Professional Documents
Culture Documents
lengthwise
perforation
c/c 25mm
For 14 - 25 mm
or 5/8- 1 tubes
Adapters for tubes with smaller diameters
can be clipped into the jaw.
Using the ETIN clamp when mounting a large number of tubes is especially cost efficient
since they can be mounted on top of each other and the entire width of the tray can be used.
Product details
The patented ETIN Tubing Clamps are manufactured by Oglaend System in Norway.
DNV certificate no. E-7043.
The clamp is made of a stainless steel spring jacket enclosing a flexible plastic jaw.
Adapters for smaller diameters can be fitted into the jaw.
ETIN clamps are manufactured in a Polyamide (PA=Nylon) called AQUAMID 66/6 V0M and acid resistant steel.
The nylon material absorbs noise and vibration.
AQUAMID 66/6 V0M is chemically resistant and hardly influenced by normal temperatures or atmospheric
conditions. It does not contain elemental phosphorus, halogens or heavy metals.
It has a high melting point and is flame-retardant (meets UL94V0). No toxic gasses are emitted during fire.