You are on page 1of 2
inforrnation Sheet — Polyethylene Tank Assem NO. 27400 35 GALLON TANK ASSEMBLY + Ultraviolet resistant, yellow polyethylene tank with recess, for mounting of any LMI Series A, P, or J pump. + Fitted for mounting of agitator and liquid level switch. + Provides an economical, all-in-one flooded suction installation. Less to assemble, less to maintain + Shutoffvalve, discharge tubing retainerandlarge upper fill hole complete this unique design + 5 gallon graduations. 20 liter graduations. + Suitable for most corrosive and non-corrosive solutions. LESS) Model No. 27400 Tank Assembly (Pump must be ordered separately.) 8 COMPONENT PARTS 2 | ‘Model 27400 Tank Assembly Fiat] Part INo.| No. | Description on J 1 [27030 | Capplug, PE. largo, 1 2 [27900 | Vawvo, PVC. 1 » [35] 10402 | Fiting, f° NPT PP Hi 3° 27997 | Fting, 171 NPT PP 4 [279984] Relais, Tube i NOTES: 3 [10046 | Cappo. FE, smal 2 ; 6 [27401 | Nipple, 14" PVC 1 1. ul lat bottom support required. § fares | Mppe u Bee = 2. Maximum solution/ambient temperature 110" F (43°). baad [vane z 3. Minimum solution/ambient temperature 0° F (-18° C). 4, Not suitable for use with slurries, concentrated organic solvents, oils and related materials. ‘Shipping Weight: 18 fos (82 kg) ‘Two fitings are supplied with each tank assembly for ‘connection to ether 3/8" OD or 1/4" OD tubing. No. 10 GALLON TANK ASSEMBLY 27421 Ultraviolet resistant, yellow polyethylene tank ‘Molded recesses for mounting of any LMI Series ‘A.J,orP pump. Convenient and light weight, ships economically. Large fill hole at top allows easy replenishing of solution, Slightly translucent yet rugged design allows checking solution level ata glance. wys NOTES: Full, flat bottom support required. ‘Model No. 27421 Tank Assembly (Pump must be ordered separately.) Shipping Weight: 7 Ibs (3.2 kg) 1 2, Maximum solution/ambient temperature 110°F (43°C). 3. Minimum solution/ambient temperature 0" F(-18°C). 4, Not suitable for use with slurries, concentrated organic solvents, ols and related materials. AGITATOR NO. 27591 115 VAC, 50/60 Hz, 1.5 amp, 175 watts, 1/20 HP. 27" SS. shaft with S.S. impeller and resistant coating. (© 1007 LA Mion Roy - Al Fights Reserved Printed in USA ‘Spectications subject to change without notice. LIQUID LEVEL SWATCH NO. 27417 LIS VAC, 50/60 Fiz, imax load: 3 amps. Glass fiber reinforced polypropylesc housing. Debeligalacce (Velo io regiotred tctoman of lca, USA.

You might also like