Professional Documents
Culture Documents
Egant: 800 - 960 MHZ / GSM, NMT, Amps 1710 - 2200 MHZ / GSM, Tdma, Umts
Egant: 800 - 960 MHZ / GSM, NMT, Amps 1710 - 2200 MHZ / GSM, Tdma, Umts
CELLULAR COMPONENTS
Floor 4
Floor 3
Floor 2
Floor 1
RBS 4
RBS 3
RBS 2
RBS 1
Sleek design
Combines up to 4 RBSs into the same
antenna system
The advanced MCM enables you to connect
4 Radio Base Stations. The MCM combines
the signals and equally splits them between
the antenna ports. This is a highly important
function when designing shared antenna systems wishing to connect multiple RBSs to the
shared antennas.
Electrical Specifications
Product number:
Passband:
EG 500 8001
800 - 960 MHz
EG 500 8002
1710 - 2200 MHz
> 25 dB
> 22.0 dB
< 0.3 dB
6.2 + 0.5 dB
100 W
> 25 dB
> 22.0 dB
< 0.3 dB
6.2 + 0.5 dB
100 W
214 x 25 x 110 mm
N (f)
214 x 25 x 110 mm
N (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
ANT
IN / OUT
ANT
ANT
ANT
IN / OUT
IN / OUT
IN / OUT
EGANT
CELLULAR COMPONENTS
4-Way Combiner
800 - 960 MHz / NMT, GSM900
1710 - 2200 MHz / GSM1800, UMTS
Innovative design
The 4-way combiner is a broad band and low
loss product design. It is intentionally designed for low insertion loss and low
intermodulation. There is no need for
terminations or attenuators, which results in
very low insertion loss and outstanding intermodulation performance.
Electrical Specifications
Product number:
Passband:
EG 500 8003
800 - 960 MHz
EG 500 8004
1710 - 2200 MHz
Insertion loss:
< 0.2 dB
< 0.2 dB
Coupling:
> 26.0 dB
> 30 dB (35 dB typ.)
< 107 dBm (150 dBc)
> 26.0 dB
> 30 dB (35 dB typ.)
< 107 dBm (150 dBc)
100 W
3 kW
100 W
3 kW
Impedance in/out:
50 Ohm
50 Ohm
153 x 20 x 153 mm
N (f)
153 x 20 x 153 mm
N (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
ANT1
EGANT
ANT3
ANT2
CELLULAR COMPONENTS
ANT4
RBS 4
RBS 3
RBS 2
RBS 1
Innovative design
Electrical Specifications
Product number:
Passband:
EG 603 0021
880 - 960 MHz, E-GSM900
> 25 dB
> 18.0 dB
6.4 + 0.7 dB
100 W
< - 117 dBm, 160 dBc
50 Ohm
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-30 to +70 C
Relative 5 - 100%
IP65
ANT1
EGANT
ANT3
ANT2
CELLULAR COMPONENTS
ANT4
RBS 4
RBS 3
RBS 2
RBS 1
Innovative design
The 4-way combiner incorporates a broad
band and low loss product design. The 4-way
combiner is designed for low insertion loss
and intermodulation.
There is no need for terminations or attenuators, which results in very low insertion
loss and outstanding intermodulation performance.
Electrical Specifications
Product number:
Passband:
EG 500 8008
376 - 500 MHz, 880 - 960 MHz
EG 603 0014
376 - 500 MHz, 880 - 960 MHz
> 25 dB
> 18.0 dB
6.4 + 0.7 dB
100 W
> 25 dB
> 18.0 dB
6.4 + 0.7 dB
100 W
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any
time without notice.
ANT1
EGANT
ANT3
ANT2
CELLULAR COMPONENTS
ANT4
RBS 1
RBS 2
RBS 3
UMTS
RBS
4
Innovative design
The 4-way combiner is a broad band and low
loss product design. The combiner is specifically designed with low insertion loss and
intermodulation in mind. There is no need for
terminations or attenuators, which results in
very low insertion loss and outstanding intermodulation performance.
