Professional Documents
Culture Documents
Question
Marks
1.
Section-A
Analyse the frame as shown in fig.-1 in which A and B end fixed and span BC carrying
uniformly distributed load of 12KN/m and 20 KN at point D by slope deflection method.
20
2.
(Fig.-1)
Determine the vertical and the horizontal deflection at the free end of the bent shown in fig.2.Assume uniform flexural rigidity EI throughout using unit load method.
(Fig.-2)
Section-B
Develop the stiffness matrix for the the end loaded prismatic member AB with reference to
the coordinates as shown in fig.- 3. Comment on the relevance of the chosen coordinates.
Examine the reciprocity of the stiffness matrix.
(Fig.-3)
20
20
Develop the flexibility matrix for frame ABCD in which AB and BC are 10m with 4I
flexural rigidity and CD is 5m with I flexural rigidity with reference to the coordinates as
shown in fig. -4
B
C
2
20
(Fig.- 4)
D
3
A
Section-C
5
Analyse the continuous beam as shown in fig. -5 by force method in which span AB
carrying a uniformly distributed load of 40KN/m, span BC carrying load of 120KN at a
distance of 4m from B and span CD carrying load of 20KN/m. Take EI constant throughout.
20
(Fig.-5)
Analyse the pin jointed plane frame as shown in fig-.6 by displacement method the lengths
of the members are shown in figure. The numbers in parenthesis are the cross sectional areas
of the members in mm2. Take E= 200KN/mm2
(Fig.
20
6)
Section-D
Analysis the Pin jointed plane frame as shown in figure 7. The flexibility for each member is
0.025mm/KN by Force Method?
20
(Fig.7)
Analysis the Pin jointed plane frame as shown in figure 7. The axial stiffness for each
member is 40KN/mm the member (Fig - 6) by Displacement Method?
20
4
(i)
(ii)
(iii)
(iv)
(v)
(vi)
(vii)
(viii)
(ix)
(x)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)
(2)