Professional Documents
Culture Documents
1. Find the unknown voltages in the circuit shown in Figure A below. Find Vl first.
10 V
+
V2
_
8V
V1
_
_
V1
9V
+
Figure A
2. A resistor in series with an 8- resistor absorbs 100 W when the two are connected across a
60-V line. Find the unknown resistance R.
3. In the circuit shown in Figure B, find the total resistance RT with terminals a and b (a)
open-circuited, and (b) short-circuited.
40
90
RT
60
b
10
Figure B
4. Use current division twice to find I1 in the circuit shown in Figure C.
36 A
20
I2
I1
Figure C
5. Find the Thevenin equivalent circuit for a dc power supply that has a 30-V terminal voltage
when delivering a 400 mA and a 27-V terminal voltage when delivering 600 mA.
6.
What resistor draws a current of 5 A when connected across terminals a and b of the circuit
shown in Figure D?
5
100 V
20
Figure D
7. At t = 0 s, a 100-V source is switched in series with a 1-k resistor and an uncharged 2-F
capacitor. What are (a) the initial capacitor voltage, (b) the initial current, (c) the initial
Page 2 of 4
rate of capacitor voltage increase, and (d) the time required for the capacitor voltage to
reach its maximum value?
8. Using ideal diodes, resistors, and batteries, synthesize a function-generator circuit that will
yield the i-v characteristic of Figure E.
i, mA
7.5
2.5
-5
10
20
Figure E
9. Use loop analysis to find the current down through the 8- resistor in the circuit shown in
Figure F
10
I2
8
7A
I1
7A
8V
6V
Figure F
10. In the circuit of Figure G, vs is a 10-V square wave of period 4 ms, R = 100, and C = 20 F.
Page 3 of 4
Sketch vc for the first two cycles of vs if the capacitor is initially uncharged and the diode is
ideal.
iD
R
D
+
vc
vs
_
C
Figure G
Page 4 of 4