Electrical Specifications
Product number:
Passband:
EG 500 8005
800 - 2200 MHz
EG 603 0009
700 - 2700 MHz
> 25 dB
> 20.0 dB
6.4 + 0.7 dB
100 W
> 25 dB
> 18.5.0 dB
6.4 + 0.7 dB
100 W
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
ANT1
EGANT
ANT3
ANT2
CELLULAR COMPONENTS
ANT4
RBS 4
RBS 3
RBS 2
RBS 1
Innovative design
Electrical Specifications
Product number:
Passband:
EG 603 0008
376 - 2200 MHz
> 17.0 dB
Coupling:
6.4 + 1.0 dB
100 W
Impedance in/out:
50 Ohm
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-30 to +70 C
Relative 5 - 100%
IP65
Egant reserves the right to change this product specification at any time
without notice.
EGANT
ANT
CELLULAR COMPONENTS
UMTS
GSM 1800
GSM 900
Reduces cost
By utilizing our triple band combiner you
will reduce the cost of antennas, feeders and
installation.
Electrical Specifications
EG 100 9012
EG 100 9009
Insertion loss:
Port1: GSM900 - ANT
Port2: GSM1800 - ANT
Port3: UMTS - ANT
< 0.20 dB
< 0.30 dB
< 0.45 dB
< 0.40 dB
< 0.45 dB
> 21.0 dB
> 50 dB
> 20.0 dB
> 50 dB
< 200 W
< 200 W
< 100 W
< 200 W
< 100 W
Impedance in/out:
50 Ohm
50 Ohm
Intermodulation:
IM3 2 x 43 dBm:
245 x 210 x 50 mm
7/16 (f)
3.6 kg
-40 to +70 C
Relative 5 - 100%
IP66
-40 to +70 C
Relative 5 - 100%
IP66
Product number:
Passband:
Port1: GSM900
Port2: GSM1800
Port3: UMTS
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
Reduces cost
By utilizing the Egant triple band combiner
you will reduce the cost of antennas, feeders
and installation.
Combines 3 Radio Systems into 1 Antenna Port
This triple band combiner enables the connection of 3 Systems to the combiner:
1 160MHz System
1 TETRA System
1 GSP System
The combiner combines the 3 signals to
1 antenna port, or splits the signal to the 3
Systems in the receiving direction.
This is a highly desirable function when
designing shared antenna systems wishing to
connect multiple Radio Systems to the shared
antennas.
Electrical Specifications
Product number:
Passband:
Port 1: 160MHz
Port 2: TETRA
Port 3: GPS
EG 602 0044
88 - 180 MHz
376 - 495 MHz
1570 - 1580 MHz
Insertion loss:
Port 1: 160MHz - ANT
Port 2: TETRA - ANT
Port 3: GPS - ANT
< 0.9 dB
< 0.9 dB
< 0.5 dB
> 14.0 dB
> 30 dB
10 W
20 W
10 W
Impedance in/out:
50 Ohm
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
350 x 130 x 60 mm
7/16 (f)
3,5 kg
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-40 to +70 C
Relative 5 - 100%
IP65
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
ANT
UMTS
GSM 1800
GSM 900
Reduces cost
By utilizing the Egant triple band combiner
you will reduce the cost of antennas, feeders
and installation.
It eliminates the cost inefficient need to make
one antenna installation for each system. By
simply connecting the RBSs into the combiner it will immediately render you all the
benefits of antenna sharing.
Electrical Specifications
EG 100 9019
EG 100 9020
Insertion loss:
Port1: GSM900 - ANT
Port2: GSM1800 - ANT
Port3: UMTS - ANT
< 1.3 dB
< 1.3 dB
< 1.3 dB
< 1.3 dB
< 1.3 dB
< 1.3 dB
> 16.0 dB
> 30 dB
> 16.0 dB
> 30 dB
20 W
20 W
20 W
20 W
20 W
20 W
Impedance in/out:
50 Ohm
50 Ohm
195 x 130 x 30 mm
SMA (f)
1 kg
195 x 130 x 30 mm
N (f)
1 kg
-40 to +70 C
Relative 5 - 100%
IP65
-40 to +70 C
Relative 5 - 100%
IP65
Product number:
Passband:
Port1: GSM900
Port2: GSM1800
Port3: UMTS
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
ANT
EGANT
CELLULAR COMPONENTS
GSM1800
UMTS
GSM 900
Reduces cost
By utilizing the Egant Dual Band Combiner
you will reduce the cost of antennas, feeders
and installation.
