You are on page 1of 170

790 2500 MHz

Base Station Antennas


for Mobile Communications

Photo on title page: Three sector arrangement with panel antenna for UMTS in combination
with RCU (Remote Control Unit) and TMA.
Catalogue Issue 01/03
All data published in previous catalog issues hereby becomes invalid.
We reserve the right to make alterations in accordance with the requirements of our customers,
therefore for binding datas please check valid datasheets!

Please note:
As a result of more stringent legal regulations
and judgements regarding product liability, we are
obliged to point out certain risks that may arise
when products are used under extraordinary
operating conditions.

The mechanical design is based on the environmental


conditions as stipulated in ETS 300 019-1-4, which
include the static mechanical load imposed on an
antenna by wind at maximum velocity.
Extraordinary operating conditions, such as heavy
icing or exceptional dynamic stress (e.g. strain caused
by oscillating support structures), may result in the
breakage of an antenna or even cause it to fall to
the ground.
These facts must be considered during the site planning
process.

The details given in our data sheets have to be


followed carefully when installing the antennas and
accessories.
In addition, please use our information brochure
about mounting configurations.
The installation team must be properly qualified
and also be familiar with the relevant national safety
regulations.

Quality leads the way


Being the oldest and largest antenna manufacturer worldwide, we take on every day
the challenge arising from our own motto. One of our basic principles is to look always
for the best solution in order to satisfy our customers.
Our quality assurance system conforms to DIN EN ISO 9001 and applies to the product
range of the company: Antenna systems, communication products as well as active
and passive distribution equipment.

Directional Antennas
Dual Polarization + 45/ 45

800/900 MHz

Directional Antennas
Dual Polarization + 45/ 45

1800/1900/2000 MHz

Directional Antennas
Dual-band, Dual Polarization + 45/ 45
Dual-band, Vertical Polarization

900/1800/2000 MHz
800/900/1800/2000 MHz

Directional Antennas
Dual Polarization + 45/ 45

UMTS (IMT 2000)

Vertical Polarization

UMTS (IMT 2000)

Directional Antennas
Vertical Polarization

800/900 MHz

Vertical Polarization

1800/1900 MHz

Omnidirectional Antennas
Vertical Polarization

800/900/1800/2000 MHz

Dual-band, Vertical Polarization

900/1800/2000 MHz

Indoor Antennas
Multi-band

800/1900/2000 MHz

Indoor / Outdoor

900/1800/2000 MHz

Power Splitters and Tappers


Accessories
General Information
3

Summary Directional Antennas


Dual Polarization + 45/ 45
800/900
Dual Polarization + 45/ 45
Type

Type No.

Height
[mm]

741 717
800 10141
741 785

656
1296
2580

XPol A-Panel
XPol A-Panel
XPol A-Panel

870960
806960
870960

30
30
30

15.5dBi
18.5dBi
21dBi

XPol A-Panel

806960

65

9dBi

739 619

XPol A-Panel

806960

65

12.5dBi

739 620

XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel

806960
806960
806960
806960

65
65
65
65

15.5dBi
15dBi
15dBi
15dBi

6T
12T
014T

739
739
739
739

XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel

806960
806960
824960
824960

65
65
65
65

17dBi
17dBi
17dBi
16.5dBi

6T
9T
010T

XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel

870960
806960
806960
806960
806960

65
65
65
65
65

18dBi
18dBi
18dBi
18dBi
17.5dBi

6T
9T
07T

XPol A-Panel
XPol A-Panel
XPol A-Panel

806960
806960
824960

90
90
88

13.5dBi
13.5dBi
13.5dBi

XPol A-Panel
XPol A-Panel
XPol A-Panel
XPol A-Panel

870960
806960
806960
806960

90
90
90
88

XPol A-Panel
XPol A-Panel
XPol A-Panel

806960
806960
806960

90
90
88

Connector
position

Page

bottom
bottom
bottom

6
6
7

256

bottom or top

656

bottom or top

622
632
633
684

1296
1296
1296
1296

bottom or top
bottom
bottom
bottom

9
9
10
11

739
739
741
739

623
634
622
685

1936
1936
1936
1996

bottom or top
bottom
bottom
bottom

12
12
13
14

739
739
739
739
739

630
624
636
637
686

2580
2580
2580
2580
2580

bottom or top
bottom or top
bottom
bottom
bottom

15
15
16
16
17

6T
014T

739 648
739 658
739 664

1296
1296
1296

bottom or top
bottom
bottom

18
18
19

15.5dBi
15.5dBi
15.5dBi
15dBi

6T
010T

739
739
739
739

655
649
660
665

1936
1936
1936
1996

bottom or top
bottom or top
bottom
bottom

20
21
21
22

17dBi
17dBi
16dBi

6T
07T

739 650
739 662
739 666

2580
2580
2580

bottom or top
bottom
bottom

23
23
24

New Products

A-Panel
Dual Polarization
Half-power Beam Width

800/900
X
30

XPol A-Panel 870960 30 15.5dBi


Type No.

741 717

Frequency range

870 960 MHz

Polarization

+45, 45

Gain

2 x 15.5 dBi

30

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance

50

VSWR

< 1.5

30
27

dB

10

Half-power beam width


Copolar +45/ 45

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

27

2 x 7-16 female

Connector position

10

Bottom
3

Weight

dB

Input

13 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


330 N / 60 N / 470 N

Max. wind velocity

200 km/h

Height/width/depth

656 / 560 / 116 mm

Vertical Pattern

800/900
45

800/900
+45

7-16

7-16

XPol A-Panel 806960 30 18.5dBi

800 10141

Frequency range

806960
880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 18 dBi

2 x 18.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

31
15

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 24 dB

> 24 dB

Isolation

> 30 dB

> 30 dB

Impedance

50

50

VSWR

< 1.5

< 1.5

29
14

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

29

10

dB

806 894 MHz

Horizontal Pattern

14

10

2 x 7-16 female
Bottom
approx. 22 kg
Frontal / Lateral / Rearside:
680 N / 130 N / 970 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 560 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 143)

dB

Type No.

Vertical Pattern

A-Panel
Dual Polarization
Half-power Beam Width

870 960
X
30

XPol A-Panel 870960 30 21dBi


Type No.

741 785

Frequency range

870 960 MHz

Polarization

+45, 45

Gain

2 x 21 dBi

30

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance

50

VSWR

< 1.5

30
7

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

Input
Connector position

2 x 7-16 female

3
0

Horizontal Pattern

7
10

Bottom
3

Weight

dB

Horizontal:
Vertical:

dB

10

Half-power beam width


Copolar +45/ 45

40 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


1460 N / 280 N / 2090 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 560 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 143)

Vertical Pattern

870960
45

870960
+45

7-16

7-16

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
65

XPol A-Panel 806960 65 9dBi

739 619

Frequency range
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 8.5 dBi

2 x 9 dBi

Horizontal:
Vertical:

Front-to-back ratio, copolar


Cross polar ratio
Maindirection
Sector

0
60

70
70

Horizontal:
Vertical:

10

65
68

> 27 dB

> 27 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Isolation

Horizontal Pattern

> 30 dB

Impedance

50

VSWR

< 1.5

68

10

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

350 W (at 50 C ambient temperature)

Input

2 x 7-16 female

Connector position

Vertical Pattern

Bottom or top

Weight
Wind load (at 150 km/h)

dB

Half-power beam width


Copolar +45/ 45

65

125

806960

dB

Type No.

3 kg
Frontal / Lateral / Rearside:
40 N / 25 N / 90 N

Max. wind velocity

200 km/h

Height/width/depth

256 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 65 12.5dBi

739 620

Frequency range

120

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 12 dBi

2 x 12.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

68
29

Horizontal:
Vertical:

65
27

65

10

dB

Type No.

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

27

10

2 x 7-16 female
Bottom or top
6 kg
Frontal / Lateral / Rearside:
110 N / 60 N / 240 N

Max. wind velocity

200 km/h

Height/width/depth

656 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Horizontal Pattern

Vertical Pattern

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
65

XPol A-Panel 806960 65 15.5dBi

739 622

Frequency range
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 15.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65

120

806960

68
16

Horizontal:
Vertical:

65
15

10

dB

Type No.

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Horizontal Pattern

50

Impedance
VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Connector position

Bottom or top

Weight
Wind load (at 150 km/h)

10

2 x 7-16 female
dB

Input

15

10 kg

Vertical Pattern

Frontal / Lateral / Rearside:


230 N / 130 N / 500 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 262 / 116 mm


806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 65 15dBi 6T

739 632

Frequency range

120

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 14.5 dBi

2 x 15 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

68
16

Horizontal:
Vertical:

65
15

65

10

dB

Type No.

6, fixed

6, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

16 dB

Front-to-back ratio, copolar

> 28 dB

> 30 dB

Isolation

> 30 dB

> 32 dB

Impedance

50

50

VSWR

< 1.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

15

10

2 x 7-16 female

dB

Electrical tilt

Vertical Pattern
6 electrical downtilt

Bottom
8 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
65

XPol A-Panel 806960 65 15dBi 12T

739 633

Frequency range
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 14.5 dBi

2 x 15 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

68
17

65

120

806960

Horizontal:
Vertical:

65
16

10

dB

Type No.

Sidelobe suppression for


first sidelobe above horizon

12, fixed

12, fixed

14 dB

16 dB

Front-to-back ratio, copolar

> 28 dB

> 30 dB

Isolation

> 30 dB

> 30 dB

Impedance

50

50

VSWR

< 1.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

16
10

2 x 7-16 female

dB

Electrical tilt

Vertical Pattern
12 electrical downtilt

Bottom
8 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

806960
45

806960
+45

7-16

7-16

10

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

806 960
X
65
0 14

set by hand or by optional RCU (remote control unit)


XPol A-Panel 806960 65 15dBi 014T

739 684

Type No.
Frequency range
Polarization
Gain

806 866 MHz

806 960
824 894 MHz

880 960 MHz

+45, 45

+45, 45

+45, 45

14.5 dBi

14.7 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 70
Vertical: 15.5

Electrical tilt
continuously adjustable

0 14

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

Horizontal:
Vertical:

15 dBi
68
15

Horizontal: 65
Vertical: 14.5

0 14

0 14

0 ... 4 ... 8 ... 14T


0 ... 4 ... 8 ... 14T
0 ... 4 ... 8 ... 14T
13 ... 13 ... 15 ... 15 dB 16 ... 16 ... 16 ... 16 dB 16 ... 16 ... 16 ... 16 dB
> 25 dB

> 25 dB

> 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


125

65
14.5

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 14 electrical downtilt

824 894 MHz: +45/ 45 Polarization


130

806 960
45

806 960
+45

7-16

7-16

68
15

Input

dB

Mechanical specifications

10

dB

10

Horizontal Pattern

Vertical Pattern
0 14 electrical downtilt

806 866 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

135

2 x 7-16 female

Connector position

70

14 kg
Frontal:
Lateral:
Rearside:

230 N (at 150 km/h)


130 N (at 150 km/h)
500 N (at 150 km/h)

15.5

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

200 km/h

Packing size

1562 x 287 x 165 mm

Height/width/depth

1296 / 262 / 116 mm

Vertical Pattern
0 14 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

11

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
65

XPol A-Panel 806960 65 17dBi

739 623
806 894 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

68
10

Horizontal: 65
Vertical:
9.5

Sidelobe suppression for


first sidelobe above horizon

15 dB

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance

50

VSWR

< 1.5

9.5

Max. power per input

600 W (at 50 C ambient temperature)

10

2 x 7-16 female

3
0

Bottom or top

Vertical Pattern

12 kg

first null-fill below horizon


better or equal 25 dB
below maximum gain

Weight
Wind load (at 150 km/h)

3
0

< 150 dBc

Connector position

10

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

65

120

806960

dB

Frequency range

dB

Type No.

Frontal / Lateral / Rearside:


330 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 65 17dBi 6T

739 634

Type No.
Frequency range

806960
880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

Horizontal:
Vertical:

68
10

Horizontal: 65
Vertical:
9.5

10

Electrical tilt

6, fixed

6, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

18 dB

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation

> 32 dB

> 32 dB

50

50

VSWR

< 1.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

Impedance

Input

65

9.5

10

7-16 female
Bottom
12 kg

dB

Half-power beam width


Copolar +45/ 45

120

dB

806 894 MHz

Vertical Pattern
6 electrical downtilt

Frontal / Lateral / Rearside:


350 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

12

A-Panel
Dual Polarization
Half-power Beam Width

824 960
X
65

XPol A-Panel 824960 65 17dBi 9T

741 622

Frequency range
824 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

68
10

65

120

824960

Horizontal: 65
Vertical:
9.5

10

dB

Type No.

9, fixed

9, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

16 dB

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation

> 32 dB

> 32 dB

Impedance

50

50

VSWR

< 1.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

9.5

10

2 x 7-16 female

dB

Electrical tilt

Vertical Pattern
9 electrical downtilt

Bottom
12 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

824960
45

824960
+45

7-16

7-16

13

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

806 960
X
65
0 10

set by hand or by optional RCU (remote control unit)


XPol A-Panel 806960 65 16.5dBi 010T

739 685

Type No.
Frequency range

806960
824 894 MHz

806 866 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 16 dBi

2 x 16 dBi

2 x 16.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt
continuously adjustable

Horizontal:
Vertical:

0.5 10

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

68
10

0
60

Isolation, between ports

68
10

0.5 10

Horizontal:
Vertical:

65
9.5

0.5 10

0 ... 4 ... 8 ... 10 T 0 ... 4 ... 8 ... 10 T 0 ... 4 ... 8 ... 10 T


16 ... 16 ... 16 ... 16 dB 16 ... 16 ... 16 ... 16 dB 16 ... 16 ... 16 ... 16 dB
> 25 dB

> 25 dB

> 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


125

65
9.5

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0.5 10 electrical downtilt

824 894 MHz: +45/ 45 Polarization


130

806 960
45

806 960
+45

7-16

7-16

68
10

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0.5 10 electrical downtilt

806 866 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

130

2 x 7-16 female

Connector position

68

18 kg
Frontal:
Lateral:
Rearside:

330 N (at 150 km/h)


200 N (at 150 km/h)
770 N (at 150 km/h)

10

Max. wind velocity


dB

dB

10

10

200 km/h

Packing size

2262 x 287 x 165 mm

Height/width/depth

1996 / 262 / 116 mm

0
0

Horizontal Pattern

Vertical Pattern
0.5 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

14

A-Panel
Dual Polarization
Half-power Beam Width

800/900
X
65

XPol A-Panel 870960 65 18dBi


Type No.

739 630

Frequency range

870 960 MHz

Polarization

+45, 45

Gain

2 x 18 dBi

65

120

Horizontal:
Vertical:

65
7

15 dB

Sidelobe suppression for


first sidelobe above horizon

Horizontal Pattern

Front-to-back ratio, copolar

> 30 dB

Isolation

> 32 dB

Impedance

50

VSWR

< 1.3
7

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)


3

2 x 7-16 female

Connector position

Bottom or top

Weight

dB

10

Input

Wind load (at 150 km/h)

dB

10

Half-power beam width


Copolar +45/ 45

Vertical Pattern

19 kg

first null-fill below horizon


better or equal 25 dB
below maximum gain

Frontal / Lateral / Rearside:


470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

800/900
45

800/900
+45

7-16

7-16

XPol A-Panel 806960 65 18dBi

739 624

Frequency range

120

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 18 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 68
Vertical:
7.5

Horizontal:
Vertical:

65
7

65

10

dB

Type No.

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation

> 30 dB

> 32 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

10

2 x 7-16 female
Bottom or top
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Horizontal Pattern

Vertical Pattern

15

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
65

XPol A-Panel 806960 65 18dBi 6T

739 636

Type No.
Frequency range

806960
880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 18 dBi

Horizontal: 68
Vertical:
7.5

Horizontal:
Vertical:

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

18 dB

Front-to-back ratio, copolar

> 30 dB

Isolation

> 32 dB

dB

< 1.3
< 150 dBc

500 W (at 50 C ambient temperature)

Input

Vertical Pattern
6 electrical downtilt

2 x 7-16 female

Connector position

Bottom

Weight
Wind load (at 150 km/h)

Horizontal Pattern

10

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

50

Impedance
VSWR

65
7

10

dB

806 880 MHz

Half-power beam width


Copolar +45/ 45

65

120

19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 65 18dBi 9T

739 637

Frequency range

120

806960
806 870 MHz

870 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 18 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
7.5

65

10

dB

Type No.

Electrical tilt

9, fixed

Horizontal Pattern

Sidelobe suppression for


first sidelobe above horizon

better 18 dB below maximum gain

Front-to-back ratio, copolar

> 30 dB

Isolation

> 32 dB
50

VSWR

< 1.5

7.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

10

2 x 7-16 female

dB

Impedance

Vertical Pattern
9 electrical downtilt

Bottom
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

16

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

806 960
X
65
0 7

set by hand or by optional RCU (Remote Control Unit)


XPol A-Panel 806960 65 17.5dBi 07T

739 686

Type No.
Frequency range

806960
824 894 MHz

806 866 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 17 dBi

2 x 17.2 dBi

2 x 17.5 dBi

Half-power beam width


Copolar +45/ -45

Horizontal: 70
Vertical:
7.9

Horizontal: 68
Vertical:
7.7

Electrical tilt
continuously adjustable

0 7

0 7

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

0
60

Isolation

Horizontal:
Vertical:

65
7.5

0 7

0 ... 2 ... 4 ... 7 T


0 ... 2 ... 4 ... 7 T
0 ... 2 ... 4 ... 7 T
17 ... 17 ... 17 ... 17 dB 18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB
> 25 dB

> 25 dB

> 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


125

65
7.5

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 7 electrical downtilt

824 894 MHz: +45/ 45 Polarization


130

806 960
45

806 960
+45

7-16

7-16

68
7.7

Input

dB

dB

Mechanical specifications

10

10

Connector position

Horizontal Pattern

Vertical Pattern
0 7 electrical downtilt

806 866 MHz: +45/ 45 Polarization

Adjustment
mechanism
Weight
Wind load

135

70

2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
22 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)

7.9

Max. wind velocity


dB

dB

10

10

200 km/h

Packing size

2846 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

0
0

Horizontal Pattern

Vertical Pattern
0 7 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

17

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
90

XPol A-Panel 806960 90 13.5dBi

739 648

90
170

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 13 dBi

2 x 13.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

90
16

Horizontal:
Vertical:

Sidelobe suppression for


first sidelobe above horizon

16 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

Impedance

50

VSWR

< 1.5

90
15

15

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

3
0

Vertical Pattern

Bottom or top

Weight
Wind load (at 150 km/h)

10

2 x 7-16 female

Connector position

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

dB

Frequency range

dB

Type No.

10 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 90 13.5dBi 6T

739 658

Frequency range

90
170

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 13 dBi

2 x 13.5 dBi

Horizontal:
Vertical:

90
16

Horizontal:
Vertical:

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

15 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 30 dB

< 1.5

15

< 1.3
< 150 dBc

Max. power per input

500 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

50

Impedance
VSWR

90
15

10

2 x 7-16 female

dB

Half-power beam width


Copolar +45/ 45

dB

Type No.

Vertical Pattern
6 electrical downtilt

Bottom
8 kg
Frontal / Lateral / Rearside:
230 N / 130 N / 500 N

Max. wind velocity

200 km/h

Height/width/depth

1296 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

18

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

824 960
X
88
0 14

set by hand or by optional RCU (remote control unit)

XPol A-Panel 824960 88 13.5dBi 014T

739 664

Type No.
Frequency range

824960

Polarization
Gain

824 894 MHz

880 960 MHz

+45, 45

+45, 45

13.5 dBi

13.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 85
Vertical:
15.5

Electrical tilt
continuously adjustable

014

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

0
60

Isolation

Horizontal:
Vertical:

88
15

014

0 ... 4 ... 8 ... 14 T 0 ... 4 ... 8 ... 14 T


16 ... 16 ... 16 ... 16 dB 15 ... 16 ... 16 ... 16 dB
> 23 dB

> 23 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB
50

Impedance
VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


88
170

15

824 960
45

824 960
+45

7-16

7-16

10

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 14 electrical downtilt
continuously adjustable

Mechanical specifications
Input

2 x 7-16 female

Connector position

824 894 MHz: +45/ 45 Polarization

Adjustment
mechanism

85
170

Bottom
1x, Position bottom
continuously adjustable

Weight
15.5

Wind load

14 kg
Frontal:
Lateral:
Rearside:

230 N (at 150 km/h)


130 N (at 150 km/h)
500 N (at 150 km/h)

10

Max. wind velocity

Horizontal Pattern

dB

dB

10

200 km/h

Packing size

1562 x 287 x 165 mm

Height/width/depth

1296 / 262 / 116 mm

Vertical Pattern
0 14 electrical downtilt
continuously adjustable

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

19

A-Panel
Dual Polarization
Half-power Beam Width

870 960
X
90

XPol A-Panel 870960 90 15.5dBi

739 655

Frequency range

870 960 MHz

Polarization

+45, 45

Gain

2 x 15.5 dBi

Half-power beam width


Copolar +45/ 45
Sidelobe suppression for
first sidelobe above horizon

Horizontal:
Vertical:

90
10

15 dB

90
170

dB

Type No.

Horizontal Pattern

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

Impedance

50

VSWR

< 1.3
10

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

2 x 7-16 female
Bottom or top
14 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

10

Vertical Pattern
first null-fill below horizon
better or equal 25 dB
below maximum gain

870960
45

870960
+45

7-16

7-16

20

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
90

XPol A-Panel 806960 90 15.5dBi

739 649

90
170

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 15.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

90
10

Horizontal: 90
Vertical:
9.5

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

Impedance

50

VSWR

< 1.5

9.5

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

3
0

Bottom or top

Vertical Pattern

12 kg

first null-fill below horizon


better or equal 25 dB
below maximum gain

Weight
Wind load (at 150 km/h)

10

2 x 7-16 female

Connector position

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

dB

Frequency range

dB

Type No.

Frontal / Lateral / Rearside:


330 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 90 15.5dBi 6T

739 660

Frequency range

90
170

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 15.5 dBi

Horizontal:
Vertical:

90
10

Horizontal: 90
Vertical:
9.5

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

16 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

< 1.5

9.5

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

50

Impedance
VSWR

10

2 x 7-16 female

dB

Half-power beam width


Copolar +45/ 45

dB

Type No.

Vertical Pattern
6 electrical downtilt

Bottom
14 kg
Frontal / Lateral / Rearside:
330 N / 200 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1936 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

21

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

806 960
X
88
0 10

set by hand or by optional RCU (remote control unit)


XPol A-Panel 806960 88 15dBi 010T

739 665

Type No.
Frequency range
806 866 MHz

806960
824 894 MHz

880 960 MHz


+45, 45

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 15 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 85
Vertical: 10.5

Horizontal: 85
Vertical: 10.2

Electrical tilt
continuously adjustable

0.5 10

0.5 10

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

0
60

Isolation

2 x 15 dBi
Horizontal:
Vertical:

88
10

0.5 10

0 ... 4 ... 8 ... 10 T 0 ... 4 ... 8 ... 10 T 0 ... 4 ... 8 ... 10 T


16 ... 16 ... 17 ... 17 dB 16 ... 16 ... 17 ... 17 dB 16 ... 16 ... 18 ... 18 dB
> 25 dB

> 25 dB

> 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


88
160

10

10

dB

dB

10

Horizontal Pattern

Vertical Pattern
0.5 10 electrical downtilt

824 894 MHz: +45/ 45 Polarization

806 960
45

806 960
+45

7-16

7-16

85
160
10.2

Mechanical specifications

10

Input

dB

dB

10

Horizontal Pattern

2 x 7-16 female

Connector position

Vertical Pattern
0.5 10 electrical downtilt

806 866 MHz: +45/ 45 Polarization

Adjustment
mechanism

1x, Position bottom


continuously adjustable

Weight
Wind load

85

Bottom

160

18 kg
Frontal:
Lateral:
Rearside:

330 N (at 150 km/h)


200 N (at 150 km/h)
770 N (at 150 km/h)

10.5

Max. wind velocity


10

Horizontal Pattern

dB

dB

10

200 km/h

Packing size

2262 x 287 x 165 mm

Height/width/depth

1996 / 262 / 116 mm

Vertical Pattern
0.5 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

22

A-Panel
Dual Polarization
Half-power Beam Width

806 960
X
90

XPol A-Panel 806960 90 17dBi

739 650

90
170

806960
806 884 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 90
Vertical:
7.5

Horizontal:
Vertical:

Sidelobe suppression for


first sidelobe above horizon

15 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

Impedance

50

VSWR

< 1.5

90
7

< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

3
0

Bottom or top

Vertical Pattern

19 kg

first null-fill below horizon


better or equal 25 dB
below maximum gain

Weight
Wind load (at 150 km/h)

10

2 x 7-16 female

Connector position

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

dB

Frequency range

dB

Type No.

