Our Winders are technically advanced winding machines that use AC motors with vector drives. Speed selection is continuously variable as opposed to the fixed range of mechanical gearbox winders. Operator controls are contained within a freestanding pedestal console.
Torque is 2500 ft-lbs
Counter to control the number of turns
Variable Speed 0 20 RPM
Easily maintained technology
Machine can be customized to match each clients requirements.
FLOATING WIRE GUIDE
Safety has become of prime importance in modern coil shops. CAMs winders have wire guides to help place the wire in the precise location on the loop bar. Operators will not have to hold and guide wires with their hands during winding for a safer operation. The guide rollers are arranged to place the stacked wire at the optimum location. Standard unit designed for wire bundles 3/4 x 2. This can be modified for each clients requirements. The Wire Guide can be placed on the floor or attached to the machine (as shown in photos) depending on the length of the loop bar.
Wire guide carriage
TEL: (717) 637-5988 FAX: (717) 637-9329
215 Philadelphia Street, Hanover, PA 17331 USA caminnovation.com custom-taping-machines.com