This document outlines the minimum technical specifications required for a drilling rig, including a water depth rating of 80 meters, a variable deck load of 2,332 metric tons, and a drawworks rating of 671,500 pounds. It also specifies requirements for the top drive, pumps, mud and fluid storage, rig power, and accommodation for personnel. The rig must have been manufactured no earlier than 2010 and had its last major upgrade within the past 5 years.
This document outlines the minimum technical specifications required for a drilling rig, including a water depth rating of 80 meters, a variable deck load of 2,332 metric tons, and a drawworks rating of 671,500 pounds. It also specifies requirements for the top drive, pumps, mud and fluid storage, rig power, and accommodation for personnel. The rig must have been manufactured no earlier than 2010 and had its last major upgrade within the past 5 years.
This document outlines the minimum technical specifications required for a drilling rig, including a water depth rating of 80 meters, a variable deck load of 2,332 metric tons, and a drawworks rating of 671,500 pounds. It also specifies requirements for the top drive, pumps, mud and fluid storage, rig power, and accommodation for personnel. The rig must have been manufactured no earlier than 2010 and had its last major upgrade within the past 5 years.
Variable Deck Load Cantilever Outreach Cantilever Transverse (from centre line) Conductor tensioning system (for free standing wells) Drawworks Rating Drawworks Drum HP Derrick Gross Nominal Rating
80 m for Hippo North Well (264ft)
2,332 MT (Well TD phase) 15m Minimum 3m Minimum 100 tonnes working load capability over stroke at least 12. 671,500 lbs (Pulling 9 5/8 casing with 100klb overpull) 1,320 HP (Pulling 9 5/8 casing) 1,295,300 lbs (Drill with returns phase)
Combined Setback and Hoisting loads
1,166,525 lbs (Drill with returns phase) Top Drive Rotary Torque (Pipe handler) Rotary HP Drilling Line Size BOP Pressure Rating Pumps Rig Power Drilling Fluid Storage (Mud tanks) Base Oil Storage Fluid Storage (Brine tanks) Fresh Water Storage Bulk Cement Bulk Mud Sack Storage Sea Water Supply Mud mix system efficiency Mix system flexibility Mud Shakers Accomodation (Personnel) Date of Manufacture Last Upgrade Rig Rate US$/Day Availability Present Location
33,810 ft-lbs (85,000 ft-lbs)
629 HP 1-1/2 IP (Drill with returns phase)
10,000 psi 3 Triplex pumps 1,600 HP (Minimum)
3,000 bbl 800 bbl 1,200 bbl 1,000 bbl
Direct feed to mud pump (1,800 GPM
minimum). Should be able to mix & weigh 1,000 bbl in 8hrs Should be able to mix into active and reserve systems simultaneously 3x linear motion (minimum)