011-07-28 (R1.4)
Bep_Period2 of downlink
Abbreviation
INFO1_4_10
3GPP Name
BEP_PERIOD2
3GPP Reference
3GPP TS V45.008
This parameter information is issued to the MS in PACCH/DL. The
protocol (45.008) stipulates the calculation formula of the measurement
data. An oblivion factor whose value is defined by the average period
of the BEP filter is used in the formula. This parameter information
is applied to a certain MS and takes priority over the parameter
BEPperiodDown broadcast in the system message 13 and packet
system message 13.If this parameter is unavailable, the MS uses the
Description
parameter BEPperiodDown.
Managed Object
Cell
0..15
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Currently, this parameter is not used and does not need to be adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-382
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
EGPRS2AInitAttSelt_0
3GPP Name
Internal
3GPP Reference
None
This parameter represents the coding scheme initially used by EGPRS2A
Description
MS in the uplink.
Managed Object
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
None
Default Value
15: UAS9
Default Value
Configuration Reason
environment.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]EGPRS2AInitAttSelt_2
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EGPRS2AInitAttSelt_1
3GPP Name
Internal
3GPP Reference
None
This parameter represents the coding scheme initially used by EGPRS2A
Description
MS in the downlink.
Managed Object
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
20: DAS12
Unit
None
Default Value
17: DAS9
Default Value
Configuration Reason
environment.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
4-384
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EGPRS2AInitAttSelt_2
3GPP Name
Internal
3GPP Reference
None
This parameter represents the maximum coding scheme that can be used
Description
Managed Object
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
8: MCS5
9: MCS6
13: UAS7
14: UAS8
15: UAS9
16: UAS10
17: UAS11
Unit
None
Default Value
17: UAS11
Default Value
Configuration Reason
Adjustment Suggestion
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
[Cell]EGPRS2AInitAttSelt_3
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
EGPRS2AInitAttSelt_3
3GPP Name
Internal
3GPP Reference
None
This parameter represents the maximum coding scheme that can be used
Description
Managed Object
Cell
4: MCS1
5: MCS2
6: MCS3
7: MCS4
13: DAS5
14: DAS6
15: DAS7
16: DAS8
17: DAS9
18: DAS10
19: DAS11
4-386
SJ-20100524164252-017|2011-07-28 (R1.4)
20: DAS12
Unit
None
Default Value
20: DAS12
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InitAttachExch_2
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the coding method of GPRS/EGPRS
Description
Managed Object
Cell
0: No; 1: Yes
Unit
None
Default Value
1
4-387
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
The function is achieved in the subsequent versions and does not need
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
4-388
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 5
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
5-1
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Modifying
Version
Parameter
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
5-2
SJ-20100524164252-017|2011-07-28 (R1.4)
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Modifying
Version
Parameter
None
Modifying
Detail
None
TRX ID
Abbreviation
TrxId
3GPP Name
None
3GPP Reference
None
This parameter indicates the TRX number in the cell. According to
GSMspecifications, one cell can have 64 carriers at most.
Description
Managed Object
TRX
5-3
SJ-20100524164252-017|2011-07-28 (R1.4)
1..60
The maximum value of TrxId for each site type is as follows:
OB06: 48
BS20: 48
BS21: 48
BS21V20: 48
BS30: 48
BS30V12: 48
B8112: 54
M8202: 54
M8206: 54
B8018: 54
S8001: 1
Value Range and Step
SDR: 60
Unit
None
Default Value
Default Value
The OMC can generate these numbers sequentially and they do not
Configuration Reason
need sorting.
The OMC can generate these numbers sequentially and they do not
Adjustment Suggestion
need sorting.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Subcell ID
5-4
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SubCellId
3GPP Name
None
3GPP Reference
None
This parameter indicates the subcell ID that the carrier frequency belongs
Description
Managed Object
TRX
When the option "Use sub-cell (SubCellUsed)" is "No", the value range
is First Subcell;
When the option "Use sub-cell (SubCellUsed)" is "Yes", the value range
Unit
None
Default Value
First Subcell
Default Value
Configuration Reason
Adjustment Suggestion
modified.
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
[Cell]SubCellUsed
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RTTI preference
Abbreviation
RTTIPrefer
5-5
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether the carrier is preferentially selected by
the RTTI MS. If the carrier is, the MS supporting RTTI allocates the carrier
to perform services when it establishes RTTI TBF. If the MS that does not
support RTTI performs the PS service, the carrier is selected to allocate
Description
Managed Object
TRX
0: No; 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]Info_4_3
[TRX]INFO1_4_3
Relationship
This parameter is valid after the BSC-level switch and cell-level switch
with RTTIfunction are enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TRX type
Abbreviation
TrxType
3GPP Name
None
5-6
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
Common TRX is applied for common cell. extended TRX is applied
for extended cell.
In common cell, TRX Type shall be configured as Normal TRX;
In an extended cell without subcell support, the transceiver type should
be extended TRX; in an extended cell with subcell support, the subcell1
Description
Managed Object
TRX
1..2
1. Common TRX
2. Extended TRX
Step: 1
Unit
None
Default Value
Common TRX
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-7
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TrxPriority
3GPP Name
None
3GPP Reference
None
This parameter describes priorities for allocating carriers of the same type.
1 represents the highest priority. Select channels on carriers with high
Description
Managed Object
TRX
1..5
Step: 1
Unit
None
When BCCH carrier (BcchMark) parameter value is "No", the default
will be 3;
When BCCH carrier (BcchMark) parameter value is "Yes", the default
Default Value
will be 1.
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BcchMark
3GPP Name
None
3GPP Reference
None
One BCCH carrier frequency must be configured in a cell and it should
Description
Managed Object
TRX
0: No
1: Yes
Unit
None
Default Value
No
Default Value
The fixed attributes generated when the BCCH carrier has been
Configuration Reason
configured.
No need to modify.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwRreduction
5-9
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter represents the static power level of a transceiver. Usually
a static power control is added to the basis of TRX transmission power
level specified by PowerClass parameter. Namely, a restriction is added
to the maximum transmission power to get an actual maximum transmission power Pn used by the TRX. The dynamic power control is implemented based on the maximum transmission power Pn. This parameter
Description
Managed Object
TRX
Maximum output power, maximum output power -2dB, maximum output
power -4dB, maximum output power -6dB, maximum output power -8dB,
maximum output power -10dB, maximum output power -12dB, maximum
output power +1.5dB, maximum output power +1dB, maximum output
power +0.5dB
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-10
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Power level
Abbreviation
PowerClass
3GPP Name
power class(45.005)
3GPP Reference
45.005
This parameter indicates the power level of carrier. The value can be
converted to an actual power value used to calculate path loss and CI
Description
Managed Object
TRX
1..8 The power level corresponds with the transmission power in the
following relations:
1: 49 dBm
2: 49 dBm
3: 49 dBm
4: 49 dBm
5: 49 dBm
6, 7, 8: 46 dBm
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um, Abis
Impact on Equipment
0
5-11
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Support FHS
Abbreviation
SupportFHS
3GPP Name
hopping
3GPP Reference
3GPP TS 44.018
This parameter indicates whether frequency-hopping is supported.
When this parameter is set as 'Base band freqhop', 'BhGroupId' is
added to the interface. When this parameter is set as 'RFID freqhop',
'Frequency' disappears from the interface and 'FhsId' is added to the
interface.
Note: S8001 just has one frequency, and does not support frequency
Description
hopping.
Managed Object
TRX
When "BcchMark" is "No", the value range is "No", "Base band freqhop",
and "RFID freqhop".
When "BcchMark" is "Yes", the value range is "No" and "Base band
freqhop".
Unit
None
Default Value
No
Default Value
Configuration Reason
None
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
Related Parameters
None
5-12
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BhGroupId
Abbreviation
BhGroupId
3GPP Name
None
3GPP Reference
None
When the base band frequency hopping is configured, choose the ID of
frequency hopping group with base band frequency hopping. If there are
multiple transceivers configured with then same frequency hopping group
ID, the frequency points of these transceivers will be added to the systems
marked in the groups. The frequency hopping will use the same MA fre-
Description
Managed Object
TRX
1..255
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-13
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
FhsID
Abbreviation
FhsID
3GPP Name
None
3GPP Reference
None
When the base band frequency hopping is configured, choose the ID of
frequency hopping group with RFID frequency hopping. The transceiver
will use the MA frequency point list in the system when conducting fre-
Description
quency hopping.
Managed Object
TRX
1..255
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
5-14
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Frequency
Abbreviation
Frequency
3GPP Name
None
3GPP Reference
None
Description
Managed Object
TRX
TCH frequency point can reside on a different frequency band with
BCCH frequency point. The following describes the value range of the
frequency point:
Frequency band (FreqBand) is GSM900: 1 .. 124;
Frequency band (FreqBand) is EXT900: 0 .. 124, 975 .. 1023;
Frequency band (FreqBand) is DCS1800: 512 .. 885;
Frequency band (FreqBand) is PCS1900: 512 .. 810;
Frequency band (FreqBand) is GSM850: 128 .. 251
The TCH transceiver frequency point is not correlated with the FreqBand
parameter. The following describes the value range of frequency band:
TCH transceiver locates in GSM900 frequency band: 1 .. 124;
TCH transceiver locates in EXT900 frequency band: 0 .. 124, 975 ..
1023;
TCH transceiver locates in DCS1800 frequency band: 512 .. 885;
TCH transceiver locates in PCS1900 frequency band: 512 .. 810;
Unit
None
Default Value
None
Default Value
Configuration Reason
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Channel ID
Abbreviation
Channel ID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
TS
When "TRX type (TrxType)" is "Common TRX", eight timeslot numbers
are displayed on the interface, that is, 0, 1, 2, 3, 4, 5, 6, 7.
When "TRX type (TrxType)" is "Extended TRX", four timeslot numbers
Unit
None
Default Value
None
Default Value
Configuration Reason
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TS Channel Combination
Abbreviation
TS Channel Combination
3GPP Name
None
3GPP Reference
None
This parameter defines the combined types of timeslot channel.
Correlation with some parameters is as follows:
Cell broadcast short message (SmsCbUsed) supported:
If "CBC Supported (SmsCbUsed)" is "No", that is, CBC is not supported,
the system automatically finds all timeslot channel combinations in the
cell. If CBC channel exists, it is changed to SDCCH.
If "CBC Supported (SmsCbUsed)" is "Yes", that is, CBC is supported,
the system automatically finds all timeslot channel combinations in
the cell. If a non-BCCH channel is found for a carrier, it is changed to
SDCCH+CBCH.
GPRS service supported (PsSupport):
If "GPRS Supported (PsSupport)" is "No", that is, GPRS is not supported,
the system automatically changes all timeslot channels whose type is
PS in the cell to TCH.
Description
5-17
SJ-20100524164252-017|2011-07-28 (R1.4)
TS
0: TCH/F;
1: TCH/H(0, 1) + FACCH/H(0, 1) + SACCH/TH(0, 1);
3: SDCCH/8+SACCH/C8;
4: FCCH+SCH+BCCH+CCCH;
5: BCCH+SDCCH/4;
6: BCCH+CCCH;
7: BCCH+SDCCH/4+CBCH;
8: SDCCH+CBCH;
12: PBCCH+ PCCCH+PDTCH+PACCH+PTCCH;
13: PCCCH+PDTCH+PACCH+PTCCH;
14: PDTCH+PACCH+PTCCH
Unit
None
Default Value
0: TCH/F
Default Value
Configuration Reason
None
Change Mode
Offline
ZGB-03-02-005 Static Channel Management
ZGB-03-02-006 Dynamic Channel Management
Related features
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TSC
Abbreviation
TSC
3GPP Name
3GPP Reference
3GPP TS 45.002
This parameter represents Training Serial Code (TSC) of the timeslot.
There are eight types of TSC, with low mutual dependency. It is used
for reference of delay compensation for adaptive balance circuit at the
receiving side. For the timeslot which BCCH occupies, this parameter
Description
Managed Object
TS
0..7
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
5-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]BCC
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
MAIO
Abbreviation
MAIO
3GPP Name
3GPP Reference
3GPP TS 44.018
During the radio communication, the carrier number used on the air
interface is an element of the MA set. Mobile Allocation Index (MAI) (0
MAI n-1) is a variable used for determining a definite element in
the MA set.
According to the frequency hopping algorithm in GSM 05.02
specification, MAI is function of the following aspects: TDMA Frame
Number (FN) or Reduced TDMA Frame Number (RFN), frequency
Hopping Serial Number (HSN), and Mobile Allocation Index Offset
(MAIO). MAIO is an initial offset of MAI and is used for preventing
several channels to contend for the same carrier at the same moment.
Generally, several basic FH units (timeslot or TDMA frame) constitute an
FH group. They have the same MA and HSN and the only difference
among them is MAIO. Thus the same MA and HSN are put in FHS/MA
table. When the FH group corresponding to the timeslot has no
Description
Managed Object
TS
0..63
Step: 1
5-20
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.1.2.5 Dynamic TS
Full Name
Dynamic TS
Abbreviation
None
3GPP Name
None
3GPP Reference
None
"Yes" means that this time slot is dynamic. A dynamic time slot can
transform PDCH channel for PS services. It can also be applied to CS
services.
"No" means that this time slot is fixed.
This parameter appears at two places on OMC. One is used for batch
configurations on all the time slots in a carrier. And the other is used
Description
5-21
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
TS
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
None
3GPP Name
None
3GPP Reference
None
5-22
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
TS
255, 0..4
255: No preference
0: GPRS Preferred
1: EDGE Preferred
2: EDGE Dedicated
3: EGPRRS2-A Preferred
4: EGPRRS2-A Dedicated
Unit
None
Default Value
No preference
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
5-23
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PDCH Precedence
Abbreviation
PDCHPrecedence
3GPP Name
None
3GPP Reference
None
If this attribute of a dynamic timeslot is set as TRUE and is occupied by
PS services, the corresponding channel cannot used by CS services.
This configuration can improve the access performance index.
If the attribute of a dynamic timeslot is set as True and PSPrmpCSSupport
switch is turned on, PS services will grab the resources from CS services
when the radio resources are not enough.
This parameter appears at two places on OMC. One is used for batch
configurations on all the time slots in a carrier. And the other is used
Description
Managed Object
TS
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
5-24
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.1.2.8 TSC
Full Name
TSC
Abbreviation
TSC
3GPP Name
3GPP Reference
Description
as BCC value.
Managed Object
TRX
0~7
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
5-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PDCH
Abbreviation
PDCHPrecedence
3GPP Name
None
3GPP Reference
None
If this attribute of a dynamic timeslot is set as TRUE and is occupied by
PS services, the corresponding channel cannot used by CS services.
This configuration can improve the access performance index.
If the attribute of a dynamic timeslot is set as True and PSPrmpCSSupport
switch is turned on, PS services will grab the resources from CS services
when the radio resources are not enough.
This parameter appears at two places on OMC. One is used for batch
configurations on all the time slots in a carrier. And the other is used
Description
Managed Object
TS
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
5-26
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PS service preference
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the preference property among GPRS, EDGE
and EDGE2 services when a user is using PS services.
255: No preference All PS service types can be used.
0: GPRS Preferred When HybridOccuSupp switch is turned off, EDGE
services cannot use this channel. When HybridOccuSupp switch is
turned on, EDGE services can use the channel, but the priority is low.
1: EDGE Preferred When HybridOccuSupp switch is turned off, GPRS
services cannot use this channel. When HybridOccuSupp switch is
turned on, GPRS services can use the channel, but the priority is low.
Description
5-27
SJ-20100524164252-017|2011-07-28 (R1.4)
TS
255, 0..4
255: No preference
0: GPRS Preferred
1: EDGE Preferred
2: EDGE Dedicated
3: EGPRRS2-A Preferred
4: EGPRRS2-A Dedicated
Unit
None
Default Value
No preference
Default Value
Configuration Reason
Adjustment Suggestion
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-28
SJ-20100524164252-017|2011-07-28 (R1.4)
Dynamic TS
Abbreviation
Changeable
3GPP Name
None
3GPP Reference
None
"Yes" means that this time slot is dynamic. A dynamic time slot can
transform PDCH channel for PS services. It can also be applied to CS
services.
"No" means that this time slot is fixed.
This parameter appears at two places on OMC. One is used for batch
configurations on all the time slots in a carrier. And the other is used
Description
Managed Object
TS
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-29
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
TS PDCH-Pair Config
Abbreviation
ChannelPairChoice
3GPP Name
Internal
3GPP Reference
None
When the carrier is configured as supporting RTTI, this parameter indicates the channel pair choice. That is, which of the four pairs ( PAIR1,
Description
Managed Object
TRX
1: PAIR1=TS0 +TS1 configure
2: PAIR2 = TS2 +TS3 configure
3: PAIR3 = TS4 +TS5 configure
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]Info_4_3
[TRX]INFO1_4_3
Relationship
This parameter is valid after the BSC switch and cell switch with
RTTIfunction are enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-30
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.1.3 IP Parameters
5.1.3.1 Port No.
Full Name
Port No.
Abbreviation
None
3GPP Name
None
3GPP Reference
None
This parameter indicates the port number, which shall be allocated for
each carrier, and the number will be determined by the port actually con-
Description
figured.
Managed Object
TRX
1..3072
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrxGroupNo
3GPP Name
None
3GPP Reference
None
This parameter indicates the carrier frequency group ID. For IP site,
the parameter needs to be configured. For 100M platform, the number
of the carrier frequencies in a group should not be more than 16; for
1000M platform, the number of the carrier frequencies in a group should
Description
Managed Object
TRX
1..330
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-32
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LocalSwitchPort
3GPP Name
None
3GPP Reference
None
This parameter specifies the carrier port number for local switching. The
default value of this parameter is 0. When the global switch and the site
group switch are enabled, or the local switching in the site is enabled, the
Description
Managed Object
TRX
0..65535
0: invalid value
Other values: The parameter value is valid in the case of SDR access.
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
[BSC]LocalSwitchSup
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-33
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
TRX mode
Abbreviation
TRX Mode
3GPP Name
None
3GPP Reference
None
This parameter indicates the working mode of carrier, single-carrier or
dual-carrier mode, and decides whether to use four-way diversity on
uplinks and whether to use DPCT or DDT on downlinks. The SDR base
station does not support DDT.
Four-way diversity refers to Rx diversity that combines four ways of
diversity reception to achieve optimum gain and maximize the receiving
performance of base station uplinks. The base station can provide
ultra-broad coverage when four-way diversity reception is used along
with downlink Tx diversity.
DPCT refers to a formal carrier that is formed to get a transmit gain of
2.5dB after two transmitters produce the same bursts at the same time
and the pulses pass through a combiner. By using DPCT, the coverage
of cells can be expanded and downlinks can be intensified in rural areas.
Generally, DPCT can be used together with four-way diversity reception
or MRC to provide ultra-broad coverage.
DDT refers to downlink delay diversity transmission in which the two
transmitters in the dual-density carrier module of the BTS send the same
signals within short delays. The two transmitters are used as one virtual
transmitter to enhance downlink signals and achieve a downlink gain
of 3dB to 6dB. In this way, the coverage is expanded and intensified
by 20% or more.
Four-way diversity, DPCT, and DDT must be supported by suitable
Description
hardware.
Managed Object
Rack
5-34
SJ-20100524164252-017|2011-07-28 (R1.4)
Dual carrier
Single carrier with 4-ways diversity reception
Single carrier with 4-ways diversity reception and DPCT
Single carrier with 4-ways diversity reception and DDT
Value Range and Step
Single carrier
Unit
None
Default Value
Dual carrier
Default Value
Configuration Reason
Change Mode
Offline
ZGO-04-01-002 Delay Diversity Transmission & ZGO-04-01-003 Dual
Power Combining Transmission (DPCT) & ZGO-04-01-004 Four Way
Related features
Diversity Receiving(FWDR)
Related Parameters
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Delay count
5-35
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Delay count
3GPP Name
None
3GPP Reference
None
This parameter is used for the DDT function. It defines the number of symbols used for delayed transmission. This parameter is valid only when the
"TRX mode" parameter is "Single carrier with 4-ways diversity reception
Description
and DDT". The SDR base station does not support DDT.
Managed Object
Rack
0..15
Step: 1
Unit
None
Default Value
Default Value
This parameter is valid only when the "TRX mode" parameter is "Single
Configuration Reason
The higher the value is, the bigger the valid Delay Count range will be
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Rack]TRX Mode
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
IRC
Abbreviation
IRC
5-36
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter decides whether to use the IRC function.
Cleared: IRC unused
Selected: IRC used
Interference Rejection Combining (IRC) is an advanced interference
suppression algorithm and improved diversity reception mode that
suppress intra-frequency interferences based on their relevance to
improve signal reception, reduce bit errors, and upgrade the quality
of uplink services in GSM systems. Compared with Maximum Ratio
Combining (MRC), an uplink Rx algorithm which is widely used in current
networks, IRC can improve uplink signal reception, traffic access, traffic
holding, and traffic handover. In terms of frequency planning, using
IRC can effectively reduce uplink interferences, improve voice quality,
increase uplink data throughput, and decrease call drops in current
networks that are being expanded with more frequency multiplexing.
By default, the V3 software supports IRC, which cannot be enabled or
Description
Managed Object
Rack
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
5-37
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
None
3GPP Reference
None
This parameter indicates whether antenna hop is supported.
Support antenna hop: Different bursts of the same frequency are sent
by the base station Tx antennas (two or more) alternately to achieve
Description
Tx diversity.
Managed Object
Rack
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Rack]TRX Mode
Relationship
This parameter is valid only when the "TRX mode" parameter is 'Dual
carrier'.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
5-38
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Site Config->Site ID->Cell ID->Power Con-
trol->Power Control
5-39
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter
Modifying
Version
Parameter
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-40
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Set ID->BSC Function ID->Site Config->Site ID->Cell ID->Power Con-
Modifying
Version
Parameter
trol->Power Control
None
Modifying
Detail
None
Sub cell ID
Abbreviation
SubCellId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
5-41
SJ-20100524164252-017|2011-07-28 (R1.4)
Modifying
Version
Parameter
trol->Power Control
None
Modifying
Detail
None
Abbreviation
UIRapidPcInd
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter determines the availability of the rapid power control
process. Rapid power control is an optional function of BTS. It reduces
the interference of the radio system and satisfies the dynamic power
control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
parameter power control step (increase and decrease). The RapidPc
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
and the expected threshold. This power control mode can meet the
Adjustment Suggestion
needs of dynamic power control for rapid moving MS. However, it will
cause the transmission power for BTS or MS to adjust too quickly, which
will result in unsteady receiving signals.
Change Mode
Offline
Related features
Related Parameters
None
5-42
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DIRapidPcInd
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter determines the availability of the rapid power control
process. Rapid power control is an optional function of BTS. It reduces
the interference of the radio system and satisfies the dynamic power
control requirement for rapid moving MS.
The amplitude of power control used by rapid power control process
each time is no longer a fixed value, but an integer multiple of cell
parameter power control step (increase and decrease). The RapidPc
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
of RQ.
This power control mode can meet the needs of dynamic power control
for rapid moving MS. However, it will cause the BTS transmission power
to adjust too quickly, which will result in unsteady receiving signals.
Offline
5-43
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PwrDecrLimit
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter is set to prevent MS from call drop due to fast power
control. It corresponds to different quality level.
For example, PwrDecrLimit [0] determines the maximum power
decrease limit for calls with receiving quality level 0 (Bit Error rate (BER)
Description
Managed Object
Cell
The value range is 0..38.
Step: 2
Unit
dB
Default Value
10, 8, 6, 4, 2, 2, 2, 2
Default Value
When the rapid power control is conducted, get the middle value to
Configuration Reason
ensure the speed and to prevent the power from decreasing too quickly.
5-44
SJ-20100524164252-017|2011-07-28 (R1.4)
bigger and there will risks of call drops; if the value is adjusted lower,
Adjustment Suggestion
the power changing sensitivity will be smaller and the impact of power
control will be reduced.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PwrCtrlReportPrd
3GPP Name
None
3GPP Reference
3GPP TS 45.008
Power control is performed at BTS side and BSC implements relevant
performance statistics. BTS uses this parameter to decide the periodicity
to send the preprocessed power measurement to BSC as an input for
power control analysis. This parameter is in the unit of SACCH double
Description
frame.
Managed Object
Cell
The value range is 1..254.
The unit is SACCH double frame.
Step: 1
5-45
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
240
Default Value
BTS will report the control performance measurement result each 240
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcUlLevWindow
3GPP Name
None
3GPP Reference
3GPP TS 45.008
The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description
signal strength.
Managed Object
Cell
Unit
None
Default Value
5-46
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcUlLevWeight
3GPP Name
None
3GPP Reference
3GPP TS 45.008
5-47
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
The value range is 1..3.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
More precise
In the same period, FULL value is calculated from more sampling points
and it is more precise. SUB value is calculated from few sampling points,
so it is less precise. This parameter is not recommended to be modified.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-48
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDlLevWindow
3GPP Name
None
3GPP Reference
3GPP TS 45.008
PcUlLevWindow calculates the uplink signal strength.
Description
The window size for the average calculation is the number of samples.
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-49
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcdlLevWeight
3GPP Name
None
3GPP Reference
3GPP TS 45.008
According to GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
With DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots
in a measurement period in the non-DTX mode, and the other is the
average of the measurement results of some special timeslots in a
measurement period in the DTX mode. When downlink DTX is used,
BTS selects the sebset for average calculation; when downlink DTX is
not used, BTS selects the collective set for average calculation. This
parameter determines the weight for the first type of measurement data
when averaging downlink signal strength for power control. Weight for
Description
Managed Object
Cell
The value range is 1..3.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
More precise
In the same period, FULL value is calculated from more sampling points
and it is more precise. SUB value is calculated from few sampling points,
so it is less precise. This parameter is not recommended to be modified.
Change Mode
Offline
Related features
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcUlQualWindow
3GPP Name
None
3GPP Reference
3GPP TS 45.008
The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of uplink
Description
signal strength.
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.
5-51
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcUlQualWeight
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter determines the weight for the first type of measurement
data when averaging uplink signal quality for power control. Weight for
Description
Managed Object
Cell
The value range is 1..3.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
More precise
In the same period, FULL value is calculated from more sampling points
and it is more precise. SUB value is calculated from few sampling points,
so it is less precise. This parameter is not recommended to be modified.
Offline
5-52
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcDlQualWindow
3GPP Name
None
3GPP Reference
3GPP TS 45.008
The parameter PcUlLevWindow represents the window size (that is, the
number of sample values) used to calculate the average value of downlink
Description
signal quality.
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-53
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
The filtering wave for uplink measurement report becomes more smooth
if the window size is enlarged; the filtering wave for measurement report
becomes more sensitive if the window size becomes smaller.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDlQualWeight
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter determines the weight for the first type of measurement
data when averaging downlink signal quality for power control. Weight
Description
Managed Object
Cell
The value range is 1..3.
Step: 1
Unit
None
Default Value
5-54
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
More precise
In the same period, FULL value is calculated from more sampling points
and it is more precise. SUB value is calculated from few sampling points,
so it is less precise. This parameter is not recommended to be modified.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcDLInclLevThsN/PcDLInclLevThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving intensity is one of the factors which may lead to BTS (downlink) power
increase. If P out of N recent downlink signal strength averages are
less than the related threshold, the transmission power of BTS (down-
Description
link) should be increased, because the downlink signals are too weak.
Managed Object
Cell
5-55
SJ-20100524164252-017|2011-07-28 (R1.4)
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDLInclLevThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving intensity is one of the factors which may lead to BTS (downlink) power
increase. If P out of N recent downlink signal strength averages are
lower than the related threshold, the transmission power of BTS (down-
Description
link) should be increased, because the downlink signals are too weak.
5-56
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
The value range is 0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
requirement on site.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDLInclQualThsN/PcDLInclQualThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
5-57
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter falls into four categories: FR, HR, AFS and AHS.
Each category of voice version can be controlled separately. Downlink
receiving quality is one of the factors which may lead to BTS (downlink)
power increase. The decision process is the following: If P of N recent
downlink signal strength averages are higher than the related threshold,
the transmission power of BTS (downlink) should be increased, because
Description
Managed Object
Cell
The value range is 1..31
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcDLInclQualThsThs
5-58
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS.
Each category of voice version can be controlled separately. Downlink
receiving quality is one of the factors which may lead to BTS (downlink)
power increase. The decision process is the following: If P of N recent
downlink signal strength averages are higher than the related threshold,
the transmission power of BTS (downlink) should be increased, because
Description
Managed Object
Cell
The value range is 0..7.
Step: 1
Unit
None
Default Value
2, 2, 2, 2
Default Value
Configuration Reason
quality.
If this threshold is set too high, call drops will happen because of poor
MS receiving quality and the proportion of RQ will be impacted. If this
threshold is set too low, BTS power will increase because of light signal
interference and the downlink RQ quality will deteriorate further more.
The value range of the quality threshold can be modified based on the
practical uplink and downlink radio communication environment. If the
radio environment is not good, the value range of the quality threshold
can be modified to 0..1. The uplink and downlink transmission power
will be increasing with the raise of quality threshold level. At the same
time the mutual interference will increase, especially the downlink
interference. The proportion of the network performance index with the
value range RQ = 0..3 will increase due to the impact of power control.
When optimizing parameter settings, users need to get a balance
between the network performance index of RQ = 0..3% and the power
increment and interference.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
5-59
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDLRedLevThsN/PcDLRedLevThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving
signal strength is one of the factors which may lead to BTS (downlink)
power decrease. The decision process is as follows: If P of N recent
downlink signal strength averages are higher than the related threshold,
the transmission power of BTS (downlink) should be decreased, because
Description
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
5-60
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcDLRedLevThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving
signal strength is one of the factors which may lead to BTS (downlink)
power decrease. The decision process is as follows: If P of N recent
downlink signal strength averages are higher than the related threshold,
the transmission power of BTS (downlink) should be decreased, because
Description
Managed Object
Cell
The value range is 0..63.
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
requirement on site.
Change Mode
Offline
Related features
5-61
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcDLRedQualThsN/PcDLRedQualThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving quality is one of the factors which may lead to BTS (downlink) power
decrease. The decision process is as follows: If P of N recent downlink
signal quality averages are lower than the related threshold, the transmission power of BTS (downlink) should be decreased, because the downlink
Description
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
5-62
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcDLRedQualThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Downlink receiving quality is one of the factors which may lead to BTS (downlink) power
decrease. The decision process is as follows: If P of N recent downlink
signal quality averages are lower than the related threshold, the transmission power of BTS (downlink) should be decreased, because the downlink
Description
Managed Object
Cell
The value range is 0..7.
Step: 1
Unit
None
Default Value
0, 0, 0, 0
Default Value
Configuration Reason
quality.
5-63
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULInclLevThsN/PcULInclLevThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
signal strength is one of the factors which may lead to MS (uplink) power
increase. If P out of N recent uplink signal strength averages are lower
than the related threshold, the transmission power of MS (uplink) should
Description
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
3, 2
5-64
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULInclLevThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
signal strength is one of the factors which may lead to MS (uplink) power
increase. If P out of N recent uplink signal strength averages are lower
than the related threshold, the transmission power of MS (uplink) should
Description
Managed Object
Cell
The value range is 0..63.
Step: 1
Unit
None
5-65
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULInclQualThsN/PcULInclQualThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS.
Each category of voice version can be controlled separately. Uplink
receiving quality is one of the factors which may lead to MS (uplink)
power increase. The decision process is the following: If P of N recent
uplink signal quality averages are higher than the related threshold, the
transmission power of MS (uplink) should be increased, because the
Description
Managed Object
Cell
5-66
SJ-20100524164252-017|2011-07-28 (R1.4)
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULInclQualThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
5-67
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter falls into four categories: FR, HR, AFS and AHS.
Each category of voice version can be controlled separately. Uplink
receiving quality is one of the factors which may lead to MS (uplink)
power increase. The decision process is the following: If P of N recent
uplink signal quality averages are higher than the related threshold, the
transmission power of MS (uplink) should be increased, because the
Description
Managed Object
Cell
The value range is 0..7.
Step: 1
Unit
None
Default Value
2, 2, 2, 2
Default Value
Configuration Reason
quality.
If this threshold is set too high, call drops will happen because of poor
MS receiving quality and the proportion of downlink RQ will be impacted.
If this threshold is set too low, MS power will increase because of light
signal interference and the interference will further increase.
The value range of the quality threshold can be modified based on the
practical uplink and downlink radio communication environment. If the
radio environment is not good, the value range of the quality threshold
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULRedLevThsN/PcULRedLevThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
signal strength is one of the factors which may lead to MS (uplink) power
decrease. The decision process is as follows: If P of N recent uplink signal
strength averages are higher than the related threshold, the transmission
power of MS (uplink) should be decreased, because the uplink signals
Description
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-69
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULRedLevThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
signal strength is one of the factors which may lead to MS (uplink) power
decrease. The decision process is as follows: If P of N recent uplink signal
strength averages are higher than the related threshold, the transmission
power of MS (uplink) should be decreased, because the uplink signals
Description
Managed Object
Cell
The value range is 0..63.
Step: 1
Unit
None
Default Value
Default Value
In most cases, signal strength of -88 dbm .. -80 dbm is enough to support
Configuration Reason
uplink receiving signal strength is weak; if this threshold is set too high,
the uplink receiving power will be too high without power lowering. In
a indoor environment with weak coverage, this threshold should be
increased to avoid rapid signal attenuation.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-70
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcULRedQualThsN/PcULRedQualThsP
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
quality is one of the factors which may lead to MS (uplink) power decrease.
The decision process is as follows: If P of N recent uplink signal quality
averages are lower than the related threshold, the transmission power of
MS (uplink) should be decreased, because the uplink signal quality is too
Description
good.
Managed Object
Cell
The value range is 1..31.
Step: 1
Unit
None
Default Value
3, 2
Default Value
Configuration Reason
guaranteed.
If N and P values are high, BTS can average more level samples to raise
Adjustment Suggestion
Change Mode
Offline
Related features
5-71
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PcULRedQualThsThs
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter falls into four categories: FR, HR, AFS and AHS. Each
category of voice version can be controlled separately. Uplink receiving
quality is one of the factors which may lead to MS (uplink) power decrease.
The decision process is as follows: If P of N recent uplink signal quality
averages are lower than the related threshold, the transmission power of
MS (uplink) should be decreased, because the uplink signal quality is too
Description
good.
Managed Object
Cell
The value range is 0..7.
Step: 1
Unit
None
Default Value
0, 0, 0, 0
Default Value
Configuration Reason
quality.
5-72
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
PC increasing step
Abbreviation
PwrIncStep
3GPP Name
None
3GPP Reference
3GPP TS 45.008
It describes increase step, the value of each power control variation. Both
direction uses this parameter. There are four categories: FR, HR, AMR
Description
Managed Object
Cell
Unit
db
Default Value
Default Value
Configuration Reason
If this parameter is set too low, the uplink and downlink power increase
Adjustment Suggestion
will be too slow, thus voice quality problem will be brought up.
5-73
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
PC descreasing step
Abbreviation
PwrRedStep
3GPP Name
None
3GPP Reference
3GPP TS 45.008
It describes a decrease step, the value of each power control variation.
Both direction uses this parameter. There are four categories: FR, HR,
Description
Managed Object
Cell
Unit
db
Default Value
Default Value
Configuration Reason
If this parameter is set too high, there will be large fluctuation during
Adjustment Suggestion
Change Mode
Offline
Related features
5-74
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PwrControlUl
3GPP Name
None
3GPP Reference
3GPP TS 45.008
According to different demands from the network, object for the power
control can be chosen. If the MS transmission power needs to be adjusted
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjust the output power of MS to make BTS obtain the steady receiving
signal strength. Therefore, the interference from the same frequency
can be decreased and the power will be saved.