Frontal / Lateral / Rearside:


470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

806960
45

806960
+45

7-16

7-16

XPol A-Panel 806960 90 17dBi 6T

739 662

Frequency range

90
170

806960
806 880 MHz

880 960 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

Horizontal: 90
Vertical:
7.5

Horizontal:
Vertical:

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

16 dB

Front-to-back ratio, copolar

> 25 dB

Isolation

> 32 dB

< 1.5

< 1.3
< 150 dBc

Max. power per input

600 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

50

Impedance
VSWR

90
7

10

2 x 7-16 female

dB

Half-power beam width


Copolar +45/ 45

dB

Type No.

Vertical Pattern
6 electrical downtilt

Bottom
19 kg
Frontal / Lateral / Rearside:
470 N / 280 N / 1040 N

Max. wind velocity

200 km/h

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

23

A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

806 960
X
88
0 7

set by hand or by optional RCU (remote control unit)


XPol A-Panel 806960 88 16dBi 07T

739 666

Type No.
Frequency range
Polarization
Gain

806 866 MHz

806960
824 894 MHz

880 960 MHz

+45, 45

+45, 45

+45, 45

2 x 16 dBi

2 x 16.1 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 85
Vertical:
8.2

Electrical tilt
continuously adjustable

0 7

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

Isolation

Horizontal:
Vertical:

2 x 16.2 dBi

85
8

Horizontal:
Vertical:

0 7

88
7.5

0 7

0 ... 2 ... 4 ... 7 T


0 ... 2 ... 4 ... 7 T
0 ... 2 ... 4 ... 7 T
17 ... 17 ... 17 ... 17 dB 17 ... 17 ... 17 ... 17 dB 17 ... 17 ... 17 ... 17 dB
Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Typically: 25 dB
> 15 dB

Typically: 25 dB
> 15 dB

Typically: 25 dB
> 15 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

400 W (at 50 C ambient temperature)

880 960 MHz: +45/ 45 Polarization


88
160

7.5

10

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 7 electrical downtilt

824 894 MHz: +45/ 45 Polarization

806 960
45

806 960
+45

7-16

7-16

85
160

Mechanical specifications

10

Input

dB

dB

10

Connector position

Horizontal Pattern

Vertical Pattern
0 7 electrical downtilt

806 866 MHz: +45/ 45 Polarization

Adjustment
mechanism
Weight
Wind load

85
160

2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
22 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)

8.2

Max. wind velocity


10

Horizontal Pattern

dB

dB

10

200 km/h

Packing size

2846 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

Vertical Pattern
0 7 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

24

Summary Directional Antennas


Dual Polarization + 45/ 45
1800/1900/2000
Dual Polarization + 45/ 45 1800/1900/2000
Type

Type No.

Height
[mm]

Connector
position

Page

XPol F-Panel

17101880

33

19.5dBi

2T

739 927

982

bottom

26

XPol F-Panel

17102170

33

21dBi

08T

742 351

1302

bottom

49

XPol F-Panel

17101880

33

22dBi

2T

741 623

1942

bottom

26

XPol F-Panel

17102170

45

20dBi

08T

742 218

1302

bottom

50

XPol F-Panel

17102170

65

12dBi

2T

739 489

342

bottom

51

XPol
XPol
XPol
XPol

F-Panel
F-Panel
F-Panel
F-Panel

17101880
17101880
17101880
17102170

65
65
65
65

15.5dBi
15.5dBi
15dBi
15.5dBi

6T
12T
010T

739 490
739 491
741 264
742 211

662
662
662
662

bottom or top
bottom
bottom
bottom

27
27
28
52

XPol
XPol
XPol
XPol
XPol
XPol

F-Panel
F-Panel
F-Panel
F-Panel
F-Panel
F-Panel

17101880
17101990
17102170
17102170
17102170
17101990

65
65
65
65
65
65

18dBi
18dBi
18.5dBi
18dBi
18dBi
18dBi

2T
2T
08T
010T
6T

739
739
741
742
742
739

494
495
794
212
215
496

1302
1302
1302
1302
1302
1302

bottom or top
bottom
bottom
bottom
bottom
bottom

28
29
53
54
55
29

XPol F-Panel
XPol F-Panel

17101990
17102170

65
65

19.5dBi
19.5dBi

2T
06T

739 498
742 213

1942
1942

bottom
bottom

30
56

XPol F-Panel

17101990

90

8dBi

739 695

174

bottom or top

31

XPol F-Panel

17102170

88

11.5dBi

0T

741 984

342

bottom

57

XPol F-Panel

17102170

88

14dBi

010T

741 988

662

bottom

58

XPol
XPol
XPol
XPol

F-Panel
F-Panel
F-Panel
F-Panel

17101880
17102170
17101880
17102170

90
85
90
88

16.5dBi
17dBi
16.5dBi
17dBi

2T
2T
6T
08T

707
987
708
989

1302
1302
1302
1302

bottom
bottom
bottom
bottom

32
59
32
60

XPol F-Panel

17101880

90

17.5dBi

2T

739 710

1902

bottom

33

XPol F-Panel

17102170

88

18dBi

06T

741 990

1942

bottom

61

739
741
739
741

Versions with connector position Top on request

2-Multi-band Dual Polarization + 45/ 45 1800/1900/2000


Adjustable Electrical Downtilt Possible upgrade with Remote Control Unit (RCU)
XXPol F-Panel 17102170/17102170 65/65
15/15dBi 010/010T
XXPol F-Panel 17102170/17102170 65/65
18/18dBi 08/08T
XXPol F-Panel 17102170/17102170 65/65 19.5/19.5dBi 06/06T

742 233
742 234
742 235

679
1302
1942

bottom
bottom
bottom

62
63
64

Broadband also suitable


for UMTS

25

F-Panels
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

17101880
X
33
2

XPol F-Panel 17101880 33 19.5dBi 2T

739 927

Type No.
Frequency range

1710 1880 MHz

Polarization

+45, 45

Gain

2 x 19.5 dBi

33

+45
Horizontal:
Vertical:

45
Horizontal:
Vertical:

33
9

33
9

dB

10

Half-power beam width


Copolar

Electrical tilt

Horizontal Pattern

above horizon for first sidelobe


better or equal 14 dB below maximum gain

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance

50

VSWR

< 1.5

10

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input

2 x 7-16 female

Vertical Pattern

Bottom

2 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain

Connector position
Weight
Wind load (at 150 km/h)

dB

Sidelobe suppression

2, fixed

7 kg
Frontal / Lateral / Rearside:
260 N / 95 N / 370 N

Max. wind velocity

200 km/h

Height/width/depth

982 / 262 / 59 mm

17101880
45

17101880
+45

7-16

7-16

XPol F-Panel 17101880 33 22dBi 2T

741 623

Type No.
Frequency range

1710 1880 MHz

Polarization

33

+45, 45

Gain

2 x 22 dBi
+45
Horizontal:
Vertical:

45
Horizontal:
Vertical:

33
5

33
5

dB

10

Half-power beam width


Copolar

Sidelobe suppression

2, fixed
above horizon for first sidelobe
better or equal 14 dB below maximum gain

Front-to-back ratio, copolar

> 30 dB

Isolation

> 30 dB

Impedance
VSWR

50
< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

5
10

2 x 7-16 female

dB

Electrical tilt

Vertical Pattern
2 electrical downtilt

Bottom
11 kg
Frontal / Lateral / Rearside:
540 N / 210 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1942 / 262 / 59 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

26

F-Panel
Dual Polarization
Half-power Beam Width

17101880
X
65

XPol F-Panel 17101880 65 15.5dBi


Type No.
Frequency range

739 490

Polarization

+45, 45

Gain

2 x 15.5 dBi

65

120

1710 1880 MHz

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.5

65
13

dB

10

Half-power beam width


Copolar +45/ 45

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

13

Connector position

2 x 7-16 female

10

Bottom or top
3

Weight

dB

Input

3.5 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


150 N / 55 N / 120 N

Max. wind velocity

200 km/h

Height/width/depth

662 / 155 / 49 mm

Vertical Pattern

17101880
45

17101880
+45

7-16

7-16

XPol F-Panel 17101880 65 15.5dBi 6T


Type No.
Frequency range
Polarization
Gain

739 491
120

1710 1880 MHz

65

+45, 45
2 x 15.5 dBi
65
14

6, fixed

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input

3
0

Horizontal Pattern

14

10

2 x 7-16 female
3

Connector position

Bottom

Weight

3.5 kg

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


150 N / 55 N / 120 N

Max. wind velocity

200 km/h

Height/width/depth

662 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

dB

Electrical tilt

Horizontal:
Vertical:

dB

10

Half-power beam width


Copolar +45/ 45

Vertical Pattern
6 electrical downtilt

27

F-Panel
Dual Polarization
Half-power Beam Width

17101880
X
65

XPol F-Panel 17101880 65 15dBi 12T

741 264

Type No.
Frequency range
Polarization

+45, 45

Gain

2 x 15 dBi

65

120

1710 1880 MHz

Horizontal:
Vertical:

Electrical tilt

65
14

12, fixed

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

3
0

Horizontal Pattern

50

Impedance

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input

14

10

2 x 7-16 female
3

Connector position

Bottom

Weight

3.5 kg

dB

VSWR

Wind load (at 150 km/h)

dB

10

Half-power beam width


Copolar +45/ 45

Frontal / Lateral / Rearside:


150 N / 55 N / 120 N

Max. wind velocity

200 km/h

Height/width/depth

662 / 155 / 49 mm

Vertical Pattern
12 electrical downtilt

17101880
45

17101880
+45

7-16

7-16

XPol F-Panel 17101880 65 18dBi


Type No.
Frequency range
Polarization
Gain

739 494
120

1710 1880 MHz

65

+45, 45
2 x 18 dBi

Front-to-back ratio, copolar


Isolation, between ports
Impedance
VSWR

Horizontal:
Vertical:

65
6.5

> 30 dB
> 30 dB

dB

10

Half-power beam width


Copolar +45/ 45

Horizontal Pattern

50
< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

6.5

Connector position

2 x 7-16 female

10

Bottom or top
3

Weight

dB

Input

6 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


310 N / 110 N / 250 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

Vertical Pattern

28

F-Panel
Dual Polarization
Half-power Beam Width

17101990
X
65

XPol F-Panel 17101990 65 18dBi 2T


Type No.
Frequency range

739 495

Polarization

+45, 45

Gain

2 x 18 dBi

65

120

1710 1990 MHz

Horizontal:
Vertical:

Electrical tilt

2, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

Horizontal Pattern

Max. power per input

200 W (at 50 C ambient temperature)

10

dB

< 150 dBc


0

2 x 7-16 female

Vertical Pattern

Bottom

2 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain

Connector position
Weight
Wind load (at 150 km/h)

< 1.4 (1710 1880 MHz)


< 1.5 (1880 1990 MHz)

Intermodulation IM3
(2 x 43 dBm carrier)

Input

50

Impedance
VSWR

65
7

dB

10

Half-power beam width


Copolar +45/ 45

6 kg
Frontal / Lateral / Rearside:
310 N / 110 N / 250 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 49 mm

17101990
45

17101990
+45

7-16

7-16

XPol F-Panel 17101990 65 18dBi 6T


Type No.
Frequency range
Polarization
Gain

739 496
120

1710 1990 MHz

65

+45, 45
2 x 18 dBi
Horizontal:
Vertical:

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

VSWR

50

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

< 1.4 (1710 1880 MHz)


< 1.5 (1880 1990 MHz)

Intermodulation IM3
(2 x 43 dBm carrier)

Input

10

dB

Impedance

65
7

dB

10

Half-power beam width


Copolar +45/ 45

2 x 7-16 female

Vertical Pattern

Bottom

6 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain

6 kg
Frontal / Lateral / Rearside:
310 N / 110 N / 250 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

29

F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

17101990
X
65
2

XPol F-Panel 17101990 65 19.5dBi 2T

Frequency range
Polarization
Gain
Half-power beam width
Copolar +45/ 45

739 498
65

120

1710 1990 MHz


+45, 45
2 x 19.5 dBi (1880 1990 MHz)
2 x 19 dBi (1710 1880 MHz)
Horizontal:
Vertical:

65
5

10

dB

Type No.

2, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 30 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input

5
10

2 x 7-16 female

Connector position

Bottom

Weight

8.5 kg

Wind load (at 150 km/h)

Horizontal Pattern

Frontal / Lateral / Rearside:


480 N / 180 N / 380 N

Max. wind velocity

200 km/h

Height/width/depth

1942 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

dB

Electrical tilt

Vertical Pattern
2 electrical downtilt

17101990
45

17101990
+45

7-16

7-16

30

F-Panel
Dual Polarization
Half-power Beam Width

1710 1990
X
90

XPol F-Panel 17101990 90 8dBi

Polarization
Gain
Half-power beam width
Copolar +45/ 45

1710 1990 MHz


+45, 45
2 x 8 dBi
Horizontal:
Vertical:

Front-to-back ratio, copolar

> 20 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.4

90
55

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input
Connector position

90
170

2 x 7-16 female

3
0

Horizontal Pattern

55

10

Bottom or top
3

Weight

dB

Frequency range

739 695

dB

Type No.

3 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


20 N / 15 N / 30 N

Max. wind velocity

200 km/h

Height/width/depth

174 / 155 / 69 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

Vertical Pattern

17101990
45

17101990
+45

7-16

7-16

31

F-Panel
Dual Polarization
Half-power Beam Width

17101880
X
90

XPol F-Panel 17101880 90 16.5dBi 2T

Polarization

+45, 45

Gain

2 x 16.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt

2, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 27 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.4

90
7

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

Intermodulation IM3
(2 x 43 dBm carrier)

Input

90
170

1710 1880 MHz

dB

Frequency range

739 707

10

3
0

2 x 7-16 female
Bottom
6 kg
Frontal / Lateral / Rearside:
130 N / 110 N / 310 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 69 mm

dB

Type No.

Vertical Pattern
2 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain
17101880
45

17101880
+45

7-16

7-16

XPol F-Panel 17101880 90 16.5dBi 6T

Frequency range
Polarization
Gain
Half-power beam width
Copolar +45/ 45

739 708

90
170

1710 1880 MHz


+45, 45
2 x 16.5 dBi
Horizontal:
Vertical:

Electrical tilt

6, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 27 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.4

90
7

dB

Type No.

Horizontal Pattern

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

10

3
0

2 x 7-16 female
Bottom
6 kg
Frontal / Lateral / Rearside:
130 N / 110 N / 310 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 69 mm

dB

Intermodulation IM3
(2 x 43 dBm carrier)

Vertical Pattern
6 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain

Mounting accessories are not included in the scope of delivery (see page 147 155)

32

F-Panels
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

17101880
X
90
2

XPol F-Panel 17101880 90 17.5dBi 2T

Polarization

+45, 45

Gain

2 x 17.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt

2, fixed

Sidelobe suppression for


first sidelobe above horizon

14 dB

Front-to-back ratio, copolar

> 25 dB

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.4

90
5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

200 W (at 50 C ambient temperature)

Input
Connector position
Weight
Wind load (at 150 km/h)

90
170

1710 1880 MHz

3
0

Horizontal Pattern

5
10

3
0

2 x 7-16 female
Bottom
9 kg
Frontal / Lateral / Rearside:
190 N / 160 N / 470 N

Max. wind velocity

200 km/h

Height/width/depth

1902 / 155 / 69 mm

dB

Frequency range

739 710

dB

Type No.

Vertical Pattern
2 electrical downtilt
first null-fill below horizon
better or equal 25 dB
below maximum gain

Mounting accessories are not included in the scope of delivery (see page 147 155)

17101880
45

17101880
+45

7-16

7-16

33

34

Summary Directional Antennas


Dual-band
800/900 1800/2000
Dual-band 800/900 1800/2000 Dual Polarization + 45/ 45
Type

Type No.

Height
[mm]

Page

741 316
742 226

656
770

36
65

320
326
151
264

1296
1296
1296
1296

37
38
39
66

XXPol A-Panel
XXPol A-Panel

870960/17101880
824960/17102170

65/65
65/65

12.5/13dBi
12/15dBi

XXPol A-Panel
XXPol A-Panel
XXPol A-Panel
XXPol A-Panel

870960/17101880
870960/17101880
824960/17101880
824960/17102170

65/60
65/60
65/63
65/ 65

15/16.5dBi
15/17dBi
14.5/16.5dBi
14/17dBi

XXPol A-Panel
XXPol A-Panel

870960/17101880
870960/17101880

65/60
65/60

17/18dBi
17/18.5dBi

741 322
741 327

1936
1936

40
41

XXPol A-Panel
XXPol A-Panel
XXPol A-Panel

870960/17101880
870960/17101880
824960/17102170

65/60
65/60
65/ 65

18/19dBi
18/19.5dBi
16/18.5dBi

010/06T

741 324
741 328
742 265

2580
2580
1936

42
43
67

XXPol A-Panel
XXPol A-Panel
XXPol A-Panel
XXPol A-Panel

870960/17101880
870960/17101880
870960/17101880
824960/17102170

65/60
65/60
65/ 60
65/65

17.5/17.5dBi
17.5/18dBi
17/18dBi
17/18.5dBi

6T
6T
28T/2T
07T/06T

741
741
742
742

336
344
047
266

2580
2580
2580
2580

44
45
46
68

738 445
738 446

310
310

70
70

010T/2T
014/08T

741
741
742
742

Connector position: Bottom

Dual-band 800/900 1800/2000 Vertical Polarization


VPol BiDir
VPol BiDir

824960/17102170
824960/17102170

Connector position: Bottom or top

65
65

5dBi
5dBi

Broadband also suitable


for UMTS

35

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner

870 960

1710 1880

65

65
C

XXPol A-Panel 870960/17101880 C 65/ 65 12.5/13dBi

741 316

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 12.5 dBi

2 x 13 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
28

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

60
19

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

250 W
150 Watt
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

28

dB

870 960
+45

1710 1880
+45

7-16

7-16

dB

10

10

870 960
45

1710 1880
45

65

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*

2 x 7-16 female
Bottom or top

Weight
120

65

Wind load
19

Max. wind velocity

Frontal:
Lateral:
Rearside:

110 N (at 150 km/h)


60 N (at 150 km/h)
240 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

7 kg

Vertical Pattern

Packing size

782 x 287 x 165 mm

Height/width/depth

656 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

36

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner

870 960

1710 1880

65

60
C

XXPol A-Panel 870960/17101880 C 65/ 60 15/16.5dBi

741 320

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 16.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
14

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

60
8

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

dB

1710 1880
+45
C

7-16

7-16

dB

10

870 960
+45

14

10

870 960
45

1710 1880
45

65

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*

2 x 7-16 female
Bottom or top

Weight
115

60

Wind load
8

Max. wind velocity

Frontal:
Lateral:
Rearside:

220 N (at 150 km/h)


140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

13 kg

Vertical Pattern

Packing size

1422 x 287 x 165 mm

Height/width/depth

1296 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

37

Dual-band A-Panel
Dual Polarization
Half-power Beam Width

870 960

1710 1880

65

60

XXPol A-Panel 870960/17101880 65/ 60 15/17dBi

741 326

Type No.
Frequency range

900
870
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 15 dBi

2 x 17 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Front-to-back ratio, copolar


Isolation, between ports

65
14

Horizontal:
Vertical:

> 30 dB

60
8

> 30 dB

> 30 dB (GSM 900 GSM 900)1


> 30 dB (GSM 1800 GSM 1800)
> 30 dB (GSM 900 GSM 1800)

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

400 W
200 W
(at 50 C ambient temperature)

870 960 +45/ 45 Polarization

120

65

1710 1880
45

870 960
45

870 960
+45

1710 1880
+45

7-16

7-16

7-16

7-16

14

dB

dB

10

10

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*

4 x 7-16 female
Bottom or top

Weight
115

60

Wind load
8

Max. wind velocity

Frontal:
Lateral:
Rearside:

220 N (at 150 km/h)


140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

13 kg

Vertical Pattern

Packing size

1422 x 287 x 165 mm

Height/width/depth

1296 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

38

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner

824 960

1710 1880

65

63

010

2
C

XXPol A-Panel 824960/17101880 C 65/63 14.5/16.5dBi 010T/2T

742 151

Type No.
Frequency range

824960
824 880 MHz 880 960 MHz

17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 14 dBi

2 x 14.5 dBi

2 x 16.5 dBi

Horizontal: 69
Vertical: 14.5

Horizontal: 65
Vertical:
14

Horizontal: 63
Vertical:
8.5

010

010

Half-power beam width


Copolar +45/ 45
Electrical tilt
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

0 ... 6 ... 10T 0 ... 6 ... 10T


16 ... 13 ... 12 dB 17 ... 15 ... 13 dB

16 dB

> 30 dB

> 30 dB

> 27 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

> 30 dB

> 30 dB

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

824 960 +45/ 45 Polarization

130

1710 1880
45

65

1710 1880
+45
C

7-16

7-16

dB

dB

10

10

Horizontal Pattern

Vertical Pattern
010 electrical downtilt
continuously adjustable

120

Mechanical specifications
Input

Adjustment
mechanism

8.5

Max. wind velocity

10

dB

dB

10

Horizontal Pattern

Bottom
1x, Position bottom
continuously adjustable

Weight

63

Wind load

2 x 7-16 female

Connector position

1710 1880 +45/ 45 Polarization

824 960
+45

14

824 960
45

14 kg
Frontal:
Lateral:
Rearside:

230 N (at 150 km/h)


130 N (at 150 km/h)
500 N (at 150 km/h)
200 km/h

Packing size

1422 x 287 x 165 mm

Height/width/depth

1296 / 262 / 116 mm

Vertical Pattern
2 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 139 146)

39

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner

870 960

1710 1880

65

60
C

XXPol A-Panel 870960/17101880 C 65/ 60 17/18dBi

741 322

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17 dBi

2 x 18 dBi

Horizontal: 65
Vertical:
9.5

Horizontal: 60
Vertical:
5.5

> 15 dB

> 15 dB

Half-power beam width


Copolar +45/ 45
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

65
9.5

870 960
45

1710 1880
45

870 960
+45

1710 1880
+45

10

7-16

7-16

dB

dB

10

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*

2 x 7-16 female
Bottom or top

Weight
115

60

Wind load
5.5

Max. wind velocity

Frontal:
Lateral:
Rearside:

330 N (at 150 km/h)


200 N (at 150 km/h)
770 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

19 kg

Vertical Pattern

Packing size

2057 x 287 x 165 mm

Height/width/depth

1936 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

40

Dual-band A-Panel
Dual Polarization
Half-power Beam Width

870 960

1710 1880

65

60

XXPol A-Panel 870960/17101880 65/ 60 17/18.5dBi

741 327

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17 dBi

2 x 18.5 dBi

Horizontal: 65
Vertical:
9.5

Horizontal: 60
Vertical:
5.5

Half-power beam width


Copolar +45/ 45
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio, copolar
Isolation, between ports

> 15 dB
> 30 dB

> 30 dB

> 30 dB (GSM 900 GSM 900)1


> 30 dB (GSM 1800 GSM 1800)
> 30 dB (GSM 900 GSM 1800)

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

400 W
200 W
(at 50 C ambient temperature)

870 960 +45/ 45 Polarization

120

65
9.5

1710 1880
45

870 960
45

870 960
+45

1710 1880
+45

7-16

7-16

7-16

7-16

10

dB

dB

10

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*

4 x 7-16 female
Bottom or top

Weight
115

60

Wind load
5.5

Max. wind velocity

Frontal:
Lateral:
Rearside:

330 N (at 150 km/h)


200 N (at 150 km/h)
770 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

19 kg

Vertical Pattern

Packing size

2057 x 287 x 165 mm

Height/width/depth

1936 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

41

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Integrated Combiner

870 960

1710 1880

65

60
C

XXPol A-Panel 870960/17101880 C 65/ 60 18/19dBi

741 324

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 18 dBi

2 x 19 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
7

Horizontal:
Vertical:

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

60
4

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

65
7

870 960
45

1710 1880
45

10

870 960
+45

1710 1880
+45

3
0

Horizontal Pattern

7-16

7-16

dB

dB

10

Vertical Pattern

Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*
Weight
115

60

Wind load
4

Max. wind velocity

Bottom or top
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

2 x 7-16 female

Vertical Pattern

Packing size

2692 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

42

Dual-band A-Panel
Dual Polarization
Half-power Beam Width

870 960

1710 1880

65

60

XXPol A-Panel 870960/17101880 65/ 60 18/19.5dBi

741 328

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 18 dBi

2 x 19.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Front-to-back ratio, copolar


Isolation, between ports

65
7

Horizontal:
Vertical:

> 30 dB

60
4

> 30 dB

> 30 dB (GSM 900 GSM 900)1


> 30 dB (GSM 1800 GSM 1800)
> 30 dB (GSM 900 GSM 1800)

Impedance

50

50

VSWR

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

400 W
200 W
(at 50 C ambient temperature)

870 960 +45/ 45 Polarization

120

65
7

10

1710 1880
45

870 960
45

870 960
+45

1710 1880
+45

7-16

7-16

7-16

7-16

dB

dB

10

Horizontal Pattern

Vertical Pattern
Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

Connector position*
Weight
115

60

Wind load
4

Max. wind velocity

Bottom or top
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h

dB

Horizontal Pattern

dB

10

10

4 x 7-16 female

Vertical Pattern

Packing size

2692 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

* Inverted mounting:
Connector position top: Change drain hole screw.

