Professional Documents
Culture Documents
Page 1 of 3
Shutdown SIS
Previous Screen
Product: MINI HYD EXCAVATOR
Model: 301.8 MINI HYD EXCAVATOR BFA
Configuration: 301.5 301.6 301.8 Mini Hydraulic Excavator BFA00001-UP (MACHINE) POWERED BY 3003 Engine
i01337856
Removal Procedure
Start By:
A. Remove the cab. Refer to Disassembly and Assembly, RENR2808, "Cab - Remove".
B. Remove the operator's seat. Refer to Disassembly and Assembly, RENR2808, "Seat - Remove
and Install".
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses, and all tubes. Plugs help to prevent fluid loss and
contamination.
Illustration 1
g00707526
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/1/2010
301.5 301.6 301.8 Mini Hydraulic Excavator BFA00001-UP (MACHINE) POWERED B... Page 2 of 3
Illustration 2
g00707528
Installation Procedure
Illustration 3
g00707528
1. Install the pilot and travel speed manifold (5) in the machine.
2. Install four bolts (4) and washers.
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/1/2010
301.5 301.6 301.8 Mini Hydraulic Excavator BFA00001-UP (MACHINE) POWERED B... Page 3 of 3
Illustration 4
g00707526
https://sisweb.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/si... 10/1/2010