You are on page 1of 1

Things You Require

1)CWM File
LINK
2)ODIN 3-1.87
LINK
3)Galaxy Core Drivers
LINK
Attention Before Flashing
1)Make Sure Battery Is ABOVE 30%
2)DON'T UNPLUG the Cable During Flashing
3)Follow Procedure Carefully Flashing Right Files
4)No Nuclear War Is Going On :P
5)Any Other Problem PM me
PROCEDURE
1. Install the Galaxy Core Drivers On Your Desktop
2. Extract ODIN.zip on your Desktop
3. Copy Recovery.tar File In ODIN Folder(its preferable to keep them in the same
directory)
4. Now Go To Your Phone Settings
5. Click On Developer Options & Tick USB Debugging
6. Turn Off Your Phone
7. After Your Mobile Is Completely Turned Off Go Into Downloading Mode - Press &
Hold Volume Down +Home Key +Power Key, Press Volume Up Again To Proceed
8. Connect Your Phone To Your PC via USB Cable
9. Now Open ODIN 3.07
10. Your Phone Should Be Detected In ODIN If You Have Installed The Drivers Corr
ectly
11. Now Click On The PDA Button Then Select recovery.tar(CWM Recovery File)
12. Press The Start Button. Now The Installation Should Start.
13. When The Installation Is Completed It Should Display "PASS" Then Remove The
USB Cable From Your Device
14. Now To Go Into CWM Recovery - Turn Off Your Phone Completely.
15. Press Power Button + Home Button + Volume Down Button.
16. Now You Have A CWM Recovery!!!!!!!!!!!!!!

You might also like