Electrical Specifications
EG 100 9013
EG 100 9014
Insertion loss:
Port1: GSM900
Port2: GSM1800 / UMTS
< 0.15 dB
< 0.25 dB
< 015 dB
< 0.25 dB
> 21.0 dB
> 50 dB
> 21.0 dB
> 50 dB
< 250W
< 150W
< 250W
< 150W
Impedance in/out:
50 Ohm
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
117 x 215 x 50 mm
7/16 (f)
1.5 kg
117 x 215 x 50 mm
N (f)
1.5 kg
-40 to +70 C
Relative 5 - 100%
IP65
-40 to +70 C
Relative 5 - 100%
IP65
Product number:
Passband:
Port1: GSM900
Port2: GSM1800 / UMTS
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
Reduces cost
By utilizing the Egant dual band combiner
you will reduce the cost of antennas, feeders
and installation.
Combines 2 RBSs into 1 Antenna Port
This triple band combiner enables the connection of 2 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station
1 GSM1800 Radio Base Station
The combiner combines the 2 signals to
1 antenna port, or splits the signal to the 2
RBSs in the receiving direction.
This is a highly desirable function when
designing shared antenna systems wishing to
connect multiple RBSs to the shared antennas.
Electrical Specifications
Product number:
Passband:
Port 1: GSM900
Port 2: GSM1800
EG 602 0034
880 - 960 MHz
1710 - 1880 MHz
Insertion loss:
Port 1: GSM900 - ANT
Port 2: GSM1800 - ANT
> 18.0 dB
> 50 dB
> 65.0 dB
100 W
100 W
Impedance in/out:
50 Ohm
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
195 x 185 x 55 mm
7/16 (f)
4 kg
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-40 to +70 C
Relative 5 - 100%
IP65
Egant reserves the right to change this product specification at any time
without notice.
EGANT
ANT
CELLULAR COMPONENTS
GSM 900
TETRA
TETRA / GSM900
68 - 470 MHz / 870 - 970 MHz
Reduces cost
Electrical Specifications
EG 100 9015
EG 100 9016
EG 100 9017
68 - 470 MHz
870 - 970 MHz
68 - 470 MHz
870 - 970 MHz
68 - 470 MHz
870 - 970 MHz
Insertion loss:
Port 1: TETRA
Port 2: GSM900
< 0.1 dB
< 0.3 dB
< 0.1 dB
< 0.3 dB
< 0.1 dB
< 0.3 dB
> 18.0 dB
> 50 dB
> 18.0 dB
> 50 dB
> 18.0 dB
> 50 dB
250 W
250 W
50 Ohm
250 W
250 W
50 Ohm
250 W
250 W
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
128 x 177 x 28 mm
N (f)
2 kg
128 x 177 x 28 mm
7/16 (f)
2.6 kg
128 x 177 x 32
7/16 (f)
2.8 kg
-40 to +70 C
Relative 5 - 100%
IP65
-40 to +70 C
Relative 5 - 100%
IP65
-40 to +70 C
Relative 5 - 100%
IP68
Product number:
Passband:
Port 1: TETRA
Port 2: GSM900
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at
any time without notice.
ANT1
EGANT
CELLULAR COMPONENTS
GSM900
GSM1800
UMTS
GSM 900
TETRA
Reduces cost
By utilizing our dual band combiner you
will reduce the cost of antennas, feeders and
installation.