5-75
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
will be reduced.
Risks: If the uplink power control is not conducted in time, or the
parameter is not configured properly, voice quality problem will be
brought up and call drops will happen.
The initial power control rate for SDR base station is slow. It is
recommended to start fast average (fastavg) function.
Change Mode
Offline
Related features
Related Parameters
[Cell]FastAvg
Relationship
If fastavg function is enabled, the initial power control will speed up.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PwrControlDl
3GPP Name
None
3GPP Reference
3GPP TS 45.008
According to different demands from the network, object for the power
control can be chosen. If the BTS transmission power needs to be ad-
Description
5-76
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
BTS transmit with the highest power to ensure proper coverage and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]FastAvg
[Cell]PwrDynShare
1. Open the fastavg function to speed up the power control;
Relationship
2.If the BTS type is SDR and the "downlink power control"needs to be
enabled, choose "Yes" to make this parameter configurable.
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-77
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MsTxPwrMax
3GPP Name
MS_TXPWR_MAX_CCH
3GPP Reference
3GPP TS 45.008
During the communication between MS and BTS, the transmission
power of MS is controlled by the network. The network sets the power
for MS through the power command and the command is transmitted on
SACCH (SACCH has 2 header bytes, one is the power control byte and
the other is the TA byte).
An MS sets the specified output transmission power according to the
power control header extracted from the downlink SACCH. An MS uses
the closest possible output power if it cannot output the specified power.
During BSC power control, this parameter determines the maximum
transmission power available for MS in the cell. BSC also uses it to
calculate PBGT value. The highest power level for MS falls into four
Description
Managed Object
Cell
The value range is 0..31.
Step: 1
Unit
db
0 (1800 M)
Default Value
5 (900 M)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-78
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsTxPwrMin
3GPP Name
None
3GPP Reference
3GPP TS 45.008
During the communication between MS and BTS, the transmission
power of MS is controlled by the network. The network sets the power
for MS through the power command and the command is transmitted on
SACCH (SACCH has 2 header bytes, one is the power control byte and
the other is the TA byte).
An MS sets the specified output transmission power according to the
power control header extracted from the downlink SACCH. An MS uses
the closest possible output power if it cannot output the specified power.
During BSC power control, this parameter determines the minimum
transmission power (that is, lower limit of power control) available for MS
in the cell. The highest power level for MS falls into four categories:
Description
Managed Object
Cell
The value range is 0..31.
Step: 1
Unit
db
11 (1800 M)
Default Value
16 (900 M)
Default Value
Configuration Reason
if it is set too high, MS transmission power will be high and the uplink
interference will be brought up.
This parameter should be set higher to ensure the uplink receiving
signal strength.
5-79
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
BsTxPwrMin
3GPP Name
None
3GPP Reference
3GPP TS 45.008
This parameter controls the transmission power during communication
between MS and BTS. BTS must be configured with the output power
specified by the the power control command. When BSC is performing
power control, this parameter is the minimum transmission power (that
is, lower limit of power control) that can be used by BTS in the cell.
The maximum power level of BTS is Pn.
l 0: Pn;
l 1: Pn-2 dB;
...
Description
l 15: Pn-30 dB
Managed Object
Cell
The value range is 0..15.
Step: 1
Unit
dB
Default Value
10
5-80
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
This parameter indicates the range of power adjustment for BTS. It is not
Adjustment Suggestion
good to lower the downlink interference if the parameter is set too high.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PcMinInterval
3GPP Name
None
3GPP Reference
3GPP TS 45.008
For SDR base station, this parameter indicates the interval between the
initial state to the steady state for BTS power control. This parameter
specifies the minimum interval of power control. Usually, two survey
reports with the original transmission power will be received after power
control. The signal level information in the reports is not accurate
and thus should be ignored (other information such as adjacent cell
information is still valid), therefore there should be a minimum interval of
power control, and signal level information is ignored in this period.
For V3 base station, this parameter indicates the interval between the
initial state to the steady state for BTS power control. Two conditions
must be met when a BTS changes from the initial state to the steady
Description
state: 1) If the transmission power has not been lowered for N1 times,
5-81
SJ-20100524164252-017|2011-07-28 (R1.4)
the next measurement report will be the steady state. 2) If the BTS still
remains in the initial state after N2-1 measurement report have been
received, the N2 measurement report will enter the steady state.
If the parameter is set between 4..17, the N2 value equals to this
parameter.
If this parameter is set lower than 4, the corresponding N2 values is
11 measurement reports;
If this parameter is set lower than 17, the corresponding N2 values is
17 measurement reports;
Managed Object
Cell
The value range is 1..32.
Step: 1
Unit
None
Default Value
2
SDR base station will abandon the wrong measurement reports and
Default Value
Configuration Reason
V3 base station will at the same time ensure the correctness of power
control and the speed of initial power control.
For SDR base station, the incorrect 2 measurement reports will
Adjustment Suggestion
recommended to be modified.
For V3 base station, the parameter is not recommended to be modified.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-82
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PwrDynShare
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the dynamic power sharing function is
Description
enabled.
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
switch. The switch can improve the utilization of cell power resources. A
Adjustment Suggestion
carrier wave with low transmission power shares its margin power with
the carriers waves that need high transmission power.
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrControlDl
Relationship
If the BTS type is SDR and the downlink power control is enabled,
choose "Yes" to make to parameter configurable.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-83
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PwrPres
3GPP Name
None
3GPP Reference
None
This parameter indicates the reserved power volume, which is the gain
level added to currently applied power. The 0, 1, 2, 3, 4 respectively
Description
Managed Object
Cell
Unit
None
Default Value
0[0]
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.2.4.11 Power for initial access users, level of dB based on TRX power (InitAccessPwr)
Full Name
5-84
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InitAccessPwr
3GPP Name
None
3GPP Reference
None
This parameter indicates the initial downlink power. The highest carrier
Description
Managed Object
Cell
0..15
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
parameter increases.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InitDLPwrRedStep
3GPP Name
None
5-85
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter adjusts the initial downlink power attenuation level for the
TCH channel based on the measurement report for the SDCCH channel.
Description
This parameter take effect after the dynamic power sharing is enabled.
Managed Object
Cell
0, 1, 2
Unit
2 dB
Default Value
Default Value
Configuration Reason
2 db is a reasonable extent.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]PwrDynShare
Relationship
The parameter takes effect when the dynamic power sharing function
is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
InitDLPwrInclLevThs
3GPP Name
None
3GPP Reference
None
5-86
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the lower limit value for SD channel level that is
a reference to TCH initializing downlink power. If the MS receiving level
in SD channel survey report is lower than this value, the MS receiving
signal intensity is weak, thus the initializing transmission power of TCH
Description
Managed Object
Cell
0 .. 63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
22
Default Value
If the access power is lower than -88dBm, the signal is weak and cannot
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PwrDynShareSupport_1
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-87
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InitDLPwrlRedLevThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the SD channel level threshold that is a reference to TCH initializing downlink power. If the MS receiving level in SD
channel survey report is higher than this value, the MS receiving signal
intensity is strong, thus the initializing transmission power of TCH channel
Description
can be reduced.
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
55
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrDynShare
Relationship
The parameter takes effect when the dynamic power sharing function
is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-88
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InitDLPwrInclQualThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the upper limit quality value for SD channel
that is a reference to TCH initializing downlink power. If the MS quality
in SD channel survey report is higher than this value, the MS receiving
quality is poor, thus the initializing transmission power of TCH channel
Description
cannot be reduced.
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
If the quality level is higher than 2, the power cannot be reduced any
Configuration Reason
more.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]PwrDynShareSupport_1
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-89
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InitDLPwrlRedQualThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the SD channel quality threshold that is a reference to TCH initializing downlink power. If the quality level in SD channel
survey report is lower than this value, the MS receiving quality is good
(with low Bit Error Rate), thus the initializing transmission power of TCH
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
The TCH initializing downlink power can be reduced under the best
Configuration Reason
access quality.
The quality level will be lowered due to decrease of downlink power, so
the quality level threshold should not be set too low. The transmission
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrDynShare
Relationship
The parameter takes effect when the dynamic power sharing function
is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
5-90
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PwrAdjustThreshold
3GPP Name
None
3GPP Reference
None
This parameter indicates the congestion control threshold. When BSC
detects that a current service on RRU occupies a certain percentage of
the RRU total power, the congestion control is enabled (handout CS ser-
Description
vices).
Managed Object
Cell
50..100
Step: 1
Unit
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrAdmitThrldPunish
[Cell]PwrAdmitThreshold
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-91
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PwrAdmitThreshold
3GPP Name
None
3GPP Reference
None
This parameter indicates the congestion control threshold. When BSC
receives a new service application, the service cannot be accepted if the
power needed by the current service and the new service reaches a
certain percentage of the total RRU power. The acceptance judgment
Description
Managed Object
Cell
10..100
Step: 1
Unit
Default Value
90
Default Value
When the power percentage is 90%, RRU power is reaches the limit and
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrAdjustThreshold
[Cell]PwrAdmitThrldPunish
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-92
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrAdmitThrldPunish
3GPP Name
None
3GPP Reference
None
This parameter indicates the punishment extent against the power
access control threshold. When a service is kicked out due to RRU
congestion in a time slot, a new service will be introduced immediately,
which cause the RRU to switch between congestion and smooth state.
At this time, the access threshold has a punishment decrease for a
Description
period of time and the decrease extent equals with the parameter value.
Managed Object
Cell
0..50
Step: 1
Unit
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrAdjustThreshold
[Cell]PwrAdmitThreshold
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-93
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrAdmitPunishTime
3GPP Name
None
3GPP Reference
None
This parameter indicates the punishment period of time against the power
access control threshold. When a service is kicked out due to RRU congestion in a time slot, a new service will be introduced immediately, which
cause the RRU to switch between congestion and smooth state. At this
time, the access threshold has a punishment decrease and the period of
Description
Managed Object
Cell
0..255
Step: 1
Unit
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-94
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrAdjPriority_0
3GPP Name
None
3GPP Reference
None
When the congestion control with the power sharing happens, this parameter is applied in the congestion control algorithm with priority 1 (highest
Description
priority).
Managed Object
Cell
0: invalid algorithm. No congestion control
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrDynShare
Relationship
The parameter takes effect when the dynamic power sharing function
is enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-95
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SS_BTS
3GPP Name
SSb
3GPP Reference
3GPP TS 45.008
This parameter is used for the uplink open-loop power control of GPRS.
SSb = P - L = T0 - CH - PBTS - 48
Where,
PBTS = BTS max output power
P = MS output power
L = Path loss
TCH is a special power control parameter of the MS and channel and
is sent to the MS in an RLC control message.
T0 = 39 dBm for GSM 400, GSM 700, GSM 850 and GSM900
Description
Managed Object
Cell
0..63
The specific meanings are:
0: -110 dBm;
1: -109 dBm
......
63: -47 dBm;
Step: 1
Unit
None
Default Value
40
Default Value
Configuration Reason
5-96
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
UlPwCtrl
3GPP Name
Internal
3GPP Reference
None
This parameter determines the uplink power control policy of GPRS., including the following four modes: No control, Open-loop control, Close-
Description
Managed Object
Cell
0: No control
1: Open-loop control
2: Close-loop control
Unit
None
Default Value
Default Value
Configuration Reason
5-97
SJ-20100524164252-017|2011-07-28 (R1.4)
value can be set to 1 when the uplink open-loop power control should
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
DlPwCtrl
3GPP Name
Internal
3GPP Reference
None
This parameter determines the downlink power control strategy of GPRS ,
including the following four modes: No control, Open-loop control, Close-
Description
Managed Object
Cell
0: No control
1: Open-loop control
2: Close-loop control
Unit
None
Default Value
5-98
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwCtrlMode
3GPP Name
BTS_PWR_CTRL_MODE
3GPP Reference
3GPP TS 45.008
This parameter indicates the BTS downlink power control modes, A and
B.In power control mode A, the power of each radio block on the channel
is calculated in accordance with that of the MS to which the radio block
belongs. In power control mode B. the radio blocks belonging to different
Description
Managed Object
Cell
0: Mode A
1: Mode B
Unit
None
Default Value
5-99
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwCtrlLev
3GPP Name
Internal
3GPP Reference
None
This parameter determines the power control precision of GPRS, describing the nominal output power and power control precision (dB) sent by the
MS under each power control level.Currently, this parameter is not used
Description
Managed Object
Cell
0..31
Step: 1
Unit
db
Default Value
5-100
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Currently, this parameter is not used in this version and does not need
Configuration Reason
to be adjusted.
Currently, this parameter is not used and does not need to be adjusted.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
P0
3GPP Name
P0
3GPP Reference
Description
previous assignment.
Managed Object
Cell
5-101
SJ-20100524164252-017|2011-07-28 (R1.4)
0..15
0: P0 = 0 dB;
1: P0 = 2 dB;
...
15: P0 = 30 dB
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
higher the P0 value, the lower the BTS transmission power; the lower
Adjustment Suggestion
the P0 value, the higher the BTS transmission power. Set it based on
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-102
SJ-20100524164252-017|2011-07-28 (R1.4)
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
This parameter means the site ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Handover Con-
Modifying
Version
Parameter
Detail
trol->Handover Pretreatment
None
Modifying
None
BTS ID
5-103
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Handover Con-
trol->Handover Pretreatment
5-104
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter
Modifying
Version
Parameter
None
Modifying
Detail
None
Handover control ID
Abbreviation
HocId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Handover Con-
Modifying
Version
Parameter
Detail
trol->Handover Pretreatment
None
Modifying
None
5-105
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ZeroAllowed
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, MS can only report the
measurement data of six adjacent cells with the strongest signal
strength. Therefore, the measurement results of adjacent cells recorded
by BSC may be discontinuous, and the measurement data of the missing
cells shall thus be recorded as 0 (that is, less than -110dBm).
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor.
If the number of zeroes in used for average calculation exceeds Number
of zero allowed in AV, then measurement average equals to sum of
reported values divided by Neighboring cell.
To be specific, during averaging, if the count of 0s in the sampling count
exceeds "ZeroAllowed", these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed "ZeroAllowed", these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
(NCellWindow the count of 0s).
Description
Managed Object
Cell
0..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
5-106
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevWindow
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter is the window size (number of sample values) used to
calculate the average value of uplink signal intensity.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-107
SJ-20100524164252-017|2011-07-28 (R1.4)
If the value is set too small and samples of handover decision are few,
Configuration Rule and
Adjustment Suggestion
If the value is set too large, it takes a long time to make handover
decisions and call drop occurs easily caused by handover delays.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevWeight
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
Description
5-108
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
is relatively high.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevWindow
5-109
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
The parameter of handover downlink intensity average window
"HoDlLevWindow" is the size of the window used to calculate the
average value of downlink signal strength. This size is the number of
samples used in averaging.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
5-110
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoDlLevWeight
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate. Therefore, BSC, when averaging
the measurement values, uses different weights for the two types of
measurement data.
This parameter HoDlLevWeight determines the weight for the first
type of measurement data when averaging downlink signal strength
for handover. Weight for the second type of measurement data is set
to 1 by default.
Description
Managed Object
Cell
1..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
is relatively high.
Change Mode
Offline
5-111
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualWindow
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
This parameter represents the window size (number of sample values)
used to calculate average value of uplink signal quality.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
If the value is set too small and samples of handover decision are few,
Configuration Rule and
Adjustment Suggestion
If the value is set too large, it takes a long time to make handover
decisions and call drop occurs easily caused by handover delays.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualWeight
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
Description
5-113
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
is relatively high.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualWindow
3GPP Name
Hreqave
5-114
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
The parameter of handover downlink quality average window
"HoDlQualWindow" is the size of the window used to calculate the
average value of downlink signal quality. This size is the number of
samples used in averaging.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
5-115
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoDlQualWeight
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, discontinuous transmission (DTX)
refers to the process in which the system does not transmit signals in the
voice intermittent period during the subscriber communication process.
In the DTX mode, the measurement data reported to BSC fall into two
types. One is the average of the measurement results of all timeslots in a
measurement period in the non-DTX mode, and the other is the average
of the measurement results of some special timeslots in a measurement
period in the DTX mode. BSC needs to optionally select one type of
measurement data and use the data to calculate the average value.
The first type of measurement data is the average of the measurement
results of all timeslots, and it is accurate. But the second type of
measurement data is the average of the measurement results of some
timeslots, and it is less accurate. Therefore, BSC, when averaging
the measurement values, uses different weights for the two types of
measurement data.
Parameter HoDlQualWeight determines the weight for the first type of
measurement data when averaging downlink signal quality for handover.
Weight for the second type of measurement data is set to 1 by default.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
is relatively high.
Change Mode
Offline
Related features
5-116
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Distance
Abbreviation
DistanceWindow
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover decision according to the
measurement data. To avoid the negative impact of burst measurement
values resulting from complicated radio transmission, BSC, when
making handover decision, no longer uses the original measurement
data but uses a series of average values of the measurement data.
The parameter of sampling count of distance "DistanceWindow" is the
size of the window used to calculate the average value of the distance
from MS to BTS (actually the Time Advance, TA). This size is the number
of samples used in averaging.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
5-117
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Neighboring cell
Abbreviation
NCellWindow
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
5-118
SJ-20100524164252-017|2011-07-28 (R1.4)
handover.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-119
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
NCELLWINDOWEMERG
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the SDCCH handover of GSM system, BSC makes handover
decision according to the measurement data. To avoid the negative
impact of burst measurement values resulting from complicated radio
transmission, BSC, when making handover decision, no longer uses the
original measurement data but uses a series of average values of the
measurement data.
This parameter indicates the size of the window used to calculate
the average value of adjacent cell signal strength during emergency
handover. This size is the number of samples used in averaging.
The emergency handover includes quality handover, level handover,
intra-cell interference handover, uplink signal rapid attenuation handover,
downlink quality rapid drop handover, and handover from the second
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-120
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-121
SJ-20100524164252-017|2011-07-28 (R1.4)
The larger the value is, the higher is the accuracy of handover decision,
the lower is the realtime; The smaller the value is, the lower is the
accuracy of handover decision, the higher is the realtime.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoUlLevP
Relationship
HoUlLevP<=HoUlLevN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevP
3GPP Name
None
3GPP Reference
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
smaller the value is, the easier the handover is.If the value is too large,
Adjustment Suggestion
quantity of call drops rises easily. If the value is too small, number of
The larger the value is, it is more difficult to perform handover. The
Offline
Related features
Related Parameters
[Cell]HoUlLevN
Relationship
HoUlLevP<=HoUlLevN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevThs
3GPP Name
None
3GPP Reference
5-123
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63;
0: < -110 dBm;
1: (-110..-109)dBm;
......
62: (-49..-48)dBm;
63: < -48 dBm;
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
versa the handover is easier to occur.If the value is too large, quantity
Adjustment Suggestion
of call drops may rise. If the value is too small, excessive handovers
may occur.
Change Mode
Offline
Related features
Related Parameters
[Cell]PcUlInclLevThs
Usually the value of "HoUlLevThs" should be less than the threshold for
Relationship
uplink power control (increase). That is, perform power control first. If
power control does not work, perform handover.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-124
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The larger the value is, the more is the accuracy of handover decision,
the lower is the realtime; The smaller the value is, the less is the
accuracy of handover decision, the higher is the realtime.
5-125
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlLevP
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
5-126
SJ-20100524164252-017|2011-07-28 (R1.4)
1..20
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
smaller the value is, the easier the handover is.If the value is too large,
Adjustment Suggestion
quantity of call drops rise easily. If the value is too small, number of
The larger the value is, it is more difficult to perform handover. The
Offline
Related features
Related Parameters
[Cell]HoDlLevN
Relationship
HoDlLevP<=HoDlLevN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevThs
3GPP Name
None
3GPP Reference
5-127
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63;
0: < -110 dBm;
1: (-110..-109)dBm;
......
62: (-49..-48)dBm;
63: < -48 dBm;
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
versa the handover is easier to occur.If the value is too large, quantity
Adjustment Suggestion
of call drops may rise. If the value is too small, excessive handovers
may occur.
Change Mode
Offline
Related features
Related Parameters
[Cell]PcDlInclLevThs
Usually the value of "HoDlLevThs" shall be less than the threshold for
Relationship
downlink power control (increase). That is, perform power control first. If
power control does not work, perform handover.
Related Interfaces
None
Impact on Equipment
5-128
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The larger the value is, the higher is the accuracy of handover decision,
the lower is the realtime; The smaller the value is, the lower is the
accuracy of handover decision, the higher is the realtime.
5-129
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
[Cell]HoUlQualP
Relationship
HoUlQualP<=HoUlQualN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
5-130
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
smaller the value is, the easier the handover is.If the value is too large,
Adjustment Suggestion
quantity of call drops rises easily. If the value is too small, number of
unnecessary handovers may increase.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoUlQualN
Relationship
HoUlQualP<=HoUlQualN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualThs
3GPP Name
None
3GPP Reference
5-131
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..70
Step: 1
Unit
None
Default Value
49
Default Value
Configuration Reason
Generally, the quality is considered as poor when its level is above 49.
The value the larger is, the handover is more unlikely to occur, and vice
versa the handover is easier to occur.If the value is too large, quantity
Adjustment Suggestion
of call drops may rise. If the value is too small, excessive handovers
may occur.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-132
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoDlQualN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The larger the value is, the higher is the accuracy of handover decision,
the lower is the realtime; The smaller the value is, the lower is the
accuracy of handover decision, the higher is the realtime.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlQualP
Relationship
HoDlQualP<=HoDlQualN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-133
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
smaller the value is, the easier the handover is.If the value is too large,
Adjustment Suggestion
quantity of call drops rises easily. If the value is too small, number of
unnecessary handovers may increase.
Change Mode
Offline
5-134
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
[Cell]HoDlQualN
Relationship
HoDlQualP<=HoDlQualN
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualThs
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
0..70
Step: 1
5-135
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
49
Default Value
Configuration Reason
19.
The value the larger is, the handover is more unlikely to occur, and vice
versa the handover is easier to occur.If the value is too large, quantity
Adjustment Suggestion
of call drops may rise. If the value is too small, excessive handovers
may occur.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoUlLevN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
5-136
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
If the value is set too large, it takes a long time to make handover
decisions and call drop occurs easily caused by handover delays.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-137
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
IntraHoUlLevP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to the GSM specifications, handover decisions depend upon
the received average value. The uplink co-frequency interference is one
of the causes for handover. The decision process is as follows: If the
handover condition of uplink quality is met and P out of the N values (the
latest N average values of uplink signal strength) rise above relevant
threshold value, perform handover. The handover is due to strong uplink
co-frequency interference.
Parameter "IntraHoUlLevThs" defines the related threshold, parameter
"IntraHoUlLevN" defines the related N value, and parameter
"IntraHoUlLevP" defines the related P value.If this handover condition is
met, an internal handover is usually performed in the cell.
Usually the value of "IntraHoUlLevThs" shall be more than the threshold
for uplink power control (decrease).
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-138
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoDlLevN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to the GSM specifications, handover decisions depend upon
the received average value.
The downlink co-frequency interference is one of the causes for
handover. The decision process is as follows: If the downlink quality
condition for handover is met and P out of N recent downlink signal
strength averages are more than the related threshold, handover shall
be performed, because the downlink co-frequency interference is very
strong.
Parameter "IntraHoDlLevThs" defines the related threshold, parameter
"IntraHoDlLevN" defines the related N value, and parameter
"IntraHoDlLevP" defines the related P value.If this handover condition is
met, an internal handover is usually performed in the cell.
Usually the value of "IntraHoDlLevThs" shall be less than (or equal to)
the threshold for downlink power control (decrease).
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
5-139
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
If the value is set too large, it takes a long time to make handover
decisions and call drop occurs easily caused by handover delays.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoDlLevP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to the GSM specifications, handover decisions depend upon
the received average value.
The downlink co-frequency interference is one of the causes for
handover. The decision process is as follows: If the downlink quality
condition for handover is met and P out of N recent downlink signal
strength averages are more than the related threshold, handover shall
be performed, because the downlink co-frequency interference is very
strong.
Parameter "IntraHoDlLevThs" defines the related threshold, parameter
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
None
5-141
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
If the system has adopted concentric technology, handover decisions
are dependent upon a series of average values obtained.
Good C/I of the current special layer frequency is one of the causes for
concentric handover. The decision process is as follows: If the paging is
on common layer TRX frequency and P of the latest N C/I values raise
above the good C/I threshold, perform handover from common layer
TRX frequency to special layer TRX frequency.
Parameter "GoodCiThs" defines the related threshold, parameter
"GoodCiN" defines the related N value, and parameter "GoodCiP"
Description
Managed Object
Cell
Threshold: 0..25 Step: 1;
0: -127 dB
1: -126 dB
...
255: 128 dB
N value: 1..20 Step: 1
Unit
None
Default Value
[133, 3, 2]
Default Value
Configuration Reason
structure and employs the handover algorithm based on C/I. The smaller
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-142
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
None
3GPP Reference
None
If the system has adopted concentric technology, handover decisions
are dependent upon a series of average values obtained.
Bad C/I of the current special layer frequency is one of the causes for
concentric handover. The decision process is as follows: If the paging
is on special layer TRX frequency and P of the latest N C/I values fall
below the bad C/I threshold, then perform handover from special layer
TRX frequency to common layer TRX frequency.
Parameter "BadCiThs" defines the related threshold, parameter
"BadCiN" defines the related N value, and parameter "BadCiP" defines
Description
Managed Object
Cell
Threshold: 0..25 Step: 1;
0: -127 dB
1: -126 dB
...
255: 128 dB
N value: 1..20 Step: 1
Unit
None
Default Value
[130, 3, 2]
Default Value
Configuration Reason
structure and employs the handover algorithm based on C/I. The smaller
Adjustment Suggestion
Change Mode
Offline
Related features
5-143
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RapidHoThs
3GPP Name
None
3GPP Reference
None
During fast fading handover, some parameters shall be used. If the
measured signal intensity of a call is less than rapid handover threshold,
then it triggers handover of existing cell to most probable candidate cell.
"RapidHoThs" may be set as 15 (that is, -96 dBm .. -95 dBm) by default,
Description
Managed Object
Cell
0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
5-144
SJ-20100524164252-017|2011-07-28 (R1.4)
threshold should not be too large. MS will move to the area with high
Adjustment Suggestion
cell level soon. N value cannot be too large, otherwise the timeliness of
handover judgement will be influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
RapidHoN
3GPP Name
None
3GPP Reference
None
During fast fading handover, some parameters shall be used.
RapidHoN counter defines the minimum times for which the measured
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-145
SJ-20100524164252-017|2011-07-28 (R1.4)
threshold should not be too large. MS will move to the area with high
Adjustment Suggestion
cell level soon. N value cannot be too large, otherwise the timeliness of
handover judgement will be influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
DistanceN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to the GSM specifications, TCH handover decisions depend
upon the received average value.
The distance from MS to BTS is also one of the causes for handover.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
perform handover. The handover is due to MS being out of the cell
Description
service range.
Managed Object
Cell
1..20
Step: 1
Unit
None
5-146
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
[Cell]DistanceP
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
DistanceP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
5-147
SJ-20100524164252-017|2011-07-28 (R1.4)
service range.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
[Cell]DistanceN
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-148
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PBGTHoN
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-149
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PBGTHoP
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-150
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
DlQualRapidHoThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of downlink rapid quality drop.
Setting of the threshold is magnified 10 times, so as to reduce quality
drop span, and make the calculation of handover decision more
accurate.
If the threshold is smaller than 10, the quality is smaller than 1 and
equals to level 0; if the threshold is smaller than 20, the quality equals to
Description
Managed Object
Cell
Threshold: 8..70
Step: 1
Unit
None
Default Value
60
Default Value
Configuration Reason
The smaller is the threshold and value N, the easier is the quality
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
5-151
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
DlQualRapidHoN
3GPP Name
None
3GPP Reference
None
This parameter indicates the value N of downlink rapid quality drop.
Setting of the threshold is magnified 10 times, so as to reduce quality
drop span, and make the calculation of handover decision more
accurate.
If the threshold is smaller than 10, the quality is smaller than 1 and
equals to level 0; if the threshold is smaller than 20, the quality equals to
Description
Managed Object
Cell
Value N: 1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The smaller is the threshold and value N, the easier is the quality
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-152
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DistanceThs
3GPP Name
None
3GPP Reference
Description
service range.
Managed Object
Cell
Extended cell: 0..219
Normal cell: 0..63
Step: 1
Unit
None
Default Value
63
Default Value
Configuration Reason
Adjustment Suggestion
reports.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-153
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMinInterval
3GPP Name
None
3GPP Reference
None
This parameter specifies the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the inter-cell handover, but not common intra-cell or inter-cell
concentric handover.
Description
Managed Object
Cell
0..31
Step: 1
Unit
Default Value
Default Value
Configuration Reason
5-154
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HOMININTERVALEMERG
3GPP Name
None
3GPP Reference
None
This parameter specifies the interval value for which MS waits before
the actual inter-cell handover occurs. Such a timer is more predominant
for MS at the boundary regions between two cells, where inter-cell
handovers occur frequently. This parameter helps restrict frequent
inter-cell handover and guarantees call quality.
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
affects only the emergency inter-cell handover, but not common intra-cell
or inter-cell concentric handover.
The emergency handover includes quality handover, level handover,
Description
5-155
SJ-20100524164252-017|2011-07-28 (R1.4)
downlink quality rapid drop handover, and handover from the second
sub cell to the first sub cell.
Managed Object
Cell
0..31
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
value is adjusted as too large, call drop occurs due to handover failure.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HoBackPenalty
3GPP Name
None
3GPP Reference
None
5-156
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter describes the time limit for backward handover to the original cell. In other words, after handover is performed from cell A to cell
B, it is not allowed to perform backward handover from cell B to cell A.
This parameter is applicable to non-emergency handover. For emergency
Description
Managed Object
Cell
0..60
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HOBACKPENALTYEMERG
5-157
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter describes the time limit for backward handover to the
original cell. In other words, after emergency handover is performed
from cell A to cell B, it is not allowed to perform backward handover
from cell B to cell A.
The emergency handover includes quality handover, level handover,
intra-cell interference handover, uplink signal rapid attenuation handover,
downlink quality rapid drop handover, and handover from the second
Description
Managed Object
Cell
0..60
Step: 1
Unit
Default Value
15
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-158
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
LayerPriority
3GPP Name
Internal
3GPP Reference
None
This parameter decides the priority to select and sequence the candidate
cells for handover. Received signal level and signal quality decides the
candidate cells for handover. Three options are available:
First hand over to adjacent cells at the upper layer of the local cell, then
to those at the same layer, and finally to other adjacent cells;
Adjacent cells in the same layer of serving cell have the highest priority
for handover, then adjacent cells in the upper layer, and finally the other
adjacent cells.
All adjacent cells are treated in the same way.
This parameter determines to select one of above three methods.During
handover control process, this parameter has higher priority than normal
adjacent cells.
Value range:
1 (UPPER_LAYER): adjacent cell at above layer first, same layer next,
other adjacent cells finally;
2 (SAME_LAYER): adjacent cell at same layer first, above layer next,
other adjacent cells finally;
3 (ALL_LAYER): all adjacent cells are the same.
For micro-cell, option 1 is selected. When call in micro-cell is handed
over due to signal quality or signal strength, first handover to macro-cell
Description
Managed Object
Cell
1..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-159
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.3.3.7 Handover to same layer other band neighbour cell for PBGT permitted
(PbgtHoLayer_0)
Full Name
Handover to same layer other band neighbour cell for PBGT permitted
Abbreviation
PbgtHoLayer_0
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether it is allowed to perform PBGT handover
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
5-160
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.3.3.8 Handover to neighbour cell with no Layer Relation for PBGT permitted
(PbgtHoLayer_1)
Full Name
Abbreviation
PbgtHoLayer_1
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether it is allowed to perform PBGT handover
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Usually, after layers are set for the cell which needs PBGT handover, set
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-161
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.3.3.9 Handover to upper layer neighbour cell for PBGT permitted (PbgtHoLayer_2)
Full Name
Abbreviation
PbgtHoLayer_2
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether the PBGT handover to the upper layer
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
This parameter is used to make the lower layer absorb traffic easily.
Usually, handover to the upper layer adjacent cell is not allowed.After
this function is disabled, the traffic under special scenario can be shared
Adjustment Suggestion
and congestion can be alleviated, but the call drop rate and coverage
rate may be influenced..
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-162
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.3.3.10 Handover to under layer neighbor cell for PBGT permitted (PbgtHoLayer_3)
Full Name
Abbreviation
PbgtHoLayer_3
3GPP Name
Internal
3GPP Reference
None
This parameter describes whether the PBGT handover to the lower layer
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Layered structure is not set for the common network. The value is "No"
Configuration Reason
by default.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Synchronism
Abbreviation
HoPatternInd_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the configuration that whether the
synchronization handover is allowed in this cell.
If the time advance of the destination cell BSC obtained is equal to that of
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-164
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Asynchronism
Abbreviation
HoPatternInd_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the configuration that whether the
asynchronous handover is allowed in this cell.
If BSC is unable to obtain the time advance of the destination cell,
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-165
SJ-20100524164252-017|2011-07-28 (R1.4)
Pseudo-synchronism
Abbreviation
HoPatternInd_2
3GPP Name
None
3GPP Reference
None
This parameter indicates the configuration that whether the
pseudo-synchronization handover is supported in the cell.
If the MS is able to calculate the time advance of the target cell and it
supports pseudo-synchronization handover, the pseudo-synchronization
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-166
SJ-20100524164252-017|2011-07-28 (R1.4)
Pseudo-synchronism
Abbreviation
HoPatternInd_3
3GPP Name
None
3GPP Reference
None
This parameter indicates the configuration that whether the
pre-synchronization handover is allowed in this cell.
If BSC knows the time advance of the destination cell, and considers the
time difference when it issues handover command, pre-synchronization
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-167
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
DLRapidHoThs
3GPP Name
None
3GPP Reference
None
Downlink rapid handover decisions depend upon a series measurement
reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and
the offset, perform handover with the cause of downlink rapid handover.
This parameter DLRapidHoThs defines the threshold.
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
versa the handover is easier to occur.If the value is too large, quantity
Adjustment Suggestion
of call drops may rise. If the value is too small, excessive handovers
may occur.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-168
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoN
3GPP Name
None
3GPP Reference
None
SDCCH downlink rapid handover decisions depend upon a series
measurement reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and
the offset, perform handover with the cause of downlink rapid handover.
This parameter DLRapidHoN defines the value N.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The larger the value is, the more is the accuracy of handover decision,
the lower is the realtime; The smaller the value is, the less is the
accuracy of handover decision, the higher is the realtime.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoControl_23
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-169
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_0
3GPP Name
None
3GPP Reference
None
Downlink rapid handover decisions depend upon a series measurement
reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and
the offset, perform handover with the cause of downlink rapid handover.
This parameter DLRapidHoOffset_0 defines the offset threshold value
Description
for downlink rapid handover if the train speed is higher than 250km/hr.
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-170
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_1
3GPP Name
Internal
3GPP Reference
None
Downlink rapid handover decisions depend upon a series measurement
reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and
the offset, perform handover with the cause of downlink rapid handover.
This parameter DLRapidHoOffset_1 defines the offset threshold value
for downlink rapid handover if the train speed is between 150km/hr
and 250km/hr.
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-171
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_2
3GPP Name
None
3GPP Reference
None
Downlink rapid handover decisions depend upon a series measurement
reports received.
