Professional Documents
Culture Documents
INTERNATIONAL GUARANTEE
We guarantee you J.Bovier against manufacturing defects for one
year from date of purchase. This guarantee will be honored by
authorized J.Bovier dealers if dated and signed copy is submitted
with the J.Bovier watch.
This guarantee does not cover bracelets, crystal, batteries, wear to
the case or moisture damage if the J.bovier watch is non water
resistant model, nor does it apply if there is evidence of misuse or
abuse including defects related to servicing not carried out by the
authorized agents.
WELCOME TO J.BOVIER
J.Bovier Made
The name J.BOVIER guarantees a quality watch movement of the greatest precision. Developed
from advanced technology, the movement is manufactured from the best quality component s and
powered by the long life battery.
The Mechanical J.Bovier Watch
The mechanical JBovier Watch with an automatic movement does not need to be wound by hand.
The motion of your wrist makes the rotor (oscillating weight or mass) turn, thereby winding up the
main spring of the watch movement. The everyday activity of life is sufficient in itself to wind up an
automatic Jaguar watch and it will run continually, even if it is removed at night. However, if not
worn for approximately 40 hours, it will stop. To male the watch work again, turn the crown
clockwise about 20 times. Now set the time and if possible the date etc.
Incidentally, in an automatic watch with a glass back you can see the self-rotating oscillating weight.
Water Resistance of J.Bovier Watches
J.Bovier watches have a water resistant function as engraved on the case back. They are tested and
guaranteed water resistant up to 100 meter or 330 feet of certain professional models. J.Bvoier
watches are suitable for swimming, sailing, sail boarding, surfing and shallow diving.
Sapphire Crystal
J.Bovier watches glasses are fitted with a scratchproof sapphire crystal that is distinguished by its
scratch proofness and reflection free.
Watch Refer:
Date with Three hands
When the crown is pushed back to the normal position, small hand begin to run.
SETTING THE DATE
st
After the date has been set push the crown back to the normal position.
Watch Refer:
Two Hands or Three Hands
When the crown is pushed back to the normal position, small hand begin to run.
SETTING THE DATE
st
After the date has been set push the crown back to the normal position.
Watch Refer:
Date 1/20 Second Chronograph with 3 eyes
Date
Stopwatch
Movement Size
12
Outside Diameter
27.60mm (12H-6H) x 24.00mm (3H-9H)
Casing Diameter
27.00mm (12H-6H)
Height
3.70mm (Include battery)
Battery
SR927SW
Battery Life Approx.
3 years
Battery Life Indicator
When the battery nears its end, the small second hand moves at two-second intervals instead of normal onesecond intervals. In that case, have the battery replaced with a new one as soon as possible.
Note: The watch remains accurate while the small second hand is moving at two-second intervals
st
nd
Pull crown out to the 2 click position when
the second hand is at the 12 oclock position
Note: When the stopwatch is or has been measuring
nd
or stopped, if the crown is pulled out to the 2 click
position, it will automatically reset the stopwatch
hands to 0.
Standard Measurement
A
A
B
Start
Stop
reset
Stop
Restart
Stop
Sprit
Sprit
Release
Stop
Reset
Start
Stop
Restart
Stop
Reset
Reset
nd
Pull the crown out to 2 click position.
Note: When the stopwatch is or has been measuring
or is stopped, if the crwon is pulled out to the
nd
2 click position, it will automatically reset.
Watch Refer:
Retrograde Day Indicator
Movement Size
10 1/2
Outside Diameter
24.00mm:21.50mm (12H-6H) x 21.50mm (3H-9H)
Casing Diameter
23.30mm:21.30mm (12H-6H) x 21.50mm (3H-9H)
Height
3.86mm (Include battery)
Battery
SR920SW
Battery Life Approx.
3 years
Timing of day changes
The date hand move to the next between 11:00 p.m. and 12:00 p.m.
The day hand moves to the next between 2:00 a.m. and 4:00 a.m
nd
Pull crown out to the 2 click position when
the second hand is at the 12 oclock position.
st
Watch Refer:
24hours second with two eyes
Time Setting
Watch Refer:
Date 1/1 Second Chronograph with 3 eyes
When the crown is pushed back to the normal position, small hand begin to run.
SETTING THE DATE
st
After the date has been set push the crown back to the normal position.
The chronograph can be started and stopped each time button A is pressed.
Pressing button B resets the chronograph and the chronograph second hand and chronograph minute hand return
to zero position.
A
A
RESET
TIME MEASUREMENT
B
STOP
A
nd
Pull the cron out to the 2 position.
Press button A to set the chronograph second hand to the zero position. The chronograph hand can be advanced
rapidly by continuously pressing button A.
Once the hand has been zeroed, return the crown to the normal position.
Watch Refer:
Date 1/20 Second Chronograph with
Retrograde Demo
1 Pull the crown out to the 2 click position so that the second hand stops at ZERO position.
nd
When the crown is pushed back to the normal position in synchronization with a time signal, small second hand
begins to run.
SETTING THE DATE
st
After the date has been set push the crown back to the normal position.
The chronograph can be started and stopped each time button A is pressed.
The chronograph 1/20 (1/1) second hand stops at ZERO second position 60 seconds after staring, when button A
is pressed to stop the chronograph, the chronograph 1/20 (1/1) second hand advances rapidly to display the
measured time.
Pressing button B resets the chronograph and all hands return to their ZERO positions.
*Moving of the retrograde chronograph is a demo. Actual measurement will be shown when it stopped/STOP
button is pushed.
A
A
RESET
TIME MEASUREMENT
STOP
B
nd
Pull the crown out to the 2 Click position.
Press button A to set the chronograph second hand to the zero position.
Press button B to set the chronograph 1/20 second hand to zero position.
Once the hands have been zeroed, reset the time and return the crown o its normal position.
Press button B to check that the chronograph hands are reset to zero position.
Watch Refer:
Date with 24 hour Retrograde
When the crown is pushed back to the normal position, small hand begin to run.
SETTING THE DATE
st
After the date has been set push the crown back to the normal position.
ND
SETTING THE 2 TIME (24 HOURS)
After the 2 time (24H) has been set push the crown back to the normal position.
INTERNATIONAL GUARANTEE
CARD