Electrical Specifications
EG 100 9034
EG 602 0013
68 - 500 MHz
800 - 2500 MHz
68 - 500 MHz
800 - 2500 MHz
Insertion loss:
Port 1: Low band - ANT
Port 2: High band - ANT
< 0.2 dB
< 0.2 dB
< 0.2 dB
< 0.2 dB
> 20.0 dB
> 16.0 dB
> 20.0 dB
> 20.0 dB
> 16.0 dB
> 20.0 dB
> 20.0 dB
> 20.0 dB
> 20.0 dB
> 20.0 dB
> 30 dB
> 50 dB
> 30 dB
> 50 dB
< 300 W
< 500 W
< 300 W
< 500 W
Intermodulation:
IM3, 2 x 43 dBm:
DC by-pass Port 2: UMTS - ANT
Impedance in/out:
50 Ohm
50 Ohm
265 x 55 x 120 mm
7/16 (f)
1.5 kg
265 x 55 x 120 mm
N (f)
1.5 kg
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Product number:
Passband:
Port 1: Low band
Port 2: High band
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
W-LAN
Injector
W-LAN
Access point
376-2170MHz
Save money
The dual band combiner W-LAN offers additional benefits by opening up W-LAN capability to your existing antenna system.
The sleek and easily installed combiner has
a broad-banded spectrum with low insertion
loss and low intermodulation.
Electrical Specifications
EG 100 9018
EG 100 9028
EG 602 0007
68 - 2500 MHz
68 - 2170 MHz
2400 - 2500 MHz
> 18 dB
> 16 dB
> 18 dB
> 16 dB
> 18 dB
> 16 dB
Insertion loss:
Port 2 - Port 1 (ANT):
68 - 2170 MHz:
Port 3 - Port 1 (ANT):
2400 - 2500 MHz:
> 50 dB
> 50 dB
> 50 dB
50 W avg.
0.5 kW peak
50 W avg.
0.5 kW peak
50 W avg.
0.5 kW peak
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
180 x 28 x 140 mm
N (f)
1.6 kg
180 x 32 x 140 mm
7/16 (f)
1.9 kg
180 x 32 x 140 mm
7/16 (f), 7/16 (m), N (f)
1.9 kg
-35 to +70 C
Relative 5 - 100%
IP65
-35 to +70 C
Relative 5 - 100%
IP65
-35 to +70 C
Relative 5 - 100%
IP65
Product number:
Passband:
Port 1:
Port 2:
Port 3:
Input return loss:
68 - 2170 MHz:
2400 - 2500 MHz:
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
ANT
CELLULAR COMPONENTS
UMTS
TETRA
Reduces cost
By utilizing our dual band combiner you
will reduce the cost of antennas, feeders and
installation.
Electrical Specifications
EG 602 0045
EG 602 0046
Insertion loss:
Port 1: Low band - ANT
Port 2: High band - ANT
< 0.3 dB
< 0.3 dB
< 0.3 dB
< 0.3 dB
> 18.0 dB
> 18.0 dB
> 18.0 dB
> 18.0 dB
> 30 dB
> 50 dB
> 30 dB
> 50 dB
< 300 W
< 500 W
< 300 W
< 500 W
Intermodulation:
IM3, 2 x 43 dBm:
DC by-pass Port 2: UMTS - ANT
Impedance in/out:
50 Ohm
50 Ohm
242 x 31 x 84 mm
N (f)
1.5 kg
242 x 31 x 84 mm
7/16 (f)
1.5 kg
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Product number:
Passband:
Port 1: Low band
Port 2: High band
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
Technical Specifications for the FM + VHF + DAB / TETRA Dual Band Combiner
Below are some typical data. For more detailed information, please contact us.
Electrical Specifications
EG 602 0029
EG 602 0030
EG 602 0038
88 - 240 MHz
376 - 480 MHz
88 - 240 MHz
376 - 480 MHz
88 - 240 MHz
376 - 480 MHz
Insertion loss:
Port 1: 88 - 108 MHz
Port 1: 108 - 174 MHz
Port 1: 174 - 240 MHz
Port 2: TETRA
< 0.3 dB
< 0.3 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
< 0.5 dB
> 18.0 dB
> 18.0 dB
> 18.0 dB
> 50 dB
> 50 dB
> 40 dB
> 40 dB
> 40 dB
> 40 dB
< 100 W
< 100 W
50 Ohm
Port 1 - Ant
< 20 W
< 20 W
50 Ohm
Port1 - Ant
< 20 W
< 20 W
50 Ohm
Port1 - Ant
250 x 80 x 37 mm
7/16 (f)
2.9 kg
IP67
118 x 119 x 37 mm
7/16 (f)
1.7 kg
IP67
110 x 115 x 37 mm
7/16 (f)
1.4 kg
Indoor use
Product number:
Passband:
Port 1: FM + VHF + DAB
Port 2: TETRA
EGANT
CELLULAR COMPONENTS
RY
A
N
MI
L
PRE
Reduces cost
By utilizing the Egant Dual Band Combiner
you will reduce the cost of antennas, feeders
and installation.