Downlink rapid is one of the causes for handover. The decision process
is as follows: If the latest successive N downlink level values (without
average processing) are larger than the sum of relating threshold and
the offset, perform handover with the cause of downlink rapid handover.
This parameter DLRapidHoOffset_2 defines the offset threshold value
Description
for downlink rapid handover if the train speed is lower than 150km/hr.
Managed Object
Cell
0..63
Step: 1
5-172
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]HoControl_23
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_23
3GPP Name
None
3GPP Reference
None
This parameter determines whether downlink rapid handover is allowed
to enable.
Description
Managed Object
Cell
5-173
SJ-20100524164252-017|2011-07-28 (R1.4)
0: No;
Value Range and Step
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
high-speed scenario.
This handover is mainly applied to the high-speed scenario. This
handover algorithm requires the areas along the railway are covered
by sites in link shape, and the adjacent cell has enough overlapped
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_1
3GPP Name
None
3GPP Reference
None
5-174
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates whether the intra-cell TCH handover due to upDescription
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
of the cell.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_2
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow intra-cell handover attempt
Description
Managed Object
Cell
5-175
SJ-20100524164252-017|2011-07-28 (R1.4)
1: 1: : Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
enabled by default.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_3
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow handover due to distance.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
5-176
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_4
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow standard PBGT handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
default.
5-177
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_5
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow automatic handover based
Description
on traffic.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
The cell traffic is not too high in the common network, so this handover
Configuration Reason
is not enabled.
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5.3.4.6 Allow intra-cell handover in super TRX channel due to downlink interference
(HoControl_8)
Allow intra-cell handover in super TRX channel due to downlink interferFull Name
ence
Abbreviation
HoControl_8
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow intra-cell handover in super
TRX channel due to downlink interference.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
5-179
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5.3.4.7 Allow intra-cell handover in super TRX channel due to uplink interference
(HoControl_9)
Full Name
Abbreviation
HoControl_9
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow intra-cell handover in super
TRX channel due to uplink interference.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
5-180
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5.3.4.8 Allow adjacent cells handover in super TRX channel due to PBGT
(HoControl_10)
Full Name
Abbreviation
HoControl_10
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow adjacent cells handover in
super TRX channel due to PBGT.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
5-181
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_11
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow dynamic adjustment of
handover priority.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
5-182
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_12
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to allow uplink level rapid handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-183
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_13
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow Macro-Micro delay
handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-184
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_14
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow Micro-Micro delay handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
5-185
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_16
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow forced transfer handover.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
0
5-186
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_19
3GPP Name
None
3GPP Reference
None
This parameter describes whether quality handover in uplink is allowed.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-187
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_20
3GPP Name
None
3GPP Reference
None
This parameter describes whether level handover in uplink is allowed.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
The Uplink level handover is the most common handover, so the default
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_21
3GPP Name
None
3GPP Reference
None
This parameter describes whether quality handover in downlink is
allowed.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-189
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoControl_22
3GPP Name
None
3GPP Reference
None
This parameter describes whether level handover in downlink is allowed.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5-190
SJ-20100524164252-017|2011-07-28 (R1.4)
5.3.4.18 The priority of the handover from Macro cell to Micro cell (MacroMicroPrio)
Full Name
Abbreviation
MacroMicroPrio
3GPP Name
None
3GPP Reference
None
This parameter describes whether the macro-micro handover decision
takes priority over the PBGT handover decision.
If the switch is enabled, the macro-micro handover takes priority;
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Otherwise, it is disabled.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5-191
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_24
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the handover function of C/I limited
adjacent cell is supported.Suppose A is the serving cell, B and C are the
adjacent cells of this serving cell. If B and C both meet the handover
prerequisite, and the C/I limited adjacent cell threshold is satisfied,
the cell C should be filtered when the neighbor cell is chosen for the
handover.
It is the 24th bit of the HoControl field in DWORD type.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-192
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoControl_25
3GPP Name
None
3GPP Reference
None
Call drop occurs due to downlink quality becomes poor after call is
connected a short while or MS is handed over to cells with strong
interference areas.In this case, downlink quality rapid handover
algorithm is newly added to perform rescue handover. The quality rapid
handover depends on the original measurement value of quality, the
adjacent cell does not use windows, and N value and the N value of
handover decison are shared. Currently, other handover decisons take
priority over the downlink quality rapid handover.
This parameter indicates whether to perform downlink quality rapid
handover.
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
The default value is only enabled for the cell of poor downlink quality,
Configuration Reason
Generally, This switch is enabled only when downlink quality is poor and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-193
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FrToAmrHrHoLoadThr
3GPP Name
None
3GPP Reference
None
When the cell load reaches a certain level, handover from FR to HR (V3)
should be initiated, so as to get more channel resources and enhance
system capacity. This parameter determines the load threshold for
initiating handover from FR to HR (V3).
The value of this parameter should be smaller than or equal to the value
of FrHoLoadThr.
The load calculation formula is as follows: Load = Number of busy
channels in the cell x 100 / (Number of busy channels in the cell +
Description
Managed Object
Cell
20..100
Unit
Default Value
80
Default Value
Configuration Reason
When the cell load reaches 80%, the cell is regarded as a busy cell. In
this case, handover from FR to HR (V3) can be performed to enhance
system capacity.
This parameter is valid when the FRTHRHOSupport switch is enabled
in the cell.
The larger the value of this parameter, the higher the cell load for
Adjustment Suggestion
opportunity.
The smaller the value of this parameter, the lower the cell load for
initiating handover from FR to HR (V3), and therefore the higher the
opportunity.
5-194
SJ-20100524164252-017|2011-07-28 (R1.4)
Offline
Related features
Related Parameters
[Cell]FRTHRHOSupport
[Cell]FrToHrHoLoadThr
This parameter is valid only when the FRTHRHOSupport switch is
Relationship
enabled.
FrToHrHoLoadThr >= FrToAmrHrHoLoadThr
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
FrToHrHoLoadThr
3GPP Name
None
3GPP Reference
None
When the cell load reaches a certain level, handover from FR to HR (V1)
should be initiated, so as to get more channel resources and enhance
system capacity. This parameter determines the load threshold for
initiating handover from FR to HR (V1).
This parameter value should be larger than or equal to
FrToAmrHrHoLoadThr.
The load calculation formula is as follows: Load = Number of busy
channels in the cell x 100 / (Number of busy channels in the cell +
Description
Managed Object
Cell
20..100
5-195
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
90
Default Value
Configuration Reason
When the cell load reaches 80%, the cell is regarded as a busy cell. In
this case, handover from FR to HR (V1) can be performed to enhance
system capacity.
This parameter is valid when the FRTHRHOSupport switch is enabled
in the cell.
The larger the value of this parameter, the higher the cell load for
Adjustment Suggestion
opportunity.
The smaller the value of this parameter, the lower the cell load for
initiating handover from FR to HR (V1), and therefore the higher the
opportunity.
Change Mode
Offline
Related features
Related Parameters
[Cell]FRTHRHOSupport
[Cell]FrToAmrHrHoLoadThr
This parameter is valid only when the FRTHRHOSupport switch is
Relationship
enabled.
FrToHrHoLoadThr>=FrToAmrHrHoLoadThr
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
FrHoQuaThr
3GPP Name
None
3GPP Reference
None
5-196
SJ-20100524164252-017|2011-07-28 (R1.4)
or AmrHrHoQuaThr.
Managed Object
Cell
0..69
Unit
None
Default Value
10
Default Value
Configuration Reason
The voice quality must meet a certain requirement after handover from
FR to HR. Therefore, this parameter can be configured to a relatively
small value.
Change Mode
Offline
Related features
Related Parameters
[Cell]FRTHRHOSupport
[Cell]AmrHrHoQuaThr
[Cell]HrHoQuaThr
This parameter is valid only when the FRTHRHOSupport switch is
Relationship
enabled.
HrHoQuaThr>FrHoQuaThr
AmrHrHoQuaThr>FrHoQuaThr
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
5-197
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HrHoQuaThr
3GPP Name
None
3GPP Reference
None
Although an HR call does not meet handover conditions, the intra-cell
handover from HR (V1) to FR can be initiated to improve voice quality
if the voice quality is too bad. This parameter determines the quality
threshold for initiating the intra-cell handover from HR (V1) to FR.
Description
Managed Object
Cell
8..70
Unit
None
Default Value
39
Default Value
Configuration Reason
Adjustment Suggestion
The smaller the value of HrHoQuaThr, the lower the tolerance on the
BER of the HR service, and therefore the higher the possibility of
initiating quality handover from HR (V1) to FR.
Change Mode
Offline
Related features
Related Parameters
[Cell]HRTFRHOSupport
[Cell]FrHoQuaThr
This parameter is valid only when the HRTFRHOSupport switch is
Relationship
enabled.
HrHoQuaThr >= FrHoQuaThr
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
5-198
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
AmrHrHoQuaThr
3GPP Name
None
3GPP Reference
None
Although an AMR HR call does not meet handover conditions, the
intra-cell handover from HR (V3) to FR can be initiated to improve voice
quality if the voice quality is too bad. This parameter determines the
quality threshold for initiating the intra-cell handover from HR (V3) to FR.
Description
Managed Object
Cell
8..70
Unit
None
Default Value
39
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]HRTFRHOSupport
[Cell]FrHoQuaThr
This parameter is valid only when the HRTFRHOSupport switch is
Relationship
enabled.
AmrHrHoQuaThr>FrHoQuaThr
Related Interfaces
None
Impact on Equipment
0
5-199
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
LoadAndQualHoP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
For the handovers between FR and HR caused by load and quality
changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
This parameter value should be smaller than or equal to
Description
LoadAndQualHoN.
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]FRThrHoSupport,
[Cell]LoadAndQualHoN
5-200
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter takes effect until the FR->HR switch based on load is
Relationship
enabled.
This parameter value should be smaller than or equal to
LoadAndQualHoN.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadAndQualHoN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
For the handovers between FR and HR caused by load and quality
changes, if P out of the N values (the latest average N values of signal
quality) satisfy the threshold requirements, handover can be initiated.
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
If the value is set too large, it takes a long time to make handover
decisions and call drop occurs easily caused by handover delays.
5-201
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
[Cell]FRThrHoSupport,
[Cell]LoadAndQualHoP
This parameter takes effect until the FR->HR switch based on load is
Relationship
enabled.
This parameter value should be larger than or equal to LoadAndQualHoP.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoFailPenalTime
3GPP Name
Internal
3GPP Reference
None
This parameter defines the penalty time for destination cell if MS fails
to handover to the destination cell or channel allocation fails during handover. During the penalty time, this parameter is used to perform an offset
Description
Managed Object
Cell
1..255
Step: 1
Unit
Default Value
5-202
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
DynPrioOffset
3GPP Name
None
3GPP Reference
None
This parameter indicates the tolerable difference of dynamic handover
priority.
During handover, if the first cells dynamic handover priority is higher than
that of the second cell but the second cell is in MS moving direction, then
the direction-based handover algorithm works if the difference between
the two cells handover priorities is within the tolerable difference. MS is
Description
Managed Object
Cell
1..7
Step: 1
5-203
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
This parameter is to handover the adjacent cell priority. The smaller the
value is, it is easier for the cell with good quality signal to take priority. It
is proper to set the default value as 1.
This parameter affects the priority of the candidate cell. The larger this
parameter is, the greater the priority difference between to dynamic cells
should be, so as to change the priority of two cells.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
PBGT difference
Abbreviation
PbgtOffset
3GPP Name
None
3GPP Reference
None
This parameter defines a tolerable PBGT difference.During handover, if
the first cells PBGT is higher than that of the second cell but the second
cell is in MS moving direction, then the direction-based handover algorithm works if the difference between the two cells PBGTs is within the
tolerable difference. MS is handover to the second cell. This parameter
Description
5-204
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..20
Step: 1
Unit
dB
Default Value
Default Value
Configuration Reason
This parameter is to handover the adjacent cell priority. The smaller the
value is, it is easier for the cell with good quality signal to take priority. It
is proper to set the default value as 3.
This parameter affects the priority of the candidate cell. The larger this
parameter is, the greater the power budget difference between two cells
should be, so as to change the priority of two cells.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrafficHoLayerCtl
3GPP Name
Internal
3GPP Reference
None
5-205
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0.. 3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
5-206
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
TrafficHoFreqCtl
3GPP Name
Internal
3GPP Reference
None
This parameter defines the control value of frequency band for traffic
handover, i.e. which frequency band shall be handover to.
Basic GSM900 frequency band P-GSM (ARFCN = 1..124)
Extended GSM900 frequency band E-GSM (ARFCN = 0..124,
975..1023)
DCS1800 frequency band DCS1800 (ARFCN = 512..885)
PCS1900 frequency band PCS1900 (ARFCN = 512..810)
Description
Managed Object
Cell
Unit
None
Default Value
GSM900
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-207
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrafficThs
3GPP Name
Internal
3GPP Reference
None
If TCH occupation rate of a cell is greater than this parameter value (number of occupied TCH channels / number of total TCH channels, not including blocked idle channels), then it indicates the cell is too busy, and traffic
Description
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
80
Default Value
It is proper to initiate congestion control when the cell load reaches 80%
Configuration Reason
For the cell with fewer channels, channel congestion occurs easily
caused by the burst services, so this parameter can be set as relatively
small.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-208
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PbgtHoParam_0
3GPP Name
None
3GPP Reference
None
To more effectively control traffic distribution in the cell at different layers,
while doing PBGT decision, add PBGT decision offset level (the PBGT
decision offset level of the uplink and downlink is 24 by default) in the
cell at different layers within certain duration, which is lag time for PBGT
between different layers.
Start condition: If MS performs one handover between different layers,
start this timer.
Timeout handling: When it is notified to make handover decision, if the
Description
Managed Object
Cell
0..300
Step: 1
Unit
Default Value
50
Default Value
Configuration Reason
The value will be modified to the default value (50 s) if it is 0.If the
lag time is not timed out, it is necessary to add offset to the PBGT
cross-layer handover.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-209
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PbgtHoParam_1
3GPP Name
None
3GPP Reference
None
To more effectively control traffic distribution in the cell at different layers,
while doing PBGT decision, add PBGT decision offset level in the cell at
upper layer within certain duration which is dependent upon the lag time
Description
Managed Object
Cell
0 .. 48corresponds to -24 dbm..24 dbm
Step: 1
Unit
None
Default Value
24
Default Value
Configuration Reason
5-210
SJ-20100524164252-017|2011-07-28 (R1.4)
The large value is useful for traffic balance and congestion alleviation.
Whereas, it makes PBGT handover to the upper layer difficult and
influences the converage rate.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PbgtHoParam_2
3GPP Name
None
3GPP Reference
None
To more effectively control traffic distribution in the cell at different layers,
while doing PBGT decision, add PBGT decision offset level in the cell at
lower layer within certain duration which is dependent upon the lag time
Description
Managed Object
Cell
0 .. 48corresponds to -24 dbm..24 dbm
Step: 1
Unit
None
Default Value
24
Default Value
Configuration Reason
5-211
SJ-20100524164252-017|2011-07-28 (R1.4)
The value 0..48 represents -24 db + 24 db. Its effect is the same as
that of PBGT Margin. That is, a lag value between different layers is
added on the basis of PBGT Margin, so as to make PBGT handover
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PbgtHoStartThs
3GPP Name
None
3GPP Reference
None
When the current cell's downlink level is less than the start level threshold
Description
Managed Object
Cell
Step: 1
Unit
dbm
5-212
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
45
Default Value
Configuration Reason
influenced.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroStartThs
3GPP Name
None
3GPP Reference
None
5-213
SJ-20100524164252-017|2011-07-28 (R1.4)
When the current cell's downlink level is less than or equal to the start level
threshold for macro-micro handover, the macro-micro handover decision
Description
is performed.
Managed Object
Cell
0 .. 63corresponds to -110 dbm..-47 dbm
Step: 1
Unit
dbm
Default Value
40
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrafficHysteresisTm
5-214
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
When there are many traffic handovers initiated in the current cell, the
interval between two traffic handovers must be larger than the hysteresis
Description
Managed Object
Cell
0 .. 255
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
TrafficLevThs
5-215
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter is used for traffic handover. For the original handover
condition that adjacent cells level must be higher than that of this cell,
modify it so that adjacent cells level must be higher than this threshold.In
this way, traffic handover can be improved greatly. This threshold must
be less than the PBGT threshold in reverse direction. Otherwise, it may
Description
Managed Object
Cell
0 .. 48
Step: 1
Unit
None
Default Value
24
Default Value
Traffic handover is to balance the traffic, which depends upon the level
Configuration Reason
of the destination cell not less than that of the serving cell.
This parameter is valid after automatic handover based on traffic
(HoControl6) is allowed.Note that the threshold of PBGT handover
in the reverse direction of the destination cell needs to be raised for
compensation.
Under the dense traffic scenario, the smaller this parameter is, the
stronger the capability of absorbing traffic of the destination Nclayer
cell or frequency band cell is, the easier the traffic can be handed out
(the traffic threshold shall be reached), which helps alleviate the TCH
channel congestion of the cell.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-216
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
PenaltyLevOffset
3GPP Name
None
3GPP Reference
None
This parameter is used to perform an offset on the downlink level of this
Description
Managed Object
Cell
0 .. 63
Step: 1
Unit
dB
Default Value
15
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-217
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
QOffSetUl
3GPP Name
None
3GPP Reference
None
When handover occurs in the cell, BSC judges whether interference
occurs to the channel through checking the relation between level and
quality.
Handover requirements are satisfied, when P times in N
times measurement of IntraHoUlLevN satisfies the formula
rxqual-ulFQSS(RXLEV_UL+SOffSetUl). Where, rxqual-ul is uplink
quality, QOffSetUL is uplink quality offset, AvRxlevUL(n) is uplink level,
SOffSetUL is uplink level offset, and FQSS is the current quality offset
confirmed by the level and corresponding level offset"SOffSetUl". The
specific algorithm is:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After interference is confirmed, when channels are requested, with
status of the original channel occupied, from the database to process
services, the database selects proper channels based on the original
Description
channel status.
Managed Object
Cell
0..2
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
interference environment.
The larger the value is, the higher the quality tolerability under the
corresponding level is, and it is more difficult to initiate quality handover
which should be adjusted in accordance with the actual network situation.
5-218
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
SOffSetUl
3GPP Name
None
3GPP Reference
None
When handover occurs in the cell, BSC judges whether interference
occurs to the channel through checking the relation between level and
quality.
Handover requirements are satisfied, when P times in N
times measurement of IntraHoUlLevN satisfies the formula
rxqual-ulFQSS(RXLEV_UL+SOffSetUl). Where, rxqual-ul is uplink
quality, QOffSetUL is uplink quality offset, AvRxlevUL(n) is uplink level,
SOffSetUL is uplink level offset, and FQSS is the current quality offset
confirmed by the level and corresponding level offset"SOffSetUl". The
specific algorithm is:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
Description
5-219
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..20
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
interference environment.
The larger the value is, the higher the requirement on quality handover
is, and it is more difficult to initiate quality handover which should be
adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
QOffSetDl
3GPP Name
None
3GPP Reference
None
5-220
SJ-20100524164252-017|2011-07-28 (R1.4)
channel status.
Managed Object
Cell
0..2
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
interference environment.
The larger the value is, the higher the quality tolerability under the
corresponding level is, and it is more difficult to initiate quality handover
which should be adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-221
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SOffSetDl
3GPP Name
None
3GPP Reference
None
When handover occurs in the cell, BSC judges whether interference
occurs to the channel through checking the relation between level and
quality.
Handover requirements are satisfied, when P times in N
times measurement of IntraHoUlLevN satisfies the formula
rxqual-ulFQSS(RXLEV_UL+SOffSetUl). Where, rxqual-dl is downlink
quality, QOffSetDL is uplink quality offset, XLEV_DL is downlink level,
SOffSetDL is downlink level offset, and FQSS is the current quality offset
confirmed by the level and corresponding level offset"SOffSetDl". The
specific algorithm is:
255 AvRxlevUL(n) < SOffSetUL + 20
InterFQSS= | QOffSetUl + 2 SOffSetUL + 20 AvRxlevUL(n) <
SOffSetUL + 30
| QOffSetUl + 3 SOffSetUL + 30 AvRxlevUL(n) < SOffSetUL + 40
QOffSetUl + 4 SOffSetUL + 40 AvRxlevUL(n)
After interference is confirmed, when channels are requested, with
status of the original channel occupied, from the database to process
services, the database selects proper channels based on the original
Description
channel status.
Managed Object
Cell
0..20
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
interference environment.
5-222
SJ-20100524164252-017|2011-07-28 (R1.4)
The larger the value is, the higher the requirement on quality handover
is, and it is more difficult to initiate quality handover which should be
adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TMaxiHo
3GPP Name
None
3GPP Reference
None
If MS performs handover continuously in the cell, it indicates great
interference in this position and no appropriate channel is available.
In such a case, MS shall be forbidden to perform handover within a
certain time. The judgment method is as follows: If handover occurs
within the invalid intra-handover time, then the previous handover is
considered to have no influence on interference, the counter HoCount
increases by 1 and restart TMaxIHo. If handover occurs after the invalid
intra-handover time, the previous handover is considered valid and clear
the counter to 0.
If the counter value reaches the value of MAX count of invalid
intra-handover parameter, then it indicates not to attempt handover
Description
5-223
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..255
Step: 1
Unit
Default Value
16
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxiHo
3GPP Name
None
3GPP Reference
None
5-224
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-225
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MaxLossThs
3GPP Name
None
3GPP Reference
None
Directed handover is performed only for one designated cell and it is
restricted by a tolerable level difference MaxLevDiff. This level difference
is lower than PBGT handover threshold in reverse direction, thus to
avoid toggle handover.
Directed handover should not cause congestion in the destination cell.
Therefore, transfer reserved resource threshold is set. Perform forced
transfer when the destination cell resource is less than the threshold.
Select users with small path loss and small TA as transferred users.
Users are transferred when their path loss is less than this parameter
and TA is less than the MAX time advance threshold on force handover
parameter. This algorithm applies to cases such as dual-frequency
networking, 900 M cell and 1800 M cell share the same site address.
When MAX time advance threshold on force handover (MaxTAThs) is
63, the forced handover decision is made only according to the path
loss. When MAX path loss threshold on force handover (MaxLossThs) is
150, the forced handover decision is made only according to TA.
The N value of force handover parameter and P value of force handover
parameter are used for decision in actual situations. In other words,
handover conditions are met if HoForceP of HoForceN measurement
reports satisfy requirement.
Path loss L = BS_TXPWR - AV_RXLEV_DL
BS_TXPWR is transmission power of the carrier where occupied
timeslot locates. It depends on the carriers maximum transmission
power, static attenuation power, and power control.AV_RXLEV_DL is
the downlink-receiving level.
Therefore, forced handover shall meet the following requirements:
Level of destination cell must be higher than local cell by maximum level
difference;
Available resource of destination cell must be higher than transfer
reserved resource threshold;
Path loss L must be less than MAX path loss threshold on force
handover and TA must be less than MAX time advance threshold on
force handover;
Description
Managed Object
Cell
0..150
Step: 1
5-226
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
110
The forced transfer judgement is made on many conditions, so the
Default Value
allowed maximum path loss should not be too small, but it also should
Configuration Reason
not be too large. If the value is set as the maximum value, this parameter
is invalid. It is proper to set the value as 110.
Forced handover shall meet the following requirements: Level of the
destination cell must be higher than that of the local cell by MaxLevDiff;
available resource of the destination cell must be higher than the
Adjustment Suggestion
loss L must be less than MaxLossThs and the TA must be less than
MaxTAThs. The higher the path loss is, the poorer the signal intensity
of the destination cell is, thereby the max path loss threshold cannot
be too large.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
MaxTAThs
3GPP Name
None
3GPP Reference
None
5-227
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-228
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForceN
3GPP Name
None
3GPP Reference
None
5-229
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-230
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForceP
3GPP Name
None
3GPP Reference
None
Directed handover is performed only for one designated cell and it is
restricted by a tolerable level difference MaxLevDiff. This level difference
is lower than PBGT handover threshold in reverse direction, thus to
avoid toggle handover.
Directed handover should not cause congestion in the destination cell.
Therefore, transfer reserved resource threshold is set. Perform forced
transfer when the destination cell resource is less than the threshold.
Select users with small path loss and small TA as transferred users.
Users are transferred when their path loss is less than this parameter
and TA is less than the MAX time advance threshold on force handover
parameter. This algorithm applies to cases such as dual-frequency
Description
networking, 900 M cell and 1800 M cell share the same site address.
5-231
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-232
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DuleBandOffset
3GPP Name
None
3GPP Reference
None
This parameter indicates the value to compensate power in the second
cell in dual band cell. It is used to calculate the PBGT value of adjacent
cell.If the structure of current cell is the subcell structure and MS is in
the second subcell, use the PBGT value (calculated by the formula) of
adjacent cell minus DuleBandOffset. That is, the PBGT value is reduced,
Description
Managed Object
Cell
0..50 step: 1
Unit
dB
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
handover in subcell 2.
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
Um
5-233
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PathLossMax
3GPP Name
None
3GPP Reference
None
This parameter is one of the subcell handover parameters. It is the maximum path loss.During assignment, if byPathLoss PathLossMin and TA
SubCellTAMin, the second subcell channel will be selected first. If byPathLossPathLossMin or TASubCellTAMin, only the first subcell channel is available.During handover, when the current call is in subcell 1, if
value TA is smaller than the SubCellTAMin threshold set by the cell parameter and the path loss calculated by downlink level is smaller than
the PathLossMin threshold set by the cell parameter(That is, more than
SubCellP in SubCellN satisfy byPathLoss PathLossMin and TA SubCellTAMin), and MS supports the frequency band of subcell 2, the handover
condition of subcell is met and handover is performed from subcell 1 to
subcell 2. When the current call is in the subcell 2, if the pass loss of subcellN and more than subcellP in value TA satisfy PathLossPathLossMax
or TASubCellTAMax, the conditions of pass loss and TA handover are
Description
Managed Object
Cell
0..150 step: 1
Unit
dB
Default Value
126
Default Value
Configuration Reason
5-234
SJ-20100524164252-017|2011-07-28 (R1.4)
The larger the value is, it is more difficult to initiate handover from subcell
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PathLossMin
3GPP Name
None
3GPP Reference
None
This parameter is one of the subcell handover parameters. It is the mini-
Description
Managed Object
Cell
0..150 step: 1
Unit
dB
Default Value
120
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
SubCellTAMax
3GPP Name
None
3GPP Reference
None
This parameter is one of the subcell handover parameters. It is the max-
Description
Managed Object
Cell
0..63 step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The larger the value is, it is more difficult for TA to initiate handover from
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
5-236
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SubCellTAMin
3GPP Name
None
3GPP Reference
None
This parameter is one of the subcell handover parameters. It is the mini-
Description
Managed Object
Cell
0..63 step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
5-237
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SubCellN
3GPP Name
None
3GPP Reference
None
This parameter is one of the conditions used to decide inter-subcell han-
Description
Managed Object
Cell
1..10 step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-238
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SubCellP
3GPP Name
None
3GPP Reference
None
This parameter is one of the conditions used to decide inter-subcell han-
Description
Managed Object
Cell
1..10 step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_17
3GPP Name
None
3GPP Reference
None
This parameter defines two handover modes of subcell handover algo-
Description
rithm: One is based on C/I, and the other is based on path loss and TA.
Managed Object
Cell
The value range and step is based on C/I handover, path loss and TA
handover.
Unit
None
Default Value
Default Value
Configuration Reason
algorithm based on path loss and TA. Currently, the on-site enabled
Adjustment Suggestion
Change Mode
Offline
ZGO-04-02-005 Co-BCCH & ZGO-05-02-009 Concentric Circle Technol-
Related features
ogy
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-240
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoToInnerSC
3GPP Name
None
3GPP Reference
None
This parameter indicates whether it is allowed to perform handover from
other sites (including the sites of external BSC) to the subcell 2 of this
Description
cell.
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-04-02-005 Co-BCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-241
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
QUALITYAVERAGEWEIGHT
3GPP Name
Internal
3GPP Reference
None
The quality weight of measurement report is represented by 20
parameters. The average uplink quality and average downlink
quality use this group of parameters. The first parameter indicates
the weight of the latest measurement report.For example, if quality
weight is 100, 80, 60, or 40, and the quality average window size is 4,
QAVG=(Q1*100+Q2*80+Q3*60+Q4*40)/(100+80+60+40) (Q1 is the
Description
Managed Object
Cell
1..100
Step: 1
Unit
None
Default Value
100
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-242
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LEVELAVERAGEWEIGHT
3GPP Name
None
3GPP Reference
None
This parameter describes the level weight of the latest Nth measurement
Description
value.
Managed Object
Cell
1..100
Step: 1
Unit
None
Default Value
100
Default Value
Configuration Reason
This parameter is newly added in the 61 version. All levels keep the
same weight by default so that the handover index does not fluctuate
before and after upgrade.
Adjustment Suggestion
to the highest.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
5-243
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Site
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
5-244
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->SDCCH Handover
Modifying
Version
Parameter
Control->Handover Pretreatment
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
5-245
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->SDCCH Handover
Modifying
Version
Parameter
Control->Handover Pretreatment
None
Modifying
Detail
None
Abbreviation
SDCCHHocId
3GPP Name
None
3GPP Reference
None
This parameter means the ID of SDCCH handover control. It cannot be mod-
Description
ified.
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
5-246
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->SDCCH Handover
Modifying
Version
Parameter
Control->Handover Pretreatment
None
Modifying
Detail
None
Abbreviation
ZeroAllowed
3GPP Name
None
3GPP Reference
None
SDCCHallows zero number of measurement reports.
According to GSM specifications, MS can report to BSS the
measurement data of at most six adjacent cells with strongest signal
strength. Thus the measurement results recorded by BSC might not be
consecutive. For cells whose signal strength is less than -110 dBm, the
measurement data are not reported. BSC marks measurement data of
such adjacent cells as 0.
This parameter gives flexibility for 0 occurrences in measurement data
averaging. However, excessive occurrences of 0 indicate that the
adjacent cells are of poor signal strength.
The ZeroAllowed value in average value calculation indicates the
allowed number of 0 in a average value calculation.
To be specific, during averaging, if the count of 0s in the sampling count
exceeds ZeroAllowed, these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
exceed ZeroAllowed, these sampling values are much reliable and the
measurement average will be the sum of the reported values divided by
Description
5-247
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..20
Step: 1
Unit
None
Default Value
Default Value
Usually with general window value and N value, one null value can be
Configuration Reason
accepted.
The counterpart has more endurance of unsteadiness during
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevWindow
3GPP Name
None
3GPP Reference
None
5-248
SJ-20100524164252-017|2011-07-28 (R1.4)
in average calculation.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
small.
Average window value:
Big window value requires more measurement reports for the first
average calculation. The impact of signal fluctuation can be avoided, but
the handover will be delayed. Therefore the handover success ratio, call
drop ratio and the coverage ratio will be affected.
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
drop ratio and the coverage ratio will be affected.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-249
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevWindow
3GPP Name
None
3GPP Reference
None
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
The parameter HoDlLevWindow represents the window size (i.e. the
number of sample values) used to calculate the average value of
downlink signal intensity.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
the incorrect measured value. But if the value is too high, the decision
Adjustment Suggestion
will not be made in time. Possibly there will not be enough time for
The parameter value can be set high to get rid of the impact caused by
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-250
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Uplink quality
Abbreviation
HoUlQualWindow
3GPP Name
None
3GPP Reference
None
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
The parameter of handover uplink quality average window
HoDlQualWindow is the size of the window used to calculate the average
value of uplink signal quality. This size is the number of samples used in
Description
averaging.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
small.
5-251
SJ-20100524164252-017|2011-07-28 (R1.4)
the handover will be delayed. Therefore the handover success ratio, call
drop ratio and the coverage ratio will be affected.
Big window value requires few measurement reports for the first average
calculation. The hadover decision will be made quickly, which will cause
wrong or frequent handover. Therefore, the handover success ratio, call
drop ratio and the coverage ratio will be affected.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualWindow
3GPP Name
None
3GPP Reference
None
5-252
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
the incorrect measured value. But if the value is too high, the decision
Adjustment Suggestion
will not be made in time. Possibly there will not be enough time for
measurement because data transmission on SDCCH will not last long.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-253
SJ-20100524164252-017|2011-07-28 (R1.4)
Distance
Abbreviation
DistanceWindow
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
The parameter of sampling count of distance DistanceWindow is the size
of the window used to calculate the average value of the distance from
MS to BTS (actually the Time Advance, TA). This size is the number of
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
If there are few sampling for handover decision, wrong decision might
Adjustment Suggestion
be made.
Change Mode
Offline
Related features
Related Parameters
[BSC]ShoEnable
Relationship
This parameter takes effect when the system support SDCCH handover.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-254
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Neighboring cell
Abbreviation
NCellWindow
3GPP Name
None
3GPP Reference
None
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of the suddenly
changed measurement values resulting from complicated radio
transmission, BSC, when making handover decision, no longer uses the
original measurement data but uses a series of average values of the
measurement data.
The parameter of adjacent cell average window NCellWindow is the
size of the window used to calculate the average value of adjacent cell
signal strength. This size is the number of samples used in the average
Description
calculation.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
small.
Average window size:
Big window size requires more measurement reports for the first average
calculation. The impact of signal fluctuation can be avoided, but the
Change Mode
Offline
Related features
None
5-255
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
NcellWindowEmerg
3GPP Name
None
3GPP Reference
None
In the GSM system, BSC makes SDCCH handover decision according
to the measurement data. To avoid the negative impact of burst
measurement values resulting from complicated radio transmission,
BSC, when making handover decision, no longer uses the original
measurement data but uses a series of average values of the
measurement data.
The average value window of neighbor cells for emergency handover is
the number of samples used in the calculation.
The emergency handover include uplink and downlink quality handover,
uplink and downlink level handover, uplink quick fading handover,
sub-cell homocentric circularity handover (handover caused by path loss
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
5-256
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Usually this parameter is set 2. The average value for a neighbor cell
should not be too large because an emergency handover needs to
reflect the measured data in a very short time recently.
Changing the parameter value can impact the sensitivity of the target
cell selection by handover decision. The neighbor cell is not likely to be
chosen as the target cell if the parameter value is big.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
None
3GPP Reference
None
5-257
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Threshold: 0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
N value: 1..20;
P value: 1..20
Step: 1
Unit
None
Default Value
[15, 3, 2]
Default Value
Configuration Reason
Adjustment Suggestion
raised.
If the parameter is set too high, handovers will happen frequently and
the handover success ratio will be lowered.
If the N/P is set high, more average calculation will be conducted in
the measurement process. The arbitration for the handover caused by
uplink level will be conducted slowly, thus the call quality and signal
coverage will be impacted, which will result in call drops.
5-258
SJ-20100524164252-017|2011-07-28 (R1.4)
If the N/P is set low, less average calculation will be conducted in the
measurement process. The arbitration for the handover caused by
uplink level will be conducted quickly, thus the call quality and signal
coverage will be impacted, which will result in call drops.
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevN
3GPP Name
None
3GPP Reference
None
According to GSM specifications, SDCCH handover decisions depend
on the received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
downlink signal strength, if P of the N values fall below relevant threshold
value, perform handover to improve the downlink signal strength.
The parameter HoDlLevThs defines the related threshold. The
parameter HoDlLevN defines the related N value. The parameter
HoDlLevP defines the related P value.
