2. For the cantilever sheet pile wall shown below, compute the depth of embedment of sheet pile.
TN ZL. !”~<“—sstS
3m y= 2vm = 30°
— 3m
7xSN
When #= 30°, Ka= 1/3
Consider 1m length of the wall. Total active pressure p,-
Pacts horizontally at a height of 2m from the heel.
For no tension to develop at the base, the resultant of P, and the weight of wall intersects
the base at a distance of 2b/3 from the heel. For taking moments the section of the wall
may be divided into a rectangle of height 6m and width 1.4m (top width) and a triangle of
height 6m and base width (b ~ 1.4) metres. The moments of the forces are taken about the heel.
From the moment equation we get, b = 2.77m
Total weight W of the wall per metre length = 1.4 x 2.77x6x2/2=23.27t
The factor of safety F against sliding is given as follows:
Won 5' 23.27 tan 30°
F = ——— = ————= 1,39
P 9.6