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connection of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System
1 TETRA Public Services System
The Combiner combines the 2 signals to
1 antenna port, or splits the signal to the 2
RBSs in the receiving direction.
This is a highly desirable function when
designing shared antenna systems wishing to
connect multiple RBSs to the shared antennas.
Electrical Specifications
EG 602 0023
EG 602 0024
Insertion loss:
Port 1: TETRA - Public Safety
Port 2: TETRA - Public Services
< 1.2 dB
< 1.2 dB
< 1.2 dB
< 1.2 dB
> 18.0 dB
> 65 dB
> 18.0 dB
> 65 dB
< 60W
< 60W
< 60W
< 60W
Impedance in/out:
50 Ohm
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
-40 to +70 C
Indoor
-40 to +70 C
Indoor
Product number:
Passband:
Port 1: TETRA - Public Safety
Port 2: TETRA - Public Services
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
RY
A
N
I
PRE
LIM
EGANT
CELLULAR COMPONENTS
Reduces cost
By utilizing the Egant Dual Band Combiner
you will reduce the cost of antennas, feeders
and installation.
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connection of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System
1 TETRA Public Services System
The Combiner combines the 2 signals to
1 antenna port, or splits the signal to the 2
RBSs in the receiving direction.
This is a highly desirable function when
designing shared antenna systems wishing to
connect multiple RBSs to the shared antennas.
Electrical Specifications
EG 602 0023
EG 602 0024
Insertion loss:
Port 1: TETRA - Public Safety
Port 2: TETRA - Public Services
< 1.2 dB
< 1.2 dB
< 1.2 dB
< 1.2 dB
> 18.0 dB
> 50 dB
> 18.0 dB
> 50 dB
< 60W
< 60W
< 60W
< 60W
Impedance in/out:
50 Ohm
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
-40 to +70 C
Indoor
-40 to +70 C
Indoor
Product number:
Passband:
Port 1: TETRA - Public Safety
Port 2: TETRA - Public Services
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
Duplexer TETRA
380 - 385 MHz
390 - 395 MHz
Y
R
A
N
I
M
PR
I
L
E
Electrical Specifications
Product number:
Passband:
Port 1: RX
Port 2: TX
EG 602 0020
EG 602 0021
Insertion loss:
< 1.5 dB
< 0.8 dB
> 20.0 dB
> 65 dB
> 20.0 dB
> 65 dB
200 W
200 W
Impedance in/out:
50 Ohm
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
-40 to +70 C
Relative 5 - 100%
Indoor use
-40 to +70 C
Relative 5 - 100%
Indoor use
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
MI
L
RE
RY
A
N
Duplexer TETRA
380 - 385 MHz
390 - 395 MHz
415 - 420 MHz
425 - 430 MHz
Electrical Specifications
Product number:
Passband:
Port 1: RX
Port 2: TX
EG 602 0020
EG 602 0021
EG 602 0037
Insertion loss:
< 1.5 dB
< 0.8 dB
> 20.0 dB
> 65 dB
> 20.0 dB
> 65 dB
> 20.0 dB
> 75 dB
200 W
200 W
80 W
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
Intermodulation:
IM3, 2 x 43 dBm:
Monitoring port:
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
240 x 240 x 80 mm
SMA
3 kg
-40 to +70 C
Relative 5 - 100%
Indoor use
-40 to +70 C
Relative 5 - 100%
Indoor use
-10 to +60 C
Relative 5 - 100%
Indoor use
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product
specification at any time without notice.