Mounting accessories are not included in the scope of delivery (see page 139 146)

43

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt
Integrated Combiner

870 960

1710 1880

65

60

6
C

XXPol A-Panel 870960/17101880 C 65/ 60 17.5/17.5dBi 6T

741 336

Type No.
Frequency range

870900
960
870 960 MHz

1800
17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 17.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
7

Horizontal: 60
Vertical:
6.5

Electrical tilt

6, fixed

6, fixed

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

50

50

Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

65
7

dB

dB

870 960
45

1710 1880
45

10

10

1710 1880
+45

7-16

7-16

Horizontal Pattern

Vertical Pattern
6 electrical downtilt

Mechanical specifications

1710 1880 +45/ 45 Polarization

Input
115

Connector position

60

Weight
6.5

Wind load

dB

Horizontal Pattern

dB

10

10

870 960
+45

Vertical Pattern
6 electrical downtilt

Max. wind velocity

2 x 7-16 female
Bottom
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h

Packing size

2692 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

44

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

870 960

1710 1880

65

60

XXPol A-Panel 870960/17101880 65/ 60 17.5/18dBi 6T

741 344

Type No.
Frequency range

870 960
870 960 MHz

17101880
1710 1880 MHz

Polarization

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 18 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

65
7

Horizontal: 60
Vertical:
6.5

Electrical tilt

6, fixed

6, fixed

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB (GSM 900 GSM 900)1


> 30 dB (GSM 1800 GSM 1800)
> 30 dB (GSM 900 GSM 1800)
50

Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power per input

50

< 1.5

< 1.5

< 150 dBc

< 150 dBc

400 W
200 W
(at 50 C ambient temperature)

870 960 +45/ 45 Polarization

120

65
7

dB

3
0

Horizontal Pattern

1710 1880
45

870 960
45

870 960
+45

1710 1880
+45

7-16

7-16

7-16

7-16

dB

10

10

Vertical Pattern
6 electrical downtilt
Mechanical specifications

1710 1880 +45/ 45 Polarization

Input
115

Connector position

60

Weight
6.5

dB

Horizontal Pattern

dB

10

10

Wind load

Vertical Pattern
6 electrical downtilt

Max. wind velocity

4 x 7-16 female
Bottom
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h

Packing size

2692 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

45

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt
Integrated Combiner

870 960

1710 1880

65

60

2 8

2
C

XXPol A-Panel 870960/17101880 C 65/ 60 17/18dBi 28T/2T

742 047

Type No.
Frequency range

870900
960
870 960 MHz

Polarization
Gain
Half-power beam width
Copolar +45/ 45

+45, 45

+45, 45

2 x 17 dBi (0.5 dB)

2 x 18 dBi (0.5 dB)

Horizontal:
Vertical:

Electrical tilt

1800
17101880
1710 1880 MHz

65
7

Horizontal:
Vertical:

2 8, adjustable

2, fixed

Sidelobe suppression for


first sidelobe above horizon

2 ... 4 ... 6 ... 8 T


20 ... 18 ... 17 ... 15 dB

2 T
17 dB

Front-to-back ratio, copolar

> 30 dB

> 30 dB

Isolation, between ports

> 30 dB

> 30 dB

50

50

Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)

60
6

< 1.5

< 1.5

< 150 dBc

< 150 dBc

Max. power per input

250 W
150 W
(at 50 C ambient temperature)

Integrated combiner

The insertion loss is included in the given


antenna gain values.

870 960 +45/ 45 Polarization

120

65
7

870 960
45

1710 1880
45

10

870 960
+45

1710 1880
+45

3
0

Horizontal Pattern

Vertical Pattern
2 8 electrical downtilt
continuously adjustable

7-16

7-16

Mechanical specifications
Input

1710 1880 +45/ 45 Polarization

120

dB

dB

10

Connector position
Adjustment
mechanism

60

Weight
6

dB

Horizontal Pattern

dB

10

10

Wind load

Vertical Pattern
2 electrical downtilt

Max. wind velocity

2 x 7-16 female
Bottom
1x, Position bottom
continuously adjustable
25 kg
Frontal:
470 N (at 150 km/h)
Lateral:
280 N (at 150 km/h)
Rearside: 1040 N (at 150 km/h)
200 km/h

Packing size

2692 x 287 x 165 mm

Height/width/depth

2580 / 262 / 116 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

46

Summary Directional Antennas


UMTS (IMT 2000)

XPol Multi-band 1710 2170 MHz


Type

Type No.

Height
[mm]

Page

XPol F-Panel

17102170

33

21dBi

08T

742 351

1302

49

XPol F-Panel

17102170

45

20dBi

08T

742 218

1302

50

XPol F-Panel

17102170

65

12dBi

2T

739 489

342

51

XPol F-Panel

17102170

65

15.5dBi

010T

742 211

662

52

XPol F-Panel
XPol F-Panel
XPol F-Panel

17102170
17102170
17102170

65
65
65

18.5dBi
18dBi
18dBi

2T
08T
010T

741 794
742 212
742 215

1302
1302
1302

53
54
55

XPol F-Panel

17102170

65

19.5dBi

06T

742 213

1942

56

XPol F-Panel

17102170

88

11.5dBi

741 984

342

57

XPol F-Panel

17102170

88

14dBi

010T

741 988

662

58

XPol F-Panel
XPol F-Panel

17102170
17102170

88
88

17dBi
17dBi

2T
08T

741 987
741 989

1302
1302

59
60

XPol F-Panel

17102170

88

18dBi

06T

741 990

1942

61

Connector position: Bottom

XXPol Multi-band 1710 2170 / 1710 2170 MHz


XXPol F-Panel 17102170/17102170

65/65

15/15dBi

010/010T

742 233

679

62

XXPol F-Panel 17102170/17102170

65/65

18/18dBi

08/08T

742 234

1304

63

XXPol F-Panel 17102170/17102170

65/65

19.5/19.5dBi

06/06T

742 235

1942

64

742 226

770

65

Connector position: Bottom

XXPol Multi-band 824 960 / 1710 2170 MHz


XXPol A-Panel

824960/17102170

65/65

12/15dBi

XXPol A-Panel

824960/17102170

65/65

14/17dBi

014/08T

742 264

1316

66

XXPol A-Panel

824960/17102170

65/65

16/18.5dBi

010/06T

742 265

1936

67

XXPol A-Panel

824960/17102170

65/65

17/18.5dBi

07/06T

742 266

2580

68

Connector position: Bottom

New Products

47

Summary Directional Antennas


UMTS (IMT 2000)

XXXPol Triple-band 824 960 / 1710 2170 / 1710 2170 MHz


Type

XXPol A-Panel

824960
17102170
17102170

65
65
65

17dBi
17dBi
16.5dBi

07T
08T
08T

Type No.

Height
[mm]

Page

742 241

2580

69

New Product

Connector position: Bottom

VPol Multi-band
VPol BiDir
VPol BiDir

VPol LogPer

824960/17102170
824960/17102170

65
65

5dBi
5dBi

738 445
738 446

310
310

70
70

8062170

65

11dBi

742 192

300

71

Additional components, filter products, UMTS / WCDMA

72

Please see further UMTS-antennas in sections Omni and Indoor

For detailed information in electronic format please contact following e-mail:


antennas.mobilcom@kathrein.de

48

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
33
0 8

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 33 21dBi 08T

742 351

Type No.
Frequency range
1710 1880 MHz

17102170
1850 1990 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 20.2 dBi

2 x 20.5 dBi

2 x 20.7 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 36
Vertical:
7.4

Horizontal: 35
Vertical:
7.0

Horizontal: 33
Vertical:
6.7

Electrical tilt
continuously adjustable

0 8

0 8

0 8

Sidelobe suppression:
Vertical Pattern first sidelobe above horizon
Horizontal Pattern

0 ... 4 ... 8T
18 ... 17 16 dB
> 14 dB

0 ... 4 ... 8T
18 ... 18 ... 17 dB
> 14 dB

0 ... 4 ... 8T
18 ... 17 ... 16 dB
> 14 dB

Front-to-back ratio, copolar

> 30 dB

> 30 dB

> 30 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB
> 30 dB

Cross polar ratio


Maindirection
Sector

0
30

Isolation, between ports

1920 2170 MHz

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization

36

10

dB

10

dB

7.4

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1710 2170
45

1710 2170
+45

7-16

7-16

1850 1990 MHz: +45/ 45 Polarization

35

10

Mechanical specifications

10

Input

dB

dB

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

33

6.7

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

10

2 x 7-16 female

Connector position

12 kg
Frontal:
Lateral:
Rearside:

570 N (at 150 km/h)


110 N (at 150 km/h)
570 N (at 150 km/h)
200 km/h

Packing size

1574 x 320 x 92 mm

Height/width/depth

1302 / 299 / 69 mm

Vertical Pattern
0 8 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

49

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
45
0 8

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 45 19.5dBi 08T

742 218

Type No.
Frequency range
1710 1880 MHz

17102170
1850 1990 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 19 dBi

2 x 19.5 dBi

2 x 19.6 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 47
Vertical:
7.3

Electrical tilt
continuously adjustable

0 8

Sidelobe suppression:
Vertical Pattern first sidelobe above horizon
Horizontal Pattern
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
30

Isolation, between ports

Horizontal:
Vertical:

1920 2170 MHz

45
7

Horizontal: 44
Vertical:
6.7

0 8

0 8

0 ... 2 ... 5 ... 8T


0 ... 2 ... 5 ... 8T
0 ... 2 ... 5 ... 8T
17 ... 17 ... 15 ... 15 dB 18 ... 18 ... 17 ... 17 dB 18 ... 18 ... 15 ... 15 dB
> 18 dB
> 18 dB
> 18 dB
Copolar:
> 27 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 27 dB
Total power: > 25 dB

Typically: 18 dB
> 13 dB

Typically: 18 dB
> 13 dB

Typically: 18 dB
> 13 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


47
7.3

dB

dB

10

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1710 2170
45

1710 2170
+45

7-16

7-16

1850 1990 MHz: +45/ 45 Polarization


45
7

Input

dB

Mechanical specifications

10

dB

10

Horizontal Pattern

2 x 7-16 female

Connector position

Vertical Pattern
0 8 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

44

10.2 kg
Frontal:
Lateral:
Rearside:

165 N (at 150 km/h)


110 N (at 150 km/h)
390 N (at 150 km/h)

6.7

Max. wind velocity


10

Horizontal Pattern

Packing size
dB

dB

10

Height/width/depth

200 km/h
1604 x 221 x 107 mm
1306 / 199 / 69 mm

Vertical Pattern
0 8 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

50

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

1710 2170
X
65
2

XPol F-Panel 17102170 65 12dBi 2T

739 489

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 11.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

2 x 12 dBi

67
32

Horizontal:
Vertical:

2 x 12 dBi

65
30

Horizontal:
Vertical:

63
28

Electrical tilt

3, fixed

2, fixed

0, fixed

Front-to-back ratio, copolar

> 30 dB

> 30 dB

> 27 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Cross polar ratio


Maindirection
Sector

0
60

Isolation, between ports

> 30 dB
50

Impedance
VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

150 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


125

67

32
10

dB

dB

10

0
0

Horizontal Pattern

Vertical Pattern
3 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


120

65

1710 2170
45

1710 2170
+45

7-16

7-16

30

dB

dB

10

10

Mechanical specifications

Horizontal Pattern

Vertical Pattern
2 electrical downtilt

Input

2 x 7-16 female

Connector position

1920 2170 MHz: +45/ 45 Polarization

Weight
Wind load

115

63
28

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

Bottom
2 kg
Frontal:
Lateral:
Rearside:

35 N (at 150 km/h)


25 N (at 150 km/h)
80 N (at 150 km/h)
200 km/h

Packing size

444 x 172 x 92 mm

Height/width/depth

342 / 155 / 69 mm

Vertical Pattern
0 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)

51

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
65
010

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 65 15.5dBi 010T

742 211

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 14.7 dBi

2 x 15 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 69
Vertical: 14.5

Electrical tilt
continuously adjustable

0 10

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

Horizontal:
Vertical:

2 x 15.2 dBi

67
14

Horizontal:
Vertical:

0 10

64
13

0 10

0 ... 4 ... 8 ... 10T


0 ... 4 ... 8 ... 10T
18 ... 16 ... 15 .... 15 dB 18 ... 18 ... 18 ... 18 dB

0 ... 4 ... 8 ... 10T


18 ... 18 ... 18 ... 16 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.4

< 1.4

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


130

69
14.5

10

dB

dB

10

0
0

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


128

1710 2170
45

1710 2170
+45

7-16

7-16

67
14

dB

dB

Mechanical specifications

10

10

Input

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

120

2 x 7-16 female

Connector position

64

4.5 kg
Frontal:
Lateral:
Rearside:

65 N (at 150 km/h)


50 N (at 150 km/h)
160 N (at 150 km/h)

13

Max. wind velocity


dB

dB

10

10

200 km/h

Packing size

924 x 172 x 92 mm

Height/width/depth

662 / 155 / 69 mm

0
0

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

52

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

1710 2170
X
65
2

XPol F-Panel 17102170 65 18.5dBi 2T

741 794

Type No.
Frequency range
1710 1880 MHz

17102170
1850 1990 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 17.5 dBi

2 x 18 dBi

2 x 18.5 dBi

Horizontal: 65
Vertical:
6.7

Horizontal: 63
Vertical:
6.5

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

67
7

1920 2170 MHz

Electrical tilt

2, fixed

2, fixed

2, fixed

Sidelobe suppression for


first sidelobe above horizon

> 14 dB

> 14 dB

> 14 dB

Front-to-back ratio, copolar

> 30 dB

> 30 dB

> 30 dB

Typically: 30 dB
> 10 dB

Typically: 30 dB
> 10 dB

Typically: 30 dB
> 10 dB

Cross polar ratio


Maindirection
Sector

0
60

Isolation, between ports

> 30 dB
50

Impedance
VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


125

67
7

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
2 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


120

1710 2170
45

1710 2170
+45

7-16

7-16

65
6.7

dB

dB

10

10

Mechanical specifications

Horizontal Pattern

Vertical Pattern
2 electrical downtilt

Input

2 x 7-16 female

Connector position

1920 2170 MHz: +45/ 45 Polarization

Weight
Wind load

115

63
6.5

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

Bottom
6.6 kg
Frontal:
Lateral:
Rearside:

130 N (at 150 km/h)


110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h

Packing size

1404 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

Vertical Pattern
2 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)

53

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
65
0 8

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 65 18dBi 08T

742 212

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 17.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt
continuously adjustable

0 8

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

67
7

2 x 17.7 dBi

2 x 18 dBi

Horizontal: 65
Vertical:
6.7

Horizontal: 63
Vertical:
6.5

0 8

0 8

0 ... 2 ... 5 ... 8T


0 ... 2 ... 5 ... 8T
17 ... 17 ... 15 .... 15 dB 20 ... 20 ... 18 ... 18 dB

0 ... 2 ... 5 ... 8T


20 ... 20 ... 18 ... 16 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


125

67

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


120

1710 2170
45

1710 2170
+45

7-16

7-16

65
6.7

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

120

2 x 7-16 female

Connector position

63

7.5 kg
Frontal:
Lateral:
Rearside:

130 N (at 150 km/h)


110 N (at 150 km/h)
310 N (at 150 km/h)

6.5

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

200 km/h

Packing size

1574 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

Vertical Pattern
0 8 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

54

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
65
0 10

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 65 18dBi 010T

742 215

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 17.5 dBi

Half-power beam width


Copolar +45/ 45
Electrical tilt
continuously adjustable
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

2 x 17.7 dBi

2 x 18 dBi

Horizontal: 65
Vertical:
6.7

Horizontal: 63
Vertical:
6.5

0 10

0 10

0 10

0 ... 5 ... 10T


16 ... 15 ... 14 dB

0 ... 5 ... 10T


17 ... 16 ... 15 dB

0 ... 5 ... 10T


17 ... 16 ... 15 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Horizontal:
Vertical:

0
60

Isolation, between ports

67
7

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


125

67

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


120

1710 2170
45

1710 2170
+45

7-16

7-16

65
6.7

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

120

2 x 7-16 female

Connector position

63

7.5 kg
Frontal:
Lateral:
Rearside:

130 N (at 150 km/h)


110 N (at 150 km/h)
310 N (at 150 km/h)

6.5

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

200 km/h

Packing size

1574 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

Vertical Pattern
0 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

55

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
65
0 6

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 65 19.5dBi 06T

742 213

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 19 dBi

2 x 19.2 dBi

2 x 19.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 67
Vertical:
4.7

Horizontal: 65
Vertical:
4.5

Horizontal: 63
Vertical:
4.3

Electrical tilt
continuously adjustable

0 6

0 6

0 6

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

0 ... 2 ... 4 ... 6T


0 ... 2 ... 4 ... 6T
18 ... 17 ... 15 .... 15 dB 18 ... 18 ... 17 ... 15 dB

0 ... 2 ... 4 ... 6T


18 ... 18 ... 17 ... 15 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Copolar:
> 30 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


125

67

4.7

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


120

1710 2170
45

1710 2170
+45

7-16

7-16

65

4.5

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

115

2 x 7-16 female

Connector position

63

10 kg
Frontal:
Lateral:
Rearside:

195 N (at 150 km/h)


160 N (at 150 km/h)
480 N (at 150 km/h)

4.3

Max. wind velocity


dB

3
0

Horizontal Pattern

dB

10

10

200 km/h

Packing size

2384 x 172 x 92 mm

Height/width/depth

1942 / 155 / 69 mm

Vertical Pattern
0 6 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

56

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Excellent Sidelobe Suppression

1710 2170
X
88
20 dB

XPol F-Panel 17102170 88 11.5dBi

741 984

Type No.
Frequency range

17102170
1850 1990 MHz

1710 1880 MHz

1920 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 11.3 dBi

2 x 11.5 dBi

2 x 11.6 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Sidelobe suppression
vertical sector 45
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

86
28

Horizontal:
Vertical:

87
26

Horizontal:
Vertical:

88
26

> 20 dB

> 20 dB

> 20 dB

Copolar:
> 23 dB
Total power: > 23 dB

Copolar:
> 23 dB
Total power: > 23 dB

Copolar:
> 23 dB
Total power: > 23 dB

Typically: 20 dB
> 18 dB

Typically: 25 dB
> 18 dB

Typically: 20 dB
> 15 dB

Isolation, between ports

> 30 dB
50

Impedance
VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

150 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


86
155

28

10

dB

dB

10

Horizontal Pattern

Vertical Pattern

1850 1990 MHz: +45/ 45 Polarization

1710 2170
45

1710 2170
+45

7-16

7-16

87
160

26

10

Mechanical specifications

dB

dB

10

Input

Horizontal Pattern

Connector position*

Vertical Pattern

2 x 7-16 female
Bottom or top

Weight

1920 2170 MHz: +45/ 45 Polarization

Wind load

88
160

Max. wind velocity


26

Packing size
Height/width/depth

2 kg
Frontal:
Lateral:
Rearside:

35 N (at 150 km/h)


25 N (at 150 km/h)
80 N (at 150 km/h)
200 km/h

444 x 172 x 92 mm
342 / 155/ 69 mm

10

Horizontal Pattern

dB

dB

10

* Inverted mounting:
Connector position top: Change drain hole screw.

Vertical Pattern

Mounting accessories are not included in the scope of delivery (see page 147 155)

57

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
88
0 10

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 88 14dBi 010T

741 988

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 13.7 dBi

2 x 14 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 88
Vertical: 14.7

Electrical tilt
continuously adjustable

0 10

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
total power
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

Horizontal:
Vertical:

2 x 14.1 dBi

88
14

Horizontal:
Vertical:

0 10

88
13

0 10

0 ... 4 ... 8 ... 10T


0 ... 4 ... 8 ... 10T
0 ... 4 ... 8 ... 10T
18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB 18 ... 18 ... 18 ... 18 dB
> 25 dB
> 25 dB

> 25 dB
> 25 dB

> 25 dB
> 25 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


88
160
14.7

10

dB

dB

10
3

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization

1710 2170
45

1710 2170
+45

7-16

7-16

88
163
14

Mechanical specifications

10

dB

dB

10

Input

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

165
13

Max. wind velocity


10

Horizontal Pattern

dB

dB

10
3

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

88

2 x 7-16 female

Connector position

4.2 kg
Frontal:
Lateral:
Rearside:

65 N (at 150 km/h)


50 N (at 150 km/h)
160 N (at 150 km/h)
200 km/h

Packing size

924 x 172 x 92 mm

Height/width/depth

662 / 155 / 69 mm

Vertical Pattern
0 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

58

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Fixed Electrical Downtilt

1710 2170
X
88
2

XPol F-Panel 17102170 88 17dBi 2T

741 987

Type No.
Frequency range
1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 16.8 dBi

2 x 17 dBi

Horizontal: 88
Vertical:
6.9

Horizontal: 88
Vertical:
6.5

Horizontal: 88
Vertical:
6.2

Electrical tilt

2, fixed

2, fixed

2, fixed

Sidelobe suppression for


first sidelobe above horizon

> 16 dB

> 16 dB

> 16 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Half-power beam width


Copolar +45/ 45

Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

> 30 dB

Impedance

50

VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


88
160

6.9

10

dB

dB

10

Horizontal Pattern

Vertical Pattern
2 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


88

1710 2170
45

1710 2170
+45

7-16

7-16

162

6.5

10

dB

dB

10

Mechanical specifications

Horizontal Pattern

Vertical Pattern
2 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Input

163

6.2

Max. wind velocity


10

Horizontal Pattern

dB

dB

10

Bottom

Weight
Wind load

88

2 x 7-16 female

Connector position

6.5 kg
Frontal:
Lateral:
Rearside:

130 N (at 150 km/h)


110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h

Packing size

1404 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

Vertical Pattern
2 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)

59

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
88
0 8

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 88 17dBi 08T

741 989

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 16.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt
continuously adjustable

0 8

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

88
7

2 x 16.8 dBi

2 x 16.7 dBi

Horizontal: 88
Vertical:
6.7

Horizontal: 88
Vertical:
6.5

0 8

0 8

0 ... 2 ... 5 ... 8T


0 ... 2 ... 5 ... 8T
18 ... 18 ... 16 .... 14 dB 20 ... 20 ... 18 ... 17 dB

0 ... 2 ... 5 ... 8T


18 ... 18 ... 18 ... 17 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 24 dB
Total power: > 24 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


88
165

7
10

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization

1710 2170
45

1710 2170
+45

7-16

7-16

88
165

6.7

Mechanical specifications

10

Input

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

165

6.5

Max. wind velocity


10

Horizontal Pattern

dB

dB

10

Bottom
1x, Position bottom
continuously adjustable

Weight
Wind load

88

2 x 7-16 female

Connector position

7.5 kg
Frontal:
Lateral:
Rearside:

130 N (at 150 km/h)


110 N (at 150 km/h)
310 N (at 150 km/h)
200 km/h

Packing size

1574 x 172 x 92 mm

Height/width/depth

1302 / 155 / 69 mm

Vertical Pattern
0 8 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

60

Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electrical Downtilt

1710 2170
X
88
0 6

set by hand or by optional RCU (remote control unit)


XPol F-Panel 17102170 88 18dBi 06T

741 990

Type No.
Frequency range
Polarization
Gain

1710 1880 MHz

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45

+45, 45

+45, 45

2 x 17.7 dBi

2 x 18 dBi

2 x 18.2 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 88
Vertical:
4.9

Horizontal: 88
Vertical:
4.7

Horizontal: 88
Vertical:
4.5

Electrical tilt
continuously adjustable

0 6

0 6

0 6

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio, copolar
total power
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between ports

0 ... 2 ... 4 ... 6T


0 ... 2 ... 4 ... 6T
0 ... 2 ... 4 ... 6T
17 ... 17 ... 17 ...17 dB 18 ... 18 ... 18 ...18 dB 18 ... 18 ... 18 ...18 dB
> 25 dB
> 25 dB