Usually the value of HoDlLevThs should be less than the threshold for
Description
downlink power control (increase). That is, perform power control first. If
5-259
SJ-20100524164252-017|2011-07-28 (R1.4)
power control does not work, perform handover. This parameter can be
set 15 (-96 dBm .. -95 dBm) as the default value.
V6.20.614b and later versions will support this parameter.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlLevP
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevP
3GPP Name
None
3GPP Reference
None
5-260
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
quick handover.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlLevN
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-261
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoDlLevThs
3GPP Name
None
3GPP Reference
None
According to GSM specifications, SDCCH handover decisions depend
on the received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
downlink signal strength, if P of the N values fall below relevant threshold
value, perform handover to improve the downlink signal strength.
The parameter HoDlLevThs defines the related threshold. The
parameter HoDlLevN defines the related N value. The parameter
HoDlLevP defines the related P value.
Usually the value of HoDlLevThs should be less than the threshold for
downlink power control (increase). That is, perform power control first. If
power control does not work, perform handover. This parameter can be
set 15 (-96 dBm .. -95 dBm) as the default value.
Description
Managed Object
Cell
0..63
0: < -110 dBm;
1: (-110 .. -109)dBm;
...
62: (-49 .. -48) dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]PcDlInclLevThs
Relationship
Related Interfaces
None
5-262
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
3GPP Name
None
3GPP Reference
None
According to GSM specifications, arbitration for SDCCH can be
conducted after a series of average values of uplink and downlink signal
strength are obtained. The arbitration process is as follows: for the
latest N average values of uplink signal strength, if P of the N values
are higher than the threshold value, perform handover to improve the
uplink signal quality.
The parameter HoDlQualThs defines the related threshold. The
parameter HoDlQualN defines the related N value. The parameter
HoDlQualP defines the related P value.
Usually the value of HoUlQualThs should be higher than the threshold
that causes the uplink power control (increase). That is, perform power
Description
Managed Object
Cell
Threshold: 0..70;
N value: 1..20;
P value: 1..20
Step: 1
Unit
None
Default Value
[49, 3, 2]
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
If the parameter value is set too low, the call quality and coverage will be
Adjustment Suggestion
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualN
3GPP Name
None
3GPP Reference
None
5-264
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
quick handover.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlQualP
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-265
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoDlQualP
3GPP Name
None
3GPP Reference
None
According to GSM specifications, SDCCH handover decisions depend
on the received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
downlink signal strength, if P of the N values fall below relevant threshold
value, perform handover to improve the downlink signal quality.
The parameter HoDlQualThs defines the related threshold. The
parameter HoDlQualN defines the related N value. The parameter
HoDlQualP defines the related P value.
Usually the value of HoDlQualThs should be higher than the threshold
(PcDlInclQualThs)for downlink power control (increase). That is, perform
power control first. If power control does not work, perform handover.
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
quick handover.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoDlQualN
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-266
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualThs
3GPP Name
None
3GPP Reference
None
According to GSM specifications, SDCCH handover decisions depend
on the received average value of uplink and downlink signal strength.
The decision process is as follows: For the latest N average values of
downlink signal strength, if P of the N values fall below relevant threshold
value, perform handover to improve the downlink signal quality.
The parameter HoDlQualThs defines the related threshold. The
parameter HoDlQualN defines the related N value. The parameter
HoDlQualP defines the related P value.
Usually the value of HoDlQualThs should be higher than the threshold
(PcDlInclQualThs)for downlink power control (increase). That is, perform
power control first. If power control does not work, perform handover.
Description
Managed Object
Cell
0..70
Step: 1
Unit
None
Default Value
49
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
5-267
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]PcDlInclQualThs
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RapidHoThs / RapidHoN
3GPP Name
None
3GPP Reference
None
During fast fading handover, some parameters should be used. During
an SDCCH handover, if the measured uplink signal intensity of a call is
less than rapid handover threshold continuously, it triggers handover of
existing cell to most probable candidate cell.
RapidHoN counter defines the minimum times for which the measured
signal intensity of a call is less than the threshold.
RapidHoThs may be set as 15 (that is, -96 dBm .. -95 dBm) by default,
the same as the level threshold of ordinary handover. The parameter
RapidHoN should be set to ensure that rapid handover is faster than
Description
Managed Object
Cell
Threshold: 0..62;
N value: 1..20
Step: 1
Unit
None
Default Value
[10, 2]
5-268
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The level threshold for the uplink quick fading handover is set low. N
Configuration Reason
larger than downlink level handover threshold, and the decision N value
is smaller the N value for level decision.
It is recommended to use the default values.
Under the situations of fast moving and weak coverage, call drop ratio
can be lowerd.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DistanceN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
5-269
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 3.
If the value is set low, there will few samplings and wrong arbitration
might be made.
Adjustment Suggestion
If the value is set high, arbitration for handover needs more time and
call drop will happen.
Change Mode
Offline
Related features
Related Parameters
[BSC]ShoEnable
[Cell]DistanceP
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-270
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
DistanceP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to GSM specifications, arbitration for SDCCH can be
conducted after a series of average values of uplink and downlink signal
strength are obtained.
The distance between MS and BTS can impact the handover. The
arbitration process is as follows: For the latest N average values of TA
(distance), if P of the N values are higher than the relevant threshold
value, perform a handover. The handover happens due to MS being out
of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 2.
If the value is set low, it will be easy to meet the arbitration conditions
Adjustment Suggestion
If the value is set high, it will be difficult to meet the arbitration conditions
and handover will not happen frequently.
Change Mode
Offline
Related features
Related Parameters
[BSC]ShoEnable
[Cell]DistanceN
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-271
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PBGTHoN / PBGTHoP
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
N value: 1..20;
P value: 1..20
Step: 1
Unit
None
Default Value
[3, 2]
Default Value
Configuration Reason
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-272
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLQUALRAPIDHON
3GPP Name
None
3GPP Reference
None
This parameter indicates the N value for quick handover due to downlink
quality (on SDCCH). This parameter indicates the N value for quick
handover due to downlink quality (on SDCCH). The quick handover due
to downlink quality is to optimize the call drop rate.
For example, there exists strong interference zone in a cell. After an
MS is handed-over into the cell, the call is drop due to poor downlink
transmission quality. The current algorithm is not suitable, so a new
handover algorithm due to downlink quality is created. The quick
handover adopts the original quality value. The neighbor cell does not
Description
Managed Object
Cell
1..21
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
quick handover.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-273
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLQUALRAPIDHOTHS
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold value for quick handover due to
downlink quality on SDCCH. The quick handover due to downlink quality
is to optimize the call drop rate. For example, there exists strong interference zone in a cell. After an MS is handed-over into the cell, the call is
drop due to poor downlink transmission quality. The current algorithm is
not suitable, so a new handover algorithm due to downlink quality is created. The quick handover adopts the original quality value. The neighbor
Description
cell does not use the window mode. The P value is the same as N value.
Managed Object
Cell
0..70
Step: 1
Unit
None
Default Value
60
Default Value
Configuration Reason
conducted.
The possibility to start the handover becomes smaller if the quality value
becomes higher. If the parameter value is set too high, call drop will
Adjustment Suggestion
happen easily. If the value is too low, there will be more handovers. This
function increase the risk of handover failure ratio.
Change Mode
Offline
5-274
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DistanceThs
3GPP Name
None
3GPP Reference
None
The distance between MS and BTS can impact the handover. The
decision process is as follows: For the latest N average values of TA
(distance), if P of the N values rises above relevant threshold value,
then perform handover. The handover is due to MS being out of the cell
Description
service range.
Managed Object
Cell
The value range for extended cell is 0 .. 219; the value range for
ordinary cell is 0..63
. Step: 1
Unit
None
Default Value
63
Default Value
Configuration Reason
maximum value.
5-275
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_23
3GPP Name
None
3GPP Reference
None
This parameter describes whether to allow the SDCCH handover
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
5-276
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoThs
3GPP Name
None
3GPP Reference
None
During SDCCH handover, after measurement reports are obtained, it
can be decided whether to conduct downlink fast moving handover.
If the recent N consecutive downlink levels (not the average values) are
higher than the sum of threshold and offset values, handover should be
conducted. The reason for handover is fast moving. The parameter
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
10
Default Value
Configuration Reason
Adjustment Suggestion
5-277
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoN
3GPP Name
None
3GPP Reference
None
During SDCCH handover, after measurement reports are obtained, it
can be decided whether to conduct downlink quick handover.
If the recent N consecutive downlink levels (not the average values) are
higher than the sum of threshold and offset values, handover should be
conducted. The reason for handover is rapid moving. The parameter
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
The N value for the downlink fast moving handover should nit be too
Configuration Reason
5-278
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_0
3GPP Name
None
3GPP Reference
None
After measurement reports are obtained, it can be decided whether to
conduct SDCCH downlink quick handover.
If the recent N consecutive downlink levels (not the average values) are
higher than the sum of threshold and offset values, handover should be
conducted. The reason for handover is fast moving. The parameter
DLRapidHoOffset_2 defines the offset threshold value for the downlink
fast moving handover when the train speed is lower than 250km/h.
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
5-279
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Different offset value is set for different speed level. Fast moving speed
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_1
3GPP Name
Internal
3GPP Reference
None
After measurement reports are obtained, the arbitration can be made
for downlink handover caused by fast moving.
The fast moving is one of the triggering cause for downlink handover.
The arbitration process is the following: if the recent N consecutive
downlink levels (not the average values) are higher than the sum of
threshold and offset values, handover should be conducted. The reason
for handover is fast moving. The parameter DLRapidHoOffset_1 defines
the offset threshold for the handover on SDCCH caused by fast moving
speed of 150km//h to 250km/.
Description
5-280
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
The offset should be set lower if the speed becomes faster. Thus the
This configuration fits for the radio covering area of high-speed railway
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DLRapidHoOffset_2
3GPP Name
None
3GPP Reference
None
5-281
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
The offset should be set lower if the speed becomes faster. Thus the
handover becomes more frequent.
Change Mode
Offline
Related features
Related Parameters
[Cell]HoControl_23
Relationship
This parameter takes effect when the system support SDCCH downlink
quick handover.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-282
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_0
3GPP Name
Internal
3GPP Reference
None
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
enabled if needed.
This function is usually applied in the area with high MS moving speed
or with small coverage. The SDCCH handover can be enabled to avoid
call setup failure.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-283
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_3
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow SDCCH handover triggered
Description
by distance change.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
by default.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-284
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_4
3GPP Name
None
3GPP Reference
None
This parameter indicates whether an SDCCH handover can be
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-285
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_30
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow directed retry during PBGT
handover on SDCCH. MS can be handed-over to TCH channel of a
better cell after the core network gives an assignment without SDCCH
Description
handover.
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
the TCH channel of a better cell to reduce the call drop ratio.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5-286
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_11
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow dynamic adjustment of
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-287
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_12
3GPP Name
None
3GPP Reference
None
This parameter determines whether to allow uplink rapid fading
Description
handover.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
by default.
The uplink rapid fading handover is applied on MS with fast moving
speed, definite direction and fast fading caused by blocks. If this function
Adjustment Suggestion
handover.
Then the call drop ratio and coverage ratio can be improved under
special circumstances.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-288
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoControl_19
3GPP Name
None
3GPP Reference
None
This parameter describes whether to allow the SDCCH handover
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
This function will result in frequent handover, but will help to lower the
call drop ratio.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_20
3GPP Name
None
5-289
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter describes whether to allow the SDCCH handover
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
be modified.
This function will result in frequent handover, but will help to lower the
call drop ratio.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_21
3GPP Name
None
5-290
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter describes whether to allow the SDCCH handover
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
This function will result in frequent handover, but will help to lower the
call drop ratio.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_22
3GPP Name
None
3GPP Reference
None
5-291
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
This function will result in frequent handover, but will help to lower the
call drop ratio.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_25
3GPP Name
None
3GPP Reference
None
5-292
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
This parameter is enabled when the serving cell has poor downlink
Configuration Reason
This parameter is enabled when the serving cell has poor downlink
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]ShoEnable
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
This parameter means the site ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Handover
Modifying
Version
Parameter
Detail
Control->Basic Properties 1
None
Modifying
None
BTS ID
5-294
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Handover
Control->Basic Properties 1
5-295
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter
Modifying
Version
Parameter
None
Modifying
Detail
None
Abbreviation
S3GHocId
3GPP Name
None
3GPP Reference
None
This parameter means the ID of cell UTRAN handover control. It cannot be
Description
modified.
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Handover
Modifying
Version
Parameter
Detail
Control->Basic Properties 1
None
Modifying
None
5-296
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoFailPenalTm3G
3GPP Name
None
3GPP Reference
None
This parameter defines a protection period to prevent an immediate han-
Description
Managed Object
Cell
1..255
Step: 1
Unit
Default Value
Default Value
Configuration Reason
If this parameter is set too low, there will not be enough penalty time and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-297
SJ-20100524164252-017|2011-07-28 (R1.4)
5.5.1.5 Slippery window size for calculating Ec/No or RSCP average value to be zero
(HoWindow3G)
Slippery window size for calculating Ec/No or RSCP average value to be
Full Name
zero
Abbreviation
HoWindow3G
3GPP Name
Hreqave
3GPP Reference
3GPP TS 45.008
In the GSM system, BSC makes handover arbitration according to
the measurement data. To avoid the negative impact of the suddenly
changed measurement values resulting from complicated radio
transmission, BSC, when making handover arbitration, no longer uses
the original measurement data but uses a series of average values of
the measurement data. The measurement data from a UTRAN adjacent
cell should also be averaged.
HoWindowUTRAN of Ec/No or RSCP average value is the window size
to calculate Ec/No or RSCP average value in adjacent UTRAN cell, that
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
might be made.
Adjustment Suggestion
If the value is set high, arbitration for handover needs more time and
call drop will happen.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-298
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ZeroAllowed3G
3GPP Name
None
3GPP Reference
None
According to GSM specifications, an MS can report the measurement
data of at most six adjacent cells with strongest signal strength. Thus
the measurement results recorded by BSC might not be consecutive.
For cells whose signal strength is less than -110 dBm, the measurement
data are not reported. BSC marks measurement data of such adjacent
cells as 0.
This parameter gives flexibility for occurrences of 0 in measurement
data averaging. However, excessive occurrences of 0 indicate that
the adjacent cells are of poor signal strength. The ZeroAllowed value
in average value calculation indicates the allowed number of 0 in a
average value calculation.
To be specific, during averaging, if the count of 0s in the sampling
count exceeds ZeroAllowed, these sampling values are hardly reliable,
and the measurement average will be the sum of the reported values
divided by NCellWindow. If the count of 0s in the reported values does
not exceed ZeroAllowed, these sampling values are reliable and the
measurement average will be the sum of the reported values divided by
Description
Managed Object
Cell
0..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-299
SJ-20100524164252-017|2011-07-28 (R1.4)
If the allowed number of 0 is too small, some good cells might be missed;
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
UTRAN handover
Abbreviation
ServiceHo
3GPP Name
Service Handover
3GPP Reference
3GPP TS 48.008
This parameter indicates UTRAN handover priority control. MSC sends
Service Handover parameter to BSC through ASSIGNMENT REQUEST
and HANDOVER REQUEST messages. Service Handover parameter
has three values, including "prefer UTRAN handover", "not prefer to
UTRAN handover", "not allow to UTRAN handover", taking actions on
subsequent BSC handover arbitration. ServiceHo can be configured as
the default value used while MSC does not deliver Service Handover
parameter, or be configured as BSC forcedly using the mode set by
ServiceHo instead of using Service Handover parameter delivered by
Description
MSC.
5-300
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: Prefer to handover to UTRAN cell;
1: Not prefer to handover to UTRAN cell;
2: Not allow handover to UTRAN cell;
3: Based on the information from MSC, prefer to handover to UTRAN
cell by default;
4: Based on the information from MSC, not prefer to handover to UTRAN
cell by default;
5: Based on the information from MSC, not allow handover to UTRAN
cell by default;
Unit
None
3: Based on the information from MSC, prefer to handover to UTRAN cell
Default Value
by default;
Default Value
Configuration Reason
Adjustment Suggestion
adjusted as needed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
FDD/TDD handover
Abbreviation
FDDTDDPrio
5-301
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the priority control of FDD/TDD handover.
When FDD adjacent cells and TDD adjacent cells exist together, to
control the selection sequence of a target cell, FDDTDDPrio parameter
Description
Managed Object
Cell
0: Prefer to handover to FDD cell;
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadHoRSCPThsFDD
5-302
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter is used for traffic handover. First you should configure
a traffic handover threshold and inter-system handover switch. This
parameter is used for arbitration to 3G cell due to traffic overload. If
there are at least HoRSCP_N_FDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_FDD of
HoRSCP_N_FDD latest RSCP average values are not lower than the
sum of LoadHoRSCPThsFDD and HoRSCPOffsetUTRAN, the traffic
handover from GSM to UTRAN can be triggered.
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Usually -75 dBm can ensure the good accessibility and voice quality.
This parameter should not be set higher than HoRSCPThsFDD. To
implement the load-based handover, BSC needs to inform its traffic
load to adjacent BSS or RNS through LOAD INDICATION information
(BSSAP) sent timely.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]HoRSCPThsFDD
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-303
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.5.1.10 Ec/No threshold when handover from GSM to 3G for load sharing
(LoadHoEcNoThsFDD)
Full Name
Abbreviation
LoadHoEcNoThsFDD
3GPP Name
None
3GPP Reference
None
This parameter is used for traffic handover. First you shall configure a
traffic handover threshold and inter-system handover switch.
This parameter is used for PS arbitration to 3G cell due to traffic overload.
If there are at least HoEcNo_N_FDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoEcNo_P_FDD of
HoEcNo_N_FDD latest RSCP average values are not lower than the
sum of LoadHoEcNoThsFDD and HoEcNoOffsetUTRAN, the traffic
handover from GSM to UTRAN can be triggered.
Description
Managed Object
Cell
0..49
Step: 1
Unit
dB
Default Value
25
Default Value
Configuration Reason
ensured.
5-304
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]HoEcNoThsFDD
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.5.1.11 RSCP threshold when handover from GSM to TDD for load sharing
(LoadHoRSCPThsTDD)
Full Name
RSCP threshold when handover from GSM to TDD for load sharing
Abbreviation
LoadHoRSCPThsTDD
3GPP Name
None
3GPP Reference
None
5-305
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is used for traffic handover. First you should configure a
traffic handover threshold and inter-system handover switch.
This parameter is used for arbitration to 3G cell due to traffic overload. If
there are at least HoRSCP_N_TDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD of
HoRSCP_N_TDD latest RSCP average values are not lower than the
sum of LoadHoRSCPThsTDD and HoRSCPOffsetUTRAN, the traffic
handover from GSM to UTRAN can be triggered.
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Usually -75 dBm can ensure the good accessibility and voice quality.
This parameter should not be set higher than HoRSCPThsTDD. To
implement the load-based handover, BSC needs to inform its traffic
load to adjacent BSS or RNS through LOAD INDICATION information
(BSSAP) sent timely.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]HoRSCPThsTDD
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-306
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterSysHoCtrl
3GPP Name
None
3GPP Reference
None
This parameter indicates whether intersystem handover within BSC is allowed. The parameters determines whether BSC can issue handover to
Description
3G system.
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterSysRdCtrl
3GPP Name
None
3GPP Reference
None
This parameter determines if allow directed retry to UTRAN cell. When
no service channel is allocated in this cell, a user can try to redirect to
adjacent cell under allowed case by corresponding function switch. If this
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
The switch should be turned off in the cell without adjacent 3G cells; the
Configuration Reason
If this cell has adjacent 3Gcells, this switch can try to redirect to an
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]OutDrEnable
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-308
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCPThsFDD
3GPP Name
None
3GPP Reference
None
If there are at least HoRSCP_N_FDD RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_FDD of
HoRSCP_N_FDD latest RSCP average values is not lower than the sum
of HoRSCPThsFDD and HoRSCPOffsetUTRAN, the PS handover from
GSM to UTRAN can be triggered. This adjacent cell is the candidate tar-
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Usually -75 dBm can ensure the good accessibility and voice quality.
This parameter indicates the minimum threshold for the handover to
FDD network. Set the parameter according to 2/3G interworking. If 3G
network takes priority, this parameter should be set low as needed.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-309
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_N_FDD
3GPP Name
None
3GPP Reference
None
HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not
lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-310
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_P_FDD
3GPP Name
None
3GPP Reference
None
HoRSCP_P_FDD of HoRSCP_N_FDD RSCP average values are not
lower than the sum of HoRSCP_THS_FDD and HoRSCPOffsetUTRAN,
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-311
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoEcNoThsFDD
3GPP Name
None
3GPP Reference
None
There are at least HoEcNo_N_FDD Ec/No average values are reserved for an adjacent UTRAN cell in BSC. At least HoEcNo_P_FDD
of HoEcNo_N_FDD latest Ec/No average values is not lower than the
sum of HO and HoEcNoOffsetUTRAN, the PS handover from GSM to
UTRAN can be triggered. This adjacent cell is the candidate target cell
Description
Managed Object
Cell
0..49
Step: 1
Unit
dB
Default Value
25
Default Value
Configuration Reason
Usually 25 dBm can ensure the good accessibility and voice quality.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-312
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoEcNo_N_FDD
3GPP Name
None
3GPP Reference
None
HoEcNo_P_FDD of HoEcNo_N_FDD Ec/No average values is not lower
than the sum of HO and HoEcNoOffsetUTRAN, the PS handover from
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-313
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoEcNo_P_FDD
3GPP Name
None
3GPP Reference
None
HoEcNo_P_FDD of HoEcNo_N_FDD Ec/No average values is not lower
than the sum of HO and HoEcNoOffsetUTRAN, the PS handover from
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-314
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCPThsTDD
3GPP Name
None
3GPP Reference
None
The parameter defines a threshold. If there are at least HoRSCP_N_TDD
RSCP average values are reserved for an adjacent UTRAN cell in BSC
and at least HoRSCP_P_TDD of HoRSCP_N_TDD latest RSCP average
values are not lower than the sum of HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from GSM to UTRAN can be triggered. This
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Usually -75 dBm can ensure the good accessibility and voice quality.
This parameter indicates the minimum threshold for the handover
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
5-315
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_N_TDD
3GPP Name
None
3GPP Reference
None
The parameter defines a threshold.. If there are at least HoRSCP_N_TDD
RSCP average values are reserved for an adjacent UTRAN cell in BSC
and at least HoRSCP_P_TDD of HoRSCP_N_TDD latest RSCP average
values are not lower than the sum of HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from GSM to UTRAN can be triggered. This
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
5-316
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_P_TDD
3GPP Name
None
3GPP Reference
None
The parameter defines a threshold. If there are at least HoRSCP_N_TDD
RSCP average values are reserved for an adjacent UTRAN cell in BSC
and at least HoRSCP_P_TDD of HoRSCP_N_TDD latest RSCP average
values are not lower than the sum of HoRSCPThsTDD and HoRSCPOffsetUTRAN, the PS handover from GSM to UTRAN can be triggered. This
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-317
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoFailPenalTm3G_PS
3GPP Name
Internal
3GPP Reference
None
If the PS handover to a 3G target cell fails, the cell will be punished in a
period of time, during which no handover will be conducted to this cell.
Description
Managed Object
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
5-318
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoWindow3G_PS
3GPP Name
Internal
3GPP Reference
None
In the GSM system, BSC makes PS handover arbitration according to
the measurement data. To avoid the negative impact of the suddenly
changed measurement values resulting from complicated radio
transmission, BSC, when making handover arbitration, no longer uses
the original measurement data but uses a series of average values of
the measurement data. The measurement data from UTRAN adjacent
data should also be averaged.
HoWindowUTRAN of Ec/No or RSCP average is the window size to
calculate Ec/No or RSCP average in adjacent UTRAN cell, that is,
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
5-319
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
InterSysHoCtrl_PS
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether intersystem handover within BSC is allowed. This parameters determines whether BSC can issue handover to
Description
3G system.
Managed Object
1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
5-320
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ZeroAllowed3G_PS
3GPP Name
Internal
3GPP Reference
None
According to GSM specifications, an MS can report to BSS the measurement data of at most six adjacent cells with strongest signal strength.
Thus the measurement results recorded by BSC might not be consecutive. For cells whose signal strength is less than -110 dBm, the measurement data are not reported. BSC marks measurement data of such
adjacent cells as 0. This parameter gives flexibility for 0 occurrences in
measurement data averaging. However, excessive occurrences of 0 indicate that the adjacent cells are of poor signal strength. The ZeroAllowed
value in average value calculation indicates the allowed number of 0 in a
average value calculation. To be specific, during averaging, if the count
of 0s in the sampling count exceeds ZeroAllowed, these sampling values
are hardly reliable, and the measurement average will be the sum of the
reported values divided by NCellWindow. If the count of 0s in the reported
values does not exceed ZeroAllowed, these sampling values are reliable
and the measurement average will be the sum of the reported values di-
Description
Managed Object
5-321
SJ-20100524164252-017|2011-07-28 (R1.4)
0..31
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDDTDDPrio_PS
3GPP Name
Internal
3GPP Reference
None
This parameter can make preferred handover to FDD cells or to TDD
cells. The parameter indicates the priority control of FDD/TDD handover.
When FDD adjacent cell and TDD adjacent cell coexist, to control the
selection sequence of target cell, the FDDTDDPrio parameter is used to
Description
Managed Object
5-322
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LoadHoRSCPThsFDD_PS
3GPP Name
Internal
3GPP Reference
None
5-323
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-324
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
LoadHoECNoThsFDD_PS
3GPP Name
Internal
3GPP Reference
None
This parameter is used for PS handover. First you should set a traffic
threshold and an inter-system handover switch.
This parameter is
Managed Object
Step: 1
Unit
dB
Default Value
25
Default Value
Configuration Reason
be successful.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-325
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
LoadHoRSCPThsTDD_PS
3GPP Name
Internal
3GPP Reference
None
This parameter is used for PS handover. First you should configure a
traffic handover threshold and inter-system handover switch. This parameter is used PS arbitration to 3G cell due to traffic overload. If there
are at least HoRSCP_N_TDD_PS RSCP average values are reserved
for an adjacent UTRAN cell in BSC and at least HoRSCP_P_TDD_PS
of HoRSCP_N_TDD_PS latest RSCP average values is not lower than
the sum of LoadHoRSCPThsTDD_PS and HoRSCPOffset3G_PS, the PS
handover from GSM to UTRAN can be triggered. This parameter value
Description
Managed Object
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-326
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoRSCPThsFDD_PS
3GPP Name
Internal
3GPP Reference
None
There are at least HoRSCP_N_FDD_PS RSCP average values are reserved for an adjacent UTRAN cell in BSC. At least HoRSCP_P_FDD_PS
of HoRSCP_N_FDD latest RSCP average values is not lower than the
sum of HoRSCPThsFDD_PS and HoRSCPOffset3G_PS, the PS handover from GSM to UTRAN can be triggered. This adjacent cell is the
Description
Managed Object
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-327
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_P_FDD_PS
3GPP Name
Internal
3GPP Reference
None
HoRSCP_P_FDD_PS of HoRSCP_N_FDD_PS RSCP average values
is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOff-
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 3.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-328
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_N_FDD_PS
3GPP Name
Internal
3GPP Reference
None
HoRSCP_N_FDD_PS of HoEcNo_N_FDD_PS Ec/No average values
is not lower than the sum of HoRSCP_THS_FDD_PS and HoRSCPOff-
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 4.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-329
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoEcNoThsFDD_PS
3GPP Name
Internal
3GPP Reference
None
There are at least HoEcNo_N_FDD_PS Ec/No average values are reserved for an adjacent UTRAN cell in BSC. At least HoEcNo_P_FDD_PS
of HoEcNo_N_FDD_PS latest Ec/No average values is not lower than the
sum of HoEcNoThsFDD_PS and HoEcNoOffset3G_PS, the PS handover
from GSM to UTRAN can be triggered. This adjacent cell is the candidate
Description
Managed Object
Step: 1
Unit
None
Default Value
25
Default Value
Configuration Reason
be successful.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-330
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoEcNo_P_FDD_PS
3GPP Name
Internal
3GPP Reference
None
HoEcNo_P_FDD_PS of HoEcNo_N_FDD_PS Ec/No average values
is not lower than the sum of HoEcNoThsFDD_PS and HoEcNoOff-
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 3.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoEcNo_N_FDD_PS
3GPP Name
Internal
3GPP Reference
None
HoEcNo_P_FDD_PS of HoEcNo_N_FDD_PS Ec/No average values
is not lower than the sum of HoEcNoThsFDD_PS and HoEcNoOff-
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 4.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCPThsTDD_PS
3GPP Name
Internal
5-332
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
There are at least HoRSCP_N_TDD_PS RSCP average values are reserved for an adjacent UTRAN cell in BSC. At least HoRSCP_P_TDD_PS
of HoRSCP_N_TDD_PS latest RSCP average values is not lower than
the sum of HoRSCPThsTDD_PS and HoRSCPOffset3G_PS, the PS handover from GSM to UTRAN can be triggered. This adjacent cell is the
Description
Managed Object
Step: 1
Unit
None
Default Value
35
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCP_N_TDD_PS
5-333
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Internal
3GPP Reference
None
There are at least HoRSCP_N_TDD_PS RSCP average values are reserved for an adjacent UTRAN cell in BSC. At least HoRSCP_P_TDD_PS
of HoRSCP_N_TDD_PS latest RSCP average values is not lower than
the sum of HoRSCPThsTDD_PS and HoRSCPOffset3G_PS, the PS handover from GSM to UTRAN can be triggered. This adjacent cell is the
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 4.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-334
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoRSCP_P_TDD_PS
3GPP Name
Internal
3GPP Reference
None
There are at least HoRSCP_N_TDD_PS RSCP average values are reserved for an adjacent UTRAN cell in BSC. At least HoRSCP_P_TDD_PS
of HoRSCP_N_TDD_PS latest RSCP average values is not lower than
the sum of HoRSCPThsTDD_PS and HoRSCPOffset3G_PS, the PS handover from GSM to UTRAN can be triggered. This adjacent cell is the
Description
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 3.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-335
SJ-20100524164252-017|2011-07-28 (R1.4)
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
This parameter means the site ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Cell Con-
Modifying
Version
Parameter
Detail
trol->Basic parameters 1
None
Modifying
None
5-336
SJ-20100524164252-017|2011-07-28 (R1.4)
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
5-337
SJ-20100524164252-017|2011-07-28 (R1.4)
Modifying
Version
Parameter
trol->Basic parameters 1
None
Modifying
Detail
None
UTRAN BTS ID
Abbreviation
S3GBtsId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Cell Con-
trol->Basic parameters 1
Modifying
None
5-338
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter
Modifying
Detail
None
Abbreviation
SI2QuaterPos
3GPP Name
SI2quater_POSITION
3GPP Reference
Description
Managed Object
Cell
0, 1
0: Broadcast on normal BCCH block;
1: Broadcast on extended BCCH block (AGCH_BLOCK reservation
value will be 1)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[Cell]BsAgBlkRes
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-339
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
ReportTypeCS
3GPP Name
REPORT_TYPE
3GPP Reference
Description
Managed Object
Cell
0, 1
0: If at least one BSIC is configured for each frequency in BA list, the
UE uses "enhanced measurement report" message; otherwise the UE
uses "normal measurement report".
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
5-340
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Qsearch_I
3GPP Name
Qsearch_I
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
0..6: Indicates field strength L = -98 + n*4 dBm;
7: Indicates "always";
8..14: Indicates field strength L = -78 + 4 * (n-8) dbm;
Unit
None
Default Value
15
Default Value
Configuration Reason
can be conducted.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-341
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Qsearch_C
3GPP Name
Qsearch_C
3GPP Reference
Description
"never".
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
0..6: Indicates field strength L = -98 + n*4 dBm;
7: Indicates "always";
8 ... 14: Indicates field strength L = -78 + 4 * (n-8) dbm;
Unit
None
Default Value
15
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
5-342
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
QsearchCInit
3GPP Name
Qsearch_C_Initial
3GPP Reference
Description
Managed Object
Cell
0, 1
0: Qsearch_I parameter;
1: always measures.
Unit
None
Default Value
Default Value
Configuration Reason
Use Qsearch_I.
Change Mode
Offline
Related features
None
5-343
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
SvrBandRprtCS
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
5-344
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IndexStartEMR
3GPP Name
Absolute_Index_Start_EMR
3GPP Reference
3GPP TS 44.018
Description
Managed Object
Cell
32, 64
Unit
None
Default Value
32
Default Value
Configuration Reason
Adjustment Suggestion
is set 32 or more just when more than 32 adjacent cells are needed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-345
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDDrepQntCS
3GPP Name
FDD_REP_QUANT
3GPP Reference
Description
Managed Object
Cell
0, 1
0: RSCP, UE receiving power of CPICH scramble of UTRAN cell, the
unit is dBm;
1: Ec/No, ratio of the receiving power to thermal noise for CPICH
Unit
None
Default Value
Default Value
Configuration Reason
The default value is adopted. The value can be adjust to "0" as needed.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
5-346
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDD_Qmin
3GPP Name
FDD_Qmin
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0 = -20 dB
1 = -6 dB
2 = -18 dB
3 = -8 dB
4 = -16 dB
5 = -10 dB
6 = -14 dB
7 = -12 dB
Unit
None
Default Value
Default Value
Configuration Reason
Middle value
Key parameter in 2G -> 3G cell re-selection. The recommended value
for the parameter is 7(-12dB). The cell re-selection arbitration threshold
Change Mode
Offline
5-347
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
FDDMulRatrrptCS
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
5-348
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
FDD_Qoffset
3GPP Name
FDD_Qoffset
3GPP Reference
Description
1 = -28 dB;
5-349
SJ-20100524164252-017|2011-07-28 (R1.4)
2 = -24 dB;
15 = 28 dB
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.6.1.15 RReporting threshold for the Ec/No or RSCP that is not reported
(FDDRprtTho2CS)
Full Name
Abbreviation
FDDRprtTho2CS
3GPP Name
FDD_REPORTING_THRESHOLD_2
5-350
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP TS 44.018,
3GPP Reference
3GPP TS 45.008
This is a newly added parameter for GSM/WCDMA inter-operation
during the second phase. It indicates the measurement report threshold
for Ec/No or RSCP parameters.
During the first phase of GSM/WCDMA inter-operation, only the MS is
required to report the signal-noise ratio (Ec/N0) or the measurement
result of the signal strength (RSCP). The MS is required to consider the
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]FDDRepQntCS
If FDDRepQntCS is 0, this parameter indicates the Ec/No threshold
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-351
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ECSC_3G
3GPP Name
3GPP Reference
44.018
This parameter indicates whether a UE is required to send UTRAN class-
Description
Managed Object
Cell
Yes, No
NO: Not allow to send "UTRAN class mark change" message
Yes: Both ECSC and UE control whether the UE sends "UTRAN
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-352
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
FDD_RSCPmin
3GPP Name
FDD_RSCPmin
3GPP Reference
45.008
When this parameter is being broadcast in the system messages, RSCP
threshold in FDD cell re-selection is FDD_RSCPmin min((P_MAX
21 dBm), 3 dB). P_MAX is the maximum transmission power of an MS
under FDD mode.
This parameter is broadcast to MS through SI2quater on BCCH, and is
Description
Managed Object
Cell
0..15
0 = -114 dBm, 1 = -112 dBm, 2 = -110 dBm, 3 = -108 dBm, 4 = -106
dBm, 5 = -104 dBm, 6 = -102 dBm, 7 = -100 dBm, 8 = -98 dBm, 9 = -96
dBm, 10 = -94 dBm, 11 = -92 dBm, 12 = -90 dBm, 13 = -88 dBm, 14
= -86 dBm, 15 = -84 dBm.
