SPE:CIFICATION FOR BEDD
bocio.:arrzasenso | DEMONSTRATION H2 PSA | our sue: on 12.201
Rev.No : 4 Job No. : A11226 Page : 23 of 47
@ seis evonceane
A hay Engiseting
Pmax suction = Maximum pressure at _ suction vessel bottom
during suction system relieving conditions (as per
5.2.1.1 &52.1.2)
APmax = Pump differential pressure at pump shutoff head with
APm 1.3 x AH x pmax : constant speed pump
A Pmax = 1.1% 1.3x 4H x pmax: variable speed pump
‘A Pmax = 1.3.x AH x pmax: high head multistage pump
APmax 11 x 13 xX SH X pmax : Variable speed, high heed
multistage pump
5.1.2.1.6 For a full liquid system at the discharge of a positive displacement
pump, the mechanical design pressure shall be the higher of
Pass = Patea discharge + 2.0 kglem?
1x Pres discharge
Po
5.1.2.1.7. For centrifugal compressors, the mechanical design pressure shall be
decided as follows;
1) Discharge side mechanical design pressure shall be the higher of;
Pass = Pratas discharge + 2.0 kg/em?
Poss = 1.1 xPraes discharge.
2) The interstaye design pressure shall be the higher of the following in
case of relieving device is not installed;
= Interstage maximum operating pressure,
~ Pressure of kick back flow from the downstream stage,
= Compressor settling out pressure,
3) The interstacie design pressure in case where relieving device is