> 25 dB
> 25 dB

> 25 dB
> 25 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


88
165

4.9
10

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization

1710 2170
45

1710 2170
+45

7-16

7-16

88
165

4.7

Mechanical specifications

10

Input

dB

dB

10

Horizontal Pattern

2 x 7-16 female

Connector position

Vertical Pattern
0 6 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

1x, Position bottom


continuously adjustable

Weight
Wind load

88

Bottom

165

9 kg
Frontal:
Lateral:
Rearside:

195 N (at 150 km/h)


160 N (at 150 km/h)
480 N (at 150 km/h)

4.5

Max. wind velocity


10

Horizontal Pattern

dB

dB

10

200 km/h

Packing size

2214 x 172 x 92 mm

Height/width/depth

1942 / 155 / 69 mm

Vertical Pattern
0 6 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

61

2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

1710 2170 1710 2170


X

65

65

0 10

0 10

set by hand or by optional RCU (remote control unit)


XXPol F-Panel 17102170/17102170 65/65 15/15dBi 010/010T

742 233

Type No.
Frequency range
1710 1880 MHz
Polarization

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45

Gain

4 x 14.7 dBi

4 x 15 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 67
Vertical: 14.5

Electrical tilt
continuously adjustable

0 10

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between inputs

Horizontal:
Vertical:

4 x 15.2 dBi

65
14

Horizontal:
Vertical:

0 10

64
13

0 10

0 ... 4 ... 8 ... 10T


0 ... 4 ... 8 ... 10T
16 ... 16 ... 15 .... 15 dB 18 ... 18 ... 18 ... 18 dB

0 ... 4 ... 8 ... 10T


18 ... 18 ... 18 ... 16 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB
> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


130

67
14.5

10

dB

dB

10

0
0

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


125

1710 2170
+45

1710 2170
45

1710 2170
+45

1710 2170
45

7-16

7-16

7-16

7-16

65
14

dB

dB

Mechanical specifications

10

10

Input

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism
Weight
Wind load

120

4 x 7-16 female

Connector position

64

Bottom
2 x, Position bottom
continuously adjustable
approx. 8.5 kg
Frontal:
Lateral:
Rearside:

290 N (at 150 km/h)


55 N (at 150 km/h)
290 N (at 150 km/h)

13

Max. wind velocity


10

Packing size
dB

dB

10

Height/width/depth

200 km/h
924 x 360 x 130 mm
679 / 322 / 71 mm

0
0

Horizontal Pattern

Vertical Pattern
0 10 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

62

2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

1710 2170 1710 2170


X

65

65

0 8

0 8

set by hand or by optional RCU (remote control unit)


XXPol F-Panel 17102170/17102170 65/65 18/18dBi 08/08T

742 234

Type No.
Frequency range
1710 1880 MHz
Polarization

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45

Gain

4 x 17.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal:
Vertical:

Electrical tilt
continuously adjustable

0 8

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between inputs

66
7

4 x 17.7 dBi

4 x 17.8 dBi

Horizontal: 65
Vertical:
6.7

Horizontal: 64
Vertical:
6.5

0 8

0 8

0 ... 2 ... 5 ... 8T


0 ... 2 ... 5 ... 8T
17 ... 17 ... 15 .... 15 dB 20 ... 20 ... 18 ... 18 dB

0 ... 2 ... 5 ... 8T


20 ... 20 ... 18 ... 16 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


130

66

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


125

1710 2170
+45

1710 2170
45

1710 2170
+45

1710 2170
45

7-16

7-16

7-16

7-16

65
6.7

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

Bottom
2 x, Position bottom
continuously adjustable

Weight
Wind load

120

4 x 7-16 female

Connector position

64

12 kg
Frontal:
Lateral:
Rearside:

570 N (at 150 km/h)


110 N (at 150 km/h)
570 N (at 150 km/h)

6.5

Max. wind velocity


dB

dB

10

10

200 km/h

Packing size

1574 x 320 x 92 mm

Height/width/depth

1304 / 299 / 69 mm

0
0

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

63

2-Multi-band F-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

1710 2170 1710 2170


X

65

65

0 6

0 6

set by hand or by optional RCU (remote control unit)


XXPol F-Panel 17102170/17102170 65/65 19.5/19.5dBi 06/06T

742 235

Type No.
Frequency range
1710 1880 MHz
Polarization

17102170
1850 1990 MHz

1920 2170 MHz

+45, 45; +45, 45 +45, 45; +45, 45 +45, 45; +45, 45

Gain

4 x 19 dBi

4 x 19.2 dBi

4 x 19.5 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 66
Vertical:
4.7

Horizontal: 65
Vertical:
4.5

Horizontal: 64
Vertical:
4.3

Electrical tilt
continuously adjustable

0 6

0 6

0 6

Sidelobe suppression for


first sidelobe above horizon
Front-to-back ratio
Cross polar ratio
Maindirection
Sector

0
60

Isolation, between inputs

0 ... 2 ... 4 ... 6T


0 ... 2 ... 4 ... 6T
18 ... 17 ... 15 .... 15 dB 18 ... 18 ... 17 ... 15 dB

0 ... 2 ... 4 ... 6T


18 ... 18 ... 17 ... 15 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Copolar:
> 25 dB
Total power: > 25 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

Typically: 25 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

300 W (at 50 C ambient temperature)

1710 1880 MHz: +45/ 45 Polarization


130

66

4.7

dB

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

1850 1990 MHz: +45/ 45 Polarization


125

1710 2170
+45

1710 2170
45

1710 2170
+45

1710 2170
45

7-16

7-16

7-16

7-16

65

4.5

Input

dB

dB

Mechanical specifications

10

10

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

1920 2170 MHz: +45/ 45 Polarization

Adjustment
mechanism

64

4.3
10

Max. wind velocity


Packing size

dB

dB

10

Bottom
2 x, Position bottom
continuously adjustable

Weight
Wind load

120

4 x 7-16 female

Connector position

Height/width/depth

18 kg
Frontal:
Lateral:
Rearside:

870 N (at 150 km/h)


230 N (at 150 km/h)
870 N (at 150 km/h)
200 km/h

2384 x 360 x 130 mm


1957 / 322 / 71 mm

0
0

Horizontal Pattern

Vertical Pattern
0 6 electrical downtilt

Mounting accessories are not included in the scope of delivery (see page 147 155)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

64

Dual-band A-Panel
Dual Polarization
Half-power Beam Width

824 960

1710 2170

65

65

XXPol A-Panel 824960/17102170 65/ 65 12/15dBi

742 226

Type No.
Frequency range

824960
17102170
824 894 MHz 880 960 MHz 1710 1880 MHz 1850 1990 MHz 1920 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

+45, 45

+45, 45

Gain

2 x 11.8 dBi

2 x 12 dBi

2 x 14.5 dBi

2 x 15 dBi

2 x 15.2 dBi

Horizontal: 69
Vertical:
34

Horizontal: 66
Vertical:
30

Horizontal: 68
Vertical: 12.6

Horizontal: 67
Vertical: 11.7

Horizontal: 65
Vertical: 11.6

> 15 dB

> 14 dB

> 15 dB

> 16 dB

> 16 dB

Half-power beam width


Copolar +45/ 45
Sidelobe suppression for
first sidelobe above horizon
Front-to-back ratio
(180 30)
Cross polar ratio
Maindirection
Sector

[dB] Copolar:
> 24 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25 Copolar:
> 25
[dB] Total power: > 24 Total power: > 25 Total power: > 25 Total power: > 25 Total power: > 25
0
60

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 16 dB
> 10 dB

Typically: 20 dB
> 10 dB

Typically: 20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

Isolation: Intrasystem
Isolation: Intersystem

> 45 dB (824960 // 17102170 MHz)


50

50

< 1.5

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

< 150 dBc

Max. power per input

250 W
(at 50 C ambient temperature)

200 W
(at 50 C ambient temperature)

824 960 +45/ 45 Polarization

125

1710 2170
45

824 960
45

824 960
+45

1710 2170
+45

7-16

7-16

7-16

7-16

65
30

dB

10

dB

10

0
0

Horizontal Pattern

Vertical Pattern
Mechanical specifications

1710 2170 +45/ 45 Polarization

Input

4 x 7-16 female

Connector position
125

Weight

65

Wind load
12

dB

Max. wind velocity

10

dB

10

Bottom

9.2 kg
Frontal:
Lateral:
Rearside:

120 N (at 150 km/h)


65 N (at 150 km/h)
260 N (at 150 km/h)
200 km/h

Packing size

896 x 287 x 185 mm

Height/width/depth

770 / 270 / 139 mm

Horizontal Pattern

Vertical Pattern

Mounting accessories are not included in the scope of delivery (see page 139 146)

65

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

824 960

1710 2170

65

65

0 14

0 8

set by hand or by optional RCU (remote control unit)


XXPol A-Panel 824960/17102170 65/ 65 14/17dBi 014/08T

742 264

Type No.
Frequency range

824960
824 894 MHz
870 960 MHz

17102170
1710 1880 MHz 1850 1990 MHz 1920 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

+45, 45

+45, 45

Gain

2 x 14 dBi

2 x 14 dBi

2 x 16.5 dBi

2 x 16.8 dBi

2 x 17 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 68
Vertical:
16

Horizontal: 65
Vertical: 14.5

Horizontal: 65
Vertical:
7.8

Horizontal: 65
Vertical:
7.3

Horizontal: 63
Vertical:
6.8

Electrical tilt
continuously adjustable

0 14

0 14

0 8

0 8

0 8

Sidelobe suppression for


first sidelobe above horizon

0 ... 7 ... 14T 0 ... 7 ... 14T


0 ... 4 ... 8T
0 ... 4 ... 8T
0 ... 4 ... 8T
14 ... 14 ... 13 dB 14 ... 14 ... 13 dB 14 ... 14 ... 14 dB 16 ... 16 ... 15 dB 15 ... 16 ... 15 dB

Front-to-back ratio, copolar

> 26 dB

> 26 dB

> 25 dB

> 25 dB

> 25 dB

Cross polar ratio


Maindirection
Sector

Typically:
20 dB
> 10 dB

Typically:
20 dB
> 10 dB

Typically:
16 dB
> 10 dB

Typically:
18 dB
> 10 dB

Typically:
20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

0
60

Isolation: Intrasystem
Isolation: Intersystem

> 50 dB (824 960 // 1710 2170 MHz)

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

250 W

50

50

< 1.5

< 1.5

< 150 dBc


200 W
(at 50 C ambient temperature)

824 960 +45/ 45 Polarization

125

65
14.5

dB

0
0

Horizontal Pattern

1710 2170
45

824 960
45

824 960
+45

1710 2170
+45

7-16

7-16

7-16

7-16

dB

10

10

Vertical Pattern
0 14 electrical downtilt
Mechanical specifications

1710 2170 +45/ 45 Polarization

Input

4 x 7-16 female

Connector position
120

Adjustment
mechanism

65
7

Horizontal Pattern

dB

10

dB

Vertical Pattern
0 8 electrical downtilt

2 x, Position bottom
continuously adjustable

Weight
Wind load

10

Bottom

Max. wind velocity

16.5 kg
Frontal:
Lateral:
Rearside:

230 N (at 150 km/h)


180 N (at 150 km/h)
430 N (at 150 km/h)
200 km/h

Packing size

1615 x 302 x 192 mm

Height/width/depth

1316 / 262 / 139 mm

Clamp 731 651 and mechanical downtilt kits are not allowed.
Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

66

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

824 960

1710 2170

65

65

010

0 6

set by hand or by optional RCU (remote control unit)


XXPol A-Panel 824960/17102170 65/ 65 16/18.5dBi 010/06T

742 265

Type No.
Frequency range

824960
824 894 MHz
880 960 MHz

17102170
1710 1880 MHz 1850 1990 MHz 1920 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

+45, 45

+45, 45

Gain

2 x 15.5 dBi

2 x 16 dBi

2 x 17.8 dBi

2 x 18.2 dBi

2 x 18.3 dBi

Half-power beam width


Copolar +45/ 45

Horizontal: 68
Vertical: 10.5

Horizontal: 65
Vertical:
10

Horizontal: 66
Vertical:
5.2

Horizontal: 65
Vertical:
5.0

Horizontal: 63
Vertical:
4.7

Electrical tilt
continuously adjustable

0.59.5

0.59.5

0 6

0 6

0 6

Sidelobe suppression for


first sidelobe above horizon

0 ... 5 ... 10T 0 ... 5 ... 10T


0 ... 3 ... 6T
0 ... 3 ... 6T
0 ... 3 ... 6T
16 ... 16 ... 17 dB 18 ... 18 ... 18 dB 14 ... 13 ... 13 dB 18 ... 17 ... 14 dB 18 ... 17 ... 14 dB

Front-to-back ratio, copolar

> 27 dB

> 25 dB

> 25 dB

> 25 dB

> 25 dB

Cross polar ratio


Maindirection
Sector

Typically:
20 dB
> 10 dB

Typically:
20 dB
> 10 dB

Typically:
16 dB
> 10 dB

Typically:
18 dB
> 10 dB

Typically:
18 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

0
60

Isolation: Intrasystem
Isolation: Intersystem

> 50 dB (824 960 // 1710 2170 MHz)

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

250 W

50

50

< 1.5

< 1.5

< 150 dBc


200 W
(at 50 C ambient temperature)

824 960 +45/ 45 Polarization

125

65

10

dB

1710 2170
45

824 960
45

824 960
+45

1710 2170
+45

7-16

7-16

7-16

7-16

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
0.59.5 electrical downtilt

Input

1710 2170 +45/ 45 Polarization

120

Mechanical specifications
4 x 7-16 female

Connector position
Adjustment
mechanism

65

Bottom
2x, Position bottom
continuously adjustable

Weight
5

dB

Horizontal Pattern

dB

10

10

Wind load

Vertical Pattern
0 6 electrical downtilt

Max. wind velocity

23 kg
Frontal:
Lateral:
Rearside:

340 N (at 150 km/h)


280 N (at 150 km/h)
640 N (at 150 km/h)
200 km/h

Packing size

2215 x 302 x 192 mm

Height/width/depth

1916 / 262 / 139 mm

Clamp 731 651 and mechanical downtilt kits are not allowed.
Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

67

Dual-band A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

824 960

1710 2170

65

65

07

0 6

set by hand or by optional RCU (remote control unit)


XXPol A-Panel 824960/17102170 65/ 65 17/18.5dBi 07/06T

742 266

Type No.
Frequency range

824960
17102170
824 894 MHz 880 960 MHz 1710 1880 MHz 1850 1990 MHz 1900 2170 MHz

Polarization

+45, 45

+45, 45

+45, 45

+45, 45

+45, 45

Gain

2 x 16.5 dBi

2 x 17 dBi

2 x 17.8 dBi

2 x 18.2 dBi

2 x 18.5 dBi

Half-power beam width


Copolar +45/ -45

Horizontal: 68
Vertical:
7.8

Horizontal: 65
Vertical:
7.3

Horizontal: 66
Vertical:
5.2

Horizontal: 65
Vertical:
5.0

Horizontal: 63
Vertical:
4.7

Electrical tilt
continuously adjustable

07

07

0 6

0 6

0 6

Sidelobe suppression for


first sidelobe above horizon

0 ... 4 ... 7T
0 ... 4 ... 7T
0 ... 3 ... 6T
0 ... 3 ... 6T
0 ... 3 ... 6T
16 ... 16 ... 14 dB 16 ... 16 ... 14 dB 14 ... 13 ... 13 dB 18 ... 17 ... 14 dB 18 ... 17 ... 14 dB

Front-to-back ratio, copolar

> 27 dB

> 27 dB

> 25 dB

> 25 dB

> 25 dB

Cross polar ratio


Maindirection
Sector

Typically:
20 dB
> 10 dB

Typically:
20 dB
> 10 dB

Typically:
16 dB
> 10 dB

Typically:
18 dB
> 10 dB

Typically:
20 dB
> 10 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

> 30 dB

Impedance

50

50

50

VSWR

< 1.5

< 1.5

< 1.5

0
60

Isolation: Intrasystem
Isolation: Intersystem

> 45 dB (824960 // 17102170 MHz)

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

250 W

50

50

< 1.5

< 1.5

< 150 dBc


200 W
(at 50 C ambient temperature)

824 960 +45/ 45 Polarization

125

65

7.5

dB

1710 2170
45

824 960
45

824 960
+45

1710 2170
+45

7-16

7-16

7-16

7-16

dB

10

10

0
0

Horizontal Pattern

Vertical Pattern
07 electrical downtilt

Mechanical specifications
Input

1710 2170 +45/ 45 Polarization

120

4 x 7-16 female

Connector position
Adjustment
mechanism

65

Bottom
2x, Position bottom
continuously adjustable

Weight
5

dB

Horizontal Pattern

dB

10

10

Wind load

Vertical Pattern
0 6 electrical downtilt

Max. wind velocity

28 kg
Frontal:
Lateral:
Rearside:

460 N (at 150 km/h)


380 N (at 150 km/h)
860 N (at 150 km/h)
200 km/h

Packing size

2790 x 287 x 177 mm

Height/width/depth

2580 / 262 / 139 mm

Clamp 731 651 and mechanical downtilt kits are not allowed.
Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

68

Triple-multiband A-Panel
Dual Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

824 960

1710 2170 1710 2170

65

65

65

07

0 8

0 8

set by hand or by optional RCU (remote control unit)


XXXPol A-Panel 824960/17102170/17102170 65/ 65/65 17/17/16.5dBi 07/08/08T

742 241

Type No.
Frequency range

824960
824 894 MHz
880 960 MHz
+45, 45
+45, 45
2 x 16.5 dBi
2 x 17 dBi

17102170 17102170
1710 1880 MHz 1850 1990 MHz 1920 2170 MHz
+45, 45
+45, 45
+45, 45

Polarization
Gain: 824960 MHz
17102170 MHz (Syst. 1)
2 x 16.5 dBi
2 x 16.8 dBi
2 x 17 dBi
17102170 MHz (Syst. 2)
2 x 16 dBi
2 x 16.3 dBi
2 x 16.5 dBi
Half-power beam width
Horizontal: 68 Horizontal: 65 Horizontal: 65 Horizontal: 65 Horizontal: 63
Copolar +45/ 45
Vertical:
8.1 Vertical:
7.5 Vertical:
7.8 Vertical:
7.3 Vertical:
6.8
Electrical tilt
0.57
0.57
0 8
0 8
0 8
continuously adjustable
Sidelobe suppression for
0 ... 4 ... 7T
0 ... 4 ... 7T
0 ... 4 ... 8T
0 ... 4 ... 8T
0 ... 4 ... 8T
first sidelobe above horizon 16 ... 16 ... 14 dB 16 ... 16 ... 14 dB 14 ... 14 ... 14 dB 16 ... 16 ... 15 dB 15 ... 16 ... 15 dB
Front-to-back ratio, copolar
> 26 dB
> 26 dB
> 25 dB
> 25 dB
> 25 dB
Cross polar ratio
Typically:
Typically:
Typically:
Typically:
Typically:
Maindirection
0
20 dB
20 dB
16 dB
18 dB
20 dB
Sector
60
> 10 dB
> 10 dB
> 10 dB
> 10 dB
> 10 dB
Isolation: Intrasystem
> 30 dB
> 30 dB
> 30 dB
> 30 dB
> 30 dB
Isolation: Intersystem
> 50 dB (824 960 // 1710 2170 MHz)11
> 38 dB (1710 2170 // 1710 2170 MHz)
Impedance
50
50
50
50
50
VSWR
< 1.5
< 1.5
< 1.5
< 1.5
< 1.5
Intermodulation IM3
< 150 dBc
< 150 dBc
(2 x 43 dBm carrier)
Max. power per input
250 W
200 W
(at 50 C ambient temperature)

824 960 +45/ 45 Polarization


125

65

dB

dB

10

10

824 960
+45

0
0

Horizontal Pattern

Vertical Pattern
0.57 electrical downtilt

1710 1880 +45/ 45 Polarization


125

824 960
45

1710 2170
+45

1710 2170
45

7-16

7-16

65

7-16

1710 2170
+45

1710 2170
45

7-16

7-16

7-16

7.5

Mechanical specifications
10

Input

dB

dB

10

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt

Adjustment
mechanism

Wind load
63

6.5

dB

3
0

dB

10

10

Bottom
3 x, Position bottom
continuously adjustable

Weight

1920 2170 +45/ 45 Polarization


115

6 x 7-16 female

Connector position

Max. wind velocity

34 kg
Frontal:
Lateral:
Rearside:

470 N (at 150 km/h)


400 N (at 150 km/h)
880 N (at 150 km/h)
200 km/h

Packing size

2930 x 302 x 202 mm

Height/width/depth

2630 / 262 / 149 mm

Horizontal Pattern

Vertical Pattern
0 8 electrical downtilt
Clamp 731 651 and mechanical downtilt kits are not allowed.
Mounting accessories are not included in the scope of delivery (see page 139 146)
For more information about downtilt adjustment and preparation for Remote Control Unit (RCU) refer to pages 135 138

69

Multi-band Bidirectional Antenna


Vertical Polarization
Half-power Beam Width

824 960/1710 2170


V
65

VPol BiDir 824960/17102170 65 5dBi


Type No.

738 445

738 446

Input

1 x 7-16 female

1 x N female

Frequency range

824 960 MHz, 1710 2170 MHz


< 1.5
824 960 MHz: 5 dBi
1710 1880 MHz: 5.5 dBi
1880 2170 MHz: 6.5 dBi

Impedance

50

Polarization

Vertical

Max. power (total)

372 mm

Gain

400 mm

VSWR

200 W (at 50 C ambient temperature)

Weight

0.8 kg

Wind load

Frontal:
Lateral:
Rearside:

Max. wind velocity

25 N (at 150 km/h)


65 N (at 150 km/h)
35 N (at 150 km/h)
200 km/h

Packing size

422 x 212 x 95 mm

Height/width/depth

310 / 55 / 190 mm

Material:

Radiator: Tin plated copper.


Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.

Mounting:

Wall mounting: No additional mounting kit


needed.
For pipe mast mounting use clamps listed on the
datasheet (order separately).

Ice protection:

The radiating system is protected by the radome.


Due to its very sturdy construction, the antenna
remains operational even under icy conditions.

Grounding:

All metal parts of the antenna as well as the


inner conductor are DC grounded.

8.5 mm

dB

10

Typical Horizontal Pattern

70

Logarithmic Periodic
Vertical Polarization
Half-power Beam Width

806 2170
V
65

VPol LogPer 8062170 65 11dBi


Type No.

742 192

Input

1 x 7-16 female

Connector position

Bottom

Frequency range

806 1000 MHz

1000 1700 MHz

1700 2170 MHz

VSWR

< 1.5

< 1.5

< 1.5

Gain

11 dBi

11.3 dBi

11.5 dBi

Impedance

50

50

50

Polarization

Vertical

Vertical

Vertical

Front-to-back ratio

> 25 dB

> 25 dB

> 23 dB

65
55

55
50

50
45

Half-power Beam Width


horizontal
vertical
Max. power

300 W

250 W
200 W
(at 50 C ambient temperature)

Weight

5.7 kg

Wind load

Frontal:
Lateral:
Rearside:

Max. wind velocity

20 N (at 150 km/h)


260 N (at 150 km/h)
30 N (at 150 km/h)
200 km/h

Packing size

360 x 175 x 1000 mm

Height/width/depth

300 / 155 / 785 mm

Material:

Radiator: Weather-proof aluminum.


Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting:

The antenna can be mounted on tubular mast with a


diameter of 30 70 mm with supplied clamps.

Ice protection:

Due to the very sturdy antenna construction and the


protection of the radiating system by the radome, the
antenna remains operational even under icy conditions.

Grounding:

All metal parts of the antenna as well as the inner


conductor are DC grounded.

806 1000 MHz

1700 2170 MHz

Horizontal Pattern

Vertical Pattern

45

10
dB

10
dB

10
dB

10

50

55

Horizontal Pattern

dB

65

Vertical Pattern

71

Additional Components
Filter Products
UMTS / WCDMA
Duplexer UMTS
782 10192

1920 1980 / 2110 2170 MHz

Dual-band Combiner
793 362
793 363 (double)

800 1000 / 1700 2170 MHz


800 1000 / 1700 2170 MHz

793 423
793 424 (double)

793 362

793 363

793 423

793 424

793 425

793 426

1710 1880 /1920 2170 MHz


1710 1880 /1920 2170 MHz

Triple-band Combiner
793 425
793 426 (double)

880 960 / 1710 1880 / 1920 2170 MHz


880 960 / 1710 1880 / 1920 2170 MHz

Double Tower Mounted Amplifiers


782 10071
782 10072

(12 dB gain)
(24 dB gain)

1920 1980 / 2110 2170 MHz


1920 1980 / 2110 2170 MHz

Bias Tee
793 304

800 2170 MHz

DC-Stop
793 301

800 2170 MHz

Band-pass Filter
793 540

1710 1880 MHz

72

Additional Components
Filter Products
UMTS / WCDMA
Low-pass Filter
793 539

876 960 MHz

3-dB-Coupler
793 006
793 554

1700 2200 MHz


800 2200 MHz

3-dB-Coupler with Cable Absorber


792 702

1700 2200 MHz

For more information please contact following e-mail:


filteramp@kathrein.de

73

74

Summary Directional Antennas


Vertical Polarization
800/900
Vertical Polarization 800/900
Type

Type No.