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-353
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDD_Qmin_Offset
3GPP Name
FDD_Qmin_Offset
3GPP Reference
45.008
This parameter indicates the FDD_Qmin parameter offset. When FDD
adjacent cell re-selection is being conducted, the Ec/No (code-noise ratio)
Description
Managed Object
Cell
0..7
(2n)dB,
0: 0 dB;
...
7: 14 dB
Unit
None
Default Value
Default Value
Configuration Reason
cell re-selection.
Adjustment Suggestion
be set high.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-354
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReportRateCS
3GPP Name
REPORTING_RATE
3GPP Reference
45.008
This parameter indicates the frequency for measurement report hand-in
by adjacent cells. Refer to REP_PRIORITY. The cells with low priorities
has a low hand-in frequency. However, there must be one hand-in
Description
in 4 times.
Managed Object
Cell
0, 1
0: normal;
1: low
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
5-355
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MulBndRprtCS
Abbreviation
MulBndRprtCS
3GPP Name
MULTIBAND_REPORTING
3GPP Reference
45.008
This parameter is to control the number of reports of different adjacent
Description
Managed Object
Cell
0, 1, 2, 3
0: MS reports the survey results of six known and allowed adjacent cells
with the strongest NCC according to the signal intensity, regardless of
which frequency band adjacent cells are in;
1: MS reports the survey result of one adjacent cell with the strongest
signals in the frequency bands (excluding that of local cell) in adjacent
cell table. In the remained locations, MS reports the adjacent cells
in the frequency band of local cell. If there are still more remained
locations, MS reports the second strongest adjacent cell, regardless
of their frequency bands;
2: MS reports the measurement result of two adjacent cells with
strongest signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remained locations, MS reports
the adjacent cells in the frequency band of local cell. If there are still
more remained locations, MS reports the second strongest adjacent cell,
regardless of their frequency bands;
3: MS reports the measurement result of three adjacent cells with
strongest signal in the frequency bands in adjacent cell list (excluding
frequency band of serving cell). In the remaining locations, MS reports
the adjacent cells in the frequency band of local cell. If there are still
5-356
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Default Value
Default Value
traffic bearing, that is, the hand-in should base on the signal strength,
Configuration Reason
same priority.
In a dual-frequency environment, the 900M cells can be set to report
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
ScaleOrdCS
3GPP Name
SCALE_ORD
3GPP Reference
45.008
5-357
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter defines the added offset when UE reports signal field
intensity. If the field intensity of a certain GSM adjacent cell is n dBm, UE
will map n+ ScaleOrdCS to the original value corresponding to n when
mapping to RXLEV (0 .. 63). It applies only in the case that "enhanced
measurement report" message is used.
If the field intensity of adjacent cell exceeds -48 dBm, the real value
can be reported by setting this parameter. UE includes the SCALE
value when it reports "enhance measurement report" message. If
SCALE_ORD = 2, UE uses the value of cell that reports the best signal
Description
level.
Managed Object
Cell
0, 1, 2
0: 0 dB;
1: 10 dB;
2: Automatic, determined by UE
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-358
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TDD_Qoffset
3GPP Name
TDD_Qoffset
3GPP Reference
45.008(V8.3.0)
This parameter indicates the RSCP threshold when the an MS is handed-
Description
Managed Object
Cell
0 = -105 dBm, 1 = -102 dBm, 2=-99 dBm, 3 = -96 dBm, 4 = -93 dBm, 5
= -90 dBm, 6 = -87 dBm, 7 = -84 dBm, 8 = -81 dBm, 9 = -78 dBm, 10 =
-75 dBm, 11 = -72 dBm, 12 = -69 dBm, 13 = -66 dBm, 14 = -63 dBm, 15
= -60 dBm.
Unit
None
Default Value
Default Value
Configuration Reason
When the RSCP of a TDD cell is -81 dBm, the signals are strong.
This parameter can be set lower if the cell re-selection to a TDD cell
Adjustment Suggestion
is expected to be easier.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-359
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TDDMulRatRrptCS
3GPP Name
XXX_MULTIRAT_REPORTING
3GPP Reference
45.008
This parameter indicates the maximum number of UTRAN/TDD adjacent
cells included in measurement report or strongest cell list. If UTRAN/TDD
adjacent cells are not full, the vacancies are used for GSM adjacent cells
Description
Managed Object
Cell
0, 1, 2, 3
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
higher.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-360
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InvldBSICRprtCS
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
45.008
NCC in BSIC of some GSM cells are allowed, but BCC is invalid (that is,
the radio system does not have adjacent cells corresponding to BCC).
This parameter indicates whether the system allows UE to report field
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
BCC does not know the adjacent cell, which is not configured in BSC.
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-361
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SearchPrioCS3G
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
45.008
This parameter indicates whether to allow UE to search UTRAN adjacent
cells in the frame where BSIC decoding is needed. If allowed, UE can
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
set as "Yes".
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-362
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtOffsetCS850
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoCS850
5-363
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
The GSM 850 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS850 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
Whether it can be reported in certain period depends on signal level,
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
The measurement value is not limited during the report of GSM 850 M
Configuration Reason
adjacent cells.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-364
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtOffsetCS900
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoCS900
5-365
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
The GSM 900 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS900 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
Whether it can be reported in certain period depends on signal level,
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
The measurement value is not limited during the report of GSM 900 M
Configuration Reason
adjacent cells.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-366
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtOffsetCS1800
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoCS1800
5-367
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
The GSM 1800 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS1800 (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV). As to whether it can be reported in certain period, it also depends on signal level, RepPrioPS, MulBndRprtPS
Description
and RprtOffsetPS900.
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
The measurement value is not limited during the report of GSM 1800 M
Configuration Reason
adjacent cells.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-368
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtOffsetCS1900
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoCS1900
5-369
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
The GSM 1900 M adjacent cells can be reported only when signal level
in the cell is higher than or equal to RprtThoCS1900 (dimensionless,
corresponding to RXLEV portion in measurement report, different
mapping relationship for different RXLEV).
As to whether it can be reported in certain period, it also depends on
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
The measurement value is not limited during the report of GSM 1900 M
Configuration Reason
adjacent cells.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-370
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
FDDRprtOffsetCS
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
An offset can be added to an FDD adjacent cell when the priority sequence
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-371
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
FDDRprtThoCS
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
When reporting to UTRAN/FDD adjacent cells, only when signal level in
the cell is higher than or equal to FDDRprtThoCS (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. As to whether it can
be reported in certain period, it also depends on signal level, RepPrioCS,
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6 .. 36, each level 6;
7: never
Unit
None
Default Value
Default Value
Configuration Reason
FDD
If more FDD adjacent cells are needed, the threshold should be set
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-372
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TDDRprtOffsetCS
3GPP Name
XXX_REPORTING_OFFSET
3GPP Reference
45.008
An offset can be added to an TDD adjacent cell when the priority sequence
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-373
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TDDRprtThoCS
3GPP Name
XXX_REPORTING_THRESHOLD
3GPP Reference
45.008
When reporting to UTRAN/TDD adjacent cells, only when signal level in
the cell is higher than or equal to TDDRprtThoCS (dimensionless, corresponding to RXLEV portion in measurement report, different mapping
relationship for different RXLEV), it can be reported. Whether it can be
reported in certain period depends on signal level, RepPrioCS, TDDMul-
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
The measurement value is not limited during the report of TDD adjacent
Configuration Reason
cells.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-374
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ScaleOrdPS
3GPP Name
SCALE_ORD
3GPP Reference
Description
Managed Object
Cell
(0, 1, 2)
0: 0 dB;
1: 10 dB;
2: Automatic, determined by UE
Unit
None
Default Value
5-375
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Only used for enhanced measurement report. Not applied yet. The
Configuration Reason
reported level range is -100 dB .. -38 dB, that is, the level mapped
during 0 .. 63 will raise by10dB; when the parameter is 2, SCALE value
will be the minimum offset value that can be reported by the strongest
adjacent cell. For example, if the strongest signal intensity in an adjacent
cell is -30 dB, the SCALE value is 18. Then all the adjacent cells can
be reported. Usually no offset is needed. The parameter should be 0.
For the adjacent cells with special signal strength, this parameter can
be adjusted to 1 or 2.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReportTypePS
3GPP Name
REPORT_TYPE
3GPP Reference
5-376
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(0, 1)
Unit
None
Default Value
Default Value
Configuration Reason
recommended by protocol is 1.
At least one BSIC is allocated for each frequency point, and MS has
received the BSIC from all adjacent cells. If the measurement type
Adjustment Suggestion
report to measure the adjacent cell. If the above conditions are not
met, it is recommended to set the parameter as 1, using the common
measurement report.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-377
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SvrBandRprtPS
3GPP Name
SERVING_BAND_REPORTING
3GPP Reference
Description
ORDER message.
Managed Object
Cell
(0, 1, 2, 3)
Unit
None
Default Value
Default Value
Configuration Reason
a same frequency.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-378
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ReportRatePS
3GPP Name
REPORTING_RATE
3GPP Reference
Description
Managed Object
Cell
(0, 1)
0: normal
1: lowRefer to RepPrioPS
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]RepPrioPS
The parameter RepPrioPS configures every adjacent cell; the parameter
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-379
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Qsearch_P_0/Qsearch_P_1
3GPP Name
Qsearch_P
3GPP Reference
Description
search.
Managed Object
Cell
0 ..15
0..7 (corresponding to -98, -94, ... , -74 dBm, always)
Unit
None
Default Value
15
Default Value
The initiated value is set as W/TD not enabled. Not start the
Configuration Reason
measurement.
This parameter is not sent in SI2quater. Even it is broadcast in
SI2quater, the Qsearch_P in SI2quater takes effect only after the PMO
or PCCO message including adjacent cell information is sent on PACCH.
Qsearch_P is also included in a PMP or PCCO message. Therefore,
this parameter is sent to MS in transmission state. In idle status, an MS
still uses the Qsearch_I parameter. If an MS is always being expected to
Adjustment Suggestion
5-380
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
FDD_GPRS_Qoffset_0/FDD_GPRS_Qoffset_1
3GPP Name
FDD_GPRS_Qoffset
3GPP Reference
Description
5-381
SJ-20100524164252-017|2011-07-28 (R1.4)
15 = 28 dB
Managed Object
Cell
0 ..15
0: indicates always selecting adjacent cells of this 3G FDD;
1 = -28 dB;
2 = -24 dB;
...
15 = 28 dB
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
5-382
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
TDD_GPRS_Qoffset_0/TDD_GPRS_Qoffset_1
3GPP Name
TDD_GPRS_Qoffset
3GPP Reference
Description
Managed Object
Cell
5-383
SJ-20100524164252-017|2011-07-28 (R1.4)
Old mode: 0 .. 15
0: indicates "always select adjacent cells of this 3G TDD";
1 = -28 dB;
2 = -24 dB;
...
15 = 28 dB;
The value range under the new work mode: 0 .. 15
0 = -105 dBm, 1 = -102 dBm, 2 = -99 dBm, 3 = -96 dBm, 4 = -93 dBm,
5 = -90 dBm, 6 = -87 dBm, 7 = -84 dBm, 8 = -81 dBm, 9 = -78 dBm,
10 = -75 dBm, 11 = -72 dBm, 12 = -69 dBm, 13 = -66 dBm, 14 = -63
Value Range and Step
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-384
SJ-20100524164252-017|2011-07-28 (R1.4)
5.6.3.8 PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN reselecting
cell_1 (FDD_QminPS_0/FDD_QminPS_1)
PS MIN Ec/No of UTRAN reselecting cell_0/PS MIN Ec/No of UTRAN
Full Name
reselecting cell_1
Abbreviation
FDD_QminPS_0/FDD_QminPS_1
3GPP Name
FDD_Qmin
3GPP Reference
Description
Managed Object
Cell
The value range is 0..7
0 = -20 dB;
1 = -6 dB
2 = -18 dB
3 = -8 dB
4 = -16 dB
5 = -10 dB
6 = -14 dB
7 = -12 dB
Unit
None
Default Value
Default Value
Configuration Reason
Middle value
5-385
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDD_Qmin_OffsetPS_0/FDD_Qmin_OffsetPS_1
3GPP Name
FDD_Qmin_Offset
3GPP Reference
Description
5-386
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
The value range is 0..7
0 = 0 dB
1 = 2 dB
2 = 4 dB
3 = 6 dB
4 = 8 dB
5 = 10 dB
6 = 12 dB
7 = 14 dB
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-387
SJ-20100524164252-017|2011-07-28 (R1.4)
5.6.3.10 PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN reselecting
cell_1 (FDD_RSCPminPS_0/FDD_RSCPminPS_1)
PS MIN RSCP of UTRAN reselecting cell_0/PS MIN RSCP of UTRAN
Full Name
reselecting cell_1
Abbreviation
FDD_RSCPminPS_0/FDD_RSCPminPS_1
3GPP Name
FDD_RSCPmin
3GPP Reference
Description
GPRS parameters.
Managed Object
Cell
The value range is 0..15
0 = -114 dBm
1 = -112 dBm
2 = -110 dBm
3 = -108 dBm
...
14 = -86 dBm
15 = -84 dBm
Unit
None
Default Value
5-388
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Refer to the parameter CS. The signal strength with -102 dBm RSCP is
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
FDDRprtTho2PS_0/FDDRprtTho2PS_1
3GPP Name
FDD_REPORTING_THRESHOLD_2
3GPP Reference
Description
5-389
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
FDDRepQntPS
3GPP Name
FDD_REP_QUANT
3GPP Reference
Description
5-390
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(0, 1)
Unit
None
Default Value
Default Value
Configuration Reason
value of FDDRepQntCS is 1.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
FDDMulRatRrptPS
3GPP Name
FDD_MULTIRAT_REPORTING
3GPP Reference
5-391
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(0, 1, 2, 3)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
network.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MulBndRprtPS
3GPP Name
MULTIBAND_REPORTING
5-392
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
(0, 1, 2, 3)
Unit
None
Default Value
Default Value
Configuration Reason
The report is based on signal intensity. All the bands are treated same.
5-393
SJ-20100524164252-017|2011-07-28 (R1.4)
(set 3), and the 1800 M cells can be set to report as few 900 M cells
as possible (set 1).
In a dual-frequency environment, the parameter can be set 0 to limit the
traffic bearing, that is, the cell report should base on the signal strength.
This configuration is good to balance the traffic and lower and reduce
congestion. However, the success ratio of handover, call drop ratio and
coverage ratio might be affected.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TDDMulRatRrptPS
3GPP Name
TDD_MULTIRAT_REPORTING
3GPP Reference
5-394
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(0, 1, 2, 3)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
network.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-395
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
InvldBSICRprtPS
3GPP Name
INVALID_BSIC_REPORTING
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
BCC does not know the adjacent cell, which is not configured in BSC.
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-396
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SearchPrioPS3G
3GPP Name
3G_SEARCH_PRIO
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
set as "Yes".
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-397
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
ServiceCC
3GPP Name
None
3GPP Reference
None
Choose 2G/3G re-select priority control.
0 .. 5, 0: 3G re-selection preferred; 1: 3G re-selection not preferred; 2:
3G re-selection not allowed; 3: Based on the information from SGSN,
3G re-selection preferred by default; 4: Based on the information from
SGSN, 3G re-selection not preferred by default; 5: Based on the
information from SGSN, 3G re-selection not allowed.
This parameter takes effect when NCCC has been started. That is,
Description
Managed Object
Cell
3G re-selection preferred;
3G re-selection not preferred;
3G re-selection not allowed;
Based on the information from SGSN, 3G re-selection preferred by
default;
Based on the information from SGSN, 3G re-selection not preferred
by default;
Based on the information from SGSN, 3G re-selection not allowed by
default;
Unit
None
Default Value
3G re-selection preferred;
Default Value
Configuration Reason
Adjustment Suggestion
preferred).
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-398
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtOffsetPS850
3GPP Name
850_REPORTING_OFFSET
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
5-399
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoPS850
3GPP Name
850_REPORTING_THRESHOLD
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
Configuration Reason
threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
None
5-400
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RprtOffsetPS900
3GPP Name
900_REPORTING_OFFSET
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
5-401
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoPS900
3GPP Name
900_REPORTING_THRESHOLD
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
5-402
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RprtOffsetPS1800
3GPP Name
1800_REPORTING_OFFSET
3GPP Reference
Description
Managed Object
Cell
5-403
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
RprtThoPS1800
3GPP Name
1800_REPORTING_THRESHOLD
3GPP Reference
5-404
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
Configuration Reason
no threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
5-405
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtOffsetPS1900
3GPP Name
1900_REPORTING_OFFSET
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-406
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RprtThoPS1900
3GPP Name
1900_REPORTING_THRESHOLD
3GPP Reference
Description
Managed Object
Cell
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
Configuration Reason
threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
5-407
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
UTRAN/FDD Offset
Abbreviation
FDDRprtOffsetPS
3GPP Name
FDD_REPORTING_OFFSET
3GPP Reference
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
5-408
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
UTRAN/FDD Threshold
Abbreviation
FDDRprtThoPS
3GPP Name
FDD_REPORTING_THRESHOLD
3GPP Reference
Description
prtOffsetCS.
Managed Object
Cell
(0, 1, 2, 3, 4, 5, 6, 7) 0: always;
1..6: corresponding to 6..36, each level 6;
7: never
Unit
None
Default Value
Default Value
Configuration Reason
no threshold.
Adjustment Suggestion
Change Mode
Offline
5-409
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
UTRAN/TDD Offset
Abbreviation
TDDRprtOffsetPS
3GPP Name
TDD_REPORTING_OFFSET
3GPP Reference
The parameter
reported.
Managed Object
Cell
Unit
None
5-410
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
bigger.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
UTRAN/TDD Threshold
Abbreviation
TDDRprtThoPS
3GPP Name
TDD_REPORTING_THRESHOLD
3GPP Reference
Description
Managed Object
Cell
5-411
SJ-20100524164252-017|2011-07-28 (R1.4)
0, 1, 2, 3, 4, 5, 6, 7
0: always;
1..6: corresponding to 6..36, each level 6;
Value Range and Step
7: never
Unit
None
Default Value
Default Value
Configuration Reason
threshold.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
5-412
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter means the site ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Interference
Modifying
Version
Parameter
Cell
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
5-413
SJ-20100524164252-017|2011-07-28 (R1.4)
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Interference
Modifying
Version
Parameter
Detail
Cell
None
Modifying
None
5-414
SJ-20100524164252-017|2011-07-28 (R1.4)
Interference cell ID
Abbreviation
IntfObjectId
3GPP Name
None
3GPP Reference
None
This parameter indicates the identification numbers for adjacent interfer-
Description
ence cells.
Managed Object
Cell
1..6
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
RelationDN
5-415
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the DN of the external cell in the current BSS
system: EcId, or the DN for the related equipment in the current BSS
Description
system: BscId-SiteId-BtsId
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
User Label
5-416
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
UserLabel
3GPP Name
None
3GPP Reference
None
Description
This parameter is the cell handover reselection name for users to identify.
Managed Object
Cell
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Handover
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.7.2.1.2 Site ID
Full Name
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
5-417
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Han-
Modifying
Version
Parameter
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
5-418
SJ-20100524164252-017|2011-07-28 (R1.4)
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Han-
Modifying
Version
Parameter
Detail
None
Modifying
None
Abbreviation
NCellLayer
5-419
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter provides the handover policies in multilayer network
technology and dual-frequency network technology. Multilayer radio
coverage can be formed in the same physical area.
The PBGT handover defined in the specifications at one layer is limited
to reduce the number of handovers during the call, thus improving the
system reliability and communication quality. The policy of handover
between a macro cell layer and a micro cell layer mainly depends on the
moving speed of MS. An MS at higher moving speed will try to stay at
the macro cell layer (upper layer of the micro cell layer), and an MS at
lower moving speed will try to enter the micro cell layer (lower layer
of the macro cell layer). Only in the case of non-PBGT handover and
emergency, will the undefined cell of the service area be considered
as a candidate cell.
Same layer of this cell: Adjacent cell and this cell are in the same layer
(PBGT handover possible); Upper layer of this cell: Adjacent cell is the
upper layer of this cell; Lower layer of this cell: Adjacent cell is the lower
Description
Managed Object
Cell
undefined
Same layer of this cell
upper layer of this cell
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.7.2.1.5 The direction of neighbour cell for downlink rapid handover (NCellDir)
Full Name
Abbreviation
NCellDir
3GPP Name
None
3GPP Reference
None
This parameter indicates the direction of an adjacent cell to the current
Description
Managed Object
Cell
0: Any direction
1: Direction A
2: Direction B
Unit
None
Default Value
Any direction
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
5-421
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
CILimitedThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold that an adjacent cell is limited by
the C/I of C/I limited cell. The adjacent cell belongs to a service cell.
The adjacent cell will be restricted and handover cannot be performed
towards it, when the C/I value of its limited cell and a service cell is
greater than the threshold that the adjacent cell is limited by the limited
Description
cell.
Managed Object
Cell
Unit
None
Default Value
63
The handover algorithm is the algorithm used in special condition, so
Default Value
the default value is set to a maximum value. That is, the restriction does
Configuration Reason
5-422
SJ-20100524164252-017|2011-07-28 (R1.4)
The higher the threshold is, the more difficult it is for limited cell to restrict
Configuration Rule and
Adjustment Suggestion
the adjacent cell, and the easier handover is towards the adjacent
cell.Generally, the purpose of setting limited cell for an adjacent cell is to
avoid handover towards the adjacent cell. Therefore, it is suggested to
set the threshold to a relatively low value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CILimitedNum
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of adjacent cells to which handover
from the serving cell is limited. If the number is 0, handover from the
Description
serving cell to this adjacent cell is not limited by other adjacent cells.
Managed Object
Cell
0..5
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-423
SJ-20100524164252-017|2011-07-28 (R1.4)
Generally, it is recommended not to set C/I limited cell for the adjacent
Configuration Rule and
cell.At such areas as the intersection and crossing, the coverage cells
Adjustment Suggestion
are configured with C/I limited cell, to prevent handover from being
performed to these cells because the signal is unstable.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
LimitedObjectId
3GPP Name
None
3GPP Reference
None
This parameter indicates the location object ID of C/I limited cell in the
Description
Managed Object
Cell
Unit
None
Default Value
Default Value
Configuration Reason
According to actual condition on site, you can configure the adjacent cell
Adjustment Suggestion
object ID of C/I limited cell in the serving cell for one adjacent cell.
Change Mode
Offline
5-424
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Is related cell
Abbreviation
IsRelatedCell
3GPP Name
None
3GPP Reference
None
Only the cell related to the serving cell can be a candidate in rapid fading
handover. This is a parameter of adjacent cell and is used to indicate
Description
Managed Object
Cell
0: Noi
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
handover as needed.
Change Mode
Offline
Related features
Related Parameters
None
5-425
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CCN support
Abbreviation
CCNSupport
3GPP Name
CCN_ACTIVE
3GPP Reference
Description
Managed Object
Cell
0: No
1: Yes
5-426
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
cell; if the parameter is set to "No", CCN mode will not be used during
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNActive
[Cell]SIStatusInd
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoForceResThs
3GPP Name
None
3GPP Reference
None
5-427
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
40
Default Value
The threshold should not be too high or too low. 40 is the recommended
Configuration Reason
value.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginPbgt
3GPP Name
None
5-428
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
0..100
0: -24 dB;
1: -23 dB;
...
100: 76 dB
Step: 1
Unit
None
Default Value
30
Default Value
Configuration Reason
Adjustment Suggestion
is set lower.
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-429
SJ-20100524164252-017|2011-07-28 (R1.4)
5.7.2.1.13 MIN threshold of signal level for handover on power level (HoMarginRxLev)
Full Name
Abbreviation
HoMarginRxLev
3GPP Name
None
3GPP Reference
None
According to GSM specifications, handover decisions will be made after a
series of average values have been obtained. In handover caused by the
level, adjacent cells shall be screened and sequenced. The value should
be higher or equal to the threshold. This parameter defines the signal
Description
Managed Object
Cell
0 .. 100
0: -24 dB;
1: -23 dB;
...
100: 76 dB
Step: 1
Unit
None
Default Value
30
Default Value
The value of a target cell should be set higher to ensure that a handover
Configuration Reason
is conducted correctly.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-430
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoMarginRxQual
3GPP Name
None
3GPP Reference
None
According to GSM specifications, handover decisions will be made after a
series of average values have been obtained. In handover based on quality, adjacent cells shall be screened and sequenced. The value should be
higher or equal to the threshold. This parameter defines the signal quality
Description
Managed Object
Cell
0 .. 100
0: -24 dB;
1: -23 dB;
...
100: 76 dB
Step: 1
Unit
None
Default Value
30
Default Value
The value of a target cell should be set higher to ensure that a handover
Configuration Reason
is conducted correctly.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-431
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Priority of handover
Abbreviation
Hopriority
3GPP Name
None
3GPP Reference
None
According to GSM specifications, cell priority should be considered in sequencing candidate cells. Therefore, there are three decisive factors to
sequence candidate cells: priority, traffic, and radio communication environment. Priority and traffic have the most impact on cell sequencing.
If they lead to the same result, sequence cells by radio conditions. The
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
In most cases, this parameter is set to 3, and the cell priority are the
Configuration Reason
same.
In most cases, this parameter is set to 3, and the cell priority are the
Adjustment Suggestion
same.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-432
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoResObjectId
3GPP Name
None
3GPP Reference
None
This parameter is a unique identification of a reselection object during
Description
Managed Object
Cell
1..64
Unit
None
Default Value
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-433
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
IsHoForceNcell
3GPP Name
None
3GPP Reference
None
In the case of 1800 M and 900 M network site sharing, it is better to
handover subscribers of 900 M network to 1800 M network. At this time,
force traffic transfer can be conducted.
Force traffic transfer is the last method for on-site traffic adjustment. It
is used in dual-frequency networking. The direction of the forced traffic
transfer is definite, that is, 1800 M sector in the same direction. To avoid
impact on other cells, the force traffic transfer is performed only for a
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
In a 900 M and 1800 M site sharing cell, the 1800 Mcell can be set to
Configuration Reason
force traffic transfer cell. In most cases the parameter is set to "No".
This parameter should be set for the target cell in a handover including
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-434
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHon
3GPP Name
None
3GPP Reference
None
During a process of macro to micro handover decision determination, if N
consecutive times of measurement reports meet the conditions to conduct
Description
Managed Object
Cell
1..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
If the parameter is set too high, handover will not be conducted in time
and overloaded traffic cannot be transferred;
If the parameter is set low, wrong or frequent handover will happen, thus
number of call drops will increase.
This parameter configures adjacent cells.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-435
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxForceHoDiff
3GPP Name
None
3GPP Reference
None
Force traffic transfer handover is performed only for one designated cell
and it is restricted by a tolerable level difference MaxLevDiff. This level
difference is lower than PBGT handover threshold in reverse direction,
Description
Managed Object
Cell
0..48
(-24 dB..24 dBm)
Step: 1
Unit
None
Default Value
Default Value
The level difference between two cells should not be too big or too small.
Configuration Reason
9 is a recommended value.
The lower the level difference. the more likely the handover will happen.
The parameter cannot be set too low, otherwise frequent ping-pong
handovers will be caused.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-436
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MsTxPwrMax
3GPP Name
MS_TXPWR_MAX
3GPP Reference
Description
Managed Object
Cell
0..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-437
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioCS
3GPP Name
REP_PRIORITY
3GPP Reference
Description
are preferred. For cells with same RepPrioCS, the cell with greater
5-438
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
Low, High
Unit
None
Default Value
Low
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioPS
3GPP Name
REP_PRIORITY
3GPP Reference
5-439
SJ-20100524164252-017|2011-07-28 (R1.4)
XXXRprtOffsetPS) is preferred.
Managed Object
Cell
(Low, High)
Unit
None
Default Value
Low
Default Value
Configuration Reason
for an adjacent cell should be set high. Then the measurement results
will be reported every time. In most cases every adjacent cell is treated
the same. Cells with low priorities does not report frequently (when
ReportRatePS is set to 1), RepPrioPS is recommended to be set with
the default value.
5-440
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RxLevMin
3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
Description
5-441
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0 .. 63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
level of the corresponding adjacent cell, and the value should also be
higher or equal to the dowmlink level handover threshold, otherwise
frequent handover or reselection will happen.
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTrafficThs
5-442
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of the traffic in a target cell.
The PS handover decision is made based on this value. If the traffic
of this target cell is higher than the threshold value, there will be no
PS handover to this cell.
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
75
Default Value
The resources should be obtained and at the same time the congestion
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
None
3GPP Name
None
5-443
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
Users can click the Select button to select cell or external cell from the
pop-up interface. The internal cell is identified by siteid-btsid, while the
Description
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the signal strength threshold for macro-micro
Description
handover.
Managed Object
Cell
5-444
SJ-20100524164252-017|2011-07-28 (R1.4)
Step: 1
Unit
dBm
Default Value
-91..-90 dBm
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoN_PS
3GPP Name
Internal
5-445
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
The handover from macro-cell to micro-cell is mainly applied to a two-layer
network. That is, the slowly moving MS hands over from the macro-cell
layer to the micro-cell layer. It judges whether the condition allows the
MS moving slowly performs PS handover to a cell one-layer lower than
the current cell. The condition is the level of adjacent cell exceeds the
threshold for N times. This parameter is to count the adjacent cell level
higher than the threshold when PS handover occurs between the macro
Description
Managed Object
Neighbor Cell
1..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoThs_PS
5-446
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Internal
3GPP Reference
None
The handover from macro-cell to micro-cell is mainly applied to a twolayer network. That is, the slowly moving MS hands over from the macrocell layer to the micro-cell layer. It judges whether the condition allows
the MS moving slowly performs PS handover to a cell one-layer lower
than the current cell. The condition is the level of adjacent cell exceeds
the threshold for N times. This parameter is the threshold for cell signal
strength when PS handover occurs between the macro cell and the mico
Description
cell.
Managed Object
Neighbor Cell
0: <-110dBm
1: -110 ~-109 dBm
2: -109 ~ -108dBm
...
61: -50 ~ -49dBm
62: -49~ -48dBm
Unit
None
Default Value
20
Default Value
Usually, when other types of handover are not triggered, -90 dBm is
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-447
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
TargetTrafficThs_PS
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the threshold of the traffic in a target cell. The PS
handover arbitration is made on based on this value. If the traffic of this
target cell is higher than the threshold value, there will be no PS handover
Description
to this cell.
Managed Object
Neighbor Cell
0..100
Step: 1
Unit
Default Value
70
Default Value
Configuration Reason
handover.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-448
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoMarginPbgt_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. The PBGT_PS value of an adjacent cell is also one of the causes
for PS handover. The decision process is as follows: If the PBGT_PS
value of an adjacent cell is higher than the relevant threshold of this cell,
PS handover should be performed to find a more suitable cell. This parameterr is the threshold that must be used in the PS handover decision
Description
to hand over from an adjacent cell to the local cell through PBGT.
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
conducted.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-449
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Margin of RX handover
Abbreviation
HoMarginRxLev_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. In a handover caused by level changes, adjacent cells shall be
screened and sequenced. This parameter is the threshold that must be
used in the handover decision for a PS handover from the adjacent cell
Description
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
strength is conducted.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-450
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginRxQual_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
quality is conducted.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
5-451
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Minimum RX level
Abbreviation
RxLevMin_PS
3GPP Name
Internal
3GPP Reference
None
This parameter defines the minimum receiving strength level (on PBCCH)
required by MS to handover to this cell. It is one of the parameters to
decide preferred cells during handover control. MS in a serving cell constantly monitors the signal strength on PBCCH of adjacent cells. Adjacent
cells with the receiving intensity level higher than the minimum value de-
Description
Managed Object
Neighbor Cell
0: <-110dBm
1: -110..-109 dBm
2: -109..-108dBm
61: -50..-49dBm
62: -49..-48dBm
Unit
dB
Default Value
15
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
5-452
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Is related cell
Abbreviation
IsRelatedCell_PS
3GPP Name
Internal
3GPP Reference
None
Only the cell related to the serving cell can be a candidate in rapid fading
PS handover. This is a parameter of an adjacent cell and is used to indi-
Description
Managed Object
Neighbor Cell
0: Yes
1: No
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
5-453
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Handover priority
Abbreviation
HoPriority_PS
3GPP Name
Internal
3GPP Reference
None
Cell priorities should be taken into consideration when candidate cells are
sequenced during PS handover. Therefore, there are three decisive factors to sequence candidate cells: priority, traffic, and radio communication
environment. Priority and traffic have the most impact on cell sequencing.
If they lead to the same result, sequence cells by radio conditions. The
Description
Managed Object
Neighbor Cell
0..7 (0 means the lowest priority)
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
5-454
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Max TX power of MS
Abbreviation
MsTxPwrMax_PS
3GPP Name
Internal
3GPP Reference
None
Description
Managed Object
Neighbor Cell
0..31
Value Range and Step
Step: 1
Unit
dBm
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-455
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
5-456
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Han-
Modifying
Version
Parameter
dover->Basic Property
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
5-457
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Han-
Modifying
Version
Parameter
dover->Basic Property
None
Modifying
Detail
None
Abbreviation
HoForceResThs
3GPP Name
None
3GPP Reference
None
The force migration will not cause congestion in a cell, so a transfer
reserved resource threshold is set. When resource of object cell is lower
than the congestion threshold, forced handover can be implemented.
The formula to calculate the resource threshold is: 100 - currentTCH
load in a cell >= transfer reserved resource threshold
Current TCH load in a cell = total number of busy TCH *100 / (total
number of busy TCH + total number of idle TCH), the total number
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
40
Default Value
The threshold should not be too high or too low. 40 is the recommended
Configuration Reason
value.
The threshold cannot be set too low to avoid force transfer of overloaded
Adjustment Suggestion
traffic in a cell.
Change Mode
Offline
5-458
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
None
3GPP Name
None
3GPP Reference
None
Users can click the Select button to select cell or external cell from the
pop-up interface. The internal cell is identified by siteid-btsid, while the
Description
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-459
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoObjectId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-460
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginPbgt
3GPP Name
None
3GPP Reference
None
According to GSM specifications, handover decisions will be made after
a series of average values have been obtained.
This parameter defines the threshold used to determine PBGT handover
Description
Managed Object
Cell
0..100
0: -24 dBd;
1: -23 dB;
...
100: 76 dB
Step: 1
Unit
None
Default Value
30
Default Value
The value of a target cell should be set higher to ensure that a handover
Configuration Reason
is conducted correctly.
If the parameter is set high, it is difficult to handover to the target cell; if
set low, it is easier to handover to the target cell. If the parameter is set
lower than 24, the handover to the target cell can be triggered even if the
target cell level is lower than the original cell level.
Adjustment Suggestion
Change Mode
Offline
5-461
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
5.7.3.1.7 MIN threshold of signal level for handover on power level (HoMarginRxLev)
Full Name
Abbreviation
HoMarginRxLev
3GPP Name
None
3GPP Reference
None
According to GSM specifications, handover decisions will be made after
a series of average values have been obtained. In a handover caused
by level changes, adjacent cells shall be screened and sequenced. This
parameter defines the signal strength threshold to determine handover
Description
Managed Object
Cell
0..48
(-24 dBm..24 dBm)
Step: 1
Unit
None
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
5-462
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginRxQual
3GPP Name
None
3GPP Reference
None
According to GSM specifications, handover decisions will be made after
a series of average values have been obtained. In handover based on
quality, adjacent cells shall be screened and sequenced. This parameter
defines the signal quality threshold to determine handover from an adja-
Description
Managed Object
Cell
0..48
(-24 dBm .. 24 dBm)
Step: 1
Unit
None
Default Value
30
Default Value
Configuration Reason
Change Mode
Offline
5-463
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Priority of handover
Abbreviation
HoPriority
3GPP Name
None
3GPP Reference
None
According to GSM specifications, static cell priority should be considered
when candidate cells are sequenced. Therefore, there are three decisive
factors to sequence candidate cells: priority, traffic, and radio communication environment. Static priority and traffic have the most impact on cell
sequencing. If they lead to the same result, sequence cells by radio con-
Description
Managed Object
Cell
0..7
Step: 1
Unit
None
Default Value
Default Value
In most cases, this parameter is set to 3, and the cell priority are the
Configuration Reason
same.