EGANT
CELLULAR COMPONENTS
Electrical Specifications
Product number:
Passband:
Insertion loss:
Port 1 - Ant 1: 890 - 915 MHz
Port 1 - Ant 2: 890 - 915 MHz
Port 2 - Ant 1: 935 - 960 MHz
Port 2 - Ant 2: 935 - 960 MHz
EG 100 9032
890 - 915, 935 - 960 MHz
< 1.5 dB
< 1.5 dB
< 7.8 dB
< 7.8 dB
(0.9 dB typ)
(0.9 dB typ)
(7.1 dB typ 6 dB coupling)
(7.1 dB typ 6 dB coupling)
Phase difference:
Port 1 - Ant 1: 890 - 915 MHz
Port 1 - Ant 2: 890 - 915 MHz
Port 1 - Ant 1: 935 - 960 MHz
Port 1 - Ant 2: 935 - 960 MHz
Port 2 - Ant 1: 935 - 960 MHz
Port 2 - Ant 2: 935 - 960 MHz
0
0
- 90 + 3 (+ 1 typ)
- 90 + 3 (+ 1 typ)
0 + 3 (+ 1 typ)
0 + 3 (+ 1 typ)
> 18.0 dB
> 30 dB
2 x 35 W
50 Ohm
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-30 to +70 C
Relative 5 - 100%
IP68
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
ANT2
RBS 2
RBS 1
Innovative design
Combines up to 2 repeaters or RBSs
into the same antenna system
The 3 dB combiner enables the connection of
2 repeaters or radio base stations. The combiner combines the signal and equally splits
the signals between the antenna ports. This
is a highly desirable function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared
antennas.
The 3 dB combiner is designed for low insertion loss and low intermodulation.
There is no need for terminations or attenuators, which results in very low insertion loss
and outstanding intermodulation perfomance.
EG 699 0006
Bracket for EGANT Cellular Components
combiner.
Electrical Specifications
Product number:
Passband:
EG 500 8017
376 - 500 MHz, 880 - 960 MHz
EG 500 8018
376 - 500 MHz, 880 - 960 MHz
< - 97 dBm
50 Ohm
< - 97 dBm
50 Ohm
190 x 25 x 82 mm
N (f)
190 x 42 x 82 mm
7/16 (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at
any time without notice.
Out 1 + 2
Out 1 + 2
In 2
In 1
EGANT
CELLULAR COMPONENTS
ANT1
ANT2
RBS 2
RBS 1
Innovative design
The 3dB combiner incorporates a broad band
and low loss design. It is specifically designed
with low insertion loss and intermodulation
in mind. There is no need for terminations or
attenuators, which results in very low insertion loss and outstanding intermodulation
performance.
Combines up to 2 repeaters or RBSs
into the same antenna system
The 3 dB combiner enables the connection of
2 repeaters or radio base stations. The combiner combines the signal and equally splits
the signals between the antenna ports. This is
a highly important function when
designing shared antenna systems wishing
to connect multiple repeaters or RBSs to the
shared antennas.
Electrical Specifications
Product number:
Passband:
EG 603 0030
376 - 2200 MHz
EG 603 0031
376 - 2200 MHz
> 20.0 dB
> 18.0 dB
3.1 + 0.2 dB
200 W
> 20.0 dB
> 18.0 dB
3.1 + 0.2 dB
200 W
< - 97 dBm
50 Ohm
< - 97 dBm
50 Ohm
215 x 26 x 115 mm
N (f)
215 x 26 x 115 mm
7/16 (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at
any time without notice.
EGANT
CELLULAR COMPONENTS
ANT2
RBS 1
RBS 2
Innovative design
Electrical Specifications
Product number:
Passband:
EG 500 8010
700 - 2700 MHz
EG 500 8011
700 - 2700 MHz
> 30 dB
> 22.0 dB
3.1 + 0.3 dB
240 W
> 30 dB
> 22.0 dB
3.1 + 0.3 dB
240 W
135 x 45 x 80 mm
7/16 (f)
135 x 45 x 80 mm
N (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at
any time without notice.
Out 1 + 2
Out 1 + 2
In 2
In 1
EGANT
CELLULAR COMPONENTS
ANT1
ANT2
3 dB Combiner
68 - 79 MHz
RBS 1
RBS 2
Innovative design
EG 699 0006
Bracket for EGANT Cellular
Components combiner.