Height
[mm]

Connector
position

Page

735 727

500

bottom

77

VPol Panel

870960

20

16.5dBi

VPol ParPanel

870960

36

20dBi

K 73 45 64 7

2250

bottom

78

790960
8062170

51
65

12dBi
11dBi

K 73 22 67
742 192

300
300

bottom
bottom

79
71

VPol Panel

860960

65

9dBi

730 677

264

bottom or top

80

VPol Panel
VPol Panel
VPol Panel

870960
806960
870960

65
65
65

15.5dBi
15.5dBi
15dBi

6T
315T

730 368
732 691
737 906

1294
1294
1294

bottom
bottom
bottom

80
81
82

VPol Panel
VPol Panel
VPol Panel

870960
870960
870960

65
65
65

17dBi
17dBi
17dBi

4.5T
9T

730 691
735 811
737 547

1934
1934
1934

rearside
rearside
rearside

81
83
83

VPol Panel

870960

65

18dBi

739 854

2254

rearside

84

VPol Panel
VPol Panel

870960
870960

65
65

18.5dBi
18.5dBi

730 376
732 689

2574
2574

rearside
bottom

84
85

VPol F-Panel
VPol F-Panel

872960
872960

90
90

7.5dBi
7.5dBi

736 622
736 854

262
262

bottom or top
bottom or top

86
86

VPol F-Panel

872960

90

10dBi

736 855

502

bottom or top

86

VPol Panel

870960

90

14dBi

730 370

1294

bottom

87

VPol Panel
VPol Panel
VPol F-Panel

870960
870960
872960

90
90
90

15.5dBi
15.5dBi
16.5dBi

732 967
741 067
736 866

1934
1934
2422

rearside
rearside
bottom or top

87
88
89

VPol Panel
VPol Panel

870960
870960

90
90

17dBi
17dBi

730 378
737 549

2574
2574

rearside
rearside

90
90

VPol Panel

870960

105

16.5dBi

730 380

2574

rearside

91

VPol Panel

870960

120

15.5dBi

739 856

2254

rearside

92

VPol Panel

870960

120

16dBi

730 382

2574

rearside

92

VPol LogPer
VPol LogPer

Additional versions on request

6T

6T

6T

Broadband also suitable


for UMTS

75

Summary Directional Antennas


Vertical Polarization
1800/1900
Vertical Polarization
Type

Type No.

Height
[mm]

Connector
position

Page

VPol F-Panel

17101990

33

22.5dBi

739 136

1942

bottom or top

93

VPol F-Panel

17101900

65

10dBi

734 304

182

bottom or top

94

VPol F-Panel

17101900

65

18dBi

735 147

1302

bottom

94

VPol F-Panel

17101900

90

8dBi

734 318

182

bottom or top

95

VPol F-Panel

17101900

90

16.5dBi

2T

734 328

1302

bottom

95

VPol F-Panel

17101900

90

17.5dBi

2T

734 330

1942

bottom

96

2T

Additional versions on request

76

Panel
Vertical Polarization
Half-power Beam Width

870 960
V
20

VPol Panel 870960 20 16.5dBi

735 727

Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Front-to-back-ratio
Half-power Beam Width
Max. power
Weight
Wind load

7-16 female
870 960 MHz
< 1.3
16.5 dBi
50
Vertical
> 24 dB
H-plane: 20/ E-plane: 33
500 W (at 50 C ambient temperature)
10 kg
Frontal:
500 N (at 150 km/h)
Lateral:
110 N (at 150 km/h)
Rearside: 715 N (at 150 km/h)
230 km/h
1062 x 562 x 275 mm
492 / 992 / 190 mm

Max. wind velocity


Packing size
Height/width/depth
Material:

Radiator: Aluminum.
Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: White.
All screws and nuts: Stainless steel.

Ice protection:

Due to the very sturdy antenna construction and


the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.

Grounding:

All metal parts of the antenna as well as


the inner conductor are DC grounded.

Accessories (order separately)


Type No.
14
14
14
14

02
03
04
05

2
2
2
2

clamps
clamps
clamps
clamps

Remarks
Mast: 60 115 mm diameter
Mast: 115 210 mm diameter
Mast: 210 380 mm diameter
Mast: 380 521 mm diameter

33

20

10

10

Horizontal Pattern

dB

61
61
61
61

dB

K
K
K
K

Description

K 61 14 03

Vertical Pattern

77

Parabolic Panel
Vertical Polarization
Half-power Beam Width

870 960
V
36

VPol ParPanel 870960 36 20dBi

K 73 45 64 7

Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Front-to-back ratio
Half-power Beam Width
Max. power
Weight
Wind load

7-16 female
870 960 MHz
< 1.3
20 dBi
50
Vertical
> 30 dB
H-plane: 36/ E-plane: 8
500 W (at 50 C ambient temperature)
30 kg
Frontal:
950 N (at 150 km/h)
Lateral:
600 N (at 150 km/h)
Rearside: 950 N (at 150 km/h)
200 km/h
2420 x 640 x 465 mm
2250 / 591 / 406 mm

Max. wind velocity


Packing size
Height/width/depth
Material:

Radiator: Weather-proof aluminum.


Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Ice protection:

Due to the very sturdy antenna construction and


the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.

Grounding:

All metal parts of the antenna are DC grounded.


The inner conductor is coupled capacitively.

2360

2300

2250

429

Accessories (order separately)

733 736
K 61 14 03
K 61 14 04
K 61 14 05
733 695

2
2
2
2
1

clamps
clamps
clamps
clamps
downtilt kit

Remarks
Mast: 50 125 mm diameter
Mast: 115 210 mm diameter
Mast: 210 380 mm diameter
Mast: 380 521 mm diameter
Downtilt angle: 0 10
Use the downtilt kit together
with 2 clamps suitable for
the mast diameter.

11

13
140

Description

591

Type No.

406

36

10

3
0

Horizontal Pattern

dB

dB

10

Vertical Pattern
K 61 14 03

78

Logarithmic periodic
Vertical Polarization
Half-power Beam Width

790 960
V
51

VPol LogPer 790960 51 12dBi

K 73 22 67

Type No.
Input
Frequency range
VSWR
Gain
Impedance
Polarization
Side-lobe supression
Front-to-back ratio
Half-power Beam Width
Max. power
Weight
Wind load

7-16 female
790 960 MHz
< 1.4
12 dBi
50
Vertical
> 25 dB
> 30 dB
H-plane: 51/ E-plane: 45
500 W (at 50 C ambient temperature)
6.3 kg
Frontal:
20 N (at 150 km/h)
Lateral:
260 N (at 150 km/h)
Rearside:
30 N (at 150 km/h)
200 km/h
1000 x 360 x 175 mm
300 / 155 / 785 mm

Max. wind velocity


Packing size
Height/width/depth
Material:

Radiator: Weather-proof aluminum.


Reflector screen: Weather-proof aluminum.
Radome: Fiberglass, colour: Grey.
All screws and nuts: Stainless steel.

Mounting:

The antenna can be mounted on tubular mast


with a diameter of 30 70 mm with supplied
clamps.

Ice protection:

Due to the very sturdy antenna construction and


the protection of the radiating system by the
radome, the antenna remains operational even
under icy conditions.

Grounding:

All metal parts of the antenna as well as


the inner conductor are DC grounded.

51

Horizontal Pattern

dB

10

dB

10

45

Vertical Pattern

79

Eurocell Panel
Vertical Polarization
Half-power Beam Width

900
V
65

VPol Panel 860960 65 9dBi


Type No.

730 677

Frequency range

860 960 MHz

Polarization

65

120

Vertical

Gain

9 dBi

> 25 dB (890 960 MHz)


> 20 dB (860 890 MHz)

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

Horizontal Pattern

< 150 dBc

70

350 W (at 50 C ambient temperature)

Input

N female

Connector position

10

Bottom or top

Weight
Wind load (at 150 km/h)

1.2 kg
Frontal / Lateral / Rearside:
40 N / 25 N / 90 N

Max. wind velocity

230 km/h

Height/width/depth

264 / 258 / 103 mm

dB

Front-to-back ratio

H-plane: 65
E-plane: 70

dB

10

Half-power beam width

Vertical Pattern

VPol Panel 870960 65 15.5dBi


Type No.

730 368

Frequency range

870 960 MHz

Polarization
Gain

120

65

Vertical
15.5 dBI

> 25 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight

3
0

Horizontal Pattern

< 150 dBc


500 W (at 50 C ambient temperature)

13

7-16 female
Bottom

10

6 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


220 N / 140 N / 490 N

Max. wind velocity

200 km/h

Height/width/depth

1294 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Front-to-back ratio

H-plane: 65
E-plane: 13

dB

10

Half-power beam width

Vertical Pattern

80

Eurocell Panel
Vertical Polarization
Half-power Beam Width

800/900
V
65

VPol Panel 806960 65 15.5dBi 6T


Type No.

732 691

Frequency range

806 960 MHz

Polarization

Vertical

Gain

15.5 dBi

120

65

H-plane: 65
E-plane: 13

Electrical downtilt

6, fixed

Front-to-back ratio

> 25 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

Horizontal Pattern

< 150 dBc


13

500 W (at 50 C ambient temperature)

Input

7-16 female

Connector position

10

Bottom
3

Weight

6 kg

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


220 N / 140 N / 490 N

Max. wind velocity

200 km/h

Height/width/depth

1294 / 258 / 103 mm

dB

Max. power

dB

10

Half-power beam width

Vertical Pattern
6 electrical downtilt

VPol Panel 870960 65 17dBi


Type No.

730 691

Frequency range

870 960 MHz

Polarization
Gain

120

65

Vertical
17 dBi

Front-to-back ratio

H-plane: 65
E-plane: 8.5
> 25 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

dB

10

Half-power beam width

Horizontal Pattern

< 150 dBc


500 W (at 50 C ambient temperature)
8.5

Connector position
Weight

7-16 female
Rearside

10

9 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


340 N / 220 N / 750 N

Max. wind velocity

200 km/h

Height/width/depth

1934 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Vertical Pattern

81

Eurocell Panel
Vertical Polarization
Half-power Beam Width
Adjust. Electr. Downtilt

870 960
V
65
315

VPol Panel 870960 65 15dBi 315T


Type No.

737 906

Frequency range

870 960 MHz

Polarization

Vertical

Gain

15 dBi

Half-power beam width

H-plane: 65
E-plane: 14

Electrical downtilt

315, adjustable in 1 steps

Side lobe suppression

> 14 dB (0... 40 above horizon)

Front-to-back ratio

> 25 dB

Impedance

50

VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

500 W (at 50 C ambient temperature)

120

65

dB

10

Horizontal Pattern

To set electrical downtilt:


push the lever towards
the antenna.
align to the desired
setting.
let the lever click into
position.

14

dB

10

Vertical Pattern
7 electrical downtilt

Mechanical specifications
Input
15

Connector position

Bottom

Weight

10

dB

Wind load
3

7-16 female

Vertical Pattern
15 electrical downtilt

Max. wind velocity

7 kg
Frontal:
Lateral:
Rearside:

220 N (at 150 km/h)


140 N (at 150 km/h)
490 N (at 150 km/h)
200 km/h

Packing size

1422 x 302 x 160 mm

Height/width/depth

1294 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

82

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
65

VPol Panel 870960 65 17dBi 4.5T


Type No.

735 811

Frequency range

870 960 MHz

Polarization

Vertical

Gain

17 dBi

120

65

H-plane: 65
E-plane: 8.5

Electrical downtilt

4.5, fixed

Front-to-back ratio

> 25 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

Horizontal Pattern

< 150 dBc


8.5

500 W (at 50 C ambient temperature)

Input

7-16 female

Connector position

10

Rearside
3

Weight

dB

Max. power

dB

10

Half-power beam width

9 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


340 N / 220 N / 750 N

Max. wind velocity

200 km/h

Height/width/depth

1934 / 258 / 103 mm

Vertical Pattern
4.5 electrical downtilt

VPol Panel 870960 65 17dBi 9T


Type No.

737 547

Frequency range

870 960 MHz

Polarization
Gain

120

65

Vertical
17 dBi

Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position

9, fixed
> 25 dB

3
0

Horizontal Pattern

50
< 1.3
< 150 dBc
9

500 W (at 50 C ambient temperature)


7-16 female

10

Rearside
3

Weight
Wind load (at 150 km/h)

9 kg
Frontal / Lateral / Rearside:
340 N / 220 N / 750 N

Max. wind velocity

200 km/h

Height/width/depth

1934 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Electrical downtilt

H-plane: 65
E-plane: 8.5

dB

10

Half-power beam width

Vertical Pattern
9 electrical downtilt

83

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
65

VPol Panel 870960 65 18dBi


Type No.

739 854

Frequency range

870 960 MHz

Polarization

Vertical

Gain

18 dBi

120

65

H-plane: 65
E-plane: 7.5

Front-to-back ratio

> 25 dB
50

Impedance
VSWR

Horizontal Pattern

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

dB

10

Half-power beam width

< 150 dBc


400 W (at 50 C ambient temperature)
7.5

7-16 female

Connector position

Rearside

Weight

10

10.5 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


400 N / 260 N / 890 N

Max. wind velocity

180 km/h

Height/width/depth

2254 / 258 / 103 mm

dB

Input

Vertical Pattern

VPol Panel 870960 65 18.5dBi


Type No.

730 376

Frequency range

870 960 MHz

Polarization
Gain

120

65

Vertical
18.5 dBi

Front-to-back ratio

H-plane: 65
E-plane: 6.5
> 25 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

dB

10

Half-power beam width

Horizontal Pattern

< 150 dBc


500 W (at 50 C ambient temperature)
6.5

Connector position
Weight

7-16 female
Rearside

10

12 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Vertical Pattern

84

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
65

VPol Panel 870960 65 18.5dBi 6T


Type No.

732 689

Frequency range

870 960 MHz

Polarization

Vertical

Gain

18.5 dBi

120

65

H-plane: 65
E-plane: 6.5

Electrical downtilt

6, fixed

Front-to-back ratio

> 25 dB

Impedance

50

VSWR

< 1.3

Max. power
Input
Connector position

Horizontal Pattern

< 150 dBc


6.5

500 W (at 50 C ambient temperature)


7-16 female

10

Rearside
3

Weight

dB

Intermodulation IM3
(2 x 43 dBm carrier)

dB

10

Half-power beam width

12 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

Vertical Pattern
6 electrical downtilt

85

F-Panel
Vertical Polarization
Half-power Beam Width

872 960
V
90

VPol F-Panel 872960 90 7.5dBi

Frequency range

736 854
Vertical

Gain

7.5 dBi

Half-power beam width

H-plane: 90
E-plane: 70

Front-to-back ratio

3
0

50

VSWR

Horizontal Pattern

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

Input

10

> 20 dB

Impedance

Max. power

180

872 960 MHz

Polarization

90

< 140 dBc


70

350 W (at 50 C ambient temperature)


7-16 female

Connector position

N female

Bottom or top

Weight

10

1.5 kg
3

Wind load (at 150 km/h)

dB

736 622

Frontal / Lateral / Rearside:


45 N / 20 N / 60 N (at 150 km/h)

Max. wind velocity

200 km/h

Height/width/depth

262 / 155 / 49 mm

dB

Type No.

Vertical Pattern

VPol F-Panel 872960 90 10dBi

Polarization
Gain
Half-power beam width
Front-to-back ratio

872 960 MHz


Vertical
10 dBi
H-plane: 90
E-plane: 36
> 20 dB

Impedance

50

VSWR

< 1.4

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Wind load (at 150 km/h)

90
180

10
3

dB

Frequency range

736 855

Horizontal Pattern

< 150 dBc


400 W (at 50 C ambient temperature)

36

7-16 female
Bottom or top
2.3 kg
Frontal / Lateral / Rearside:
90 N / 40 N / 110 N

Max. wind velocity

200 km/h

Height/width/depth

502 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

10

dB

Type No.

Vertical Pattern

86

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
90

VPol Panel 870960 90 14dBi

730 370

Frequency range

870 960 MHz

Polarization

Vertical

Gain

14 dBi

Half-power beam width

H-plane: 90
E-plane: 13

Front-to-back ratio

> 23 dB
50

Impedance
VSWR

180

10
3
0

Horizontal Pattern

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc


500 W (at 50 C ambient temperature)

Input

13

7-16 female

Connector position

Bottom

Weight

10

6 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


220 N / 140 N / 490 N

Max. wind velocity

200 km/h

Height/width/depth

1294 / 258 / 103 mm

dB

Max. power

90

dB

Type No.

Vertical Pattern

VPol Panel 870960 90 15.5dBi

Frequency range
Polarization
Gain
Half-power beam width
Front-to-back ratio

732 967
870 960 MHz
Vertical
15.5 dBi
H-plane: 90
E-plane: 8.5
> 23 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

90
180

10
3

dB

Type No.

Horizontal Pattern

< 150 dBc


500 W (at 50 C ambient temperature)
8.5

Connector position
Weight

7-16 female
Rearside

10

9 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


340 N / 220 N / 750 N (at 150 km/h)

Max. wind velocity

200 km/h

Height/width/depth

1934 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Vertical Pattern

87

Eurocell Panel
Vertical Polarization
Half-power Beam Width
Fixed Electrical Downtilt

870 960
V
90
6

VPol Panel 870960 90 15.5dBi 6T

741 067

Frequency range

870 960 MHz

Polarization

Vertical

Gain

15.5 dBi
H-plane: 90
E-plane: 9

Electrical downtilt

6, fixed

Front-to-back ratio

> 22 dB

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position

3
0

Horizontal Pattern

< 150 dBc


9

500 W (at 50 C ambient temperature)


7-16 female

10

Rearside
3

Weight
Wind load (at 150 km/h)

9 kg
Frontal / Lateral / Rearside:
340 N / 220 N / 750 N

Max. wind velocity

200 km/h

Height/width/depth

1934 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Half-power beam width

90
180

dB

Type No.

Vertical Pattern
6 electrical downtilt

88

F-Panel
Vertical Polarization
Half-power Beam Width

872 960
V
90

VPol F-Panel 872960 90 16.5dBi

736 866

Frequency range

872 960 MHz

Polarization

Vertical

Gain

16.5 dBi

Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight

H-plane: 90
E-plane: 7
> 20 dB
50

180

10
3
0

Horizontal Pattern

< 1.4
< 150 dBc
400 W (at 50 C ambient temperature)
7

7-16 female
Bottom or top

10

9 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


490 N / 230 N / 620 N

Max. wind velocity

180 km/h

Height/width/depth

2422 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

dB

Half-power beam width

90

dB

Type No.

Vertical Pattern

89

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
90

VPol Panel 870960 90 17dBi

730 378

Frequency range

870 960 MHz

Polarization

Vertical

Gain

17 dBi

Half-power beam width

H-plane: 90
E-plane: 6.5

Front-to-back ratio

> 23 dB
50

Impedance
VSWR

180

10
3
0

Horizontal Pattern

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

90

dB

Type No.

< 150 dBc


500 W (at 50 C ambient temperature)
6.5

7-16 female

Connector position

Rearside

Weight

10

12 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

dB

Input

Vertical Pattern

VPol Panel 870960 90 17dBi 6T

Polarization
Gain
Half-power beam width
Electrical downtilt
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position

870 960 MHz

90
180

Vertical
17 dBi
H-plane: 90
E-plane: 6.5
6, fixed
> 23 dB

10
3
0

Horizontal Pattern

50
< 1.3
< 150 dBc
6.5

500 W (at 50 C ambient temperature)


7-16 female

10

Rearside
3

Weight

dB

Frequency range

737 549

dB

Type No.

12 kg
0

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

Vertical Pattern
6 electrical downtilt

90

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
105

VPol Panel 870960 105 16.5dBi

730 380

Frequency range

870 960 MHz

Polarization

Vertical

Gain

16.5 dBi

Half-power beam width


Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

H-plane: 105
E-plane: 6.5
> 22 dB
50

105
195

dB

Type No.

Horizontal Pattern

< 1.3
< 150 dBc
500 W (at 50 C ambient temperature)
6.5

Connector position
Weight

7-16 female
Rearside

10

12 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Vertical Pattern

91

Eurocell Panel
Vertical Polarization
Half-power Beam Width

870 960
V
120

VPol Panel 870960 120 15.5dBi


Type No.

739 856

Frequency range

870 960 MHz

Polarization

Vertical

Gain

15.5 dBi

120

215

H-plane: 120
E-plane: 7.5

Front-to-back ratio

> 20 dB
50

Impedance
VSWR

Horizontal Pattern

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

dB

10

Half-power beam width

< 150 dBc


400 W (at 50 C ambient temperature)
7.5

7-16 female

Connector position

Rearside

Weight

10

10.5 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


400 N / 260 N / 890 N

Max. wind velocity

180 km/h

Height/width/depth

2254 / 258 / 103 mm

dB

Input

Vertical Pattern

VPol Panel 870960 120 16dBi


Type No.

730 382

Frequency range

870 960 MHz

Polarization

Vertical

Gain

16 dBi

120

215

Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

H-plane: 120
E-plane: 6.5
> 20 dB
50

dB

10

Half-power beam width

Horizontal Pattern

< 1.3
< 150 dBc
500 W (at 50 C ambient temperature)
6.5

Connector position
Weight

7-16 female
Rearside

10

12 kg
3

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


460 N / 300 N / 1020 N

Max. wind velocity

200 km/h

Height/width/depth

2574 / 258 / 103 mm

Mounting accessories are not included in the scope of delivery (see page 139 146)

dB

Input

Vertical Pattern

92

F-Panel
Vertical Polarization
Half-power Beam Width

17101990
V
33

VPol F-Panel 17101990 33 22.5dBi

Frequency range
Polarization
Gain
Half-power beam width

739 136
1710 1990 MHz
33

Vertical
22.5 dBi (1880 1990 MHz)
22 dBi (1710 1880 MHz)
H-plane: 33
E-plane: 4.5

10

dB

Type No.

> 25 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Wind load (at 150 km/h)

Horizontal Pattern

< 150 dBc


4.5

200 W (at 50 C ambient temperature)


7-16 female

10

Bottom or top
11 kg
Frontal / Lateral / Rearside:
540 N / 210 N / 770 N

Max. wind velocity

200 km/h

Height/width/depth

1942 / 262 / 59 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

dB

Front-to-back ratio

Vertical Pattern

93

F-Panel
Vertical Polarization
Half-power Beam Width

17101900
V
65

VPol F-Panel 17101900 65 10dBi


Type No.
Frequency range

734 304
120

1710 1900 MHz

Polarization

Vertical

Gain

10 dBi

65

> 25 dB

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position

Horizontal Pattern

< 1.3 (1710 1880 MHz)


< 1.5 (1880 1900 MHz)
< 150 dBc

55

200 W (at 50 C ambient temperature)


7-16 female

10

Bottom or top

Weight
Wind load (at 150 km/h)

50

Impedance
VSWR

1.3 kg

Frontal / Lateral / Rearside:


30 N / 5 N / 40 N

Max. wind velocity

200 km/h

Height/width/depth

182 / 155 / 36 mm

dB

Front-to-back ratio

H-plane: 65
E-plane: 55

dB

10

Half-power beam width

Vertical Pattern

VPol F-Panel 17101900 65 18dBi 2T


Type No.
Frequency range
Polarization
Gain

735 147
120

1710 1900 MHz

65

Vertical
18 dBi

Side lobe suppression


Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input

2, fixed

Horizontal Pattern

above horizon for first sidelobe


better or equal 14 dB below maximum gain
> 25 dB
50
< 1.3 (1710 1880 MHz)
< 1.5 (1880 1900 MHz)

< 150 dBc

10

200 W (at 50 C ambient temperature)

7-16 female

dB

Electrical downtilt

H-plane: 65
E-plane: 7

dB

10

Half-power beam width

Connector position

Bottom

Vertical Pattern

Weight

4.6 kg

2 electrical downtilt
first null-fill below horizon
better or equal to 25 dB
below maximum gain

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


260 N / 55 N / 310 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 36 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

94

F-Panel
Vertical Polarization
Half-power Beam Width

17101900
V
90

VPol F-Panel 17101900 90 8dBi

Polarization
Gain
Half-power beam width
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input
Connector position
Weight
Wind load (at 150 km/h)

90
180

1710 1900 MHz


Vertical
8 dBi
H-plane: 90
E-plane: 55

> 19 dB

dB

Frequency range

734 318

50

Horizontal Pattern

< 1.3 (1710 1880 MHz)


< 1.5 (1880 1900 MHz)
< 150 dBc

55

200 W (at 50 C ambient temperature)


7-16 female

10

Bottom or top
3

1.4 kg

Frontal / Lateral / Rearside:


30 N / 15 N / 40 N (at 150 km/h)

Max. wind velocity

200 km/h

Height/width/depth

182 / 155 / 49 mm

dB

Type No.