The priority of a cell becomes higher if the parameter is set higher, and
Adjustment Suggestion
Change Mode
Offline
5-464
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IsHoForceNcell
3GPP Name
None
3GPP Reference
None
In the case of 1800 M and 900 M network site sharing, it is better to
handover subscribers of 900 M network to 1800 M network. At this time,
force traffic transfer can be conducted.
Force traffic transfer is the last method for on-site traffic adjustment. It
is used in dual-frequency networking. The direction of the forced traffic
transfer is definite, that is, 1800 M sector in the same direction. To avoid
impact on other cells, the force traffic transfer is performed only for a
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
In a 900 M and 1800 M site sharing cell, the 1800 M cell can be set to
Configuration Reason
force traffic transfer cell. In most cases the parameter is set to "No".
This parameter should be set for the target cell in a handover including
Adjustment Suggestion
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Is related cell
Abbreviation
IsRelatedCell
3GPP Name
None
3GPP Reference
None
In a uplink rapid fading handover, cells related to the serving cell are preferred as the candidate target cells. If there is no related cell, choose in
the sequence of upper layer same layer lower layer. This is a parameter of an adjacent cell and is used to indicate whether an adjacent cell is
Description
Managed Object
Cell
0: No
1: Yes
Unit
None
Default Value
No
Default Value
If a serving cell has enabled uplink rapid fading handover, the cell can
Configuration Reason
The target cells for uplink rapid fading handover are recommended to be
Adjustment Suggestion
Change Mode
Offline
5-466
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoN
3GPP Name
None
3GPP Reference
None
The N value for macro-micro (also P value) The macro-micro handover
Description
Managed Object
Cell
1..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
quick handover.
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-467
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the signal strength threshold for macro-micro
Description
handover.
Managed Object
Cell
0..63
> -48 dBm
-50..-49 dBm
...
-109..-108 dBm
-110..-109 dBm
< -110 dBm
Step: 1
Unit
dBm
Default Value
-91..-90 dBm
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
5-468
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MaxForceHoDiff
3GPP Name
None
3GPP Reference
None
Directed handover is performed only for one designated cell and it is restricted by a tolerable level difference. This tolerable level difference is
lower than PBGT handover threshold in reverse direction, thus to avoid
Description
oscillating handover.
Managed Object
Cell
0..48
(-24 dBm .. 24 dBm)
Step: 1
Unit
None
Default Value
Default Value
The level difference between two cells should not be too big or too small.
Configuration Reason
9 is a recommended value.
The lower the level difference. the more likely the handover will happen.
The parameter cannot be set too low, otherwise frequent oscillating
handovers will be caused.
Change Mode
Offline
Related features
5-469
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
MsTxPwrMax
3GPP Name
MS_TXPWR_MAX
3GPP Reference
Description
PBGT value.
Managed Object
Cell
0 .. 31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
5-470
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.7.3.1.16 The direction of neighbour cell for downlink rapid handover (NCellDir)
Full Name
Abbreviation
NCellDir
3GPP Name
None
3GPP Reference
None
This parameter indicates the direction of an adjacent cell to the current
Description
Managed Object
Cell
0: Any direction
1: Direction A
2: Direction B
Unit
None
Default Value
Any direction
Default Value
Configuration Reason
Adjustment Suggestion
5-471
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
NCellLayer
3GPP Name
None
3GPP Reference
None
This parameter provides the handover policies in multi-layer network
technology and dual-frequency network technology. Multi-layer radio
coverage can be formed in the same physical area.
The handover policies will not be detailed in this manual. In brief, limiting
the PBGT handover defined in the specifications at one layer can reduce
the number of handovers during the call, thus improving the system
reliability and communication quality. The policy of handover between
upper layers and lower layers mainly depends on the moving speed of
MS. An MS at higher moving speed will try to stay at the upper layers,
and an MS at lower moving speed will try to enter the lower layers. Only
in the case of PBGT handover and emergency, will the undefined cell of
the service area be considered as a candidate cell.
Same layer of the home cell: Adjacent cell and local cell are in the
same layer (PBGT handover possible); Upper layer of the home cell:
Adjacent cell is the upper layer of local cell ; Lower layer of the home
cell: Adjacent cell is the lower layer of local cell; Refer to the Appendix
Description
5-472
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: not defined
1: same level as that of the current cell
2: upper layer of this cell
Unit
None
Default Value
Default Value
In most cases configure the parameter to same level. For the cells that
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioCS
3GPP Name
REP_PRIORITY
3GPP Reference
5-473
SJ-20100524164252-017|2011-07-28 (R1.4)
XXXRprtOffsetCS) is preferred.
Managed Object
Cell
Low, High
Unit
None
Default Value
Low
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
5-474
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RxLevMin
3GPP Name
RXLEV_ACCESS_MIN
3GPP Reference
Description
Managed Object
Cell
5-475
SJ-20100524164252-017|2011-07-28 (R1.4)
0.. 63
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
2: -109 dBm .. -108 dBm;
...
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Value Range and Step
Step: 1
Unit
None
Default Value
15
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
ZGB-02-02-001 Basic Handover
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTrafficThs
5-476
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of the traffic in a target cell.
The PS handover decision is made based on this value. If the traffic
of this target cell is higher than the threshold value, there will be no
PS handover to this cell.
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
75
Default Value
The resources should be obtained and at the same time the congestion
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MacroMicroHoN_PS
3GPP Name
Internal
3GPP Reference
None
The handover from macro-cell to micro-cell is mainly applied to a two-layer
network. That is, the slowly moving MS hands over from the macro-cell
layer to the micro-cell layer. It judges whether the condition allows the
MS moving slowly performs PS handover to a cell one-layer lower than
the current cell. The condition is the level of adjacent cell exceeds the
threshold for N times. This parameter is to count the adjacent cell level
higher than the threshold when PS handover occurs between the macro
Description
Managed Object
Neighbor Cell
1..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-478
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MacroMicroHoThs_PS
3GPP Name
Internal
3GPP Reference
None
The handover from macro-cell to micro-cell is mainly applied to a twolayer network. That is, the slowly moving MS hands over from the macrocell layer to the micro-cell layer. It judges whether the condition allows
the MS moving slowly performs PS handover to a cell one-layer lower
than the current cell. The condition is the level of adjacent cell exceeds
the threshold for N times. This parameter is the threshold for cell signal
strength when PS handover occurs between the macro cell and the mico
Description
cell.
Managed Object
Neighbor Cell
0: <-110dBm
1: -110 ~-109 dBm
2: -109 ~ -108dBm
...
61: -50 ~ -49dBm
62: -49~ -48dBm
Unit
None
Default Value
20
Default Value
Usually, when other types of handover are not triggered, -90 dBm is
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-479
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetTrafficThs_PS
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the threshold of the traffic in a target cell. The PS
handover arbitration is made on based on this value. If the traffic of this
target cell is higher than the threshold value, there will be no PS handover
Description
to this cell.
Managed Object
Neighbor Cell
0..100
Step: 1
Unit
Default Value
70
Default Value
Configuration Reason
handover.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-480
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginPbgt_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. The PBGT_PS value of an adjacent cell is also one of the causes
for PS handover. The decision process is as follows: If the PBGT_PS
value of an adjacent cell is higher than the relevant threshold of this cell,
PS handover should be performed to find a more suitable cell. This parameterr is the threshold that must be used in the PS handover decision
Description
to hand over from an adjacent cell to the local cell through PBGT.
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
conducted.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
5-481
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Margin of RX handover
Abbreviation
HoMarginRxLev_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. In a handover caused by level changes, adjacent cells shall be
screened and sequenced. This parameter is the threshold that must be
used in the handover decision for a PS handover from the adjacent cell
Description
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
strength is conducted.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
5-482
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMarginRxQual_PS
3GPP Name
Internal
3GPP Reference
None
PS handover decision can be made at receiving the related average values. In handover caused by the quality, adjacent cells shall be screened
and sequenced. This parameter is the threshold that must be used in the
handover decision for a PS handover from the adjacent cell to the local
Description
Managed Object
Neighbor Cell
0: -24dB
1: -23dB
2: -22dB
...
46: 22 dB
47: 23dB
48: 24dB
Unit
dB
Default Value
30
Default Value
Configuration Reason
quality is conducted.
5-483
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Minimum RX level
Abbreviation
RxLevMin_PS
3GPP Name
Internal
3GPP Reference
None
This parameter defines the minimum receiving strength level (on PBCCH)
required by MS to handover to this cell. It is one of the parameters to
decide preferred cells during handover control. MS in a serving cell constantly monitors the signal strength on PBCCH of adjacent cells. Adjacent
cells with the receiving intensity level higher than the minimum value de-
Description
Managed Object
Neighbor Cell
0: <-110dBm
1: -110..-109 dBm
2: -109..-108dBm
61: -50..-49dBm
62: -49..-48dBm
5-484
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
dB
Default Value
15
Default Value
Configuration Reason
Adjustment Suggestion
used.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Is related cell
Abbreviation
IsRelatedCell_PS
3GPP Name
Internal
3GPP Reference
None
Only the cell related to the serving cell can be a candidate in rapid fading
PS handover. This is a parameter of an adjacent cell and is used to indi-
Description
Managed Object
Neighbor Cell
0: Yes
1: No
Unit
None
Default Value
5-485
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Handover priority
Abbreviation
HoPriority_PS
3GPP Name
Internal
3GPP Reference
None
Cell priorities should be taken into consideration when candidate cells are
sequenced during PS handover. Therefore, there are three decisive factors to sequence candidate cells: priority, traffic, and radio communication
environment. Priority and traffic have the most impact on cell sequencing.
If they lead to the same result, sequence cells by radio conditions. The
Description
Managed Object
Neighbor Cell
0..7 (0 means the lowest priority)
Step: 1
Unit
None
Default Value
5-486
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Max TX power of MS
Abbreviation
MsTxPwrMax_PS
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the highest power allowed by MS in an adjacent
Description
Managed Object
Neighbor Cell
0..31
Step: 1
Unit
dBm
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
used.
5-487
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
5-488
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Rese-
Modifying
Version
Parameter
lection
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
5-489
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Adjacent Cell Rese-
Modifying
Version
Parameter
lection
None
Modifying
Detail
None
Abbreviation
ReSelObjectId
3GPP Name
None
3GPP Reference
None
This parameter is a unique identification of adjacent cell reselection ob-
Description
ject.
Managed Object
Cell
1..64
Step: 1
Unit
None
Default Value
5-490
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioPS
3GPP Name
REP_PRIORITY
3GPP Reference
Description
5-491
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjacent cell in the frequency band different from that of the serving
cell must have the following features: BSIC of color code is valid.
Its measured field intensity ranks high among cells in the same
frequency band and is larger than or equal to the lower limit specified
by RprtThoPSXXX. Here, XXX represents the frequency band different
from that of serving cell.
Adjacent cells using other access technologies like UTRAN/FDD must
have the following features: The scrambling code of the cell is correct.
Its measured field intensity ranks high among cells with the same access
technologies and is larger than or equal to the lower limit specified
by XXXRprtThoPS. Here, XXX represents access technologies like
WCDMA/FDD.
For the priorities mentioned above, if there is vacancies for the cells with
the current priority, leave the vacancies to the adjacent cells with the next
priority. For the access technologies such as UTRAN/FDD, or frequency
band such as GSM 900 or RepPrioPS, cells with higher frequency bands
are preferred. For cells with same RepPrioPS, the cell with greater
sum of RprtThoPSXXX (or XXXRprtThoPS) and RprtOffsetPSXXX (or
XXXRprtOffsetPS) is preferred.
Managed Object
Cell
(Low, High)
Unit
None
Default Value
Low
Default Value
Configuration Reason
for an adjacent cell should be set high. Then the measurement results
will be reported every time. In most cases every adjacent cell is treated
the same. Cells with low priorities does not report frequently (when
ReportRatePS is set to 1), RepPrioPS is recommended to be set with
the default value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
5-492
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CCN support
Abbreviation
CCNSupport
3GPP Name
CCN_ACTIVE
3GPP Reference
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
5-493
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
cell; if the parameter is set to "No", CCN mode will not be used during
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNActive
[Cell]SIStatusInd
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
RelationDN
3GPP Name
None
3GPP Reference
None
A user can click <Select> to select cell or external cell in displayed interface, check <mutual configuration>, you can mutually configure it as
Description
Managed Object
Cell
5-494
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Fixed, No modification
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
SJ-20100524164252-017|2011-07-28 (R1.4)
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent
Modifying
Version
Parameter
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
5-496
SJ-20100524164252-017|2011-07-28 (R1.4)
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent
Modifying
Version
Parameter
Detail
None
Modifying
None
User Label
Abbreviation
UserLabel
5-497
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Value Range and
Step
This parameter means the UTRAN cell handover and reselection name for
users to identify.
Cell
Character string with the maximum length of 40
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent Cell
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoEcNoOffset3G
3GPP Name
FDD_Qmin_Offset
3GPP Reference
3GPP TS 45.008
5-498
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..49
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
adjacent cell;
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]FDDRepQntCS
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCPOffset3G
3GPP Name
TDD_Qoffset, FDD_Qoffset
3GPP Reference
3GPP TS 45.008
5-499
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
adjacent cell;
Adjustment Suggestion
a 3G adjacent cell.
Change Mode
Offline
Related features
Related Parameters
[Cell]FDDRepQntCS
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTrafficThs
3GPP Name
None
3GPP Reference
None
5-500
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
75
Default Value
The resources should be obtained and at the same time the congestion
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
S3GHoRSObjectId
3GPP Name
None
3GPP Reference
None
5-501
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioCS
3GPP Name
None
3GPP Reference
None
5-502
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
Low, High
Unit
None
Default Value
Low
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
5-503
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioPS
3GPP Name
REP_PRIORITY
3GPP Reference
Description
5-504
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
(Low, High)
Unit
None
Default Value
Low
Default Value
Configuration Reason
for an adjacent cell should be set high. Then the measurement results
will be reported every time. In most cases every adjacent cell is treated
the same. Cells with low priorities does not report frequently (when
ReportRatePS is set to 1), RepPrioPS is recommended to be set with
the default value.
Change Mode
Offline
Related features
None
Related Parameters
[Cell]ReportRatePS
The parameter RepPrioPS configures every adjacent cell; the parameter
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CCN support
Abbreviation
CCNSupport
3GPP Name
CCN_ACTIVE
3GPP Reference
5-505
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
cell; if the parameter is set to "No", CCN mode will not be used during
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNActive
[Cell]SIStatusInd
Relationship
Related Interfaces
5-506
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
RelationDN
3GPP Name
None
3GPP Reference
None
A user can click <Select> to select cell or external cell in displayed interface, check <mutual configuration>, you can mutually configure it as
Description
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Fixed, No modification
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-507
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTraThs_PS
3GPP Name
Internal
3GPP Reference
None
This parameter indicates the service traffic threshold for 3G target cells
when 3G PS handover is being conducted. The PS handover arbitration
is made on based on this value. If the traffic of this target cell is higher
Description
Managed Object
Step: 1
Unit
Default Value
70
Default Value
Configuration Reason
handover.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-508
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
EcNo offset
Abbreviation
HoEcNoOffset3G_PS
3GPP Name
Internal
3GPP Reference
None
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for uplink/downlink of UTRAN adjacent cells. It also controls the priority of a UE
to handover to different adjacent cells. This parameter is a must for 2/3G
Description
PS handover.
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-509
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RSCP offset
Abbreviation
HoRSCPOffset3G_PS
3GPP Name
Internal
3GPP Reference
None
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for uplink/downlink of UTRAN adjacent cells. It also controls the priority of a UE
to handover to different adjacent cells. This parameter is a must for 2/3G
Description
PS handover.
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-510
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
5-511
SJ-20100524164252-017|2011-07-28 (R1.4)
Modifying
Version
Parameter
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
5-512
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent
Modifying
Version
Parameter
None
Modifying
Detail
None
Abbreviation
HoEcNoOffset3G
3GPP Name
FDD_Qmin_Offset
3GPP Reference
3GPP TS 45.008
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent
cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
Description
Managed Object
Cell
0..49
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
adjacent cell;
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]FDDRepQntCS
5-513
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTrafficThs
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of the traffic in a target cell.
The PS handover decision is made based on this value. If the traffic
of this target cell is higher than the threshold value, there will be no
PS handover to this cell.
Description
Managed Object
Cell
0..100
Step: 1
Unit
None
Default Value
75
Default Value
The resources should be obtained and at the same time the congestion
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
5-514
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRSCPOffset3G
3GPP Name
TDD_Qoffset, FDD_Qoffset
3GPP Reference
3GPP TS 45.008
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent
cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for
uplink/downlink of UTRAN adjacent cells. It also controls the priority of a
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
adjacent cell;
If this parameter is set too high, it is difficult to trigger a handover to
a 3G adjacent cell.
Change Mode
Offline
Related features
Related Parameters
[Cell]FDDRepQntCS
Relationship
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
S3GHoObjectId
3GPP Name
None
3GPP Reference
None
This parameter is a unique identification of UTRAN adjacent cell handover
Description
object.
Managed Object
Cell
1..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-516
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RepPrioCS
3GPP Name
REP_PRIORITY
3GPP Reference
Description
permitted NCC but invalid BCC, or adjacent cell with other access
5-517
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
Low, High
Unit
None
Default Value
Low
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
RelationDN
5-518
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
A user can click <Select> to select cell or external cell in displayed interface, check <mutual configuration>, you can mutually configure it as
Description
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Fixed, No modification
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TargetCellTraThs_PS
3GPP Name
Internal
5-519
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the service traffic threshold for 3G target cells
when 3G PS handover is being conducted. The PS handover arbitration
is made on based on this value. If the traffic of this target cell is higher
Description
Managed Object
Step: 1
Unit
Default Value
70
Default Value
Configuration Reason
handover.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
EcNo offset
Abbreviation
HoEcNoOffset3G_PS
3GPP Name
Internal
3GPP Reference
None
5-520
SJ-20100524164252-017|2011-07-28 (R1.4)
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for uplink/downlink of UTRAN adjacent cells. It also controls the priority of a UE
to handover to different adjacent cells. This parameter is a must for 2/3G
Description
PS handover.
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
RSCP offset
Abbreviation
HoRSCPOffset3G_PS
3GPP Name
Internal
3GPP Reference
None
5-521
SJ-20100524164252-017|2011-07-28 (R1.4)
After a handover from GSM to UTRAN is triggered, the UTRAN adjacent cell meets the minimum requirement for normal UE communication.
This parameter is a prerequisite to ensure enough field intensity for uplink/downlink of UTRAN adjacent cells. It also controls the priority of a UE
to handover to different adjacent cells. This parameter is a must for 2/3G
Description
PS handover.
Managed Object
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
5-522
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
This parameter means the site ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent
Modifying
Version
Parameter
Cell Reselection
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
5-523
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->UTRAN Adjacent
Modifying
Version
Parameter
Detail
Cell Reselection
None
Modifying
None
5-524
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
S3GrsObjectId
3GPP Name
None
3GPP Reference
None
This parameter is a unique identification of UTRAN adjacent cell reselec-
Description
tion object.
Managed Object
Cell
1..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-525
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
RepPrioPS
3GPP Name
REP_PRIORITY
3GPP Reference
Description
XXXRprtOffsetPS) is preferred.
Managed Object
Cell
(Low, High)
Unit
None
Default Value
Low
Default Value
Configuration Reason
5-526
SJ-20100524164252-017|2011-07-28 (R1.4)
For the last priority setting of the measurement report from adjacent
cells, if the cells with higher priorities are expected to report, RepPrioPS
Configuration Rule and
Adjustment Suggestion
for an adjacent cell should be set high. Then the measurement results
will be reported every time. In most cases every adjacent cell is treated
the same. Cells with low priorities does not report frequently (when
ReportRatePS is set to 1), RepPrioPS is recommended to be set with
the default value.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CCN support
Abbreviation
CCNSupport
3GPP Name
CCN_ACTIVE
3GPP Reference
5-527
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
cell; if the parameter is set to "No", CCN mode will not be used during
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]NACCSupport
[Cell]CCNActive
[Cell]SIStatusInd
Relationship
Related Interfaces
5-528
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Related Cell DN
Abbreviation
RelationDN
3GPP Name
None
3GPP Reference
None
A user can click <Select> to select cell or external cell in displayed interface, check <mutual configuration>, you can mutually configure it as
Description
Managed Object
Cell
None
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Fixed, No modification
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
5-529
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
5-530
SJ-20100524164252-017|2011-07-28 (R1.4)
Modifying
Version
Parameter
System
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
5-531
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->Frequency Hopping
Modifying
Version
Parameter
System
None
Modifying
Detail
None
Frequency hopping ID
Abbreviation
FhsId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1..255
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-532
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HSN
3GPP Name
3GPP Reference
3GPP TS 44.018
According to GSM 05.02 Frequency Hoping Algorithm, MAI is a function
of TDMA Frame number (FN), Hoping Sequence Number (HSN) and
Mobile Allocation Index Offset (MAIO). HSN determines the operation
track of frequencies during the frequency hopping process. Using
different HSN for cells having same MA can avoid frequency utilization
conflict between adjacent cells during the frequency hopping process.
Different timeslots can share the same group of MA and the
corresponding HSN. When HSN = 0, it is a special frequency hopping
(that is, circular frequency hopping).
For the cells close to each other with the same MA, different HSNs can
ensure that there is no conflict of frequency utilization during the FH
process.
For example, if HSN [(BCC6) +1, (BCC6) +6], then each cell may
use any of the 6 HSNs. The remaining 0 and 49..63 are used in other
Description
Managed Object
Cell
0..63
Step: 1
Unit
None
Default Value
None
5-533
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
None
Adjustment Suggestion
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
FreqHopMode
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1: Baseband Frequency Hopping
2: RF Frequency Hopping
Unit
None
Default Value
2: RF Frequency Hopping
Default Value
Configuration Reason
None
5-534
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Hopping group ID
Abbreviation
BhGroupId
3GPP Name
None
3GPP Reference
None
Description
This parameter indicates the group ID for base band frequency group.
Managed Object
Cell
0..255
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
5-535
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
MaFreqNum
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1..64
Unit
None
Default Value
None
Default Value
Configuration Reason
None
Change Mode
Offline
ZGO-04-03-001 Synthesized Frequency Hopping
Related features
Related Parameters
None
5-536
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Site ID
Abbreviation
SITEID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1 ~ 1536
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
5-537
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->PS Handover Con-
Modifying
Version
Parameter
trol->Handover Pretreatment
None
Modifying
Detail
None
BTS ID
Abbreviation
BtsId
3GPP Name
None
3GPP Reference
None
This parameter means the BTS ID. It cannot be modified.
Description
Managed Object
Cell
1 ~ 24
The following lists the maximum number of BtsIds of each site type.
l
OB06 3
BS20 3
BS21 3
BS21V20 3
BS30 3
BS30V12 3
B8112 6
M8202 6
M8206 6
B8018 6
S8001 1
SDR 24
Unit
None
5-538
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Sorted by practice
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->PS Handover Con-
Modifying
Version
Parameter
trol->Handover Pretreatment
None
Modifying
Detail
None
PS handover control ID
Abbreviation
PsHocId
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1~2
Unit
None
Default Value
Default Value
Configuration Reason
None
None
5-539
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->Site Config->Site ID->Cell ID->PS Handover Con-
Modifying
Version
Parameter
trol->Handover Pretreatment
None
Modifying
Detail
None
Abbreviation
ZeroAllowed
3GPP Name
None
3GPP Reference
None
According to the GSM Specifications, the MS can only report the
measurement data of six adjacent cells with the strongest signal
strength. Therefore, the measurement results of adjacent cells recorded
by BSC may be discontinuous, and the measurement data of the missing
cells shall thus be recorded as 0 (that is, less than -110dBm).
To avoid the negative impact of 0 on averaging, suppose occasional 0 is
allowed and is not used in averaging, but excessive occurrences of 0
indicate that the signals of this adjacent cell are too poor. If the number
of zeroes in used for average calculation exceeds Number of zero
allowed in AV, then measurement average equals to sum of reported
values divided by Neighboring cell.
To be specific, during averaging, if the count of 0s in the sampling count
exceeds "ZeroAllowed", these sampling values are hardly reliable, and
the measurement average will be the sum of the reported values divided
by NCellWindow. If the count of 0s in the reported values does not
Description
exceed "ZeroAllowed", these sampling values are much reliable and the
5-540
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevWindow
3GPP Name
N1..N8, P1..P8
3GPP Reference
5-541
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
12
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-542
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoDlLevWindow
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-543
SJ-20100524164252-017|2011-07-28 (R1.4)
Uplink quality
Abbreviation
HoUlQualWindow
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
12
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-544
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Downlink quality
Abbreviation
HoDlQualWindow
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-545
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Distance
Abbreviation
DistanceWindow
3GPP Name
None
3GPP Reference
Description
used in averaging.
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Configuration of the value is in accordance with the general condition. If
the value is too small, it is difficult to select the adjacent cell as the target
Adjustment Suggestion
cell. The larger the value is, it is more difficult to select the adjacent
cell as the target cell.
Change Mode
Offline
Related features
None
Related Parameters
None
5-546
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Neighboring cell
Abbreviation
NCellWindow
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Configuration of the value is in accordance with the general condition. If
the value is too small, it is difficult to select the adjacent cell as the target
Adjustment Suggestion
cell. The larger the value is, it is more difficult to select the adjacent
cell as the target cell.
5-547
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevThs
3GPP Name
None
3GPP Reference
Description
5-548
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
18
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlLevN
3GPP Name
None
5-549
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-550
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
HoUlLevP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-551
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevThs
3GPP Name
None
3GPP Reference
Description
of the cell.
Managed Object
Cell
0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
5-552
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
18
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevN
3GPP Name
None
3GPP Reference
5-553
SJ-20100524164252-017|2011-07-28 (R1.4)
of the cell.
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-554
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlLevP
3GPP Name
None
3GPP Reference
Description
of the cell.
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
5-555
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualThs
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
0..31
Step: 1
Unit
None
Default Value
15
5-556
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualN
3GPP Name
None
3GPP Reference
Description
5-557
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoUlQualP
3GPP Name
None
3GPP Reference
5-558
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-559
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
HoDlQualThs
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
0..31
Step: 1
Unit
None
Default Value
15
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-560
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoDlQualP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
5-562
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoUlLevThs
3GPP Name
None
3GPP Reference
Description
5-563
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Step: 1
Unit
None
Default Value
35
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-564
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
IntraHoUlLevN
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
5-565
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoUlLevP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
5-566
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoDlLevThs
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
5-567
SJ-20100524164252-017|2011-07-28 (R1.4)
0..63;
0: < -110 dBm;
1: -110 dBm .. -109 dBm;
......
62: -49 dBm .. -48 dBm;
63: > -48 dBm
Value Range and Step
Step: 1
Unit
None
Default Value
40
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
IntraHoDlLevN
3GPP Name
None
3GPP Reference
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-569
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
IntraHoDlLevP
3GPP Name
None
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
5-570
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RapidHoThs
3GPP Name
None
3GPP Reference
None
During fast fading handover, some parameters shall be used.
"RapidHoThs" is a signal strength threshold. If the measured signal
strength values of a call are consecutively lower than this threshold, it
meets the condition for rapid attenuation handover. Candidate cells are
special associated cells among the adjacent cells.
"RapidHoThs" can be set as 15 (that is, -96dBm ~ -95dBm) by default,
the same as the level threshold of ordinary handover. "RapidHoN" is a
counter value. That is, the minimum times that the measured values of
Description
the signal strength of the call are consecutively lower than the threshold.
Managed Object
Cell
0.0.62
Step: 1
Unit
None
Default Value
15
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Rapid handover is characterized by fast speed, so the handover
threshold should not be too high. The MS will move to the area with high
Adjustment Suggestion
cell level soon. N value cannot be too large, otherwise the timeliness of
handover judgement will be influenced.
Change Mode
Offline
5-571
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
RapidHoN
3GPP Name
None
3GPP Reference
None
During fast fading handover, some parameters shall be used.
"RapidHoThs" is a signal strength threshold. If the measured signal
strength values of a call are consecutively lower than this threshold, it
meets the condition for rapid attenuation handover. Candidate cells are
special associated cells among the adjacent cells.
"RapidHoThs" can be set as 15 (that is, -96dBm ~ -95dBm) by default,
the same as the level threshold of ordinary handover. "RapidHoN" is a
counter value. That is, the minimum times that the measured values of
Description
the signal strength of the call are consecutively lower than the threshold.
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
5-572
SJ-20100524164252-017|2011-07-28 (R1.4)
threshold should not be too high. The MS will move to the area with high
Adjustment Suggestion
cell level soon. N value cannot be too large, otherwise the timeliness of
handover judgement will be influenced.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoThs
3GPP Name
None
3GPP Reference
Description
MS moving speed.
5-573
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..63
0: < -110 dBm;
1: -110dBm..-109dBm;
...
62: -49 dBm .. -48 dBm;
63: >-48dBm
Step: 1
Unit
None
Default Value
20
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
The higher the threshold is, it is more likely to perform macro-micro
Adjustment Suggestion
is related to this cell size and the standard used in measuring the MS
moving speed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
MacroMicroHoN
3GPP Name
None
5-574
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
Description
MS moving speed.
Managed Object
Cell
1..255
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
The higher the threshold is, it is more likely to perform macro-micro
Adjustment Suggestion
is related to this cell size and the standard used in measuring the MS
moving speed.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-575
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
DistanceN
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to GSM specifications, arbitration for SDCCH can be
conducted after a series of average values of uplink and downlink signal
strength are obtained.
The distance between MS and BTS can impact the handover. The
arbitration process is as follows: For the latest N average values of TA
(distance), if P of the N values are higher than the relevant threshold
value, perform a handover. The handover happens due to MS being out
of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 3.
If the value is set low, there will few samplings and wrong arbitration
might be made.
Adjustment Suggestion
If the value is set high, arbitration for handover needs more time and
call drop will happen.
Change Mode
Offline
Related features
Related Parameters
[BSC]ShoEnable
[Cell]DistanceP
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
5-576
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DistanceP
3GPP Name
N1..N8, P1..P8
3GPP Reference
3GPP TS 45.008
According to GSM specifications, arbitration for SDCCH can be
conducted after a series of average values of uplink and downlink signal
strength are obtained.
The distance between MS and BTS can impact the handover. The
arbitration process is as follows: For the latest N average values of TA
(distance), if P of the N values are higher than the relevant threshold
value, perform a handover. The handover happens due to MS being out
of the cell serving range.
The parameter DistanceN defines the relevant N value, and parameter
Description
Managed Object
Cell
1..20
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
this parameter 2.
If the value is set low, it will be easy to meet the arbitration conditions
Adjustment Suggestion
If the value is set high, it will be difficult to meet the arbitration conditions
and handover will not happen frequently.
Change Mode
Offline
Related features
5-577
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[BSC]ShoEnable
[Cell]DistanceN
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
PBGTHoN
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
5-578
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PBGTHoP
3GPP Name
N1..N8, P1..P8
3GPP Reference
Description
Managed Object
Cell
1..31
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
5-579
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DistanceThs
3GPP Name
Internal
3GPP Reference
None
The distance from MS to BTS is also one of the causes for handover.
The decision process is as follows: For the latest N average values of
TA (distance), if P of the N values rises above relevant threshold value,
perform handover. The handover is due to MS being out of the serving
Description
Managed Object
Cell
Common cell: 0 ..0.63; Extended cell: 0..0.219
Step: 1
Unit
None
Default Value
60
Default Value
When the TA reaches the maximum TA that the cell supports, handover
Configuration Reason
is initiated.
5-580
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoMinInterval
3GPP Name
None
3GPP Reference
None
During PS handover, the system uses this parameter to restrict frequent
inter-cell handover, and guarantee the communication quality and
system performance, so as to prevent the MS from performing handover
to other cells soon after it handovers to the cell (usually, such a case
occurs at the boundary regions between two cells).
Inter-cell handover takes place when the timer exceeds the defined
interval value from the last inter-cell handover of MS. This parameter
only affects the inter-cell handover, but not common intra-cell or inter-cell
concentric handover. In addition, micro-cell has its own handover policy,
so this parameter is only effective for macro-cell layer and its above layer.
For macro-cell, the default value can be 5; for micro-cell, the default
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..31
Step: 1
Unit
Default Value
Default Value
Configuration Reason
The value is to keep the MS from handover to the original cell. The
Adjustment Suggestion
longer the time is, the longer is the handover to the original cell.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LayerPriority
3GPP Name
None
3GPP Reference
None
5-582
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
1..3
Step: 1
Unit
None
Default Value
Default Value
The default value ensures to trigger this kind of handover rapidly and
Configuration Reason
accurately.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-583
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.9.3.4 Handover to same layer other band neighbor cell for PBGT permitted
(PbgtHoLayer_0)
Full Name
Handover to same layer other band neighbor cell for PBGT permitted
Abbreviation
PbgtHoLayer_0
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
0: No;
Value Range and Step
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
5-584
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
5.9.3.5 Handover to neighbor cell with no layer relation for PBGT permitted
(PbgtHoLayer_1)
Full Name
Abbreviation
PbgtHoLayer_1
3GPP Name
None
3GPP Reference
None
This parameter describes whether it is allowed to perform PBGT handover
Description
Managed Object
Cell
0No
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-585
SJ-20100524164252-017|2011-07-28 (R1.4)
5.9.3.6 Handover to upper layer neighbor cell for PBGT permitted (PbgtHoLayer_2)
Full Name
Abbreviation
PbgtHoLayer_2
3GPP Name
None
3GPP Reference
None
This parameter describes whether the PBGT handover to the upper layer
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5.9.3.7 Handover to under layer neighbor cell for PBGT permitted (PbgtHoLayer_3)
Full Name
5-586
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PbgtHoLayer_3
3GPP Name
None
3GPP Reference
None
This parameter describes whether the PBGT handover to the lower layer
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Synchronism
Abbreviation
HoPatternInd_0
3GPP Name
None
5-587
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the configuration that whether the
synchronization handover is allowed in this cell.
If the time advance of the destination cell BSC obtained is equal to that of
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
intra-cell handover.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Asynchronism
Abbreviation
HoPatternInd_1
3GPP Name
None
3GPP Reference
None
5-588
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Pre-synchronism
Abbreviation
HoPatternInd_3
3GPP Name
None
3GPP Reference
None
5-589
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_1
5-590
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to allow intra-cell handover due to
uplink interference.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_2
3GPP Name
None
3GPP Reference
None
5-591
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_4
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
5-592
SJ-20100524164252-017|2011-07-28 (R1.4)
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_3
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
5-593
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_5
3GPP Name
None
3GPP Reference
None
This parameter indicates whether to allow automatic handover based
on traffic.
