Professional Documents
Culture Documents
Anaerobic Adhesive
Anaerobic Adhesive
Introduction to Anaerobic
Do U Know How ANR Cures?
Prior to Assembly
After Assembly
Anaerobic Adhesive
Definition:-
Anaerobicadhesivesremainliquiduntilisolatedfromoxygeninthepresenceofmetalions,
suchasironorcopper.
Forexample,whenananaerobicadhesiveissealedbetweenanutandaboltonathreaded
assembly,itrapidlycures
.
Cure Characteristics
History
In 1953, American professor Vernon
Krieble developed anaerobic thread
locking adhesive in his basement
laboratory at Trinity college in
Hartford.
Mr. Krieble founded American
Sealants Corporation after developing
a unique polyethylene container that
prevented the anaerobic chemistry
from curing in the bottle.
Anaerobic Adhesives:
Mechanism
Curing
Active Metals
Resinswillfixtureon
ACTIVEmetalswithin5
minutes,fullcurein24
hours.
Steel
Copper
Brass
Bronze
Manganese
Nickel
Iron
Inactive Metals
INACTIVEmetalsneedto
beprimedwithasurface
preparation.
BrightPlatings
AnodizedSurfaces
Titanium
Zinc
Aluminum
StainlessSteel
Cadmium
HowtoUseAdhesives&Sealants
Surface Preparation
Substrates should be free from oil, dust,
Moisture, rust,
Grease etc.
There should not be any Lubricating Film
Dispense adequate quantity either in drops / paste on
substrates
Distribute evenly on surface.
Allow to cure for specific period.