Vertical Pattern

VPol F-Panel 17101900 90 16.5dBi 2T

Polarization
Gain
Half-power beam width
Electrical downtilt
Side lobe suppression
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input

734 328

90
180

1710 1900 MHz


Vertical
16.5 dBi
H-plane: 90
E-plane: 7

2, fixed

dB

Frequency range

Horizontal Pattern

above horizon for first sidelobe


better or equal 14 dB below maximum gain
> 23 dB
50
< 1.3 (1710 1880 MHz)
< 1.5 (1880 1900 MHz)

< 150 dBc

10

200 W (at 50 C ambient temperature)

7-16 female

dB

Type No.

Connector position

Bottom

Vertical Pattern

Weight

4.6 kg

2 electrical downtilt
first null-fill below horizon
better or equal to 25 dB
below maximum gain

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


250 N / 110 N / 310 N

Max. wind velocity

200 km/h

Height/width/depth

1302 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

95

F-Panel
Vertical Polarization
Half-power Beam Width
Fixed Electrical Downtilt

17101900
V
90
2

VPol F-Panel 17101900 90 17.5dBi 2T

Polarization

Vertical

Gain

17.5 dBi

Half-power beam width


Electrical downtilt
Sidelobe suppression
Front-to-back ratio
Impedance
VSWR
Intermodulation IM3
(2 x 43 dBm carrier)
Max. power
Input

90
180

1710 1900 MHz

H-plane: 90
E-plane: 5

2, fixed

dB

Frequency range

734 330

Horizontal Pattern

above horizon for first sidelobe


better or equal 14 dB below maximum gain
> 23 dB
50
< 1.3 (1710 1880 MHz)
< 1.5 (1880 1900 MHz)

< 150 dBc

10

200 W (at 50 C ambient temperature)

7-16 female

dB

Type No.

Connector position

Bottom

Vertical Pattern

Weight

6.9 kg

2 electrical downtilt
first null-fill below horizon
better or equal to 25 dB
below maximum gain

Wind load (at 150 km/h)

Frontal / Lateral / Rearside:


380 N / 180 N / 480 N

Max. wind velocity

200 km/h

Height/width/depth

1942 / 155 / 49 mm

Mounting accessories are not included in the scope of delivery (see page 147 155)

96

Omnidirectional Antennas

Solid, reliable
construction

Omnidirectional antennas are often installed at


exposed sites on the top of masts, so special
attention has been paid to their mechnical
construction.
The exceptionally stiff fiberglass tube with
low tip deflection will withstand wind velocities
of up to 200 km/h.

Excellent grounding

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.

Environmental influences

The design of Kathrein antennas is based on


fundamental engineering knowledge and also
on decades of practical experience, during
which the various constructions and materials
used have proved their outstanding reliability.

Environmental conditions

Kathrein cellular antennas are designed to


operate under the environmental conditions as
described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard
to the following items:
Low temperature:
55 C
High temperature (dry): +60 C

Environmental tests

Kathrein antennas have passed environmental


tests as recommended in ETS 300 019-2-4.
The homogenous design of Kathreins antenna
families use identical modules and materials.
Extensive tests have been performed on typical
samples and modules.

Low intermodulation
From on our many years of experience
products (typically 150 dBc) in the construction of antennas and from our
extensive research into the effects of intermodulation, we have been able to optimize
the material used for these antennas. (The
indicated values refer to 3rd order products
measured with 2 carriers of 20 W each).
Integrated mast attachment

Integrated into the antenna base are two easily


mountable U-bolt brackets, suitable for masts
of diameters from 50 to 94 mm or 30 to 105 mm.

97

Summary Omnidirectional Antennas


800/900/1800/2000

Vertical Polarization 800/900


Type

Type No.

Connector Height
female
[mm]

Remarks

VPol Omni
VPol Omni

870960
806960

360
360

2 dBi
2 dBi

738 450
K 75 11 61

N
N

180
273

VPol Omni

890960

360

5 dBi

K 75 15 64 1

635

VPol Omni
VPol Omni

870960
870960

360
360

8 dBi
8 dBi

736 350
736 351

7-16
7-16

1543
1536

VPol Omni

824894

360

11 dBi

738 192

7-16

3237

VPol Omni
VPol Omni

870960
870960

360
360

11 dBi
11 dBi

736 347
736 348

7-16
7-16

3033
3022

inverted

104
104

VPol Omni
VPol Omni

870960
870960

360 10.5 dBi


360 10.5 dBi

736 349
738 664

7-16
7-16

2954
2856

inverted

105
105

5T
5T

indoor/outdoor

Page

99
100
101

inverted

102
102
103

Vertical Polarization Dual-band


VPol Omni

870960/17101880 360

2 dBi

738 449

216

indoor/outdoor 106

VPol Omni

824960/18052170 360

2 dBi

800 10147

216

indoor/outdoor 107

VVPol Omni 870960/17101880 360


870960/17101880 360

2 dBi
2 dBi

741 862

493

seperate
inputs

108

VVPol Omni 870960/17101880 360


19202170 360

2 dBi
2 dBi

800 10111

493

seperate
inputs

109

New Products

Vertical Polarization 1800


VPol Omni

17101880

360

8 dBi

739 785

7-16

800

VPol Omni
VPol Omni
VPol Omni

17101880
17101880
17101880

360
360
360

11 dBi
11 dBi
11 dBi

738 187
739 404
737 190

7-16
7-16
7-16

1570
1558
1560

6T

110

inverted

111
111
112

Vertical Polarization 1800/2000


VPol Omni

17102170

360

2 dBi

738 454

115

indoor/outdoor 113

VPol Omni

19202170

360

11 dBi

741 790

7-16

1387

114

98

Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use

870 960
V

VPol Omni 870960 360 2dBi

738 450

Type No.
Input

N female

Connector position

Bottom or top

Frequency range

870 960 MHz

VSWR

< 1.5

Gain

2 dBi

Impedance

50
< 150 dBc

Polarization

Vertical

Max. power

100 W (at 50 C ambient temperature)

Weight

200 g

Radome diameter

20 mm

Height

180 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

Grounding:

All metal parts of the antenna as well as


the inner conductor and the mounting kit
are DC grounded.

180 mm

Intermodulation IM3
(2 x 43 dBm carrier)

78

dB

10

Vertical Pattern

99

Omnidirectional Antennas
Vertical Polarization

806 960
V

VPol Omni 806960 360 2dBi

K 75 11 61

Type No.
Frequency range

806 960 MHz


Vertical

Gain

2 dBi

Impedance

50

VSWR

348 mm

Polarization

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

100 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached in two ways with


the supplied mounting kit:
1. On the tip of a tubular mast of 40 54 mm
diameter (connecting cable runs inside the
mast).
2. Laterally at the tip of a tubular mast of
20 54 mm diameter (connecting cable runs
outside the mast).

Material:

Radiator: Brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Grounding:

All metal parts of the antenna as well as


the inner conductor and the mounting kit
are DC grounded.

78

dB

10

Vertical Pattern

Mechanical specifications
Input
Connector position

Bottom

Weight

0.74 kg

Radome diameter
Wind load
Max. wind velocity
Packing size
On the tip

Laterally at the tip

Brackets for side mounting (see page 157 159)

N female

Height

21 mm
17 N (at 150 km/h)
200 km/h
455 x 112x 97 mm
348 mm

100

Omnidirectional Antennas
Vertical Polarization

890 960
V

VPol Omni 890960 360 5dBi

K 75 15 64 1

Type No.
Frequency range

890 960 MHz

Polarization

Vertical

Gain

5 dBi

Impedance

50

VSWR

< 1.5
< 150 dBc

Max. power

715 mm

Intermodulation IM3
(2 x 43 dBm carrier)

250 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached in two ways with


the supplied mounting kit:
1. On the tip of a tubular mast of 40 54 mm
diameter (connecting cable runs inside the
mast).
2. Laterally at the tip of a tubular mast of
20 54 mm diameter (connecting cable runs
outside the mast).

Material:

Radiator: Brass.
Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Grounding:

All metal parts of the antenna as well as


the inner conductor and the mounting kit
are DC grounded.

30

dB

10

Vertical Pattern

Mechanical specifications
Input
Connector position

Bottom

Weight

0.90 kg

Radome diameter
Wind load
Max. wind velocity
Packing size
On the tip

Laterally at the tip

Brackets for side mounting (see page 157 159)

N female

Height

21 mm
20 N (at 150 km/h)
200 km/h
825 x 112 x 97 mm
715 mm

101

Omnidirectional Antennas
Vertical Polarization

870 960
V

VPol Omni 870960 360 8dBi

736 350

Type No.
Frequency range

736 351

870 960 MHz

Polarization

Vertical

Gain

8 dBi

Impedance

50
< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

1543 mm

VSWR

< 150 dBc

Max. power

500 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass. Radome:


Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

736 350

13

dB

10

Vertical Pattern

Mechanical
specifications
Input

um
maximtop
mast

230

Connector position

736 350

736 351

7-16 female

7-16 female

Bottom

Top

Weight

5.5 kg

150

Radome diameter
Wind load
Max. wind velocity
Packing size

51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

1543 mm

1536 mm

102

Omnidirectional Antennas
Vertical Polarization

824 894
V

VPol Omni 824894 360 11dBi


Type No.

738 192

Frequency range

824 894 MHz

Polarization

Vertical

Gain

11 dBi
50

Impedance
VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc


500 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

3237 mm

Max. power

dB

10

Vertical Pattern

Mechanical specifications
Input

230

um
maximtop
mast

Connector position

Bottom

Weight

8.5 kg

Radome diameter

150

7-16 female

Wind load
Max. wind velocity
Packing size

51 mm
230 N (at 150 km/h)
180 km/h
3516 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

3237 mm

103

Omnidirectional Antennas
Vertical Polarization

870 960
V

VPol Omni 870960 360 11dBi

736 347

Type No.
Frequency range

736 348

870 960 MHz

Polarization

Vertical

Gain

11 dBi
50

Impedance
VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc


500 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

3033 mm

Max. power

736 347

dB

10

Vertical Pattern

Mechanical
specifications
Input

um
maximtop
mast

230

Connector position

736 347

736 348

7-16 female

7-16 female

Bottom

Top

Weight

8 kg

150

Radome diameter
Wind load
Max. wind velocity
Packing size

51 mm
210 N (at 150 km/h)
200 km/h
3316 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

3033 mm

3022 mm

104

Omnidirectional Antennas
Vertical Polarization
Fixed Electrical Downtilt

870 960
V
5

VPol Omni 870960 360 10.5dBi 5T

736 349

Type No.
Frequency range

738 664

870 960 MHz

Polarization

Vertical

Gain

10.5 dBi

Electrical tilt

5, fixed

Impedance

50

VSWR

< 1.5
< 150 dBc

Max. power

2954 mm

Intermodulation IM3
(2 x 43 dBm carrier)

500 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

736 349

dB

10

Vertical Pattern
5 electrical downtilt

Mechanical
specifications
Input

um
maximtop
mast

230

Connector position

736 349

738 664

7-16 female

7-16 female

Bottom

Top

Weight

8 kg

150

Radome diameter
Wind load
Max. wind velocity
Packing size

51 mm
210 N (at 150 km/h)
200 km/h
3316 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

2954 mm

2856 mm

105

Dual-band Omni Antenna


Vertical Polarization
Indoor and outdoor use

870 960 / 17101880


V

VPol Omni 870960/17101880 360 2dBi

738 449

Type No.
Input

1 x N female

Connector position

Bottom or top

Frequency range

870 960 MHz / 1710 1880 MHz

VSWR

< 1.7

Gain

2 dBi

Impedance

50
< 150 dBc

Polarization

Vertical

Max. power

50 W: 870 960 MHz


50 W: 1710 1880 MHz
(at 50 C ambient temperature)

Weight

250 g

Radome diameter

20 mm

Height

216 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

216 mm

Intermodulation IM3
(2 x 43 dBm carrier)

78

dB

10

Vertical Pattern

106

Dual-band Omni Antenna


Vertical Polarization
Indoor and outdoor use

824 960 /1805 2170


V

VPol Omni 824960/18052170 360 2dBi

800 10147

Type No.
Input

1 x N female

Connector position

Bottom or top
824 960 MHz / 1805 2170 MHz

VSWR

< 2.0

Gain

2 dBi

Impedance

50

Polarization

Vertical

Max. power

50 W: 824 960 MHz


50 W: 1805 2170 MHz
(at 50 C ambient temperature)

Weight

250 g

Radome diameter

20 mm

Height

216 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

Grounding:

All metal parts of the antenna as well as


the inner conductor and the mounting kit
are DC grounded.

216 mm

Frequency range

78

dB

10

Vertical Pattern

107

Dual-band Omni Antenna


Vertical Polarization

870 960
17101880

870 960
17101880

VVPol Omni 870960/17101880 360/360 2/2dBi

741 862

Type No.

Upper unit
870 960 MHz
1710 1880 MHz

Lower unit
870 960 MHz
1710 1880 MHz

Vertical

Vertical

2 dBi

2 dBi

Polarization
Gain
Isolation, between ports

> 25 dB

> 25 dB

Impedance

50

50

VSWR

< 1.8

< 1.8

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

50 W (at 50 C ambient temperature)

493 mm

Frequency range

130 mm

78

dB

10

Vertical Pattern

870 960
17101880

870 960
17101880

Mechanical specifications
Input
Connector position
Weight
Wind load
Max. wind velocity
Packing size

2 x N female
Bottom
1.2 kg
30 N (at 150 km/h)
200 km/h
665 x 112 x 97 mm

Height

496 mm

Radome diameter

30 mm

Bottom view
108

Multi-band Omni Antenna


Vertical Polarization

870 960
1710 1880

1920 2170

VVPol Omni 870960/17101880/1920-2170 360/360 2/2dBi

800 10111

Type No.

Upper unit
870 960 MHz
1710 1880 MHz

Lower unit
1920 2170 MHz

Vertical

Vertical

2 dBi

2 dBi

Polarization
Gain
Isolation, between ports

> 25 dB

> 25 dB

Impedance

50

50

VSWR

< 1.7

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power per input

50 W (at 50 C ambient temperature)

493 mm

Frequency range

130 mm

78

dB

10

Vertical Pattern

870 960
17101880

1920 2170

Mechanical specifications
Input
Connector position
Weight
Wind load
Max. wind velocity
Packing size

2 x N female
Bottom
0.85 kg
30 N (at 150 km/h)
200 km/h
665 x 112 x 97 mm

Height

493 mm

Radome diameter

30 mm

Bottom view
109

Omnidirectional Antenna
Vertical Polarization

17101880
V

VPol Omni 17101880 360 8dBi

739 785

Type No.
Frequency range

1710 1880 MHz


Vertical

Gain

8 dBi

Impedance

50

VSWR

807 mm

Polarization

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

200 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
one U-bolt bracket supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

13

dB

10

Vertical Pattern

Mechanical specifications
Input
130

um
maximtop
mast

Connector position
Weight
Radome diameter

104

Wind load
Max. wind velocity
Packing size
Height

Brackets for side mounting (see page 157 159)

7-16 female
Bottom
4 kg
51 mm
90 N (at 150 km/h)
200 km/h
986 x 148 x 112 mm
807 mm

110

Omnidirectional Antennas
Vertical Polarization

17101880
V

VPol Omni 17101880 360 11dBi

738 187

Type No.
Frequency range

739 404

1710 1880 MHz

Polarization

Vertical

Gain

11 dBi
50

Impedance

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

1568 mm

VSWR

< 150 dBc

Max. power

200 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

738 187

dB

10

Vertical Pattern

Mechanical
specifications
Input

um
maximtop
mast

230

Connector position

738 187

739 404

7-16 female

7-16 female

Bottom

Top

Weight

5.5 kg

150

Radome diameter
Wind load
Max. wind velocity
Packing size

51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

1568 mm

1558 mm

111

Omnidirectional Antenna
Vertical Polarization
Fixed Electrical Downtilt

17101880
V
6

VPol Omni 17101880 360 11dBi 6T

737 190

Type No.
Frequency range

1710 1880 MHz

Polarization

Vertical

Gain

11 dBi
6, fixed

Impedance

50

VSWR

< 1.3

Intermodulation IM3
(2 x 43 dBm carrier)

1560 mm

Electrical tilt

< 150 dBc

Max. power

200 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
two U-bolt brackets supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

dB

10

Vertical Pattern
6 electrical downtilt

Mechanical specifications
Input

230

um
maximtop
mast

Connector position

Bottom

Weight

5.5 kg

Radome diameter

150

7-16 female

Wind load
Max. wind velocity
Packing size

51 mm
130 N (at 150 km/h)
200 km/h
1846 x 148 x 112 mm

104

Height

Brackets for side mounting (see page 157 159)

1560 mm

112

Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use

17102170
V

VPol Omni 17102170 360 2dBi

738 454

Type No.
Input

N female

Connector position

Bottom or top
1710 2170 MHz

VSWR

< 1.5

Gain

2 dBi

Impedance

50

Intermodulation IM3
(2 x 43 dBm carrier)

115 mm

Frequency range

< 150 dBc

Polarization

Vertical

Max. power

50 W (at 50 C ambient temperature)

Weight

150 g

Radome diameter

20 mm

Height

115 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

Grounding:

All metal parts of the antenna and the mounting


kit are DC grounded. The inner conductor is not
DC grounded.

78

dB

10

Vertical Pattern

113

Omnidirectional Antenna
Vertical Polarization

19202170
V

VPol Omni 19202170 360 11dBi

741 790

Type No.
Frequency range

1920 2170 MHz

Polarization

Vertical

Gain

11 dBi
50

Impedance

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

1387 mm

VSWR

< 150 dBc

Max. power

150 W (at 50 C ambient temperature)

Mounting:

The antenna can be attached laterally at the tip


of a tubular mast of 50 94 mm diameter with
one U-bolt bracket supplied with the antenna
(connecting cable runs outside the mast).

Material:

Radiator: Copper and brass.


Radome: Fiberglass, colour: Grey.
Base: Weather-proof aluminum.
Mounting kit, screws and nuts: Stainless steel.

Excellent grounding:

From the solid metal tip right down to the base


of the high gain antennas the grounding crosssection is 22 mm2 copper or more, exceeding
EN 50083-1.
The inner conductor is coupled capacitively.

dB

10

Vertical Pattern

Mechanical specifications
Input
130

um
maximtop
mast

Connector position
Weight
Radome diameter

104

Wind load
Max. wind velocity
Packing size
Height

Brackets for side mounting (see page 157 159)

7-16 female
Bottom
5 kg
51 mm
120 N (at 150 km/h)
200 km/h
1570 x 148 x 112 mm
1387 mm

114

Indoor Antennas

These antennas have a particularly unobtrusive appearance.

Multi-band antennas
The low silhouette omnidirectional and directional antennas for AMPS, GSM, PCN, DECT, PCS, UMTS and
W-LAN in combination with broadband power splitters enable compact and inexpensive indoor networks to
be installed.

Indoor / Outdoor antennas


Unobtrusive omni antennas for both 900 and 1800 and also dual-band are now available especially
for microcell applications. These versions are similar to our Indoor Antennas, but are suitable for outdoor
operation and are fitted with an N connector.

115

Summary Indoor Antennas

Vertical Polarization

Multi-band
Type

Type No.

Frequency
range

Connector
female

Page

VPol BiDir 824960/17102170

65

5dBi

738 446

824 960 MHz and


1710 2170 MHz

117

VPol Indoor 824960/17102170

90

7dBi

742 149

824 960 MHz and


1710 2170 MHz

118

VPol Indoor 17102170

360

2dBi

741 573

1710 2500 MHz

119

VPol Indoor 824960/14252170

360

2dBi

741 572

824 960 MHz and


1425 2170 MHz

120

VPol Indoor 876960/17102500

360

2dBi

800 10137

876 960 MHz and


1710 2500 MHz

120

VPol Indoor 824960/14252170

360

2dBi

800 10177

824 960 MHz and


1425 2170 MHz

121

VPol Indoor 876960/17102500

360

2dBi

800 10173

876 960 MHz and


1710 2500 MHz

121

870 960 MHz

122

New Products

Indoor / Outdoor Single-band


VPol Omni 870960

360

2dBi

738 450

Indoor / Outdoor Dual-band / Multi-band


VPol Omni 870960/17101880

360

2dBi

738 449

870 960 MHz and


1710 1880 MHz

123

VPol Omni 17102170

360

2dBi

738 454

1710 2170 MHz

124

116

Multi-band Bidirectional Antenna


Vertical Polarization
Half-power Beam Width

824 960/1710 2170


V
65

VPol BiDir 824960/17102170 65 5dBi

738 446

Type No.
Input

1 x N female

Frequency range

824 960 MHz, 1710 2170 MHz


< 1.5
824 960 MHz: 5 dBi
1710 1880 MHz: 5.5 dBi
1880 2170 MHz: 6.5 dBi

Impedance

50

Polarization

Vertical

Max. power (total)

372 mm

Gain

400 mm

VSWR

200 W (at 50 C ambient temperature)

Weight

0.8 kg

Wind load

Frontal:
Lateral:
Rearside:

Max. wind velocity

25 N (at 150 km/h)


65 N (at 150 km/h)
35 N (at 150 km/h)
200 km/h

Packing size

422 x 212 x 95 mm

Height/width/depth

310 / 55 / 190 mm

Material:

Radiator: Tin plated copper.


Reflector: Weather-proof aluminum.
Radome: High impact plastic, colour: Grey.
All screws and nuts: Stainless steel.

Mounting:

Wall mounting: No additional mounting kit


needed.
For pipe mast mounting use clamps listed on the
datasheet (order separately).

Ice protection:

The radiating system is protected by the radome.


Due to its very sturdy construction, the antenna
remains operational even under icy conditions.

Grounding:

All metal parts of the antenna as well as the


inner conductor are DC grounded.

8.5 mm

dB

10

Typical Horizontal Pattern

117

Indoor Directional Antenna


Vertical Polarization
Half-power Beam Width

824 960 / 1710 2170


V
90

Flat design
The antenna can be operated in all frequency ranges simultaneously.

VPol Indoor 824960/17102170 90 7dBi

742 149

Type No.
Input
Frequency range
VSWR

Cable RG 223/CU of 1m length, white,


with N female connector
824 960 MHz / 1710 2170 MHz
870 960 MHz and 1710 1900 MHz: < 1.6
824 960 MHz and 1710 2170 MHz: < 2.0
7 dBi

Gain

50

Impedance

Horizontal: 90

Half-power beam width


Polarization

Vertical

Max. power

25 W (at 50 C ambient temperature)

Weight

500 g

Packing size

321 x 165 x 50 mm

Height/width/depth

205 / 155 / 42 mm

Material:

Radiator: Brass.
Radome: ABS, colour: White.
Reflector: Aluminum.
Mounting plates: Stainless steel.

Mounting:

Two holes of 6 mm diameter in the mounting


plate.

Grounding:

All metal parts inclusive the inner conductor


are DC grounded.

Available accessories:

Broadband power splitter (800 2500 MHz).

90

dB

10

Horizontal Pattern

Mounting:

Mount the attachment plate to the wall


using two screws of 4 mm diameter
in the position as indicated.

Align the antenna over the attachment


plate, keeping the cable in the middle
of the plate.

Pull the antenna downwards until


it clicks into place.

118

Indoor Omnidirectional Antenna


Vertical Polarization
Multi-band

1710 2500
V

The antenna can be operated in the total frequency range


simultaneously.
The antenna needs no additional groundplane.

VPol Indoor 17102500 360 2dBi


Type No.
Frequency range
VSWR

1710 2500 MHz


1710
1850
1920
2170

1880
1990
2170
2500

MHz:
MHz:
MHz:
MHz:

Input

1 x N female

Gain

2 dBi

Impedance

50

Polarization
Max. power (per band)
Weight
Diameter
Height

100 mm dia.

741 573
<
<
<
<

1.6
1.6
1.6
2.0

Vertical
50 W (at 50 C ambient temperature)
150 g
100 mm
50 mm (without connector)

Material:

Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.

Mounting:

Holes in the base enable a mounting on the


ceiling. Screws are supplied.
For the N connector a hole in the ceiling with
a diameter of 35 mm is required.

Grounding:

All metal parts including the inner conductor


are DC grounded.

Available accessories:

Broadband power splitters and tappers


(800 2500 MHz).

119

Indoor Omnidirectional Antennas


Vertical Polarization
Multi-band

800/2000/2500
V

The antenna can be operated in all frequency ranges


simultaneously.
The antennas need no additional groundplane.