Description
Managed Object
Cell
0: No;
1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoControl_6
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
5-595
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related
Parameters
None
Relationship
None
Related Interfaces
None
Impact on
Equipment
Impact on service
Negotiation With
CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter
Modifying Version
None
Parameter
Modifying Detail
None
Abbreviation
HoControl_7
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Cell
Yes/No
Unit
None
Default Value
No
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
5-596
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related
Parameters
None
Relationship
None
Related Interfaces
None
Impact on
Equipment
Impact on service
Negotiation With
CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter
Modifying Version
None
Parameter
Modifying Detail
None
Abbreviation
QueInHo
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether it is allowed to queue up to wait for
Description
Managed Object
Cell
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Many target cells are available for handover and the interval of handover
Configuration Reason
5-597
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PreeptInHo
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether it is allowed to preempt the channel
Description
Managed Object
Cell
1: Yes; 0: No
Unit
Cell
Default Value
No
Default Value
Configuration Reason
The value can be enabled if you wish the high-priority user to obtain
Adjustment Suggestion
Change Mode
Offline
5-598
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoFailPenalTime
3GPP Name
None
3GPP Reference
None
This parameter indicates the penalty time for the target cell if the MS fails
to handover to the target cell. During the penalty time, the priority of inter-cell handover within BSC is reduced. This parameter determines the
Description
penalty duration.
Managed Object
Cell
1..255
Step: 1
Unit
Default Value
Default Value
Configuration Reason
cell.
The longer the time is set, the longer is the penalty on the cell, the longer
Adjustment Suggestion
Change Mode
Offline
Related features
None
5-599
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
TrafficHoLayrCtl
3GPP Name
None
3GPP Reference
None
This is a layer selecting parameter on traffic handover. This parameter,
together with frequency control value for handover on traffic, decides the
adjacent cells frequency band and layer selected during traffic handover.
When traffic handover condition is satisfied, as for the layer relation, four
choices are available for call selection and candidate cell arrangement.
This parameter decides which choice shall be selected. When
traffic-based handover control is implemented in traffic process, this
parameter takes priority over that of adjacent cells.
The values are as follows:
0: N, Not defined;
1: SAME, Adjacent cell and this cell are in the same layer;
2: UPPER, Adjacent cell is the upper layer of this cell;
Description
Managed Object
Cell
0: N, Not defined;
1: SAME, Adjacent cell and this cell are in the same layer;
2: UPPER, Adjacent cell is the upper layer of this cell;
5-600
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrafficHoFreqCtl
3GPP Name
None
3GPP Reference
None
This parameter defines the control value of layer for traffic handover, i.e.
which frequency band shall be handed over to.
Basic GSM900 frequency band P-GSM (ARFCN = 1..124)
Extended GSM900 frequency band E-GSM (ARFCN = 0..124,
975..1023)
DCS1800 frequency band DCS1800 (ARFCN = 512..885)
PCS1900 frequency band PCS1900 (ARFCN = 512..810)
Description
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0: GSM900
1: EXT900
2: DCS1800
4: PCS1900
7: GSM850
Unit
None
Default Value
GSM900
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
None
Parameter Modifying
Detail
None
Abbreviation
TrafficThs
3GPP Name
None
3GPP Reference
None
5-602
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
Cell
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TrafficLevThs
3GPP Name
Internal
5-603
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter is used for traffic handover during PS services. If the adjacent cell' s level is higher than this threshold (that is, RxLevelNcell-DwlinkLevel>=TrafficLevThs), and the adjacent cell's level satisfies its minimum
Description
Managed Object
Cell
0..48
Step: 1
Unit
None
Default Value
24
Default Value
Configuration Reason
If the target cell's level is not lower than the serving cell, traffic handover
can be performed to balance traffic. If this threshold is too high, it is
difficult to select a user for outgoing handover.
When the outgoing handover is prefered to be performed on the cell
with large traffic, the value should be adjusted as small. Otherwise,
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-604
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
PenaltyLevOffset
3GPP Name
Internal
3GPP Reference
None
When the MS is performing PS services, if the target cell is in the penalty
for handover failure, an offset is made on the downlink level of the target
Description
cell.
Managed Object
Cell
0..63
Step: 1
Unit
dB
Default Value
15
Default Value
Generally, the cell in penalty can be no longer ordered in the front of the
Configuration Reason
handover list if other adjacent cells with good signal are available.
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
QOffSetUl
3GPP Name
Internal
3GPP Reference
None
Value range 0..6 indicates the quality offset range is -3..3.
The MS is tuned to the predefined interference area due to the uplink
quality is poor and level is high when the MS performs PS services.
If AvRxQualUL(s)<InterfFQSS(s), uplink interference handover can be
performed.
Where, AvRxQualUL(s) is the average bit error rate (MEAN_BEP),
InterfFQSS(s) is the bit error rate threshold calculated by the average
uplink level AvRxLevUL(s). The calculation formula is as follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
XOffset and YOffset respectively represent the uplink interference level
Description
Managed Object
Cell
0..6
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
environment.
The larger the value is, the lower is the quality tolerability under the
corresponding level, and it is easier to initiate quality handover which
should be adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SOffSetUl
3GPP Name
Internal
3GPP Reference
None
Value range 0..20 indicates the quality offset range is -10..10 dB.
The MS is tuned to the predefined interference area due to the uplink
quality is poor and level is high when the MS performs PS services.
If AvRxQualUL(s) < InterfFQSS(s), uplink interference handover can be
performed.
Where, AvRxQualUL(s) is the average bit error rate (MEAN_BEP),
InterfFQSS(s) is the bit error rate threshold calculated by the average
uplink level AvRxLevUL(s). The calculation formula is as follows:
InterfFQSS(s)=0 if AvRxLevUL(s) <XOffset +20
=YOffset+9 if XOffset+20 <= AvRxLevUL(s) <XOffset +30
=YOffset+9 if XOffset+20 <= AvRxLevUL(s) <XOffset +30
=YOffset+5 if XOffset+40 <= AvRxLevUL(s)
XOffset and YOffset respectively represent the uplink interference level
Description
Managed Object
Cell
0..20
Step: 1
Unit
dB
Default Value
15
Default Value
Configuration Reason
environment.
The larger the value is, the lower the requirement on quality handover is,
and it is easier to initiate quality handover which should be adjusted in
accordance with the actual network situation.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
5-607
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
QOffSetDl
3GPP Name
Internal
3GPP Reference
None
Value range 0..6 indicates the quality offset range is -3..3.
The MS is tuned to the predefined interference area due to the uplink
quality is poor and level is high when the MS performs PS services.
If AvRxQualUL(s)<InterfFQSS(s), downlink interference handover can
be performed.
Where, AvRxQualUL(s) is the average downlink bit error rate
(MEAN_BEP), InterfFQSS(s) is the bit error rate threshold calculated by
the average downlink level AvRxLevUL(s). The calculation formula is
as follows:
InterfFQSS(s)=0 if AvRxLevUL(s)<XOffset+20
=YOffset+9 if XOffset+20<=AvRxLevUL(s)<XOffset+30
=YOffset+7 if XOffset+30<=AvRxLevDL(s)<XOffset+40
=YOffset+5 if XOffset+40<=AvRxLevUL(s)
XOffset and YOffset respectively represent the downlink interference
Description
Managed Object
Cell
0..6
Step: 1
Unit
None
5-608
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
environment.
The larger the value is, the lower is the quality tolerability under the
corresponding level, and it is easier to initiate quality handover which
should be adjusted in accordance with the actual network situation.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SOffSetDl
3GPP Name
Internal
3GPP Reference
None
Value range 0..20 indicates the quality offset range is -10..10 dB.
The MS is tuned to the predefined interference area due to the uplink
quality is poor and level is high when the MS performs PS services.
If AvRxQualUL(s)<InterfFQSS(s), downlink interference handover can
be performed.
Where, AvRxQualUL(s) is the average downlink bit error rate
(MEAN_BEP), InterfFQSS(s) is the bit error rate threshold calculated by
the average downlink level AvRxLevUL(s). The calculation formula is
Description
as follows:
5-609
SJ-20100524164252-017|2011-07-28 (R1.4)
Cell
0..20
Step: 1
Unit
dB
Default Value
10
Default Value
Configuration Reason
environment.
The larger the value is, the lower the requirement on quality handover is,
and it is easier to initiate quality handover which should be adjusted in
accordance with the actual network situation.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
TMaxiHo
5-610
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Internal
3GPP Reference
None
PSWhen the MS performs PS services, the timer TMaxIHo starts after
the MS performs interference handover in the cell for the first time. If handover occurs again before the counter ecxpires, the previous handover
is considered to have no influence on interference, the counter HoCount
increases by 1 and the counter TMaxIHo restarts. If handover occurs after the counter expires, the previous handover is considered valid, clear
the counter IHoCount to 0 and restart the counter TMaxIHo.If the counter
reaches MaxIHo, it indicates that no more attempt is needed, and the in-
Description
Managed Object
Cell
1..100
Step: 1
Unit
Default Value
Default Value
Configuration Reason
as too frequent.
If the default value is set as too small, the invalid handover is easily to
Adjustment Suggestion
If the value is set as too large, the valid handover is easily to be judged
as invalid handover.
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-611
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MaxiHo
3GPP Name
Internal
3GPP Reference
None
PSWhen the MS performs PS services, the timer TMaxIHo starts after
the MS performs interference handover in the cell for the first time. If
handover occurs again before the counter expires, the previous handover
is considered to have no influence on interference, the counter HoCount
increases by 1 and the counter TMaxIHo restarts. If handover occurs after
the counter expires, the previous handover is considered valid, clear the
counter IHoCount to 0 and restart the counter TMaxIHo. If the counter
reaches MaxIHo, it indicates that no more attempt is needed, and the
Description
Managed Object
Cell
1..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
as too frequent.
If the value is too small, the handover is easily to be judged as invalid
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-02-02-016 PS Handover
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
5-612
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SUBCELLHO
3GPP Name
Internal
3GPP Reference
None
This parameter indicates which inter-subcell handover mode is supported.
Three handover modes are optional. Mode 1: If the MS is in subcell 2
of the source cell before the handover, it is handed over to subcell 2 of
the target cell in preference. If the MS is in subcell 1 of the source cell
before the handover, it can only be handed over to subcell 1 of the target
cell. Mode 2: No matter which subcell the MS is camped on before the
handover, it can only be handed over to subcell 1 of the target cell. Mode
3: Whether the MS can be directly handed over to subcell 2 depends on
the level measurement of the target cell. If the path loss of the target cell
is less than PathLossMin configured for the target cell, the MS is handed
over to subcell 2 in preference. Or else, the MS can only be handed over
Description
Managed Object
Site
Unit
None
Default Value
Yes
Default Value
In most cases, subcells of the same site have almost the same coverage
Configuration Reason
5-613
SJ-20100524164252-017|2011-07-28 (R1.4)
Set the parameter value to "Yes" when the subcells of the site have
similar coverage radius to allow the handover from subcell 2 of the
source cell to subcell 2 of the target cell. If the coverage radius of
the target subcell 2 is greatly different from that of the source subcell
2, especially in the case of SDR multi-antenna transmission, set the
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
5-614
SJ-20100524164252-017|2011-07-28 (R1.4)
Chapter 6
User Label
Abbreviation
UserLabel
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
6-1
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->System Control Parameters->Operation Control
Parameters
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6.1.2 BSC ID
Full Name
BSC ID
Abbreviation
BSCID
3GPP Name
None
3GPP Reference
None
Description
Managed Object
Value Range and
Step
BSC ID cannot be modified. By default, the value is the same with that
of subnetwork ID.
BSC
1 ~ 4095
Unit
None
Default Value
None
Default Value
Configuration
Reason
None
Configuration Rule
and Adjustment
Suggestion
None
Change Mode
Offline
Related features
None
6-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
None
Impact on service
None
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
ID->BSC Function ID->System Control Parameters->Operation Control
Parameters
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
AssQueEnable
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow an assignment to queue when
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
6-3
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
[Cell]QueueInd_0
[BSC]QueueIndAss
This parameter is enabled only when the switches in cell parameters,
Relationship
eMLPP parameters, and BSC system control parameters are all set
to Yes.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InDrEnable
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow an assignment to request a
channel from other cells in the BSC when the assignment fails to request
Description
a channel.
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
6-4
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]DrInd_0
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OutDrEnable
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow an assignment to request a
channel from the cells outside the BSC when the assignment fails to re-
Description
quest a channel.
Managed Object
BSC
1: Yes
0: No
Unit
None
6-5
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
0: No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]DrInd_1
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
YES
None
Parameter Modifying
Detail
None
Abbreviation
AssPreEmpt
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow an assignment to forcedly release a channel occupied by a low-priority user when the assignment fails
Description
to request a channel.
Managed Object
BSC
6-6
SJ-20100524164252-017|2011-07-28 (R1.4)
1: Yes
Value Range and Step
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[Cell]PreemptionInd_0
[BSC]PreemptionIndAss
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoIntraEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
6-7
SJ-20100524164252-017|2011-07-28 (R1.4)
1: Yes
Value Range and Step
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Adjustment Suggestion
not controlled.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoInterEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
1: Yes
6-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoOutEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Adjustment Suggestion
not controlled.
6-9
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ShoEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]HoControl_0
6-10
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
A cell can support SDCCH handover only when both the BSC-level
switch and the cell-level switch are enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
TfHoEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
6-11
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ThHoEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-12
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoQueEnable
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGB-03-01-003 Queuing
Related Parameters
[Cell]QueueInd_1
[BSC]QueueIndHo
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
YES
6-13
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoPreEmpt
3GPP Name
None
3GPP Reference
None
This parameter decides whether to allow forced releases during han-
Description
dovers.
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
1: Yes
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
[Cell]PreemptionInd_1
[BSC]PreemptionIndHo
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-14
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoA
3GPP Name
None
3GPP Reference
None
This parameter indicates the handover decision algorithm.
0: DZD handover algorithm 1
1: DZD handover algorithm 2
...
9: DZD handover algorithm 10
Description
10: Reserved
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-15
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoAck
3GPP Name
None
3GPP Reference
None
This parameter decides whether the MSC needs to give response
messages during outgoing handovers of the current BSC.
For inter-BSC handovers, if this parameter is set to 1, the HANDOVER
REQUIRED message includes the Response Request information
element.
When the MSC fails to carry out a handover, it will feed back the
Response Request Reject message to the BSC. If this parameter is set
to 0, the MSC will not feed back the Response Request Reject message
to the BSC when it fails to carry out a handover.
When the timer T7 expires, the BSC will regard that the handover
Description
attempt fails.
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
0: No
Default Value
The MSC are not required to give responses, but timeout action will
Configuration Reason
be carried out.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
6-16
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
YES
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Force FACCH
Abbreviation
FacchOnly
3GPP Name
None
3GPP Reference
None
This parameter decides whether the assignment uses the TCH/F as the
first priority when requesting a channel. If the parameter is set to Yes, the
settings of the cell parameters FacchCallInd_0, FacchCallInd_1, FacchCallInd_2, and FacchCallInd_3 will not be used. Instead, the TCH/F will
Description
be used first.
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]FacchCallInd_0/1/2/3
6-17
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoTrigger
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of handover times, which is only for
Description
internal use.
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
6-18
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoCauseInd
3GPP Name
None
3GPP Reference
None
This parameter indicates the cause of an initiated handover, which is only
Description
Managed Object
BSC
0..7
0: No handover;
1..2 : Intra-cell handover;
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
6-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LAC
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the location area ID of the
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
6-20
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CI
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the ID of the local cell in
Description
handovers.
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-21
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OutCellNum
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the number of the external
Description
Managed Object
BSC
0..3
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
6-22
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OutLAC1
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the location area ID 1 of the
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
6-23
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
OutLAC2
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the location area ID 2 of the
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-24
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
OutLAC3
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the location area ID 3 of the
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
OutCI1
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the ID 1 of the external target
Description
cell in handovers.
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OutCI2
3GPP Name
None
3GPP Reference
None
6-26
SJ-20100524164252-017|2011-07-28 (R1.4)
cell in handovers.
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OutCI3
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the ID 3 of the external target
Description
cell in handovers.
Managed Object
BSC
6-27
SJ-20100524164252-017|2011-07-28 (R1.4)
0..65535
Value Range and Step
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Outer RNC 1
Abbreviation
OutRNC1
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the RNC_ID 1 of the external
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
6-28
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Outer RNC 2
Abbreviation
OutRNC2
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the RNC_ID 2 of the external
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
6-29
SJ-20100524164252-017|2011-07-28 (R1.4)
None
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Outer RNC 3
Abbreviation
OutRNC3
3GPP Name
None
3GPP Reference
None
This parameter is used internally to indicate the RNC_ID 3 of the external
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
None
None
Change Mode
Offline
6-30
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork->BSC Managed Element->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
OldToNewctrl
3GPP Name
None
3GPP Reference
Description
parameters. The value "0" means "no" and "1" means "yes".
Managed Object
BSC
0..255; step: 1
6-31
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
IPAInterHo
3GPP Name
None
3GPP Reference
None
This parameter determines the handover mode selected when the CS service initiates intra-BSC handover in the 3GPP IPA. By default, compatible
versions are used before and after intra-BSC handover and the handover
is implemented based on the flow stipulated in the protocol. If this parameter is configured to "1", the service can use the handover flow supported
by the MSC during AMR-HR or AMR-FR handover using SET 1. If this
parameter is configured to "2", intra-BSC handover to the preferred BSC
Description
6-32
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSS
0..2
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
ResumeSetOpt
3GPP Name
None
3GPP Reference
None
This parameter decides whether to initiate the GB-interface suspend
Description
Managed Object
BSC
1: Yes; 0: No
6-33
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
HandOutQueInd
3GPP Name
None
3GPP Reference
None
This parameter indicates whether queuing is allowed during inter-BSC
outgoing handovers, that is, whether queuing is allowed according to the
Description
Managed Object
BSC
Unit
None
6-34
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGO-01-03-001 eMLPP
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SendCellPreferInd
3GPP Name
None
3GPP Reference
None
6-35
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter decides whether to include Cell Prefer Ind in the complete
L3 messages. When China Mobile's IPA is applied to the A interface,
setting this parameter to Yes allows including the parameter Cell Prefer
Ind in the complete L3 messages. In this case, the channel type that the
current BSC prefers to allocate will be notified to the MSC according to
the degree of busyness of the current cell (whether the load threshold of
half-rate channel allocation is reached), so that the MSC can decide the
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
ZGO-05-04-003 A over IP
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
IpaAMRStartMode
3GPP Name
None
6-36
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Reference
None
This parameter indicates the initial AMR rate when IPA is applied. When
IPA is applied, the ACS of AMR speech coding modes is specified by
the MSC, so the initial rate cannot be exactly decided. For this reason,
the default rate or the maximum rate is used as the initial rate, and this
applies when ACS is a rate set.
When this parameter is set to Default, the initial rate is coded according
to the default value specified in the protocol 45.009.
When one mode is used, the corresponding rate is used as the initial
coding mode.
When two or three modes are used, the lowest rate is used as the
initial coding mode.
When four modes are used, the second lowest rate is used as the initial
Description
coding mode.
Managed Object
BSC
0: To use the Default initial rate (the protocol 45.009); 1: To use the max-
Unit
None
Default Value
Default Value
When the default initial rate is used, the initial rate is a strong coding
Configuration Reason
mode that applies to the cases in which the radio signal quality is poor.
Generally, the default initial rate is recommended. When the radio signal
quality of the cell is good, you can use the maximum rate as the initial
rate.
Change Mode
Offline
Related features
ZGO-05-04-003 A over IP
Related Parameters
None
Relationship
None
Related Interfaces
Um Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
6-37
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
TdHoEnable
3GPP Name
None
3GPP Reference
None
Description
This parameter decides whether the handovers to TDD cells are allowed.
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Adjustment Suggestion
network.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-38
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AmrHoOpt_0
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to carry out intra-BSC ICM optimization.
ICM optimization refers to using the same voice rate before and after
a handover when AMR is used. When this switch is enabled, if the
BSC receives the pre-handover response from the BTS, it will send the
handover command to the MS. In the command, ICMI and startmode in
the parameter MultiRateconfiguration use the values contained in the
pre-handover response. Otherwise, ICMI and startmode use the values
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
The ICM optimization function has only a little effect on voice quality,
Configuration Reason
so it is disabled by default.
Generally, this function is disabled. However, you can enable it when the
voice quality is poor during handovers to check voice quality changes by
collecting users' feedbacks and measuring the MOS value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
6-39
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
AmrHoOpt_1
3GPP Name
Internal
3GPP Reference
None
This parameter decides whether to carry out inter-BSC ICM optimization.
ICM optimization refers to using the same voice rate before and after
a handover when AMR is used. When this switch is enabled, if the
BSC receives the pre-handover response from the BTS, it will send the
handover command to the MS. In the command, ICMI and startmode in
the parameter MultiRateconfiguration use the values contained in the
pre-handover response. Otherwise, ICMI and startmode use the values
set in the NMS.
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
The ICM optimization function has only a little effect on voice quality,
Configuration Reason
so it is disabled by default.
Generally, this function is disabled. However, you can enable it when the
voice quality is poor during handovers to check voice quality changes by
collecting users' feedbacks and measuring the MOS value.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-40
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CallDelayCtrl
3GPP Name
None
3GPP Reference
None
This parameter is the switch of connection and radio channel activating
synchronization.
When Abis interface adopts E1 transmission, the longer the delay of
LAPD packets, the longer the delay for message interaction becomes.
Meanwhile, BSC sends a command of connection and channel activating
to BTS, so as to reduce the message interaction delay. If Abis interface
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
Newly added switch. The default configuration keeps the same with
Configuration Reason
that of no switch.
If Abis interface adopts E1 transmission, it is recommended to enable
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
6-41
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
HoRqdCtrl_0
3GPP Name
None
3GPP Reference
None
This parameter indicates whether the HANDOVER REQUIRED
message contains TRACEID.
It is mainly used to CDT trace call. When the call handover is performed
at the external cell, the TRACEID message is added to and transmitted
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
No
Default Value
This switch, a new switch, exists or not, setting of the default value is
Configuration Reason
the same.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
6-42
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
InterBSCSDHOout
3GPP Name
Internal
3GPP Reference
None
This parameter indicates whether inter-BSC handover on SDCCH is
allowed. When the parameter value is 1, the target cell of a handover
on SDCCH can be an external cell. When the parameter value is 0, an
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
The default value of this parameter is set to 0 due to the possibility that
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
None
6-43
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
Yes
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RQAvgUseBER
3GPP Name
None
3GPP Reference
None
This parameter indicates whether BER is used for quality averaging.
When this switch is enabled, the RQ level is converted into BER and
then used for the averaging of measurement report. When this switch is
disabled, the RQ level is directly used for the averaging of measurement
Description
report.
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
6-44
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CheckIMSIWhenAccess
3GPP Name
None
3GPP Reference
None
This parameter decides whether to check IMSI during access.
When some mobile phones re-access the network after call drop, IMSI is
carried in the initial access information, BSC will detect the IMSI conflict
and send CLEAR REQ to MSC, which is taken as call drop both at A
interface and in BSC. If BSC does not check the IMSI conflict, BSC
will not forward CLEAR REQ to the MSC, which is not calculated as a
call drop in BSC. Nevertheless, MSC will detect the conflict and initiate
Description
Managed Object
BSC
Yes/No
Unit
None
Default Value
Yes
Default Value
Configuration Reason
6-45
SJ-20100524164252-017|2011-07-28 (R1.4)
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Use system message method when MSC over loaded or link blocked
Abbreviation
MSCSysInfoFlc
3GPP Name
None
3GPP Reference
None
This parameter decides whether to use system messaging to carry out
flow control when all MSCs is overloaded (Flow control must be enabled
by the overload) or signalling points are congested.
Using system messaging refers to rejecting the access of some MSs
according to the parameter ACCN in system messages. Using FUC
refers to rejecting the access of some MSs according to the number of
Description
Managed Object
BSC
Unit
None
Default Value
FUC
6-46
SJ-20100524164252-017|2011-07-28 (R1.4)
The FUC can initiate flow control according to the importance of services.
Default Value
When the MSCs are not heavily overload or the signalling points are not
Configuration Reason
heavily congested, the FUC-based flow control has less effect on user
satisfaction than the system messaging-based flow control.
This parameter only affects MSC overloads and signalling point
congestions. As the most effective flow control method, the system
Adjustment Suggestion
disables the access to the cell. The FUC-based flow control rejects
the access of MSs by access reason. The FUC-based flow control is
recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CPUSysInfoFlc
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable system messaging-based flow
control when the CPU usage of the CMP increases to the threshold of the
Description
Managed Object
BSC
1: Yes; 0: No
6-47
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
No
Default Value
Configuration Reason
The parameters CpuSysInfoFlc and CpuFucFlc only affect the CPU flow
control. The CPU flow control can be achieved by using the system
messaging-based flow control along with the FUC-based flow control.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CPUSysInfoCTLCPU
3GPP Name
None
3GPP Reference
None
This parameter indicates the CMP's CPU usage threshold that triggers the
system messaging-based flow control when being exceeded. That is to
say, if the CPU usage exceeds the threshold and the parameter CpuSysInfoFlc is set to "Yes", the system messaging-based flow control will be
Description
enabled.
Managed Object
BSC
0..100; step: 1
Unit
%
6-48
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Default Value
Configuration Reason
65
For the CMP, CPU usage of 65% or above is generally considered to
be high. In this case, you can selectively put some services under flow
control to avoid higher CPU usage.
"This parameter is valid when the parameter CpuSysInfoFlc is enabled.
Generally, the default value is recommended. The higher the threshold
is, the higher the CPU usage must be before flow control is enabled.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]CPUSysInfoFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CPUFucFlc
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable FUC-based flow control when
the CPU usage of the CMP increases to the threshold of the FUC-based
Description
flow control.
Managed Object
BSC
1: Yes; 0: No
6-49
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Yes
The FUC can initiate flow control according to the importance of
Default Value
services. When the CPU is not overloaded, the FUC-based flow control
Configuration Reason
The parameters CpuSysInfoFlc and CpuFucFlc only affect the CPU flow
control. The CPU flow control can be achieved by using the system
messaging-based flow control along with the FUC-based flow control.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CPUFucCtlCPU
3GPP Name
None
3GPP Reference
None
This parameter indicates the CMP's CPU usage threshold that triggers
the FUC-based flow control when being exceeded. That is to say, if the
CPU usage exceeds the threshold and the parameter CpuFucFlc is set to
Description
Managed Object
BSC
0..100; step: 1
6-50
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Default Value
75
Default Value
Configuration Reason
is, the higher the CPU usage must be before flow control is enabled.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
[BSC]CPUFucFlc
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CpuPagingFlc
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable paging flow control when
Description
Managed Object
BSC
6-51
SJ-20100524164252-017|2011-07-28 (R1.4)
Yes, No
Value Range and Step
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CpuPagingCtlCpu
3GPP Name
None
3GPP Reference
None
This parameter indicates the CPU usage threshold that triggers the
Description
Managed Object
BSC
0..100; step: 1
Unit
Default Value
80
6-52
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6.2.8 The maximum control level for MSC overload or link block
(MSCFlcMaxLevel)
Full Name
Abbreviation
MSCFlcMaxLevel
3GPP Name
None
3GPP Reference
None
This parameter indicates the highest flow control level when MSCs are
Description
Managed Object
BSC
0..10; step: 1
Unit
None
Default Value
6-53
SJ-20100524164252-017|2011-07-28 (R1.4)
According to the default FUC threshold, setting the level to 6 can put
Default Value
about half traffic under flow control. If the system load cannot be
Configuration Reason
flow control bitmap. The higher the value is, the higher the level will be
allowed for the flow control triggered by MSC overloads or signalling
point congestions. Similarly, lower values correspond lower flow control
levels.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ChlReqNum
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of services that can be accepted
by the system per second. It decides the number of channel requests
Description
Managed Object
BSC
200..1000; step: 1
6-54
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Time
Default Value
400
Default Value
Configuration Reason
Adjustment Suggestion
value is, the higher the number of channel requests processed by the
system will be. Similarly, lower values correspond to lower numbers.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PagingNum
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of paging messages that can
be processed by the system per second. The number is controlled
according to the module level. If the actual number exceeds this
Description
Managed Object
BSC
50..500; step: 1
6-55
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
Time
Default Value
300
Default Value
Configuration Reason
Change Mode
Offline
Related features
ZGB-02-01-001 Paging_FG
Related Parameters
None
Relationship
None
Related Interfaces
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Handover BCCH
Abbreviation
CanBCCHEx
3GPP Name
None
3GPP Reference
None
This parameter indicates whether dynamic BCCH shift function is enabled
in the BSC. Another prerequisite of successful dynamic BCCH shift in a
Description
Managed Object
BSC
6-56
SJ-20100524164252-017|2011-07-28 (R1.4)
Yes, No
Unit
None
Default Value
No
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[Cell]CanBcchExch
Relationship
The dynamic BCCH shift function only takes effect when the functional
switch of the BSC and that of the cell are both enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Scan BCCH
Abbreviation
ScanBCCH
3GPP Name
None
3GPP Reference
None
This parameter specifies the period for scanning the availability of BCCH
TRX when the dynamic BCCH shift function is enabled in the cell. When
the dynamic BCCH shift function is enabled, the network will scan the
status of BCCH TRXs at the specified period and check whether the shift
criterion is fulfilled. This parameter can reflect the response time of a
Description
Managed Object
BSC
6-57
SJ-20100524164252-017|2011-07-28 (R1.4)
600..9000
Value Range and Step
Step: 1
Unit
100ms
Default Value
3000
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
BCCHDelay
3GPP Name
None
3GPP Reference
None
This parameter indicates the initial delay before a BCCH shift. The network will check the status of BCCH TRX when the timer expires. If a
Description
Managed Object
BSC
6-58
SJ-20100524164252-017|2011-07-28 (R1.4)
20..1800
Value Range and Step
Step: 1
Unit
100ms
Default Value
1200
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
ReBcchEx
3GPP Name
None
3GPP Reference
None
6-59
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter indicates the delay time before the success of a BCCH
shift. If no block acknowledgement or block failure message is received
from the BTS before the timer expires, the network will reselect a TRX
for the BCCH shift.
Start: When a block message is sent after a TRX for shift is selected, or
a TRX unblock message is sent.
Stop: When a TRX unblock acknowledgement message is received.
At expiry: Research for the cell that needs a BCCH shift and initiate
Description
Managed Object
BSC
20..1800
Step: 1
Unit
100ms
Default Value
1200
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-60
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TrxRel
3GPP Name
None
3GPP Reference
None
This parameter indicates the delay time for forced release of TRX. During
a BCCH shift, if a TRX carrying CS services is selected as the target TRX
for BCCH shift, the network notifies the TRX to hand over the CS services
to another cell. Upon the expiry of this timer, all services of the TRX will
Description
be forcibly released.
Managed Object
BSC
20..200
Step: 1
Unit
100ms
Default Value
60
Default Value
Generally, one minute is enough for the TRX to hand over its CS
Configuration Reason
statistic that forced handover seldom occurs but forced release caused
Adjustment Suggestion
by BCCH shift frequently occurs, you can prolong the delay time
appropriately.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-61
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
MaxChangeProc
3GPP Name
None
3GPP Reference
None
This parameter determines the number of cells in a module that simulta-
Description
Managed Object
BSC
1..8
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value is 2, that is, simultaneous shifts are allowed in at most
two cells. If a greater value is selected, conflict or delay may occur due
to simultaneous shifts in too many cells.
Adjustment Suggestion
configuration of cells.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-62
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
CanSDCCHDyn
3GPP Name
None
3GPP Reference
None
This parameter indicates whether dynamic SDCCH/TCH conversion is
enabled in the BSC. The network can dynamically perform conversions
between SDCCH and TCH when this function is enabled. Another prerequisite of successful dynamic SDCCH/TCH conversion in a cell is that
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[Cell]CanSdcchDyn
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-63
SJ-20100524164252-017|2011-07-28 (R1.4)
Scan SDCCH
Abbreviation
ScanSDCCH
3GPP Name
None
3GPP Reference
None
This parameter indicates the period of scanning idle SDCCHs when the
dynamic SDCCH/TCH conversion function is enabled in a cell. After the
dynamic SDCCH/TCH conversion function is enabled in a network, the
network scans SDCCHs at the period specified by this parameter to find
the number of idle SDCCHs for determining whether to convert SDCCH
Description
back to TCH.
Managed Object
BSC
10..1000
Step: 1
Unit
100ms
Default Value
100
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-64
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
TsRel
3GPP Name
None
3GPP Reference
None
This parameter indicates the waiting time before a TS is forcibly released.
During the dynamic conversion from SDCCH to TCH, the TS tries to
switch its service to another TS first. If the switching fails, the TS will
Description
Managed Object
BSC
5..200
Step: 1
Unit
100ms
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]CanSDCCHDyn
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-65
SJ-20100524164252-017|2011-07-28 (R1.4)
Delay protection
Abbreviation
MaxDelay
3GPP Name
None
3GPP Reference
None
This parameter is an expiration timer used for delay protection. It specifies the allowable delay before an acknowledgement indicating the completion of dynamic BCCH shift or SDCCH conversion is received from the
BTS when the shift or conversion conditions are met in a cell with the
dynamic BCCH shift function or dynamic SDCCH conversion function en-
Description
Managed Object
BSC
1200..2400
Step: 1
Unit
100ms
Default Value
1800
Default Value
Configuration Reason
Change Mode
Offline
Related features
Configuration of SDCCH
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-66
SJ-20100524164252-017|2011-07-28 (R1.4)
TCH->SDCCH limit
Abbreviation
MinSDCCH
3GPP Name
None
3GPP Reference
None
This parameter specifies the threshold that triggers a TCH-to-SDCCH
conversion in a cell where SDCCH dynamic configuration is enabled.
When the number of idle SDCCHs is lower than this threshold, a TCH-
Description
Managed Object
BSC
2..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-67
SJ-20100524164252-017|2011-07-28 (R1.4)
SDCCH->TCH delay
Abbreviation
TimeToTch
3GPP Name
None
3GPP Reference
None
This parameter is used to specify a time limit to prevent frequent SDCCH/TCH conversions when dynamic SDCCH/TCH conversion is enabled in a cell. That means, an SDCCH that used to be converted from
a TCH can only be converted back to TCH when the time limit is up after
the SDCCH becomes idle. In other words, the conversion from SDCCH
to TCH is not allowed within this time limit. The value of this parameter is
actually a step. The time limit is determined by this step and the SDCCH
Description
Managed Object
BSC
2..64
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
[BSC]ScanSDCCH
Relationship
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
6-68
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
B2 support AMR
Abbreviation
V2TruSupportAMR
3GPP Name
None
3GPP Reference
None
Whether the BTS 2.0 carrier on the BTSV2 site supports the AMR voice
algorithm decides whether the services on the carrier can use AMR voice
Description
coding.
Managed Object
BSC
0: No 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-69
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
CHR enable
Abbreviation
ChrEnable
3GPP Name
None
3GPP Reference
None
This parameter decides whether to enable the Call History Record (CHR)
function. If yes, all the previously-cached signalling will be reported to the
Description
Managed Object
BSC
0: No 1: Yes
Unit
Null
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Null
Related Parameters
Null
Relationship
Null
Related Interfaces
Null
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
Null
Parameter Modifying
Detail
Null
6-70
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Reslimit_3
3GPP Name
None
3GPP Reference
None
When a service is released, the degree of busyness of the sub-cell where
the carrier belongs will be calculated. If the number of idle TCHF and
TCHH/2 channels is more than the number of available channels (including available TCHFs, TCHH/2s, and PDCCHs) multiplied by 1 minus
the threshold degree of busyness of the sub-cell, the CS services in the
sub-cell will be transferred for a better continuity of PS channels. That
is to say, when the degree of busyness of the sub-cell is less than the
Description
Managed Object
BSC
40..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
None
Among the cells that have the same number of idle channels, the higher
the threshold degree of busyness of the cell is, the more likely the CS
services will be to be transferred.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-71
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AbisAlmDelayTime
3GPP Name
None
3GPP Reference
None
When a link at the Abis interface is broken, the link disconnection alarm
Description
will not be sent if the broken link recovers in the set delay time.