Electrical Specifications
Product number:
Passband:
EG 603 0001
68 - 79 MHz
> 30 dB
> 20.0 dB
Coupling:
3.1 + 0.2 dB
120 W
Impedance in/out:
50 Ohm
Mechanical Specifications
190 x 25 x 82 mm
N (f)
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
-30 to +70 C
Relative 5 - 100%
IP65
Installation bracket:
Material:
EG 699 0006
Aluminum Zinc
Egant reserves the right to change this product specification at any time without notice.
Out 1 + 2
In 1
Out 1 + 2
In 2
EGANT
CELLULAR COMPONENTS
2-Way Combiner
376 - 500 MHz
800 - 2170 MHz
TETRA, GSM900, GSM1800, DCS, UMTS
Innovative design
This 2-way combiner incorporates a broad
band and low loss product design. It is designed for low insertion loss and intermodulation.
ANT
Cable loss
100%
3dB, 50%
4.7 dB
RBS 1
RBS 2
Electrical Specifications
Product number:
Passband:
EG 100 9204
800 - 2170 MHz
EG 100 9206
800 - 2170 MHz
EG 100 9207
800 - 2170 MHz
EG 100 9210
800 - 2170 MHz
> 30 dB
> 20.0 dB
1.8 + 0.3 dB
4.7 + 0.3 dB
> 30 dB
> 20.0 dB
1.2 + 0.3 dB
6.0 + 0.3 dB
> 30 dB
> 20.0 dB
1.1 + 0.15 dB
7.0 + 0.15 dB
> 30 dB
> 20.0 dB
1.0 + 0.3 dB
10.0 + 0.3 dB
500 W
500 W
500 W
500 W
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
Product number:
Passband:
EG 100 9304
376 - 500 MHz
EG 100 9306
376 - 500 MHz
EG 100 9307
376 - 500 MHz
EG 100 9310
376 - 500 MHz
> 30 dB
> 20.0 dB
1.8 + 0.2 dB
4.7 + 0.4 dB
> 30 dB
> 20.0 dB
1.2 + 0.2 dB
6.0 + 0.4 dB
> 30 dB
> 20.0 dB
1.1 + 0.2 dB
7.0 + 0.4 dB
> 30 dB
> 20.0 dB
1.0 + 0.2 dB
10.0 + 0.4 dB
500 W
500 W
500 W
500 W
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
140 x 80 x 40 mm
N (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Impedance in/out:
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Electrical Specifications
Impedance in/out:
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Installation support
Installation bracket: EG 699 0007
(Order separately)
EGANT
CELLULAR COMPONENTS
2-Way Combiner
376 - 500 MHz
800 - 2170 MHz
TETRA, GSM900, GSM1800, DCS, UMTS
Innovative design
ANT
Cable loss
100%
3 dB, 50%
4.7 dB
RBS 1
RBS 2
Electrical Specifications
Product number:
Passband:
EG 100 9004
800 - 2170 MHz
EG 100 9006
800 - 2170 MHz
EG 100 9010
800 - 2170 MHz
> 30 dB
> 20.0 dB
1.8 + 0.3 dB
4.7 + 0.3 dB
> 30 dB
> 20.0 dB
1.2 + 0.3 dB
6.0 + 0.3 dB
> 30 dB
> 20.0 dB
1.0 + 0.3 dB
10.0 + 0.3 dB
70 W
70 W
70 W
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
140 x 80 x 40 mm
7/16 (f)
140 x 80 x 40 mm
7/16 (f)
140 x 80 x 40 mm
7/16 (f)
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
Product number:
Passband:
EG 100 9104
376 - 500 MHz
EG 100 9106
376 - 500 MHz
EG 100 9110
376 - 500 MHz
> 30 dB
> 20.0 dB
1.8 + 0.15 dB
4.7 + 0.15 dB
> 30 dB
> 20.0 dB
1.2 + 0.15 dB
6.0 + 0.15 dB
> 30 dB
> 20.0 dB
1.0 + 0.15 dB
10.0 + 0.15 dB
70 W
70 W
70 W
Impedance in/out:
50 Ohm
50 Ohm
50 Ohm
140 x 80 x 40 mm
7/16 (f)
140 x 80 x 40 mm
7/16 (f)
140 x 80 x 40 mm
7/16 (f)
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
-30 to +70 C
Relative 5 - 100%
IP68
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Electrical Specifications
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Installation support
Installation bracket: EG 699 0007
(Order separately)
Egant reserves the right to change this product specification at any time without notice.
