You are on page 1of 6

PIM Switchover

Configuring PIM Sparse mode


ip multicast-routing
Interface Ethernet 0
ip address 1.1.1.1 255.255.0.0
ip pim sparse-mode
Interface Ethernet 1
ip address 2.2.2.2 255.255.0.0
ip pim sparse-mode
Interface serial 0
ip address 192.1.1.1 255.255.255.252
ip pim sparse-mode
ip pim rp-address 3.3.3.3

Even the RP must have the ip pim rp-address configured pointing at


Unicast Routing Table must know how to reach RP

You might also like