Managed Object
BSC
0..60
Step: 1
Unit
Default Value
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
Nonel
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
CHRFlowCtrlPeriod
6-72
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
Internal
3GPP Reference
None
CHR is the acronym of Call History Record. This parameter (CHRFlowCtrlPeriod) is a timer determining the CHR flow control period. CHRMaxMsgNum specifies the number of CHRs that can be sent during a CHR
flow control period (CHRFlowCtrlPeriod).
CHRFlowCtrlPeriod and
CHRMaxMsgNum are used together to limit the consumption of resources on CMP. CHR is sent to OMP by CMP. When the connection
between OMP and SBCX is normal, OMP stores CHR data on its hard
Description
Managed Object
BSC
0..250
Step: 1
Unit
Default Value
10
Default Value
Configuration Reason
Sending more CHRs in a short time is allowed, that is, a larger parameter
Adjustment Suggestion
value can be set, when the CPUs of CMP and OMP have the capability
for processing the load, and SBCX has enough disk space.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]CHRMaxMsgNum
No CHR will be reported any longer if the number of reported CHRs
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-73
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
CHRMaxMsgNum
3GPP Name
Internal
3GPP Reference
None
CHR is the acronym of Call History Record. This parameter (CHRMaxMsgNum) specifies the maximum number of CHRs that can be sent in
the CHR flow control period (CHRFlowCtrlPeriod). CHRFlowCtrlPeriod
and CHRMaxMsgNum are used together to limit the consumption of
resources. CHR is sent to OMP by CMP. When the connection between
OMP and SBCX is normal, OMP stores CHR data on its hard disk by
Description
Managed Object
BSC
0..255
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
When the CPUs of CMP and OMP have the capability for processing the
Adjustment Suggestion
load, and SBCX has enough disk space, more CHRs can be sent in a
short time, that is, a larger parameter value can be set.
Change Mode
Offline
Related features
None
Related Parameters
[BSC]CHRFlowCtrlPeriod
No CHR will be reported any longer if the number of reported CHRs
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
6-74
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
NC2 support
Abbreviation
NC2support
3GPP Name
None
3GPP Reference
None
This parameter is the system control parameter, indicating whether NC2
in the idle status is supported and whether MS reports the packet mea-
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
No
Default Value
Configuration Reason
Adjustment Suggestion
modify.
Change Mode
Offline
Related features
Related Parameters
[BSC]CtrlOrder
Relationship
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-75
SJ-20100524164252-017|2011-07-28 (R1.4)
MR server IP
Abbreviation
MRSvrIP
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
Unit
None
Default Value
0.0.0.0
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
MR server port
Abbreviation
MRSvrPort
3GPP Name
None
3GPP Reference
None
6-76
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
This parameter specifies the port No. of TCP listener on the MR server.
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrDynShareSupport_0
3GPP Name
None
3GPP Reference
None
This parameter is a switch that decides whether to support the dynamic
Description
Managed Object
BSC
0: No 1: Yes
6-77
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
resources by sharing the unused power of the carriers that have small
Adjustment Suggestion
transmit power with the carriers that requires large transmit power. In
this way, the maximum transmit power of each carrier is increased.
Change Mode
Offline
Related features
Related Parameters
[Cell]PwrDynShare
Relationship
This switch is valid only when the global power sharing switch and the
cell-level power sharing switch are both enabled.
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrDynShareSupport_1
3GPP Name
None
3GPP Reference
None
This parameter is a switch that decides whether to reduce the initial
downlink power of the TCH according to the SDCCH measurement
Description
report.
Managed Object
BSC
0: No 1: Yes
6-78
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PwrDynShareSupport_2
3GPP Name
None
3GPP Reference
None
This parameter is a switch to support the congestion control based on
Description
Managed Object
BSC
0: No
1: Yes
Unit
None
Default Value
No
6-79
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Adjustment Suggestion
Change Mode
Offline
Related features
Related Parameters
[BSC]PwrDynShareSupport_0
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
ing
Abbreviation
ChannelPwrAdjItvl
3GPP Name
None
3GPP Reference
None
This parameter specifies an interval between power and congestion control actions to prevent performance degrade due to too frequent power
and congestion control actions (for example, intra-cell handover and in-
Description
ter-cell handover).
Managed Object
BSC
5..255
Step: 1
Unit
6-80
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
10
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
BER Weight
Abbreviation
VoiceQualWeight_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of BER, a factor influencing the
speech quality measurement. The system increases or decreases the
weight of this factor according to the actual configuration when calculating
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
6-81
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
FER Weight
Abbreviation
VoiceQualWeight_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of FER, a factor including the speech
quality measurement. The system increases or decreases the weight
of this factor according to the actual configuration when calculating the
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
6-82
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
VoiceQualWeight_2
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of handover frequency, a factor influencing the speech quality measurement. The system increases or decreases the weight of this factor according to the actual configuration
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
6-83
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
DTX weight
Abbreviation
VoiceQualWeight_3
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of DTX, a factor influencing the
speech quality measurement. The system increases or decreases the
weight of this factor according to the actual configuration when calculating
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
VoiceQualWeight_4
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of coding/decoding type, a factor
influencing the speech quality measurement. The system increases or
decreases the weight of this factor according to the actual configuration
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
6-85
SJ-20100524164252-017|2011-07-28 (R1.4)
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
VoiceQualWeight_5
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of error code in Abis transmission, a
factor influencing the speech quality measurement. The system increases
or decreases the weight of this factor according to the actual configuration
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
0
6-86
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Delay weight
Abbreviation
VoiceQualWeight_6
3GPP Name
None
3GPP Reference
None
This parameter indicates the weight of delay, a factor influencing the
speech quality measurement. The system increases or decreases the
weight of this factor according to the actual configuration when calculating
Description
Managed Object
BSC
0..65535
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-87
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Reslimit_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of rate that an alarm is raised in
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
6-88
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
Reslimit_1
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of rate that an alarm is raised in
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-89
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Reslimit_2
3GPP Name
None
3GPP Reference
None
This parameter indicates the threshold of rate that an alarm is raised in
Description
Managed Object
BSC
0..100
Step: 1
Unit
Default Value
80
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
DTX factor
Abbreviation
Info_0_8
6-90
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter is a factor used to calculate the actual Abis bandwidth to
be allocated when a cell is accessed by IP, the MS in the cell uses the
DTX mode, and the downlink discontinuous transport function is enabled
(that is, the switch DtxUplinkBcch and DtxDwlink are enabled). The actual
Abis bandwidth is the product of the factor and the bandwidth needed for
Description
Managed Object
Cell
20..100
Step: 1
Unit
None
Default Value
50
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
SToMTrafficThrs_0
6-91
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
To ensure a backup BIPBDSP can back up other master BIPBDSPs,
when a master BIPBDSP is back to normal, the connections on the
backup BIPBDSP will be rolled back to the master BIPBDSP.
However, if the percentage of CS services exceeds the threshold, no
Description
Managed Object
BSC
0..60
Step: 1
Unit
Default Value
5
If there are less than eight connections on one DSP and these
Default Value
Configuration Reason
forcedly and the more effect it will have on performance data. The lower
Adjustment Suggestion
the value is, the fewer CS service users will be released forcedly and
the less effect it will have on performance data.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-92
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SToMTrafficThrs_1
3GPP Name
None
3GPP Reference
None
To ensure a backup BIPBDSP can back up other master BIPBDSPs,
when a master BIPBDSP is back to normal, the connections on the
backup BIPBDSP will be rolled back to the master BIPBDSP. However, if
the percentage of PS services exceeds the threshold, no rollback will
Description
be carried out.
Managed Object
BSC
0..60
Step: 1
Unit
Default Value
15
If there are less than 24 connections on one DSP and these connections
Default Value
Configuration Reason
forcedly and the more effect it will have on performance data. The lower
Adjustment Suggestion
the value is, the fewer PS service users will be released forcedly and
the less effect it will have on performance data.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
6-93
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Close back up
Abbreviation
CloseBackUp
3GPP Name
None
3GPP Reference
None
This parameter decides whether to disable the backup function of the
BIPB DSP and LAPD CPU. In version upgrades, this parameter is set
to Yes to avoid frequent backup adjustments.
Description
Managed Object
BSC
0: No 1: Yes
Unit
None
Default Value
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-94
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
AutoSToMEnable
3GPP Name
None
3GPP Reference
None
This parameter decides whether to support automatic BIPB DSP
Description
Managed Object
BSC
0: No 1: Yes
Unit
None
Default Value
Default Value
The slave BIPBDSP can be used alternately only when this switch is
Configuration Reason
enabled.
Change Mode
Offline
Related features
None
Related Parameters
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-95
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
SToMTimeBitMap
3GPP Name
None
3GPP Reference
None
This parameter indicates the time bitmap for the slave-to-master
changeover of the BIPB DSP. Backup data rollback can cause a wide
range of CS and PS service interruption, which has a big effect on
system performance. Therefore, rollback is carried out not in real time,
but in small-traffic hours.
This parameter provides 24 optional time points (from 0 to 23) for
automatic slave-to-master changeovers. Each time point stands for
an hour, ranging from 0 to 23 o'clock. Automatic slave-to-master
changeovers will be carried out only when you select a time point and
Description
Managed Object
BSC
0..16777215
Unit
None
Default Value
Default Value
Configuration Reason
Generally, the traffic is small at three o'clock in the morning, when the
slave-to-master changeover of the BIPB DSP will cause the minimum
call drops.
You can set this parameter after you find out the smallest-traffic hour
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
6-96
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
6.5.30 Info_5
Full Name
Info_5
Abbreviation
Info_5
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
6-97
SJ-20100524164252-017|2011-07-28 (R1.4)
6.5.31 Info_6
Full Name
Info_6
Abbreviation
Info_6
3GPP Name
None
3GPP Reference
None
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
6.5.32 Info_7
Full Name
Info_7
Abbreviation
Info_7
3GPP Name
None
3GPP Reference
None
6-98
SJ-20100524164252-017|2011-07-28 (R1.4)
Description
Managed Object
BSC
0..4294967295
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
No
Parameter Modifying
Version
iBSCV6.20.614d
Parameter Modifying
Detail
New
Abbreviation
Info_0_0
3GPP Name
None
3GPP Reference
None
When the intelligent poweroff function is enabled, this parameter indicates
Description
Managed Object
BSC
6-99
SJ-20100524164252-017|2011-07-28 (R1.4)
Unit
None
Default Value
Default Value
Configuration Reason
off a carrier.
Carrier poweroff affects the channel resources of the cell. However,
the traffic per channel does not reflect the changes of these channel
Adjustment Suggestion
resources. Peak channel load can reflect the occupancy of the channel
resources. However, frequent poweron and poweroff must be avoided.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PingPongDura
3GPP Name
None
3GPP Reference
None
6-100
SJ-20100524164252-017|2011-07-28 (R1.4)
This parameter is a timer used to determine whether a handover is a pingpong handover. The timer is started when an MS is handed over from a
cell. If the MS is handed over back to the source cell, and the interval
between two handovers is shorter than the value of this parameter, this
Description
Managed Object
BSC
0..60
Step: 1
Unit
Default Value
10
Default Value
Configuration Reason
handed over forth and back between two cells within 10 seconds.
The default value is recommended. The larger the parameter value is,
the longer the time is in which a handover is deemed as a ping-pong
handover.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
LatestMeasureRptNum
6-101
SJ-20100524164252-017|2011-07-28 (R1.4)
3GPP Name
None
3GPP Reference
None
This parameter indicates the number of measurement reports that are
used for averaging before a call drop. According to the analysis of
average level and quality, the cause of the call drop can be found. The
MS periodically reports measurement reports, which can be used to find
the call drop cause. This parameter (LatestMeasureRptNum) indicates
the number of measurement reports received from the MS.
If the number of measurement reports received from the MS is
smaller than LatestMeasureRptNum, the call drop cause cannot be
found, and the call drop will be counted as "other call drops". If the
number of measurement reports received from the MS is larger than
LatestMeasureRptNum, the measurement reports will be averaged to
Description
Managed Object
BSC
0..10
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
6-102
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Detail
None
Abbreviation
DropBadQualULThs
3GPP Name
None
3GPP Reference
None
This parameter specifies a threshold for the statistics of call drops. A call
drop will be counted as call drop caused by poor uplink quality when the
Description
Managed Object
BSC
0..70
Step: 1
Unit
None
Default Value
50
Default Value
Configuration Reason
For populous urban areas with much interference and poor network
quality, you can set this parameter to a higher value and the value 59 is
recommended.
For rural areas with litter interference and good network quality, you can
set this parameter to a lower value and the value 50 is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
Negotiation With CN
NO
6-103
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DropBadQualDLThs
3GPP Name
None
3GPP Reference
None
When a call drop occurs, it will be counted as a call drop caused by poor
Description
downlink quality if the downlink quality value is not less than the threshold.
Managed Object
BSC
0..70
Step: 1
Unit
None
Default Value
50
Default Value
Configuration Reason
None
You can set this parameter according to the network quality. For
populous urban areas where interference is high and network quality is
poor, you can set this parameter to a higher value and the value 59 is
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
6-104
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DropLowSigStrULThs
3GPP Name
None
3GPP Reference
None
When a call drop occurs, it will be counted as a call drop caused by low
Description
level if the uplink level value is not more than the threshold.
Managed Object
BSC
0..63
Step: 1
Unit
None
Default Value
12
Default Value
Configuration Reason
None
You can set this parameter according to the network coverage.
For populous urban areas where the network coverage is large, you can
set this parameter to a higher value and the value 10 is recommended.
For rural areas where the network coverage is small, you can set this
parameter to a lower value and the value 8 or 6 is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
0
6-105
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DropLowSigStrDLThs
3GPP Name
None
3GPP Reference
None
When a call drop occurs, it will be counted as a call drop caused by low
Description
level if the downlink level value is not more than the threshold.
Managed Object
BSC
0..63
Step: 1
Unit
None
Default Value
12
Default Value
Configuration Reason
For populous urban areas where the network coverage is large, you can
set this parameter to a higher value and the value 14 is recommended.
For rural areas where the network coverage is small, you can set this
parameter to a lower value and the value 12 is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
Impact on service
0
6-106
SJ-20100524164252-017|2011-07-28 (R1.4)
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Excessive TA threshold
Abbreviation
DropExcessiveTAThs
3GPP Name
None
3GPP Reference
None
When a call drop occurs, it will be counted as a call drop caused by long
TA if the distance between the MS and the network (reflected by the TA
Description
Managed Object
BSC
0..63
Step: 1
Unit
None
Default Value
20
Default Value
Generally, if the TA value is higher than 20, the distance between the
Configuration Reason
MS and the BTS is considered to be too long and call drops can occur.
You can set this parameter according to the network coverage.
For populous urban areas where site coverage is small, you can set this
parameter to a lower value and the value 10 is recommended.
For rural areas where site coverage is large, you can set this parameter
to a higher value and the value 20 is recommended.
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Abis
Impact on Equipment
6-107
SJ-20100524164252-017|2011-07-28 (R1.4)
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_0_1
3GPP Name
None
3GPP Reference
None
This parameter decides whether to support automatic baseband frequency hopping switchovers. This function can be enabled only when
the BSC- and cell-level switches are enabled. When a carrier in the
frequency hopping group fails, the system will automatically remove the
carrier from the frequency hopping group and move it back after the
Description
Managed Object
BSC
1: Yes
0: No
Unit
None
Default Value
0: No
Default Value
Configuration Reason
6-108
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
Related Parameters
[Cell]Info_0_3
Relationship
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_0
3GPP Name
None
3GPP Reference
None
This parameter indicates the time interval to scan whether the carriers of
the baseband frequency hopping need to be switched over.
Start: This timer starts periodically.
Stop: The timer expires.
At expiry: The BSC will check whether any baseband frequency hopping
Description
Managed Object
BSC
6-109
SJ-20100524164252-017|2011-07-28 (R1.4)
600..9000
Value Range and Step
Step: 1
Unit
100 ms
Default Value
3000
Default Value
The default value should be larger than the carrier reset time and the
Configuration Reason
Adjustment Suggestion
Otherwise, the lower the value is, the shorter time it will take. However,
the time must not be shorter than the total value of the parameters
Info_1_16 and Info_2_0.
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
Info_1_16
3GPP Name
None
3GPP Reference
None
6-110
SJ-20100524164252-017|2011-07-28 (R1.4)
Managed Object
BSC
100..3000
Step: 1
Unit
100 ms
Default Value
1800
Default Value
Three minutes are long enough to send radio configuration data to the
Configuration Reason
BTS.
sending radio configuration data to the BTS. The value must not be lower
Adjustment Suggestion
than the time that is needed by the BSC to send radio configuration
This parameter should be set to a value that allows the BSC to finish
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-111
SJ-20100524164252-017|2011-07-28 (R1.4)
Abbreviation
Info_2_0
3GPP Name
None
3GPP Reference
None
When the BSC detects that a baseband frequency hopping carrier needs
to be switched over, it will wait for a period of time before making another
check to decide whether a switchover is still needed. This parameter
indicates the dealy time.
Start: The system detects a baseband frequency hopping carrier failure.
Stop: The timer expires.
At expiry: The BSC will remove failed carriers from the frequency
Description
hopping group.
Managed Object
BSC
100..1800
Step: 1
Unit
100 ms
Default Value
600
Default Value
Configuration Reason
is required.
Shielding the carrier failures in a certain period of time can avoid
Change Mode
Offline
Related features
Related Parameters
None
Relationship
None
Related Interfaces
None
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
6-112
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Two-phase access
Abbreviation
TwoPhaseAccess
3GPP Name
None
3GPP Reference
None
This parameter decides whether the MS uses two-phase access forcedly
Description
Managed Object
BSC
1: Yes; 0: No
Unit
None
Default Value
Yes
Default Value
The default value is set to know the radio capabilities of the MS as soon
Configuration Reason
as possible.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
6-113
SJ-20100524164252-017|2011-07-28 (R1.4)
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GBMsgSndInd_0
3GPP Name
None
3GPP Reference
None
This parameter decides whether to send the radio status message to
the SGSN in the following cases:
The MS is out of the coverage and the reason is described as "radio
connection with MS interrupted".
Radio quality is poor and the reason is described as "radio quality is not
good enough".
The MS is required to carry out a cell reselection at the network side and
the reason is described as "cell reselection command".
The MS cannot be required to carry out a cell reselection or internal
rerouting at the network side, and the reason is described as "ready
for cell reselection".
PCCO fails and the reason is described as "cell reselection failure".
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
will suspend data sending after receiving the Status message, you
Adjustment Suggestion
can set this switch according to the duration of the suspension. If the
suspension affects the DT test, you can disable the switch.
Change Mode
Offline
Related features
None
Related Parameters
None
6-114
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
GBMsgSndInd_1
3GPP Name
None
3GPP Reference
None
This parameter decides whether to send discarded LLC frames to the
SGSN. If it is set to Yes, the LLC frames discarded in the local cell will
be sent to the SGSN.
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
Yes
Default Value
Configuration Reason
Configuration Rule and
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
6-115
SJ-20100524164252-017|2011-07-28 (R1.4)
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
RadStaQuaThs
3GPP Name
None
3GPP Reference
None
Upon the overflow of N3105, a RADIO STATUS message is sent to the
SGSN. The RADIO STATUS message contains a cause value: 0 or 1.
The cause value 0 indicates a broken radio link to the MS. The cause
value 1 indicates a poor radio quality. The BSC can judge whether the
cause value in the radio status message is 0 or 1 by comparing the radio
quality provided by the DOWNLINK ACK message with the threshold
Description
Managed Object
BSC
0..31
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
The default value of this parameter depends on the radio link quality.
Set the threshold for radio status according to the actual radio quality
Adjustment Suggestion
6-116
SJ-20100524164252-017|2011-07-28 (R1.4)
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Gb
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed element ID->Config
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
PacketTBFRel
3GPP Name
None
3GPP Reference
None
If exceptions, such as channel exceptions or FAI response exceptions,
occur at the network side, this parameter will be used to decide whether
Description
Managed Object
BSC
Yes, No
0: No; 1: Yes
Unit
None
Default Value
No
Default Value
Configuration Reason
6-117
SJ-20100524164252-017|2011-07-28 (R1.4)
immediately or after the exception expires. If the TBFs are not released
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
None
Parameter Modifying
Detail
None
Abbreviation
DwBufRetryInterval
3GPP Name
None
3GPP Reference
None
When a downlink TBF release occurs due to exceptions, the BSSGP will
turn to Buffer status. This parameter indicates the time interval to initiate
Description
Managed Object
BSC
0..255
Step: 1
Unit
10 ms
Default Value
10
6-118
SJ-20100524164252-017|2011-07-28 (R1.4)
Default Value
Configuration Reason
reaccess time.
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
Abbreviation
DwBufRetryNum
3GPP Name
None
3GPP Reference
None
When a downlink TBF release occurs due to exceptions, the BSSGP will
turn to Buffer status. This parameter indicates the number of immediate
Description
Managed Object
BSC
0..5
Step: 1
Unit
None
Default Value
Default Value
Configuration Reason
reaccess time.
6-119
SJ-20100524164252-017|2011-07-28 (R1.4)
Adjustment Suggestion
Change Mode
Offline
Related features
None
Related Parameters
None
Relationship
None
Related Interfaces
Um
Impact on Equipment
Impact on service
Negotiation With CN
NO
OMC->GERAN Subnetwork ID->BSC Managed Element ID->Config Set
Parameter Modifying
Version
None
Parameter Modifying
Detail
None
6-120
SJ-20100524164252-017|2011-07-28 (R1.4)
Appendix A
Class
Rxlev_Ac-
Penalty
Cell select
Level
Number
cess_Min
Time
Offset
-1(255)
-2(254)
-2(254)
-3(253)
-3(253)
-3(253)
-4(252)
-3(253)
-4(252)
-3(253)
11111
-3(253)
-3(253)
11111
-2(254)
-3(253)
11111
-1(255)
-3(253)
10
11111
-3(253)
11
11111
-3(253)
12
10
11111
-3(253)
MaxTx-integer
Retrans
A-1
SJ-20100524164252-017|2011-07-28 (R1.4)
A-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Appendix B
Power Values
GSM900
GSM1800
MS Output
Value
MS Output
Power (dBm)
Value
Power (dBm)
0~2
39
29
36
37
30
34
35
31
32
33
30
...
...
...
16
11
...
...
17
13
18
14
19~31
15 ~ 28
28
B-1
SJ-20100524164252-017|2011-07-28 (R1.4)
B-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Appendix C
Current
Cell
GSM
GSM
Sectoral
GSM 900M
GSM 900M
1800M
1800M
Cell
Macro Cell
Micro Cell
Macro Cell
Micro Cell
Pico Cell
Sectoral
Cell
SAME
LOWER
LOWER
LOWER
UPPER
SAME
UPPER
LOWER
LOWER
SAME
LOWER
LOWER
cro Cell
UPPER
UPPER
SAME
LOWER
Pico Cell
UPPER
UPPER
GSM 900M
Macro Cell
GSM 900M
Micro Cell
GSM
1800M
Macro Cell
GSM
1800M Mi-
C-1
SJ-20100524164252-017|2011-07-28 (R1.4)
C-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Appendix D
Relationship between
Parameter Interface and
Database Value
This section introduces the relation between parameter interface and database value.
Table of Contents
BSC Function Parameters Interface........................................................................ D-1
GERAN External Cell Parameters .......................................................................... D-8
UTRAN External Cell Parameters ........................................................................... D-9
Cell Parameters...................................................................................................... D-9
Cell Object Parameters Interface .......................................................................... D-19
Database value
2 digits
3 digits
Database value
CTCN
CMCN
China
Unicom
Communication
Network
(CUCN)
D-1
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
Network 7
Network 8
SP Type (SpType)
Interface value
Database value
SEP
Database value
Inner TC
Outer TC
Database Value
-720
-690
-660
(GMT-10:30) Hawaii
-630
(GMT-10:00) Hawaii
-600
(GMT-09:30) Alaska
-570
(GMT-09:00) Alaska
-540
-510
-480
(GMT-07:30) Arizona
-450
(GMT-07:00) Arizona
-420
(GMT-06:30) Mexico
-390
-360
-330
-300
D-2
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database Value
-270
-240
(GMT-03:30) Newfoundlander
-210
-180
(GMT-02:30) Mid-Atlantic
-150
(GMT-02:00) Mid-Atlantic
-120
-90
-60
-30
30
60
90
120
150
(GMT+03:00)
Baghdad,
Kuwait,
Riyadh,
Moscow
180
(GMT+03:30) Teheran
210
240
(GMT+04:30) Kabul
270
300
330
360
(GMT+06:30) Rangoon
390
420
450
(GMT+08:00) Beijing
480
(GMT+08:30) Beijing
510
540
570
D-3
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database Value
600
630
660
690
720
750
(GMT+13:00) Nuku'alofa
780
Database value
DCS1800
PCS1900
Database value
Release 98 or older
Release 99 or newer
D-4
SJ-20100524164252-017|2011-07-28 (R1.4)
Note:
In this manual, the shift jointing mode is expressed by a formula.
For
instance, (PreferSpeechVer_0<<2) + PreferSpeechVer_1, meaning the value
of PreferSpeechVer_0 is shifted two bits to left and jointed with the value of
PreferSpeechVer_1.
Interface value
Database value
Half-rate version 1
Half-rate version 3
Database value
Full-rate version 1
Full-rate version 2
Full-rate version 3
TFOControl
TFOControl is a jointed field. Jointing mode: addition by bit after shift
TFOControl = (TFOControl _3<<3) + (TFOControl _2<<2) + (TFOControl _1<<1) +
TFOControl _0.
TFOControl_0: TFO Enable
TFOControl_1: coding/decoding type optimization enable
TFOControl_2: coding/decoding type unmatched enable
TFOControl_3: AMR optimization mode
SJ-20100524164252-017|2011-07-28 (R1.4)
IsAmrICM is a jointed field in database. AMR half-rate is jointed with full-rate, jointing
mode: IsAmrICM (full) + IsAmrICM (half), jointed by string.
Interface value
Database value
Startmode codec
Database value
Startmode codec
SJ-20100524164252-017|2011-07-28 (R1.4)
Cn
CN is a jointed field in the database. Jointing mode: jointed by string from top to
bottom.
Nn
Nn is a jointed field in the database. Jointing mode: jointed by string from top to
bottom.
Xn
Xn is a jointed field in the database. Jointing mode: jointed by string from top to
bottom.
Database value
Database value
D-7
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database Value
Not retry
Retry 1 times
Retry 2 times
Database value
Release 98 or older
Release 99 or newer
Database Value
non-R99 version
R99 version
Database value
Umbrella cell
Macro Cell
Micro cell
Pico Cell
Database value
GSM900
EXT900
DCS1800
PCS1900
GSM850
7
D-8
SJ-20100524164252-017|2011-07-28 (R1.4)
Database value
FDD
TDD
Database value
0 (3.84Mcps)
1 (1.28Mcps)
Database value
Umbrella cell
Macro Cell
Micro cell
Pico Cell
Database value
GSM900
EXT900
DCS1800
PCS1900
GSM850
Database value
GSM900
0
D-9
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
EXT900
DCS1800
PCS1900
GSM850
Database value
No
Support EDGE
EGPRS2-A support
Database value
Database value
CipherMode
D-10
SJ-20100524164252-017|2011-07-28 (R1.4)
InterfBoundary
InterfBoundary is a jointed field in database by InterfBoundary_0~ InterfBoundary_5.
Jointing mode: jointed by string from top to bottom.
Database value
BCCH Norm
BCCH Ext
Database value
Allow priority
T3168
Interface value
Database value
0.5
1.5
2.5
3.5
7
D-11
SJ-20100524164252-017|2011-07-28 (R1.4)
T3192
Interface value
Database value
500
1000
1500
80
120
160
200
Database value
16
32
64
Database value
4 access burst
Database value
8 bits
11 bits
Database value
0
D-12
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
12
16
20
24
28
32
Database value
12
16
20
24
28
32
Database value
12
16
20
24
28
32
Jointing mode:
SJ-20100524164252-017|2011-07-28 (R1.4)
Database value
0.48
0.96
1.92
3.84
7.68
15.36
30.72
61.44
Database value
0.48
0.96
1.92
3.84
7.68
15.36
30.72
61.44
Database value
NC0
NC1
NC2
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
No non-DRX mode
0.24
0.48
0.72
0.96
1.2
1.44
1.92
Database value
EM0
EM1
Database value
Type 1
Type 2
Type 3
Database value
60
120
240
480
960
1920
3840
7680
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
BCCH
PDCH
Database value
10
20
30
40
50
60
Large infinite
Database value
10
15
20
30
60
5
D-16
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
120
300
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
10
12
14
10
16
11
20
12
25
13
32
14
50
15
Database value
12
15
20
30
41
55
76
109
163
217
D-18
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
Database value
MCS1
MCS2
MCS3
MCS4
MCS5
MCS6
MCS7
MCS8
MCS9
Database value
Common TRX
0
D-19
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
Extended TRX
Database Value
253
254
255
TS Channel Combination
Interface value
Database value
TCH/F
1)+TCH/H(0, 1)
SDCCH/8+SACCH/C8
FCCH+SCH+BCCH+CCCH
BCCH+SDCCH/4
BCCH+CCCH
BCCH+SDCCH/4+CBCH
SDCCH+CBCH
PBCCH+PCCCH+PDTCH+PACCH+PTCCH
12
PCCCH+PDTCH+PACCH+PTCCH
13
PDTCH+PACCH+PTCCH
14
SJ-20100524164252-017|2011-07-28 (R1.4)
Interface value
Database value
No preference
255
GPRS preference
EDGE preference
EDGE exclusion
EGPRS2-A Preference
EGPRS2-A dedicated
SJ-20100524164252-017|2011-07-28 (R1.4)
Database value
GSM900
EXT900
DCS1800
PCS1900
GSM850
HoPatternInd
HoPatternInd is a jointed field. Jointing mode: addition by bit after shift.
HoPatternInd = (HoPatternInd4<<3) + (HoPatternInd3<<2) + (HoPatternInd2<<1) +
HoPatternInd1.
HoPatternInd1: Enable synchronized handover
HoPatternInd2: Enable unsynchronized handover
HoPatternInd3: Enable pseudo-synchronization handover
HoPatternInd4: Enable pre-synchronized handover
D-22
SJ-20100524164252-017|2011-07-28 (R1.4)
HoControl
HoControl is a jointed field. Jointing mode: addition by bit after shift.
HoControl = (HoControl18<<17) + (HoControl17<<16) + (HoControl16<<15) +
(HoControl15<<14) + (HoControl14<<13) + (HoControl13<<12) + (HoControl12<<11)
+ (HoControl11<<10) + (HoControl10<<9) + (HoControl9<<8) + (HoControl8<<7)
+ (HoControl7<<6) + (HoControl6<<5) + (HoControl5<<4) + (HoControl4<<3) +
(HoControl3<<2) + (HoControl2<<1) + HoControl1
HoControl1: Enable SDCCH handover
HoControl2: Enable inter-cell handover attempt due to uplink interference
HoControl3: Enable inter-cell handover attempt due to downlink interference
HoControl4: Enable handover due to distance
HoControl5: Enable standard PBGT handover
HoControl6: Enable automatic handover based on traffic
HoControl7: Enable handover based on direction
HoControl8: Enable handover based on homocentric circularity
HoControl9: Enable intra-cell handover in super TRX channel due to downlink
interference
HoControl10:
interference
HoControl11: Enable adjacent cells handover in super TRX channel due to PBGT
HoControl12: Enable dynamic adjustment of handover priority
HoControl13: Enable rapid handover
HoControl14: Enable Macro-Micro delay handover
HoControl15: Enable Micro-Macro delay handover
HoControl16: Enable internal handover based on TA
HoControl17: Enable force transfer handover
HoControl18: Subcell handover algorithm
l
Database value
Concentric handover
SJ-20100524164252-017|2011-07-28 (R1.4)
mode:
FDD_GPRS_Qoffset_0: Idle
FDD_GPRS_Qoffset_1: packet transmission
l
mode:
TDD_GPRS_Qoffset_0: Idle
TDD_GPRS_Qoffset_1: packet transmission
l
FDD_QminPS_0: Idle
FDD_QminPS_1: packet transmission
l
mode:
FDD_Qmin_OffsetPS_0: idle
FDD_Qmin_OffsetPS_1: packet transmission
l
Jointing
mode:
FDD_RSCPminPS_0: Idle
FDD_RSCPminPS_1: Packet transmission
l
Jointing
mode:
FDDRprtTho2PS_0: Idle
FDDRprtTho2PS_1: Packet transmission
D-24
SJ-20100524164252-017|2011-07-28 (R1.4)
Database Value
Database value
Priority to FDD
Database Value
Undefined
Database Value
Undefined
3
D-25
SJ-20100524164252-017|2011-07-28 (R1.4)
Database value
RFID freqhop
D-26
SJ-20100524164252-017|2011-07-28 (R1.4)
Figures
Figure 1-1 Starting NE Agent .................................................................................... 1-3
Figure 1-2 Selecting NE Management > Configuration Management .................... 1-3
Figure 1-3 Configuration Management Interface ....................................................... 1-4
Figure 1-4 Selecting Apply Mutex Right .................................................................. 1-5
Figure 1-5 Information Dialog Box ........................................................................... 1-5
Figure 1-6 Applying Mutex Right Successfully........................................................... 1-5
Figure 1-7 Selecting Release Mutex Right .............................................................. 1-6
Figure 1-8 Selecting Export Network Plan Data ...................................................... 1-6
Figure 1-9 Selecting MOC to Be Exported ................................................................ 1-7
Figure 1-10 Selecting Attributes to Be Exported for MOC.......................................... 1-7
Figure 1-11 Selecting File Type to Be Exported......................................................... 1-8
Figure 1-12 Setting Saving Path and File Name for Data .......................................... 1-8
Figure 1-13 Parameter Data ..................................................................................... 1-8
Figure 1-14 Selecting Batch Apply Network Plan Data......................................... 1-10
Figure 1-15 Selecting File Type to Be Imported....................................................... 1-10
Figure 1-16 Applying Network Planning Data in Batch ............................................ 1-11
Figures
Glossary
3GPP
- 3rd Generation Partnership Project
AMR
- Adaptive Multiple Rate
Abis
- Abis Interface between BSC and BTS
BCCH
- Broadcast Control CHannel
BER
- Bit Error Rate
BSC
- Base Station Controller
BSS
- Base Station System
BTS
- Base Transceiver Station
CHR
- Call History Record
CIR
- Committed Information Rate
DTX
- Discontinuous Transmission
FACCH
- Fast Associated Control Channel
FER
- Frame Error Rate
FUC
- Frame Unit Controller
GERAN
- GSM/EDGE Radio Access Network
GSM
- Global System for Mobile Communication
MR
- Measurement Report
III
MS
- Mobile Station
MSC
- Mobile Switching Center
NSS
- Network Subsystem
SDCCH
- Stand alone Dedicated Control Channel
TCH
- Traffic Channel
TCP
- Transfer Control Protocol
TDD
- Time Division Duplex
TDMA
- Time Division Multiple Access
TRX
- Transmitter and Receiver
TS
- Time Slot
IV