Professional Documents
Culture Documents
The duration of the test should be one (1) hour per modulation for 64QAM Maximum Gain and
256QAM Maximum Throughput
The TX setting of the Ethernet tester should be 10% lower than the expected L1 throughput of link
at 64QAM Max Gain and 256QAM Max Throughput.
5.1
Jitter (ms)
Pass/Fail
Jitter (ms)
Pass/Fail
5.2
2. VLAN & QOS testing ( The below can be achieved with one tester per site if it
has mulitistreaming)
6.0
Description:
To demonstrate L1LA in one DAC GE3 card with VLAN Tagged traffic (With QoS) coming from two Ethernet
testers per site
To demonstrate that traffic with a higher priority will be diverted to the remaining link and will be allotted