EGANT
CELLULAR COMPONENTS
Innovative design
The 3x3 combiner is a broad band and low
loss product design. It is intentionally designed for low insertion loss and low
intermodulation.
Electrical Specifications
Product number:
Passband:
EG 603 0039
700 - 2700 MHz
EG 603 0040
700 - 2700 MHz
> 20.0 dB
> 25 dB (30 dB typ.)
< 107 dBm (150 dBc)
> 20.0 dB
> 23 dB (28 dB typ.)
< 107 dBm (150 dBc)
60 W
3 kW
60 W
3 kW
Impedance in/out:
50 Ohm
50 Ohm
204 x 32 x 140 mm
7/16 (f)
1.6 kg
204 x 25 x 140 mm
N (f)
1.4 kg
-35 to +65 C
Relative 5 - 100%
IP67
-35 to +65 C
Relative 5 - 100%
IP67
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
Weight:
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Egant reserves the right to change this product specification at any time
without notice.
EGANT
CELLULAR COMPONENTS
2-Way Combiner
800 - 2170 MHz
GSM 900, GSM 1800, PCS, UMTS
Innovative design
This 2-way combiner incorporates a broad
band and low loss product design. It is designed for low insertion loss and intermodulation.
ANT
Cable loss
100%
3dB, 50%
4.7dB
RBS 1
RBS 2
Electrical Specifications
Product number:
Passband:
EG 603 0011
800 - 2170 MHz
EG 603 0012
800 - 2170 MHz
EG 603 0013
800 - 2170 MHz
> 30 dB
> 20.0 dB
1.8 + 0.3 dB
4.7 + 0.3 dB
> 30 dB
> 20.0 dB
1.2 + 0.3 dB
6.0 + 0.3 dB
> 30 dB
> 20.0 dB
1.0 + 0.3 dB
10.0 + 0.3 dB
70 W
70 W
70 W
140 x 80 x 40 mm
140 x 80 x 40 mm
140 x 80 x 40 mm
7/16 (m)
7/16 (f)
N (f)
7/16 (m)
7/16 (f)
N (f)
7/16 (m)
7/16 (f)
N (f)
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
-30 to +70 C
Relative 5 - 100%
IP65
Mechanical Specifications
Dimensions (W x H x D):
Connectors:
J1:
J2:
J3 - J4 (coupled port):
Environmental Specifications
Temp. range (normal operation):
Humidity:
Sealing:
Installation support
Installation bracket: EG 699 0007
(Order separately)
J4, N (f)
J3, N (f)
J1, 7/16 (m)
EGANT
CELLULAR COMPONENTS
Save money
Our brackets are optimized for Power Tappers, Power Splitters, Combiners and Couplers. When opting for quick and easy installation, make sure to use our tailor made
stainless steel or aluzinc brackets.
EG 300 0307
EG 699 0005
Dimensions (W x H x D):
Weight:
Material:
30 x 77 x 80 mm
0.2 kg
Stainless steel A4
30 x 77 x 80 mm
0.2 kg
Aluzinc
80 x 60 x 30 mm
0.15 kg
Aluzinc
Product number:
EG 699 0006
EG 699 0007
330 x 15 x 35 mm
0.3 kg
Aluzinc
257 x 15 x 35 mm
0.2 kg
Aluzinc
Product number:
Mechanical Specifications
Mechanical Specifications
Dimensions (W x H x D):
Weight:
Material:
EG 699 0006
Bracket for Egant combiners
EG 699 0007
Bracket for Egant cellular couplers
EG 699 0005
Bracket for Egant splitters/tappers (N)
EG 300 0306, EG 300 0307
Bracket for Egant splitters/tappers (7/16)
Egant reserves the right to change this product specification at any time
without notice.