741 572: VPol Indoor 824960/14252170 360 2dBi


800 10137: VPol Indoor 876960/17102500 360 2dBi
Type No.
Frequency range
VSWR

741 572

800 10137

824 960 MHz


1425 2170 MHz

876 960 MHz


1710 2500 MHz

< 2.0: 824 960 MHz


< 2.0: 1425 1710 MHz
< 1.6: 1710 1990 MHz
< 2.0: 1990 2170 MHz

< 1.8: 876 890 MHz


< 1.6: 890 960 MHz
< 1.6: 1710 2170 MHz
< 2.0: 2170 2500 MHz

Input

1 x N female

Gain

2 dBi

Impedance

50

Polarization

260 mm

741 572

Vertical

Max. power (per band)

50 W (at 50 C ambient temperature)

Weight
Diameter
Height

400 g

300 g

260 mm

210 mm

78 mm (without connector)

Material:

Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.

Mounting:

Three holes in the base enable a mounting on


the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.

Grounding:

All metal parts including the inner conductor


are DC grounded.

Available accessories:

Broadband power splitters and tappers


(800 2500 MHz).

min. dia. 35 mm

3 holes dia. 5 mm

dia. 160 mm

N connector, female

13 mm

Clip the protective housing into position after


the antenna has been mounted with the help
of the three supplied screws.

120

Indoor Omnidirectional Antennas


Vertical Polarization
Multi-band

800/2000/2500

New pleasant design.


The antenna can be operated in all frequency ranges
simultaneously.
The antennas need no additional groundplane.
800 10177: VPol Indoor 824960/14252170 360 2dBi
800 10173: VPol Indoor 876960/17102500 360 2dBi

265 mm

800 10177 800 10173

Type No.
Frequency range
VSWR

824 960 MHz


1425 2170 MHz

876 960 MHz


1710 2500 MHz

< 2.0: 824 960 MHz


< 2.0: 1425 1710 MHz
< 1.6: 1710 1990 MHz
< 2.0: 1990 2170 MHz

< 1.8: 876 890 MHz


< 1.6: 890 960 MHz
< 1.6: 1710 2170 MHz
< 2.0: 2170 2500 MHz

Input

1 x N female

Gain

2 dBi

Impedance

50

Polarization

800 10177

Vertical

Max. power (per band)

50 W (at 50 C ambient temperature)

Weight
Diameter
Height

480 g

340 g

265 mm

215 mm

85 mm (without connector)

Material:

Base: Aluminum.
Protective housing: High impact polystyrol,
colour: White.
Additional painting is possible.

Mounting:

Three holes in the base enable a mounting on


the ceiling. Two types of screws are supplied.
For the N connector a hole in the ceiling with a
diameter of 35 mm is required.

Grounding:

All metal parts including the inner conductor


are DC grounded.

Available accessories:

Broadband power splitters and tappers


(800 2500 MHz).

min. dia. 35 mm

3 holes dia. 5 mm

dia. 160 mm

N connector, female

13 mm

Clip the protective housing into position after


the antenna has been mounted with the help
of the three supplied screws.

121

Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use

870 960
V

VPol Omni 870960 360 2dBi

738 450

Type No.
Input

N female

Connector position

Bottom or top

Frequency range

870 960 MHz

VSWR

< 1.5

Gain

2 dBi

Impedance

50
< 150 dBc

Polarization

Vertical

Max. power

100 W (at 50 C ambient temperature)

Weight

200 g

Radome diameter

20 mm

Height

180 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

Grounding:

All metal parts of the antenna as well as


the inner conductor and the mounting kit
are DC grounded.

180 mm

Intermodulation IM3
(2 x 43 dBm carrier)

78

dB

10

Vertical Pattern

122

Dual-band Omni Antenna


Vertical Polarization
Indoor and outdoor use

870 960 / 17101880


V

VPol Omni 870960/17101880 360 2dBi

738 449

Type No.
Input

1 x N female

Connector position

Bottom or top

Frequency range

870 960 MHz / 1710 1880 MHz

VSWR

< 1.7

Gain

2 dBi

Impedance

50
< 150 dBc

Polarization

Vertical

Max. power

50 W: 870 960 MHz


50 W: 1710 1880 MHz
(at 50 C ambient temperature)

Weight

250 g

Radome diameter

20 mm

Height

216 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

216 mm

Intermodulation IM3
(2 x 43 dBm carrier)

78

dB

10

Vertical Pattern

123

Omnidirectional Antenna
Vertical Polarization
Indoor and outdoor use

17102170
V

VPol Omni 17102170 360 2dBi

738 454

Type No.
Input

N female

Connector position

Bottom or top
1710 2170 MHz

VSWR

< 1.5

Gain

2 dBi

Impedance

50

Intermodulation IM3
(2 x 43 dBm carrier)

115 mm

Frequency range

< 150 dBc

Polarization

Vertical

Max. power

50 W (at 50 C ambient temperature)

Weight

150 g

Radome diameter

20 mm

Height

115 mm

Material:

Radiator: Brass.
Radome: Fiberglass, colour: White.

Mounting:

One hole mounting (16 mm diameter) to surfaces


of max. 10 mm thickness.

Grounding:

All metal parts of the antenna and the mounting


kit are DC grounded. The inner conductor is not
DC grounded.

78

dB

10

Vertical Pattern

124

Low-loss Power Splitters and Tappers

Low-loss power splitters and tappers are used for combining antennas to obtain particular radiation
patterns or to set up indoor distribution networks.
Power splitters with the following features are available:
low-loss coaxial-line transformation
high power rating
equal (splitters) or unequal (tappers) power rating
suitability for indoor and outdoor use
extremely small dimensions
multi-band versions for 800 2500 MHz.

125

Summary Low-loss Power Splitters

Type

Type No.

2-way-Splitter 800/900
2-way-Splitter 800/900
2-way-Splitter
2-way-Splitter
3-way-Splitter
3-way-Splitter
4-way-Splitter
4-way-Splitter

8002200
8002200
8002200
8002200
8002200
8002200

2-way-Splitter 8002500
3-way-Splitter 8002500
4-way-Splitter 8002500
Additional versions on request

K 63 20 62 1
K 63 20 62 7
737
737
737
737
737
737

303
304
305
306
307
308

860 10017
860 10018
860 10019

Frequency
range

Remark

Max.
power

Connector Page
female

790 960 MHz Indoor/Outdoor 500 W


790 960 MHz Indoor/Outdoor 1000 W

N
7-16

127
127

800
800
800
800
800
800

N
7-16
N
7-16
N
7-16

128
128
128
128
128
128

N
N
N

129
129
129

2200
2200
2200
2200
2200
2200

MHz
MHz
MHz
MHz
MHz
MHz

800 2500 MHz


800 2500 MHz
800 2500 MHz

Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor
Indoor/Outdoor

200
700
200
700
200
700

W
W
W
W
W
W

Indoor
Indoor
Indoor

100 W
100 W
100 W

New Products

Summary Low-loss Power Tappers

Type

Type No.

Frequency
range

Remark

Max.
power

2-way-Tapper 8002500 7.0/1.0 dB


2-way-Tapper 8002500 10.4/0.4 dB
2-way-Tapper 8002500 15.1/0.1 dB

860 10020
860 10021
860 10022

800 2500 MHz


800 2500 MHz
800 2500 MHz

Indoor
Indoor
Indoor

100 W
100 W
100 W

N
N
N

130
130
130

500 W
500 W
500 W

7-16
7-16
7-16

131
131
131

2-way-Tapper 8002200 7.0/1.0 dB K 63 23 60 67


2-way-Tapper 8002200 10.4/0.4 dB K 63 23 61 07
2-way-Tapper 8002200 15.1/0.1 dB K 63 23 61 57

800 2200 MHz Indoor/Outdoor


800 2200 MHz Indoor/Outdoor
800 2200 MHz Indoor/Outdoor

Connector Page
female

Continuously adjustable ratio


2-way-Tapper 824960/17102170 K 63 23 60 01 824 960 MHz
5.015.0dB
1710 2170 MHz

Indoor

100 W

132

2-way-Tapper 824960/17102500
5.015.0dB

Indoor

100 W

132

860 10023

824 960 MHz


1710 2500 MHz

New Products

126

Multi-band Low-loss Power Splitters

790 960

For indoor and outdoor use.

2-way-Splitter 790960

K 63 20 62 1 K 63 20 62 7

Type No.
Frequency range

790 960 MHz

For connecting ... antennas

Insertion loss

< 0.05 dB
50

Impedance
VSWR

< 1.1

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

500 W
1000 W
(at 50 C ambient temperature)

Connector (female)

Weight

7-16
approx. 1.3 kg

Packing size

240 x 93 x 107 mm

Max. size

210 / 80 / 80 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.

Mounting:

Bracket for wall mounting included in the scope


of supply: For pipe mast mounting use clamps
listed below (order separately).

DC capability:

DC transmission between all terminations


(suitable for remote power supply systems).

Input
K 63 20 62 7

Clamps (order separately)


Type No.
736
736
736
736
736

801
802
803
804
805

Description
1
1
1
1
1

clamp
clamp
clamp
clamp
clamp

Remarks
Mast:
Mast:
Mast:
Mast:
Mast:

34
60
80
100
120

60
80
100
120
140

mm
mm
mm
mm
mm

diameter
diameter
diameter
diameter
diameter
736 805

127

Multi-band Low-loss Power Splitters

800 2200

For indoor and outdoor use.


2-way-Splitter 8002200
3-way-Splitter 8002200
4-way-Splitter 8002200

737 303 737 304 737 305 737 306 737 307 737 308

Type No.
Frequency range

800 2200 MHz

For connecting ... antennas

Insertion loss

< 0.05 dB
50

Impedance
VSWR

< 1.15

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power
(at 50 C ambient temperature)
Connector (female)

200 W

700 W

200 W

700 W

200 W

700 W

7-16

7-16

7-16

Weight

approx. 1.5 kg

Packing size

310 x 93 x 107 mm

Max. size

294 / 82 / 82 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.

Mounting:

Bracket for wall mounting included in the


scope of supply.
For pipe mast mounting use clamps listed
below (order separately).

DC capability:

DC transmission between all terminations


(suitable for remote power supply systems).

Input
737 308

Clamps (order separately)


Type No.
736
736
736
736
736

801
802
803
804
805

Description
1
1
1
1
1

clamp
clamp
clamp
clamp
clamp

Remarks
Mast:
Mast:
Mast:
Mast:
Mast:

34
60
80
100
120

60
80
100
120
140

mm
mm
mm
mm
mm

diameter
diameter
diameter
diameter
diameter
736 805

128

Multi-band Low-loss Power Splitters

800 2500

For indoor use.


2-way-Splitter 8002500
3-way-Splitter 8002500
4-way-Splitter 8002500
Type No.

860 10017 860 10018 860 10019

Frequency range
For connecting ... antennas

800 2500 MHz


2

Insertion loss

< 0.05 dB
50

Impedance
VSWR

< 1.25

< 1.25

Intermodulation IM3
(2 x 43 dBm carrier)
Max. power

< 1.3

< 150 dBc


100 W (at 50 C ambient temperature)

Connector

N female

Weight

approx. 0.6 kg

Profile cross-section

25 x 25 mm

Packing size

242 x 110 x 95 mm

Max. size

204 / 63 / 41 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.

DC capability:

DC transmission between all terminations


(suitbale for remote power supply systems).

Input
860 10019

litters
p
s
w
ne
o.:
These the Type N
e
replac 3 22 62 1
K6
1
22 63
K 63
1
22 64
K 63

129

Multi-band Low-loss Power Tappers

800 2500

For indoor use.

P1

2-way-Tapper 8002500 7.0 /1.0dB


2-way-Tapper 8002500 10.4/0.4dB
2-way-Tapper 8002500 15.1/0.1dB
Type No.

860 10020 860 10021 860 10022

Frequency range
Tap Loss
Input P1
Input P2

800 2500 MHz


1.0 dB
7.0 dB

0.4 dB
10.4 dB

For connecting ... antennas

P2

0.1 dB
15.1 dB

Insertion loss

< 0.05 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

100 W (at 50 C ambient temperature)

Connector

N female

Weight

approx. 0.5 kg

Profile cross-section

25 x 25 mm

Packing size

267 x 95 x 111 mm

Max. size

244 / 64 / 25 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.

DC capability:

DC transmission only between input and port P1.


P2 is coupled capacitively.

Input
860 10020

pers
w tap No.:
e
n
e
Thes the Type
e
replac 3 23 60 61
K6
01
23 61 1
3
6
K
5
23 61
K 63

130

Multi-band Low-loss Power Tappers

800 2200

For indoor and outdoor use.


2-way-Tapper 8002200 7.0 /1.0dB
2-way-Tapper 8002200 10.4/0.4dB
2-way-Tapper 8002200 15.1/0.1dB

P1

K 63 23 60 67 K 63 23 61 07 K 63 23 61 57

Type No.
Frequency range

800 2200 MHz

Tap Loss
Input P1
Input P2

1.0 dB
7.0 dB

0.4 dB
10.4 dB

For connecting ... antennas

0.1 dB
15.1 dB

Insertion loss

P2

< 0.05 dB

Impedance

50

VSWR

< 1.5

Intermodulation IM3
(2 x 43 dBm carrier)

< 150 dBc

Max. power

500 W (at 50 C ambient temperature)

Connector

7-16 female

Weight

approx. 1.3 kg

Packing size

310 x 93 x 112 mm

Max. size

244 / 90 / 55 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.

DC capability:

DC transmission only between input and port P1.


P2 is coupled capacitively.

Mounting:

Bracked for wall mounting included in the scope


of supply.
For pipe mast mounting use clamps listed below
(order separately).

Input
K 63 23 60 67

Clamps (order separately)


Type No.
736
736
736
736
736

801
802
803
804
805

Description
1
1
1
1
1

clamp
clamp
clamp
clamp
clamp

Remarks
Mast:
Mast:
Mast:
Mast:
Mast:

34
60
80
100
120

60
80
100
120
140

mm
mm
mm
mm
mm

diameter
diameter
diameter
diameter
diameter
736 805

131

Multi-band
Low-loss Power Tapper
Continuously Adjustable

824 960

1710 2500

5.0 15.0

5.0 15.0

For indoor use.


P1

K 63 23 60 01: 2-way-Tapper 824960/17102500 5.015.0dB


860 10023: 2-way-Tapper 870960/17102500 5.015.0dB

K 63 23 60 01 860 10023

Type No.
Frequency range

824 960 MHz and


1710 2170 MHz

Power ratio between outputs


(P2 P1)

870 960 MHz and


1710 2500 MHz

5.0 dB to 15.0 dB
continuously adjustable

For connecting ... antennas

P2

Insertion loss

< 0.1 dB

Impedance

50

VSWR

< 1.7

Intermodulation IM3
(2 x 43 dBm carrier)

Blocking unit

< 150 dBc

Max. power

100 W (at 50 C ambient temperature)

Connector

N female

Weight

0.5 kg

Profile cross-section

25 x 25 mm

Packing size

249 x 111 x 40 mm

277 x 111 x 40 mm

Max. size

235 / 100 / 25 mm

263 / 100 / 25 mm

Material:

Housing: Aluminum.
Inner conductor: Brass.
Adjustment mechanism: ASA.

DC capability:

DC transmission only between input and port P1.


P2 is coupled capacitively.

Input
860 10023

Splitting table
P2 P1 [dB]

P1 PInput [dB]

P2 PInput [dB]

5
6
7
8
9
10
11
12
13
14
15

1.2
1.0
0.8
0.6
0.5
0.4
0.3
0.3
0.2
0.2
0.1

6.2
7.0
7.8
8.6
9.5
10.4
11.3
12.3
13.2
14.2
15.1

132

Accessories
Mounting hardware and downtilt kits

3 Sector Clamp

133

Accessories

Page

Downtilt Adjustment
with adjustable electrical downtilt antennas

135

System for Remote Electrical Tilt (RET)

136

Attachment of the RCU

138

Mounting Configurations

139

A-Panels / Eurocell Panels


Dimensions

140

Three Sector Clamps and Masts

142

Clamps

143

Downtilt kits

145

F-Panels
Dimensions

147

Detailed Connector Position

149

Three Sector Clamp

150

Clamps

151

2 x F-Panel Mounting Kit

152

Downtilt kits

153

Slant Compensation

155

Azimuth Adjustment Tool

156

Omnidirectional Antennas
Clamp for larger Mast Diameters

157

Side-mounting Brackets

158

For additional information on the


mounting of antennas, please check
also our broschure:
Insta

ll
Comm ation of M
o
unica
tion N bile
etwork
Sites

134

Instructions for Antennas


with Adjustable Electrical Downtilt

Description of the interface (protective cap removed):

2
2

Adjustment wheel with


twist-lock function.
Downtilt spindle with integrated scale.

Thread for fixing of the


protective cap or the RCU
(Remote Control Unit).
Gearwheel for RCU-power
drive.

To set the downtilt angle


exactly, you must look horizontally at the scale. The
lower edge of the gearwheel
must be used for alignment
purposes.

Manual adjustment procedure:

max. 0

0 max.

Remove protective cap.

Set downtilt angle by rotating


the adjustment wheel.

Screw on the protective cap


again.

135

System for Remote Electrical Tilt (RET)

The RET system works according to the AISG standard


(Antenna Interface Standards Group).

Concept
Each manually adjustable Kathrein antenna with an
appropriate mechanical interface can be upgraded to
provide remote electrical tilt by means of a separate
remote control unit.

Further advantages:
Reduced number of antenna versions.
Upgrading can also be carried out on already installed
antennas.
The decision to upgrade the antenna with a
RET appliance may be postponed, depending in
experience/requirements.
Reduced costs for network extension.

Advantage of RET
The RET system supports UMTS systems operation
regarding cell breathing, hot spots and soft handover.

Components of the RET system


RCU (Remote Control Unit)

CCU (Central Control Unit, for indoor use)

Connecting cables

Splitter for DC power and signal

Surge protecting device

Earthing clamps (two pieces) for control cable

Optional
TMA (Tower Mounted Amplifier)

Smart Bias-T

136

System for Remote Electrical Tilt (RET)

Controlling the RCU


The major component for controlling the RCU is the
central control unit (CCU) which is located at the BTS.
There are two possible inputs for access via the OMC
or laptop:
RS 232
This input is used to configurate the system by means
of a laptop. After configuration, the input can be used
to control the RCU respectively the CCU via standard
browser.
Ethernet
The Kathrein CCU also supports the Ethernet.
The following protocols can be served: HTTP, FTP,
SNMP, XML-RPC, TCP/IP, PPP, DHCP.

Connection to the RCU is carried out via 5-wire cable,


two wires for the HDLC data, two wires for the +29 V
and +13 V power supplies and one wire for grounding.
Up to nine RCUs can be connected via splitters to one
CCU (depending on the cable length and the max.
power!).
An elegant way of controlling the RET system is to
combine a Kathrein TMA and a RCU. The control signal
and DC power supply are fed onto the RF cable via a
Smart Bias-T. The TMA decouples both of these and
feeds the individual RCUs.

If no TMA is used, a second Smart Bias-T decouples the


control signal in order to feed the RCUs.

The RCU can also be controlled via an additional cable.

137

Attachment of the RCU

Attachment of the RCU (Remote Control Unit) for remote-controlled downtilt adjustment:

Remove the protective cap


completely from the antenna.
Check the proper functioning
of the phase-shifter over the
entire adjustment range, by
twisting the adjustment wheel
in such a way that the spindle
moves completely in and out.
Reset the downtilt to the
previous value.

Completely remove the black


adjustement wheel by simply
pulling it downwards.

Push the attachment nut of


the RCU down towards the
housing.
Place the RCU carefully over
the adjustment spindle,
observing the correct alignment of the RCU with regards
to the antenna, i.e. the flat
surfaces of the attachment
fixture on the antenna side
and those inside the RCU
housing must lie flat against
each other.

Tighten the RCU attachment


nut using a torque-wrench;
wrench width = 41 mm,
max. torque = 15 Nm.
Connect the RCU control
cable immediately after
attachment of the RCU.
Please note!
In cases where a mechanical downtilt unit is installed,
this must not be set
for a downtilt of more than
14 degrees.

Push-up the RCU carefully to


the stop at the antenna.
Please note!
Do not twist the RCU in
any way during attaching to
the antenna, as this could
damage the adjustment
spindle.

138

Mounting Configurations

Small Pipe Diameter

Large Pipe Diameter

Off-set

Flat Surface

Not applicable for Eurocell Panels with connector position


rearside.

Standard Downtilt

Off-set Downtilt

139

A-Panels
Antenna Dimensions
72
64

A
B
C

256 mm
310 mm
350 mm

A-Panels
with 65 and 90 Half-power Beam Width
656 mm 1296 mm 1936 mm 2580 mm
710 mm 1350 mm 1990 mm 2634 mm
750 mm 1390 mm 2030 mm 2674 mm

A Corresponds with the antenna height mentioned in the technical data.

Bottom view

+45

-45

116

58

262

72
9

64

Dual-band A-Panels
with 65 Half-power Beam Width
A
B
C

770 mm
824 mm
864 mm

1316 mm
1367 mm
1407 mm

1916 mm
1967 mm
2007 mm

2516 mm
2567 mm
2607 mm

A Corresponds with the antenna height mentioned in the technical data.

Adjustment mechanism
with integrated scale

52

139

58

262
Bottom view

140

A-Panels / Eurocell Panels


Antenna Dimensions
72

A
B
C

64
9

Triple-band A-Panel
with 65 Half-power Beam Width
2630 mm
2681 mm
2721 mm

A Corresponds with the antenna height mentioned in the technical data.

149

Adjustment mechanism
with integrated scale

262
Bottom view

72
9

64

Eurocell Panels
A
B
C

264 mm

654 mm
974 mm 1294 mm 1934 mm 2254 mm 2574 mm
710 mm 1030 mm 1350 mm 1990 mm 2310 mm 2630 mm
750 mm 1070 mm 1390 mm 2030 mm 2350 mm 2670 mm

A Corresponds with the antenna height mentioned in the technical data.

103

Top view

258

141

A-Panels 3 Sector Panel Arrangement


Mounting Hardware
3 Sector Clamp Kit / Pipe Mast with Flange Base
Slim and unobstrusive design
Nearly cylindrical optical appearance with small outer diameter
Suitable for all A-Panels 65 and 90 (Single-band, Dual-band)
Mounting of F-Panels possible but not optimized

3 Sector Clamp Kit


Type No.
Angle between antennas
Suitable for mast diameter
Type No. of pipe mast
(please order separately)
Number of pieces

742 033

742 034

120
114.3 mm
742 035

120
139.7 mm
742 036

2 x 3 sector clamp
2 x 3 sector clamp
2 x mounting support
2 x mounting support
clamp
clamp
Material 3 sector clamp
Hot-dip galvanized steel Hot-dip galvanized steel
Mounting support
Aluminum
Aluminum
clamp
Screws
Stainless steel
Stainless steel
Outer diameter (Dout) of the
3 A-Panel Arrangement
460 mm
482 mm
64 0.5

9
3 sector clamp
E

60

Dout

Mounting support clamp


D

Torque 8 Nm
Bottom view without downtilt kit

Type No.
A
B
742 033
114.3
88
742 034
139.7 100
all dimensions in mm

C
217
236

D
207
228

E
49
49

F
45
45
D

742 036

114.3 mm

139.7 mm

6.3 mm
4 mm
3000 mm
3000 mm
210 mm
265 mm
14 1 mm
19 1 mm
170 mm
225 mm
6
6
18 1 mm
18 1 mm
M16 x 100 mm
M16 x 100 mm
Quality min. 8.8
Quality min. 8.8
60 kg
55 kg
S355 J2H (St 52-3N) DIN EN 10210-1
S235 JR G2 (RSt 37-2) DIN EN 10025

Maximum permissible load: According DIN 4131 and DIN 4132


Fatigue class K2

129 2

Pipe diameter
D
according DIN 2448
Wall thickness pipe
Pipe length
Flange diameter
Flange thickness
S
Hole circle diameter
Number of holes
Hole diameter
Enclosed bolts thread x length
Hot-dip galvanized steel
Weight
Material pipe mast
Material flange base

742 035

Type No.

3000

Pipe Mast with Flange Base

181

170
210

225
265

742 035

742 036

142

A-Panels
30 Half-power Beam Width
Mounting Hardware
A-Panels
with 30 Half-power Beam Width
A
B

11

656 mm 1296 mm 2580 mm


584 mm 1224 mm 2504 mm

A Corresponds with the antenna height mentioned in the technical data.

177

116

Side view

180.5
348
560
Bottom view

Clamps
Type No.

