BTS(C) —1 & H- 10 -023-C
Time: 1 12 Hours
In.
B. Tech Degree I &II Semester (Combined) Examination
oP
se
oe
oP
oP
June 2010
TT/CS/EC/CE/ME/SE/EB/EVEE/FT 106 BASIC CIVIL AND
MECHANICAL ENGINEERING
(B) MECHANICAL ENGINEERING
(2006 Scheme)
Maximum Marks: 50
PART A
(Answer ALL questions)
(4x 5=20)
Explain the processes in a camot cycle on a PV diagram.
State and explain second law of thermodynamics.
Explain the process of soldering and brazing. What are the soldering and brazing materials
used?
Explain the working of a fuel pump with a neat figure.
PARTB
(2x 15= 30)
Explain the working of vapour compression refrigeration system with a neat figure. (7)
Determine the volume of 2 kg. of air at 30°C and under a pressure of 2 bar. What
would be its volume after isothermal compression to a pressure of 4 bar. Also
calculate the work done. ®)
OR
Explain the different types of compounding of turbines with neat figures. (7)
0.2 m’ of air at 1 bar and 100°C is compressed adiabatically to 0.05 m°. Determine
the mass of air compressed (ii) final pressure and temperature of air
increase in internal energy. Take R=287 J/kgK. (8)
Derive an expression to determine the length of belt in an open belt drive. ”
Explain the working of a four stroke cycle petrol engine with neat figures. (8)
; OR
Explain the different methods of arc welding with neat figures. (7)
Explain the working of cooling and lubricating systems in an IC engine. (8)