Description

733 736
K 61 14 03
K 61 14 04
K 61 14 05

2
2
2
2

clamps
clamps
clamps
clamps

Remarks
Mast:
Mast:
Mast:
Mast:

50 125 mm diameter
116 210 mm diameter
210 380 mm diameter
380 521 mm diameter

Weight Units per


approx. antenna
5.9
4.6
6.5
9.4

kg
kg
kg
kg

1
1
1
1

Pair of clamps K 61 14 03

Downtilt kits
Antenna height
656 mm
1296 mm
2580 mm

Downtilt angle

Type No.

Weight

0 33
0 16
0 8

733 695

3.4 kg

Downtilt kit 733 695

143

A-Panels 65 and 90 / Eurocell Panels


Mounting Hardware
Clamps
Eurocell Panels
Antenna height: 2574 mm

10

25

Eurocell Panels
Eurocell Panels
Antenna height: 654 mm
Antenna height: 264 mm
974 mm
1294 mm
1934 mm
2254 mm
and all A-Panels 65 and 90
10
3

10

25
8

25

26

65
9 4
1274
1994
2234
54

25

74

Mast diameter

Type No.

Distance A
mm

Small Pipe

28 64 mm

*731 651*

22 30

330 g

see sketch

Large Pipe

50 115 mm

738 546

19 24

1.0 kg

see sketch

2.0
2.6
4.0
5.3

see
see
see
see

Description

Off-set

60 115 mm
115 210 mm
210 380 mm
380 521 mm

733
733
733
733

677
678
679
680

117 124
146 160
148 168
150 175

Weight Units per


approx. antenna

kg
kg
kg
kg

sketch
sketch
sketch
sketch

* Not allowed for panels 742 241, 742 264, 742 265, 742 266

731 651

738 546

733 678

50 mm
26 mm

40 mm

144

A-Panels / Eurocell Panels


Mounting Hardware
Downtilt kit
Antenna height: 654
974
1294
1934
2254

/ 656 mm
mm
/ 1296 mm
/ 1936 mm
/ 2256 mm

Use the downtilt kit together with


the clamps (see page 143 and 144)

Screws supplied

12
69

15

Scale

Downtilt kit
with scale

Downtilt angle
Antenna height

Downtilt angle

Type No.

654 / 656 mm

0 30

737 972

974 mm

0 21

737 973

1294 / 1296 mm

0 16

737 974

1934 / 1936 mm

0 11

737 9751)

2254 / 2256 mm

0 9

Downtilt kit
without scale*
Type No.

Weight

737 9781)

approx. 2.8 kg

* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.

Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
1)

The downtilt kits are not allowed for panel 742 265.
145

A-Panels / Eurocell Panels


Mounting Hardware
Downtilt kits
Suitable for:
A-Panels
with an antenna height of 2580 mm

Eurocell Panels
with an antenna height of 2574 mm

Screws supplied
Screws supplied

12
69

15

0
3

12
69

Scale

15

Scale

Type No. 737 971*


Downtilt angle: 0 8

Type No. 737 976


Downtilt angle: 0 8

The downtilt kits should only be mounted with clamps 738 546
Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
* The downtilt kit is not allowed for panels 742 266, 742 241.
146

F-Panel Accessories
Dimensions of F-Panels with
33 Half-power Beam Width
Dimensions [mm]
(A corresponds to the antenna height given on the data sheet)

Front view

209

263

303

342

396

436

662

716

756

982

1036

1076

1302

1356

1396

1942

1996

2036

A B C

64
72

Top view
Radome depth 59 mm
59

262

147

F-Panel Accessories
Dimensions of F-Panels with
60 105 Half-power Beam Width
Dimensions [mm]
(A corresponds to the antenna height given on the data sheet)

Front view

182

236

266

342

396

426

502

556

586

662

716

746

702

756

786

982

1036

1066

1302

1356

1386

1622

1676

1706

1942

1996

2026

2582

2636

2666

A B C

8.5
35
64

155

69

36

49

Top view
radome depth 69 mm
25

Top view
radome depth 49 mm
25

Top view
radome depth 36 mm

155
155

148

F-Panel Accessories
Dimensions of F-Panels
Detailed connector position
Vertical Polarization
60 65 Half-power Beam Width

90 105 Half-power Beam Width

76

33 Half-power Beam Width

+45/45 Polarization

52

65 Half-power Beam Width

58

90 Half-power Beam Width

54

45

+45

65 and 90 Half-power Beam Width


adjustable electrical downtilt

45 Half-power Beam Width


Multi-band
adjustable electrical downtilt
45

30 Half-power Beam Width


Multi-band
adjustable electrical downtilt
45

65 and 90 Half-power Beam Width


2-Multi-band
adjustable electrical downtilt
48

65 Half-power Beam Width


2-Multi-band
adjustable electrical downtilt
149

F-Panels 3 Sector Panel Arrangement


Mounting Hardware
3 Sector Clamp Kit
Slim and unobstrusive design
Nearly cylindrical optical appearance with small outer diameter
Suitable for all F-Panels with an antenna housing width
of 155 mm

3 Sector Clamp Kit


Type No.

742 263

Angle between antennas


Suitable for mast diameter
Number of pieces

120
88.9 mm
2 x 3 sector clamp
2 x mounting support
clamp
Hot-dip galvanized steel
Aluminum

Material 3 sector clamp


Mounting support
clamp
Screws
Outer diameter (Dout) of the
3 F-Panel Arrangement

Stainless steel
315 mm

Remark

This clamp kit is not suitable for use


with additional mechanical downtilt kits

8.2

.9

88

168 2

180 2

65

60

64 0.5

Torque 8 Nm
Dout

+45

50

45

42

Mounting support clamp

+4

+4
5

3 sector clamp

Bottom view

150

F-Panel Accessories
Clamps for F-Panels with
33 / 60 160 Half-power Beam Width

33 HPBW

60160 HPBW

33 Half-power Beam Width


Type No.

Mast
diameter

Weight
approx.

Units
per antenna

738 546

50 115 mm

1 kg

60160 Half-power Beam Width


Type No.

734
734
734
734
734
734

Mast
diameter

360 34 60
361 60 80
362 80 100
363 100 120
364 120 140
365 45 125

738 546

mm
mm
mm
mm
mm
mm

Antenna
height
182
182
182
182
182
182

1942
1942
1942
1942
1942
1942

Weight

Units
per
approx. antenna
mm
mm
mm
mm
mm
mm

50 115 mm 182 ... 2582 mm

60 g
70 g
80 g
90 g
110 g
80 g

1
1
1
1
1
1

1 kg

Type No. 734 362

Type No. 738 546

40 mm

151

F-Panel Accessories
Mounting Hardware
2 x F-Panel Mounting Kit
For arranging two F-Panels 65, 90 side by side
(on air combining).
The mounting kit consists of two mounting plates.

2 x F-Panel Mounting Kit


Type No.

742 113

No of units
Suitable for F-Panels
65, 90 with max. height of
Material
Weight
Mounting

2
2m
Hot-dip galvanized steel
approx. 1.6 kg
Screws are supplied
270
101

640.5

12 18

19

41

20 10

75

10

116

15 15

45

640.5

Configuration without mechanical downtilt

Configuration with mechanical downtilt

03

6
9 12

15

m
10 m

Use the 2 x F-Panel Mounting Kit


together with the following mounting accessories
Type No. Description
738
733
733
733
733
737

546
677
678
679
680
978

1
1
1
1
1
1

clamp
offset clamp
offset clamp
offset clamp
offset clamp
downtilt kit

Remarks
Mast: 50 115 mm diameter
Mast: 60 115 mm diameter
Mast: 115 210 mm diameter
Mast: 210 380 mm diameter
Mast: 380 521 mm diameter
Downtilt angle:
depending on antenna height

Weight Units per


approx. antenna
1.0
2.0
2.6
4.0
5.3
2.8

kg
kg
kg
kg
kg
kg

For a three sector panel arrangement,


use the mounting kit type no. 742 113
together with the three sector clamp
(see page 150).

2
2
2
2
2
1

152

F-Panel Accessories
Downtilt Kit for F-Panels with
33 160 Half-power Beam Width
Antenna height:

342
662
982
1302
1622
1942
2582

mm
mm
mm
mm
mm
mm
mm

Use the downtilt kit together with


2 clamps 738 546 (see page 151).

Screws supplied

12
69
15

Scale

Downtilt kit
with scale
Antenna height

Downtilt angle

Type No.

342 mm

0 54

662 mm

0 30

737 972

982 mm

0 21

737 973

1302 mm

0 16

737 974

1622 mm

0 13

1942 mm

0 11

737 975

2582 mm

0 8

737 971

Downtilt kit
without scale*
Type No.

Weight

737 978

approx. 2.8 kg

* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.

Mounting a downtilt kit enlarges the spacing between mast and antenna by 84 mm.
153

F-Panel Accessories
Downtilt Kit for F-Panels with
60 160 Half-power Beam Width
Antenna height:

342
502
662
982
1302

mm
mm
mm
mm
mm

Use the downtilt kit together


with the clamps (see page 151).

Screws supplied

86
10 4 2

Scale

Downtilt kit
with scale
Antenna height

Downtilt angle

Type No.

342 mm

0 40

502 mm

0 25

732 322

662 mm

0 20

732 321

982 mm

0 14

732 318

1302 mm

0 10

732 317

Downtilt kit
without scale*
Type No.

Weight

732 327

approx. 1.0 kg

* Instructions to adjust the required downtilt angle are given in the datasheet or on the rearside of the antenna.

Mounting a downtilt kit enlarges the spacing between mast and antenna by 42 mm.
154

F-Panel Accessories
Slant Compensation Kit for F-Panels with
60 160 Half-power Beam Width
Type No. 732 319

Use the slant compensation kit


type no. 732 319 together with the
clamps (see page 151).

57 mm

77
mm

Weight: appr. 200 g

155

A-Panel / Eurocell Panel / F-Panel


Accessories
Azimuth Adjustment Tool
Type No. 738 440
Precise azimuth adjustment for mast mounted antennas can easily be achieved by using the azimuth
adjustment tool.
Elevation
This tool is suitable to all types of Eurocell Panels
compensation
Panels
Target object
A-Panels 65/ 90
F-Panels
XPol F-Panels
Target object

Scale

F-Panel

A-Panel
Clamping device

F-Panel
F-Panel

Target object

XPol F-Panel
Scale

* Move the stopper to central position


XPol F-Panel

Panel
Clamping device
Instruction:
Use a map to work out the angle between the designed antenna azimuth and target
(church, building, mountain peak).
Set this angle on the scale of the adjustment tool.
Place the adjustment tool onto the antenna and tighten the clamping device.
Use the telescope to aim at the target object, if necessary, use elevation compensation.
Then rotate the antenna until the target object appears in the telescope.
* Observe the position of the stopper when fitting the azimuth adjustment tool.
156

Side-mounting Clamp
Omnidirectional Antennas
Large Pipe
Type No. 738 908

For mast diameters of 94 125 mm

Antenna

Mast

b
a

157

Side-mounting Bracket
Omnidirectional Antennas
D

Type No. 737 398


Side-mounting bracket
(for mast diameters of 40 105 mm)
Type No.

737 398

Bracket

At the top and


at the bottom

Fits for antenna


type no:

900 MHz
736 347
736 348
736 349
736 350
736 351
738 664

1800 MHz
739 785
738 187
739 404
737 190

Side-mounting is possible for four fixed distances between the tubular mast and the antenna:

900 MHz
A = 100 mm = 0.3

1800 MHz

(holes 1 and 3)

A = 160 mm = 0.5

A = 240 mm = 0.75

A = 80 mm = 0.5
A

(hole 2)

Bracket

Antenna

Antenna base
Mast

Bracket
Hole 3
D

Pipe
D

Hole 1
D

Horizontal
Radiation Pattern

Spacing
A
Curve

Hole 3

Hole 2

Pipe
D

Horizontal
Radiation Pattern

100 mm

Spacing
A
Curve

Pipe
D
Curve

Horizontal
Radiation Pattern

Spacing
A

100 mm
40 mm
100 mm
dB

direction from mast


to antenna

80 mm

160 mm

240 mm

direction from mast


to antenna

dB

160 mm
dB

40 mm

100 mm
240 mm

direction from mast


to antenna

158

Side-mounting Brackets
Omnidirectional Antennas
900
For mast diameters of 40 105 mm

Type No.
Bracket

Fits for antenna


type no.

K 61 33 5

K 61 33 6

at the bottom
only

at both the top


and the bottom
D

K 75 11 6 ..
K 75 15 6 ..

738 779
741 558

Side mounting is possible for three fixed distances between


the tubular mast and the antenna:
100 mm = 0.3
160 mm = 0.5
240 mm = 0.75

Pipe
D

Horizontal
Radiation Pattern

Spacing
A
Curve

Additional gain
to the nominal value
of the antenna gain
A

100 mm
2 dB

160 mm
3 dB

dB

40 mm

240 mm
2 dB

direction from mast


to antenna
100 mm
2.5 dB

160 mm
3.5 dB

dB

100 mm

240 mm
0

2.5 dB

K 61 33 6

direction from mast


to antenna

159

160

General Information

Installation of a new antenna pole with a helicopter at the skiing area Brauneck Bavaria/Germany.
161

Base Station Antennas


for Mobile Communication
Networks:
GSM 850
GSM 900
NMT
TACS
AMPS
CDMA
GSM 1800
PCS
DECT
UMTS
WLL

List of available catalogues for


Mobile Communication Antennas and Accessories
790 2500 MHz Base Station Antennas
27 512 MHz Base Station Antennas

s
logue
a
t
a
c
sted
The li re also
M
a
D-RO
C
n
o
ble
availa

Ground-to-Air Communication Antennas


Antennas for Trains and Buses
80 / 160 MHz Filters, Combiners, Amplifiers for Mobile Communication
450 MHz Filters, Combiners, Amplifiers for Mobile Communication
900 / 1800 MHz Filters, Combiners, Amplifiers for Mobile Communication

162

Kathrein Antennas
Product Description (Type)

XXPol A-Panel 870960/17101880 C 65/ 60 17/18dBi 28T/2T

Polarization(s):
(X) Dual +45/ 45
(V) Vertical

Antenna Family

Frequency Range(s)

Integrated Combiner

Horizontal
Half-power Beam Width(s)

Gain Value(s)

Variable / Fixed Electrical Tilt(s)

163

Summary of Types
The articles are listed by type number in numerical order.

Type No.

Page

730 ...

Type No.

Page

Type No.

Page

Type No.

Page

733 680

144

736 855

86

738 449

106

736 866

89

738 450

99

738 454

113

738 546

144

730 368

80

733 695

78

730 370

87

733 736

78

730 376

84

730 378

90

734 ...

730 380

91

734 304

730 382

92

730 677
730 691

737 190

112

738 664

105

94

737 303

128

738 908

157

734 318

95

737 304

128

80

734 328

95

737 305

128

739 ...

81

734 330

96

737 306

128

739 136

93

734 360

151

737 307

128

739 404

111

734 361

151

737 308

128

739 489

51

734 362

151

737 398

158

739 490

27

734 363

151

737 547

83

739 491

27

734 364

151

737 549

90

739 494

28

734 365

151

737 906

82

739 495

29

731 ...
731 651

737 ...

144

732 ...
732 317

154

732 318

154

732 319

155

735 ...

732 321

154

735 147

732 322

154

732 327

154

732 689

85

732 691

81

736 ...

732 967

87

736 347

104

736 348

104

738 ...

736 349

105

738 187

736 350

102

733 ...

737 971

146

739 496

29

737 972

145

739 498

30

94

737 973

145

739 619

735 727

77

737 974

145

739 620

735 811

83

737 975

145

739 622

737 976

146

739 623

12

737 978

145

739 624

15

739 630

15

739 632

111

739 633

10

738 192

103

739 634

12

733 677

144

736 351

102

738 440

156

739 636

16

733 678

144

736 622

86

738 445

70

739 637

16

733 679

144

736 854

86

738 446

70

739 648

18

164

Summary of Types
The articles are listed by type number in numerical order.

Type No.

Page

Type No.

Page

739 649

21

741 327

41

739 650

23

741 328

739 655

20

739 658

Page

Type No.

Page

742 211

52

860 10021

130

43

742 212

54

860 10022

130

741 336

44

742 213

56

860 10023

132

18

741 344

45

742 215

55

739 660

21

741 572

120

742 218

50

K 61 ...

739 662

23

741 573

119

742 226

65

K 61 14 02

77

739 664

19

741 622

13

742 233

62

K 61 14 03

77 ...

739 665

22

741 623

26

742 234

63

K 61 14 04

77 ...

739 666

24

741 717

742 235

64

K 61 14 05

77 ...

739 684

11

741 785

742 241

69

K 61 33 5

159

739 685

14

741 790

114

742 263

150

K 61 33 6

159

739 686

17

741 794

53

742 264

66

739 695

31

741 862

108

742 265

67

K 63 ...

739 707

32

741 984

57

742 266

68

K 63 20 62 1

127

739 708

32

741 987

59

742 351

49

K 63 20 62 7

127

739 710

33

741 988

58

K 63 23 60 01

132

739 785

110

741 989

60

800

K 63 23 60 67

131

739 854

84

741 990

61

800 10111

109

K 63 23 61 07

131

739 856

92

800 10137

120

K 63 23 61 57

131

739 927

26

800 10141

741 ...

742 ...

Type No.

742 033

142

800 10147

107

K 73 ...

742 034

142

800 10173

121

K 73 22 67

79

800 10177

121

K 73 45 64 7

78

741 067

88

742 035

142

741 264

28

742 036

142

741 316

36

742 047

46

741 320

37

742 113

152

860 10017

129

K 75 11 61

100

741 322

40

742 149

118

860 10018

129

K 75 15 64 1

101

741 324

42

742 151

39

860 10019

129

741 326

38

742 192

71

860 10020

130

860

K 75 ...

165

Directional antenna designs:


A-Panels
The Advanced Antenna Technology for Cross Polarization

Compact design

Small size and elegant design characterize


this new antenna familiy.

Closed fiberglass housing

The fiberglass housing totally covers the


internal antenna components. The special
design reduces the sealing areas to a
minimum and guarantees the best weather
protection.

Environmental influences

The design of Kathrein antennas is based on


fundamental engineering knowledge and also
on decades of practical experience, during
which the various constructions and materials
used have proved their outstanding reliability.

Environmental conditions

Kathrein cellular antennas are designed to


operate under the environmental conditions
as described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with
regard to the following items:
Low temperature:
55 C
High temperature (dry): +60 C

Environmental tests

Kathrein antennas have passed environmental tests as recommended in


ETS 300 019-2-4.
The homogenous design of Kathreins
antenna families use identical modules and
materials. Extensive tests have been
performed on typical samples and modules.

65 and 90 half-power
beam width
Large variety of gain values
Electrical downtilt

The customer can choose from 65 and 90


half-power beam widths.
Gain values from 7.5 dBi up to 18 dBi, and
electrical downtilts of up to 12 are available.

Low intermodulation
After many years of experience in the
products (typically 150 dBc) construction of antennas and after intensive
research into the effects of intermodulation,
we have been able to optimize the material
used for A-Panels (the given value refers to 3rd order products measured
with 2 carriers of 20 W each).
Broadband design

These antennas primarily cover the frequency range from 806 to 960 MHz,
and are also used for Dual-band antennas. Therefore the variety of
antennas used can be kept to a minimum.

Excellent grounding

The A-Panels are DC grounded according EN 50083-1. The inner


conductors are DC grounded.

Multi-functional
installation hardware

All models are equipped with 2 fixing points. The A-Panels can be wall
mounted without any additional hardware. For mast mounting, stainless
steel brackets and mechanical downtilt kits are available. To assist the
installation technicians in aligning the antennas, an azimuth adjustment tool
can be supplied (see Accessories).

166

Directional antenna designs:


Eurocell Panels (Panels)
The Approved Antenna Family for Vertical Polarization

Compact, elegant design

Small size and elegant design are the


distinguishing features of this antenna family,
characteristics which predestine these
antennas for use in modern cellular networks.

Fiberglass radome

The grey fiberglass radomes of these antennas


are very stable and extraordinarily stiff. They
are resistant to ultraviolet radiation and can
also be painted to match their surroundings.

Environmental influences

The design of Kathrein antennas is based on


fundamental engineering knowledge and also
on decades of practical experience, during
which the various constructions and materials
used have proved their outstanding reliability.

Environmental conditions

Kathrein cellular antennas are designed to


operate under the environmental conditions as
described in ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with
regard to the following items:
Low temperature:
55 C
High temperature (dry): +60 C

Environmental tests

Kathrein antennas have passed environmental


tests as recommended in ETS 300 019-2-4.
The homogenous design of Kathreins antenna
families use identical modules and materials.
Extensive tests have been performed on
typical samples and modules.

Large variety of half-power


beam widths and gains

The customer can choose from more than


75 versions, e.g. different half-power beamwidths of 65, 90, 105, 120 and 160,
gain values from 6.5 to 18.5 dBi and electrical
downtilts of up to 15.

Electrical downtilt

Low intermodulation
After many years experience in the conproducts (typically 150 dBc) struction of antennas and after intensive
research into the effects of intermodulation, we
have been able to optimize the material used
for Eurocell panels (the given value refers to 3rd order products measured
with 2 carriers of 20 W each).
Broadband design

2 groups of antennas are available for the frequency ranges: 870 960 MHz,
optimized for GSM, 806 960 MHz, for other cellular networks.

Excellent grounding

The Eurocell Panels are DC grounded according EN 50083-1. The inner


conductors are DC grounded for DC loop monitoring.

Multi-functional
installation hardware

Depending on their length, the antennas are equipped with up to 3 fixing


points. The Eurocell Panels can be wall mounted without any additional
hardware. For mast mounting, stainless steel brackets and mechanical
downtilt kits are available. To assist the installation technicians in aligning the
antennas, an azimuth adjustment tool can be supplied (see Accessories).

167

Directional antenna designs:


F-Panels
Harmony of Design and Technology

Slim, unobtrusive design

This antenna family is especially suitable for installation at


optically sensitive sites.

Flat fiberglass radome

The max. radome depth is only 69 mm. Fiberglass material


guarantees optimum performance with regards to stability,
stiffness, UV resistance and painting. The colour of the
radome is grey.

Environmental influences

The design of Kathrein antennas is based on fundamental


engineering knowledge and also on decades of practical
experience, during which the various constructions and
materials used have proved their outstanding reliability.

Environmental conditions

Kathrein cellular antennas are designed to operate under


the environmental conditions as described in
ETS 300 019-1-4 class 4.1 E.
The antennas exceed this standard with regard to the
following items:
Low temperature:
55 C
High temperature (dry): +60 C

Environmental tests

Kathrein antennas have passed environmental tests as


recommended in ETS 300 019-2-4.
The homogenous design of Kathreins antenna families
use identical modules and materials. Extensive tests have
been performed on typical samples and modules.

Patented, gain-optimized
radiating system

The reduction of the number of components down to just


a few multi-functional parts has reduced the number of
electrical and mechanical connection points, thus also
Low intermodulation
reducing the intermodulation products (the indicated value
products (typically 150 dBc) refers to 3rd order products measured with 2 carriers of
20 W each).
Large variety of half-power
beam widths and gains
Electrical downtilt

Versions with half-power beam widths of 33 to 200 are


available (with an additional subreflector). Various gain
values of up to 22 dBi and electrical downtilt options will
aid network planners to select the version most suitable
for the intended purpose.

Excellent grounding

The F-Panels are DC grounded according EN 50083-1.


The inner counductors are DC grounded for DC loop
monitoring.

Multi-functional
installation hardware

The F-Panels can be wall


mounted without any additional
hardware. For mast mounting,
stainless steel brackets and
mechanical downtilt kits are
available. To assist the installation technicians in aligning
the antennas, an azimuth
adjustment tool can be
supplied (see Accessories).

168

Directional antenna designs:


Special Directional Antennas
For Particular Applications

Antennas for
tunnel use
railway use
micro cells (street use)
high gain link for repeaters
The distinguishing features of these special versions,
e.g. parabolic panels or log. periodic antennas, are:
very small half-power beam width (high gain)
high sidelobe suppression
also Dual-band and Multi-band versions
bidirectional horizontal pattern.

LogPer

ParPanel

BiDir
169

Sales queries, orders, catalogues


or CD-ROM:
Fax: +49 80 31 1 84-8 20
E-Mail: central.sales@kathrein.de

Technical Information:
Fax: +49 80 31 1 84-9 73
E-Mail: antennas.mobilcom@kathrein.de

Internet: www.kathrein.de
KATHREIN-Werke KG . Telephone +49 80 31 1 84-0 . Fax +49 80 31 1 84-9 91
Anton-Kathrein-Strae 1 3 . PO Box 10 04 44 . D-83004 Rosenheim . Germany

Subject to alteration.
9987.042/0103/10/ZW/HA

Please contact for:

You might also like